The technology of wallpapering corners is complex only at first glance. Wallpapering walls will help create a cozy kitchen. homely atmosphere. Thanks to modern developments this finishing material, and in particular non-woven wallpaper, can compete with plastic in strength and durability. At the same time, they are more environmentally friendly, allow air to circulate and are easier to work with. The only thing you will have to tinker with is to figure out how to glue the wallpaper in the corners.
Choosing suitable wallpaper for the kitchen
Correctly selected wallpaper is already half the success. By saving on quality, you can greatly lose in durability, and in a year or two you will have to do repairs again.
Non-woven wallpaper is one of the best options for kitchen
Non-woven bases are more convenient when it becomes necessary to change the wallpaper. To do this, you just need to remove the vinyl layer, and the new canvas can be glued to the old finish.
Let's look at what types of wallpaper there are, and whether they can be used to cover the kitchen:
- Paper wallpaper- not a suitable option for the kitchen. In conditions of temperature changes, high humidity or dryness, the paper deteriorates and the design fades. Having decorated the kitchen with paper wallpaper, in such a microclimate one cannot count on its long service life.
- Vinyl on paper based – more durable material. They can be washed and glued for painting. Such wallpapers do not fade in the sun and are resistant to moisture. The gluing technology is the same as for paper ones. But since vinyl makes the canvas heavier, glue is chosen for heavy wallpaper. You should also keep in mind that not all vinyl flooring is breathable.
- Vinyl on non-woven base– are highly durable thanks to non-woven fabric as a lining. There is no need to be afraid that they will tear or shrink. This type of wallpaper is glued end to end. Due to the fact that the glue is applied only to the wall, energy and time are saved during the repair process.
- Non-woven wallpaper– thanks to their dense structure, they perfectly mask unevenness and cracks. They allow air to pass through well, without turning the kitchen into a “greenhouse”. Perfectly suitable as a base for painting. During the gluing process they do not stretch or tear. Easy to care for, they can be washed and vacuumed.
Required materials and tools
To properly hang wallpaper and not be caught off guard by the lack of necessary tools, before repairing, check that you have everything you need.
You will need:
- wallpaper,
- glue,
- assembly knife,
- scissors,
- putty knife,
- plaster,
- building level,
- plumb line,
- sponge,
- rubber roller,
- ruler,
- pencil,
- brush.
A pencil is a necessary auxiliary tool for gluing wallpaper in corners.
Subtleties of wallpapering corners
Wallpapering is a simple matter, but it also has its own subtleties. As a rule, difficulties arise if you do not know how to glue wallpaper in the corners. When at least one corner turns out to be crooked, as it is glued along the wall, an increasing distortion of the canvas will be observed relative to the surface of the floor and kitchen windows or ceiling.
You should not rely on the doorway as the starting point for wallpapering the walls. Check with a plumb line that it is truly perpendicular to the floor. There is a high probability that the frames are also installed with an error, which will lead to misalignment and the corner will be swollen.
The tradition is to start decorating walls with wallpaper from door and window openings originates from the need to glue overlaps paper wallpaper so that the latter is less noticeable. With the advent of vinyl and non-woven materials, such a need has disappeared, since the fabric is glued end-to-end.
Smooth corners are much easier to paste than curved corners.
For large irregularities, some tricks will help
Before you start working with wallpaper, it would be correct to building level Level each corner with plaster. Minor unevenness can be dealt with by slightly overlapping or cutting off an extra piece of fabric.
Trimming wallpaper in corners (video)
Wallpapering interior corners
A corner properly wallpapered does not wrinkle, the edges of the canvases do not diverge, forming a gap. To achieve such an accurate repair, they resort to some tricks.
For this:
- A layer of glue is applied to the wall. If the wallpaper is non-woven, you do not need to apply glue to the back side.
- The edge of the canvas is placed on the adjacent wall with an allowance of 1-2 cm.
- The wallpaper is pressed tightly against the wall using a sponge. If the canvas wrinkles, make cuts with scissors towards the swellings and straighten the material.
- After this, they begin to cut the canvas, which will lie in the corner from above. Using a ruler and pencil back side They lay out in a mirror image the overlap that went onto the adjacent wall, and cut off this excess.
