Often pipes, counters, a sanitary boiler spoil the overall look of a bathroom or toilet. You can decorate your bathroom in a variety of ways. You can beautifully remove the technical unit with your own hands by choosing the right way.
A sewer riser, water heater or bathroom meter has nothing to do with the aesthetics of the room. That's why so many people want it. You can do it, but it's important to know how to do it right.
Ways to mask the riser in the bathroom:
- Construction of a false wall;
- Use of plastic panels;
- roller shutters;
- Plasterboard or plastic box;
- Household locker.
False wall is considered the most drastic way to sew up the back with pipes. The material for the wall will be plywood or chipboard. Often the wall can be sheathed with drywall. Before work, pipes should be prepared, rust removed and painted. For the frame, galvanized profiles are used. They are attached to the floor and wall. The material is attached to the frame with self-tapping screws.
For a separate toilet, you can close up a wooden frame instead of galvanized.
Often, plastic panels are used for the bathroom. They have a number of advantages: resistance to moisture, strength, lightness, low cost. At the same time, the installation of the material is simple and does not require additional painting. The panels have an air chamber, which makes the material soundproof.
An easier way is to use roller shutters. They are installed and operated like ordinary blinds. At the same time, new developments provide options with sound insulation or heat saving.
The box is made from a metal profile, which is sheathed with plastic. It can be removed, which is very convenient. The box has an inspection window. We hide the hatch under the tile. This is a kind of window for access to pipes. An excellent option is considered a utility closet. So you can not only hide the pipes, but also get a place to store household chemicals.
Options: how to make a pipe box in a drywall toilet
The location of the pipes also determines the masking option. So you can hide the entire wall or place with communications. The first skin is considered more aesthetic. The box is mounted in two ways. The first involves the use of a framework. This gives strength to the skin. The second option is frameless.
Before work, you should make a plan of the room with the location of all pipes. You will need to calculate the amount of material and prepare the necessary tools.
For the bathroom, it is better to use moisture-resistant drywall. It is resistant to the appearance of fungus, environmentally friendly, guarantees sound insulation. The material can be used for both horizontal and vertical communications.
Making a drywall box:
- It is required to retreat 2 cm from the counter and pipe and draw vertical lines on both sides. Then fix the profile.
- We attach drywall sheets.
- Joints should be puttied and hidden with a decorative plinth. The surface should be painted over.
Other material is also widely used for the box. So the lining is made of plastic. Expanded polystyrene has many advantages, it is considered to be an ideal option for the bathroom.
How to close the pipes in the toilet with plastic panels
First you need to prepare the frame. First, measurements are taken. It should be borne in mind that in addition to sewerage, there are also water pipes in the toilet. With the help of a tape measure, all manipulations with measurements are performed. On the created plan, all fasteners and the main elements of the skin should be indicated.
Before masking the pipes, you should check their condition. If necessary, communications are replaced.
Then the frame is attached to the surfaces. Wooden slats or a profile should be screwed to the lower and upper parts. Then they are mounted every 30-40 cm. Frames with doors should be located on the frame. They should be fixed at the end of the base.
How far should the toilet be from the wall? Look for the answer on the following page:
Stages of sheathing the frame with plastic panels:
- Closing begins with the starting molding. The element is attached to the frame with self-tapping screws. To hide the heads of the fasteners, the self-tapping screw must pass through the shelf that the next panel overlaps.
- Next, lay the next panels, placing them in the grooves. The free end of the panel is fixed with a self-tapping screw. This is how all panels are installed.
- Doors are installed in the wall.
- A molding is also mounted on the opposite side. All joints are processed in the same way. Ventilation must be provided in the box.
Fasteners can be not only self-tapping screws. Cleimers, clips, glue are widely used. The main thing is that it is fashionable to remove the mount if necessary.
Creating a toilet door behind the toilet: simple and useful
A simple option on how to sew up pipes in a toilet: stylish blinds
With the help of blinds, you can quickly and easily hide an unwanted technological unit. This is an aesthetic choice. Blinds have many positive aspects.
Benefits of using blinds:
- Installation is simple, easy to do yourself;
- Do not take up much space, suitable for small rooms;
- Provide free access to pipes;
- A wide range of different options;
- Simple repair.
