Products made of natural fur are always a priority for women, because it is beautiful, expensive and prestigious. But what if something happened to your favorite fur coat, it burned out in the sun, or paint got on it? It doesn't matter - after all natural fur it is quite possible to dye even at home. In order to dye natural fur, you will need the most common hair dye. Choice color palette in this case it is not limited: from fiery red to jet black. Just remember that after such dyeing, the color of the fur lasts up to eight months, after which the red fades and fades, and the black turns into dark brown and gradually turns red. You can also try to lighten the fur, but the result can be very unexpected: the muskrat becomes soft peach with a white undercoat, and the beaver turns yellow.
Before staining, it is worth holding small preparatory work. Mezdra (the lower layer of the skin) should be soaked with a fat cream, thus protecting it from drying out. Apply the paint to pre-moistened fur - the color will look deeper and lie more evenly. If you do not want to radically change the shade of the fur, then you should generally dry it a little - the color will turn out to be less intense.
After applying the paint, carefully remember the fur with your hands, rubbing the dye over the entire surface. Make sure there are no unpainted spots left. Leave the product for the same time as when dyeing hair, that is, 30-35 minutes.
After holding the right time, wash off the paint under a powerful jet of water. You can keep the skin for a few minutes in saline so that the color lasts longer and the hairs shine in the sun. Gently wring out the fur - you can lay it out on the bathroom wall and intensively run your hand over it several times.
Then lay the skin out on a surface to dry. It is better to let it drain and dry on its own. Comb the fur, setting the desired direction.
Advice from Osinka.
Skin coloring. Cheap skins, with appropriate processing and coloring, can look like expensive furs. Previously, the dyeing of furs was a very difficult matter: it was carried out using various mordants from chrompick, iron and blue vitriol etc. The introduction of aniline dyes into practice greatly simplified production, increased color strength and the range of shades obtained.
When using aniline dyes, the color appears on the fibers with the help of oxidizing agents, such as: sodium perborate, hydrogen peroxide, etc. Sodium perborate is more convenient than hydrogen peroxide, it does not decompose so quickly and is cheaper.
2. Aniline paints for skins. Skin coloring can be done in two ways. According to the first method, the entire skin is immersed in a dyeing bath (dipping dyeing), according to the second, the dyeing liquid is brushed onto the hair (pointing).
If the skins are rich in fat, then before coloring they should be treated with the following mixture: 500 g of slaked lime, 250 g iron sulphate, 150 g of alum per 10 liters of water. Apply the mixture with a brush, after which the skins are dried and washed well several times in water. Thanks to this treatment, the hair is degreased and takes color more easily.
For skins less greasy, you can use a solution of soda (6 ° B.) and soap for washing. The use of caustic soda should be avoided.
One more piece of advice.
First of all, we process the mezra as follows. With ordinary glycerin (so that not too much and not too little) we apply it on the surface of the mezra carefully so as not to touch the villi of the fur along the edges. We buy ordinary hair dye of the desired color (I note that the colors when painting light fur completely correspond to the palette of colors) henna - there will be red fur, basma-dark green. When the glycerin is slightly absorbed, we take a board and pin the fur around the perimeter with sewing pins, and paint according to the instructions attached to the selected paint. and dry it with a hairdryer. Done! If you want to make spots of a different color, then wrap the painted places in foil, there will be a beautiful spot.
Painting advice.
I am writing at the request of workers on the eve of winter.
We paint the fur, in my case there was a collar.
The coloring technology is simple - we rip off the collar - so that there is only fur, without fabric, etc.
We take hair dye - I took a black phytolinium garnier (gave the best result), we dilute the paint - the whole bottle went to my large collar, and we apply paint on a board dressed in a plastic bag with an old toothbrush.
There is such a catch - the fur is thick, the arctic fox, the mink is painted worse than the marmot - the undercoat is stained everywhere. It takes a long time and tedious to move the brush in different directions in order to evenly distribute the paint.
Leave for the time indicated on the bottle of paint. Periodically comb the fur with a brush, so that it would be taken more evenly.
Rinse off in the shower, apply (if any) balm. We wash off again. And then we prick the wet fur along the edge of the skin with needles on the board. We dry. I took it off the board when the fur was dry and the skin was semi-dry. In the process of drying, I combed it with a clothes brush. Then air dried.
At the end, it would be good to spread the mezdra with glycerin, or hand cream, or just sunflower oil.
And then - sew! smile
The main thing is not to dry it with a hairdryer, and not to let it dry without being stretched - my mink shrank after this, began to tear, in general - I ruined the fur.
But if everything is done well - my brown groundhog has become completely black, soft and smells like a pleasant balm.
Good luck!
Fur products have always been distinguished by their invulnerability to high temperature differences and other factors. external environment However, sooner or later, the fur on them may fade, lose its former luster, become stained or simply shed. However, the loss of color in a fur coat is not a sentence at all, and it is possible to restore its former brightness without resorting to specialists. And today we will look at how to dye natural fur (for example, mink and arctic fox) and artificial fur in the most effective ways.
