In this article you will find many interesting ideas of the design of ceilings with photos and description. Learn why not everywhere you can use drywall, and how stretch ceilings will help you avoid a flood from the neighbors!
Deciding to start repair, you have to choose the color palette of the room, choose the way of finishing walls, ceiling and floor, find the optimal combination of practicality, aestheticness and, of course, prices. If you explore the possibilities of modern finishes, you can save the lion's share of the family budget, since everyone is well known as unplanned alterations can lead to huge, irrational waste.
Choose a ceiling option
Any cosmetic repair begins with the ceiling, from its completion, design and design depends in many ways in general. To date, the options for finishing the ceiling is a huge set. They are selected, based on the preferences of the owners, the appointment of the room and, of course, the cost. When an acute is worth the issue of savings, classic budget options are selected - coloring and whitewashes, or polystyrene plates. Relatively inexpensive, but also more practical and aesthetic are suspended ceilings. And, of course, when the issue of the price of repair is not so acute, the choice may fall on elite stretch ceilings.
Let's try to describe in detail every finish type to help choose the optimal option.
One of the most ancient, time-consuming and dirty ways requiring an ideally smooth ceiling surface with neat ceiling stoves. Everyone remembers how many whitewings have to be flush from the floor and furniture after painting or plain ceiling. In addition, it is quite difficult to achieve an ideal monophonic surface without divorce with the help of a chalk solution or paint for the ceiling.
On the other hand, coloring and whitewas - was and remains the most fiscal option for repair. And it is impossible not to admit that a qualitatively reconstructed painted ceiling looks rather neat and aesthetic. Plus, at its discretion, you can tint white color with other shades.
It is less "dirty" and a time-consuming method than whitewashes, but the same inexpensive, especially along with suspended and tensioning systems. Design options - a huge set, from the combinations of wallpaper of different drawings before their staining in any color.
If you use special for the ceiling (ideally, liquid wallpapers), they will retain the initial look for a long time. It is not recommended to use them in the bathroom or in the kitchen. In addition, the ceiling is unlikely to grab the surfaces of the ceiling, so the past surface should be as smooth as possible.
Polystyrene plates
This version of the finishes are very similar to the pasting wallpaper, so we will not stop on it for a long time. The only one, in contrast to the wallpaper, ceiling tiles made of polystyrene foams are able to resist moisture and smooth the small flaws of the ceiling surface.
Finishing with plastic panels
A good option to finish the ceiling are PVC panels. They are durable, durable, possess good sound insulation and resistant to moisture and high temperatures. The latter allows you to use them with LED and halogen dot luminaires. PVC panels perfectly mask the irregularities of the ceiling, pipes and wiring. In general, this is a budget alternative to more expensive tail and suspended ceilings.
Plasterboard ceilings
This is a universal and inexpensive inside ceiling, which allows you to embody all sorts of design ideas to life, hide any surface defects, irregularities, backlight, wiring, etc.
Perhaps the only minus of plasterboard, in its fear of moisture, so it is not suitable for the bathroom. Otherwise, plasterboard - almost perfect finishing material.
Benefits:
- Obstruction of any, even untreated surface;
- The ability to hide wiring, pipes, ceiling seams and other irregularities;
- Obtaining an absolutely smooth and smooth surface;
- Creation of a multi-level ceiling;
- Carrying out the built-in lighting system;
- Excellent thermal insulation and the ability to maintain a microclimate indoor;
- Safety;
- Heat resistance and non-causing;
- Low cost, compared with stretch ceilings.
Unlike previous finishing methods, the installation of plasterboard panels will have to be tinked - install the frame, mount the plates, carry out a subsequent decorative finish. Depending on the irregularities of the ceiling and the volume of hidden wires and communications, it is possible to lose 5-10 cm of height. On the other hand, these are minor disadvantages, because as a result you get a beautiful, inexpensive, perfectly smooth ceiling of the design you like.
If you are interested in finishing the ceilings with plasterboard, be sure to read!
