The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 6, 2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)
Modeler of architectural details
§ 135. Modeler of architectural details of the 5th category
Job Description. Clay modeling of planar models with a simple ornament. Cutting out the necessary templates and making wooden formwork. Extrusion of plaster bases of planar models. Assembly of plaster planar models with a smooth surface, as well as planar models with a simple ornament. Plaster cutting of models of crackers, drops, beads and other similar small items. Carving on plaster models of a simple ornament. Cleaning flat and three-dimensional models with a smooth surface, as well as flat models with a simple ornament.
Must know: types of simple architectural details and their components; types of stucco ornament; properties of the materials used for the manufacture of models, and the requirements for their quality; the principle of operation of machines and devices for turning and drawing model parts.
§ 136. Modeler of architectural details of the 6th category
Job Description. Modeling from clay and plasticine of planar models with a complex ornament. Stretching, turning and cutting parts of three-dimensional models. Assembly of plaster models with complex ornaments, as well as three-dimensional models with simple ornaments. Carving on plaster models of complex ornaments. Cleaning of three-dimensional models with a complex ornament.
Must know: ways of constructing complex architectural details; methods of composition of complex stucco ornamentation.
§ 137. Modeler of architectural details of the 7th category
Job Description. Modeling of clay and plasticine three-dimensional models with a particularly complex ornament. Assembly of plaster models with a particularly complex ornament, as well as three-dimensional products with a complex ornament. Carving on plaster models of especially complex ornaments. Cleaning of three-dimensional models with a particularly complex ornament. Creation of molded ornament compositions.
Must know: ways of constructing particularly complex architectural details; methods of composition of a particularly complex stucco ornament.
Requires secondary vocational education.
The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 6, 2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)
Modeler of architectural details
§ 91. Modeler of architectural details of the 2nd category
Job Description. Cooking of glue and formoplast. Preparation of sculptural clay. Preparation of solutions, lubricants and paper-glue mass (papier-mâché) according to a given composition. Preparation of fittings, tow and shingles. Removal (without preservation) of stucco architectural details with cleaning of the bases.
Must know: types of basic materials used in the manufacture of models and stucco architectural details; methods for preparing glue, formoplast, sculptural clay and gypsum mortars.
§ 92. Modeler of architectural details of the 3rd category
Job Description. Making molds from plaster models for small flat stucco architectural details with a smooth surface or with a simple ornament. Making draft forms from clay or plasticine models and casting plaster models or their parts in these forms with the removal of molds. Production of plaster or cement lumpy forms. Production of adhesive or form-plastic elastic forms. Casting and beating of gypsum and cement flat small volumetric products, stucco architectural details with a smooth surface or with a simple ornament. Printing of small flat articles of paper-glue mass with a smooth surface or with a simple ornament. Installation of small flat products and stucco architectural details with a smooth surface or with a simple ornament. Removal of stucco architectural details of small sizes with a simple ornament, preserving them for casting molds. Stripping flat products and stucco architectural details with a simple ornament.
Must know: the main properties of the materials used; methods for the manufacture of gypsum or cement lumpy and form-plastic elastic forms; methods of preparing small clay models for the removal of draft forms from them; mold making methods.
§ 93. Modeler of architectural details of the 4th category
Job Description. Production of molds on plaster models for casting products and stucco architectural details. Installation of large flat products and stucco architectural details with a smooth surface or with a simple ornament, small - with an ornament of medium complexity or complex. Installation of volumetric products, small with a smooth surface or with a simple ornament and large with a smooth surface. Production of combined forms. Casting, beating and stuffing of products and stucco architectural details of all kinds. Finishing products of all kinds. Removal of stucco architectural details with complex ornaments or bulky ones, while preserving them for casting molds.
Must know: arrangement of combined molds made of gypsum and glue, gypsum and molded plastic, gypsum and wood; requirements for the quality of products and stucco architectural details; ways of preparing large clay models for taking draft forms from them.
§ 94. Modeler of architectural details of the 5th category
Job Description. Making draft forms from clay and plasticine models, casting plaster models or their parts in draft forms. Production of gypsum lumpy, combined and elastic forms. Installation of manufactured stucco products.
Must know: marking methods used for complex decoration of premises and facades with stucco products.
