Parquet - Beautiful decoration for the house, but even the most good and high quality coating comes in disrepair. The renewal or replacement of the boards will cost expensive, and this is not always the owners for pocket. Thanks to this, most decide to sash linoleum from above Coatings that are already outdated. The fact that it is reasonable and what you need to envisage - further in the publication.
Linoleum in the interior
Is it possible to put linoleum from above Parket?
Linoleum is a universal coating that is used in residential buildings and in crowded places. He has a lot of options, thanks to this, put the linoleum on the outdated parquet It is possible under the conditions of execution of all rules.
It must be remembered that this coating is installed on top of a smooth surface. The specifics of the material are such that even a thick look with some periods reveals shortcomings.
An example of laying the web from above parquet
It must be remembered that a fungus creaking or lesions parquet It is not considered an excellent option: it will soon stay and the laid cloth will have to be removed to dismantle the base. Due to this, before any actions you need to make sure that:
- parquet is ventilated;
- not affected by mold or fungus;
- differs or disadvantages of the surface are corrected;
- boards do not creak and do not fail.
If these items do not cause concerns, linoleum is flashed to the floor without preparation work.
What you need to know about linoleum?
- thickness;
- width;
- class.
The thickness range varies from 0.7 to 4.5 mm, but in living conditions there are variations from 1.2 to 1.5 mm. Thick models are used when it is required to ensure noise insulation.
The width is fixed and amounts to:
- 2.5 m;
- 3.5 m;
When the roll width converges in size with one of the walls of the room, it becomes easier the installation process and the surface is beautiful.
Variety of colors
There are three linoleum classes:
- domestic;
- commercial;
- semi-commercial.
The first form has large aesthetic indicators, environmentally friendly and has no substances harmful to health. Not resistant to wear.
A commercial view drives up to ten years, durable, but the price is high.
Semi-commercial species - Combining the first 2nd. It is durable, wear-resistant, owns large artistic indicators and less dangerous to health. The price of such a material is available for the average man.
What linoleum put from above parquet
Before laying linoleum on the parquetIt is necessary to know clearly which requirements to put forward to the coating.
You need to pay your attention! Basically, parquet provides sufficient noise and thermal insulation, however, for a better effect, take the material with a thick substrate. This will strengthen the properties of the parquet, soften the surface.
Following the supermarket, the consumer is obliged to know:
- roll width;
- the thickness of the substrate;
- the size layer for protection.
It is necessary to remember that from the thickness of the cloth resistance to wear does not depend. Affects it thickness layer for protectionThanks to this, the main thing to form with the advantages.
Imitation of parquet
If a linoleum It is laid for a couple of years, and not as a temporary measure, then a wonderful option to focus on wear resistance, and not on softness.
Work on preparation before placing
First of all, the ventilation unit under the parquet is investigated. To do this, raise one board and see whether there are mushroom or other lesions on it. The lack of deficiencies means satisfying ventilation.
If there are traces of lesions, then the coverage that is already outdated is removed. In another case, after some time there will be problems like creaks, poor smell or damage to the facial layer. After the disassembly is done to perform work on surface alignment of the base. You can use self-spoken mixtures.
With favorable indicators, make sure that there are no slots between the boards, there are no chip and noticeable irregularities.
Before covering the floor with linoleum, straighten the boards. To do this, walk the grinding machine or set up some boards with a manual way.
Cracks or noticeable clefts to fix with plaster, plaster or other similar substance.
As the final stage of work on the preparation in the room, the roll with the material is made and if it is possible to decompose. In a similar condition, the coverage is left for the day. After this time, it is acclimatized, it will become soft and scattered.
If not to do this, it is hard to manage with a hard and discontinuitive material, and if we are talking about transferring from a cool room into a warm, then linoleum will also be briskly.
Masonry Paul coatings
When the material accepted the home temperature and broke, proceed to the installation process.
Masonry Any linoleum on parquet is performed by several options:
- glue;
- with plinths;
- nails.