In addition to the aforementioned ceilings made of drywall, the tail ceilings can be performed from tree fiber plates (Fiberboard) and MDF. These are durable, safe, moisture-resistant finishing coatings, huge color and textured diversity.
Plates of MDF and DVP can imitate wood, tile, unprocessed brickwork or natural stone. The surface of the plates is easy to paint with enamel and oil paints, is covered with a film, decorated with rails and other elements, thereby creating imitation of beams. Such a stevy ceiling will create the "Effect of an expensive ceiling" and embody many interesting design solutions.
Dropped ceilings
The most popular view of the ceilings of the average price category. The suspension ceiling is a design when various finishing materials are fixed on a wooden or metal frame. With it, you will easily hide all the flaws and irregularities of the ceiling, wiring and communications, you can carry out a climate ventilation system, install built-in lamps.
Distinguish:
- Cassette ceilings - durable, durable, moisture resistant and fireproof steel or aluminum plates (cassettes), more often used in public areas - restaurants, hotels, offices, medical institutions, etc.
- Armstrong type ceilings are a budget finish, which has been widespread, both for administrative premises and home rooms. It is simple in installation, inexpensive, aesthetic plates made of extruded mineral fibers with thermal insulation, fire resistance and increased reflectibility, which makes it easy to save on lighting.
- Rush ceilings are a very durable, shockproof, moisture-resistant and fireproof metal ceiling. It does not need so-filing care, not subject to rotting, does not accumulate dirt and dust.
- Mirror ceilings - allow you to create a rich, spacious and stylish design with a lot of light and depth space.
The last kind of ceilings - elite modern fashionable stretch ceilings. In addition to the fact that this type of design looks very expensive and stylish, it is also a fairly practical way to finish the ceiling.
- Stretch ceilings create an absolutely perfect surface, hide asymmetrical forms of the room, close all irregularities and communications;
- Stretch ceilings hold a considerable weight, in case you are solved to flood the neighbors;
- The material does not miss moisture, which allows it to use it in all rooms without exception.
- A very large variety of design - from the choice of color or texture (matte, glossy or satin) before applying photo printing, sequined, jewelry and other things.
Unfortunately, the installation of tension ceilings will not be installed without minuses:
- This is the most expensive type of finish;
- They can only be installed by professionals with special equipment (gas gun);
- The canvas is afraid of mechanical damage, sharp items, easily punctured.
Stretch ceilings are not installed in cold rooms without heating or with temperatures below +5 They lose their technological properties.
Choose the design of the ceiling depending on the room
Now you know the features of each finish type and can make a choice.
But remember that the selection of the material finishing material is highly dependent on the place. It is impossible to glue the ceiling in the bathroom, and hope that in a month the appearance of the ceiling will remain in its original form. Most likely, yours will go divorces if they do not dug at all.
In the living room
In the kitchen
- This is a place with constant evaporation, temperature drops and special requirements for hygienicness, so the kitchen ceiling must be moisture-resistant, fireproof, environmentally friendly and easy. Pokes and painting the ceiling in the kitchen, as well as pasting with wallpaper, have long passed into the past, due to their short-life. On such ceilings, divorces, stains, are quickly appear, they are trembling, dug out, and due to the large accumulation of steam becomes an excellent medium for the reproduction of fungi.
If there is a question of the price, it is better to use laminated polystyrene tile or relatively inexpensive PVC panels.
With large irregularities, the best solutions will be plaster, suspended or stretch ceilings.
To the bathroom
Requirements are the same as for the kitchen. Due to the large number of evaporations, the risk of accumulating fungi and pathogenic bacteria, the need to regularly clean the surfaces, there are no drywall ceilings in the bathroom, ceilings, marked with wallpaper or chipboard, and DVP without special impregnation.
Few people can boast a large area of \u200b\u200bthe bathroom, so the perfect option will be suspended robes and mirror ceilings, which will expand the space, add more light and gloss.
Plus, they are quite easy to care for them, they are perfectly cleaned by divorces and plaque.
