TES V: Skyrim Code guide: cheats using the console. Cheats, codes gta san andreas Skyrim code for passing the quest

To complete quests in Skyrim, we need the following cheat codes:

showquesttargets - Shows the ID of the active quest

getstage (without brackets) - shows the stage of the specified quest (the resulting number is not % completed).

setstage [stage] (without brackets) - set the stage of execution

movetoqt (without brackets) - teleport to the key point (the last unfinished stage) of the specified task. (added by Robin)

sqs (without brackets) - show a list of all stages of the active quest (they are different for each quest). Used in the setstage cheat.

player.completequest (no parentheses) - complete the quest. This command is not recommended as you won't be able to get the next quest if it's a quest chain. Use only if you want to complete the quest without the possibility of further progress.

And so, we already know all the necessary console commands for the successful completion of quests in Skyrim, but what and why to enter is not. Since we will perform all actions in the console, I want to remind you that to scroll the text in the console, you must use the and keys. The method written below describes how to move from one stage of the quest to another.

Save the game and don't overwrite this save until you complete the quest.

Open your quest list ([J] key)

Select the required quest you want to complete and make it active - press .

Open the console and enter showquesttargets - get the quest ID.

In the resulting list, look for Current quest: Quest ID - remember / write down this ID.

Now we enter movetoqt (without brackets) and try to complete the quest, and if nothing comes out, read on.

We enter in the console getstage (without brackets). After that, the stage for completing this quest will appear in the console in the following form: GetStage >> [number].00 - remember / write down this number. Now we need to find out which stage of the quest comes after this, obtained using the getstage command.

We enter in the console sqs (without brackets) - we get a list of all stages of the specified quest (for each quest they are different) in the following form Stage [stage]: 1 (or 0). 1 - indicates that this stage has already been passed, and 0 - not yet.

In the resulting list, we are looking for our quest stage, obtained using the getstage command, and see what stage comes after it - remember / write down the number. For example, if using getstage you received GetStage >> 400.00, and in the list obtained using the sqs code, after the line Stage 400: 1, there is the line Stage 450: 0 - remember / write down the number 450.

Enter in the console setstage [stage] (without brackets) - set the stage of the quest. As a stage, we enter the number obtained in the previous paragraph (we have 450), and as the quest ID - the ID obtained using the showquesttargets cheat.

Enter movetoqt (without brackets) - teleportation to the target of the active task.

We continue to pass the next stage of the quest.

Notes:

If nothing worked the first time - repeat steps 9 and 10 several times, but at the same time change the stage - enter the next one in the list obtained using the sqs command (without brackets).

If you repeat steps 9 and 10, while changing the quest stage (all in turn) from the one obtained using the sqs command (without brackets) to the last one in the sqs list (without brackets), then you will complete all stages of this quest and will move from one key points to another. The move will not always happen. This is how you can complete any quest 100%.

It is not necessary to go exactly to the next stage of the quest, you can go directly to the last one, but in this case you may not receive the next quest, since you will not have an active quest or point for teleportation with the movetoqt command - you will not know where to get it ( next quest).

If you go directly to the last stage, then you may not receive all the rewards for this quest (not tested).

You cannot activate the previous stage of the quest (I did not succeed).

How to find out the name of a quest by its ID

If, after entering the showquesttargets command, you get several lines of Current quest: quest ID and you do not know which of these IDs corresponds to a particular quest, do the following:

enter in the console help quest ID 4

in the resulting list, look for the line QUST: quest_id (some ID) ‘Quest name’

repeat steps 1 and 2 until you find the quest you need by its name.

Codes are entered during the game. After successfully entering the cheat, you will see a corresponding message on the screen. To disable the cheat or enhance its effect, enter it again.

Some of the codes may prevent the passage of the game by 100%. It is not recommended to save the game after activating any of the following codes.

Cheats for health, armor and money in GTA: San Andreas
Full health, body armor and $250,000
Immortality You will receive protection from bullets, impacts and fire, but you can die from the explosion, falling from a height or drowning. You can also get hit by a car.
Endless breath underwater
Never hungry
Adrenaline Mode Game slowdown and extra powers to hit harder and push cars
Codes for weapons in GTA: San Andreas
Weapon set 1 for lovers Brass Knuckles, Bat, 9mm Pistol, Shotgun, Mini SMG, AK-47, Rifle, Rocket Launcher, Molotov Cocktail, Spray Paint
Weapon Pack 2 for Professionals Knife, Desert Eagle Pistol, Scattergun, Tec-9, M4, Sniper Rifle, Flamethrower, Grenades, Fire Extinguisher
Psycho Weapons Pack 3 Chainsaw, Silenced Pistol, Combat Shotgun, MP5, M4, RPG, RC Charge
Infinite ammo and shooting without reloading
The maximum level of possession of all types of weapons
Auto-aim when shooting from a car After entering this cheat, CJ will be able to conduct accurate aimed shooting from the car
Codes for police attention in GTA: SA
Reduce wanted level All wanted stars disappear
Freeze wanted level Wanted level does not increase
Increase wanted level by 2 stars
Max wanted level 6 wanted stars
Codes for attractiveness and statuses in San Andreas
Maximum Respect
Maximum attraction
jock
Thick
Thin
Maximum Stamina
Change the skin (model) of the hero
Codes for cars in GTA: SA
Rhino tank
Car for stuntmen
race car 1
race car 2
coffin carrier
Limousine
police jeep
garbage truck
Golf Cart Caddy
ATV
Gasoline tanker
Bulldozer
monster jeep
Jeep Rancher
Codes for planes in GTA SANANDRES
Hydra Fighter
Helicopter Hunter
stunt plane
Codes for other vehicles in GTA: San Andreas
hovercraft
Jetpack (jet pack)
Get a parachute
Codes for the characteristics of cars and traffic in GTA: SA
Maximum driving skill for all vehicles
All cars have nitro Its supply is limited, so to replenish it you will have to get out and get back into the car
Blow up all vehicles All vehicles in the player's line of sight will be blown up
Invisible cars All vehicles become invisible (transparent), with the exception of motorcycles. Cars only have wheels
Perfect control Press L3 to jump
Traffic lights are always green Cars go faster
Aggressive drivers Drivers and their passengers start gunfights with police
pink cars
black cars
Cars are flying Having accelerated by car, you can take off. Control like an airplane
Cars drive on water
boats are flying All boats and yachts fly, though it’s impossible to fly high on a yacht, because. she is too heavy
Expensive cars everywhere
Cheap cars everywhere
All cars and people from the countryside
Cars fly off on impact
Death machine Car - tank: destroys any transport that it touches
Weather codes in GTA: San Andreas
Sunny clear weather
very sunny weather
Cloudy weather
Rainy weather
Foggy weather
Hurricane with thunder
Sandstorm
Cheats for time in San Andreas
Speed ​​up game time
Speed ​​up the gameplay
Slow down gameplay Can be injected multiple times to enhance effect
Always midnight The clock stops at 00:00. The weather will suddenly change. Death will move and stop the clock at 12:00
orange sky After a quick change in weather, the sky will be orange and the time will be set to 21:00
Codes for gameplay in GTA: SA
Passers-by fight each other
Everyone has a weapon
Pedestrians attack you
Pedestrians attack you with guns
Commit suicide
Gangs control the streets The streets of the cities are completely empty, there is no one on them except for the bandits from the opposing factions, who are firing without respite.
Bandits are everywhere Gangs are everywhere, they will surround you everywhere, even where they do not exist (for example, Ballas in Las Venturas)
My streets All the streets are under the influence of your gang
Elvises are everywhere Elvis Presley lookalikes walk the streets
Beach party All the people are dressed like they are on the beach. CJ wears shorts. All transport in beach style
Ninjas are everywhere Changes pedestrians to Asians with katanas. Most vehicles are black motorcycles
Magnet for girls The streets are filled with girls of easy virtue with dildos, who are drawn to the main character, do not hesitate to get into his car and protect him from ill-wishers
prostitutes pay you Instead of you paying them
rustic theme Only creaking village carts and villagers will be found on the streets
Chaos Mode Pedestrians become violent, as in the last missions of the game's campaign. Houses are burning, people are stealing TVs
Clout Theme Pedestrians become fast food workers and clowns. CJ in shorts and clown mask
Super Jumping
Super Punch
jumping bmx You can jump even higher on BMX bikes
No pedestrians, little traffic
Adopt a pedestrian with a 9mm Pistol Pedestrians get a 9mm pistol if they don't already have one
Adopt a pedestrian with a Grenade Launcher Pedestrians get a grenade launcher

