The layout of individual apartments is always different, as well as the area, and often it applies to the kitchen. Kitchen sizes can be familiar (several squares), but often this room is construed under the studio. Be that as it may, in such kitchens put a bar counter, it not only looks stylish, but also practical - today the few families turn out to be together at the table. And if there is a rack, then you need and bar chairs. How to make a bar stool with your own hands?
Why independently?
Of course, we do not say that you should forget about furniture stores, but instead do all the furniture with your own hands. But if you familiarize yourself with the photos of bar chairs, which can be found in the numerous catalogs of furniture stores, we can conclude: such a chair can really make!
In addition, the furniture items made can become a true decoration of the house, pleasing not only a look, but also the soul.
On a note! In this case, the possibilities are more, since you yourself decide which of the options is better suitable for the interior of the room. Do not once again mention people who love to work with their hands.
We are determined with the design and design
First of all, decide with the sizes of the chair. His height, for example, will depend on the height of the Bar Rack itself. Also remember that your bar stool should be not only attractive, but also convenient, and in all aspects. Only deciding with all this, proceed directly to the design.
In truth, you can start with the appearance, but then it may turn out that in view of ergonomic features, some adjustments are required.
As for the design, then, first of all, decide, so much legs will be at the chair and whether they will be at all. Optimal option - product on four legs. It is simply in the manufacture, convenient and reliable.
Important! The chair with the back will be even more convenient, especially if adding armrests to it. If you plan to sit on such a chair during food meals, then think about the back in advance.
Separate attention to the upholstery (if it is planned). A chair, entirely made of wood, perfectly fit into almost any interior, and after the coating of varnish / paint and in other cases it will also look good.
More about the height of the bar stool
About the creator of the first bar stool is not known. You can only guess that for the first time it appeared at about a while, when instead of ordinary partitions between visitors and the seller, high (1.1-1.3 m) rack tables that have comfortable worktops began to be used. From such racks, visitors of the Petying establishments no longer needed to retrieve. As a result, the usual "Tren -ughter" chair was transformed into the bar stool. For more noble bars, they were made from valuable wood wood, rubberized with leather and cloth; The poor public was content with cheap options. But even despite the practicality and high "height", all the varieties of the bar chairs remained for a long time in the shade due to the unbearable design.
GOST 17524.2-93. Furniture for catering facilities. Functional dimensions of furniture for seating. A download file (click on the link to open the PDF file in a new window).
Everything has changed in the fiftieth-sixties of the last century, when the high chairs have entered the high chairs attracted the attention of large enterprises. Since then, much has changed, today the designs are very diverse: there are models with armrests and without, with backs, spinning and static, soft, with removable pillows and without upholstery ... Changes touched and manufacturing material - now not only wood, but also chrome, Aluminum, plastic. A variety of decor allows it to apply it for all possible stylistic solutions!
Despite all this, when choosing a bar stool, it is its convenience. Due to the center of gravity, which is shifted forward (the visitor opens with elbows on the rack), the support is not the back, namely the footrest. For this reason, the back is more tribute to tradition, rather than an ergonomic condition. As for the landing height, it, as noted earlier, depends on the height of the bar rack, and therefore modern chairs or are produced in two sizes (TH and BH), or equipped with a gas-elevator mechanismThanks to which you can easily adjust the seating height (in the range of 54-85 cm).
Prices for various types of bar chairs
Bar chairs
What tree to choose?
If you plan to make a wooden bar stool, then remember: it will require about 10 ready-made elements. The same applies to the designs made from other materials.
When choosing a material, give preference to wood solid rocks (such as oak, maple, beech). In principle, for self-making, the tree is best suited (although there may be the exceptions that we will talk later) in terms of the ratio of "Effort-Result". Moreover, wooden chairs will look great in the apartment / house.
By selecting the appropriate drawing or making it yourself, all the materials. Everything you need is sold in building supermarkets or business stores, while the parts of the chair can be ordered already ready in the workshop. If you specify the necessary dimensions, you will quickly and inexpensively cut out all the required parts of the structure.