- The cut fabric is glued so that the cut edge ends up exactly in the corner.
Detailed instructions for wallpapering internal corners
Wallpapering external corners
Often the kitchen design is designed in such a way that doorways It is necessary to paste over the protruding outer corner as well.
Wallpapering corners is not an easy task when the walls are highly curvature
For this:
- Take measurements from the top and bottom starting points for the wallpaper to the corner plus 3 cm to wrap it.
- Cut the wallpaper to the required dimensions.
- Apply glue to the walls with a brush.
- The edges are pressed tightly against the wall, making cuts where wrinkles form.
- If the pasting is done with non-woven material, the top layer is cut along the corner and a narrow strip is carefully removed.
- A new sheet on the adjacent wall on the other side of the corner is glued over the non-woven edge.
- Go over the joints with a rubber roller.
That's all the tricks on how to glue wallpaper in corners. Knowing these subtleties, there should be no difficulties with kitchen design. Such simple solutions will help you create a cozy kitchen interior.
How to glue wallpaper in corners (video)
Usage roll materials for surface cladding - this is a popular and sought-after solution that allows you to achieve high-quality results in short term. But the finishing technology has some nuances. It is especially difficult to glue wallpaper in the corners: the resulting coating must be free of distortions and defects. Most suitable way is selected depending on the situation.
Existing varieties have a certain order of wall cladding, which allows you to achieve the best result.
Vinyl
The technology for working with this option is no different. great complexity, if all processes are performed correctly.
Step-by-step instruction:
- The place is being prepared. For convenience, the material is rolled out onto a clean floor or a table of suitable size, pattern down.
- Trimming is carried out taking into account an allowance of 100 mm. If the coating has a complex pattern, then the pattern specified by the manufacturer is used.
- The canvas is treated with glue and folded in half for better penetration.
- The composition is applied to the wall, covering areas that extend beyond the width of the roll.
- The strip is laid on the base and smoothed out well.
- It is taken into account that standard and meter vinyl wallpapers on a non-woven base you can only glue them end-to-end; an overlap will ruin the look.
The vinyl layer on the canvas is quite durable, so the wallpaper can be safely smoothed with a wallpaper spatula without fear of damaging its integrity On a note! If you have no experience and need to adjust a complex pattern, it is better to prepare: for this, the stripes are placed on a horizontal surface, aligned with each other, and the size of the required adjustment is noted.
Paper
Gluing this variety is rarely accompanied by difficulties. For the process, you can use any glue, including homemade glue.
Algorithm of actions:
- According to the width of the roll, markings are carried out using a level and plumb line.
- The material blooms into strips, depending on the pattern. For this, a technology similar to working with the vinyl version is used.
- The canvases are well coated with the prepared composition and rolled up.
- After surface treatment, pasting is carried out. The excess is trimmed.
- Most often, paper products are placed overlapping, but strips can also be joined. It is taken into account that after drying the canvas will become narrower, so a special paper tape is placed under the seams. This rule also applies to other types of wallpaper.
It is impossible to tighten the fabric at the joint by force; the connection is aligned exclusively with the help of a rubber roller All processes, especially smoothing, are carried out with care, because even multi-layer products are very easily damaged.
Non-woven
To glue this variety, use special option glue, since the material is quite heavy. The preparation of the binder composition is carried out strictly according to the instructions and is applied only to the wall.
Process diagram:
It is important to properly saturate the base: do not leave dry areas. Places beyond the width of the canvas are necessarily affected.
Advice! To speed up the process, it is better to apply the composition with a roller.
Additionally, we suggest watching a video that describes the process of gluing non-woven wallpaper.
How to wallpaper corners correctly
Technology for laying canvases on external and internal corners has differences.
External
These areas are the most noticeable, so they must be covered with special care. It's easiest if the angle is perfectly straight, but this is quite rare.
If there are defects, the process becomes more complicated. If the corner is blocked, then you will need to trim the canvas along the bend line in order to overlap one section with the adjacent one. This method is not suitable for varieties with complex patterns.
There is another way:
- The strip is glued to a section of the wall.
- Using a special spatula, the material is carefully smoothed out to fit the existing bend, and a transition is formed.