For all connoisseurs of an interesting pastime, the GTA game was specially created. The first part, released in the era of the 2000s, once impressed all participants with special high-quality graphics, a powerful system. This project was successful for the development studio, and new parts of this famous game came out of the hands of specialists one after another. Today we can try five parts at once, each of which contains about 100 missions.

But it is very difficult to pass each level, so you can use the codes for GTA: San Andreas. On a mission, to get money, weapons, and even to commit complete chaos, there are cheats - combinations of letters that give the player the opportunity to get what they want without any time costs in a couple of seconds.

General information

To complete the game at 100%, you need not only a lot of desire and free time to overcome the locations of the main storyline. You also need to know cheats and codes. Their use is most often required in small, so to speak, side missions. In the game, all locations are divided into two categories: those that affect statistics, and those that are available for passing, but do not change the overall course of the plot. To complete all these quests, codes for GTA: San Andreas may come in handy. On missions of varying difficulty, to purchase a supercar or for an infinite number of lives, you can enter a code, get what you want and complete the game 100%.

Cheats for different occasions

The main character can find himself in different situations, and sometimes the protection that he has will be too little. To protect yourself from the powerful blows of the police, the shots of bandits, you will need special codes for GTA: San Andreas. On a mission where you need to purchase an invisible body armor, you need to enter the BAGUVIX combination. This allows you to protect yourself from everything.

Many say that this is a kind of semi-immortality, which can help with the passage of any mission.

Cheats for fun

Very often the character needs to replenish his strength, food is constantly required. This is very distracting from the main mission, so you can use codes suitable for this situation on GTA: San Andreas. On a mission where you need to save time and not be distracted by eating, the AEDUWNV cheat is suitable. After its introduction, the need for food completely disappears.

Many participants, choosing free passage locations (which are not included in the statistics), love experiments. So, if you are interested, you can see how a different physique of a character will look. To get fat dramatically, you will need to enter the letters BTCDBCB. The combination JYSDSOD changes the body and makes the hero jock. And in order to lose weight dramatically, you need a code of the letters KVGYZQK.

Passage of missions using cheats

If we move on to serious combinations, then we need to consider another section of the GTA: San Andreas game. The code for completing the mission does not exist separately, but it is quite possible to become a millionaire in a second. A set of letters in the following order HESOYAM gives Carl Johnson $25,000, health, and full equipment and armor.

In order for the changes to specifically affect the location, without loss of health, money and weapons, there are other interesting cheats in GTA: San Andreas. The ASNAEB mission code removes all the stars in the location. The AEZAKMI cheat allows Karl to act with impunity in his hometown, because thanks to this combination, he will never be found.

A set of letters in this order: LJSPQK - creates a level of 6 stars in the GTA: San Andreas game. The code for completing the mission in full cannot be found: you can use cheats only on certain parts of the location (increase the level of health, increase the amount of money, and so on).

If the player is very worried about the statistics, then the set of letters OGXSDAG makes the total score and points for completed missions the highest.

Other codes

In general, there are a lot of cheats in the GTA game, which are invented only for entertainment. For example, those who have already completed 100% of the main locations will like to have fun with the character in this way: change physique, attract girls, or recruit into a group. So, to seduce some beauty, the sequence of letters BEKKNQV is entered. An additional combination of EHIBXQS will give the hero's image even more beauty and attractiveness - there will be no end to the girls.

If girls are not your favorite topic, then you can die altogether. The combination of SZCMAWO is suicide. It is not a pleasant sight, but it will amuse those who already

Transport codes

The whole atmosphere in which the city and Carl Johnson are immersed is speed, cars, cars, chase and so on. The real era of gangsters is unfolding in the GTA: San Andreas game. You can’t enter a mission pass code, but it’s quite possible to drive cool cars, absolutely any. You can drive a tank using the AIWPRTON cheat. You can even ride a coffin wagon by entering the combination AQTBCODX. Those who need a car that is ready to go anywhere and how they want will need a set of the following letters: AGBDLCID. Due to this code, you can get an all-terrain vehicle. You can drive a luxury limousine using the KRIJEBR cheat, or you can experience super speed in the fastest racing car using the PDNEJOH code.

Even in the passage of the most difficult location, you may need some code for GTA: San Andreas. It is the easiest way to complete a mission using cheats, so those who want to complete 100% progress in GTA will definitely need them. Codes for all occasions: for fun, for relaxation or for a speedy passage - will allow you to enjoy your time in the game to the fullest.

Participants who have tried this entertainment can say with confidence that the cheats here are help in passing individual levels. Knowing individual combinations of letters, you can complete any mission beautifully: in an expensive car or a luxurious limousine. There is no limit to fantasy, so everyone can come off here using a variety of codes.

Some codes may be required during the game. This mainly happens when there are difficulties with further passage due to bugs or player errors.