On a note! Details can be more - it all depends on the selected design. May, in addition, add upholstery materials. Also, after assembling the chair, it is recommended to impregnate with the primer (if it is not covered with paint / varnish) to protect against moisture.
But in the manufacture of a metal bar stool, some difficulties will arise. This option is suitable for craftsmen who are accustomed to working with a metal with all the necessary tools and capable of independently do all the details. Additionally, it will be necessary to work welding if the connectors under fastening are not provided.
The wooden product, unlike the metal, is easier to collect - for this you will need a hacksaw, a screwdriver, self-tapping screw and "stacker". Of course, the description is quite superficial, but the difference shows well.
Bar Chair Production Features
Despite the huge number of ideas (both in specialized magazines and on the Internet), the most important thing in all cases is the right dimensions.
The most important thing is the correct measurements.
To begin with, decide what is the height of the chair. It is recommended that it is approximately 35-40 cm from the seat to the countertops. After determining the height, make a drawing or use the ready-made one (select the appropriate option).
On a note! To make the simplest bar stool, you will need 4 legs, as much (preferably) pride and, actually, seat. If a back is planned, the rear legs must be longer somewhere on 30-35 cm (it will serve as the basis for the back).
The error is easy to perform on any of the manufacturing steps - both when preparing parts of the structure and during measurements. Therefore, it is recommended that all measurements are repeatedly rechecked before making a drawing or cut off the unnecessary part.
This will help you already mentioned above the finished drawings, which is more relevant for people, before that did not design anything. Do not hurry, try not "for a tick", but for the result!
Photo example of the manufacture of a bar stool (master class)
Prices for model range of electric drills
NO1 option. Simple Bar Chair from Tree
The first thing you must think - what will be the seat, solid or soft? Not knowing which option to choose, make a solid seat, as in the example described below. In the future, you can at any time be able to cut it with any available material (tissue, leather, etc.). The diagram below shows the design and sizes.
Step 1. For legs, use 5x5x71 cm wood (in our example it is a poplar). Sheets / corners on both ends reduce somewhere on 5 degrees, so that the legs stood under the slope relative to each other. For connections, drilling holes-pockets.
Step 2. Attach the bottom / middle planks, while removing the chamfer (everything is under the same angle of 5 degrees).
Step 3. While creating all parts facing in parallel, start to screw the transverse partitions to one of these sides. First do one side, then the other.
Step 4. During the attachment of partitions, take into account the fact that they should be convenient to put legs during the operation of the bar stool. This is a prerequisite.
Step 5. The seat will have a special shape, thanks to which the chair will come even more comfortable. At the end of the board, which will be used for seating, mark the markup. To get the required form, use the circular saw by adjusting it to different cutting depth; Although it is quite possible to use a conventional saw. First, make the recesses, and then remove the excess wood chisel.
On a note! The process, of course, is quite complicated, and therefore, if there is something better at hand, you can refuse bit. Having finished with this, carefully clean all the surfaces with a grinding machine.
Step 6. In the end, it remains only to connect the legs with the seat. To this end, drill in the upper part of the holes of the hole, the same to do the bottom of the seating, after which, applying glue, put all the parts on the pins.
Surfaces of the finished bar stool read the "sandpaper". If necessary, close the holes with putty. Next can paint the chair or, as an option, cover it with varnish.
Step 7. Everything, a simple bar chairs is ready (and in our example of their three). Such a design is due to the competent placement of perpendicular crossbar, convenient seat and selected height - may well become the most beloved and comfortable place in the house! Would you like to do the same chair? Boldly begin to work, because there is nothing easier!
Option NO2. Bar chair no back with metal legs
Consider the process of manufacturing a simple stool made of walnut (seat) and metal. For the legs used old bed frame. The height of the structure is approximately 64 cm.
A distinctive feature of the option is a form that allows you to easily weld and strengthen the pieces of metal. If you plan to use the welding machine for the first time, during the manufacture of such a chair, you will definitely gain valuable experience and learn how to cook well.
Step 1. Start with creating a form of a future design. Candle the appropriate material (for example, chipboard) into four parts of 54.5x23.2 cm. All items are fixed with side joints by screws, as a result, a square "pipe" 58.5 cm high and 20 cm sides were obtained.
