fittings for sewerage in Moscow
Polypropylene sewer fittings presented in our online store of plumbing engineering, are divisible by two large groups– fittings for external sewerage and fittings for internal sewerage. They are easy to distinguish from each other by appearance, more precisely, by color: fittings for external sewer networks are orange, and for internal ones - gray. Sewer pipes and it is advisable to select fittings of the same brand so that they fully match each other.
Polypropylene is one of the most suitable materials for creating sewer network, since it is resistant to various chemical influences, is not subject to rust and other negative impacts external environment. On the walls polypropylene sewer pipes and fittings, no organic deposits are created that reduce the permeability of pipes. Besides polypropylene pipes have a much longer service life than metal ones and are less prone to breakouts.
Unlike fittings intended for water supply and heating systems, sewer fittings are installed without the use of additional tools, threads or soldering - the pipes are simply inserted into them. This installation method is called socket. The only one additional material which is used during installation is a special lubricant or ordinary soap foam. The use of these tools will allow the sewer pipes and fittings to fit together as tightly as possible.
In addition to the usual polypropylene plumbing fittings varieties of pipeline elements - angles, crosses, plugs, couplings, tees - the group of sewer fittings includes specialized fittings, such as vacuum valves, check valves, umbrellas for internal sewerage, pipes, eccentric transitions, revisions, reductions.
Today, polyethylene pipes are used everywhere not only for cold water supply and water supply through the water supply system, but also for heating. These pipes are connected to each other using fittings. Polypropylene fittings, HDPE fittings, compression fittings, couplings for polyethylene pipes- all these are fittings for polyethylene pipes, taps also belong to them. It is worth considering in more detail their advantages and disadvantages, as well as other issues.
Construction of polyethylene pipes
Plastic plumbing parts for cold water supply and heating may have maximum dimensions in lengths of 100 and 200 meters (produced in the form of special coils), sometimes they are produced in separate sections of 12 meters. Naturally, such huge parts are not used for cold water supply and heating of a private house.
Installation of a standard water supply polyethylene pipe Drainage of water in sewer systems of entire city districts, connection of main water pipelines for cold water supply, drainage Wastewater- this is their main purpose.
Installation of polyethylene pipes is carried out, as mentioned above, using special fittings. The most common are compression fittings, which can be found on sale in any construction market.
Main settings
Actually, fittings for polyethylene pipes and plastic products themselves are classified according to 3 main indicators:
As for brands, plastic parts for cold water supply and those with which water is drained (they are not used for heating - only for cold water supply pipes) are divided into 2 types: PE-80 and PE-100.
For domestic needs PE-80 – perfect option. But PE-100 is used where there will be very high internal pressure in the water supply. With SDR everything is also very clear: it’s just an attitude internal diameter to the wall thickness. The higher this indicator, the stronger the plastic parts.
They are soldered together in the same way, regardless of whether they are used to drain water or serve for heating. Fastening with plastic parts- this is the most best option in any case, especially when it comes to compression fittings.
Wiring diagram plastic water pipe Advantages and disadvantages
Among the advantages that plastic products have are the following:
- installation of polyethylene pipes is extremely simple;
- relatively low cost;
- the impossibility of corrosion in principle (they react only to alkali and other aggressive chemicals);
- fittings for polyethylene pipes are produced in the most different options and modifications (including compression fittings, with the help of which components located at an angle are connected);
- they can be used for both water supply and heating; people also drain water and wastewater using plastic pipes;
- all fittings, including taps, are also plastic, which makes the parts light and inexpensive, and allows for connection different parts quite easily, unlike metal parts.
General layout of plastic pipes used for heating needs
Most main drawback plastic pipes – instability to ultraviolet rays.
But, of course, they also have their drawbacks:
The installation of polyethylene pipes for heating must be carried out in a closed mode, that is, the product must be placed in a special casing outside the house so that it does not simply bake in the sun.
This also applies to the elements used to connect different parts of the pipeline. Sewage drainage, as noted above, is also not always possible.
Installation features
What such products are famous for is their ease of installation and basic convenience. Installation of polyethylene pipes for heating and water supply, their connection - this can be done by any person who is at least somewhat familiar with such work.
Among the main installation features you can find the following:
The thickness of the sand and gravel substrate should be at least 10 centimeters!