A more expensive alternative can perform a stretch ceiling, which is also perfect for the bathroom.
Choose a ceiling for home
For Khrushchevka
The small height of the ceilings in Khrushchev, unfortunately, is not a myth, but harsh reality. The maximum height is 2.40 m or even less if the apartment was replaced and the tie of the floor. Naturally, in such conditions it is quite difficult to install a suspended or stretch ceiling, which steals from the already small height of 5-10 cm. But it is still possible if the real surface of the ceiling does not have too large transitions, and the ceiling can be installed with a minimum loss of space .
For modern new buildings
Unlike Khrushchev, with the choice of ceiling for new buildings is much simpler. Here and the height of the ceilings is greater, and the quality is newer, so you can choose almost any type of finish. One should only take into account that within 2-3 years, a new building will take place a little, which can affect the geometry of the premises. Therefore, finishing materials, especially for the ceiling, should be installed with some reserve. Ideally, all types of suspended and tensioning systems will be ideal for new buildings.
For a private house
In a private house there is an acute issue of thermal insulation, therefore the ceiling material should keep warm in the house well. Since the external ceiling coating must also take into account the layer of insulation (from clay, mineral wool or foam), it is best to use frame structures - suspended and stretch ceilings.
For suspended ceilings, the frame was first collecting for fastening an external ceiling (cassettes, drywall, etc.), and then in the space between profiles, lay a layer of insulation. For stretch ceilings, on the contrary, first create a frame of bars for the insulation, lay it, but only then stretch the external cloth.
From the selection of the source of lighting and the correct placement of light depends on which room you will receive as a result - small and dark, large, but cold or warm and cozy.
Chandeliers and lamps
Classic lighting option - chandelier in the center of the ceiling. It gives a lot of warm light, it is perfectly suitable for almost any kind of interiors, gives the room an exquisite comfort.
Remember about the mass of the lamp! A heavy chandelier is unsafe to mount on light plasterboard, it is better to mount it to the concrete base of the ceiling.
Unfortunately, this type of lighting is not too suitable for modern suspended and stretch ceilings, so the built-in lighting will gradually change.
Spotlights
- Allow you to create the necessary lighting around the perimeter of the entire ceiling and make a certain pattern from it if it is provided by the designer;
- Easy installation of lamps and replace light bulbs;
- Safety. Spot lamps do not heat the ceiling;
- Rotary models allow you to change the direction of lighting as needed;
- This is a relatively inexpensive way of lighting.
LED ribbons
A very non-standard and non-trivial approach to lighting rooms are LED tapes. You will not only pick up an unusual color of lighting, but even create a present light show, thanks to light-line effects - smoothly replacing colors, light music, waves, etc.
Modern trends in ceiling
- Light neutral tones make room spacious, lighter, above. If you decide to use patterns or bright colors - accentuate them in one small place so that the room does not become aleap.
- Excellent split space on zones allow multi-level ceilings. For example, the reciprocating ceiling site will perfectly concentrate on the bedroom bedroom.
- Glossy, mirror and lacquered surface dispels light, creating an effect of a 3-hot space.
- For a low room, a monophonic light drywall ceiling with LED ribbons located along the edges is ideal. Such an illusion visually raises the ceiling.
- The ceiling, wood-sheathed or lining under the wood, together with light furniture gives naturalness, wealth and comfort.
- The glossy wall covering the bathroom is perfectly combined with a matte ceiling.
The eternal question of repair is to make it yourself or provide work to professionals. In fact, many of the above methods of design of the ceiling are not particularly difficult and can be performed independently. You are easily overlooking or paint the ceiling yourself, wake it up with wallpaper or plates from polystyrene foam. With a certain skill and studying video materials, you will be able to plant a plasterboard plate or MDF panel.
The only appearance of the ceiling, the installation of which is recommended to charge specialists - stretch ceiling. First, because at least a small practice is needed for its installation. Secondly, because it is stretched by the canvas with the help of a special expensive gas gun, which you should not be purchased for one repair.
