Sculptures for the garden from the mounting foam. "A FOX"
For the manufacture of figures you will need:
Mounting foam
Pistol for mounting foam.
Cleaner for mounting foam. (We will need to wash the gun, and for cleaning the hands)
Cotton gloves, not one pair.
For the manufacture of this figure, I used the usual empty bottle of kefir.
1 Pour sand into the bottle (for severity, so that the figure did not demolish the wind). Perfect completely surface bottle. Attention! It is necessary to properly gradually, layer behind the layer, give time for drying each layer. Save foam about 10-15 minutes.2, 3 for the manufacture of paws, tail, I used the tube with a prolit wire. Stick the tail (on it the entire figure), paws (tube), set the desired bend, interpret the joints of the joints. Neck: Paste a tube from under toilet paper, replenish. Dry out
4 Conduct paws, tail.
5 For the manufacture of the head, you can insert something round, replenish. Ears: cut from dense cardboard, soft plastic. Crighted the ears in place, clean, dry. Mustache: cut into a thick fishing line, sneaking with black paint from the cylinder, insert. Eyes are rubber balls painted by the same paint.
Sculptures from the foam to pee with oil paint, from above can be varnished (if the figure is painted not white paint, since the lacquer gives yellowness).Sculpture from the mounting foam in the garden! "Kolobok"
For the basis of the kolobka, I took a Christmas tree toy, you can plastic ball, something round. Cap ball, with a gradual drying layer per layer.
The handles are made from the tube with the proliferation of the wire. Set bend, replace. Kosyanka is also foam. "Ears" on a shell: cut from cardboard leaves, embed, clean. Sharp knife cut eyes, mouth.
Inside the legs, ordinary wooden lumps, spending the desired shape.
Scroll to oil paint, can be covered with varnish.
Crafts from the mounting foam can be made with your own hands in just a few hours.
If you have a one-time cylinder, which has not yet ended, why not use it for good landscape design.
At the same time, it is better to resort to professional foam, and not household, since it is added to it a small gun with a diameter of 2 mm.
Unusually simple and beautiful figures from the mounting foam will be the treasure of your site. They will not leave indifferent neighbors nor just passing by people.
Materials for fakes from mounting foam
You will be useful:
- gloves;
- sprayer with pre-prepared water;
- polyethylene;
- aviation kerosene.
Kerosene is needed so that at the end of work with the assembly foam, it can be easily flushed out of the building material.
It is also useful for something to create a basis for crafts from the mounting foam with your own hands.
You can take a conventional plastic bottle, old saucepan or something else, which is not sorry.
With the coating of the auxiliary material, the creation of the crafts will begin ...
It is necessary to paint them carefully, and before carrying out this procedure.
Thoroughly dry in the shade. It takes no less than a week for drying, but if the foam layer is big, it is better to wait longer.
The paint is applied to the cradle from the mounting foam with their own hands every spring re-. If this is not done, the foam can crack, and the cutting will be spoiled.
Ideas for crafts from mounting foam
If you have a small reservoir on your site, you can make green large toad. This is especially important where many plants grow, especially large-grained. In some cases, it is easier to make a lizard or crocodile - who has what happens.
In order not to guess with the size and "fill the hand," can be accessed on the plasticine. No matter how strange sounded, but it was after samples on this simple material, it turns out to make chic crafts from the mounting foam.
The same applies to the test - if you like to bake delicious buns, pour animals - it will help to figure out that you will get better.
A great solution is to make turtles from the mounting foam. And it is not necessary to have on the plot of water. In addition, the white paint is almost everyone, and it costs it is now cheaper than colored.
Turtles are easier to paint, their shells can be alternating with natural. If there were bugs during the creation of the crafts, which should not be, they can be cut off with a sharp knife.
Similarly, the situation will have to and with rounded items - if they need to be sharpened, it is too easy to cut off.
Withdrawal from the mounting foam, not only street species are decorated, they can be done for home. Funny frogs will cause smiles by passing people!
So, a snowman can be made as the original New Year decor from the foam, but it is necessary to start creating in advance so that the material well manage to dry.
If you see the foam before the deadline, it quickly cracks.
