It is truly unique seeking to make their accommodation all, but attention is paid to different rooms at the same time. Most often, experiments begin to spend in the bedroom, as it is hidden from others and can be fully decorated only in accordance with the desires of the owners. Make a unique bedroom interior is not so difficult. In total, half an hour, for example, it will be necessary to organize a backlight under the bed using LED tape. You can cope with its installation on your own.
LED ribbons There are several, so it will be necessary to start with the selection of this material. The most accessible at the price of 220 volts ledents are considered. But for the bedroom this option is not very suitable, since the emitted light is obtained too bright and cannot be adjusted. Ordinary LED tape that is sold literally everywhere, also does not require high costs. But at the same time it will be necessary to purchase an additional block.
RGB Ribbon is an option for those who want to make a backlight under the bed unusual. Options for shades in such a tape. Special console can be used to control the luminescence. RGB The controller and the control panel are sold separately from the tape.
The cost of these options is different, but at the same time in the practice of attachment justify itself. It looks the interior, the better, the more expensive materials for the backlight are used.
The required length of the tape is pretty simple. To do this, it is necessary to decide where the LEDs will be attached and measure the bed. The received data is worth adding at least five percent to avoid further problems. Connection questions are desirable to solve in advance. Options depend on the type of LED tape selected.
For mounting the backlight, the bottom of the bed is best suited. Lighting in this case is optimal for the bedroom. For a long time, the tape can hold the clamps on themselves. If you cannot use them because of the features of the bed, you can pick up other options. When using glue, it is necessary to degrease the purified gasoline or alcohol of the attachment. After installing the tape and connections to each other of all the elements provided, you need to check the performance of the backlight. With the right actions, it will immediately start working.
Dürolight instead of LED tape can also be used. It will cost cheaper, and according to characteristics is practically no different. But at the same time, some people do not like his glow, so you need to navigate here on personal tastes and preferences.
Many dream of turning the bedroom into something extraordinary, because this is a place where it is necessary to relax and hide from around the world. We advise you to pay attention to the backlit bed capable of decoracing any interior, give him mystery, originality.
In the bedroom, the main attribute is the bed. Therefore, the lighting should mainly emphasize this piece of furniture. The best option will be the organization of the backlight in this zone. To beautifully emphasize the design, you need to pay attention to in such parts as the general contour of the bed, the decorative design of the back. It is also desirable to additionally emphasize the bed linen and covered.
When choosing lighting, you should stick to the rules:
- eliminate the presence of bright light on a smooth glossy surface;
- do not use green and blue color;
- to make a white light warmer, muffled, it is worth adding a bit of a bright sister.
For the bed you can use four types of backlighting:
- illumination from the LED tape, which can be independently attached to any piece of furniture;
- from the LED tape with a built-in Wi-Fi module, due to which the lighting can be controlled using its own smartphone, changing the shade, brightness and many more additional functions;
- bed lighting with motion sensor, allowing to include lighting if necessary;
- lighting from Duralight, which is a glowing cord.
Any option has its own characteristics and advantages. Each of them can be purchased in the embedded form along with the bed or perform an independent installation.
Location
The place of placement of the backlight for the bed depends on many factors: features of the design, interior of the bedroom and its parameters, personal wishes of the owners. We will analyze individually the features of the illumination of each part of the structure.
In the head of
The headboard is most often equipped with backlight. Lighting devices can be used here:
- spotlights;
- lED bulbs;
- lED Strip Light.
It looks beautiful and modern on the direction of the direction of white light fluxes from the head of the top. If you wish to add this part of the design of beauty and functionality, you can install mirrors or small shelves.
Often, instead of the head of the bed, the bedside niche is equipped with an extra light. This uses LED backlight.
Below
The bed equipped with backlight from below looks gorgeous. To make the interior easier and modern, you can use the so-called "steaming" bed on inconspicuous legs, which is complemented by lighting from the LED tape attached around the perimeter.