- If required, part of the laid canvas is torn off, after which the excess is driven up or down. There should be a margin on both sides.
- To adjust the pattern in case of skew, the next strip is overlapped until the pattern is aligned with a distance of 5–10 centimeters from the edge.
- Using a ruler, which serves as a stop, the applied canvases are cut exactly according to the design.
- If required, the joining areas are additionally coated with the compound.
Joining an external corner with a trim on one of the adjacent planes is considered the most effective way arrangement This method does not completely correct the misalignment, but makes further gluing and adjustment easier.
Interior
The technology for working with such a section is almost identical to the previous process, but has some nuances:
- All sides are well processed wallpaper glue. If the composition is applied to canvases, the impregnation must also be quite thorough.
- Laying begins with the wall from which movement is carried out. The first fragment is aligned with the previous one, carefully smoothing it into the corner. To do this, the waves are driven to one side with a rubber spatula.
- The part that falls on the adjacent wall is slightly pressed.
- Further actions depend on the situation. Most often, you need to trim the existing folds in the middle and overlap the excess.
- To achieve better alignment, the edges are shortened and coated, after which the piece is placed on the main part of the canvas.
Technically, joining an internal corner is not much different from similar work on external structures, but this process is considered simpler, since internal corners are visually less noticeable This technology makes it possible to glue different types products, but if the corner does not require trimming, installation is carried out in a standard manner. To do this, the joint of both sides is made with a margin in order to level out the unevenness by adjusting and cutting at the point of alignment. This will take longer, but will get rid of the overlap in the corner.
Video tutorial: how to glue wallpaper with corners trimmed
Joining wallpaper with a pattern
Work technology:
- The strip is laid on the initial part of the wall and is gradually distributed over the surface. The waves are driven towards the corner.
- The material is carefully fixed onto the inner fragment and smoothed from top to bottom. It is taken into account that the canvas must be cut with a significant margin, since trimming the lower and opposite edges will be required.
- The part that falls on the perpendicular wall is distributed. The areas near the baseboards are adjusted.
- If the side is uneven, then it must be pasted over with the next strip lying completely in a vertical plane. The offset must affect the pattern being combined.
- A ruler is placed exactly along the line, and the excess is cut off using a stationery knife.
- The second strip moves towards the corner strip; the gap needs to be additionally glued.
If there are no problems, you can join directly along the inner corner, but this will require a certain level of skill.
Wallpaper with a pattern is joined according to the same principles as without a pattern, but if you stick a horizontal mark from the adjacent canvases in advance masking tape, then it will be easier to combine the ornament What to do if the joints are crooked
Perfect straight corners are rarely found in rooms, so to eliminate various problems, you can use the recommendation that many designers use - combination. It is necessary to cover the transition from wall to wall with wallpaper with a pattern or bright colors. Part of the pattern should extend to the adjacent side, where it is trimmed at a right angle and combined with a plain material. The joining line will be smooth, and any existing imperfections will not be noticeable.
Wallpapering the corners is the most difficult. Here, both the material itself and a properly prepared plane are important. We will look at how to properly glue wallpaper in corners in this article. Recommendations from specialists will also be given. In the video and photos you can see everything for yourself and understand better.
For perfect result, without cutting the wallpaper at the fold, the corners in the room should be even. In such a situation, all the work will consist of processing the walls and wallpaper adhesive composition with further pasting.
However, finding a room with perfectly even, geometrically correct characteristics is very difficult, even just one corner will spoil the overall picture.
What will affect the work:
| Wall evenness | This indicator is the most important. You must immediately measure the level of the wall and its deviations. After all, it may look even, but as you move from one wall to another, a distortion will become noticeable, which will increase from one strip of wallpaper to another. The pattern will begin to shift towards the corners and will look crooked in relation to horizontal surfaces. |
| Wallpaper pattern | If you have a lot of corners in the room, then pay attention to the choice of coating pattern. After all, it’s not a coincidence that will affect appearance plane. |
| Grip quality | Always prepare the base well. After all, if this is not done, the wallpaper will not adhere well and may lag. |
Possible problems and subtleties when gluing wallpaper to corners
An important point when performing of this type work is the material from which the selected wallpaper was produced. Various materials behave differently during the sticker process. And when doing the work with your own hands, you need to know these subtleties.