How the creators wake up
A man as a matter is intelligent to create. Often creative qualities are found literally on the level place and where they are not waiting at all. Just just one inner push. For example, a blog post with illustrations. And comments: "Oh, what a beauty! And where did you buy? Made themselves? And how? From what?". The last question is usually clarified several times. After a while - joyful: "Oh, girls, I got it!". And immediately embarrassed: "Do not tell my husband, otherwise I spent all his assembly foam ...". And others rejoice: "Hooray! Another self-relocine appeared at the cottage!"
Foam assembly
Mounting foam, it is a polyurethane foam sealant, was invented another 60 more than a year ago, but actively in construction began to be used only in the 1980s of the Swedes. With it, the door and window blocks are mounted, "treat" seams and cracks, isolate communication. Concise in the aerosol cylinder it takes very little space. The mounting foam released from there is rapidly increased in the amount of up to 40 times and freezes (polymerizes) to a rigid state, acquiring light yellow color. It does not endure direct sunlight: first darkens, and then begins to crack. The ease of decorating the mounting foam and its availability bribed people with a seamless and creative vein. At the cottages and country areas, homemade garden sculptures began to appear massively, relatively cheap compared to finished products.
Basic tools
Mind out the mounting foam (and not cheap, as it is worse than the form) is best of all from a professional reusable gun with a handle and a metal nozzle - only it is capable of adjusting the volume of portions. So that the gun does not turn into one-time, at the end of the work it is necessary to rinse with the purifier of the mounting foam. The foam itself is very sticky, so work in thin household gloves. The exceptions are cases when you need to fix a slightly cutting figure - here you need moistened with water. When the mass is finally dried, you can cut any crafts from the mounting foam, weigh the sharp stationery knife.
And we have such a frame
Even for the most simple sculpture, the basis for which foam will be applied. That is the frame. Fantasy herself will tell you what is best to use. For example, for a kolobka itself, an old children's ball is like, for a hefty mushroom, Borovik - a plastic bottle (leg) and a round box from under sweets (a hat); A charming donkey framework can be collected from a decider bottle, tin cans and wooden trimming. Part of the frame can be bent out of the wire (for example, the tail of the lizard or swan neck). So that the crafts from the mounting foam were not only beautiful, but also resistant, drag them (sand in PET bottle will be quite enough).
Apply and strengthen
The room where you will create from the mounting foam should be well ventilated. You can arrange a workshop and outdoor, but only in dry weather. Apply foam on the frame gradually: do not rush to the next layer until the previous one will dry (no more than a quarter of an hour). Created by your hands, crafts from the mounting foam must be protected from cracking by putty. It is best for this acrylic putty or a dry building mixture with a pasty acrylic supermarket. Another method is gauze bandages, measured in cement mortar: they need to pave the entire figure.
Brush famous masters
For painting your garden sculptures, use acrylic or oil paints of any colors. Before painting, give a product to "relax" a few days. It is necessary to paint with your own hands, armed with thick brushes. Put one paint layer - wait until it does, and Kraft again; should lie down several layers. So that the sculpture is not only bright, but also glitter, check it out. For this, polyurethane varnish for concrete floors is perfect. At the same time and add strength. Everything! Your crafts from the mounting foam are waiting for their tasted place, where they will calmly stand under the sun and the rain. But when winter comes, it is better to remove them into a warm and indoor room. Just in case.
You can have the opportunity to go beyond the city - this is great, and if the rest will take place on your own summer cottage, is generally beautiful. But here are only standard cottages on which we see only cucumbers, tomatoes, potatoes and other necessary vegetables and fruits, more cure longing than the desire to rest. Yes, and do not want to work in such an atmosphere. And what if you attach a bit of fantasy and effort and turn your country site into the present miracle? Believe me, your household after the transformation of the cottage will not want to return to the city. And so that such a reincarnation takes place, you will need crafts for the garden with your own hands. What do we mean? See, read, choose and inspire.
Original crafts for the garden and cottages with their hands from girlfriend
Of course, today, most agricultural shops and flower kiosks offer a variety of garden sculptures, pots and other beauty. But this is not cheap, this is not cheap: to completely convert your plot, you will need to lay out a round sum. Is there a desire to spend? Not? Then you got there where you need. We will tell me how to create all this beauty with your own hands from materials that will be almost every surfacing owner.