The main cheats for the passage of the Skyrim quest:

1. getstage (square brackets are not needed) - find out the stage of the quest.

2. setstage [stage] (square brackets are not needed) - set the stage of the quest.

3. movetoqt (square brackets not needed) - teleport to the quest marker.

4. resetquest (square brackets are not needed) - reset the stages of the quest to go through it again. You will need to save and restart the game to update the quest log.

5. player.completequest (square brackets are not needed) - complete the task. It is not recommended to use this code to complete the Skyrim quest when it comes to a chain of tasks. Otherwise, the next quest cannot be obtained.

Using a cheat is allowed if the game is very buggy and you decide to sacrifice the mission in favor of further progress.

Additionally:

The showquesttargets code allows you to find out the quest ID that will be required for the above commands.

sqs (square brackets are not needed) allows you to view the full list of quest stages.

We got acquainted with the main commands that help to successfully change the course of the game. It remains to figure out in what sequence to enter cheats for completing the quest in Skyrim. All actions are performed in the console (call with the "~" key), scrolling through the list of commands with the "PageUp" and "PageDown" keys.

Procedure:

1. Create a save (do not overwrite the save until the quest is completed).

2. Call up the log and activate the required task.

3. Enter showquesttargets in the console to get the required ID.

1. Enter the code for getstage ID quests into Skyrim. Remember the stage number (an integer from the displayed line).

2. Enter sqs (square brackets are not needed) to view the list of stages and find out whether the desired stage has been passed (Stage ID value: 1) or not (Stage ID value: 0).

3. Enter setstage ID [stage number] (square brackets are not needed) to set the desired stage.

4. Enter movetoqt (square brackets are not needed).

5. We continue the passage.

If the method does not work on the first try, repeat step 5 (introducing the Skyrim cheat to complete the movetoqt quest) until it works. In this case, sequentially change the stages, up to the last. Thus the quest will be completed.

In the process, there will be movements through locations, but not every time. You can immediately enter the last stage of the quest, but in this case there is a risk of being left without all the rewards available in the mission.

Cheat codes in the game Skyrim 5 (The Elder Scrolls V: Skyrim) allow you to customize the game as you wish.

How to enter codes:

1. Press the "~" (tilde) key to open the console window.
2. Enter the required code (all codes are listed below).
3. Press the "Enter" key to run the code.
4. Press the Esc key to close the console window.

Rules for entering codes:

• The commands are not case sensitive (that is, the letters "A" and "a" are identical).
• In writing some codes there are symbols of square brackets - . This means that instead of these brackets, you need to enter any suitable value. You don't need to enter the parentheses themselves. For example: instead of Player.SetAV [#], enter Player.SetAV HeavyArmor 100.

All cheat codes for Skyrim 5

Character Upgrade Codes

Skyrim 5 cheats - Hero superpowers

TGM	Enable Character Immortality, Infinite Weapon Charges, Infinite Carry Weight
TCL	Enable the ability to walk through walls
Player.SetAV Invisibility 1	Enable invisibility. Neither enemies nor allies will notice you. (To disable invisibility, enter 0 instead of 1)
Player.SetAV SpeedMult [#]	Set running speed as a percentage. (default: 100%)
SetGS fJumpHeightMin[#]	Set jump height (default: 100%)
Player.SetAV AttackDamageMult [#]	Increase weapon damage by # times
Player.SetAV LeftWeaponSpeedMult [#]	Increase the attack speed of your off-hand weapon by # times
Player.SetAV WeaponSpeedMult [#]	Increase the attack speed of your right hand and two-handed weapons by # times (all two-handed weapons count as a right hand weapon)
PSB	Get all spells, abilities, shouts of power (Warning! leads to game instability, not recommended for use)

Skyrim 5 codes - Main characteristics of the hero

ShowRaceMenu	Change the character's race. Allows you to go back to the character settings menu (Attention! After entering this code, character skills may be reset)
Player.AdvLevel	Raise character level
Player.SetLevel[#]	Set the required character level
Player.SetAVHealth[#]	Set max. number of lives in # units
Player.SetAV Magicka [#]	Set max. amount of magic in # units
Player.SetAV Stamina [#]	Set max. amount of stamina in # units. If set to a high value, the character will not get tired while running.
Player.ModAV CarryWeight [#]	Increase your character's maximum carry capacity by # units
Player.SetScale[#]	Increase the growth of your character, where #: 1 - 100%, 1.1 - 110%, 0.9 - 90%, etc.

Codes in the game Skyrim - Character Skills

Increasing experience in skills:

AdvSkill Onehanded 999999	develop the "one-handed weapon" skill for 999999 experience
AdvSkill Twohanded 999999	Two-handed weapon
AdvSkill Marksman 999999	shooting
AdvSkill Block 999999	block
AdvSkill Smithing 999999	blacksmith craft
AdvSkill HeavyArmor 999999	heavy armor
AdvSkill LightArmor 999999	light armor
AdvSkill Pickpocket 999999	pickpocketing
AdvSkill Lockpicking 999999	breaking into
AdvSkill Sneak 999999	secrecy
AdvSkill Alchemy 999999	alchemy
AdvSkill Speechcraft 999999	eloquence
AdvSkill Alteration 999999	change
AdvSkill Conjuration 999999	witchcraft
AdvSkill Destruction 999999	destruction
AdvSkill Illusion 999999	illusion
AdvSkill Restoration 999999	recovery
AdvSkill Enchanting 999999	enchantment

Setting the skill level:

Player.SetAV Onehanded 100	raise "one-handed weapon" to level 100
Player.SetAV Twohanded 100	Two-handed weapon
Player.SetAV Marksman 100	shooting
Player.SetAV Block 100	block
Player.SetAV Smithing 100	blacksmith craft
Player.SetAV HeavyArmor 100	heavy armor
Player.SetAV LightArmor 100	light armor
Player.SetAV Pickpocket 100	pickpocketing
Player.SetAV Lockpicking 100	breaking into
Player.SetAV Sneak 100	secrecy
Player.SetAV Alchemy 100	alchemy
Player.SetAV Speechcraft 100	eloquence
Player.SetAV Alteration 100	change
Player.SetAV Conjuration 100	witchcraft
Player.SetAV Destruction 100	destruction
Player.SetAV Illusion 100	illusion
Player.SetAV Restoration 100	recovery
Player.SetAV Enchanting 100	enchantment

Codes in the game Skyrim - Character Perks

With the help of these cheat codes for Skyrim, you can quickly upgrade all the skills and get all the perks. To do this, we need the following cheats:

To upgrade all perks, do the following:

1. Using the AdvSkill [X] cheat, we raise any skill to level 100:
   1. Example: AdvSkill Destruction 999999.
2. Apply the code Player.SetAV [N] 0 - set the skill level to 0.
   1. Example: Player.SetAV Destruction 100.
3. After that, you can again add new experience to this skill. Repeat steps 1 and 2 to earn more ability points. From time to time we lower the level of the character to the previous value.
4. The earned points, which are several times more than usual, are spent on the purchase of all available perks in Skyrim.