We paint fox fur products
At very heavy pollution or discoloration, it is necessary to treat its surface with some alkaline solution. Coloring elements do not get into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaner is prepared as follows:
- 2 teaspoons of salt are added to 1 liter of water.
- 1 teaspoon of ammonia and the same amount of detergent.
- 2 teaspoons baking soda
The resulting substance should be applied to the fur with a brush. This product dries naturally.
When processing the inside of the fur coat, it should first be treated with glycerin or a fat cream. This is done to prevent it from drying out.
What color is better to choose?
The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.
Before dyeing the fur at home, you need to thoroughly moisten the fur coat in water. The usual hair dye is applied to the surface of the fur. Delay with application given substance not worth it. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in a package of 100 pcs. When applying paint to the fur, smooth the fur coat with your hand - so the substance will spread more evenly over the surface. After that, it is necessary to withstand the product for several minutes (as indicated on the paint instructions). Next, rinse the fur in warm water. It is best to add vinegar there. Now you can move on to drying. So that the fur does not “sit down” in the future, gently stretch it. Pin it with pins if necessary.
How to dye mink fur?
Mink fur is very similar in structure and appearance to human hair, so it should only be dyed with an aerosol or a spray gun at a distance of at least 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, it is necessary to carefully comb it after each application of a new layer. With the help of a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, it is necessary to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your curls, that is, ordinary hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose suitable option, then boldly apply paint on a fur coat.
Drying
As for drying, such restored products can be processed with an ordinary home hair dryer. In this case, you should periodically comb the fur so that in the future it does not fall off. To add shine to the coat, use a hair balm. It will soften the fur well and make its color more saturated.
How to dye faux fur?
First of all, you need to decide what color you will paint this fur. Although, in general, the principle of work does not differ from whether you repaint the fur coat radically or process its surface only partially. The difference is only in time.
How to dye faux fur? As in the case of natural best remedy there will be hair dye. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use resistant options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.
So you bought desired paint. What to do next? Before dyeing the fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab pre-moistened with detergent or shampoo. And one more thing - before staining, it is better to check the color of the paint in advance on a piece of paper. Sometimes it happens that the bottle does not match the specified shade. Or you just don't like it. Then you will have the opportunity to change it, and meanwhile the fur coat will not suffer from double "torture".
How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly placed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only upper part fur coats, but also its fabric base.
Wait a few minutes until all the pigment is absorbed. Exact time Each paint is different, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it off with water, shampoo if necessary. If the coat is washable, you can place it in washing machine. After that, comb the fibers with a comb and let the product dry. Comb again after drying. If the fabric base of the fur coat is not washable, remove the remaining paint from it with pieces of a cotton swab soaked in warm water.
Conclusion
So, we found out how to dye fur at home, as well as what tools you need to have available for this.
Alas, over time, the fur on our favorite fur coats loses its original appearance, changes in color and shape. But you do not need to run for a new product. The first reason is that it is far from cheap, and the second reason is that we will tell you how to dye fur at home. Of course, it should be rightly noted that not everyone decides to paint at home. Most are simply afraid to ruin the fur and prefer to entrust the product to professionals. This, of course, has its own meaning. But with our recommendations, you will be able not only not to spoil the product, but also to breathe into it new life. The fur will regain its shape, the villi will become soft, and most importantly, the color of the product will again be like new. It needs to be cleaned before painting. Without this procedure, painting can turn out with unpainted places, which will only aggravate the situation even more.
We clean the fur
For cleaning we need:
- water - 1 l;
- salt - 20 g;
- ammonia - (25%) -3 g;
- detergent - 1 g;
- soda - 2 g.
We mix and soak the product in the resulting solution for at least an hour. Next, squeeze and rinse well under running water. Dry it completely before painting.
How to dye natural fur at home
For painting we need:
- fur dye: in relation to the original color, you must choose a darker shade;
- fat cream (glycerin is also suitable);
- vinegar.
Fur dyeing at home
- After we cleaned the pile with a solution, it is necessary to stretch it on the board and fix it. This will keep the fur from sitting down.
- In order to avoid drying out of the product, its reverse side must be smeared with a greasy cream or glycerin.
- Wet the pile a little and carry out its coloring.
- Mix warm water and vinegar.
- We place the fur coat after coloring.
- The product should be dried without using a hair dryer.
As we can see, dyeing fur at home is not a big problem. It is only necessary to adhere to the rules: before painting, be sure to clean the product with a solution, on small plot check how the pile reacts to paint and lubrication of the mezra with glycerin.
How to dye fox fur at home
The painting of the arctic fox is carried out according to the same principles. You need to clean it with a solution. If there are stains on the product, they can be removed with a solution of one teaspoon of ammonia and three tablespoons of salt dissolved in one liter of water.