So, in this section of our site, ideas are collected that deserve to take a place on your site. We suggest you to get acquainted with the technology of making a bedside of tires, original flower beds from plastic bottles, bird figures, animal gnomes of their same bottles and other materials. And together with us you can create real locks for your children, small fountains, relax corners, etc.
In addition to the "traditional" materials, we will let us go to the move and are at all unusual, for example, old printing machines, corps of various toy machines, children's buckets and much more. In principle, from our articles you will learn that you can decorate your garden or the country area, and such crafts for the garden will definitely be pleased with your loved ones and guests.
Collection of ideas for crafts
Our articles and reviews are devoted not only to materials from which you can create, but also a variety of ideas.
We will tell you what exactly you can create in your country. How do you like the idea of \u200b\u200bsuch crafts for the garden with your hands like:
- garden gnomes and other fabulous heroes;
- children's slides;
- fountains;
- hammocks and sun beds;
- benches;
- swing;
- flower beds and flower beds;
- plants figures;
- japanese stone gardens;
- original chairs and lounge chairs;
- gaming zones;
- domoki and Shalashi;
- bunches and birds for birds;
- interestingly decorated booths.
Do you think this is the whole list? In vain! This is only a small part of what can be placed on your summer cottage.
Location of crafts in the garden or on the plot
Firmly think of and performing the crawl, you need to find a place for it on the site. Therefore, a number of articles we devoted to the way you can place everything you create.
In the articles there are a lot of descriptions of different gardens and cottages with photos, where you will see entire family of pigs that walk in the garden, swans made of tires, swept in flowers, which are located near the porch of the house, and so on.
IMPORTANT When placing the site, do not overdo it and correctly combine the crafts for the garden with your own hands. The fact is that a large journey only will just repel.
How to connect different crafts, create entire plots of them, organize a seating area and games - all this will be considered in our materials.
Together with us will do not just easily, the main thing is interesting!
Garden figures with their own hands from the mounting foam are quite easy to make, for this it will be needed by a minimum of girlfriend. Armed with a cartoon with mounting foam, you can make it possible to make practically any shape that will become a real decoration of your garden.
With the help of a plastic bottle and mounting foam, you can independently make an original garden figure.
How to make a stork from the mounting foam?
It will take:
- plastic eggplant from under the water;
- thick wire;
- styrofoam;
- stationery Scotch;
- mounting foam;
- wooden chips;
- electrodes (for bird feet);
- acute knife;
- poultry feathers;
- paint and varnish for facade works.
The stork made from the mounting foam with his own hands will become a highlight of your garden. First of all, it is necessary to build a framework, which will later be covered by the mounting foam. The framework of the frame is a plastic eggplant from under water for 5 liters. From the side of the bottom is the head of the bird, the neck serves as a tail.
The neck of the stork is made of thick wire: a small piece of foam is applied to the bottle, poured it with a wire at an angle in such a way that the wire rested into the wall of the eggplant. For the manufacture of the head of the birds take a small piece of foam of the rounded shape, sitting onto the end of the wire. The nose is made of wooden chips or a small cut wire.
Bird's feet are made of electrodes that have failed, and metal fittings can also be used for this. In places, the foot joints with the torso put the pieces of foam, since the top of the stork has thickening. The stork will be inserted into the Earth electrodes, so the figure does not require additional weighting, but if desired, you can fill with a sandbag.
For wings, flat pieces of foam plastic are suitable in the form of a semicircle - they are attached to the wire to the sides of the eggplant. In order to make the frame of the necessary strength, it is wrapped with a scotch. Work starts from the head, gradually moving towards the base of the bird's feet. No electrodes are not needed.
PVA glue is used for primer.
After all parts are fastened, proceed to the formation of a form with a mounting foam. The foam is squeezed out by small zigzags or stripes, while you do not need to try to accurately repeat the contours of the bird, as everything is superfluous. Important: foam is placed with subtle layers with a mandatory intermediate drying. This building material dries quickly enough, so the next layer can be applied after 15-30 minutes.