Step 2. Make an angular basis under the shape, using a piece of board with a thickness of 9.5 cm. It is necessary to cut pieces whiskers so that they all come up. To do this, find the appropriate angle using the roulette, and install it, so that everything corresponded. As a result, after cutting, beveled edges.
Prices for the popular model range of end saw
Facial saw
Step 3. Slices with cropped at an angle of 45 degrees edges support around the perimeter of the base part. Crerate a mowed basis using Phaneur and small nails as in the photo below. You do not connect this part with the "pipe", and therefore it can be easily removed if necessary.
Step 4. Thanks to the form made you can easily determine the location of the legs. No changes are required, you only need to attach and place.
First of all, mark and cut the legs below. To facilitate the process you can reduce the corner of the base over the edge of the table, and then mount the iron in place. Then cut off the bottom ends.
After that, place everything in the form and proceed to the layout of the upper ends of the future legs.
Step 5. Use 4 corners for the top of the design. Mark everything you need with the help done before the square. Slices glue with each other, then remove from the form, in order to fit the weld on each side.
Important! Vice, as in the photo, it is better not to put on the tree. Because the bolts, through which everything is attached, can fly out, and everyone will have to redo.
Step 6. Cut out a few more pieces of metal to make a footrest. In our example, the length turned out to be about 30 cm, and the angle is 45 degrees.
Step 7. The support with the foot stand was kept with the upper part of the design and blocks for the supports. Cook all together. We weld the metal lining from the bottom of each leg. Upon completion of the works, sand all the "sandwiche" (recommended graininess - 40).
Step 8. Now the walnut time has come. Cut the main part on 2 thick boards, clean them with sandpaper. For grinding beveled edges, use the "sandpaper" with graininess in the range of 100-220.
Step 9. Treat the frame of the future structure of the primer, after which the black paint. At the end, attach the wooden seat on the holes previously done by means of screws.
Prices for various types of vehicles for wood
Video - Bar chair from wood with their own hands
NO3 option. Wooden Bar Chair with Round Seat
Another wonderful option, but, if compared with the first, much more complicated performed. But first things first.
Step 1. First prepare the necessary sawn timber. The bar is better to use a cross section of 30x30, although in our example 30x40 is used due to the lack of sale suitable. It will cost all this in a well-acceptable amount.
Step 2. Start cutting. Prepare 4 45 cm long bar, another 4 - 57 cm.
Step 3. First of all, take 2 billets from bars by the type "Long-short-long", after which they are in between 2 more shorts between them. By the way, in our example, in addition to clamps, clamps from the circular and the grinding machine are additionally used.
Step 4. From the remains of boards and plywood make the milling box. It is necessary that the hairpin for 8 passes through the entire rack (although it is better to use a larger diameter bolts to minimize vibration). In the example, the hairpin is tightened with nuts; The billet scrolls inside the box with constant tightening nut. Ideally, it is better to make a plumb that turns the blank for 10-15 degrees.
Prices for various types of millions
Step 5. As a result, you will pull out this rack.
Step 6. Start the manufacture of the seat and steps. They will be round, their diameter will be 31 cm. For consumer strength, can glue them out of two shields, placing the lamellas across each other.
Step 7. Cut the ring from the plywood when using the mill. With this ring you will handle the outer edges of the footboard and seats, as well as the inner part of the latter.
Step 8. Like that. Inside the milling was performed on the copy sleeve, and outside the cutter with the bearing.
Step 9. Follow the footboard - in the right place, put the central rack, then circuit the contour.
Step 10. Note in the corner where the transition holes should be done. By the way, the feather drill can "break" a tree; If this happens - you will be forced to put a lot.
Step 11. Thin drill tick the point of passing the tip of the pen. Next, follow the holes of the desired diameter, cut out the logs of the section, and then align all the "sandpaper" on the bar.
Step 12. This is how wood looks like after putting off the breaks left after the feathery drill.
Step 13. Spread the blanks of the legs from bars.
Step 14. Give them a form using a plywood pattern. Act carefully and securely secure the template with nails, otherwise it can disrupt from the workpiece.