Note. Small flat products include: overhead letters up to 500 mm high, wreaths up to 500 mm in diameter, ventilation grilles up to 0.5 m2 in area, coats of arms up to 500 mm high, garlands up to 750 mm long (along the bend), cartouches with a maximum dimension up to 500 mm , sheets up to 750 mm long, mask-locks up to 500 mm high, linear products (smooth - the sum of height and offset, embossed - height, convex - height along the bend) up to 500 mm, rosettes (round - diameter, elliptical - half the sum of the main axes , rhombic - half the sum of diagonals) up to 500 mm, triglyphs up to 750 mm high, round emblems up to 500 mm in diameter, portal emblems up to 0.5 m2.
Small volumetric products include: vases up to 250 mm high (without a plate), balusters up to 750 mm high, vases with the largest dimension up to 500 mm, capitals up to 250 mm high, piece drops up to 500 mm high, brackets with the largest dimension up to 500 mm, modulions with the largest dimension up to 500 mm, handrails up to 1000 mm long, piece crackers up to 500 mm high, bowstrings up to 1000 mm long, cones up to 500 mm high.
Items larger than those indicated above are considered large.
Training a working profession as a modeler of architectural details in Moscow guarantees a demand for a specialist in the labor market, moreover, over the past years, the Russian economy has experienced a clear lack of qualified technical specialists. You can get this profession in 3-16 weeks in our training center, where, after completing the classes, a ready-made specialist will receive knowledge and a certificate that will significantly raise his status in the eyes of the employer.
Course Information
Find out the terms and cost of training or call 8 800 555-93-71 (toll-free in Russia)What does the training include
Teaching a working profession involves the study of theoretical material, as well as the acquisition of practical skills through the performance of tasks and analysis of situations related to further work.
Important point! A qualified specialist must understand all the nuances of the technological process, be able to use modern equipment, and apply different techniques for solving production problems.
Certificate sample
ETKS (Unified Tariff and Qualification Directory of Works and Professions of Workers)
Important point! Depending on the category assigned to the student, the timing of theoretical and practical classes may vary.
The training program Modeler of architectural details covers the following issues of a theoretical and practical nature:
Select category
Training course modeler of architectural details 5th category
Characteristics of works.
Clay modeling of planar models with a simple ornament. Cutting out the necessary templates and making wooden formwork. Extrusion of plaster bases of planar models. Assembly of plaster planar models with a smooth surface, as well as planar models with a simple ornament. Plaster cutting of models of crackers, drops, beads and other similar small items. Carving on plaster models of a simple ornament. Cleaning flat and three-dimensional models with a smooth surface, as well as flat models with a simple ornament.Must know:
types of simple architectural details and their components; types of stucco ornament; properties of the materials used for the manufacture of models, and the requirements for their quality; the principle of operation of machines and devices for turning and drawing model parts.Sign up for a course (5th grade)
Training course modeler of architectural details 6th category
Characteristics of works.
Modeling from clay and plasticine of planar models with a complex ornament. Stretching, turning and cutting parts of three-dimensional models. Assembly of plaster models with complex ornaments, as well as three-dimensional models with simple ornaments. Carving on plaster models of complex ornaments. Cleaning of three-dimensional models with a complex ornament.Must know:
ways of constructing complex architectural details; methods of composition of complex stucco ornamentation.Sign up for a course (6th category)
Training course modeler of architectural details 7th category
Characteristics of works.
Modeling of clay and plasticine three-dimensional models with a particularly complex ornament. Assembly of plaster models with a particularly complex ornament, as well as three-dimensional products with a complex ornament. Carving on plaster models of especially complex ornaments. Cleaning of three-dimensional models with a particularly complex ornament. Creation of molded ornament compositions.Must know:
ways of constructing particularly complex architectural details; methods of composition of a particularly complex stucco ornament.Requires secondary vocational education.
Sign up for a course (7th category)
Who is vocational training aimed at?
Applicants who meet the following requirements can get a useful, and most importantly, a working profession in demand in the labor market in Moscow:- age from 18 years; the state of health corresponding to the profession; the presence of a certain qualification (when assigning categories of the highest level).
Required documents
In order to enter courses for the development of a working profession, it is important to take care of the preparation of such documents :- copy of the passport; (passport data)
a copy of the document on education (secondary, secondary special, higher);
medical certificate depending on the chosen profession (not always required);
listener's request
If an organization sends a trainee to the profession "Modeler of architectural details" for training, then a card with its details is attached to the package of papers.
What are the benefits of vocational training?
We provide training for workers in the profession Modeler of architectural details by assigning ranks in Moscow, as a result of which they can carry out full-fledged labor activities within the framework of the chosen profile, and if they are assigned higher ranks, they can count on an increase in salary. At the same time, we guarantee:complex classes taking into account all qualification requirements;
flexible class schedule;
strict consideration of the requirements of the Ministry of Labor of the Russian Federation, the Ministry of Health of the Russian Federation and the Ministry of Education of the Russian Federation.