The last method applies more and less often, as it hurts the database.
Glue is one of the common ways. It has a number of positive qualities:
- reliably fixes the cloth;
- eliminates the appearance of waves;
- primitive in application.
During the choice take into account the properties of the parquet and the substrate of the linoleum. Well-selected glue will provide reliable clutch.
You need to pay your attention! Certain types of glue are owned by a strong clutch and when dismantling the coating will damage and parquet. However, aggressive parts of the composition can also be afroat of natural wood.
Cutting excess
Fixation with a plinth is popular, as it does not ask for special costs and simple. The main thing is to crush the coating and only after that press the edge.
If the indoor dimensions are not allowed to put a single web, it is necessary to outline the material in advance, connecting pieces according to the drawing applied. If indoors are required to fix more than 2 paws, then glue is applied.
Help with laying will be able to ask anyone, thanks to this there is no need to ask for the help of professionals.
What you need to remember: disadvantages of the coating
Linoleum -Popular coating, but has a number of special characteristics and minuses, which you need to know before placing.
Decisive:
- it is impossible to penetrate the surface of the coloring substances;
- prevent contact with aggressive washing;
- bringing items leave noticeable damage.
It is necessary to remember about the fact that the cloth, fixed only by the plinths, moving. Thanks to this, drag the heavy furniture very carefully.
A long point effect will leave dents that are hard, if at all possible, remove.
If there is a caustic or coloring substance on the surface, immediately removed until it has eaten.
Thin scratches hide by entering a slightly glue inside damage, but the propalines or noticeable defects are removed by replacing the web or its part.
Laying linoleum with their own hands on Faneur \\ AntiSprip
A parquet coating is capable of listening to many years, but over time it wear out and loses its qualities. The floorboards begin to creak, there may form failures and other defects. There is a dilemma: repair the existing coating or use another method. Repair of parquet will cost quite expensive, in addition, for high-quality gender recovery, you will have to call the masters. But there is an option to simplify and reduce the process, if there is a linoleum on top of the parquet. Tell me in our article how to do it.
How to hold linoleum laying on old parquet
There are rules that you need to adhere to to make high-quality and beautiful work and that the result pleased the eye. The procedure for preliminary measures. Rate the state of parquet.
The following requirements are presented to it:
- availability of ventilation (in order to avoid dampness and other negative phenomena);
- lack of mold and fungal lesions;
- coating defects can be corrected;
- boards do not publish a syringe and do not have failures,
- the dies must lie tightly and firmly.
To view the coating are extracted at 2-3 does, in the middle and next to each wall. When identifying complex and serious damage (rot, the shaft smell, etc.), the floor will have to be dismantled and carefully cleaned. 
Defects can be different sizes of the gap between the boards, they are eliminated by a mixture of sawdust and varnish (either glue). This substance is fill in all the existing flares and leave up to dry. When a screen discovered, it is necessary to remove all the dies emitting the sound. After eliminating the defect, they return to the place.
Parquet irregularities can be corrected using self-discharge mixtures. Or use the plans for these purposes by removing them the protruding edges of the dice. Another option is the leveling of the cyclook, it should be treated with the entire floor. Check the result using a level gauge. Then it should be thoroughly for putty and polish the surface of the boards in places of chips, pits or discover nails.
IMPORTANT. The properties of the linoleum are such that the new coating will not hide the flaws of the old floor.
- Spend a measure of the area of \u200b\u200bthe room, and add a 10 cm approximately to the resulting result, for each side of the room. The indent will allow evenly putting the material.
- The required amount of coating and consumables are purchased.
- Spread the linoleum indoors and leave on one day. It will be softer, smaller and it will be easier to lay it.
ON A NOTE. When delivering the canvas, avoid its deformations, as they are irreversible.
- Cut the edges of the material exactly and accurately. The poor-quality trimming will cause a wrinkling of the canvas and its outlet from under the plinth. Observe the gap between each wall and the coating, it must be at least 10 mm.