Types of accessories
All accessories for such products are classified as follows:
- it can be detachable;
- it may not be detachable.
Plastic pipes more durable than metal ones One-piece ones are more reliable, but they will have to be installed using butt or even electrofusion welding. It is not difficult to guess that such fittings are used exclusively in cases where the entire structure of the water supply system will be under very high internal pressure.
There is simply no point in using one-piece fittings for the same home plumbing. Detachable means flanged, less often socket, types of various connections. Typically used in non-pressure water supply systems, although there may be exceptions to this rule.
They always have a rubberized seal, which allows you to make sure that different parts of the fittings fit as closely as possible to each other.
It is clear that in this case their connection is definitely not carried out by welding, but simply by hand.
Video
Angles (turns) are used as bends for sewerage pipelines. There are three types of rotation angle - 30, 45, 90˚ for each diameter. The internal system uses fittings of this type Ø110 ( vertical risers) and 50 mm 9horizontal distribution), in external sewers - only Ø110 mm (in rare cases - 150 mm). If earlier flow change by 90 degrees posed a risk of clogging in metal and asbestos pipes when laying external sewage systems, then with the advent of sewerage outlets made of PVC and HDPE, this precaution became unnecessary. However, many specialists, out of habit, use two 45˚ bends with a smooth change in flow direction instead of one 90˚.
In addition to corners and turns, there are also reductions, transitions from and to metal, tees, and crosses. stubs, revisions, etc. All such fittings can be used as bends, as they also have rotation angles - from 30 to 90 degrees.
Docking methods are also different. This includes socket joints, welding, and compression joints using couplings. For welding and coupling joints, the pipelines have smooth, cleaned edges. With a bell, all products have, respectively, a bell on one side and a flat end on the other. Tightness is ensured rubber rings in socket grooves (PVC bends), welding joints, compression couplings (polyethylene products).
Industry produces sewerage outlets standard sizes in accordance with GOST requirements, which facilitates the design, installation, repair, and maintenance of systems.
Video review - Bends: types and types.
Branches for internal sewerage are made of black color and are connected end-to-end or with couplings. In the first case, the edges of the parts are heated to a plastic state and pressed against each other for a time sufficient for hardening. In couplings, when manufactured in a factory, a spiral is installed, which is heated on site by a welding machine.
These sewer outlets do not need to be welded; they are inserted into the pipe sockets of the same name on one side, and put on the smooth parts of the pipes on the other. The installation speed increases several times; electric heating tools are not required. The material for outdoor use is painted a tan color, unlike the domestic sewer fittings (which are gray in color). When manufacturing a pipeline, you cannot combine various materials, PVC pipes are joined only with similar fittings, the same applies to polypropylene and polyethylene. This guarantees long service life. Sealing rubber gaskets generously lubricated with silicone, which facilitates good joining and increases sealing.
The fittings are connected by couplings and have one O-ring on each side. At the bend outer part the product is reduced, corrugation is used along the edges. These same fittings can be connected to smooth pipes other manufacturers by adding adapters with sealing collars.
The manufacturer Vavin has patented its own bell system for corrugated pipes, which has no analogues. On the outer surface there is a triangular recess, which is a lock. Double sealing allows the use of bends in pressure systems. The products of this manufacturer use high-quality raw materials, which increases their prices. The declared resource is from 50 years.
These fittings are segmental and are produced by the manufacturer in two types: 45, 90⁰ from PEND polyethylene. the ends of the products can be smooth or bell-shaped. A feature of the product is the absence of rounding, the flow changes immediately, therefore, fittings of this system are used much less often than other analogues.
(0 ) (0 )
Alexander, here best manufacturers sewer pipes:
One of the leaders in the global market for the production of plastic products is Rehau. The manufacturer specializes in producing high-quality products from high-tech materials.
Rehau pipes have the following properties:
High degree of sound insulation;
Corrosion resistance;
High strength;
Impact resistance;
Resistance to aggressive environments;
Wear resistance;
Ease.
Rehau products are widely used for internal sewage systems, as they have the best degree of noise absorption. Pipes and fittings for them are resistant to high temperatures, so they can be used in systems special appointments. Thanks to the unique manufacturing technology, such products will last at least 50 years.