Stages of training for a working profession
Before enrolling in the course, you must complete the following steps:Important point!After passing the final test, course participants receive a certificate certifying their qualifications with an indication of the category. Teaching a working profession is a way to gain a sought-after qualification in a short time, improve your rank, and activate the interest of employers. Attending courses for the assignment of the next category is considered as an advanced training.
What does Job Training look like? Sample.
Other Programs: Job Training
| The code | Name | Clock | |
|---|---|---|---|
| Machine operator for drilling wells, driving and piling | Get trained | ||
| Electrician-adjuster | Get trained | ||
A modeler of architectural details is a worker who performs work on the manufacture of stucco architectural details and three-dimensional products, installs these parts, repairs them, sculpts flat models with simple ornaments, carves ornaments on models, makes parts of three-dimensional models.
Depending on the category, the modeler of architectural details can perform simple or more complex work:
- Clay modeling of planar models with a simple ornament. Cutting out the necessary templates and making wooden formwork. Extrusion of plaster bases of planar models. Assembly of plaster planar models with a smooth surface, as well as planar models with a simple ornament. Plaster cutting of models of crackers, drops, beads and other similar small items. Carving on plaster models of a simple ornament. Cleaning flat and three-dimensional models with a smooth surface, as well as flat models with a simple ornament.
- Modeling from clay and plasticine of planar models with a complex ornament. Stretching, turning and cutting parts of three-dimensional models. Assembly of plaster models with complex ornaments, as well as three-dimensional models with simple ornaments. Carving on plaster models of complex ornaments. Cleaning of three-dimensional models with a complex ornament.
- Modeling of clay and plasticine three-dimensional models with a particularly complex ornament. Assembly of plaster models with a particularly complex ornament, as well as three-dimensional products with a complex ornament. Carving on plaster models of especially complex ornaments. Cleaning of three-dimensional models with a particularly complex ornament. Creation of molded ornament compositions.
1. What is the name of your profession (position)?
My profession is called a sculptor.
2. What is your job and what are your responsibilities?
I am engaged in the manufacture of stucco decoration by casting into molds or by broaching. Stucco decor is widely used in the decoration of apartments, offices, cafes, restaurants, hotel complexes.
These are bas-reliefs, and columns, and ceiling rosettes, and balusters, and cornices, and consoles, and other architectural extravagances. It should be noted that stucco never goes out of fashion, products change over time, but always enjoy popularity.
The casting method is that the gypsum mortar is poured into soft silicone or polyurethane molds, then it is shaken and after 15-20 minutes the finished product is removed. The broach method is used in the manufacture of ceiling cornices, column bodies and pilasters, moldings. Here, the gypsum mortar is evenly distributed on a large table, and with the help of a special device, the product is pulled.
3. What education is required to get your position?
To work, you need to get a secondary education, preferably a secondary specialized construction education.
4. Describe your working day.
My working day begins with the preparation of casting molds. The necessary forms are put on the table, processed with a special compound. Then a gypsum mortar is kneaded with the addition of pigments, and this solution is poured into molds. When the gypsum hardens (after 15 minutes), the finished products (panels, rosettes, cornices) are removed from the mold, cleaned of defects and transferred to the dryer.
5. How comfortable are your working conditions (all day outside, or in the office with a cup of coffee)?
The whole process takes place in the workshop.
6. What do you like most about your business?
I like my work because it is creative. The same cast parts can be used to create different products.
7. What do you dislike most about your job?
I do not like doing a large amount of monotonous and monotonous work, but sometimes I have to.
8. If it's not a secret, what is your salary level (is it enough to write whether you are satisfied or not)?
Work is piece work. If you want to earn more, work harder. The salary level is adequate to the invested work.
9. Describe your team, what kind of people work with you?
Everyone in the team has a construction specialty. All people are creative.
10. What human qualities do you think are most important in your business?
In this case, it is important to be careful and efficient.
11. Work gives me additional opportunities (here everything that gives you work except money, from self-expression and communication with interesting people to the opportunity to visit different countries).
In addition to working in the workshop, I have the opportunity to travel to objects for the installation of stucco moldings.
12. Do you have the opportunity to evaluate your work on a five-point scale, what grade would you give?
I rate my work 5 out of 5.
13. Why did you choose this job?
I chose this particular job because my whole family is engaged in stucco decoration.
14. What are the opportunities for your career growth?
There are always opportunities for career growth - having such a profession, you can always open your own small stucco workshop and turn the profession into a small business.