There are a wide variety of stickers sold in stores, but sometimes you need unique stickers with a specific lettering or image in the right size.
How to be in this case?
The first option is to order them at the nearest printing house or design studio.
The second is to do it yourself at home. In this article, we will analyze in detail several ways to make stickers on your own and at low cost.
We make stickers with our own hands at home - step-by-step instructions
- Method 1 is the easiest: Sticker printed on self-adhesive paper.
Everything is easy and understandable here: it is enough to buy special paper on a self-adhesive base and print an image of a suitable size on it.
- Method 2: Sticker with a transparent background based on adhesive tape.
This simple method produces a high quality sticker that is water resistant and very durable.
Make a sticker at home using scotch tape easy peasy.
All that is needed for this is a laser printer (inkjet will not work!), Plain paper, wide tape and a hair dryer.
Manufacturing technology is as follows:
- We print an image or text on a laser printer;
- We glue a wide adhesive tape over the picture;
- We place the future sticker in a container with warm water for a few minutes;
- Under the tap (preferably warm water), we completely wash off the soaked and soaked paper;
- Dry the sticky side of the sticker with a hair dryer;
- We glue it on a degreased dry surface, gently smooth it.
- Method 3: Self-adhesive stickers based on homemade glue.
This is a more laborious method in comparison with the previous ones, since it is additionally necessary to prepare the glue.
For this technology, you will need the following materials, tools and ingredients: Paper, a printer (you can do without it if you draw a picture by hand), scissors, one bag of gelatin (12 grams), a teaspoon of sugar, a brush for applying glue.
The technology for making stickers is as follows:
- We print a picture on a printer or draw by hand;
- Cut out the image along the contour;
- Cooking glue. To do this, pour a bag of edible gelatin into a suitable container, add granulated sugar and fill it with a small amount of boiling water, sufficient to dissolve the components. After a few hours, the mass will take on a gel-like shape - the glue is ready;
- We put glue on the back of the future sticker, let the glue dry.
The sticker is ready! Now, before gluing, it is enough to moisten the sticky surface with your tongue or water and apply to the desired place.
To make the sticker more resistant to moisture, transparent tape can be glued over the front side.
- Method 4: Stickers based on double-sided tape.
This is another easy way to make stickers.
All that is needed for this is a prepared picture (printed on a printer, drawn or cut from a magazine) and a wide double-sided tape.
To get a ready-to-use sticker, it is enough to stick the adhesive tape on the back.
Now, at any time, it is enough to remove the protective film from the adhesive tape, and the sticker can be glued to almost any surface - glass, plastic, wood, etc.
As with stickers without double-sided tape, clear tape can be used to protect the face.
- Method 5: DIY vinyl sticker.
To make a vinyl sticker at home, you need to buy a film from Oracal or Avery (sold in hardware stores, available in different colors and shades).
A suitable image is applied to the film with a pencil and cut along the contour with scissors or a clerical knife.
Since the film has a self-adhesive backing, in order to stick the sticker, it is enough to remove the protective layer from the back side.
- Method 6: Paper sticker made of transparent tape.
Stickers are an unusual interior decoration. They can be used to decorate a kitchen, children's room and even a bedroom. You can bring a dry work environment to life with stickers. It is useful to use them for children's creativity. After reading this article, you will learn how to make DIY stickers.
How easy is it to make them?
Stickers for kids are very easy to make. You do not need special materials and tools, everything can be found at home. We will tell you in detail how to make a sticker at home.
First, pick up the tools and materials. You will need:
- Large format thick white paper. The larger the sheet, the more stickers you get. You should not take paper that is too thin, since it will quickly get wet from the glue and tear.
- Rulers, pencils, felt-tip pens, markers, paints - to create a drawing.
- Stencils, coloring books for children and books.
- Large brush.
Ingredients for making adhesive
- Gelatin (approximately 8-10 grams).
- Cold water (1 tablespoon).
- Sugar syrup (1/2 tsp).
- Lemon extract (1/2 tsp).
- Hot water (3 tbsp. L.).
Sticker making technology
Step 1
Determining the size of future stickers. The sheet of paper needs to be distributed into squares using a ruler and a pencil.
Take pictures from children's coloring books or books.
You can choose the drawing you like, and then print it on a printer or redraw it directly from the screen with a bright felt-tip pen on a thin sheet of paper.
How to make a sticker so everyone will like it? Search for images of famous cartoon characters and fairy tales. In addition, butterflies and flowers are always beautiful. Before the New Year holidays, you can make stickers with Christmas trees, snowmen, the symbol of the year.
Step 2
We decorate the drawings. You can use not only traditional pencils, markers and paints, but also glitter gels. The finished base with stickers does not need to be cut yet, we will cover it with an adhesive composition.
Step 3
We make the adhesive base for the sticker.
To make DIY stickers, you need homemade glue.