In order to connect the backlight with your own hands, you will need to perform the following actions:
- first of all, it is necessary to secure the ribbon, putting on every end on the cap;
- then you should put the adapters and immediately attach the forks to them;
- check the operation of the LED backlight;
- now you can proceed to securing the backlight. This requires special attachments that are screwed to the bed with self-draws;
- after the tape is fully attached, you can turn on the ribbon in a pre-prepared extension cord and enjoy a beautifully highlighted bed.
If there is an electrical wiring skills, you can make everything more accurate by setting the hidden wiring with the output specifically allotted to illuminate the switch.
Podium with backlit
The bed podium looks spectacious and stylish. In addition, it helps to significantly save space. And if you add a backlight to this furniture, the "Effect of the Warning" will be created in the dark. It is also convenient, because at night the probability of falling will be excluded due to the lighting of the stage.
In order to organize lighting in this part of the design, two options are used:
- spotlights;
- lED Strip Light.
Often, additional storage boxes are embedded in the podium. Here it is necessary to provide lighting, which will help save the order and create comfortable conditions for the user.
Children's models
For any child, a private room is a space where you can enjoy the game, rest or own fantasies. In order to make this world more interesting for a child, it is worth thinking about the acquisition of a children's bed, designed in the form of favorite cartoon characters.
For boys, a wide variety of beds are developed, which will help the baby to present themselves as a rider. The best option will be the bed equipped with backlight. It will be very interesting to sleep in the car with luminous headlights and dimensions.
For girls, beds are also developed in a larger pink or white design. Additional lighting can be installed in the following parts:
- headlights;
- strategier lower backlight;
- nizhnekontural headlights, which are cilia.
These models are equipped with a remote control that allows you to adjust lighting at a distance.
Children are often afraid of darkness, so the bed with additional lighting will become an excellent alternative to the nightlight. You can organize additional lighting in the bedroom above the bed, which will make children's sleep more calm. To do this, you can apply point lights or LED tape.
The bed is the most significant piece of furniture for any person. Therefore, it is necessary to approach it thoroughly:
- the frame is the main part of any furniture, so it is worth picking it under the overall bedroom interior. It is also worth paying attention to the strength characteristics of this item, since it will be a heavy base for it;
- the base provides comfortable leisure conditions, so it is worth choosing an orthopedic design made of wooden bench-type wooden lamellas;
- the mattress should be made of natural and durable materials. He should also be comfortable;
- the size of the bedroom also plays a very important role. When choosing it is worth paying attention to the number of people sleeping in the room, as well as their complex;
- the backlight of the bed must be built in high quality and safely, as well as in working condition. When buying it is worth paying attention to the quality of the electrical wiring and evaluate its safety.
When purchasing furniture should pay attention only to functional models that have a certificate of quality and sanitary and hygienic conclusions. This is especially true for children's furniture. Building construction It is advisable to entrust qualified masters with good experience.
Video
Photo
The spectacular backlight of the bedside space is the next decorative application of the LED tape. For a double bed, it will become a kind of highlight, which will create an intimate atmosphere in the room. And so unusual decoration of a children's bed will save the child from complete darkness during sleep. I will cope with such an interesting task, and make a bed with backlit with your own hands for everyone. It takes only a few hours of free time, a small bobbin with a LED ribbon and a girlfriend tool.
Preparation and installation options
The preparatory stage calculates the size of the bed and the place to accommodate the LED tapes and. To do this, you will have to remove the mattress, find the best place to mount the LED tape so that its light is pointing down, and measure the length of all segments that will be located around the perimeter of the structure. Then you need to choose the type of light-emitting chips:
- SMD 3528 IP20 brightness 420 lm, worth about 60 rubles / m;
- RGBW-SMD 5060 IP33 with a brightness of 2000 lm, worth about 200 rubles / m + RGBW controller;
- or another intermediate option.
After that, you need to purchase an LED tape and the same length. What is the cost of the profile? First, the clean and smooth surface of the LED-ribbon profile is well glued, and secondly, it will serve as a radiator, since quite powerful LED tapes are not recommended to be operated without an additional heat sink. Often the bearing part of modern double beds is made of fiberboard (MDF) or wood, which possess extremely low thermal conductivity. But even if the frame of the bed is made of steel, glue LED segments to it is not desirable. Only inside the aluminum profile of the LED tape will be reliably protected from any mechanical impact, such as:
- vacuum cleaner tubes during cleaning;
- children's curious hands;
- teeth and paws of domestic animals.