The instructions for this matter will be as follows:
| Without adding auxiliary layers, the most demanding. If you are dealing with them, all actions should be as prompt as possible. The paper web will quickly become saturated with liquid from the glue, and if you forget about it for a while while working, it will fall apart into pieces. |
| On the contrary, it is necessary to give enough time after applying the adhesive composition for better impregnation. But some types of vinyl wallpaper have a fairly thin coating of the pattern, so they can only be pressed against the wall with a rubber roller. Don't forget to pay increased attention corners, the adhesion of the wallpaper to the wall in these places should be maximum. |
| do not require treatment with adhesive on the back side. In this case, only the walls are coated, and the corners are impregnated twice to achieve highest strength connections. |
Note: The overlap depends on how dense the material is. For example, if glass wallpaper is used, the strips are glued joint to joint. Even a slight overlap will be noticeable.
How to glue wallpaper to an inner corner
The main goal when gluing wallpaper is to ensure that “wrinkles” do not appear in the corners, and that the wallpaper sheets themselves do not come apart.
So:
- To prevent this from happening, the canvas is wound so that a grip of no more than 2 cm is formed on the adjacent wall. At the same time, it is necessary to take into account how uneven the angle is, and the stronger the curvature, the larger the allowance left. The edge is pressed against the wall with maximum force. If wrinkles begin to form on the strip, it is necessary to make neat cuts with scissors, cutting the fabric towards the fold.
- The next step will be to make a marking; the next strip of wallpaper will be applied along it on the adjacent wall. From the allowance of the first strip that extends onto the second wall, measure the distance of the width of the wallpaper sheet, decreasing by 5 mm.
- Then, using a level, a vertical line is drawn on this section of the wall. Upon completion of the marking, the next sheet is glued. In order for it to be positioned perfectly evenly, a reference point is taken on the drawn line.
How to glue wallpaper to an outer corner
Wallpapering outside corners has its problems, but it is quite possible to avoid them if you act professionally.
Attention: In order for the wallpaper to fit perfectly on the outer corner, determine the point from which the sheet will go so that its edge goes around the corner by 3 cm.
- The edge of the sheet is pressed against the wall with maximum force. In case of folds, as well as when working with internal corners, small cuts are made.
- Along the edge of the sheet, you can tear off a thin strip of wallpaper so that only a thin edge remains. This method allows you to create a seam more neatly and make the overlap less noticeable.
- After this, using a level, mark from the corner a value equal to the canvas and increased by 0.5 cm. Along the resulting line, the next sheet is glued so that its edge overlaps the torn edge of the previous canvas.
- The joint is pressed with maximum effort, the upper and lower edges of the wallpaper are trimmed using the trimming method, after which the sheets are rolled with a rubber roller.
How to hang wallpaper with a pattern in the corner
When wallpaper has a pattern with vertical stripes, the corners will be most visible if it becomes distorted. And with horizontal lines, violations of the pattern will be visible when approaching the floor and ceiling plinths.
Avoiding such problems is easy:
- Don’t forget to leave an overlap on the next wall;
- hide the resulting joint in the upper part of the corner;
- Glue the wallpaper in the corner of the room so that the edge of the canvas lies perfectly even with the line drawn in advance. In this case, the second edge is cut to the edge of the corner.
It is rarely possible to completely avoid distortion of the drawing; minor errors are likely to remain. But only you will know about this drawback. After all, to detect it, you will have to very carefully examine all the corners in the room. If all the rules are followed, the wallpaper will be positioned perfectly evenly, and the pattern will not be disrupted.
Nowadays non-woven wallpaper or wallpaper based on it is becoming more and more popular, and this is not at all surprising. They are distinguished by durability, ease of maintenance, and soundproofing qualities. In addition, in Lately Manufacturers produce wallpaper twice as wide as a regular roll, 1 meter and several centimeters wide. Thus, gluing can be done several times faster, and there are fewer joints.
But many are afraid to purchase non-woven wallpaper because they are worried that they will not be able to stick it correctly, especially in the corners. Such worries are absolutely groundless, because in order to cover the corners efficiently and beautifully, it is enough to know simple rules. Let's look at this topic in more detail.