We offer several video tutorials on self-decorating ceilings, and you already decide how these ways are you to die.
To deal with how to give the ceiling a unique appearance and at the same time make it most reliable as possible, it is necessary to deal with what ways to finish the ceiling today.
The most commonly used ceiling finishes
For this, it is necessary to consider the materials used in this process in detail, their technical specifications and operational qualities in order to solve the question of whether to separate the ceiling in the room. If there are questions about the characteristics of certain samples, you can always seek help to professionals who are willing to provide photo and video materials on their installation.
Tensioning film type ceiling as one of the trim methods
Correcting on what the ceiling can be separated in the room, we can say that the use of the stretch ceiling will be an excellent solution. Their production is carried out using durable materials based on polymers represented by a polyvinyl chloride film (PVC). As a rule, high-quality tension ceilings include extremely environmentally friendly materials, and, speaking of their technical characteristics, it is important to note that they are an excellent soundproofer, as well as resistant to fire and moisture.
Among the advantages of the stretch ceiling there are also such as, for example, a rich selection of color shades, a variety of textures and reliefs, as well as a wide range of their applications. The guarantee provides for the service life of 10 years, but in fact, stretch ceilings can be served for about 25 years.
As already mentioned, only clean materials are included in high-quality stretch ceilings, so such systems can be mounted in children's rooms and in bedrooms.
Deciding, how to separate the ceiling in the room using a stretch design, should also not forget that when it is installed, a part of the height equal to about 20 centimeters will also be blown.
Ceiling trim using plasterboard stoves, cassettes and rail
Speaking about what modern ways to finish the ceiling are, it is necessary to mention and suspended structures that have acquired today not less popularity than stretching. This is due, first of all, with a wide range of their functionality. So, for example, a suspended ceiling is perfect if you need to hide some room communications, as well as eliminate visually noticeable defects or surface flaws. In general, the ceiling finishes can be very different, which allows you to choose a suitable option for yourself.
The basis of the production of rush and cassette suspended ceilings is steel or aluminum treated with zinc, and the material itself has quite high quality. These structures have earned their popularity also due to high aesthetic indicators, a wide selection of color shades, as well as the possibility of applying various images. The surface of the rivers and cassettes is completely mirror, which has a positive effect on the visual perception of the room, since its height is visually increasing. In addition, ceilings from cassettes and rails are well tolerated high temperatures and high humidity, so they can be mounted, for example, in the bathroom or in the pool.
Among the disadvantages of such suspended ceilings are a low degree of sound insulation, relative complexity in the operation of communications located in the interporal space, as well as a very high cost. Despite this, their advantages still outweigh the negative sides: such ceilings are easy to wash and dismantle, with their help you can also create multi-level systems without any problems and apply them to decorate the arches in the room, and their service life is very large.
Ceiling trim with lime, chalk or paint - economical option
Many owners in the process of choosing what the ceiling can be separated, stop your choice on traditional and economical. One of the most frequently used methods is the surfaces of the surface. It is only important to use this material in those rooms where there is no high humidity, that is, in corridors, utility rooms and other business rooms.
The basis of the whitewings is a solution with a snow-white color, which includes lime or chalk. This shade will be able to fit well in the interior of any nature. However, you should not forget that with overly bright lighting your color intensity is losing. In addition, this finishing material does not tolerate moisture effect and can be operated in rooms with elevated moisture levels.
As a replacement, the blames can be used for the ceilings.
As a rule, these compositions include:
- water paints;
- paints on a water-emulsion basis;
- silicone paints;
- latex formulations;
- silicate paints.
For example, silicone paint has elevated steam-resistant, which, accordingly, explains its high price. Typically, the ceilings are painted in places such as a kitchen, bathroom, garage and other economic premises. A wide range of colors will make it possible to issue an interior on their own design and give a particular room desired design.