You can use a cheapest option - plastic cable channel. It is an order of magnitude less and sold in every construction store. That's just done very bright and especially RGB the backlight of the bed will no longer succeed. The plastic will not be able to dissipate the heat from the radiating crystals for a long time and effectively, which will lead to their degradation for the first year of work. LED tape without silicone coating type SMD 3528 with a density of elements 30, 60 or 120 pcs / m of any color of the glow is suitable for mounting into the cable channel.
At the last stage of the preparatory work you need:
- cut the LED tape and profile on the segments of the desired length;
- degrease the inner surface of the profile for reliable clutch with LED segments;
- prepare connecting wires and, if desired, switch.
Schematic scheme
The electrical circuit of the backlight bed is extremely simple and consists of all of the 2 key elements: power supply and LED tape. If the use of RGB or RGBW ribbon is used, the diagram is complemented by RGB or RGBW controller. Below is a backlight diagram using multicolor LED tape.
Build and connecting bed lighting
Depending on the type of LED tape and the location of the power source, the cable is selected by the corresponding length and the number of wires. For security reasons, as well as to ensure sufficient load capacity, it is better to use a multicore copper cable in a double insulation with a cross section of 1.0 mm 2. He is flexible, it will be good and calmly (without overheating) skips up to 6 A.
It is extremely undesirable as a feeding wire backlighting the bed. The cross section of one vein is approximately 0.2 mm 2, which means that it will be able to miss no more than 1.5 A and that with a gradual laying of insulation from overheating. So to connect powerful RGBW tapes need a more reliable option.
For the electrical connection of individual sections of the backlight, located around the perimeter of the bed, you can use special connectors with existing wires. This method will speed up the assembly process and will allow in the future to quickly disassemble the design. If this method is unacceptable, then all areas will have to be soldered together with separate wires.
Having all the necessary parts of the LED backlight for the bed, you can start assembling in the following sequence:
- glue a led tape into the profile;
- solder wires in compliance with polarity or copper them with connectors;
- connect the power supply and make a trial switching on;
- place the soldering inside the profile to pour the thermoclaim;
- finished backlight attach to the base using standard snacks, screws or screeds, depending on the type of bed.
For a larger light effect, one of 4 LED segments are attached beyond the back of a double bed at the headboard, directing the light stream up. Open currents of the RGB controller, power supply and wires are reliably isolated to prevent fire and exclude electric shock.
The backlit bed on LEDs will be much functional if the Wi-Fi module is built into the controller. In such an embodiment, the operation of the backlight can be controlled from the smartphone, easily changing brightness and chromaticity. In addition, the program allows you to set the time for switching on / off the backlight of the bed, set the alarm clock with a smooth increase in brightness and use other useful functions.
Read the same way
One of the variants of decorative lighting of the children's room and the bedroom is to create a hidden illumination of the bedside area. For this, as a rule, a LED ribbon is used or duralite, which is fixed around the perimeter of the bed. Next, we will look at how to make a bed with backlit with your own hands, providing several options for instructions with photos and video examples!
Idea number 1 - LED tape
It is best to connect a single color or multicolor (RGB) LED tape at the bottom of the bed contour. In the first case, only a ribbon with diodes and a suitable power supply will be needed. In the second case, it is additionally necessary to buy a RGB controller and control panel to create a suitable illumination.
So, to make LED lighting on the bed in the bedroom, you must perform the following steps:
Review of the finished LED backlighting of the bedroom bed
Hidden backlight controlled via Wi-Fi
Here on such instructions, you can easily make decorative lighting from the bottom of the bedside zone. A reasonable addition to such an idea will be backlit, as shown in the video above. In this case, the LED tape will turn on only if the sensor detects in the bedroom of the movement, which will make hidden lighting not only functional, but also economical!