Step 15. Pan the crossbar collected on the grooves in the seat.
Step 16. Similar grooves do in the legs to collect them.
Step 17. After milling the edge, let's start assembling.
Step 18. With special care Send the seat.
Step 19. Perform a pre-assembly of a bar stool (without glue) in order to try out the details.
Step 20. Connect all the details of each other.
Step 21. After the final assembly on the glue, apply the veil and varnish. The result you get, be sure to please you!
Table. The cost of making such a bar stool.
On a note! In general, the manufacture of such a chair will cost approximately 1400 rubles.
NO4 option. Metal chic stool
Consider another interesting option for the manufacture of a bar stool. It looks attractive and original.
Metal Bar Chair - Decoration Your Kitchen
Step 1. Draw on a piece of tight sheet of asbestos, which is used for welding prepared in advance (in the photo - red lines).
Step 2. Cut in accordance with the sketch of the workpiece using a 2.5 cm strip.
Step 3. Wellect part of each other, as shown in the photo below.
Step 4. Select the internal layout. Immediately make a reservation that this stage can take a long time. Use the same band for "sashokov".
Step 5. Weld the details, read them. In addition, round the corners.
Step 6. Getting Started for the most responsible case - start welding the legs. Use for this profile 3x2 cm.
Step 8. Initially, the legs grab on 1 welded point, after which we gradually push the required positions.
Step 9. That's what you get as a result.
Step 10. Mark the level on which the stop stops will be located. Sample on yourself, you need to be comfortable. In our example, it is 45 cm from the seating.
Step 11. For the manufacture of stops, use all the same profile 3x2 cm.
Step 12. Perform cute oblique cuts for them, after which you brew.
Prices for popular models of welding machines
Welders
Step 13. On the legs, wear special plastic plugs intended for a steel profile. Although you can, as in the example, make special "heel" from the tree: they will also not scratch the floor, but they can be toldable if necessary to provide a bar stability chair.
Step 14. The part of the plug that will enter the inside of the profile must narrow.
Step 15. Hold such corks will be only on friction. Neither glue nor screws can not be used. Substitute the plugs in size with legs.
Step 16. The rough version of the bar stool is almost ready.
And so the chair will look in the interior.
Step 17. Start painting the product. For a start, apply a layer of primer.
Step 18. Paint black color all that below seats.
Step 19. Protect something black parts of the design. So they do not get dirty when subsequent painting.
Step 20. In our example, such a cardinal color for seating is chosen.
Step 21. Everything, a metal bar stool, made by your own hands, is ready for use!
Video - another version of the metal bar stool
Video - original stool with your own hands
Stock Foto Bar chairs made with their own hands
Bar chairs have become an indispensable attribute to the arrangement of kitchen space.
Now in fashion apartment in Loft style, where kitchens are combined with residential premises, all extra partitions are dismantled. Bar racks are "Rubbroke", denoting the living area, and the place for eating in the kitchen. It is not surprising that such attributes have become a sought-after furniture.
People who love to make their own hands can make a similar simple item independently, especially since technically implement it is easy.
What instruments need?
Here is a standard set of tools, materials and a proper drawing. Such a homemade stool is a product with high legs with a height of about 80 cm, at the bottom there is a special footrest. High stands are very convenient, in the process of seating the legs do not count and do not get tired.
The height may vary depending on the dimensions of the bar counter stand in the kitchen. A person should feel free and not be afraid of losing the center of gravity, despite the fact that the chair is above standard sizes.
We make a model of plywood
Wood - plastic material, easy to handle. You will need tools:
- Bulgarian with a disk of type - "saw";
- Grinder machine;
- Roulette;
- Drill and screws;
- Glue.
- Chisel;
- Screwdriver.
Performance
At the very beginning of work, elements of future wooden legs are peeling out of the wood. The layout in the form of the letter A is applied to the tree, and decorative roundings are made at the intersection points.
The elements of the legs are cut out by the jigsaw on the drawn markings. Thus, the unit is obtained - the future leg support. This is an important binding element: fasteners will be a bit, so the leg support is securely obliged to fasten the supports that must withstand decent loads.
