Undoubtedly door locks are able to reliably protect the room from penetration, since the device of their mechanism is quite complex. However, if necessary and possession of some tools, they can still be opened. This is a significant advantage in cases where the key to the lock was lost, and it is necessary to get into the room.
This type of lock, as a hinged one, is most often used for a door leading to utility rooms, warehouses, garages. In most cases, there is no need to regularly open such rooms, so the key can easily get lost among other things.
What tools at hand will help open the lock?
Often in a TV series or film, you can see how professionals pick locks using the simplest means at hand, for example, invisibility, paper clips or wire. In fact, it is - a paper clip is a very effective tool for opening a padlock.
If you need to pick the lock, you will need two paper clips. They are bent with the letter G, and one of them is inserted into the lock. Try to set the mechanism in motion by rotating the paper clip. Perform all movements slowly, it is important to feel the mechanism itself in order to open it easier and faster.
After a while, you can feel how the lock is hooked. Now you need a second paper clip, which is inserted into the hole at the top of the lock. The next step is very important: it is necessary to feel the pins and lift them one by one. This must be done carefully and carefully. When all the pins are up, all that remains is to turn the first paperclip to achieve the final result. The padlock is now open.
How to deal with complex mechanisms?
As mentioned earlier, opening a padlock can be tricky. It is being manufactured different types, respectively, classified by size, quality, cost and, despite the fact that all these products are of the type of a padlock, they have colossal differences.
For example, a very common type of mechanism is a spring lock. Accordingly, if it becomes necessary to open the room, it is necessary to exert influence on the internal spring. In most cases, a spring lock is used as additional protection or they hang it on the doors of barns, outbuildings, close certain luggage with it.
It is also necessary to act on the spring using special tools... In a practical way, try to independently choose such a product that will perfectly fit the size of the lock, and act on the spring with it. Both a pin and a nail can act as such a product.
Hacking the cylinder mechanism
The cylinder mechanism has its own characteristics and several ways of breaking. The next method is the most effective and common.
- You will need a screwdriver, with which the self-tapping screw is screwed directly into the lock cylinder.
- The destroyed mechanism is leveled with a nail cutter.
Thus, the secret mechanism is destroyed and the lock is broken.
How to pick a lock while keeping it intact?
In order not to acquire a new lock after opening the room, you can try one proven method that will keep it intact. To do this, you need an ordinary tin can: the lid and bottom are cut off, and the cylindrical part itself is cut in half.
From one such half, it is necessary to cut out a shape like the letter T. Note that the leg of the letter must be long enough so that it can easily bend around the bow of the lock itself. Next, you need to fold the cut out figure in a semicircle, and insert its end between the lock body and its bow. The whole structure turns in a circle, making a full turn. Now the lock can be broken, just pull the shackle and it will open.
How can you pick a padlock using other methods?
Of course, there are other ways to hack, they do not require painstaking work. For example, you can open the lock with a grinder. It works especially effectively on Chinese locks, since their steel is usually less durable. It won't take much time to cut the shackle, just make some effort, and sometimes it turns out to cut the shackle even with a hacksaw.
Since not every person may have a grinder, there are other tools, for example, a crowbar. You can also use it to break the lock, but you can't do without strong male hands. The crowbar is installed in such a position that it is located between the lock body and the bow. This method does not always work, but in most cases it turns out to make the bow pop out of all the grooves. Efforts are applied by directing the end of the crowbar down and the opposite side up.
Due to the fact that many locks are amenable to burglary, it is necessary to purchase the highest quality and most reliable mechanisms. It is also recommended to store the keys in a certain place or to make a duplicate of them, so that in the event of the loss of one copy, you do not have to break or change the lock.
Today, the old padlock is often found in a garage, pantry, attic or warehouse. The main advantage and reason for the prevalence of the padlock is its low cost, simplicity of design and, at the same time, reliability.
Opening the door with such a lock, if the key is lost, it is simply impossible. the lock bar is made of steel, and garage, warehouse doors are usually metal.