Pleased with the durability of the material and affordable cost. For the bathroom and toilet, aluminum or plastic blinds are ideal. Wooden curtains are not suitable for rooms with high humidity.
Also for the bath and toilet use plumbing blinds. This is a stylish and neat option. Often on the market you can find blinds with photo printing. At the same time, a niche is created inside where it is convenient to store household items.
Ways to close the pipes in the toilet (video)
Decorating plumbing in the bathroom is considered a particularly scrupulous task, especially in Khrushchev, where there is little space. The disguise may vary. Termination can be done using a false wall, PVC panels, blinds or a cabinet with shelves inside and free access to communications. Decorative materials are also varied. The use of plastic, drywall, fiberboard is very popular.
Repair in the toilet is a task that all owners face sooner or later. One of the components of this task is the masking of sewer outlets, because the pipes sticking out of all places look rather unpleasant. How to close the sewer pipe in the toilet will be discussed in this article.
When working, it is worth considering the features of the bathroom and sewer system. For example, a bathroom can be combined or separate. In the case of a separate location of the toilet, the sewer riser is located in this particular room, and the type of connected pipes cannot be called aesthetically attractive.
The cast-iron structure, installed several decades ago, looks even worse - rust, peeling paint and numerous chips do not allow us to talk about good visual qualities. To avoid these problems, sewer pipes must be closed by one of the methods that will be discussed later.
The choice of materials for masking pipes
In order to securely hide sewer pipes, it is necessary to select materials with skill - this will depend on the efficiency and visual qualities of the future design.
The following requirements are imposed on materials for masking sewer pipes:
- It is important that the materials used are harmless to human health and do not emit hazardous substances during temperature and atmospheric changes;
- Pipes can be masked with materials that are highly resistant to corrosion and its consequences;
- All materials should be compact and light enough so that the final design does not take up much space in an already small room.
Several materials meet these requirements, the most common of which are the following:
- Plastic;
- Moisture resistant plywood;
- Moisture resistant drywall.
It is advisable to take into account the interior of the room in the process of selecting materials for hiding pipes, so that there is no dissonance between the hiding box and other finishing elements.
Marking the masking box
Of course, before you close the pipes in the toilet, you need to know what kind of material will be used for these purposes. The next step is to take measurements in the room in order to choose the design of the box.
For measurements, you will need any suitable tool - a tape measure, a level, or something similar. When all dimensions are known, it is worth displaying the room on paper on a scale to simplify the layout of the future masking box.
Also, when designing, it is worth considering the need to provide access to valves and meters. The traditional solution to this problem is closing doors or hatches, which are very easily integrated into the design of the box to hide sewer pipes.
Masking pipes with plastic panels
You can hide the pipes in the toilet using plastic panels, the design of which has many advantages:
- Simple installation that does not require a lot of time;
- Light weight, which further simplifies the installation process, and the possibility of easy dismantling;
- Hygiene, especially important when used in a bathroom, and moisture resistance, which increases the life of the structure;
- Good aesthetic qualities, allowing you to choose the best option that matches the overall style of the interior;
- Low cost and durability of this material.
Before sheathing the pipes in the toilet with plastic panels, you need to assemble a set of tools and materials necessary to create a masking box:
- plastic panels;
- Profiles required for installing panels;
- Start profile;
- Various fasteners (self-tapping screws, screws or dowels);
- Perforator;
- Mounting knife;
- Screwdriver and screwdriver;
- Roulette and building level.
You can install plastic panels according to two schemes:
- The wall, near which the sewer pipes pass, is completely covered with panels. If we close the pipes in the toilet with drywall, then we can achieve a harmonious appearance of the structure, but we will have to pay for it with free space. See also: "".
- The second scheme involves the masking of the pipes themselves, for which they are closed with a box. This method is much more profitable in terms of material consumption and space saving, but the resulting design will not look the best.
Closing the pipes in the toilet looks like this:
- First, markings are created on the walls, along which the guides will be fixed;
- Guide profiles are installed according to the markup and provide a perimeter for installing panels;
- The profiles are fastened to the wall using a perforator and dowels, located in increments of 30-40 cm;
- Plastic panels are attached with self-tapping screws to the rails.