After the foam freeze, proceed to the formation of the sculpture: with the help of a sharp knife, it is covered with everything too much. It remains only to paint a stork. In order to reduce the paint consumption, it is necessary to apply primer, which forms a protective film and will not allow porous foam to absorb paint. As a primer, PVA glue, diluted with water in proportion 1: 2. The neck and body of the birds are painted in white, the tips of the wings and the tail part - in black, nose and legs are covered with red paint. The result is fixed with any facade varnish. At the end of the work in the tail hole (neck of the bottle) insert a beam of real guisy, ducks or rooster. Aist's figure is placed on a flowerbed, blocking the electrodes (legs) to the ground.
How to make a donkey from the mounting foam?
It will take:
- eggplant from under water by 10 l;
- can;
- wire;
- acute knife;
- mounting foam;
- adhesive gun or double-sided tape;
- wooden boards (for feet);
- facade putty;
- primer;
- facade paint and varnish.
Figures from the mounting foam can be small or large, it all depends on your imagination and available materials. For the manufacture of the donkey, there will be a plastic eggplant from under water by 10 liters. For the head, a tin can, and if there is no such farm, it is possible to use a cropped eggmarket for 5 liters. The legs of the donkey are made of wooden dug, tail - from wire or stapper. The head and legs are glued with a glue pistol or double-sided adhesive, the tail is inserted under a small angle in the hole made in advance.
In order to drag the figure, you need to fill the eggmarket with dry sand - do it better after the glue is dry.
In the manufacture of garden figures, a special gun for mounting foam is used.
The prepared frame impose layers of mounting foam. It is necessary to give the previous layer to dry for 15-20 minutes, only after that the next layer of foam is applied.
The ears of the donkey are made of wire, which is bent in the form of a semicircle. Then the wire frame is winding with scotch or paper, insert the donkey, after which they are imposed on the ears of the mounting foam. Next, the foam is cut by a knife in such a way as to give the figure the desired shape.
So that the sculpture looks believable, it is necessary to apply a facade putty on top of the mounting foam, pre-reloading the product. The primer improves the grip of the materials, so you should not ignore this process. For crude putty, minor details are working: cut out the nostrils, the animal's eyes make. After drying, the putty on the surface is passed by sandpaper with small grain. The donkey figure is painted with acrylic facade paint, and then covered with waterproof varnish.
Muffin Mounting Foam
It will take:
- plastic bottle;
- styrofoam;
- wire;
- stationery knife;
- primer;
- facade putty;
- acrylic facade paint and varnish.
Make mushrooms from the mounting foam is even a child, for this you do not need to possess the talent of the sculptor or artist. For the manufacture of the feet of the mushroom it will take a plastic bottle. To give a stability figure, the bottle is filled with pebbles or dry sand. A foam applies to the bottle in such a way that it turns out the thickening characteristic of the fungus. Peno is distributed by thin layers with an intermediate drying.
For the manufacture of a mushroom hats take a foam, cut out a circle from it, and it is not necessary to try to repeat the exact shape, as in nature there are no mushrooms with perfect round hats. The foam applies foam in such a way that the cone is gradually formed. The mushroom is inserted into the mushroom with a durable wire, the cap is embraced on it, the location of the parts can be mounted with glue. Then the last layer of foam is applied, give it to frozen, after which it is covered with everything too much.
Mounting foam - a porous material that easily absorbs moisture, so the product must be primed. If this is not done, then the moisture from the putty will go into foam, which will make the finishing material more dry, and subsequently this can lead to cracking surface. If there is no primer in the farm, it can be replaced by gelatin. Gelatin is soaked in cold water (15 g per 100 ml), give it to swell, after which they melt in a water bath. Melted gelatin is diluted with warm water. This solution is treated with a figure of 2-3 times with an intermediate drying.
Next, a facade putty is applied to the fungus (can be replaced by plaster) and leave until complete graze. The surface is grinding first with medium grain sandpaper, then an fine-grained paper is used. The product is ground again - if this is not done, then the consumption of paint will double. The mushroom hat is painted in a brown color, for the legs used to bleel with the addition of ocher. Work is covered with facade or yacht varnish in 2-3 layers.
Garden figures from the mounting foam will make the atmosphere of comfort, will make the estate individually and unique. Make fungus, stork or donkey for everyone, if you show a little fantasy and get the necessary materials.