Types of laying linoleumum
There are two options for floor finish, depending on the condition of the draft coating:
- using tree fiber plates (can be replaced by plywood or chipboard sheets), the method is suitable for situations with the material that came into disrete;
- with stacking directly to parquet.
When laying off the linoleum, the first way is first putting sheets of plywood (or other material) and screw them with self-draws. The surface prepared in this way is cleaned by sandpaper, removing all small irregularities.
Methods for fixing coverage:
- nails;
- using plinths;
- on adhesive basis.
Molding with nails is considered an outdated way capable of spoiling a base coating. The use of plinths as fixators is the fastest and simple variant of laying linoleum.
It is necessary to comply with the conditions:
- the stacked material should be smooth
- install the plinths only a few weeks after you are beds,
- locks are attached to the wall.
ON A NOTE. The mobility has mobility attacked by plinths, so heavy items should be carried out carefully.
The use of glue guarantees reliability and durability of the coating. His advantages:
- reliable fixation of the material,
- easy to use
- protects from waves.
Operating procedure:
- each part of the coating is sequentially glued to the base, ranging from the wall;
- the edges of the canvases (10 cm) are placed in a mustache (approximately 3-4 cm);
- a few days later, the joints of the joints are attached and then we sample.
As a variety of this method, the so-called "cold welding" is used, It implies the use of adhesive blends on two different bases:
- view A, designed to work with commercial and solid linoleum;
- the view of C, perfectly fixes old, already laid floors with a significant size of the slots due to a thick consistency.
If the size of the room is small (20-30 m 2), it is permissible to glue not the entire surface, but only the edges of the canvas.
IMPORTANT. Pick down the glue, in accordance with the properties of parquet and linoleum. The composition involving aggressive elements can harm coatings.
Is it possible to lower the linoleum over the old parquet?
There are situations that exclude the flooring of a new canvase to the previous coating.
These may be defects that are impossible or very difficult to eliminate:
- Fully rotted base.
- The heights of the height of the floor are large. Linoleum just over time will break through the discovering places.
Laying linoleum on parquet is not such a rare procedure as it may seem at first glance. Indeed, it makes no sense to "explode" parquet to put a new linoleum on it, and thereby cut the precious time spent on repairs. Although, of course, there are also their nuances that will be discussed below. Anyway, but Linoleum laying on parquet is technically similar to laying on the wooden floor. And in fact, and in another case, you can contact our company and the "Master Parket" specialists will hold the flooring on any base quickly and efficiently. We use proven materials and technologies, our masters have a great practical experience of holding any repair work, the prices of the services provided by us are fairly acceptable. Contact our company - save your money and time!
Lining linoleum per parquet can be dictated not only by the desire to save time, but also become an excellent option for additional heat and sound insulation. If small children grow up in the house - this is the most optimal option. This procedure is largely similar to a similar process on the flooring of the parquet on the board, but at the same time has its important features. Most importantly, before proceeding directly to the laying, you need to make sure that the fitness of the old coating to the long service as a basis for the future. That is, you need to make sure that the old parquet does not start spoils that his planks from the bottom did not begin to make sure that there was no characteristic "moldy" smell, shaggy and whether, worse, mold. If at least a few of the ranked items of unsuitability take place, then you should simply resort to the dismantling of the old parquet.
For proper laying, several rules should be performed. Firstly, the linoleum on the old parquet is best to lay not just for the previous base, but to use additionally sheets of DVP, putting them between parquet and directly with linoleum. At the same time, the sheets are fixed with nails or the brackets flush, the holes should be eliminated by mastic or plaster.
If you still decide to lay parquet directly onto a parquet, then for this you need:
align parquet, that is, all the protruding parts of the old parquet cut the lion with the floor;
pre-get rid of squeaks;
consolidate all overlapping boards;
between the boards to close all irregularities, cracks;
clean the old parquet skurt.
After all these preparatory procedures, you can proceed directly to laying linoleum. At the same time, it stacked the same way as an ordinary cement tie.
