How to clean bronze faucets? How to remove and remove limescale from a faucet - the best remedies.

V Lately bronze sanitary ware is becoming increasingly popular. This is a spectacular externally product, endowed with all the advantages of a noble metal. But the joy of acquisition and use can be overshadowed by the appearance of stains and plaque. As part of this material we will talk about how to properly use bronze faucets, how to care for them. And, of course, we will learn the features of cleaning such a sensitive surface.

Bronze - a real impulse of modern building world. No one can resist stylish, spectacular and noble mixer taps. But during the purchase, many simply do not think about what troubles they doom themselves to. Only regular cleaning with the right products can provide the necessary disinfection in the kitchen or in the bathroom. To begin with, we want to give a few general recommendations for cleaning plumbing:

• it is necessary to select cleaning products, starting from the type of coating;
• during cleaning, pay great attention to the cleanliness of the aerator - this is where the largest number dirt, rust and pathogenic bacteria;
• do not use bronze taps for cleaning because they can damage the surface of the product;
• for cleaning, use a soft, lint-free cloth; if you use a sponge, treat the product with its soft side;
• after cleaning, wipe the faucet with glass cleaner - just a few drops of the product are enough to restore shine and radiance to plumbing.

Features of operation of bronze cranes

All those who have bronze plumbing at home are well aware that it fades rather quickly, loses the saturation and nobility of its original shade. That is why product care must be timely and, most importantly, careful. Let's look at the most effective and already proven methods.

Vinegar

If you need to clean a bronze or bathroom, use a mixture of vinegar, salt and flour - these components are sure to be in the arsenal of every modern housewife.

To prepare a miracle remedy, you will need a tablespoon of 6% vinegar, salt and wheat flour. All components must be mixed together until a homogeneous consistency is obtained, and the resulting slurry is evenly distributed over the surface of the plumbing with a soft sponge, left in this state for 10-15 minutes. After that, rinse thoroughly with cool water and wipe dry. soft cloth, better from microfiber.

tomato paste

Bronze water taps are recommended to be cleaned with tomato paste, you can replace it with fresh tomato juice, which gives at least effective result. The tarnished areas of the bronze surface should be covered with tomato paste and kept for 30-50 minutes. Then it is thoroughly washed off the surface of the plumbing with cool water, and the product itself is wiped dry.

Linseed oil

It is difficult to call this product popular, it is hardly present on the shelf of every housewife. But if flaxseed oil is present in your diet, we recommend finding one more oil for it. useful application. This is an excellent prevention of dullness and plaque on the surface of bronze plumbing. All that is required of you is to periodically apply a thin layer of oil to the faucet.

Lemon juice

Don't know how to clean bronze faucets? Use the old proven way - lemon juice. To do this, cut a medium lemon in half, sprinkle half of it with ordinary table salt, and then treat the surface of the plumbing with it.

Bronze faucets, however, as unfortunately, very quickly lose their effectiveness, become dull. Therefore, in order to return them to their original appearance and cope with even the most serious and ingrained pollution, use a special paste - Trilon-B. You can find it at an appliance care store.

Chicory

Few people know that bronze taps are great to clean with chicory powder. So, three tablespoons must be diluted with water until a rather thick slurry is obtained. The finished mixture should be evenly distributed over the surface, left for 15-20 minutes, then rinse with cool water.

sodium and potassium

In advanced cases, when pollution from the surface of a bronze tap cannot be eliminated by all of the above methods, you can resort to the help of caustic potassium and sodium. The components should be mixed in equal proportions, the resulting composition should be applied to contaminated areas sanitary ware, hold for 30-40 minutes, then rinse with water.

We fight stubborn pollution in hard-to-reach places

Modern manufacturers, trying to win the love of consumers, offer faucets of very bizarre, non-standard, to put it mildly, forms. By the way, it is they who are especially popular, but few people think about how difficult it is to clean hard-to-reach places during the purchase. Take advantage of our tricks:

• Toothbrush. With the removal of dirt in hard-to-reach places ah, an ordinary old toothbrush does a great job. With its help, it is necessary to distribute the cleaning solution over contaminated areas. An excellent remedy is baking soda with a few drops of lemon juice. If necessary, it will be necessary to make a little effort to remove all old stains.

