We remove the blockage in the bathroom on our own

You can remove the blockage in the sewer pipe yourself. It is not necessary to call a plumber.

You can save a lot by cleaning the pipe with home remedies or household chemicals.

Causes

A dirty bathroom drain can lead to serious plumbing problems. If the drain is clogged, all the dirt flows back into the container, it will not be very pleasant to take water procedures when mold with hair and soapy water will crawl out of the drain hole.

Signs of a blockage in the bathroom:

1. Water drains off more slowly than usual.
2. The dirt flows back into the container.
3. Puddles of water around appliances with drains.

Before cleaning, you need to find out the reason why the drain in the bathroom is clogged.

The most common reasons why pipes are clogged are:

1. Hair and dead skin cells stick to the walls and, if not cleaned, begin to accumulate.
2. Clogging occurs due to the frequent washing of things in the bathroom, the constant use of water procedures. The water itself flows down the drain, and the soap settles on the walls.
3. A clogged pipe must be cleaned once a month. Prolonged lack of proper care leads to the appearance of build-ups, limescale. The pipes begin to loosen and a leak appears.
4. The sewage system quickly clogs up if its installation was incorrectly carried out during the repair. Due to the low incline, dirt accumulates faster.
5. Do not make many bends when installing the pipeline. They also collect more hair, grease, sand and other debris.
6. The sewer pipe should not be narrow. Otherwise, you will have to clean it very often, because it clogs up faster.

Having found out the cause of the clogged sewage system, you can start cleaning it.If you are not sure that you will cope with the task at hand, then you cannot do without the intervention of a specialist.

Mechanical methods

Mechanical methods can be used to clean the sewer system. These include a plunger, rope or vacuum cleaner.

With the help of such methods, it will be possible to quickly remove the blockage.

Ventuz

They perfectly pierce clogged pipes with a plunger. It consists of a long, straight handle with a flexible rubber cup mechanism mounted at the bottom.

This rubber piece acts like a suction cup, pulling out any debris. At home, this is the simplest method that perfectly cleans any drain holes.

How to unclog a blockage in a bathroom:

1. The best result will be achieved by plugging the hole above the drain, which is intended for overflowing water.
2. Do not use chemicals while using a plunger. During the procedure, hazardous substances can get on clothes or skin, leave burns.
3. The base of the plunger must be covered with water.
4. Place this item over the drain hole. The rubber cup must cover it completely. The handle should be upright. Tilting it slightly will reduce the pulling force of the dirt.
5. Press down on the plunger so that it sucks well. Then move the handle up and down for 15–20 seconds.
6. Then you need to pull out the plunger and look at the result. If the water drains well, you can stop the procedure, if it's bad, repeat it.

After clearing the drain from the blockage, turn on hot water to rinse the remaining dirt. Gradually increase the pressure so that no trace remains of the blockage.

At home, they clean the sewer systems using a plumbing cable. If the plunger does not help, you can use this device.

Plumbing rope is a flexible metal rope that is made with a diameter of 6 mm and up to 5 m in length.

You can also make it yourself. For example, take a wire hanger and straighten it, and at the end they make a small hook, with which it will be more convenient to pull out the hair.

How to remove a blockage in the bathroom:

1. The wire is carefully inserted into the drain hole so as not to damage the siphon. Simultaneously with the introduction, it is necessary to rotate the cable.
2. When the cable is inserted to the maximum possible depth, turn it 2-3 times and pull it out.
3. Hair and other waste will cling to the hook. You can repeat the procedure until all contamination is removed.

After that, hot water is turned on to cleanse the sewer system.

Vacuum cleaner

You can also clean the siphon and remove the blockage from the pipes. The household appliance is convenient to use.

How to remove the blockage:

1. The rubber nozzle from the plunger is installed on the pipe of the vacuum cleaner and properly secured with electrical tape. Don't worry, the glue can be cleaned with rubbing alcohol.
2. Remove the garbage bag from the household appliance and connect a hose with a pipe to the blow hole.
3. It remains to turn on the device and start cleaning the drain hole.

This is the easiest method for cleaning a siphon at home.

There are a number of commercial products specifically designed for drain cleaning.

When using household chemicals, be sure to protect your hands with rubber gloves, wear a respirator and goggles.

To remove the blockage, you can use the following tools:

1. Domestos- an irreplaceable assistant in cleaning the bathroom. Cleaning with it does not take much time. Domestos can cope with this problem no worse than specialized alkaline products. How to use it: pour 7-10 caps of the product into the drain hole and leave it overnight. It is important that no one uses the bathroom at night, so you should warn all household members. In the morning, rinse the pipe with plenty of hot water.
2. Mole sold in liquid form. The entire procedure takes approximately 90 minutes. The liquid is poured into the drain hole, kept for the prescribed time (indicated in the instructions). Then the systems are flushed with hot water, simply by opening the tap. If the product accidentally gets on the skin, rinse immediately with clean water and contact the nearest burn department.
3. Tyreth- an excellent tool if you need to clean the sewer pipes and siphon at home. The liquid is a gel, unfortunately, it is not used economically. One bottle is enough for only 2 cleanings. Tiret is poured into the drain hole, and left to act for 5 minutes, if the blockage is strong, you can stand it for 30 minutes. The remaining cleaning agent is washed off with running water. Tiret should not be mixed with acids, as the reaction can cause severe burns to the respiratory tract.
4. Mister Muscle can be used for cleaning all types of drain pipes. The substance is granular, but it can also negatively affect the condition of the skin, so do not forget to wear rubber gloves. Mister muscle is poured into the drain hole and left for half an hour. During this time, the chemical will have time to eliminate not only the blockage, but also kill pathogenic microorganisms, remove the stench. Then rinse the drain hole with hot water.
5. Sky another noteworthy remedy for. It destroys germs, dissolves soap deposits, hair and even threads. The product is on sale in sachets. The contents of one sachet are poured into the sewer hole, which must be unclogged, and wait 15 minutes. Then the residues are washed off with running water. Be careful when removing residual agent around the drain hole.

Household chemicals will solve the problem well and quickly. But if you are an asthmatic and a respirator does not help, it is better to use folk methods of removing a clogged pipe.

Folk remedies

In the life of every person, sooner or later there comes a moment when there is a problem with how to clean the siphon in the sink and remove the blockage in the bathroom.

If the house does not have a plumbing cable or plunger, you can use folk remedies.

There are many ways you can use baking soda. But for its application it is necessary that there is no water in the bathroom.

Correct elimination of the problem:

1. Bring rubber gloves and goggles to protect your eyes. Caustic soda can cause chemical burns and has fantastic degreasing properties. It is easy to deal with a clogged drain if there is such a remedy in the house. Take a bucket and pour 2 liters of water into it, add 3 cups of caustic soda. Mix the solution well with an old wooden spoon. When the liquid starts to sizzle, pour it into a clogged siphon. Let the solution work for 20-30 minutes, then turn on the hot water. The procedure can be repeated if it was not possible to clean the clogged drain the first time.
2. Mix ½ cup table salt with ½ cup baking soda, add water and pour into a pipe. Let it sit for 10-20 minutes, then pour in boiling water. Salt, baking soda, and boiling water will create a chemical reaction that should dissolve the plaque.
3. Baking soda and vinegar are natural alternatives to chemicals. This method is environmentally friendly and will not damage plastic pipes. Pour boiling water down the drain. Then add ½ cup of baking soda and push it inside. Leave the drain alone for 5 minutes. Next, pour in 1 cup vinegar and 1 cup boiling liquid. The baking soda and vinegar will fizzle, this chemical reaction will help clear the pipe. After 10–20 minutes, pour a kettle of hot water down the drain to flush out any dirt weakened by this product.

Baking soda, vinegar, and salt are cheap remedies that can be found in the grocery section. These cleaning agents quickly remove dirt from the pipes and flush out the siphon.

Boiling water

This method can be applied regularly, even every day. But if the pipe becomes heavily clogged, the boiling liquid may not help.

Boil more water and pour slowly down the drain 2-3 times, letting the hot water work for a few seconds. This is the fastest way to clean out the drain if the bathtub is clogged.

Dish detergent

Dishwashing detergent is capable of breaking down grease stains. It can be used if you need to clean the siphon or.

What to do to break through the drain - the algorithm of actions:

1. First, boiling water is poured into the sewer.
2. Then add ¼ cup of dish detergent.
3. Wait 15–20 minutes and refill the boiling water.
4. After half an hour, you can turn on a large pressure of hot water and rinse thoroughly.

Dish detergent can be used in conjunction with a plunger. This makes cleaning even better.

Sulphuric acid

Sulfuric acid is a good chemical commonly used to unclog a bathroom pipe if it gets heavily clogged.

Sulfuric acid is a harsh chemical and can be used, but plumbers do not recommend it. They argue that it will not work to get rid of the blockage with its help, in addition, its use will lead to the destruction of the sewage system.

Better to buy household chemicals that can be found on the counter of any hardware store.

This method of cleaning sewer systems is very effective. Washing is fast and efficient.

The main advantage of the hydrodynamic method is that it does not damage the pipeline; on the contrary, its service life is extended, since the method is gentle.

This method is also environmentally friendly and destroys deposits of any kind.

Hydrodynamic cleaning is carried out only by plumbers, since it requires special equipment to use it.

The technique involves the release of a jet of water under pressure, its temperature can reach 120 degrees.

It is recommended to carry out flushing by hydrodynamic method 1-2 times a year. Thanks to this cleaning method, the sewer system will operate smoothly throughout the year.

Prophylaxis

The likelihood of blockages is higher if the sewer pipes are already old. In order to clean the drain holes as little as possible, you must first replace the entire system.

Remove dirt from the outside whenever possible. After each shampooing, it is necessary to put on rubber gloves and remove them from the drain hole.

It is also necessary to use a plunger at least 2 times a week, as well as after each shampooing. This will remove all hair from the drain hole.

Such simple measures will prevent dirt from quickly accumulating on the inner surface of the pipes.

Cleaning the sewer system can be done not every week, but once a month. If the drain becomes clogged faster, then cleaning should be done more often.