My youngest son, he is seven years old, loves crafting. It does not matter what he works with - a designer, plasticine or cardboard - any craft in his hands turns into something important and useful for him. He especially likes when dad or mom are involved in this process. Of course, we almost never have enough time for such things, but if we get down to business, we work together and bring what we started to the end. The most serious of our joint works was a palm tree from plastic bottles.

How to make a palm tree from plastic bottles step by step with a photo

before closing kindergarten for repairs, all parents were instructed to do some crafts. The teacher told me: “Your task for the vacation is a palm tree of bottles.” We scratched our heads and got to work. Collected brown and green flowers, found a pair of long iron bars, cooked drill.

We started with the trunk: the bottom was cut off from each bottle to a height of about 20 cm. The edges were cut with teeth for texture and bent back a little so that it looked like the scales of a palm tree trunk. In each blank, I drilled a hole, the diameter of a long iron rod, which was supposed to serve as the basis for the barrel.

We cut the green bottles in half and cut the edges of each leaf shape. Necks were left on one of the halves, at the ends of the others I also drilled holes that were suitable in diameter.

Having made all the preparations, proceeded to the assembly!

How to attach palm leaves?
We take an elastic rod, not thick, but hard. When we make our leaves for plastic palm, we cut the bottles and insert them one into one, neck to neck, but on the last bottle we leave a cork. We drill a cork and thread a rod, bend the rod at the end so that the leaves do not sleep, that's all.






That's all dear readers, thank you for visiting and reading my site, I advise you to learn how to do

Then instead of throwing them away (thereby polluting environment), you can make a lot of crafts out of them.

Crafts can be made with children or on their own. Them and you can decorate the house, garden or cottage.

One of these original crafts- palm. Having created such a palm tree from plastic bottles, you can decorate any garden or cottage with it. She looks beautiful,and you don't need to be a great specialist to make it.

Palm from plastic bottles for beginners

You will need:

Plastic bottles (preferably green and Brown)

Scissors

Drill or awl

A metal rod, a straight branch or a thin plastic pipe.

* To begin with, wash all bottles and remove labels from them.

1. Cut brown plastic bottles in half, then cut the bottom half in a zigzag pattern.

2. Cut the green bottles lengthwise to get several halves. Cut the fringe on both sides of each half.

3. Make a hole (drill or awl) at the bottom of each of the brown halves. The hole should be exactly the thickness of the rod.

4. Take a rod (metal, wood or plastic) and put the brown halves of the bottles on it.

5. Green bottles (palm branches) can be attached to the top of the trunk with a thin wire that is inserted into each branch and into the trunk, and its ends are twisted.

How to make a palm tree from plastic bottles

You will need:

2 liter plastic bottles

Scissors or utility knife

Wire

Plastic or wooden rod

Glue or tape.

Making a crown

1. Cut a plastic bottle in half (crosswise). Leaves will be created from the top.

2. Cut the half of the bottle into strips that go up to the neck.

* You can also cut the bottle into 4 petals, and cut each petal several times.

3. Take the wire and start stringing blanks from green bottles (palm leaves) onto it. It is worth noting that you need to tighten the lid on the very first blank, so you can fix the petiole of the green leaf with a knot. The same should be done with the last part of the bottle.

* The palm tree with about 6-7 leaves looks beautiful.

* The base of the leaves should have a long stalk to make it easier to attach the leaves to the palm.

Making a palm tree trunk

1. Cut off the bottom of a brown bottle, leaving almost the entire bottle intact.

2. Cut the bottle from bottom to top into 5 wide strips (see image).

3. Start stringing brown blanks on a strong metal, plastic or wooden rod to get these palm tree trunks.

Gathering all the details

To attach the leaves to the trunk of a palm tree, use glue or tape. It is desirable to evenly distribute the leaves in order to obtain a symmetrical crown.