Idea number 2 - Duralight
Another way to make a hidden light backlight under the bed with your own hands is to connect the duralite bed along the contour (special glowing cord). In this case, it will also take a little time to create decorative lighting, and you will only need Duralight from the materials, an electrical cable for connecting to the network, special plugs, screws and fasteners. 
So, it is possible to fix duralite to the bed as follows:
- Choose a suitable place of attachment of the luminous cord.
- For one of the ends of each duralit, secure special plugs.
- Connect the electrical cable to the free ends.
- Secure the backlight at the bottom of the bed. Mounts need to be put every 25 cm.
- Connect the cable to the network and check the finished decorative lighting.
As you can see, make a bed with backlit with your own hands in the nursery or the bedroom is not very difficult. For inspiration, we recommend that you look at the finished photos of the ideas: 
By the way, another alternative option for creating lighting over the beds will be either lamps behind the back. In the second case, the backlight will also be hidden, but the light will emphasize the head of the head of the head, and not the floor, which in its own it is interesting to complement the interior of the room. This option looks about the same as in the photo: 
There is nothing complicated, there is still a number of nuances that are better to consider before it is to attach. Therefore, we wrote this, we hope for detailed instructions.
Let's first figure out what the backlight did you buy?
If she was bought in our, then everything will be clear to you, because just on her example we will analyze the installation.If in another store - then just see the principle and apply it to your copy.
Immediately, we note that the standard illumination of the bottom of the bed from the Belmarco plant has only one color of the glow (warm white). It is impossible to choose other colors, as they use a single-color LED tape, and not RGB tape. They have no remote control, they are equipped with a standard On / Off button. Therefore, information about the settings of the console modes, for people who bought such a backlight will not be relevant.
So proceed ...
1) Check the backlight on performance.
The very first thing to do is to check that the purchased backlight works. To do this, connect all the items, see if the battery is inserted into the console (if you have it) and connect to the network. Make sure it turns on and turns off that all LEDs on the tape are glowing. Our backlights we all check for performance before selling, so there should be no problems with them. If you bought it elsewhere and it did not work with test start - it's better to immediately return to the seller.2) Collect the framework of the bed
Next, you need to assemble the frame of the machine bed, it will be much more convenient to set the backlight.- Attach the beds on the sidewalls the beds on which the lamellas under the mattress
- Connect the sidewalls with the front of the bed and the back
3) Determine where the socket is closer
Now think from which side you better output the backlight power wire. If the outlet is closer to the front of the bed - you will need to start the blowing of the LED ribbon. If the outlet is closer to the rear back, then we will begin to glue the ribbon with it.4) The backlight on the crib is glued to the side
Next important point. The LED tape is glued to the sidewall of the crib, under wooden bars so that the light from her does not go down, as real motorists are accustomed, and to the side, to the opposite side of the typewriter. Therefore, it can be glued both on the near sidewall and on the far. We recommend glue to the far, i.e. The one that is located near the wall. In this case, it will be more light in the room, so the nightlight function is better. In addition, in our backlights there is the ability to adjust the brightness, so you can always choose the optimal level of glow. The Belmarco manufacturer advises to glue into the near, so that the room was not very light at night, because they do not have any brightness adjustments.
5) reliably fasten the backlit control segment
Before the start of the tape, which is directly glued on the bed, there is a piece of wire in white thermal insulation about 20-30 cm. There is a control unit in it, which is responsible for adjusting and working with the remote control. In order not to damage this block, we recommend fastening it with two cable brackets to the front or back of the bed, carefully having them with a hammer. This will also help avoid breaking the tape from the bed, if children accidentally or specifically pull over the edge of the wire or the backlight power supply.
6) Gently glue the backlight on one side of the bed bed
You can start installing the backlight just with the feeding of this piece of wire. But as practice has shown, it is more convenient to first cry out some part of the backlight, and then nourish the initial piece. LED tape gluits fairly easy. We gradually tear off the protective film from it and gradually, pressing to the base gluing along the entire length. The edge of the tape if it remains, start and glued on the back of the bed (or on the front, if you started glued with the back).
Backlighting mode settings from the console:
