Steampunk Christmas tree. Steampunk Christmas tree

New Year inspires creativity. We decided to experiment a little and make a Christmas tree out of metal, so to speak, a harsh male version of the New Year's beauty.

Materials needed.

1. An old table lamp.
2. Trimming half an inch and three-quarters of an inch of water pipes.
3. Waste bike chain.
4. Old bicycle rear sprocket.
5. Self-tapping screws of different lengths.
6. A pair of broken alarm clocks, Soviet production.
7. A can of black paint.
8. Paint imitating bronze.
9. Polymer glue Dragon.

Handy tools.

1. Welding inverter.
2. Angle grinder.
3. Gas burner but you can do without it.

We will use the base of a table lamp as the basis for the future tree.

We estimate the approximate size of the branches.

We increase the size of the branches of each next tier by about three to four centimeters.

We mark our dimensions on a half-inch pipe.

We cut the pipe, alternating a cut at ninety degrees with a cut at forty-five degrees.

In our case, we got four segments of four, four of seven, four of eleven and four of fifteen centimeters. We weld segments of the same length with even cuts to each other. It is advisable to put some kind of gasket under the joint in order to give the future branches a slight downward slope.

From a pipe three-quarters of an inch in diameter, cut four pieces of about seven centimeters each.

Now we string the resulting parts onto the frame, from the largest to the smallest. The three-quarter inch pipe lengths mimic the trunk of our tree.

We arrange tiers of branches between each other.

We weld the parts together, leveling along the way.

We measure and cut off the pieces of the bicycle chain.

We weld the chain segments to the branches, simulating garlands.

We make the top of the tree from the rear sprocket of the bicycle.

We weld self-tapping screws to the branches, from the bottom it is more authentic, to the top we reduce the size of the self-tapping screws. We create, as it were, symbolic needles.

Before painting, the metal must be degreased, we used a gas burner for this, but you can do with a solvent.

We paint our product.

Apply a paint that imitates bronze with light brush strokes. It looks like scuffs on a painted bronze Christmas tree.

We disassemble the old Soviet alarm clock and take out the gears. An alarm clock is needed exactly the old one, in modern gears, unfortunately, plastic.

Oksana Konetskaya

Our miracle tree»We make together.

Target: learning the technique of making souvenir crafts from waste material.

Tasks:

Introduce children to fantasy style« Steampunk» (second Life junk little things)

Develop an interest in making crafts from waste material.

Fantasy, creative imagination, manual skill, give "New" life to old things.

Do you want to use all unnecessary waste trifle for creating a creative Christmas tree? It seems to me that this is a great idea, it can be done with children of different ages - everyone will be fun and interesting. Shall we create?

It all started with a bunch of unnecessary things (chains, beads, shells, buttons, etc.) what has been accumulated by us for the year (it's a pity to throw it out - it will suddenly come in handy)

And at the same time needs: cardboard for cone, glue "Titanium", hot glue gun, spray gun with silver paint, other tools (scissors, glue sticks, etc.)

Steampunk is not a style for every day, but a great way to dress up for a theme party, make a gift or craft from the accumulated waste material... With children of different ages, it is easy and simple to arrange such a Christmas tree, the main thing is waste material... You will definitely succeed, dare, try and achieve an excellent result.

Related publications:

In our preparatory group "Birch" there was a competition "My wonderful autumn hat". The competition was held as part of our preparatory work.

Photo report on the festive event "Fashion show from waste material" The purpose of this event: To attract parents to create new ones.

Familiar things can sometimes serve as an unusual service. I have been using multi-colored drink lids for a long time in games with children. And this time.

PHOTO REPORT ABOUT CREATIVE WORKS ON THE "SNITCHA" MODEL TASKS: To teach to roll the sausage. Develop fine motor skills of the hands. Foster a desire to work.

Every year contests take place in our kindergarten. Each group takes part. I am always amazed at the ingenuity of parents and children. How many.

In our Kindergarten, such a tradition appeared a long time ago; every autumn we hold a competition for crafts made from natural and waste material.

Winter is a serious test for birds. Therefore, it is necessary to take care of our smaller brothers, to help them survive the cold. After all, with the onset.

Video content called "" was posted by the author "Master Sergeich" for 3 years. ago, it was watched 8, 462 times. 224 liked the video and 13 users disliked it.

Description:

A creative steampunk tree with your own hands is a great decoration for the new year.

To create a steampunk Christmas tree you need:
1. Cardboard;
2. Junk from the garage;
3. Hot melt glue;
4. Paint spray;
5. Acrylic paint;
6. Rhinestones;
7. Varnish spray.

A creative idea with your own hands that can be implemented in a couple of hours. Create a steampunk with your own hands and decorate your home or give it to a friend!

See what kind of trees we made:

Christmas tree made of cardboard:

DIY Christmas tree made of cardboard and plum pits:

10 Christmas trees made of different materials:

============ [INFORMATION] ============
✅ Visit our website:
✅ Group in Odnoklassniki:
✅ I'm in Odnoklassniki:
✅ Group in VK:
✅ I'm in VK:

✅ Donate for the development of the channel and for creative success!
✅ Fast way:
✅ DonationAlerts:
✅ WebMoney:
✅ R427258245077 rubles
✅ Z278116059579 USD

Subscribe to our channel Master Sergeich: Video source youtube.com/watch?v=9GrqlvQHV-w

This video material about sculpting can be viewed online, as well as downloaded absolutely free of charge and without registration in almost any video format: mp4, x-flv, 3gpp and so on. You just need to click on the "Download" button at the top of the site and move the slider to the right. In addition, you can watch other educational video about modeling from plasticine, salt dough, clay and so on from the author Master Sergeich, which are also posted on our website, as well as other similar educational videos about modeling, crafts, materials, art and the like. If you need a mobile version of this video, then our site has a modern responsive design and is suitable for any mobile device: tablets, smartphones, phones, and so on.

The classic way to prepare for the holiday is to decorate your home and traditional spruce. In order for the upcoming event to differ from the usual ones, you can make accessories and decor items with your own hands. Make your holiday special.

No holiday is distinguished by such a magical and pleasant preparation period as the New Year.

People spend a whole month creating a fabulous and happy atmosphere. Honestly, the success of your favorite special occasion depends entirely on your efforts. Don't expect the Christmas mood to kick in on its own. Create a miracle yourself!

The classic way to prepare for the holiday is to decorate your home and traditional spruce. In order to make the upcoming event different from the usual, you can make accessories and decor items do it yourself... Make your holiday special.

1 .Christmas toy do it yourself from a light bulb - Penguin