• Dental floss. Who would have thought that ordinary dental floss would help in removing dirt from hard-to-reach places. Measure about 20-30 cm of the thread and use it to remove dirt from the joints and all hard-to-reach places. The hostesses who used this recommendation have already confirmed the effectiveness of the method.

Summing up

Timely removal of all dirt, traces of plaque from the surface of plumbing will save you from removing old stubborn stains in the future and prolong the presentable appearance of the product in the present. If you regularly follow all these recommendations, you will not only maintain the attractive appearance of plumbing, but also significantly extend its life.

Want to make your kitchen and bathroom faucets sparkle? Then just wipe them with a dry cloth constantly (that is, at least once a day). In this case, you do not have to spend time thoroughly cleaning the taps from plaque.

But if you're reading this article, chances are your faucet needs to be cleaned, not just maintained. Of course, plaque removal will take more time and effort and require little cash, but this process is also not difficult if you approach the issue wisely.

The easiest way is to clean the faucet special tool for cleaning chrome products. Just buy the tool and follow the instructions. But there is nothing to write about this method. So let's move on to folk ways cleaning chrome faucets.

Dishwashing liquid

The simplest of folk methods - clean the faucet with dish soap. Next, you should simply polish the surface of the tap to a shine with a dry cloth. Remember that this cleaning method will not remove serious pollution and limescale.

Vinegar

If the faucet has not been cleaned for a long time, then vinegar will help you in this case.. Moisten a soft cloth with vinegar, wipe the faucet with it, and the plaque will magically disappear! To carry out this operation, as, indeed, any other serious cleaning, it is better to wear gloves.

Soda

Suitable for cleaning chrome faucets and soda. Pour a little soda on a not too hard toothbrush and rub the faucet properly. After that, the chrome-plated surface can also be rubbed with a soft cloth. Soda, like vinegar, will cope even with an old plaque.

Salt

Salt will make your faucet shine. Just sprinkle some salt on a soft cloth and spread it over the surface of the chrome-plated product. Wait a while, rinse off the salt and wipe the faucet with a soft cloth.

Lemon

You can also use lemon. Squeeze its juice onto a rag and wipe down your faucet. Wash and wipe the product with a dry cloth. This method is also quite effective even in the fight against chronic plaque.

You can clean the faucet with lemon in such a simple and economical way.

• Cut a lemon in half

• Squeeze juice out of it. The juice can be used for culinary purposes, there is no point in wasting it on cleaning the faucet.

Faucets, bathrooms and kitchens often get limescale deposits. It doesn’t matter if you don’t have special cleaning products on hand. Clean the faucet or faucet from limescale ordinary lemon and baby oil will help.

Ways to remove limescale from the surface of a faucet or faucet

• Take a knife, cut lemon peel. We rub her faucet, faucet, sink. Gradually, lemon juice dissolves limescale. Now it remains to rinse the surface with water and wipe the tap with a dry cloth. The faucet shines, and the kitchen is in perfect order!

• Lime stains on faucets soap raids on mixers - eternal problems. We continue to remove them without the use of household chemicals! We take baby oil, apply on a soft cloth (a few drops are enough) and wipe the mixer. Then polish the surface with a dry cloth. Baby oil easily removes everything lime deposits on the crane soap stains and oil stains.

Descalers

For adherents of household chemicals, the market presents huge selection cleaning products for cleaning the tap or mixer from limescale.Tip: when buying a special powder, carefully read the label. Otherwise, there is a risk of saying goodbye not only to plaque, but also to your own plumbing.

Anti-corrosion inhibitors

Cheap detergents do not contain valuable anti-corrosion inhibitors. Inhibitors prevent aggressive additives from damaging the metal. With them, the entire attack is directed exclusively at lime deposits. Therefore, look for in the composition of the product: anti-corrosion inhibitors.

Sulfuric, hydrochloric or nitric acid

Acids are heavy artillery for cleaning a faucet. They decompose not only plaque and rust, but also enamel and metal coating. Means with such acids can be used only in advanced cases and only with gloves on the hands.

For daily processing, it is better to choose softer products - based on surfactants. When they get into the water, they are almost completely biodegradable, and also do not damage the skin of the hands.

What to choose: liquid or cleaning agent?

The powder has an abrasive structure and is best used for cleaning bathtubs and sinks. Caring for metal surfaces is best left to trust liquid products. Apply the product on the surface, leave for 5-10 minutes, rinse with water. And enjoy the glitter!