Masking pipes with drywall
A toilet pipe box made from drywall is often the final choice. This is due to the fact that drywall is very well suited for subsequent finishing - it can be painted, wallpaper or tile glued over it.
However, there is also a drawback, and it lies in the slightly greater complexity of arranging a drywall box. The process itself strongly resembles the installation of a plastic box - first everything is measured, then guides are installed to which panels cut from drywall sheets will be attached.
When closing the sewer pipes in the toilet with drywall, you should use the following recommendations:
- When designing a structure, you need to remember the need to create inspection hatches;
- When screwing in self-tapping screws or other fasteners, you must be careful not to accidentally touch the pipeline;
- The masking box should be located in such a way that the use of the toilet is extremely comfortable;
- To minimize the noise coming from the sewer pipes, you can use soundproofing material when creating the box.
Alternative options for masking sewer pipes
In addition to the methods of masking the pipeline described in the article, which are the most common, you can equip a different design. A fairly simple option is a primitive removable box made of plywood sheets - it will take a little effort, and the final result will be quite digestible and functional.
If you wish, you can be creative to hide the pipes so that the whole thing looks like a work of art (read: ""). For example, you can paste over a sewer riser with mosaics, the color and texture of which will match the main decoration of the room, thereby emphasizing it.
However, you need to be more careful with such decisions - the sewerage must first of all fulfill its immediate duties, and only then everything else. That is why you should first make sure that the system is reliable, and only after that think about options for finishing it.
Conclusion
The choice of the optimal solution is always individual and depends on many variables. This article provides information that can be used to properly hide the sewer pipes in the toilet.
Hidden pipes in the toilet - a necessity or a tribute to the construction fashion?
An unambiguous answer cannot be given. On the one hand, the absence of open pipelines is a more aesthetic appearance of the room, increased sound insulation and, finally, a higher degree of hygiene. On the other hand, difficult access for taking readings from water meters or carrying out repairs.
Modern technologies help to formulate such an answer: "Hidden pipes are a necessary tribute to the building fashion."
There is a very common opinion that it does not make sense to “mask” the pipelines in the toilet until the pipes are completely replaced with plastic or metal-plastic. However, this is not quite true. Firstly, hidden pipelines will significantly improve the visual perception of the room.
Secondly, they will greatly facilitate the process of cleaning the toilet, especially capital. And thirdly, the use of components such as plastic, the role of shutters or blinds will allow you to quickly dismantle the shelter structure or simply provide unhindered access to the pipes.
Existing plumbing and sewer products made of plastic theoretically allow them to be buried forever in the thickness of the walls. But this option is suitable for linear sections of water-bearing communications.
Access to water metering units, shut-off valves and revisions is required. And preferably comfortable. The ergonomics of such access is equally dependent on both plumbers and installers hiding pipes.
The designs of systems for concealing pipelines in the toilet can be divided into four subgroups:
- Frame. These include structures assembled on a metal frame, or wooden slats and timber. Further cladding is made with GKL, PVC panels or DSP boards.
- Mounted. They are made-to-measure roller shutters or horizontal blinds fixed to the ceiling.
- Combined. In this case, part of the protection is assembled on a frame, and part is a lifting system in the form of roller shutters or blinds.
- Finished construction. This is usually a one-piece array, mounted as an assembly. A typical example is a metal-plastic frame with a window for access to the water meter assembly. Filling - sandwich panel.
Frame types of pipe shelters differ in the form of assembly and types of finishing.
Forms of installation of frame systems for "masking" pipelines
- Solid barrier. It is a wall, assembled along the far or side walls of the toilet room. A distinctive feature of such a false panel from a conventional partition is the presence of a frame sheathing only from the visible part. An undoubted advantage of this design will be the possibility of the same type of finishing of the entire toilet - plastic panels, ceramic tiles, washable wallpaper, fiberboard panels, etc. The disadvantages are the impossibility of carrying out plumbing work behind a false wall and a rather significant decrease in the total area of \u200b\u200bthe toilet. Basically, the footage is compressed due to the unsuccessful location of pipelines, mainly sewer risers. As a result, you have to change the location of the toilet bowl - push it to the front door or move it to the side.