It is necessary to paint on a damp pile. After the paint has been infused, wash it off in the shower. This type of fur can be dried with a hair dryer.
How to dye fur at home with hair dye
It would seem that you can still dye the fur at home. It turns out that ordinary hair dye is great for this. The advantages of this method are rich color and ease of painting. Minus - such a rich color does not last so long, about six months.
- In order to radically change the color, the fur coat should be lightened using an oxidizing agent.
- Paint evenly with a special brush.
If you like experiments, try dyeing your fur coat in tonic. It will give a temporary shade, and you will definitely understand your preferences.
We figured out how and how to dye fur at home. After painting, special care is required. You can apply a hair balm dissolved in water and rinse it off the product. The fur will receive a special color, and the product will last much longer. We wish you good luck!
In some cases, dyeing the fur is indispensable. You need to dye natural fur at home if you make something from it, if the fur of the fur coat burned out in the sun while wearing it, or if you no longer like the color of your fur product.
But how to dye the fur correctly so as not to spoil it appearance? Of course, the easiest way is to contact a specialized studio. But why, if everyone can dye or toned fur at home.
If you decide to dye natural fur yourself, remember that you need to clean it first, as dirt prevents the dye from penetrating the structure of the pile.a
Important: before you start dyeing a fur coat, vest, fur collar or a headdress, treat this item with an alkaline solution that you can prepare yourself. For this you will need:
- Water - liter
- Soda - 2 tsp
- Dishwashing liquid - 1 tsp
- Ammonia from a pharmacy - 1 tsp
Fur cleaning instructions:
- Prepare the solution by thoroughly mixing all the substances.
- Apply fat cream on the mezra. This is necessary in order to prevent it from drying out.
- Using a brush, apply the solution to the pile, evenly distributing it over the entire surface.
Rinse the fur under running clean water. - Lay the fur product in a horizontal position and leave to dry at room temperature.
How to dye natural fur with hair dye?
First of all, having decided to dye natural fur yourself, you should decide on the color in which you will dye it. General recommendations come down to dyeing the fur product in darker colors. If, on the other hand, you want to color it in light color, then the fur must first be clarified with hydrogen peroxide.
You will need:
- Hair dye
- Rubber gloves
Instruction
- Before dyeing the fur of a fur coat, thoroughly soak it in water.
- Color the fur with hair dye.
- Spread the paint evenly on the surface of the fur
Soak the paint for as long as indicated in the instructions for the paint. - To wash off the dye, rinse the fur in warm water, to which you need to add a little table vinegar.
- Dry the product by straightening it and lay it out to dry in an upright position.
How to dry fur?
You need to dry the fur properly, otherwise you can irrevocably spoil its appearance.
Never dry your fur with a hair dryer, use a special steamer instead.
When drying the fur with a jet of steam, comb it with a fur brush, which can be bought at a pet store. You need to comb the fur against the growth of the pile.
To give the fur a natural shine, you can rinse it with hair balm or a solution that you can prepare at home. The use of these products will allow you to give the fur a natural shine and softness.
How to tint fur with a spray?
Usually, at home, the spray is used to tint the long tips of the fur. At the same time, the undercoat itself and the mezra remain intact.
It is necessary to spray the spray on the fur at a distance of 60-70 cm from its surface. Distribute the coloring matter slowly, smoothly moving the can from one side to the other.
As soon as the tips of the villi are dyed, comb the fur with a brush to prevent further gluing and remove excess moisture.
In addition to hair dye and spray, at home you can use tinting hair shampoo.
This instruction on how to dye fur at home is for guidance only. It is also recommended to watch a video demonstrating the whole process.
How to dye faux fur
Having decided to dye a faux fur product, decide what color you want to dye it. Perhaps it just needs to be updated, giving it freshness.
You can color faux fur with hair dye. If you need to update the color, use permanent hair dye. If you just want to freshen up the color, use a tinted hair shampoo or spray.
Before dyeing, it is recommended to clean the faux fur from traces of grease and dirt, which most often arise from contact with the skin. If the fur is not pre-cleaned, the dye may be distributed unevenly.
To clean faux fur at home, just use the usual soapy water which can be applied with a sponge.
When you start painting, make sure that the color you choose will fit well. To do this, apply paint to the pile from the wrong side of the product. If you are satisfied with the result, feel free to start painting the fur.
Important: prepare the faux fur product by laying it flat on the surface and pulling it along the edges, otherwise the fur will be stained with shreds.
When dyeing fur artificial material Strictly adhere to the instructions for hair dye.
After the time specified in the instructions comes out, wash off the paint. What's more, you can hand wash the product without using powder or shampoo. Just do it without fanaticism!
A faux fur product that is still damp should be combed and allowed to dry, and after it is completely dry, it must be combed again.