Also, often the reason for the inability to open the door is wear protective mechanism... Over time, due to regular use, its inner secret may simply wear off. If the lock is hanging outdoors, due to the impact external factors(moisture, frost), the formation of foci of corrosion is simply inevitable. In this case, if there is no desire to use a grinder and damage the canvas, anyone will think about how to open the suspension lock.
This is actually enough typical problem... To solve it, many different ways... Many people use an aluminum can lock pick. By using empty can from under Coca-Cola you can easily make a kind of shamrock. The mechanism itself is hacked with the middle tongue.
Opening with a paper clip is the most effective and long-established method of working with a jammed padlock. The specificity is to get a bent paper clip, wire into a special lock, which must unclench and release the clip from the base. In some samples, instead of a latch, a button is provided, the principle of operation is not very different. The wire bent by the letter G must be inserted into the hole and slowly and gently turned.
It is important to remember that during rotation, you should pay attention to which direction the mechanism turns most easily.
Next, a second single-type master key is used and inserted into the upper region of the keyhole in order to find special pins, which, after detection, gradually rise. After all the pins are open, the lower pick is turned again.
In most cases, open it yourself padlock you can use an ordinary pin, knife or special lock picks that can be found at the craftsmen or locksmiths. You can learn more about how to open a semicircular padlock without a key in the corresponding video. Often it is important to assemble the required combination of the lock, which is presented in the form of a set of ordinary horizontal plates, using a pick in the shape of a "poker".
It should be noted that some models of padlocks with a semicircular key are quite resistant to burglary, therefore, its owners often turn to specialized services.
In this case, there are several ways. The first and most common requires the selection of a combination. First you need to pull the lock bar until it starts to press on the wheels. After that, rotational movements should be made until the moment a click occurs and the lock opens.
The second way is more complicated. Opening requires an aluminum plate that can be cut from tin can... This kind of key is rounded in diameter corresponding to the width of the bow. The plate is inserted into the hole between the body and the bow. At the very end, after the performed procedures, it is necessary to apply some effort to finally unlock.
How to Open a Padlock
A characteristic feature of such a mechanism is the presence of not pins, as in other models, but several discs with specific holes, which significantly complicate the entry into the room. In order for the discs to fit in the correct position, it is important to choose a key with the correct grooves.
Padlock disc lock Given the specificity of the design, with minimal loss of time, the disc padlock can be opened without a key only with a correctly selected master key or a bent flat screwdriver, which must be driven into the lock and turned with force.
How to open a barn lock without a key
It is important to remember that barn castle those samples are called that have a standard round bow. Therefore, old-style garage locks often fall into this category.
Castle medium and small size installed on wooden door, can also be opened by force. For this purpose, ordinary scrap is suitable. It is necessary to push the tool through the bow and, using the lever method, rip it off.
It will be more difficult to open the rack lock in the way described above, so here it is worth using a fishing line or string from a guitar. To begin with, you need to squeeze the door with a crowbar, then a loop is made from the string, which must be pushed into the well, circled around the pins and pulled towards you. For clarity, below is a video.
How to open the Apecs lock without a key
For those who wondered how to open a padlock from such a manufacturer, any specialist will answer that the methods practically do not differ from those given above.
It should also be noted that the products of the Apex company are designed for mass use and their price does not exceed the average. Therefore, hacking this mechanism will not take much time and effort.
How to open a Chinese padlock without a key
Samples made of Chinese steel are generally not resistant to force. The steel of the overhead locks is quite soft, so if you have a grinder, the opening process will not take much time and effort.
When exposed to a crowbar, you will need to apply force, but here it is still important to choose the right angle.
A padlock is a rather complex mechanism, which is why it is so often chosen for both primary and additional door protection. And to open this type of lock without the appropriate key is not easy enough.
Surely, everyone at least once in his life faced with theft or loss of the keys to the door. In such a situation, wasting time looking for a key is already useless, because it can be absolutely anywhere.
But think over the ways with which you can solve this task without the help of a key, it's still worth it. For you can stand under the door endlessly, especially if you were the owner of a single copy of the keys to the lock.