Considering the methods of finishing the ceilings, it is impossible not to mention and such an option as pasting the ceiling surface with wallpaper. Moreover, you can perform this procedure not only with the help of paper samples, but also vinyl or phliseline wallpaper. The fastener in this case is glue, but you can cover only paper and vinyl material, and it is impossible to do this with fliesline wallpaper. Preferably, it is preferable to apply such a finish in those rooms where the level of humidity is high, and there is no possibility of applying other ways to finish.
So, it can be concluded that the ceiling finish is a process that can be performed independently, it is important only to clearly follow all the rules for their installation and comply with the necessary conditions characteristic of certain materials.
Repair did almost everything. And here there may be various difficulties and difficulties. For example, with a selection of material for finishing. How to separate the ceiling in the house, walls or floors? What's better? Such questions arise constantly. The article will be discussed about finishing the ceilings. What are the options?
We use paint and bliss
Painting and bleaching ceilings are a long-known way. The surface is aligned with various building mixtures. Then it is covered with water-free paint or whitewash.
This method has both its advantages and cons. The first is the low cost and simplicity (of course, if the surface is smooth). And from minuses is a lot of dirt. This applies to whitewash. You will have to cover something or take all the furniture from the room, close the floors and windows. Otherwise, everything will be covered by blots blots.
We use wallpaper
There is another inexpensive and fast way - this is the use of wallpaper. The roll of such a material can be bought inexpensively. In addition, today on sale you can find weighted specifically for stickers on the ceiling wallpaper.
You can use liquid wallpapers that look much more beautiful than usual. They are applied to the primed surface. The ceiling must be dry and deemed. Wallpapers are applied with a grater or spatula. If you apply with the help of a construction gun-pulverizer, you do not need to rub them.
The use of liquid wallpaper makes it possible to create drawings on the ceiling. This design will look original.
Use of suspended structures
Today, modern materials come to replace the usual wallpaper and whitewash. For example, suspended structures are found in many urban apartments.
The basis of such structures is the framework. It is attached directly to the rough ceiling. Then the panels are mounted on the frame. You can use a wide variety of materials. There will be a panel of plastic, wood or metal.
Wooden lining looks well and is an environmentally friendly material.
Wood is afraid of moisture, so it is better not to use it in the kitchen and in the bathroom.
Plastic panels can be placed in any room. They serve long and easy to maintain. In mounted ceilings, you can even meet the mirror panels. Such structures look respectable, but also costly.
Plasterboard sheets are most popular. Such a material is inexpensive, and it is easy to mount it. The ceiling of plasterboard can be served with the correct care for many decades.
Suspended structures have a number of advantages and disadvantages. To the first one can attribute:
- The ability to issue a multi-level ceiling. This kind of lately becomes very popular.
- In the interporal space you can hide various communications. All wiring and ventilation systems will not be in sight. In addition, it becomes possible to place the built-in lamps anywhere in the ceiling.
- It is facilitated by the repair of construction. If for any reason you have damaged one panel, it can be easily replaced. At the same time, the rest of the construction can not be touched.
The disadvantages include a decrease in free space in the room. The attached construction takes away from 7 to 12 cm height. Therefore, if there are low ceilings in the room, then it may be better to do with whitewash or pasting wallpaper.
Stretch ceiling
A wide variety of ceiling design options gives the use of stretch structures. You can easily pick up the color to your interior. The canvas can be of a wide variety. In addition, you can mount stretch ceilings with glossy, matte or mirror effect. It is also possible to place a picture or photo on the ceiling.
The forms of the design of stretch ceilings are also varied. You can make multi-level or tent, long or wave structures.
In addition, the canvas is not afraid of moisture and it is easy to maintain it. Such a ceiling can be mounted in any room. He fireproof. Stretch ceiling will protect your home from flooding. If the neighbors are plugged on top with water, then the canvas can delay up to 100 liters of fluid. Then it will only be necessary to drain the liquid and dry the design.
Installation is carried out in just a few hours (of course, if the masters work). On the perimeter of the room the baguettes are attached to which the canvas is tensioned (using the heat gun).
This design takes from the height of the ceiling is only 3 cm. In this case, you can place the wiring in the interpostic space.