Crafts for giving in my work occupy important place. Using waste material I was able to turn the patio high-rise building to the fairy kingdom. And white birch from plastic bottles in this kingdom comes first. Such a birch is made very simply.
- So, to make such a tree from plastic bottles, we need:
- green and brown bottles for leaves,
- plastic pipe and fittings for the barrel,
- electrical cable for branches
- thin wire.

Photo 1. We make branches: we cut pieces of the electric cable - shorter for the upper branches.

Photo 2-4. Making the stem: plastic pipe we make holes and sequentially insert cable segments into them. We insert fittings into the pipe.

Photo 5. Wood frame in progress. Using this technology, you can make various trees from plastic bottles.

Photo 6-7. Consistently increase the height of the birch.

Photo 8. This is how we make the top

Photo 9. We attach the top to the tree trunk

Photo 10-11. Growing and branching branches.

Photo 11. And now we make leaves. To do this, we use plastic bottles of brown and green.

Photo 12. To make less waste, we make a sheet stencil and apply it to the middle part of the bottle

Photo 13-15. We make a hole with an awl and fasten the wire to the sheet.

Photo 16. Please note that birch leaves have different sizes and shades. We fasten the finished leaves to the branches, paint the trunk with squirrel paint, apply strokes with black red, paint the branches with green paint and the birch is ready!

Do-it-yourself palm tree from plastic bottles, how to make

This article was sent to us by a girl from Moscow, Anna Samokhvalova, « How to make a palm tree from plastic bottles with your own hands».

My youngest son, he is seven years old, loves crafting. It doesn't matter what he works with - a designer, plasticine or cardboard - any craft in his hands turns into something important and useful for him. He especially likes when dad or mom are involved in this process. Of course, we almost never have enough time for such things, but if we get down to business, we work together and bring what we started to the end. The most serious of our collaborations was a do-it-yourself palm tree made from plastic bottles.

Before the kindergarten closed for repairs, all parents were instructed to make some crafts. The teacher told me: Your vacation task is a do-it-yourself palm tree made from plastic bottles". We scratched our heads and got to work. Collected brown and green flowers, found a pair of long iron bars, cooked drill.

We started with the trunk: the bottom was cut off from each bottle to a height of about 20 cm. The edges were cut with teeth for texture and bent back a little so that it looked like the scales of a palm tree trunk. In each blank, I drilled a hole, the diameter of a long iron rod, which was supposed to serve as the basis for the barrel.

We cut the green bottles in half and cut the edges of each leaf shape. Necks were left on one of the halves, at the ends of the others I also drilled holes that were suitable in diameter.

Having made all the preparations, proceeded to the assembly!

How to attach palm leaves?
We take an elastic rod, not thick, but hard. When we make our leaves for a plastic palm tree, we cut the bottles and insert them one into one, neck to neck, but we leave a cork on the last bottle. We drill a cork and thread a rod, bend the rod at the end so that the leaves do not sleep, that's all.




That's all dear readers, thanks for visiting and reading my site, I advise you to learn how to make flowers from plastic bottles, and in general, various crafts from plastic bottles look beautiful and natural. Good luck with your crafts!!!

Palm tree from plastic bottles. Author Oksana Abramova.

I'll be happy to show you. It's very fast and fascinating process, just collect, cut and cut bottles!

Master class "Palm from plastic bottles"

Photo 1. We need brown bottles for the barrel different sizes from 1.5l to 2l or 2.5l.
We cut off a little less than half from the neck of the bottle. But I didn’t throw away the bottom of the bottle, but in parallel I collected the second barrel (above in the photo - on the right). It cuts like this. But for assembly, in the bottom, it will be necessary to cut holes with a hot knife (I heat the knife for gas stove and cut a hole of the desired diameter - the size depends on the stock on which you will put them on).

Photo 2. Cut into 8 parts to the place where the narrowing to the neck begins. And give these parts the shape of triangles

Photo 9

Photo 10. We unbend each strip in the following sequence: 1-down, 2- skip, 3-up, 4-skip and so on. That is why our foliage will look magnificent.