- Corner partition. The principle of the device of an oblique false wall is the same as that of a solid partition. Only it does not close the wall, but the place where the walls of the room meet. Behind the corner structure it is convenient to place pipelines located in the corner. Ideal when the back of the frame touches the pipes farthest from the walls of the toilet room. However, if the sewer riser and plumbing are mounted at some distance from the corner of the toilet, then an oblique false wall can take up an unreasonably large area. In addition, uneven inner corners can significantly complicate the interior decoration of the toilet room. This can be especially true when lining walls with PVC panels.
- Rectangular box. They are used to "mask" both vertical risers and horizontal sections of pipelines. The frame is mounted close to the existing pipes. Unlike false walls that completely cover a wall or corner, boxes cover only segments of the wall space. The horizontal sections sewn in this way can be used as shelves. Some difficulties can be caused by sewing hot water risers with heated towel rails. This is due to the features of the possible replacement of the heating device.
- Multilevel boxes. This is a kind of symbiosis of walls, false panels and boxes. The boxes perform the function of "protection" of pipelines. They are mounted close to the pipes, and at the same time, as far as possible from the plane of the walls. The design in rectangular reflection repeats the relief of the indentation of pipelines from walls or false panels. Such stepped boxes save usable area as much as possible. An interesting option is to create multi-level structures with niches. The back side of the recess is the existing walls, the protruding plane is the outer part of the boxes. But such systems are relevant for toilet rooms of rather large dimensions. Frame facing material - plastic or drywall.
Hinged systems for concealing pipelines
- Blinds. This "disguise" is more of a decorative character. But it will absolutely not interfere with the repair work. The installation location is often limited to the rear wall of the toilet room. With a lateral arrangement of pipes relative to the entrance, the installation of blinds simply does not make sense. Cross plates made of aluminum are preferable to plastic lamellas. Standard powder-coated colors allow you to visually connect the blinds with the materials of the toilet room wall decoration without transitions that cut your eyes.
- Roller shutters. Roleta quite organically fit into the interior of the toilet room. Are made only under the order. There are no standard sizes. Separate roller shutters usually close the rear wall of the toilet. When mounting on the side, you can not do without boxes assembled from drywall. In this case, the issue of the device of the revision hatch is eliminated. If the size of the installed shutters corresponds to the dimensions of the linear projection of the pipelines, then no problems are expected during plumbing work.
Sound insulation of pipelines behind the boxes
This event is relevant only for multi-apartment high-rise buildings. The noise of the "waterfall", coming from behind decorative boxes and false panels in the toilet, rarely brings joyful feelings. Especially such discomfort is created by sewer risers.
Mineral wool will help solve this problem. Moreover, it is necessary to isolate not the plane of the partition, but the pipelines. Noise from pipes wrapped with glass wool becomes an order of magnitude lower.
Installation of duct frames and false walls
- Metal carcass. It is made at the installation site from metal profile pipes by welding. The main frame is attached to the walls, floor and ceiling with anchors. The thickness of the metal is not more than 1.5 mm, which will make it possible to fasten the skin with ordinary self-tapping screws with a drill. Cladding material - DSP boards. Such a powerful design is designed to hang and hold heavy pieces of furniture or equipment on it. Typical examples are a cabinet for storing preservation for the winter or an electric water heater with a capacity of 100 liters or more. The complexity of the installation work and the cost of materials make such a frame a rather expensive structure.
- Frame made of CD and UD profiles for drywall systems. The very name of the materials for the manufacture of the structure says that it is intended for gypsum boards. But, in addition to drywall sheets for sheathing, PVC panels can be used. For drywall, the usual installation scheme is used - a grid with a mesh size of 600 by 600 mm. But plastic will require horizontal fastening of CD-slats every 500 mm. GKL is fastened with self-tapping screws for metal, plastic - with a press washer. The biggest plus of this design is the speed and accuracy of installation.