All perks and spells can be added manually if you know their exact name.

Player.AddPerk [name]	Add Ability
Player.RemovePerk [name]	Remove ability. Ability points will not be refunded
Player.AddSpell [name]	Add Magic Ability to Player Character
Player.RemoveSpell [name]	Remove Ability

Skyrim codes - Increasing damage from weapons, spells

These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all hits, spells of this type.

Example: Player.SetAV DestructionPowerMod 100

This code will increase the damage from destruction spells by 100%, that is, twice.

Player.SetAV OneHandedPowerMod [#]	increase the damage of "one-handed weapons" by # percent
Player.SetAV TwoHandedPowerMod [#]	Two-handed weapon
Player.SetAV MarksmanPowerMod [#]	shooting
Player.SetAV BlockPowerMod [#]	block
Player.SetAV SmithingPowerMod [#]	blacksmith craft
Player.SetAV HeavyArmorPowerMod [#]	heavy armor
Player.SetAV LightArmorPowerMod [#]	light armor
Player.SetAV PickPocketPowerMod [#]	pickpocketing
Player.SetAVLockpickingPowerMod [#]	breaking into
Player.SetAV SneakPowerMod [#]	secrecy
Player.SetAV AlchemyPowerMod [#]	alchemy
Player.SetAV SpeechcraftPowerMod [#]	eloquence
Player.SetAV AlterationPowerMod [#]	change
Player.SetAV ConjurationPowerMod [#]	witchcraft
Player.SetAV DestructionPowerMod [#]	destruction
Player.SetAV IllusionPowerMod [#]	illusion
Player.SetAV RestorationPowerMod[#]	recovery
Player.SetAV EnchantingPowerMod [#]	enchantment

Cheats from Skyrim - The screams of dragons

Each line of the table contains three codes. You can only enter one of the three.

Player.TeachWord [shout code]	Learn the word of power
Player.TeachWord 46B89 Player.TeachWord 46B8A Player.TeachWord 46B8B	Call of the Dragon
Player.TeachWord 13E22 Player.TeachWord 13E23 Player.TeachWord 13E24	juggernaut
Player.TeachWord 602A3 Player.TeachWord 602A4 Player.TeachWord 602A5	ice form
Player.TeachWord 6029A Player.TeachWord 6029B Player.TeachWord 6029C	thunder call
Player.TeachWord 20E17 Player.TeachWord 20E18 Player.TeachWord 20E19	fire breath
Player.TeachWord 48ACA Player.TeachWord 48ACB Player.TeachWord 48ACC	Time slowdown
Player.TeachWord 2F7BB Player.TeachWord 2F7BC Player.TeachWord 2F7BD	Rapid dash
Player.TeachWord 60291 Player.TeachWord 60292 Player.TeachWord 60293	friendship with animals
Player.TeachWord 3291D Player.TeachWord 3291E Player.TeachWord 3291F	Elemental Fury
Player.TeachWord 32917 Player.TeachWord 32918 Player.TeachWord 32919	incorporeality
Player.TeachWord 5D16C Player.TeachWord 5D16D Player.TeachWord 5D16E	frosty breath
Player.TeachWord 602A0 Player.TeachWord 602A1 Player.TeachWord 602A2	voice cast
Player.TeachWord 5FB95 Player.TeachWord 5FB96 Player.TeachWord 5FB97	Disarmament
Player.TeachWord 3CD31 Player.TeachWord 3DC32 Player.TeachWord 3CD33	Clear sky
Player.TeachWord 51960 Player.TeachWord 51961 Player.TeachWord 51962	Call of Valor
Player.TeachWord 44251 Player.TeachWord 44252 Player.TeachWord 44253	dragon slayer
Player.TeachWord 60297 Player.TeachWord 60298 Player.TeachWord 60299	death sentence
Player.TeachWord 60294 Player.TeachWord 60295 Player.TeachWord 60296	Aura whisper
Player.TeachWord 6029D Player.TeachWord 6029E Player.TeachWord 6029F	kin world
Player.TeachWord 3291A Player.TeachWord 3291B Player.TeachWord 3291C	fright

Shouts from Skyrim: Dawnguard DLC

Player.TeachWord 02008A65 Player.TeachWord 02008A64 Player.TeachWord 02008A63	Life drain
Player.TeachWord 020030D4 Player.TeachWord 020030D6 Player.TeachWord 020030D7	Challenge of Durnevir
Player.TeachWord 02007CB7 Player.TeachWord 02007CB8 Player.TeachWord 02007CB9	Soul tear
Player.TeachWord 0201A162 Player.TeachWord 0201A163 Player.TeachWord 0201A164	Call from Cairn of Souls

Shouts of Skyrim: Dragonborn DLC

Open Shouts of Dragons must be activated with Dragon Souls before use. In the game, Souls are only given for killing dragons. With the help of codes, you can add the necessary Souls to your inventory:

To activate dragon screams, press: "Tab" - "Magic" - "Screams", select a cry, press "R" - "Ok". After that, the selected shout can be used.

TES 5: Skyrim Cheats - Cure Diseases

Player.AddSpell 00092C48	Lycanthropy- a spell to turn into a werewolf. Appears in the "Talents" section. Use the "Z" key to activate. This talent cannot be removed. The reverse transformation into a person will occur automatically, after a certain period of time
Player.AddSpell 000B8780	Vampirism- the disease "Sangvinare Vampiris" appears. 3 days after infection, you have a 10% chance that you will become a vampire. If after 3 days after using this code in the section "Magic" - "Active Effects" appears "Vulnerability to fire" - you are a vampire. If all else fails, use the Player.RemoveSpell 000B8780 command, after which again Player.AddSpell 000B8780
Player.RemoveSpell 000B8780	Get cured of vampirism - the disease "Sangvinare Vampiris". It works only at the first stage of the transformation (after the bite). After a full transformation into a vampire, this code does not work!
SetStage 000EAFD5 10 ResetQuest 000EAFD5	Get rid of vampirism. It can cure any stage of the disease. Healing occurs by completing the quest, so in order to apply the code a second time, you must first reset the quest with the “ResetQuest 000EAFD5” command, then type “SetStage 000EAFD5 10” again. (Save before resetting quests)

Item Codes

TES V: Skyrim Cheats - Standard Inventory Management Commands

Skyrim 5 codes - Codes for gold

The Elder Scrolls V codes - Armor sets (sets)