Photo 11. For the stock, I used metal-plastic pipe(diameter 20mm), you can adjust the height yourself.
We begin to assemble the trunk, first using parts from larger bottles and gradually (to the top of the palm tree) we move on to smaller ones. We collect them with their neck down, insert them into each other (a glass into a glass), while for each next part, the petals turn in a checkerboard pattern (in between the previous ones).
I attached the first part to a metal-plastic pipe using a narrow double adhesive tape (it sticks tightly, I tried to tear it off this year and could not), but if you don’t trust, then add a little glue.
Not reaching about 30 cm to the top of the stem, our trunk ends and foliage begins. Lay the finished leaves in a checkerboard pattern (each next leaf in the gap between the previous ones), alternating different colors bottles.
For a beautiful closure of the top of the palm tree (to have a finished look), I cut 1.5 liters in half. brown bottle, as for the barrel. Then she cut it from top to bottom into thin strips (as she cut the leaves), and gathered it together with her hands, as if wrapping it. I glued the neck of the bottle, using the same adhesive tape, to the upper edge of the pipe.
For fastening, I used reinforcement (diameter 12 mm.) 70 cm high (30 cm into the ground, 40 cm into the trunk). And on it, like on a skewer, I put on a metal-plastic pipe, that is, the finished palm tree itself.

Photo 12. ready!

Summer residents who spend the summer on their garden plots face the problem of recycling by autumn plastic containers from all sorts of soft drinks. A plastic bottle palm tree can be an unexpected way to turn trash into a garden decoration.

How is this possible? It is very simple, if you carefully study the instructions for making palm trees from bottles, prepare everything necessary tools, expendable materials, and be sure to stock up on a good mood.

Bottle palm tree: possible benefits and methods of application

As you know, the plastic used for the production of food packaging does not decompose for hundreds of years when it enters the soil. Centralized removal of this kind of garbage is not established everywhere, and no one wants to litter nearby territories with plastic waste. What should a summer resident do in such a situation? Is it really necessary to carry used plastic bottles to the city?

Don't rush! If you carefully collect bottles of brown and green plastic, in the off-season, the whole family can turn this container into an unusual evergreen tree in an evening.

A palm tree from bottles will perfectly decorate:

• house territory;
• unsightly corner of the garden;
• plot next to outbuildings;
• playground;
• a border of land near an open .

A palm tree made from plastic bottles according to the instructions below can be a spectacular decoration at any party, wedding, theme party or children's party.

Making an original decor item will not cause difficulties even for people who are far from this kind of creativity. The main thing is to prepare everything you need before making a palm tree out of plastic bottles.

What is required for a palm tree from plastic bottles?

What should be stocked up before starting work? Primarily, home master you will need plastic bottles of green and brown. Green ones are blanks for the foliage of a tree, and brown ones are the future trunks of an evergreen beauty. At the same time, the height of the plant and the splendor of the crown directly depend on the amount of collected containers.

Scroll necessary materials and tools for creating a palm tree from bottles includes:

• plastic container;
• sharp clerical knife and scissors;
• strong tape;
• metal bar or plastic tube for the barrel;
• thick rope or braided wire for the base of the leaves.

When choosing plastic bottles for palm trees, you need to take into account that trunks and leaves made from containers of the same diameter look better. If there are smaller green bottles in stock, they can be used for leaves in the middle of the crown, but brown small vessels will have to be used for tree trunks of a different type or size. different shades plastic is no problem. They will only give the man-made plant liveliness and brightness.

Bottle palm tree: instructions for making

A step-by-step description of all the subtleties of creation plastic tree will help quickly, literally in the evening, gradually a palm tree from plastic bottles of the intended height.

The process consists of three steps:

• leaf assembly;
• creating a trunk of a plastic plant;
• connection of all parts and installation of the finished tree.

Before making a palm tree out of plastic bottles, the container must be washed and all paper and film labels removed from it.

Although there are a lot of options for creating a plastic tree, the most lush long leaves with any chosen method, they are obtained from large, for example, two-liter bottles.

