Nowadays, a bath is one of the prerequisites for comfort, but even if you use it as carefully as possible, over time the question will arise of how to remove blockages in the bath.
The drain that connects the tub and the common riser through the pipe can be clogged for a variety of reasons.
One of the main things is considered to be getting into it of various debris, ranging from hair and wool and ending with all kinds of threads, rags, pieces of washcloth and the like.
All this eventually settles in the pipe, accumulates and, as a result, forms a plug, which is not always easy to get rid of.
In addition to the fact that the liquid stops leaving normally, an unpleasant odor may also appear, which is a consequence of the decomposition of debris stuck in the sink or bathroom.
Meanwhile, you can eliminate the blockage in the bathroom and sink on your own without the help of specialists.
In order to quickly clean a bath or sink, you should use one of the proven methods, which will be discussed below.
The main causes of blockages
First of all, you need to figure out what can lead to the formation of a blockage in the bath or sink.
One of the most difficult causes of blockages in a bathroom or sink is a design error.
The craftsmen could have placed them at the wrong angle at the stage of repair when laying sewer pipes, which influenced the formation of a plug.
In this case, of course, you can clean the bathtub or sink, but soon the problem will arise again.
In order to completely eliminate the cause of any blockage in the bathtub or sink, you will have to redo the problematic sewer pipe.
Also, quite often, foreign objects that, for various reasons, got into the drain, lead to the formation of a blockage in the bath. In this situation, you will have to use the mechanical method.
Another reason for the formation of an internal blockage in a bathroom or sink can be various contamination of the pipe system, or rather its inner surface.
The most optimal way to eliminate the problem in this case is to use special formulations.
Very often, blockages in the bathroom or sink are formed through the fault of the residents themselves, who neglect basic preventive measures and rules for caring for the sewer systems.
In any case, you will have to fight with the cork in the bathroom or sink by all available means.
Mechanical methods
The most common way to clear a blockage in a pipe is to use a plunger.
People have been using this simple device for many years, and if a blockage in the bathroom has formed directly near the drain, then a plunger will help to quickly remove it.
The video below shows how to clean the drain in the bathtub.
Before starting work, the rubber part of the plunger should be thoroughly lubricated with petroleum jelly so that it is hermetically docked with the drain.
In some cases, in order to clean the drain hole, this simple procedure will have to be repeated several times.
In severe cases, with serious contamination, you can try to clean the drain not with air, but with water.
To do this, you should take a certain amount of water into the bath, preferably hot, after which they begin to pump it into the pipe with a plunger, and then they pull it out sharply.
This is repeated several times until the moment when it is possible to completely clean the drain.
In the event that it was not possible to break through the blockage in the bathroom with a plunger, it is recommended to use a special cable.
As a rule, its use allows you to break through even the most severe blockages in the bathroom.
However, if the sewer pipes connecting the drain to the riser are made of thin plastic, then they can be damaged, and therefore the work should be done as carefully as possible.
To begin with, the end of the cable must be carefully straightened so that it can hook on the debris that is stuck in the system.
At that moment, when the main obstacle is removed, you should make several sharp jolts along the pipe and start up hot water. The cable itself, together with the resulting dirt, must be pulled back.
Other cleaning methods
To quickly and effectively clear the blockages in the bathtub, you can use special chemicals, which are offered in a huge assortment in specialized stores.
As a rule, a good remedy makes it possible to cope with the problem and clear the blockage in the sewer system in a matter of minutes without any effort.
Such a tool is especially effective in dealing with so-called operational blockages, which are of organic origin.
Below is a guide on how to clean your home drain and pipes.
Such formulations are available in various forms, ranging from powders and gels to liquids and special foams.
The most popular today include the Mole or Mister Muscle remedy, but you can find others in the store that help to effectively clean the pipe and get rid of the organic type of blockage.
To fix the problem, these funds should be used according to the instructions for use, which, as a rule, come with the composition.
You can also eliminate and completely remove the blockage in the bathroom using folk methods.
In most cases, only mild organic blockages can be removed with folk remedies.
One of the simplest is considered to be ordinary boiling water, which is able to dissolve almost any fat accumulated in the sewer system, but it is not suitable for dealing with more serious blockages.
Deeper blockages can be dealt with with vinegar and baking soda. To do this, you need to pour a glass of soda into the drain, and then pour it with a glass of vinegar.
The material below describes how to clean pipes at home.
As a result, a violent chemical reaction will take place inside the pipe with abundant foam formation, which will allow the pipe itself to be cleaned. In order for the foam to go inside the pipe directly to the blockage, it is recommended to close the drain with a plug.
After about twenty minutes, the sewer system should be thoroughly flushed with hot water. Sometimes they fight blockages in the bathroom with ordinary lemons.
To do this, squeeze the juice from the fruit directly into the drain hole itself and leave it for several hours, after which it is rinsed abundantly with water.
If a decision is made to clear the resulting blockage with a cable, then it can be quite simple to make with your own hands.
To do this, take a high-quality flexible wire and bend one of its ends slightly to a rounded shape.
In turn, the other end of the wire is tightly wrapped with a piece of cloth, resulting in something like a pen.
When using cables, remember that they can damage the plastic or chrome-plated surface.
It is also very carefully necessary to use various chemical compositions.
For the most part, such agents aggressively affect the surface and can lead to deformation and failure of the inner part of the pipe.
To prevent the formation of blockages in the sewer systems, it is recommended to regularly carry out preventive measures.
So, it is advisable to install a metal mesh on the drain, which will collect all the main debris from the bath.
In addition, from time to time, you should use all kinds of special compounds that prevent the formation of blockages in the bathroom.