If we talk about cost, it will depend on the choice of material. There is a web for sale both imported and domestic production. The second option is cheaper, but quality is not always at a high level.
Video
Master class on finishing the ceiling with liquid wallpaper:
Photo
The interior is based on all parts of the room without exception. From what will be the trim of the ceilings, the overall perception of the room and the atmosphere, which will reign there. It is known that the ceiling coatings should be harmonized with the selected style of color and forms. If the ceiling is luxurious and expensive, she immediately attracts attention.
Simplicity and laconicity allow you to transfer your view to other elements. Modern options for finishing the ceiling in the apartment are distinguished by a variety. The choice of the final version always depends on the style of your chosen, financial capabilities, taste and room area.
To make sure how rich and diverse types of ceiling coatings are enough to go to any construction store. Because of this, many consumers do not know what to see the ceiling. We will list only the main types of ceiling finishes:
- whitewashes and painting;
- casting surface with special wallpaper and plates;
- the use of rush structures, plastic panels;
- stretch version of the ceiling finishes;
- ceiling cover with plasterboard suspended structures;
- wooden ceiling liner.
Absolutely, without exception, the ceiling finishing methods are actively used in the repair process. Some are used for 100 years or more, other ways to finish the ceilings in the apartment are just beginning to be in use. It is extremely important to know the positive and negative methods of each method. After all, knowing than to rinse the ceiling, it is much easier to make the right choice and not just good - excellent repairs in the room.
Classic always in price
Perhaps the most first ceiling coating was created using classic finish methods. Two hundred years ago, people did not know what a cable ceiling was, but the whots and painting were used everywhere. In the category "Ceilings" Types of finish are different, and the owners of the apartments most often use these two ways. They are perfectly suitable for the ceiling, and at the same time require sufficient troublesome, difficult preparatory work.
The decoration of the ceiling in the house of lime is good because the material itself is a bit, and the design is 100% eco-friendly. Conduct the surface with lime relatively simple, as a result, the blots will turn out to be smooth, snow-white arch. It will suit absolutely any style, it just looks boring and ordinary. So there can be a speech about any individual decoration for rooms.
The average service life of the White - 2-3 years. Therefore, before you separate the ceiling in the house of lime, think about the feasibility of this method. It can not be washed, and pollution absorbed almost instantly. Before starting work, putty and primer are required. Repeated whitewas will require no less effort.
If you are interested in a beautiful ceiling finish from the options cheaper, it is the painting will help create a perfectly smooth and attractive coating. By the way, in some cases, such a "roof" above your head can be washed.
How to separate the ceiling is much better and more practical, you will tell you the sellers of paint. The painted surface is an excellent opportunity to choose any color and shade that will fit the decoration of the room. And if you are a creative person, to separate the ceiling in the room in the form of a man-made canvase. The creation of such a masterpiece although it prolongs the time of repair, but the work will be unique and unusual.
Flowing surface is a whole art.
What can be separated the ceiling, so it is special wallpaper. There are products of various colors and textures. They help hide any cracks and irregularities of the ceiling cover. And this material is relatively inexpensive and definitely will not hit your wallet. His relief structure makes great masks small defects.
The whole process sticker wallpaper can be described as uncomfortable and rather laborious. This is especially true of situations when you have to work alone. The advantage is that a specific tool and special skills will not need. In rooms with a high level of humidity, such as bathrooms, options for finishing the ceilings by conventional wallpaper are not suitable completely.
A separate topic for conversation - liquid wallpaper. Thanks to them, you can get a rich, unusual decor with an absolutely seamless surface. The material is very easy to use and at the same time superbly hides any defects.
Separate rooms can also be ceiling plates. Their characteristic feature is an unusual relief coverage, it is possible to choose a color and drawing. Elementary installation and available cost make ceiling plates popular. So if you think about to separate the ceiling in the apartment, pay attention to expanded polystyrene.
Original suspension facilities
To create a suspended suspended ceiling, first of all the foundation is set to which the finishing materials will be attached. The ceiling liner is good because in the frame cavity you can always hide the wires, pipes and other communications. An essential drawback is only one - all suspended structures significantly reduce the height of the room. That is why the liner is completely not suitable for low rooms.