The chair should be durable and not "hang out" at the points of attachment of the nodes. All sections of cuts are treated with a grinding machine.
After the details of the legs are made, it's time to collect supports. Four legs of the legs are thoroughly labeled glue and mounted close to each other. After the glue is freezing, for greater strength in the attachment points, the screws should be wrapped.
Stand for the legs is cut out of plywood. If the thickness of the material is insufficient, then the carved pieces of plywood can be punctured and combined.
The seat is done according to the same technology. A chipped pieces are connected, which are well printed. You can make several layers of plywood, taking into account possible extensive loads.
A special substrate is done under the seat, it must be strong enough, because the legs will be attached to it.
Fastening occurs with the help of screws. When everything dries and will be collected, the stage of the Laco-colorful works will come.
Whole array product
The best option is to make a bar stool from a solid massif:
- Birch;
- Oak;
- Pine.
Birch array is preferable, pine scores not always evenly.
In the manufacture of a chair from a solid array, it is necessary to consider - the thickness of the material must be at least two centimeters.
A circle with a diameter of 370 mm is cut - it will be the future seat. If there is no special woodworking equipment in the house, then the profile is delineated by contour, cuts out, the surface is treated with a grinding machine.
Then the circle is a smaller size of 250 mm - this is a detail that will be a footrest. All elements are also cut out of wood massif, moreover, wood fibers must go along.
Then they are connected with glue, the back is fastened with self-draws. Such attachment is enough that the design is tough and durable. After completing the grinding, it is necessary to carefully cry the resulting item, to cover with several layers of varnish.
Chair made of woody array is heavier, but also more durable. It is easy to stylize under the old days, then he will look very original. In this style you can do not make one product. It will be a long thing to serve a long thing, it is not afraid of the drops of no humidity or temperatures.
Technological flaws of wood
Wooden furniture is in constant demand, but it also has its drawbacks:
- Susceptibility to moisture is the most dangerous factor that is damaging wood;
- The anisotropy of the structure affects the different characteristics of wood fibers located along and across;
- Timber of the fuel and are susceptible to fungal diseases.
If wooden items are present for a long time in the fresh air, for example on a private household veranda, then the likelihood is that they will deteriorate, especially these are products in which Plywood is present.
Metal manufacture, first option
Metal is durable, and products from it are not less elegant than from the tree. Making bar chairs from metal is not of great difficulty. Need appropriate materials and elementary skills in welded business.
Preparation for work is that the corresponding tools are selected first. First of all, you need pipe bending, you can create it with your own hands. On the layout, the bars should be fixed and between them leave the space equal to the diameter of the pipe. Two bars must be a thickness of at least 5 cm.
Pipes are filled with sand, inserted between the bars, and then the operation begins to give them the desired form.
Required tools
You will need:
- Drill and drill;
- Bushings;
- Screws with nuts and bolts;
- Self-tapping screw;
- Cladding;
- Measuring instruments and pencil;
- Paints and primers.
Getting started
Before starting to work, you should draw diagrams to pre-imagine what the item will be at high legs. Samples can be found on the Internet, where there is a huge variety of models; There is also easy to find a description, and even the schemes and drawings. After the model is selected, it will become clear which dimensions will be, begins to create a product in three-dimensional space:
- Made first stencils on a scale of 1: 1, it will become a benchmark for future manufactured workpieces;
- Two pieces of a profile pipe up to two meters are cut off (it will be a future frame);
- The crossbars will also be from the pipe, so the segments in the amount of two pieces of 0.5 meters will be required;
- The rear legs will also be 0.53 m;
- All material is cleaned by sandpaper;
- Pipes are bend in accordance with the specified template.
Installation of parts
In places of fixtures drilled holes. Then the parts are combined together, and iron cylinders are inserted into the openings. After that, the billet is taken, and two pieces are cut out of it in accordance with the template that will be the seat and back.
They are flashing double seam and dress up on a ready-made frame. The legs are attached behind the clips.
For fasteners, you can apply the screws with a size of 5x80 mm for the legs. The seat is screwed to a small circle using 5x40 mm screws. Installing rigid ribs permits to make 5x20 mm self-pressing.
