In winter for most children the best entertainment is skiing on a snow slide. Combining this activity with sculpting a snowman and playing snowballs, you can have a great leisure time at fresh air... Moreover, during the winter holidays, options active rest must be associated with visiting the street.
In order to get the most out of a quick descent, you need to know how to properly fill the slide. This requires the presence of certain conditions and some means. The most important of them are snow and frosty weather. If they are absent, the idea of skiing will not have to be postponed until the onset of appropriate weather conditions.
We pour a slide of snow
Initially, you need to build a slide of the required height and desired design from the snow and carefully compress all the snow elements. This will make it durable and will not let it sag during active use. So that there is no question of how to fill the slide correctly, you need to perform all actions in a strict sequence and not neglect any of them.
We strengthen the slide with water
The next step will be to fix the snow slide and give it strength. But before this, the existing structure must be allowed to settle and sit for several days. After that, in the presence of severe frost, you can apply to the entire surface of the slide cold water... It is best to spray water to keep the snow surface intact. Otherwise, the snow will simply melt, forming grooves and irregularities.
Watering a slide from a watering can
Another option for how to properly fill the slide in winter is to use a watering can for this purpose. With it, filled with water, you need to water the entire surface snow mountain from the bottom to the top. Moisture should be evenly distributed over the entire pitched area. This will keep the surface smooth after the water is completely frozen.
Let's make the surface of the slide even
In order to understand how to properly fill the slide, you need to take into account such a moment that in the case of the formation of pits and irregularities, clothes can be damaged when sliding along them.
To eliminate such a plan of defects, you need to use a small amount of snow mixed with water to a slurry consistency. With this mixture, you need to close up all the grooves and smooth out all the irregularities. If necessary, it can be used to apply over the entire surface of the mountain. This will align all the protrusions and recesses and further strengthen the structure.
For a more comfortable descent, the slide can be equipped with bumpers. They can be molded from wet snow. The edges of the bumpers should be as smooth as possible to avoid damage to clothing or body parts.
Use a hose to reinforce the slide
Another excellent option How to fill the slide correctly is to use a hose with a spray nozzle for this purpose. This method is possible only if there is a water supply system or a water column in the immediate vicinity. Water must be poured carefully, avoiding snow melting. To start applying water is from the top, gradually dropping down. This procedure needs to be done several times, then the question of how to fill the slide correctly will be completely closed.
After a few hours, the wet snow should freeze completely. If this did not happen, you should wait until it completely solidifies. After that, it's time to start skating. A flat and smooth surface of the descent is a guarantee of high sliding speed. A properly made slide can deliver a lot of pleasure, joy and positive emotions... If you follow these tips, there will no longer be a question of how to properly fill the slide.
When descending the ice slides, you should be extremely careful to avoid injury to yourself and those around you. Young children must ride under the full supervision of an adult to prevent injury and to avoid possible accidents.
To make a slide of snow, you must choose for it optimal place, away from the roadway, away from various obstacles, bushes, trees, fences, and so on. After the location of the slide has been chosen, you need to bring a lot of snow and make from it big mountain... The future height of our ice slide will depend on the height of this snowy mountain.
A good height for small children is two meters, and for older children three, four meters or more. Length snow slide can be from three to five meters, also depends on the length of the snowdrift. Use a stretcher and a wide snow shovel to pack snow faster.
Before making a slide of snow, you need to try to give the desired shape to our artificial snowdrift so that it is two-thirds shallow, and one-third not. Now we turn to the formation of steps, on one side of our snowy mountain, and a smooth slope, on the other side.
The steps are formed with a shovel and are compacted with the feet, while unnecessary and unnecessary snow is thrown away. It is more convenient to form steps with a narrow shovel, since it is much more maneuverable in work. The safe width of the steps is fifty centimeters. The slope is filled with cool water from a watering can or a hose with a spray nozzle.
In the process of filling the slide with water, ice bumps are formed along the edges, which will not allow children to fall out during winter skiing. A slide of snow is poured with water several times, after the first, a thin and fragile crust forms, after the second - rough ice, and the third time can be poured for the greatest strength and smoothness of the surface.
Please note that the water should be exactly cool or very cold, but not hot, it can ruin the entire slide. If the surface of the slide is bumpy, fill it four or five times until it is perfectly flat and smooth. Here is a do-it-yourself slide of snow, you can gladly ride it with the breeze.