- Frame made of wooden beams and slats. The most economical version of the frame "camouflage". PVC panels, drywall, fiberboard, and OSB boards can serve as cladding material. But the cheapest is almost always not the best. A structure assembled from wood in rooms with high humidity is very susceptible to the risk of deformation. Therefore, further tiling cannot be carried out. And the rest of the materials on curved racks will lose all attractiveness.
Materials for sheathing systems for covering pipelines
Building components for frame cladding are divided into two categories:
- Materials suitable for use immediately after installation work. These include:
- PVC panels. Lightweight and beautiful material that has proven itself when decorating rooms with high humidity. Seamless versions of plastic panels give the impression of solidity of the assembled planes. Plastic is very easy to work with. An extensive range of colors and a variety of textures of products can satisfy the most picky tastes. The disadvantage is excessive fragility.
- Chipboard boards. Such a furniture component gives a certain comfort to the toilet room. Especially if the finish of the box is made in the same style as the front door. In addition, laminated chipboards can be mounted as part of a wall cabinet with opening or sliding doors. It is quite appropriate to use mirrors. The downside is the high cost of the project.
- Wooden lining. Wood is always in fashion. But it is very difficult to harmoniously combine wooden parts with tiles or plastic. But to completely sheathe the toilet room with clapboard may not allow the area of \u200b\u200bthe room.
- Sheet materials are the basis of future finishing.
- CSP boards. Reliable, but very heavy material, even if you use sheets with a thickness of 8 mm. Cut to size with an angle grinder. Absolutely not afraid of water. Particular difficulties may arise when constructing an inspection hatch.
- Plasterboard sheets. For sheathing the shelter frames, it is recommended to use moisture-resistant wall plasterboard with a thickness of 12.5 mm. Drywall has proven itself in the construction market. Very easy to process. Does not lose its properties under various finishing materials - primers, putties, decorative plasters and ceramic tiles. The main drawback loses its structure under the influence of water. Well, cases of flooding of bathrooms in multi-storey buildings are well known.
Finishing boxes
There are several options for finishing the finishing touches in the process of covering the pipes in the toilet. Here are the most common ones:
- Ceramic tile. An old and yet modern way of finishing fragments of toilet rooms. A solid "experience of operation" of tiles is the best argument in favor of ceramics. The advantages are visible to the naked eye - ergonomics, durability, aesthetics, etc. etc. In the case of boxes, there is only one technical difficulty - the device of an inspection hatch, which looked organic and would be functionally convenient.
- Textured plaster. The embossed surface of such a decorative coating may require more frequent and thorough maintenance of the raised panels. But there is a big plus - the plasterer is devoid of linear dimensions and quite easily hides minor installation errors.
- Use as a screen to "mask" the remnants of cabinet furniture. Any used chipboard (wardrobe wall, countertop) will perform the same role as custom-made ones.
- Temporary false walls can be fastened to ordinary mounting foam. The false panels do not bear special loads, therefore, the main thing is to fix them during the foam solidification.
- The role of the inspection door can be successfully performed by a removable ventilation grille.
When renovating hygiene and toilet rooms, many prefer to close pipes that spoil the view. This is how you can add aesthetics, beauty and attractiveness to the room. It is worth noting that sometimes it is much easier to finish the walls and floor than to sew up the back wall with pipes. There are many ways to mask the bathroom and toilet from pipes, and each has its own characteristics and disadvantages.
The most popular way to hide a sewer pipe is to sew it up with plastic panels. The only drawback is that the masking with plastic panels stands out significantly from other walls, but you can fix the drawback if you completely finish the bath with plastic.
This option has a number of advantages:
- Ease of installation;
- Safety for human health;
- It is possible to get close to the pipes in case of an accident or simply to inspect the integrity and suitability for operation;
- Long service life;
- Ability to quickly dismantle if necessary.
The disadvantage of the box also lies in the fact that the design is too voluminous and in an emergency it is not too easy to get to the pipes. The principle by which a box is installed for closing sewer pipes is the same, and you should not be afraid of such upcoming work and contact a specialist for large sums of money. Spending will be completely thoughtless, since it is possible to do everything with your own hands.
What material is better to use to sheathe pipes on the back wall with your own hands? There are many options, however, the choice must be made by choosing according to the design decision, the area of \u200b\u200bspace for which sheathing is required and the budget.