When does it become necessary to open a lock without a key?
The need to open a lock without a key can arise in other situations as well. Keyholes tend to fail over time.
This is completely normal, especially if the castle was not protected from precipitation and other external factors. Therefore, the door lock can simply jam at any time. Such a nuisance may not happen entirely by accident, but through the fault of ill-wishers. In our time, deliberate damage to locks by hooligans is not a rarity.
Another common case is a key break while opening a door. In such a situation, part of the key may remain in the lock altogether. For not only locks tend to deteriorate, but keys can also fail.
It is clear that there are different cases when any person can literally be under the door. Here we are not talking about breaking other people's locks. No one is immune from falling into similar situations... Unfortunately, not everyone knows how to open a padlock without a key.
How to open the lock yourself?
You can also unlock the padlock on the door yourself. To do this, you need to understand a little about the mechanism of the lock and have a little sleight of hand. Nowadays, there are many ways to open locks without the use of keys. Some of them are very complex and only professional experimenters can do, and some are quite simple and perfect for a woman or a child.
The most common way is to open the lock with a paperclip, invisibility, or a piece of wire. To do this, you will need to unbend a paper clip or other product that looks like it. There is a latch in the lock device, which can be unclenched with a piece of wire if the wire is bent correctly and hit successfully.
Some can do this trick in a couple of minutes, while others need to fiddle with the lock for about an hour. In any case, the result is worth it.
There are locks, the principle of which is a special button. The key, falling into such a lock, touches the button, pressing it, and the opening process takes place. In principle, there is nothing difficult here. Everything is quite simple and straightforward. Therefore, with the help of the material at hand, you can turn the same thing. That is, a thin object, it can be a hair clip or a rod from ballpoint pen, it is enough to pick the lock to find the very button in the mechanism.
How to open the most popular padlocks?
Padlocks come in many different varieties. AND price categories they are also different. But the most affordable and popular nowadays is considered to be a classic padlock, which works from a spring. Many are familiar with such a product and have met it quite often.
A spring-loaded padlock is often used to close a garage, warehouse, barn, and other non-residential premises. This type of protection is actively used in suitcases. This is very convenient if you go on a long trip and regularly check in your luggage. Such protection is also regularly installed on the door of a residential apartment or house as an additional security, and sometimes in the role of the main lock.
If you think logically, it becomes clear that opening such a padlock without a key is possible if you experiment with a spring. To do this, you will be helped by the same paper clip or piece of wire that can save any lock by opening it. You can also use a nail or other object that you think is suitable for the task. Your goal is to hit the spring.
Special devices for opening locks
For those who want to hedge themselves and protect themselves in advance in such a situation, there are many products and master keys for breaking locks, which can be ordered or bought ready-made from special craftsmen. Lockpicks allow you to easily and quickly open almost any lock without a key.
For those who believe that they are not able to cope with such a problem on their own, there is also excellent solution... You can always turn to a specialist in keyless opening of padlocks. The craftsman will deftly open the lock and will not leave any damage on it.
Anyone can stay under the door, since the lock can fly at any time, but if you have information about opening locks without keys, then you can always solve this problem.
How to open the door if there is no key- Immediately we will make a small remark that this article is primarily intended for those who want to open the door quickly, note that in most cases, upon opening, the lock will be damaged and mechanical damage is possible door leaf.
What you need to pick and pick the lock
When opening different locks, we need tools at hand, each lock needs its own tools, but usually this list is very similar for most cases.
The usual weapon of bugbears is a bunch of keys, so you need to arm yourself with them initially, although it is not always easy to find a bunch of keys, but if it is still at hand, try to find a similar key. Since all locks are installed in inexpensive doors, are very similar in shape, and sometimes they are exactly the same as yours.
Lock opening tools
- A bunch of similar keys
- Phillips and flat head screwdrivers
- Pliers
- Saw for metal
- Universal key for intercoms
To open the lock, you need a complete list of locksmith tools such as screwdrivers, pliers, metal saws and scrap. You need to know that all locks are made in such a way that they can be opened with improvised locksmith tools. After such an intervention, you will most likely need to replace the lock.