Ribs are installed on the legs with the help of the corners. The thing is ready.
Metal stools, backrest and armrests, which can be durable iron or copper tubes, are increasingly.
If a bar stand is present in the house, then the chairs will be very close to the place. Products made by your own hands can serve a very long time, they are not afraid of either high humidity, nor large mechanical overloads.
Second option
If the idea appeared to create chairs yourself, it is recommended to analyze several algorithms for the manufacture of these simple objects. The second option may be preferable especially for those who know how to use the welding machine.
To start work to prepare the tool:
- Rake width of about 20 cm;
- Metallic profile;
- Scissors;
- Welding machine;
- Sander;
- Sandpaper;
- Line;
- Corolnic;
- Marker;
- Roulette.
In a short time, it is easy to create an original product that can "work" for many years.
Installation
Stencils are made in compliance with the outlined sizes. Reiki is cut off - it's all will be blanks for seats. Strips are welded, as a result, the desired form will appear. Reiki are cut by even smaller stripes, they must fit inside.
From plywood is made stencil, which will serve as a guideline. Thin strips are welded in such a way that the form appears.
It should be seized a blank, rounded the angles. For the manufacture of legs, a cross section profile is used. 3 cm. The part of the required size is cut out of it. The height of the model can be different, depending on the height of the bar counter. Typically, the seat is below the tabletop level 35 cm.
The details made are welded to the frame, then the design will be stable. When everything is set correctly and is checked several times, then you can "grab" welding. Stand for the legs is usually located in forty centimeters from the seat, cut across and weld. The joints are grouped.
Finish
Metal - material hard, mandatory ends of the legs are isolated rubber or wooden nozzles. After the manufacturer of the product comes the finish period: the finished thing is ground and painted.
It makes sense to put several layers of soil and paint, which will guarantee long-term successful operation of the thing.
About how to make bar chairs with your own hands, see the next video.
- Where to begin?
- How to make a concave seat
Make your own hands any piece of furniture is simple enough, you need to have a tool, material and a properly decorated idea. If earlier the bar counter was typically restaurant piece of furniture, now it is part of the kitchen or an open lounge of private houses and cottages. Today it is a fashionable element of home interior, a mandatory addition to which bar chairs are used. Make them yourself will not be much difficulty if you pay attention to the master class submitted below.
Where to begin?
To begin with, it should be determined what is a bar stool. Simple words are a stool at high legs, which can be equipped with a small back. The easiest way to make a bar stool from a tree, while some elements can be replaced with LDSP panels.
For the manufacture of any wooden design, drawings are needed with an exact indication of all product sizes.. They will allow you to prevent errors when working and determine the number of necessary consumables.
How to start and how to make a bar stool with your own hands? To do this, decide on the height of the bar rack. It is necessary to carry out the following calculations:
- Measure the distance from the edge of the Bar Stands to the floor;
- From the size of the sizes, it is necessary to take 350 mm. We get the necessary height of the bar stool.
For wooden options or bar chairs from combined materials, the height of the seat will be on the same level, so you can make a stool from any material and in any design without allowing errors in sizes.
What tools are necessary for work
In order to make the bar chairs with your own hands, the following tools are needed:
- roulette;
- a hammer;
- drill with a set of drilled;
- screwdriver;
- grinding machine or sandpaper;
- electrolovik;
- brush.
Features of the manufacture of chair array
If you want to make a durable and beautiful stool, ideally suitable for your bar counter, then the material for it should choose an array of wood. The most accessible and most suitable for this breed - birch and pine. You can buy them in the form of furniture shields and boards in any specialized store. Material thickness should be 20-30 mm. The master class provides for the manufacture of a torerer in several stages. First of all, it is necessary to cut 10 parts, given the dimensions listed in the drawings:
- the first part is a circle for seating, which should be a thickness of 30 mm and 350 mm in diameter;
- the second detail is a circle serving a substrate under the seat. The diameter of it is 250 mm with a thickness of 20 mm;
- next, four legs are cut out of an array of 30 mm thick;
- the latter cut out 4 strips playing the rigid rigidity role. For their manufacture, the material, 30 mm thick, should also be used.