The first "applicant" is plasterboard. When using it, stitched ceilings can be made with multi-level, fantastic appearance and texture. How to seize the ceiling with plasterboard? Everything is very simple. Sheets are easily cut, to give the desired form is easy. To arrange the surface with their own hands, sheets are attached to the frame, the seams are closed.
The result is a set, monolithic and smooth coating, separated in the best traditions. Such types of ceiling finishes allow you to create nontrivial forms and amazing solutions for any premises. How to rinse the ceiling and re-establish it with additional means? For these purposes, you can use paint, although all other options are also suitable.
How to cover the ceiling in the apartment, if traditional plasterboard does not suit you for one reason or any other reasons? Today you can check the ceiling by panels that are made of plastic, plaster, aluminum, have a mirror coating and so on. The trimmed surface of the ceiling with their own hands can be smooth and structured. It all depends on what exactly you decided to sew the surface.
When the room is too humid, how to correct the ceiling, becomes the initial task. What ceilings are suitable for such rooms? First of all, plastic panels and metal plates. These are the best materials when it comes to essential temperature drops. Products are quickly clean, do not change their appearance. Modern finish looks concise and juicy.
Gypsum finishing material is also resistant to moisture, gives back painting and decorating stucco.
All these advantages allow you to create unique design solutions. The only lack of plaster is a solid weight, which is why without reliable attachment you just do not do.
From stretch structures to laminate
The lined PVC film element looks modern and unique. Wet premises polyvinyl chloride is not afraid, pollution does not absorb. And you can wash it. Even if you have an idea how to seize the ceiling with such material, it is desirable to entrust work to those skilled in the art. It requires special equipment.
The cost of installing is not cheap, but if you are looking for, the better to separate the ceiling, all the above options are fused on the background of the tension type of finishing. He is durable, reliable and very refinement looks.
There are certain advantages from laminate, which has recently been customary to install not only on the floor. By purchasing the required amount of material, you can create an original overlap and do without unnecessary costs.
Tree over your head? Why not!
If a tree predominates in the interior of the room than to sew the ceiling, like not wooden slats? Since we have 100% natural material, it does not highlight harmful elements, breathing perfectly, has a long service life. Due to the solid weight, the wooden overlap needs the same strong and reliable framework.
The most important stage of repair is the choice of ceiling design. It is better to think over it in advance, picking up the material in accordance with the style of the interior. Quality will depend on the characteristics of the material and the correctness of the work performed.
Modern cosmetic repair of any room does not cost without ceiling, be it a simple urban apartment, an elite cottage or country house. But not every man has an idea of \u200b\u200bwhether to separate the ceiling in the room using simple materials, as well as the minimum of financial and physical costs.
Moreover, the ceiling does not have to be made in a classic style. - If you wish, you can even create a star sky card.
The main options for design ceiling:
- whitewash;
- coloring;
- pasting wallpaper;
- pasting ceiling plates;
- liquid wallpaper;
- suspended ceiling;
- stretch ceiling.
Each of these options has its own characteristics. So, not any ceiling can be suitable for coloring due to an uneven surface. In such cases, it is better to resort to the use of tension or suspended canvas, which will hide all the structural lack of builders.
Whitewash
- This method of finishing the ceiling used our grandmothersWhen equipped their homes. In modern homes and offices, in the corridors and in the hall, too, you can also often meet whitewashed ceilings, because the necessary finishing materials are quite inexpensive.
- but this option can be applied only for perfectly smooth surfaces.. Otherwise, the result may be the opposite desired.
- The main disadvantage of the use of blots as a finishing material is dirt. First, the seminal surface is not recommended to wet, which is a serious limitation to select this method of finishing the ceiling in rooms such as kitchen, bathroom, boiler room. Secondly, the whots leaves the mounted divorces on all surfaces where the solution is inserted.