If such an ice slide needs restoration, it is necessary to bring more snow, re-form a snowdrift of the desired shape, fill the slope and update the steps. If deep recesses have formed in the slope, you can cover them with snow and moisten them abundantly with water, after which you can ride on the slide again.
It is best to build a snow slide at temperatures up to eight degrees below zero. With more high temperature the snow begins to melt, and at a lower level, it is very hard and cold to work. You can slide down the ice slide on a piece of cardboard or special bright ice sheets. Children under three years old at a snow slide require close supervision, attention and guidance from their parents; riding a slide can be a very dangerous activity for them.
It is necessary to build and fill the slide at sub-zero temperatures.
Tyumen and Tyumen Region News - 12/21/2015
The most pleasant memory from childhood is, of course, winter fun. Games in the snow, sledding, ice skating, skiing and slides. We will talk about the latter in more detail and describe how to make it out of snow and how to fill it correctly.
How to build a slide with your own hands in Tyumen
In practice, many have faced a serious problem when. It then disintegrates, then collapses, then pits form on it after pouring. We will teach you how to do the correct slide yourself without unnecessary physical effort.
So, let's begin. To make a slide yourself, you will need:
- Pure snow
- The water is cold)
- Shovel or stretcher
.jpg)
- Ladle, watering can
- broom
To make a slide of snow, you need to build on a few simple rules:
Choose a safe place
1) If you will build it in kindergarten or in your backyard, then you do not need to beware of nearby roads. And if you are making a slide in an unfenced area, then you need to choose a safe place. Far from the roadway, far from various obstacles, bushes, trees, fences and so on, so as not to harm the child.
You need to build a slide from pure snow
2) After the location is determined, it is necessary to pack a lot of clean snow. Average and most safe slide for children - from two to four meters. You can use a stretcher or a large shovel to carry snow. We used a shovel. Let's say in advance, it took us half an hour to erect a meter-long slide. Mostly it took time to bring to the place required amount snow. Then we collected the snow in one pile and formed a base from it - a slide.
How to make steps and sides of a slide from snow
3) After the base, we make steps. They are easy to make with a shovel. It is necessary to compact first with your feet, and then shape with a shovel. It is important to make them comfortable and small so that the child can easily climb to the top. By the way, the safe width of the steps is from fifty centimeters. Do not forget about the sides. They can also be done with a shovel and hands. Choose the height based on the height and weight of your child. On average, the sides are made in 10-30 centimeters.
How to properly fill a slide of snow
4) When the base of the slide is formed, we move on to the most difficult process: pouring. The slope is filled only with cool water from a watering can, a hose with a spray nozzle or a bucket. It should be remembered that you need to fill in at a low temperature - on average from minus 10-20 degrees. Otherwise, all your efforts are down the drain. Important! You need to fill the slide in three to four stages. To make the slide even, without pits and bumps, you need to use a regular broom when pouring. Yes, broom! We level the surface of the slide with a broom, and your children can easily slide down the slide with great pleasure!
When pouring a slide, you need to slam the surface with a broom
5) A hill of snow is poured with water several times. After the first, a thin and brittle crust is formed, after the second - coarse ice, and the third time can be poured for the greatest strength and smoothness of the surface. When you fill the slide for the first time, pat the surface with a broom! If you adhere to all these rules, then you will have a great homemade slide!
- Choose pure snow! If you neglect this rule, then when it gets significantly warmer outside, your children can get dirty!
- Try to make the slide smoother, without pits, depressions or bumps. If there are sharp bumps on the slide, children can tear their clothes.
- The good and the most best height for children - two meters, and for older children - three, four meters or more. For small children it is better to do necessary supports to avoid falls.
- You need to ride the hill on the ice. Ice-cream can be bought in a store for an average of 100 rubles, or you can make it yourself. You can make an ice cake from linoleum or use a simple cardboard.
Skiing from the mountain is a favorite pastime for children of all ages and only adults can provide them with convenience and comfort in such a business, and they have more than enough fun and enthusiasm. The slide can be built from a variety of materials at hand, and from which, will be described in this article.
What is needed for the slide
In order to make a slide with your own hands, you can use metal, plastic, wood, as well as improvised materials left over from the old cabinet and writing desk... Although possessing a little imagination, you can build a real miracle from them and put them in the corner of the children's room to the delight of your baby.
You can make a slide for your child from an old desk.
For this you will need:
- lacquered cabinet door;
- plywood sheet;
- small boards, which can be pieces of a shovel handle, legs from a table or chair.