The legs should be cut in such a way that the wood structure in them is vertical. Otherwise, the strength of the structure will significantly decrease, and it will be unreliable.
When all parts of the tree are filled, you can start assembling the design. This requires the following consumables:
- metal corners through which the ribs of stiffness to the legs will be attached;
- Self-tapping screw, 5x80 mm for fastening the legs between themselves and screw them to a small circle;
- Self-tapping screw, size 5x20 in order to fasten the ribs of stiffness;
- Self-samples, 5x40, through which the seat will be attached to a small circle.
The assembly of the chair is carried out according to the following scheme:
- We fasten the legs with each other by means of screws.
- Install the ribs that are fixed by the corners.
- We screw the small circle to the legs.
- From above, a large circle of seating is installed, which is fastened with a pre-assembled design.
- The finished chair is covered with varnish.
Second version of the Bar Chair
The drawing of this product is somewhat different from the previous one. The design is a classic high stool equipped with several rigid ribs. Despite all the simplicity, such products look very well at home bar racks, they are durable and comfortable.
The rectangular seat of such chairs can be wrapped with a cloth or make a concave, which will become an excellent design solution for a home bar.
As in the previous version, this draft bar stool from the tree begins with the creation of the drawing.
It does not show two crossbars located under the seats to simplify the image. In the present design, they must be present.
Now consider how to make such a wooden chair:
- For legs, four bars are taken, dimensions of 40x40 mm. It will be best to take a pine, birch or. Each leg should have a length of 710 mm.
- We bind 2 legs by installing the upper crossbar. The same should be done with two other legs.
- We set the middle and lower crossbar in the same way.
- Now we collect the overall design from the legs. To do this, attach the two remaining upper crossbars and set the two lower, which will perform the role of footrests.
Do you have a bar rack in your home or apartment, but there are no high chairs for her? The range in stores is not so small, but does not fit into the concept of the living room or kitchen? Nothing wrong! From today's master class you will learn how to make bar chair do it yourself.
Materials for legs of bar stool
The first question that you must put in front of yourself, how will the seat of your chair be soft or solid? If you do not know how best to do this in this case, leave the solid, as we did. If you do not like it, you can hide it at any time - tissue, leather or any other fabricated material. Below you can see the schemes and sizes of our future bar stool.
We start collecting legs
The legs of the chair we make a poplar wood - 5x5 cm, a long 71 cm. In order for the legs of steel under the slope to each other, it is necessary to cut the corners and chamdes on both ends. All connections are made using the technique described in this article.
We attach the middle and lower bar, similarly, at first, removing the chamfer at an angle of 5 degrees.
After you joined the two parts of the chair, which stand in parallel with each other, begin to screw the perpendicular partitions on one of such collected parties - from above and below. First, process one side, then the second.
Attaching partitions you must take into account their placement so that when the chair is ready for you to conveniently put legs on them. This is the bar stool and it should be convenient to sit on it!
Seat manufacturing technology
The special shape of the seat will make your bar chairs even more convenient. First you need to make a markup on one of the ends of the board, which we will use for the manufacture of the seat. To achieve the desired form, you can use a circular saw, adjust it to different depth of cutting, you can use a conventional pylon for this purpose. Cut the deepening, and then cut off the excess tree with the help of chisels.
Of course, this is a rather difficult way to make a deepening and it is possible to use some special tool, but it was not there. After you wrote a bit, you need to clean the surface of the seat with a sandpaper.
Connect the seat and legs
Complete our master class with a compound of the manufactured seat and legs. To do this, drill holes in the top of the legs and the seat below and using the glue to plant everything on the pins.
Clean the sandy paper surface of a new bar stool. If you need to fill the holes with putty, paint at the request of paint, or cover with varnish.
Ready bar stool
That's all, such three handsome, three heroes settled in our living room. Thanks to a selected height, the optimal placement of transverse crossbars and the ergonomic seat, they became the most comfortable and most beloved in our family. Want to do the same? There is nothing easier!