We tried to consider the most common types of locks with a low class of reliability and without additional secret mechanisms.
Types of locks:
- Cross-shaped lock;
- The padlock;
- French castle;
Before starting the autopsy, always try to find a key similar to yours first.
Cruciform lock
Phillips locks can be opened using a regular Phillips screwdriver of the same size as the key. To open such a lock, sometimes it is enough just to insert it into the hole with a little effort and turn it clockwise with strong rotary pressure. Usually for cheap types of locks with a low protection class, this is enough.
It may be necessary to replace the lock cylinder after opening.
The padlock
This type of locks is often used in garages, basements or any other utility rooms as well as for temporary fastening of bicycles, etc.
Such a lock is easier to break than to pick. An ordinary scrap is suitable for opening. Direct all the pressure into weak side, i.e. where the leg is attached to the lock body. If you did not have enough strength to pick the lock with a crowbar, then use ordinary saw for metal, the approximate time for sawing a diameter of 2 cm is approximately 10 minutes.
French castle
A French lock is quite difficult to open unnoticed, by an unprepared person. However, it can be opened using the forceful old-fashioned method. To do this, insert the flat end of the crowbar into the hole next to the lock. After that, you need to push the crowbar to the limit and begin to deform the door leaf by pressing on the crowbar, you need to press until the lock latch disconnects and stops clinging to the opening. As a result of such an operation, it is necessary complete replacement castle, and sometimes the door in general. If you need to open the door, but at the same time leave the lock and the door intact, then we recommend that you contact a specialist who is able to open the door without damage.
As in other cases, we first try to pick up the key to the lock. Often, if the lock is old and its well is worn out, then the probability of opening it with another key is about 70%. If we can't find the key, we try to open it with a screwdriver and pliers.
The first step is to remove the decorative strip that is around the lock, then hook with pliers on the protruding side of the lock cylinder and swing it until it falls out. If part of the cylinder remains inside, simply knock it out. Then take a flat screwdriver and insert it with a little force into the inside of the hole, if it will not go through, just knock it into the inside of the lock with pliers. Then, with a little effort, turn towards the opening.
There is a second method of opening such locks, but for this it is necessary to drill a larva to the full length of the key, just below the lock hole, with a drill diameter of 4-5 mm. After the lock has been drilled, you need to insert a flat screwdriver into the key hole and turn, the door should open.
If you do not want to damage the lock, you can purchase special sets of master keys and use them to try to open the lock.
Oopen door with intercom
Many people do not know that the key for the intercom can be ordered in ordinary workshops, where ordinary keys are made. Take the key from your neighbors and order a duplicate at any workshop (approximate cost 100-200 rubles) There are many offers on the Internet for the sale of universal keys that are suitable for any type.
If the situation has developed so that it is not possible to open the lock, then you can impudently knock the door down. Before that, warn the people outside the door that you are going to knock it out. Accentuate the kick next to the lock and hit with the heel. The blow should be sharp and directed. Sometimes it is easier and faster to knock a door open if it opens inward. The other leg should be fixed, and the foot should be directed parallel to the door.
Our recommendations for opening doors and opening locks are intended primarily for familiarization, and not for instructions for action, we advise you to contact specialized workshops for opening doors in Rostov-on-Don, there is such a workshop as Don-Service, we have highly qualified specialists work who will open the door with a lock of any complexity.
Knowing how to open between room door without a key can be useful to everyone. Slamming door situations can occur spontaneously and precisely when you least expect it. That is why you need to know how to deal with this problem in the shortest possible time.
A slammed door is a fairly common situation.
Possible situations
Locking systems on doors in a house can be completely different. Sometimes a simple handle with a tongue is enough, and in some cases you have to install additional latches and turnkey locks. However, there are situations when the door closes and opens it. in a simple way fails.
The reasons may be:
- a draft that slammed the lock;
- broken handle;
- falling tongue;
- push-button mechanism;
- loss of a key;
- intentional or accidental closing from the inside.