To avoid long-term posturperary cleaning, the following blurry technology is recommended:
- Shipping floor cellophane film or newspapers.
- Remove the furniture from the room, and if it is impossible - close it with cellophane film or special covers.
- Cook whirl (chalk or lime).
- Turn the surface with brushes one or several times.
Tip! No matter how carefully was not carried out, it is inevitable to splashing it, so it is recommended to lay the floor, as well as use gloves and work clothes.
Color
This method of finishing is becoming increasingly popular. As with the option with a whitewash, in this case a perfectly smooth ceiling is required - almost any person can tell it with paint, which at least once made this procedure.
Painting technology:
- slip and polish ceiling;
- zagabluite the surface of the diluted water-level paint;
- swipe staining Surfaces 1-2 times.
The coloring of the ceiling, compared with other ways to finish, has several undeniable advantages:
- special paint is not afraid of water, so the painted ceilings can be boldly washed and even use special means;
- if desired you can easily change the color gamut room, just repainting the ceiling;
- this option is pretty cheap and affordable.
Ceiling pasting with wallpaper and slabs
Fucking wallpaper
When choosing a room design option, many still stop on the usual oboh. This material is the best than you can separate the ceiling in residential areas yourself.
Wallpaper is excellent even for pasting not too smooth and cracked surfaces. This procedure is inexpensive and does not require much costs for materials.
The disadvantage of this method of finishing the ceilings is large complexity. It is necessary to closely make sure that the air can not accumulate under the walls.
Especially acute this problem concerns rolls with a large width. In addition, the work on pasting is better to spend together - this should be considered before separating the ceiling itself.
Casting ceiling plates
As with the ceiling pasting with wallpaper, ceiling plates do not require perfectly smooth surface. They easily hide all minor flaws, including small cracks and not too embossed irregularities.
Caution! Ceiling tile has a soft texture. It should be glued very carefully, otherwise traces can remain in the prescript places, which will be impossible.
Before separating the ceiling in the room by placing it with special plates, you need to decide where the so-called source point will be. It is recommended to place it in the most viewed corner and from there to start the ceiling pasting.
The second option is to start glue the slabs from the center of the room, evenly trimmed them along the edges near the walls. The irregularity of the joints of the walls and the ceiling perfectly hide the ceiling plinths.
Liquid wallpaper
Liquid wallpaper or silk plaster - Excellent alternative to other ways to finish the ceiling. They are able to give the ceiling special features of royal luxury and amazing grace, turning it into a real work of art.
In order to finish the ceiling with liquid wallpaper:
- Clean the surface from dust and dirt thoroughly.
- Fully drain the ceiling.
- Straighten the surface.
- Apply silk plaster to the ceiling with a specially designed trowel.
However, the application of this type of plaster - very complex procedure and requires certain skills. Therefore, before separating the ceiling - it is better to consult a specialist.
Suspended ceiling
This option is very popular when designing urban apartments, residential buildings, as well as office premises. Suspended ceiling is a metal frameattached to the ceiling and lined with removable panels.
About how it is better to separate the ceiling by this method knows a lot. The main task is the choice of material.
For kitchens and small rooms it is better to use plastic panels. This material is easily clean and well interacts with cleaning substances, resistant to the constant impact of moisture and steam. It is often used for the design of bathrooms and bathrooms.
But in ordinary rooms you can apply panels from any materials. The most common is plasterboard.
It is easily cut and therefore perfectly suitable for the design of figure suspended ceilings, which is often practiced in large halls and living rooms. From the disadvantages of plasterboard plates you can highlight them bending instability.
The main "minus" of the suspended ceiling is that it significantly reduces the height of the ceilings. Therefore, for the design of low premises, this method is not suitable.
The advantages of suspended ceilings:
- the possibility of changing individual plates (in the case of leaks or the appearance of cracks in the stoves do not have to change the entire ceiling);
- the ability to hide any flaws of the ceiling, including deep cracks and the relief that cannot be eliminated;
- the ability to hide any ceiling communications (pipes, wiring, etc.).