Daedric Armor Set

Player.AddItem 0001396B 1	armor
Player.AddItem 0001396A 1	boots
Player.AddItem 000D7A8C 1	fire suppression boots +50% fire resistance
Player.AddItem 000D7A8B 1	boots of silence +Silent movement
Player.AddItem 000D7A8A 1	mammoth boots +50 pts load capacity
Player.AddItem 0001396D 1	helmet
Player.AddItem 0001396C 1	gloves
Player.AddItem 0001396E 1	shield
Player.AddItem 000D7AF9 1	ground shield +70% Electricity Resistance
Player.AddItem 000D7AF6 1	heat shield +70% cold resistance
Player.AddItem 0010DFA3 1	shield of denial +22% Magic Resistance

Draconic Shell Armor Set

Draconic Scale Armor Set

Unique armor with bonuses

Player.AddItem 0007C932 1	Robe of the Archmage (armor) + 100% to the speed of recovery of magic; all spells cost 15% less magicka
Player.AddItem 000F9904 1	Scholar's Diadem (helmet) All spells cost less magicka
Player.AddItem 000FC5BF 1	Bloodthirst Tarch (Shield) Shield Bash deals 3 damage. damage over 5 sec.
Player.AddItem 000E41D8 1	"Shield of Ysgramor" +20% magic resistance; +20 pts health
Player.AddItem 000295F3 1	"Helmet of Yngol" +30% cold resistance
Player.AddItem 0002AC61 1	Skin of the Savior (light armor) +50% resistance to poisons and +15% magic
Player.AddItem 00052794 1	"Ebony Mail" (heavy armor) +You move more quietly and enemies that get too close take 5 poison damage per second
Player.AddItem 00045F96 1	Spell Breaker (Shield) +Absorbs up to 50 damage when blocked. spell damage

Masks (helmets) with bonuses

Player.AddItem 00061CB9 1	"Krosis" +20% to hacking, archery and alchemy skills
Player.AddItem 00061C8B 1	Morokei +100% Magicka Recovery Speed
Player.AddItem 00061CA5 1	"Nakrin" + spells of the school of destruction and restoration consume 20% less mana; +50 mana
Player.AddItem 00061CC9 1	"Vokun" + Illusion, Alteration and Affliction spells cost 20% less mana
Player.AddItem 00061CC2 1	"Otar" + resistance to fire, electricity and cold increases
Player.AddItem 00061CC0 1	"Ragot" +70 stamina
Player.AddItem 00061CAB 1	Volsung +20% discount on all products; breathing underwater; +70 weight capacity
Player.AddItem 00061CC1 1	"Khevnorak" + immunity to diseases and poisons
Player.AddItem 00061CCA 1	"Wooden Mask"
Player.AddItem 00061CD6 1	"Konarik" +Gives a chance to heal the wearer and deal damage to nearby enemies when health is low
Player.AddItem 000D2846 1	"Mask of Clavicus Vile" (heavy helmet) +10 Speech. Magicka recovery rate +5%. Favorable prices +20%

The Elder Scrolls 5 codes - Weapon sets

Maces, Axes, axes

Player.AddItem 000139B4 1	Ax
Player.AddItem 0001DDFB 1	Ax of inferno +30 pts fire damage; sets the target on fire
Player.AddItem 0001DFCB 1	Thunderaxe +30 pts electrical damage; takes 15 units. of magic
Player.AddItem 000139B8 1	Mace
Player.AddItem 000139B3 1	battle ax
Player.AddItem 000139BA 1	war hammer
Player.AddItem 0001C4E6 1	"Axe of Sorrow" +Subtracts 20 damage. enemy's stamina
Player.AddItem 000233E3 1	"Mace of Molag Bal" (mace) + Subtracts 25 damage. stamina and magic. Fills a soul gem if the enemy dies within 3 seconds
Player.AddItem 0002ACD2 1	"Volendrang" (two-handed hammer) Takes 50 units. stamina

Player.AddItem 00035369 1	"Staff of Magnus" +Absorbs 20 damage. magic per second, if the enemy has no magic - absorbs health
Player.AddItem 0010076D 1	"Staff of Hevnorak" +Within 30 sec. deals 50 damage. lightning damage per second. applied to the surface
Player.AddItem 000AB704 1	"Staff of Holdir" +Soothes weak enemies for 60 seconds. or captures their souls if they die
Player.AddItem 000E5F43 1	"Staff of Jurik Goldurson" deals 25 damage. damage and takes 50 damage. of magic
Player.AddItem 0006A093 1	"Staff of Tandil" +Creatures and people up to level 12 do not fight for 60 seconds
Player.AddItem 0002AC6F 1	"Wabbajack" + Random effect on every use
Player.AddItem 0001CB36 1	"Rose Sanguine" + Summons a Dremora for 60 seconds
Player.AddItem 00035066 1	"Skull of Corruption" +20 pts damage. Dreams gathered from sleeping humans increase damage to 50

Unique weapons with bonuses

Player.AddItem 000F1AC1 1	"Scourge of Dragons" +40 pts damage to dragons and +10 HP. electricity damage vs all
Player.AddItem 000F5D2D 1	"Pale Blade" +25 pts cold damage; subtract 50 stamina from the target; weaker creatures and humans flee for 30 seconds
Player.AddItem 000956B5 1	"Wutrad" +Especially deadly against elves
Player.AddItem 000B3DFA 1	"Crayon's Eye" +Fire blast deals 40 fire damage. damage in a 4.5 m radius and sets targets on fire
Player.AddItem 000A4DCE 1	"Bloody Spike" +Fills a soul gem if an enemy dies within 3 seconds
Player.AddItem 00053379 1	"Fierce" +15 pts cold damage; takes 15 units. enemy's stamina
Player.AddItem 000F8317 1	"Cooler" +30 pts cold damage; chance to paralyze the target for 2 seconds
Player.AddItem 00094A2B 1	"Phantom Blade" +3 units extra damage by ignoring armor
Player.AddItem 000AB703 1	"Curse of the Red Eagle" +Sets undead level 13 or below on fire and rout for 30 seconds
Player.AddItem 0009FD50 1	"Rage of the Red Eagle" +5 units fire damage and sets the target on fire
Player.AddItem 000B994E 1	"Valdar's Lucky Dagger" +25% Critical Strike Chance

Cheats for the game Skyrim - Accessories

Cheats Skyrim - Consumables: Ingredients, Soul Stones, Potions, Arrows

Soul Stones

Cheats from the game Skyrim 5 - Treasure chests

The game itself provides special cheat chests, which contain all items of a certain type. For example, in one chest are all kinds of staves, in the other - all kinds of arrows.

Notes:

After opening cheat chests, the game can freeze a lot. In this case, you just need to wait no more than 1 minute.

If, after opening such a chest, you don’t look at the items, but immediately take all the contents (the “R” key), then the game freezing can be avoided.

Player.PlaceAtMe	Create a new chest right in front of the hero
Player.PlaceAtMe 000C2CDF	Enchanted Weapon Set
Player.PlaceAtMe 000C2CD7	A set of enchanted armor, jewelry, mage and rogue clothes
Player.PlaceAtMe 000C2CE0	Standard weapon set
Player.PlaceAtMe 000C2CD6	Standard armor set
Player.PlaceAtMe 000C2CDE	Staff set
Player.PlaceAtMe 000C2CD8	A set of armor and jewelry, clothes for a mage and a robber
Player.PlaceAtMe 0010D9FF	Skill book set
Player.PlaceAtMe 000C2CD9	Spell Book Set
Player.PlaceAtMe 000C2D3B	Set of regular books
Player.PlaceAtMe 000C2CD4	Arrow set
Player.PlaceAtMe 000C2CDA	Set of ingredients
Player.PlaceAtMe 000C2CDB	Keys set
Player.PlaceAtMe 000C2CE1	A set of scrolls with spells
Player.PlaceAtMe 000C2CE2	A set of potions, elixirs and tinctures

Skyrim cheat codes - Enchanting (improving) weapons and armor

Enchantment is a skill with which you can independently add magical properties to ordinary objects.

Rules for creating enchanted items:

• You can only upgrade the base item, no other enchantments;
• each item can have no more than 2 enchantments;
• the quality of the enchantment depends on the Enchanting skill;

1. upgrade the Enchantment skill to level 100 - Player.SetAV Enchanting 100.
2. open all enchantment perks (a way to upgrade perks).

There is a cheat code for adding an already finished enchanted item to the inventory. To do this, you need to know the base item code and the enchantment code:

Once enchanted, the item will have a very small charge (170-350). To increase the charge of a weapon, you must pick it up and enter the following code:

Skyrim cheat codes - Legendary weapons and armor

Legendary weapons and armor are standard items, but with significantly improved performance. These things are created by professional blacksmiths (skill level from 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item will be.

What you need to upgrade weapons and armor to legendary quality:

1. blacksmithing level 91+;
2. Workbench;
3. conventional armor or weapons;
4. ingredients to improve (different for all things).

All these things in Skyrim can be obtained in the usual way, but it will take a long time. With the help of cheat codes, this process can be greatly accelerated. Enter the following codes:

1. Player.SetAV Smithing 100- we pump "Blacksmithing" to level 100;
2. Player.PlaceAtMe 000D932F- create a workbench right in front of you;
3. Player.AddItem [number]– add a blank item to the inventory (item codes can be viewed here).
4. In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;
5. Player.AddItem [number]– add the necessary ingredients to the inventory (item codes can be viewed here);
6. We approach the workbench, we improve the item to legendary quality.

TES V: Skyrim codes - How to find the item ID

You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have some unique item, and you want to create several more copies of this item, then you can determine the item code:

Method 1

• Enter the following code in the console: Player.ShowInventory

Note. This method always works, but if you have too many items in your inventory, it may be difficult to find the item you need. In this case, use the second method.

Method 2

1. We put the item whose ID you need to find out in an empty box (barrel, chest, bag or something else).
2. We approach as close as possible to the box (it is desirable to sit down).
3. Open the console, click on the box in which our item lies, enter the command INV.
4. We are looking for the necessary item by name and look at the ID of the item.

Having learned the item code, we use it in a standard cheat to add an item:

Codes for placing objects

Skyrim cheats and codes - Determining the object code

These commands work only when a certain object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, an inscription with the object code (object_ID) will appear in the console.

To scroll through the text in the console, if there is a lot of it, use the "Page Up" and "Page Down" keys.

If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time, it is enough to select only 1 time (the selection is saved).

There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly highlighted instead of the necessary item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.

Objects that are out of view of the screen can only be selected in the console by their game ID code. This is done using the PRID [item code] command.

Skyrim console commands - Placement of objects

For the following commands to work, you must first select the object - open the console and click on the object. After that, an inscription (object ID) should appear in the middle of the console screen.

(All the objects you create have an ID that starts with FF000…)

Notes:

To apply several commands to the same object, you do not need to select it again each time, the selection is saved.

Sometimes, after applying the Setpos and GetAngle commands, the object moves only visually, physically it remains in the same place (the texture is shifted, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable and enable. You can also enter the command Setscale 1 to update the physical model of the item.

To align an incorrectly placed item, enter:

SetAngle x 0, SetAngle y 0, SetAngle z [any number].

Object Management

Cheats from Skyrim - Objects for the home

Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary jobs: alchemy tables, forges, workbenches.

These cheat codes allow you to install jobs anywhere:

Furniture for home

When created, all items appear in front of you in the direction you are facing. To set the item straight, before introducing the cheat, center your gaze so that the character looks straight ahead, and not up or down.

Player.PlaceAtMe 00089A85 1	dummy
Player.PlaceAtMe CC16A 1 Player.PlaceAtMe CC163 1	single door
Player.PlaceAtMe CC164 1	double door
Player.PlaceAtMe B2456 1	dragon head
Player.PlaceAtMe 3FA65 1	elk antler
Player.PlaceAtMe DD9E0 1 Player.PlaceAtMe DD9E1 1 Player.PlaceAtMe CF264 1	moose head
Player.PlaceAtMe D9285 1	crab
Player.PlaceAtMe D9276 1	goat head
Player.PlaceAtMe 3858F 1	fish
Player.PlaceAtMe D928F 1 Player.PlaceAtMe D928D 1	big cat head
Player.PlaceAtMe D9289 1 Player.PlaceAtMe D9288 1	wolf head
Player.PlaceAtMe D9287 1 Player.PlaceAtMe D927D 1	beast head
Player.PlaceAtMe D8282 1 Player.PlaceAtMe D9281 1 Player.PlaceAtMe D927F 1	bear head
Player.PlaceAtMe 93D39 1 Player.PlaceAtMe 93D3B 1 Player.PlaceAtMe 93D3D 1 Player.PlaceAtMe 93D3F 1 Player.PlaceAtMe 93D41 1 Player.PlaceAtMe 93D43 1 Player.PlaceAtMe 93D45 1 Player.PlaceAtMe 93D47 1 Player.PlaceAtMe B7E3E 1 Player.PlaceAtMe B7E40 1 Player.PlaceAtMe BF9CF 1 Player.PlaceAtMe BF9D1 1 Player.PlaceAtMe BF9D3 1 Player.PlaceAtMe BF9D5 1	carpets (square)
Player.PlaceAtMe 95498 1 Player.PlaceAtMe 954A3 1 Player.PlaceAtMe 954A4 1 Player.PlaceAtMe 954A5 1	carpets (round)
Player.PlaceAtMe 5C015 1 Player.PlaceAtMe 5C016 1 Player.PlaceAtMe 5C017 1	animal skins
Player.PlaceAtMe 7EA42 1	wall burning candles
Player.PlaceAtMe 1F24A 1	table candle
Player.PlaceAtMe 5AD5B 1	ceiling lamp
Player.PlaceAtMe 77761 1	light source for illuminating dark rooms (invisible, cannot be selected/moved/deleted after installation)
Player.PlaceAtMe FFF46 1 Player.PlaceAtMe FFF48 1	blue light source