Pour gelatin into cold water and wait 40-60 minutes until it swells. Then heat a little and add sugar syrup and citric acid. The solution must not be brought to a boil. We remove the pan from the stove and wait until the composition cools down a little.
Step 4
Take a large brush and spread glue on the back of the sheet. The glue should dry and the paper will curl.
Step 5
Place the sticker sheet under the straightening press. For example, you can use a heavy book.
Step 6
Cut the stickers, moisten with a damp cloth and stick.
Do not discard any glue residues. It will become gel over time. Store it in a tightly closed jar. Household glue has a shelf life of several months.
If you want to use it again, place the container in a pot of warm water. Now you know how to make a sticker at home.
Wall Decoration Stickers
Another interesting way to make stickers is with self-adhesive vinyl.
Step 1
Choose the film of the desired color. Choose so that the color matches the interior.
Step 2
We put the drawing on the film and cut it out. If you don't know how to make a sticker at home, choose simple drawings. When you have your first masterpiece, you can glue on entire compositions.
Step 3
Carefully cut out the drawing. It is important to first attach it to the wall and make notes with a pencil where the decor element will be placed.
Step 4
Preparing the wall for gluing. The wall must be smooth, clean and dry. Rust, old paint, dirt will get in the way and the decal will not look neat. In addition, the wall should not be greasy. Wallpaper, if glued well, will only emphasize the beauty of the picture.
Step 5
Carefully lay out the sticker on a hard surface, smooth and separate the paper base.
Step 6
We stick it on the wall. If the sticker is large, it is best to stick it with an assistant. If you are working alone, you can stick it piece by piece. Smooth the finished drawing to the wall so that no bubbles or wrinkles remain. Now admire your piece of art.
A simple sticker can change the interior for the better. You have learned the easy ways to make a sticker at home. We hope our tips will help you enjoy your creativity.
Good afternoon.
A sticker is not only fun for children, but also sometimes a convenient and necessary piece (it helps to quickly navigate). For example, you have several identical boxes in which you store different tools. It would be convenient if each of them had a specific sticker: here are drills, here are screwdrivers, etc.
Of course, in stores now you can now find a huge variety of stickers, and yet, not all (and it takes time to search)! In this article, I would like to consider the question of how to make a sticker myself without using some rare items or equipment (by the way, the sticker will not be afraid of water!).
What do you need?
1) Scotch tape.
The most common scotch tape will do. On sale today you can find scotch tapes of various widths: for creating stickers - the wider, the better (although a lot depends on the size of your sticker)!
2) Picture.
You can draw a picture yourself on paper. Or you can download it on the Internet and print it on a regular printer. In general, the choice is yours.
3) Scissors.
No comments (any will do).
4) Warm water.
Plain tap water will do.
I think that practically everyone has everything that is needed to create a sticker! And so, let's go directly to the creation.
How to make waterproof sticker by yourself - step by step
STEP 1 - find a picture
The first thing we need is the picture itself, which will be drawn or printed on plain paper. In order not to look for an image for a long time, I just printed a picture from my previous one about antivirus software on a regular laser printer (black-and-white printer).
Rice. 1. The picture is printed on a conventional laser printer.
By the way, now there are printers on sale that can immediately print ready-made stickers! For example, on the site http://price.ua/catalog107.html you can buy a barcode and sticker printer.
STEP 2 - processing the image with scotch tape
The next step is to "laminate" the surface of the picture with tape. This must be done carefully so that waves and folds do not form on the surface of the paper.
Scotch tape is glued only on one side of the picture(from the front, see Fig. 2). Be sure to smooth the surface with an old calendar or plastic card so that the tape adheres well to the paper with a picture ( this is a very important detail).
By the way, it is undesirable for your picture to be larger than the width of the tape. Of course, you can try to glue the scotch tape in the "overlap" (this is when one strip of scotch tape partially overlaps the other) - but the final result may not be so hot ...
Rice. 2. The surface of the picture is sealed with tape on one side.
STEP 3 - cut out the picture
Now you need to cut out the picture (regular scissors will do). The picture, by the way, is cut to the final dimensions (i.e. this will be the final size of the sticker).
In fig. 3 shows what I got.
Rice. 3.the picture is cut
STEP 4 - water treatment
The last step is processing our workpiece with warm water. This is done quite simply: put the picture in a cup of warm water (or even just keep it under running water from the tap).
After about a minute, the back surface of the picture (which is not treated with tape) will get wet well and you can easily start removing it with your fingers (you just need to gently rub the surface of the paper). You don't need to use any scrapers!
As a result, almost all the paper will be removed, and the picture itself will remain on the scotch tape (moreover, it is very bright). Now you just have to wipe and dry the sticker (you can wipe it with a regular towel).
The resulting sticker has several advantages:
It is not afraid of water (waterproof), which means it can be glued to a bicycle, motorcycle, etc.;
The sticker, when dry, fits very well and sticks to almost any surface: iron, paper (including cardboard), wood, plastic, etc.;
The sticker is durable enough;
Does not fade or fade in the sun (at least a year or two);
And the last thing: the cost of making it is extremely low: one A4 sheet - 2 rubles, a piece of scotch tape (a few kopecks). Finding a sticker in a store for such a price is almost impossible ...
PS
Thus, at home, without having any specials. equipment, you can make fairly high-quality stickers (if you fill your hand, you cannot distinguish them from purchased ones).
That's all for me. I would be grateful for the additions.
Good luck with your images!
Pasting funny ornaments is a familiar activity from childhood. Such funny details can beautifully complement the interior of the house. As a rule, this way you can decorate a nursery. Stickers can be used to decorate a pencil case, a box for small items or a box of toys. Gluing ornaments is a great way to keep your child entertained, but adults can also enjoy the same activity.
You can decorate clothes with glue appliques, they can be glued to musical instruments, or you can make a unique light bulb with a boring lampshade. The details of the product are made from film, paper or fabric. There are a lot of manufacturing options. The main thing is the selection of an organic option. ... In a word, it is unlikely or it will be possible to find a more suitable decoration technique..
Basic methods
There are several methods, you need to start with the simplest.
You can print the drawing on color or black and white paper - it all depends on the taste of the artist. The drawing can be copied using a photocopier... Then the blanks must be cut and glued together with ordinary glue, for example, PVA. These stickers are very simple to make, but they are short-lived, sensitive to moisture and bright sunlight. If the workpiece is made with a gel pen or pencil, then over time, its outline will blur and become indistinct.
If you need to create a small blank, you will need to repeat all the steps as in the first option. But you need to glue on tape... It needs to be glued to the back of the image and to the surface where you plan to place the sticker.
Lamination
Self-adhesive paper and stencils
In a stationery store, you can buy special self-adhesive paper, it can be ordinary or decorative.
Garment decoration
If you plan to make a sticker on your clothes, you will need other materials. You can copy the pattern you like from a plastic bag and, using parchment paper as a base, apply the pattern to the fabric and iron it with an iron. Or draw a pattern on plastic yourself. Applying packs of different shades, you can create very attractive applique style stickers. It is only necessary to choose pictures of a small size - large ones will look ugly.
Manufacturing rules
Remaining glue can be saved. It will gel over time. The composition must be stored in a tightly closed jar. The shelf life of homemade glue is several months. If you need to use it again, place the container in a pot of warm water.
Dignity
Vinyl decals have many benefits.... One of the main ones is the low cost of such products. Pasting the entire car will cost its owner about 25 thousand rubles, and the price of applying vinyl products to individual parts of the car body will be 7-8 thousand rubles. Many will agree - this is a price that will not do much damage to the wallet. For example, airbrushing will cost at least 5 times more. If we compare it with the well-known Oracal film, which is relatively inexpensive, the difference will be even more noticeable.
Significant cost savings when using vinyl stickers can be achieved due to the fact that the idea of a future pattern can be searched somewhere on the Internet. This means that you do not have to use the services of professional artists, which are very expensive. If the creator of the stickers has experience in such a program as Corel Draw, then the image of the future drawing is completely possible to come up with from scratch on your own. In this case, the sticker on the car is 100% will turn out to be unique and unique. Advertising can be applied to a car in the same way.
Film selection
First you need to decide on the manufactory and the pattern from which the sticker will be made. The material is usually vinyl. It can be of several types:
Working conditions
In order to qualitatively apply an ornament to a car with your own hands, you must strictly adhere to some safety rules:
Stickers on the car
Ornament for a car or motorcycle can be purchased ready-made or made with your own hands. In the latter case, you need to draw a suitable drawing on paper or find a ready-made template on the Internet and print it. Then the design is transferred to the vinyl blank and cut ... Having a ready-made template on hand, you can go directly to its sticker on the car.
Methods
There are several methods of pasting cars, but in an ordinary garage, it is better to use a dry or wet method.
If you've decided to start making stickers with your own hands, our tips will definitely come in handy. There are several ways, good advice, with which you can easily make an accessory at home. The main thing is to remember how to proceed and be careful.
We make stickers at home. Simple ways
Now you will learn a few good methods to make a sticker at home quickly, effortlessly. The costs will be minimal, but the result will please you.
There are some more nuances. They will be useful to you. Here is what the expert notes: “If you use a self-adhesive film, you need to buy it in stores that have proven themselves well on the market. Otherwise, your parts may be of poor quality due to poor adhesive surface. "
The scissors must be sharp. Sometimes it is more convenient to use large rather than small scissors, since they can easily cut off the contour without making unnecessary uneven cuts. It is necessary to carry the scissors continuously, without folding them.