Making a palm tree crown from bottles

For prepared green bottles, the bottom part is cut off with a clerical knife or scissors. It is no longer needed, and the upper half will become a blank for the sheet.

It is carefully cut into thin longitudinal strips towards the neck. The larger the diameter of the plastic bottle, the thicker and more magnificent the green palm leaves will turn out.

These are not the only option for creating leaves. If a upper part cut a plastic bottle, as in the photo, into four “petals”, and then cut each of them several times, you will get beautiful feathery foliage.

The resulting leaf fragments are sequentially strung on a strong rope or a strong electrical cable. A lid is necessarily screwed onto the first blank in order to fasten the “petiole” of the sheet at the top with a knot. The last part of the bottle is twisted in the same way.

A palm tree made of plastic bottles can have a top of any size, but trees with a crown of at least 5-7 leaves look better.

At the base of the finished palm leaves there should be a long stalk in order to assemble and securely fix the entire structure later.

Assembling a palm tree trunk from bottles

To get a tree trunk that looks like a natural tree, you will need almost the entire bottle, except for the bottom itself.

From the bottom, almost to the very neck, longitudinal cuts are made on brown bottles, dividing the container into equal petals.

Only a small fragment of the bottom goes to waste

This is how the finished part of the future palm trunk from bottles looks like.

The assembly is carried out in the same way as the green leaves of the tree were collected. To secure a palm tree in an upright position, its trunk will need a strong, rigid core. It can be made from a metal bar of suitable length and diameter or a tube.

Assembling a palm tree from plastic bottles

Finished palm leaves are attached with glue or adhesive tape to the top of the tree so that they form a uniform, diverging crown on all sides.

This is what the top of the tree looks like.

The structure is quite heavy. Therefore, it is desirable to fix it with such a heavy base. If it is not possible to make a welded platform or suitable material, hard plastic or metal base stems are buried at least half a meter. Such a kind of "root" in the pit is strengthened brick chips and compacted after filling with soil. Large trees are better to be concreted.

A video on how to make a palm tree for a personal plot out of plastic bottles will explain all the nuances of the creative process, help you turn a yard or garden corner into a real oasis with your own hands.

One of the options for making palm trees from bottles - video

Today, the owners of cottages and household plots are trying in every possible way to decorate the exterior. There can be many ways, starting with landscaping and ending with some kind of buildings. One of the most budget options can be called from plastic bottles. In this article, we will tell you how to make a palm tree for your backyard from plastic bottles.

Materials for palm trees from bottles:

• green and brown plastic bottles;
• scissors;
• Metal sheet;
• metal rods;
• metal bushings and tubes;
• high voltage cable.

1. Prepare the bottles in advance and clean them from the labels. Start by making palm leaves from green bottles. To do this, cut the bottle in half.

2. Cut the strips on the top of the bottle lengthwise but not all the way through.

4. For one palm tree, you will need 7 palm leaves, the length of which you can adjust yourself.
5. To make a barrel, take brown bottles and cut wide strips on them. You should get 6 wide strips along the entire bottle of 2.5 liters.
6. Also string blanks for the barrel onto a high-voltage metal cable.
7. Start preparing the base for the palm tree.

8. Weld two metal rods (at least 25 cm long) onto a sheet of metal. The rods need to be welded under different angles.
9. Take tubes with a diameter of 2 cm, put them on the rods. Weld metal bushings onto the end of the rod so that later palm leaves can be passed through them.

11. Start assembling the barrel from the bottom up.

12. After the entire palm structure is assembled, bury it in the ground to a depth of 0.5 m.

Do-it-yourself palm tree from plastic bottles ready, now you can create a whole paradise on your personal plot. Do not be afraid to fantasize, palm trees can be of any size, and instead of coconuts, attach bright plastic bottles for juice or sweet water.

You can also come up with your own own scheme palm trees from plastic bottles.
The first plastic bottle was developed in 1941, and today it is used not only for domestic purposes and for storing water, but also as a convenient and inexpensive material for .