Mannequin Codes:

Codes for fast travel

Help [name part] 0	To find out the exact names of locations, enter the command. (There should be no spaces in the name of the location, and if there are, enter only the first word). In the list that appears, using the console scroll keys "PageUp" and "PageDown", we find the following lines: CELL: location_name (location id). Find out the full name or id of the location.
COC [location_name]	Teleportation to the specified location
COC Qasmoke	Teleportation to a test location. There are all game items and devices for the manufacture of any items.
Player.MoveTo [object code]	Teleport to the specified object (character)
Player.GetPos x Player.GetPos y Player.GetPos z	Find out your current location in coordinates. (You need to enter 3 commands in turn and write down the shown coordinates. After that, you can teleport to this point using the following code)
Player.SetPos x [#] Player.SetPos y [#] Player.SetPos z [#]	Move your character to the specified coordinates. (Do not close the console until you use the command 3 times for each of the coordinates. The movement occurs only after closing the console).
TMM[#]	Enable/disable markers on the world map - remove everything. - show all. - show everything, but without the ability to fast travel

Codes for Friendly Characters (NPCs)

Skyrim cheats - Stop fight with NPC

1. We get up so that at once all the characters who attacked us are visible on the screen.
2. We turn on the console, select each NPC in turn, enter the codes for them:
3. Player.SetCrimeGold 0- turn off the reward for our head;
4. Stop Combat– turn off the aggressive behavior of the character.
5. Only after we turn off the reward for our head for all enemies, we can close the console. (If at least one NPC is not coded, he will start attacking us again, and after him all the other NPCs will become aggressive again. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must definitely apply the code to all) .

These commands do not work on our permanent enemies (monsters and some story characters) who always attack us.

Skyrim cheat codes - NPC customization

Setting the physical properties of the NPC:

GetPos [axis]	Gives the position along the axis (x,y,z)
SetPos [axis] [#]	Gives rotation along the axis (x,y,z)
SetAngle [axis] [#]	Rotates an object along the axis (x,y,z)
Move To Player	Move the NPC to the player character. If you use Player.PlaceAtMe, then a clone of an NPC will be created
Disable	"Turn off" the object. It will remain in the game, but will not be displayed and functional. For complete removal see markfordelete
enable	"Enable" object
Kill	Kill selected target
Resurrect 1	Resurrects the selected target
Reset AI	Restore Default Dialogs - Erase the memory of the selected NPC. This command must be used only if you killed someone, resurrected and after that he refuses to talk to you
SetEssential[#]	Makes an NPC mortal (0) or immortal (1)
Mark For Delete	Delete the selected object or character. Important: using this code, you can remove not only a chest, but also invisible objects that can be selected by clicking on them, and which are necessary for the normal functioning of the game. Be careful when using this command. Objects created by console commands are deleted immediately, while objects present in the game initially are deleted after saving and loading the game. There are no reverse commands. To remove objects from the game, it is recommended to use this command, and not disable, since the latter only hides the item, and does not remove it, as a result of which saves are bloated due to unused objects.

Customization of the personality, characteristics, skills of the NPC:

SetRace	Changes the character's race. There are also ElderRace and ElderRaceVampire values ​​- these races are something like elders, (for example, Esbern is Elder, but he is also a Nord. Greybeards are also included here). Also, if you add Vampire at the end, then the object will become a vampire (example: OrcRaceVampire). Race names: Argonian Race— Argonian, Breton Race— Breton, Dark Elf Race- Dark Elf, Elder Race- Forest Elf, High Elf Race— high elf, Imperial Race— Imperial, KhajiitRace— Khajiit Nord Race— Nord Orc Race— Orc RedguardRace— Redguard.
SetLevel ,,,	Sets the level of an NPC. Enter SetLevel 1000,0,1,81 to make the character evolve with the player's character from level 1 to 81. one) [% ? 10] The percentage of the level to the main character (1000 = 100.0%). 2) How much above or below the level. 3) [initial level] The most initial level of an NPC. 4) [level cap] The maximum level an NPC can evolve to
GetAV [har-ka]	Gets the current value of each variable
ModAV [char] [#]	Adds the specified amount to the value
ForceAV [char] [#]	Sets value to # count
SetAV [char] [#]	Sets the specified amount of the specified value. Unlike modav, it does not add to the value, but sets it
HasPerk	Checks if the character has the given ability.

NPC equipment setup:

INV	Display the entire inventory of an object/NPC
SBM	Displays the trading menu with a character or creature even if it is not a merchant
OpenActorContainer 1	open the inventory of the selected creature. You can exchange items
DuplicateAllitems Player	copy all items from the inventory of the specified NPC or object to your inventory
AddItem[#]	Adds an item to an NPC's inventory. Note: it is useful to add gold to merchants
Equipitem[#]	Equips an item on the selected character.
RemoveAllItems	Removes all items from an object
ResetInventory	Equip the selected character in their original outfit

Setting up movements, NPC relations:

SetRelationshipRank[#]	Changes the relationship of two NPCs to each other. [#] Possible values ​​#: -4 - worst opponents, -3 - enemies, -2 - enemies, -1 - rivals, 0 - acquaintances, 1 - friends, 2 - confidants, 3 - allies, 4 - lovers. All other values ​​are set to 0 (familiar) Note: This code will also work on the player if you type: player.SetRelationshipRank [#]
TDetect	Turn off NPC vision. Theft without consequences. Doesn't work on pickpocketing
TCAI	Enable/disable aggressive actions by characters and creatures. After cast, everyone stops fighting.
TAI	Enable / disable the intelligence of characters and creatures. All the way to moving
Player.SetCrimeGold[#]	Sets a bounty on the head of a player character in a specific faction
Player.SetCrimeGold 0	Cancel the bounty on your head
Stop Combat	End combat with selected friendly character

Skyrim V Cheats - NPC Management

With the help of these cheats, you can take control of any monster or character. Do everything strictly in the specified sequence:

1. Switch to third person view (F key).
2. We approach the desired character or monster, whom we want to move into.
3. Open the console, select a monster with a mouse click, enter the codes:
4. Player.TC- Control the main character
5. TC- Control an NPC or creature
6. We close the console.