What is non-woven wallpaper
In fact, this is wallpaper that is made of foamed vinyl, and the base is non-woven material. This lining material is based on cellulose fibers, which should be at least 70% of the composition. Their main advantage is that they visually level out all the unevenness of the wall, making it perfectly smooth. Also, vinyl wallpaper on a non-woven backing insulates the room from extraneous sounds: the knocking and screams of neighbors behind the wall will become less noticeable.
Non-woven wallpaper or vinyl wallpaper on a non-woven basis can be painted several times and even washed with a sponge to remove dirt. And when you decide to make repairs and peel off the wallpaper, only the top layer is removed, and the non-woven layer will serve as the basis for gluing new ones.
Non-woven wallpaper is very practical; you don’t need any special skills to glue it. But there are a few tips that will undoubtedly be useful to owners who decide to do the repairs themselves.
You can clearly see how to glue non-woven wallpaper in the video:
Gluing internal corners
Remember, the main rule for pasting corners is not to do it with one piece, so that one part of the solid strip is on one wall, and the second on the other. In this case, the non-woven wallpaper may stretch, and the result will definitely not hit you. This rule applies to both internal and external corners. The right decision will cover each wall with a separate piece, which simply fit together correctly.
To glue correctly, there are several ways that will undoubtedly lead you to the expected result.
Option 1. One of the most simple methods is wallpapering in the corner with an overlap. Thus, one sheet is glued with a spacing of 1-1.5 cm, and the second exactly along the corner line, i.e. There is no gap between the wallpaper, and the angle is neat and visually even.
Attention! Non-woven wallpaper is quite dense and thick, so the cut will still be visible.
Option 2. This method is most often used in rooms where the walls are not quite right and are a little overwhelmed. The first sheet is pasted with an allowance on the adjacent wall, so as to cover the entire corner. The width of the overlap depends on how much uneven walls in the room. The second one is also glued with an overlap, so that the design is not distorted or displaced. After this, use a level or any other flat object to press a clear line, and use a sharp stationery knife to make a precise cut. Then easily remove the top excess strip.
The bottom part will be more difficult to remove, but just peel back the glued top part and you'll be good to go. After this, reapply glue to the edges and carefully attach them in place. The whole procedure should be carried out as quickly as possible, and then you will receive perfect angle not even on these smooth walls.
Option 3. One strip is glued to the wall with an overlap of about 2 cm. Then, using a plastic spatula, it is carefully driven into the depths of the corner. All folds and irregularities can be eliminated quite simply: you need to make several cuts and overlaps, thus eliminating the unevenness of the canvas and the wall.
Next, take a long metal spatula, press it tightly to the corner and carefully cut off the excess material in one motion. The second strip is glued in the same way and cut. If everything is done correctly and carefully, you will get a monolithic seam that will be almost invisible to prying eyes.
Some options can be seen visually here:
External corners
In addition to internal corners, any room also has external ones. Often these are window slopes or niches and protrusions that cannot be ignored. They have their own characteristics of pasting. With the help of small secrets, gluing will become easy, and the corners will be neat and beautiful. The algorithm for pasting external corners is as follows:
Some more tips and interesting solutions To correctly glue wallpaper, including non-woven wallpaper, on uneven walls, you can watch the video:
In the end, I would like to say that non-woven wallpaper and non-woven wallpaper are quite dense and practical material, which is very easy to glue. It cleans well and will please the eyes of its owners for a long time.
The interior is being presented now high requirements. Owners of Khrushchev apartments, who have repeatedly glued paper trellises in their apartments, now do not dare to begin repairs with their own hands. They don't know how to put wallpaper in the corners to make the room look good. Vinyl and non-woven fabrics are more difficult to work with. They are heavy and require certain skills. If you properly seal the corners with wallpaper, then the next repair will not happen soon.
Uneven corners frighten novice craftsmen, but even ones are very rare
It is difficult to bring two planes together perfectly. Therefore, even with smooth walls, the corners have a lot of deviations. I had a lot of work and Vadik had to decorate his aunts’ apartments on his own. He was hesitant to start because he didn’t know how to properly glue wallpaper in the corners.
I decided to show my friend how to wallpaper the rooms of old houses in practice. One of my teams was renovating an apartment in a historical building. Vadik could see:
- preparation;
- alignment methods;
- how to use perforated corners;
- finishing the room.
The technology for finishing corners with wallpaper of all types is the same. Only thin paper trellises and fiberglass webs can differ. Work must begin from front door rooms when gluing end to end. When applying the edges of strips of thin trellises - away from the window.
Preparation and leveling makes subsequent finishing easier
When doing renovations in old apartments, I always putty the walls and install perforated corners. They simultaneously serve as beacons and protect the ledges from destruction. I choose cardboard ones if the inner corners have slight unevenness. In all other cases I use a PVC profile.
- I'm checking laser level verticality of the walls. You can use a plumb line. I choose a flatter base surface.
- I putty and embed the profile in the solution, leveling it.
- After drying, I smooth it with another layer of putty. For paper and non-woven wallpaper I use an additional finishing compound.
If customers don’t want to spend money on leveling and corners, then I simply fill up large depressions. I cover the corner with wallpaper, cut a strip 10–12 cm wide. I place it evenly on both walls, making cuts for a tight fit. After this, it is easier to glue wallpaper in the corners. If the top fabric has to be cut or the paper trellises burst, then thanks to the background made of the same material it will not be noticeable.
Advice! It’s better to align the corners well once than to fool your head every time you wallpaper a room.
Paste over the protrusions
The last strip in front of the corner is cut off so that it extends onto the other wall by approximately 2–5 cm, depending on the curvature. The greater the differences, the wider the approach. It should completely cover the most convex place by at least 8 mm.
For a better fit, I make notches with a sharp knife or just cuts with scissors. It is desirable that they be inclined towards the edge. I cover the corners with wallpaper and smooth out the main part first, then the strip around the corner.
How to glue wallpaper in the corners of an apartment?
Before you start gluing the wall from the corner, measure the width of the trellis and draw a line vertically along the level. I also check the condition of the corner. Side surface The strips should go along the deepest dent. I paste it strictly vertically, according to the markings. Near the corner the edge lies flat. The protrusions are hidden under the wallpaper that was pasted earlier.
It is better to cut wallpaper with large patterns so that the lines match. A slight shift will not be noticeable.
I cut thick vinyl wallpaper using a ruler at a distance of 2 mm from the edge of the top sheet. With a sharp knife I cut both pieces strictly vertically along the entire height. I remove the excess and the canvases lie end to end. For strength, I put a painting mesh.
Advice! Use clear glue.
We start gluing from the door
My friend was able to see everything and now wallpapering in the corners did not scare him. Before you start finishing the room, you should draw vertical lines and check the condition of the corners. If not professional level, you can use a weight on the thread.
- We glue it with an overlap of up to 5 cm on the adjacent wall.
- Smooth the main fabric to the corner and glue it.
- We make cuts and tightly fill all the unevenness with wallpaper.
- We mark the vertical and, taking into account the pattern, glue the next strip end-to-end to the corner.
- Using a ruler, we cut both sheets at a distance of 1–2 cm.
- Remove excess pieces of wallpaper.
- Having bent both edges, we glue the painting mesh. Coats it with additional glue.
- We connect the strips end to end along the cutting line and press.
Before gluing wallpaper in the corners, make an approximate marking of the location of the stripes on all walls. If a piece of wallpaper ends close to a corner, immediately move the first strip. You can start with a strip cut along the length.
Simple techniques to hide unevenness by combining
I told Vadik earlier that to create original interior combination with different patterns and tones is used. After a tour of the ancient building, he expressed the opinion that the designers came up with such a technique to hide defects.
Before starting renovations, consider options for decorating the interior with companion wallpaper. First, cover the walls with trellises with a pattern, extending onto the adjacent wall. Then you create the transition with plain stripes. The cutting lines will visually look like straight corners. Irregularities will not be noticeable.
For inexperienced lovers, combining is more accessible than wallpapering with a pattern. At the same time, you adjust the shape of the room and enlarge it.
How to choose the right wallpaper depending on the shape and purpose of the room