Manufacturing steps:
Making a slide of snow
Making a mountain with your own hands out of snow is very simple. The main thing is to wait until the temperature outside is close to about 0 ᵒС. And, of course, it is important to have a sufficient amount of snow.
And you will also need:
- a shovel made of metal or plastic;
- construction trowel, scraper;
- bucket or watering can;
- warm mittens.
Manufacturing steps:
- The primary task is to determine the location of such a homemade attraction. To minimize injuries, it is imperative to provide a roll-out onto a flat area so that
the child could roll evenly to a complete stop. - Determine the height of the slide based on the age of the riders. For crumbs up to 3 years old, an elevation of 1 meter in height will be enough, and for older children, you can build a higher slope, the main thing is that the prick of the slope does not exceed 40 degrees.
- Having rolled up several large balls, form the foundation of the future building from them. If you plan to make a high enough slide, then you should think about how the children will climb it. The problem can be solved by making the same snowballs that can be placed at the foot in the form of steps.
- Smooth the surface of the steps with a spatula and scrapers and leave the structure until the onset of cold weather.
- The slide should be poured in frost. It is not recommended to use buckets or a hose for this, as there is a high risk of large pits forming. Better to use a regular garden watering can or the one that housewives use to water houseplants.
- Slowly pour water onto the structure onto a piece of plywood or a shovel with a wide working part. Or you can cover the elevation with a large piece of cloth and pour through it - this will help the liquid to spread more evenly over the snow.
- If, in addition to the bucket, there was nothing at hand, then the water in it must be mixed with snow and this very gruel should be covered with the surface, leaving it to freeze overnight, and in the morning the procedure must be repeated.
- That's it, the slide is ready. If necessary, potholes on it can be trimmed with a spatula.
For construction we need: a couple of large shovels, a lot of water and a great mood. And also you cannot do in this business without frost, snow and several pairs of free hands.
Choosing a place for construction
First you need to determine the place for construction. It must necessarily be safe, that is, it is located away from plantings, buildings and other objects into which you can crash.
Determine the height, width and slope of the slide
The choice of height depends on the area where the slide is being built, taking into account the length of the slide. If you are building it for kids, the slope should not be steep, on the contrary, make it gentle. For adults, the optimal angle will be 40-50 degrees at the beginning of the mountain, and gradually decrease, making it more gentle.
We make steps and sides
Place the steps on the highest side of the mountain. Their width should be about 50 cm so that it is convenient to rise.
It will also be great if you make bumpers on the sides of the steps, 30 centimeters high. The same can be built along the edges of the slide itself, so that you can safely ride and not be afraid to fly out of it.
Sculpting a mountain
You need to start the construction after waiting for the thaw. It is when the snow is sticky that you can easily make a slide of snow. After that, the embankment must be well tamped.
Fill in
It is imperative to fill the slide in frost. This can be done from a hose or buckets. And the most The best way- an ordinary watering can. After climbing the steps, pour gently and slowly, trimming the surface to create a perfect even coverage... You can fill the slide with a large shovel or plywood, pouring water onto their surface, from which it will drain onto the snow. You can do this by covering the mountain with a huge rag - thanks to this method, the water will more evenly cover the mountain. Another way: collect snow in some container, mix with a stick and evenly cover the mountain with this gruel. Where water holes have formed, fill them with snow and fill them again.
Finishing touch
After the slide is filled, leave it alone until the ice freezes. Then pour in the same way a few more times, leaving the ice to freeze. Do this until the ice is perfectly flat and leave the slide overnight. During this time, your structure should freeze even more and you can try to ride. But before that, do not forget to shake the steps with sand, and spill the hill again with water and let it stand for another hour. Another nuance - be sure to make sure that the transition between the descent and the ground is smooth.
Slide Rides
You can swim down the slide on packages, bags, cardboard or rubber mats... But all these devices are not safe, because when descending on them, you can get injured, as well as frostbite or squeeze your hands. For a faster, more convenient, and most importantly safe descent from the ice slides, there are special equipment: ice sheets, tubing or cheesecakes.
Ice-cube is a special device for sliding downhill made of plastic in the shape of a heart. Such a plate is very light and convenient to take with you for walks, and you can control it with a handle.
Tubing or cheesecake - an inflatable ring, similar to a life buoy, inside which an inflatable chamber, and outside a protective cover bright color... It also has handles for the child to hold on to.
Outcome
Ice slide skiing is a well-known traditional pastime. Knowing all the nuances and rules, you can easily build such fun in your yard. A self-made ice slide can be the best gift for your beloved family for the New Year holidays.