Tap water always contains numerous mineral substances, the concentration of which determines not only the hardness of the life-giving moisture itself, but also the condition of the faucets installed in the bathrooms. A hard-to-remove whitish coating begins to appear on them, the presence of which will not be ignored by any hostess. And in order for the taps to shine again with their chrome-plated sides, they should be cleaned comprehensively and competently. How to clean the faucet in the bathroom correctly?

What are faucets made from?

Before you clean the faucets in the bathroom, you need to figure out what they are made of. Most often, such products are made from copper, brass, bronze, or their various alloys, chrome-plated or in kind. For example, on the market you can find taps made of stainless steel and nickel with an enamel coating.

But since enamel is easily and quickly chipped off, and nickel is capable of provoking allergic reactions, it is more customary to use brass faucets. They are budget-friendly, have a wide range of products, are easy to install and fit literally any style of bathroom, from minimalism to high-tech. Fans of classicism and retro will like bronze or copper faucets, which not only look noble and impressive, but are also easy to maintain. For comparison, nickel-plated products have to be freed from plaque for a long time and diligently, while bronze products can be wiped with a dry cloth.

If we talk about what faucets can be made of, then one cannot fail to mention plastic and ceramic taps. The former are still quite rare in free sale, although they are becoming in demand among the end consumer. And that's because plastic is budget material, devoid of all the shortcomings of the metal: it does not rust and is not covered with limescale. The only negative is the fragility of plastic taps, but experts are already working on a solution to this problem.

For your information: Ceramic faucets are almost perfect solution, which simultaneously combines all the advantages of plastic and metal, but they are quite expensive.

Cleaning brass faucets

Brass is a tarnishing material that can always be restored to its original radiant appearance. And for this you do not always need to use expensive chemicals and sophisticated ways. We offer several options for how to clean the faucet in the bathroom , made of brass:

• The surface of the faucet can be wiped with a soft viscose cloth soaked in hot and concentrated soapy water. Difficult places cleaned with a brush.
• Interesting but tomato paste removes even the most stubborn dirt from brass. It is simply applied to the surface of the metal, left for half an hour, and then washed off. plain water and brush/cloth.
• A little salt is poured onto half a lemon, and the faucet itself is cleaned with it, like a brush.
• If things are really bad, then you can cook liquid mixture from salt, table vinegar and flour. The tap is removed and completely immersed in this composition for an hour, after which it is washed well.

In order to wonder as little as possible how to clean a bathroom faucet made of brass, you do not need to use metal brushes or stiff fabrics, intending to make it shine. You can also update the old lacquered layer, if there is one. And if not, then apply for the first time.

Advice: Linseed oil- This is an excellent remedy for tarnishing brass, so periodically apply it to the faucet as a preventive measure. Observe the systematic cleaning and polishing, do not neglect industrial tools that are focused specifically on brass products.

Cleaning copper faucets

Before you wash the faucet in the bathroom, made of copper, it is desirable to establish the degree of contamination. If it is low, then it is quite possible to get by with lemon-salt rubbing, as is the case with brass mixers. However, when the problem is running, the device will have to be dismantled and proceed as follows:

• Place in boiling water for half an hour, to which a little ordinary kitchen utensil is added. detergent. Then the tap is rinsed and rubbed.
• Boil it in a vinegar-salt solution, pull it out, cool and rinse, then grate.

Again, spots different color, which usually appear on copper mixers, are eliminated different ways. Greens erase 10% citric acid, yellow - with ordinary vinegar, and reddish - with 5% ammonia solution.

Bronze faucets: how to clean?

Such devices are quickly covered with a patina, which not everyone likes. As in the case of copper, before cleaning bathroom taps made of bronze, the degree of contamination is determined. The original appearance of the mixer can be returned using such purchased products as TRILON-B or GOI. The latter is sometimes mixed with gasoline to get the maximum cleaning effect. From folk methods, the following can be advised:

• A mixture of water and chicory powder;
• Boiling a dismantled tap in pea broth;
• Rubbing with solutions of caustic sodium or potassium, but only in extremely advanced cases.

Conclusion

Finally, a little about how to clean chrome-plated bathroom taps. Usually used for this purpose purchased remedy, which does not have abrasive particles in its composition. But you can do with home methods, such as wiping with dish detergent, reading with baking soda or a small amount of table vinegar.