Notes:

After gaining control over the NPC, you can only move with it and cannot attack.

If you press attack, then your main character will attack, and not the one under your control. How to make NPCs attack is unknown.

To return to the normal game and take control of your main character, type in the console:

Cheats in the game Skyrim - Companions NPCs

In Skyrim, almost any character can be made your partner so that he follows us and helps in battles. To do this, we do the following:

1. We approach the required character, open the console, click on the character. Let's start typing codes:
2. SetRelationshipRank Player 3– transfer the character to a group of possible allies.
3. AddFac 0005C84D 1- add the necessary dialogue.
4. Close the console, continue the game. We speak with the character, select the dialog that appears: “Follow me. I need your help".

SetRelationshipRank Player 3	Transfer a character to a group of possible allies
AddFac 0005C84D 1	Add NPC dialogue to add him as a partner
Set PlayerFollowerCount to 0	Adds a dialogue for taking new partners. After the introduction of this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, there are no satellites, then this command is useless. The maximum number of partners is 1. There is no point in entering something else instead of 0 - it will not give any effect.
Set PlayerFollowerCount to [#]	Set the number of companions. By setting "0", you can refuse all companions at once

Codes for completing quests

There are a lot of additional quests in Skyrim, which can take several months to complete. Quests are a chain of several tasks (quest stages). With the help of codes, you can quickly go through both individual stages of quests, and quests as a whole.

View codes from Skyrim - Quest Search

How to move to the quest objective:

1. Open the console and enter ShowQuestTargets— get the ID-code of the quest. (Quest IDs, after the introduction of ShowQuestTargets, are located in exactly the same sequence as in the Quest Log).
2. In the resulting list, look for Current quest: , remember this ID. (To scroll through the text in the console, press the "PageUp" and "PageDown" keys).
3. Now we enter MoveToQt to teleport to the quest target.

What are the codes in Skyrim - Passage of the quest

Start Quest	Start quest
Complete Quest	Complete the quest (This command is not recommended, as you won't be able to get the next quest if it's a questline. Use only if you want to complete the quest without being able to progress further).
Reset Quest	Reset all stages of the quest, after which it can be completed again. (In order for this quest to be removed from the Quest Log, you must save and load the game).
CompleteAllObjectives	Mark all quest tasks as completed
SetObjectiveCompleted [stage] [state]	Set all tasks of the quest stage to "completed" (1) or "failed" (0)
SetObjectiveDisplayed [stage] [state]	Set the state of the tasks of the quest stage (0 - disabled, 1 - enabled)
SAQ	Start all quests in the game (may crash the game!)
CAQS	Complete all quests in the game (may crash the game!)

Complete the quest step with the code:

1. We save the game and do not overwrite this save until we complete the quest.
2. Open your list of tasks (key "J"). Select the quest you want to complete and press Enter.
3. Open the console and enter ShowQuestTargets— get the ID-code of the quest.
4. Enter GetStage. The stage of this quest will appear in the console in the following form: GetStage >> [number].00. We remember the number of the current stage of the quest.
5. Enter SQS- we get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 - means that the stage has been passed, 0 - the stage has not yet been completed. In the resulting list, we are looking for our memorized stage of the quest. Remember the number of the next step.
6. Enter SetStage [stage]- set the stage of the quest. As a stage, enter the number of the next stage.
7. Enter MoveToQt- teleportation to the target of the selected task.

We begin to independently pass the next stage of the quest.

Complete the entire quest with the code:

If you complete a quest with the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. At the same time, you will not receive any reward for such a quest.

To receive all the rewards for the quest, you must complete all of its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages in the quest are completed. This is how you can complete any quest 100%.

Other codes

RPG Skyrim Cheats - Graphics, Animation Settings

TFC	Enable/disable free camera
TM	Enable\disable interface
TG	Enable/disable grass
FOV[#]	Change the view camera view from the first person (default: 60-90)
Set TimeScale to [#]	Set game time flow rate (20 - default, 1 - real day, 0 - stop time of day)
Set KillMoveRandom to [#]	Set the probability of finishing animation (50 - default, 100 - maximum, 0 - disable)
Set DecapitationChance to [#]	Set decapitation probability (40 - default, 100 - maximum, 0 - disable)
SW	Changes the weather
FW	Changes the weather to another random

Skyrim codes - Game settings

Solving problems with entering codes

Skyrim codes - Remove squares when entering cheat codes

It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because the letters of the Russian alphabet are entered, and they are not supported in the game console. There are several methods to solve this problem.

Method 1. Switching the font in the game

Press the "Scroll Lock" key to switch the alphabet right in the game. (It doesn't always work!)

Method 2. Change the font

1. We go into the folder with the game, find the file: Skyrim\Data\Interface\fontconfig.txt.
2. In the properties of this file, uncheck the "Read only" checkbox.
3. Open the file, replace the following line:

map "$ConsoleFont" = "Arial" Normal
on the
map "$ConsoleFont" = "FuturaTCYLigCon" Normal

Method 3. Set the English language in the console

If for some reason you can’t remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before that, it is imperative to change the language in the console to English:

1. Go to C:\Users\[username]\Documents\My Games\Skyrim
2. Open the Skyrim.ini file.
3. In the text of the Skyrim.ini file after the lines:

sLanguage=RUSSIAN

add (not replace) the following line:

sConsole=ENGLISH

Method 4 - Set the English Language in the Steam Client

During the game, press the key combination "Shift" + "Tab". Right click on your Steam nickname, click change language, select "EN".

If none of the methods work, and you are the owner of a non-original version of the game, then you should consider looking for another image with the game or purchase the original version.

Method 5. Set the default language to English in the OS

If it is not possible to change the input language using sConsole=ENGLISH, then you need to set the default language to English in the computer's operating system.

Windows XP:

1. Start Menu, Run...
2. Enter text: control international
3. Go to the "Languages" tab, "More ..."
4. Next, find the "Default Input Language", select "English (United States)", "Ok".

Windows 7:

1. Go to "Start", line "Control Panel"
2. In the panel, select "Regional and Language Options", tab "Languages ​​and Keyboards"
3. Select "Change Keyboard..."
4. Find "Default input language" and select "English (United States)", "Ok".

Windows 8:

1. In the lower right corner of the desktop screen, click on the inscription "RUS".
2. In the "Language Settings" menu, select "English. Keyboard layout: USA.
3. Move the selected line to the very top - press the "Up" button.

After that, the codes in Skyrim should display normally.