Before you close up the niche and hide the pipes, you need to take a number of important steps that are essential to prevent serious consequences:
- It is necessary to replace the pipes with new ones;
- Defects need to be fixed;
- Be sure to check all tees, couplings and taps for leaks.
If you want to decorate a niche and save a lot, you should give preference to products such as blinds or a plastic curtain, however, the cheapest option is a drywall box. It is advisable to choose plastic pipes. They have a long service life, and practice shows that there are practically no problems with them, such as leaks and breakthroughs.
The principle of assembling a box for pipes in a toilet
How beautiful to hide the pipes in the bathroom? It is necessary to choose not only the material, but also to decide how the stitching will be carried out. It is important to note that not even an experienced craftsman can make such a plumbing decor, and for the construction it will be necessary to prepare a metal profile, a wooden beam and material to close the communication.
When closing pipes with a box, you can use canvases such as:
- Waterproof plywood;
- Sheet of waterproof GKL;
- Plastic panel.
If we cover it with a sheet of drywall, then it is required to decorate it, and you can decorate it with tiles. In order not to violate the integrity of the interior and design ideas, it is best to choose exactly the GKL sheet and tiles. This is how the room will be completely in one form and there will be no places that stand out against the background of the rest of the room.
If the termination requires too much effort and time, which simply do not exist, then you can always order the manufacture of such a box or purchase a ready-made one. At a cost, these methods are much more expensive, but can be better. You can block the pipes with a box, with a different configuration. False wall. This option of the box is suitable if the room is decorated with too small dimensions. When installing a false wall, many people prefer to change the usual stationary toilet to a hanging-type equipment with installation.
A square-type box is perfect for decorating pipes located in one part of the room. Be sure to make a window for tracking data on the counters. An oblique false wall lies in the fact that it is installed at an acute angle relative to the back or side walls. Using this option, it is possible to close thinner pipes extending from the main part of the riser.
It would be inappropriate to install a large box here, since it is easier to make a small bevel.
The multi-level box is suitable for those rooms in which pipes have to be fenced off into the space of the room. In other words, when they are sewn up, a kind of small wall is constructed, which can divide the area of \u200b\u200bthe toilet and bath, if they are combined. In general, the process of creating a box consists in mounting a metal profile, installing reinforcements from a bar, and also building up a sheathing material.
Before carrying out all the above works, you need to create a project, make markings on the wall, and only then install the guide profiles. To install the profile, use fasteners in the form of dowel-nails, mounted using a perforator.
Do I need a box in a drywall toilet with shelves
Finishing PVC pipes or just ordinary cast iron pipes in the toilet is carried out in order to hide them from prying eyes, significantly improve the aesthetics of the room and get another flat surface that can be decorated with shelves or any other accessories. The easiest way to sew up pipes in a toilet or bathroom is to install a drywall box.
This method has a number of advantages that cannot be ignored:
- Installing the canvas is not difficult;
- If necessary, it can be easily dismantled;
- For the construction of the structure, you do not need to use super skill skills;
- The material is completely safe for human health, even with strong heating;
- The canvas does not emit toxic substances;
- It is the GKL canvas that is great for subsequent decoration with plastic panels, tiles and other materials.
It is worth paying attention to the fact that drywall has a drawback and this is that if you need to remove the box to repair or replace pipes, then it must be completely dismantled. Drywall itself has a number of advantages, which only increases the demand for it when installing the box in the toilet - a long service life, optimal cost, availability.
It is easy to cut and for this you need to use a regular or clerical knife.
If the material is impregnated with an additional soil composition, then its properties will be improved. The canvas has a soundproof property. If you purchase a moisture-resistant coating, then you can not worry about the formation of problems such as mold, fungus and similar consequences. As for the shelves, whether to install them or not depends only on personal preferences, since if the room is too narrow, then additional shelves can help remove excess furniture from the room, for example, a wardrobe on which the door takes up a lot of space when opened, and thereby release the quadrature.
Blinds and a box in the toilet or how to fix pipes
As already noted, there are various ways to sew up pipes in a toilet, and blinds are one of the newest. Thus, it is possible to emphasize the presence of aesthetic taste among the owners of the house and at the same time make the toilet more beautiful and stylish. Blinds are a great option for a small room, and also one of the cheapest.