Wavin is the most powerful manufacturer of plastic products in Europe. Wavin products are very popular and have won the trust of customers due to their strength characteristics. The latest scientific achievements in this field are used in the production of Vavin sewer systems.
Vavin pipes have the following characteristics:
Durability;
Reliability;
Chemical resistance;
Resistant to high temperatures;
Silence;
Lightness;
Environmentally friendly;
Durability.
Wavin produces a wide range of products for indoor and outdoor sewerage, as well as sewer wells. In the manufacture of Vavin products, PP and PVC materials are used. Internal system Wavin sewerage system features a low-noise system, which is in great demand today. Thanks to the special structure of the material, Vavin pipes surpassed even cast iron products in noise levels.
Ostendorf products are manufactured according to the latest technologies based on high quality polypropylene. Ostendorf sewerage is made of heat-resistant polymer, due to which it is highly resistant to various aggressive environments. Ostendorf pipes and fittings withstand high temperatures, which makes it possible to widely use them for internal sewerage. Ostendorf material does not burn, therefore it is used in the most fire-hazardous places. Ostendorf sewer systems also have the following distinctive features:
Light weight, which facilitates transportation and installation;
High impact resistance at low temperatures;
Ostendorf pipes and fittings have a smooth surface;
Reliable socket connections, which are produced with lip seals already installed at the Ostendorf factory;
Ostendorf pipes have a centimeter scale to simplify installation;
Ostendorf products are manufactured with different diameters - from 32 to 160 mm;
Ostendorf sewer systems have special fastenings.
The Ostendorf company produces a wide range of pipes and fittings for them. Thanks to special fittings, Ostendorf sewerage can be combined with other systems.
Pipes and fittings - it’s impossible to exist without them sewer system. The right choice of these products is due to trouble-free operation and long service life. Today there is huge selection types of fittings and pipes. What material they are made from, sizes and types, we will talk in this article.
What types of sewer pipes are there?
According to the method of water drainage The following types are distinguished:
Plastic pipes for sewerage
- internal pipes— divert water from the source of consumption (sink). As a rule, they are painted in gray colors.
- external - they drain from houses and cottages into the general sewer system.
Attention! Pipes for external sewerage, unlike internal ones, are made orange color, for easy detection in the ground.
By material from which pipes and fittings are made are divided into:
- cast iron Most sewers are made from this material. It is strong, durable (70-85 years), and can withstand heavy loads. Disadvantages include high cost and installation problems associated with heavy weight. In addition, the inner walls cast iron pipes rough, which makes it difficult for water to move and builds up over time.
Cast iron pipes
- plastic. Pipes for both internal and external sewerage are made from this material. Its main advantages are its low weight, which facilitates the process of transportation and installation, relatively low cost, as well as smooth internal walls, which reduces the percentage of congestion. There are three types of plastic pipes and fittings: PVC(mainly used for wastewater. They can withstand temperatures up to 70C, but are not resistant to aggressive environments and UV rays); polyethylene(used for pressure internal and external pipelines. They expand under the influence hot water, can withstand temperatures from -40 to +40. Not applicable for hot water); polypropylene(withstand high temperatures, resistant to acids and alkalis. Most often used to drain water from washing machines and dishwashers).
PVC pipe fittings ( external sewerage)
- pipes from of stainless steel are not very popular due to their low corrosion resistance.
- copper pipes- the most expensive, do not corrode and are neutral to acidic and alkaline environments. But their main drawback is the ability to change the color and smell of water.
Fittings for external and internal sewerage
A fitting is a part of a pipeline designed for turning, connecting, branching, changing to another size, or parts of pipes. For external pipelines, the following types of fittings are distinguished:
Fittings for internal sewerage differ from external ones in color, wall thickness and diameter.
Types of fittings
Main indicators of pipes
- 25 mm to drain water from washing machine and dishwashers;
- 32 mm from any type of siphon;
- 50 mm for piping throughout the room;
- more than 110 mm for external sewerage.
So, if you decide to lay a sewer system, you need to take into account all the basic indicators, the location of the passage, the number of transitions and turns, in order to purchase the number of pipes and fittings you need. Properly selected material and dimensions will allow the sewage system to last for a long time and without failures.
Sewage pipes: video
Sewer pipes: photo