Interesting option to make bath chairs with your own hands
1. Characteristics of the bar stool.
2. Tools and materials.
3. Production sequence.
Bar chairs are a convenient attribute for tables with a height of more than 850 mm. Externally, they can be similar to ordinary stools, but only with elongated legs. The height of the chair should be 300 - 350 mm lower than the level of the table top.
The remaining parameters (width, length, the height of the pride, the presence of the back) are adapted to the user's desires and design of the room. Consider how you can make a bar stool with your own crashes, which, for example, can be purchased in construction stores.
Tools and materials.
To make the presented model, you will need the next set of tools:- - Galnik;
- - roulette;
- - simple pencil;
- - drill;
- - drills with a diameter of 2.5 mm, 3.5 mm;
- - manual milling machine with nozzles;
- - a hammer;
- - screwdriver with a crusade profile;
- - grinding paper with different graininess;
- - vibration grinding machine;
- - Kern;
- - soft brush for painting;
- - stationery knife.
1. Wooden beam for legs, cross section 30 by 40 mm and 600 mm long, in an amount of 4 pcs. (1A, 1B, 1B, 1G).
2. Wooden timber for the Tsarg and prodesk section 30 by 40 mm and a length of 300 mm - 4 pcs. (2); 320 mm - 4 pcs. (3).
3. Bar for connecting elements of the seat, measuring 25 x 30 x 315 mm - 2 pcs. (four).
4. Wooden beam for seats with dimensions of 20 x 40 x 320 mm - 8 pcs. (five).
5. PVA glue.
6. Screws, 80 mm long in the amount of 16 pcs. and 45 mm - 4 pcs.
7. Nails per 1 x 30 mm - 16 pcs.
8. Rag for wiping over glue.
9. Colorless varnish.
10. Felt stands with self-adhesive surface.
To prevent the design of the stool design, all wooden elements are desirable to use without bitch.
In the presented material, the bar stool is assembled from a common tree of wood - pine.
Production sequence.
To make the bar stool with your own hands, you can follow the following sequence:Step 1
Brous, intended for legs, Tsarg, pride, round from all sides using a manual milling machine and an appropriate nozzle.
Step 2.
Using a manual milling machine with the same nozzle as in step 1, round the billets for the seat on one side along the length and width of 40 mm.
Step 3.
Clean all the elements of the stool with sandpaper before the smooth condition of the surface.
Step 4.
On the legs, drill holes with a diameter of 3.5 mm under the fastening of pronosek and the CARG. Their coordinates are shown in Figure 1.
Step 5.
Based on the photo, lean the details to each other and through the holes of the legs, take the place of attachment with self-draws.
To reduce the voltage arising in the process of tightening the fastener in the ends of the parts, drill a deaf hole with a diameter of 2.5 mm and a depth of about 30 mm.
Step 6.
Screws-self-assembly on drilled holes, cover the blanks of the legs, the Tsarg, pride.
Step 7.
On the resulting frame of the chair, unscrew the screws in such a way that they do not come out of the body of the workpiece, but the ends of the part could be melted with glue.
Step 8.
Lubricate the flame ends of the frame and tighten the fastener until its head is placed on the same level with the surface of the bar. Rag, remove the spoked of PVA particles.
Step 8.
To the Tsargam number 2, 40 mm screws, attach a beam with the inner side for fastening the seat so that one side of the bar of 25 mm flush to the king, and in the lower part it was at the same level with it.
Step 9.
Remove the screws from the billet for fastening the seat and squeeze the side of the side adjacent to the stool. Connect these items.
Step 10.
From the side of the seat, apply glue on the support bar (20 x 25 mm) and, setting the seat blanks close, from the first to the eighth, nail them to the support. Carnish heads immerse in the body of the tree. Excess glue Clean the rag.
Step 11.
Clean the surface of the chair from dust. Sharpen potholes in the tree. Clean the sandpaper all the elements. Tassel evenly apply varnish all over the surface of the bar stool. Let the product dry.
Step 12.
When used as a soft sole under the legs of a solid cloth with a self-adhesive film, determine the sizes of the end part of the leg and on the basis of this data, cut the corresponding elements from the specified material.