Blinds can:
- Save square footage;
- Quickly disguise the back wall;
- Inspect pipes, if necessary;
- Install shelves in a niche and have constant access to them.
Blinds have their drawback, and it lies in the minimum period of preservation of the proper form. As a rule, they quickly turn yellow and darken. It is better to choose blinds in which you can easily replace their chassis or, in other words, the curtain. If you purchase a ready-made box, then there will be no problems, and you only need to install the structure in its rightful place. However, not every feature of the toilet allows you to install such products, and therefore you need to first familiarize yourself with the configuration of the room and all the possibilities.
Methods: how to close the pipes in the toilet (video)
If you correctly form the project, take into account the nuances in it, and at the same time select only high-quality materials, then you can make a simple and stylish finish for the toilet, through which sewer pipes will be hidden.
When carrying out repairs in the bathroom, you inevitably have to deal with open pipes that you would like to beautifully close. In this article, we will tell you how to hide pipes in the toilet using plastic panels and blinds, and also show photos of interesting solutions.
Preparatory work
The photo and video at the end of the article show the end results of masking the plumbing, as well as detailed workflow sequences. But before you start hiding pipes, you need to remember the following important preparatory points:
- Communications must be masked in such a way that, if necessary, they have access. After all, it happens that the occurrence of an emergency situation leads to additional troubles and expenses, for example, it is necessary to break a wall or partition.
- Before installation, sewer and water pipes should be carefully checked so that no leaks occur during operation.
- All connections must be tight.
- Each transitional element of the pipeline (coupling, angle, tee) responsible for hot water supply must be made of the same material as the pipe itself. Then the heating of individual elements of the pipeline will be accompanied by the same expansion, which will prevent the occurrence of unpleasant consequences.
- It is better to use connecting elements to a minimum, then breakdowns will occur less frequently.
Possible ways to mask pipes
To get rid of the unsightly appearance of sewer and water pipes, you can use one of the following methods:
Installation of a decorative box. With the help of such a structure, you can not only hide the required number of pipes, but also acquire functional shelves for various jars, tubes or bottles. In order not to turn a minor leak into a real flood, you need to rationally approach the aesthetic design. The decorative box should be made only from materials that can be easily dismantled (drywall, plywood, etc.). And if the box is equipped with a door, then dismantling may not be required.
Making a locker for a sewer pipe. The use of this masking method allows you to save both space in the toilet and the money that would have to be spent on a cabinet under the washbasin. In addition, meters, filters and other equipment remain available throughout the life of the system. When hanging shelves, special attention should be paid to the fasteners used, because in the future they must withstand not only the shelves themselves, but also everything that will be installed on them over time.
The use of roller shutters is the easiest and fastest way to mask the pipes in the toilet with your own hands. Outwardly, such a niche will look very neat and attractive, and the roller shutters themselves are very easy to operate. The use of this option is especially advantageous if masking of the boiler is required, since this device cannot be completely covered with a solid partition. Access to temperature sensors may be required at any time, and a rising roller shutter can fully satisfy this need.
The use of plastic panels for niche finishing. Such a material imitates a coating for the manufacture of which ceramic tiles, stone or natural wood were used. In addition, installation work does not take much time and does not require any special knowledge, and the operational characteristics of such panels suggest their use in high humidity conditions. Just before starting work, you should take care of the presence of a wooden frame to which each plastic panel will be attached.
In addition, you can experiment with ceramic tiles, which are also often used to mask the sewer system. For example, you can install a drywall partition on an aluminum frame, while leaving the window necessary to provide access to the pipes. Then close this window with a special screen or a small tiled door. The presence of such a hatch will not have any negative impact on the interior of the bathroom, but will provide access to all communications.
The choice of the right pipe masking option depends on many factors, but you always need to monitor how well and correctly the installation is done, since in a toilet that usually has a small area, it is quite difficult to carry out this kind of work.
The right decision, together with quality work, will lead to obtaining not only an attractive, but also a functional toilet.
Video
See the instructions for making a PVC box:
A photo