What to do in such cases? You can solve the problem different methods, depending on the specific situation. The most common ways are:
- the use of an improvised master key;
- disassembly of the lock or handle;
- removal from the hinges;
- the use of brute force.
Varieties of opening methods interior door
If you stayed in the room Small child, water is turned on or any technique that can provoke fires, you need to act immediately.
In emergency situations, most often there is nothing else to do but to hack into the interior door. Damage in this case cannot be avoided, but you will be able to minimize the risk of much more serious consequences.
Remove from hinges
The most common solution to the problem closed door, which first comes to mind is, of course, removing the canvas from the hinges. Since it is not always possible to open a room door without using a key by using lock picks, this method is the best alternative.
Conventional card loops have two parts. If there is sufficient clearance between the door and the frame, you can try to remove them from the awnings. Sometimes it is possible to unwind the details.
The disadvantage of this method is that it is not always possible to perform such an operation. This is especially difficult and practically impossible if hidden mechanisms are used.
Removing the door leaf from the hinges is only possible if there are sufficient gaps
Latch
A very popular fixture on doors leading to a bedroom, toilet or bathroom is the latch. Modern models equipped with rotary miniature handles, which are located on the side of the room. On the reverse side, a part of the lock is represented by a plug. Sometimes a turnkey lock is equipped instead of it, if it comes about the living room.
Since sometimes you need to open interior lock on a keyless door, you have to look for alternative ways to turn the latch tongue. The easiest way is to use a thin flat object, it can be a screwdriver, a plastic card, a nail file or a knife, sometimes you can open the lock with your fingernail. This is possible if a slotted or recessed plug is located on the reverse side. Pliers can be used for smooth push-button plugs. You just need to turn it and the lock will open.
Sometimes it is possible to move the tongue with the help of all the same devices, but at the same time it is necessary to penetrate the gap between the canvas and door frame... If the tension is not strong, it will not be difficult to move the latch.
The slammed latch to the door can be opened with a thin object by pushing the tab
Another option is the heck. It is installed over the door. How to open such a mechanism? You can try to move it through the gap between the door and the loot. If that doesn't work, then the easiest way is to use force. Usually, self-tapping screws easily fly out of the canvas, however, they can damage its surface.
Key lock
In some cases, additional locks with a larva are installed on the door, they can be cylinder, lever, disk, etc. A special key with notches is selected for each of these mechanisms, which activates the locking system and moves the bolt. But how to open the door to a room without a key or in the event of a lock break?
Several options are available here:
- Try jerking the door first. If the mechanism is simple, the deadbolt may rebound on its own.
- Pick up a similar key. Some secrets work not only from the native key.
- If all else fails, use the pick. You can try to move the tab in the gap between the door and the frame, or by interfering with the larva itself. It is necessary to move the levers or pins, depending on the type of lock.
- If this fails or the lock is broken, try to remove it. The cylinder can be bored out or removed in another way. For a regular pen, it will be enough to disassemble it and slide the tongue from the inside.
How best to open the interior door lock needs to be decided locally. It's worth starting with the least crude methods.
With the help of a master key, it is possible to open the lock doorknob on the key
Brute force
If you cannot open the door, but you have no other choice, then you can resort to extreme measures and use brute force. Different approaches are also possible here:
- Cut the hinges... Open fasteners are sawn off along the hinge axis or plate and the blade easily falls out of the opening.
- Cut off the tongue... If the latch or bolt is clearly visible in the gap between the box and the blade, and you can put a hacksaw or grinder's disc inside, try cutting it off. Get ready for metal sparks.
- Knock out the door... If there are no suitable tools at hand, and the door is very flimsy, you can easily knock it out of the opening.
It is worth knocking out a slammed door only as a last resort.
Apply similar methods follows only when other methods have failed. Most likely, after a break-in, you will have to change the door or at least restore the canvas and the box. You will also need to replace the fittings.
It is quite possible to open the door without using a key, but not all methods remain unnoticed. In order to prevent such a need, regularly check the serviceability of the locks and install such mechanisms that do not slam spontaneously.