If your floor covering is simply not happy with the eye, it became old, overly worn out, and the quality of the parquet board would like to have the best, forced to think about how to enter this situation. Of course, you can try to restore the old parquet, if the formed defects are eliminated, and you can put a new parquet coating. But often there is not always homeowners have means for such a repair of floor covering. Then best apply linoleum.
Floor finishing is a durable coating, so it is necessary to approach the choice of material. Linoleum is a durable, practical and inexpensive material.
Very often many homeowners are interested in the question: how to put a linoleum on an uneven parquet surface? It often happens like this: you have a linoleum and an uneven parquet floor, which absolutely do not want to dismantle, and it is necessary to build a masterpiece of construction skills from such a set and without additional investments of funds, and without the involvement of highly paid labor force. It is about this that this will be discussed in the material of this article, because, according to experts, in order to put the linoleum on the old parquet, it is not necessary to make it dismantling.
Preparatory stage
Before embarking on how to put the linoleum on the old floor covering, it is primarily necessary to assess its condition. If necessary, perform partial replacement of parquet dies, make the restoration of its damaged sites, process the parquet to the bioprotective agent. If there are creaking parquetin, they must be removed and eliminated the cause of their screens.
After that, with the help of a construction level, it is necessary to measure the floor level in the horizontal plane, since if there is irregularities, the linoleum will not solve this problem.
Before laying linoleum, put in order parquet. If there is a need to replace the dice.
It should be noted that, laying the linoleum onto the parquet, is required to put a gasket from a special sheet material between them, otherwise the joints of the boards, the place of attachment (screws, nails) will be visible. You can cover the parquet sheets of plywood or tree fiber plates. In the event that the floorboards are slightly bent, it will correctly put the linoleum on such a floor, which is pre-coated with a thicker material.
Before putting the linoleum, it is necessary to make sure that on the entire surface of the parquet, the place of the joints and deepening, formed from nails or self-tapping cops, is carefully covered, after which they are not less conscientious. It should be known that even the most multi-layer linoleum, which has a foamed basis or any other insulation, will not hide the irregularities or defects of the black floor surface.
Spread the linoleum in the room and leave for a day.
After all the preparatory activities were performed, it is possible to put a new coating into the room, and for its acclimatization and alignment, experts recommend to leave it in such a position at least one day.
An important nuance in solving the problem on how to put a linoleum on the old parquet coating is and the way it is transported. Here you need to consider that it is necessary to transport the linoleum only solely in the skated form (roll), it is strictly forbidden to add it, based on the fact that the linoleum is irrevocably deformed.
After the linoleum is acclimatized and leveled, you can begin fitting the edges of the material to the walls of the room.
Direct Linoleum Laying
The edges of the linoleum cut off exactly and accurately, otherwise, with time it can be wrinkled and the edges will come out from under the baseboard.
It needs to be done well enough, because the lifetime of its operation depends on the correctness of the linoleum. Often after a small linoleum service, it is wrinkled - this is the result of its improper cutting. In order for this not happening, the linoleum is necessary with a clearance from a wall of at least 10 mm. The resulting gap is still disguised by the plinth.
The next important point is the fixation of the material strips. Each of the canvases must be sequentially glued to the floor, it is necessary to start from the wall. It should be noted that the edges (10 cm) must be laid on top of each other (by 3-4 cm). A few days later, the docking places with a knife and the iron line are simply cut, after which they are sampled.
There is another method of connecting the canvas - "hot welding", which consists in welding the canvas with the help of a construction dryer with a special nozzle. Thus, a special cord is collapsed into the well-prepared small deepening between the linoleum webs, which is melted under the influence of high temperature and creates a solid connection. As a rule, this method of dusting of linoleum canvases is used when using a solid commercial material.
More often for dusting of household linoleum applies a cold method of welding (cold welding), based on the fact that the temperature in 300-400 ° C, which is used with hot welding, can spoil the cloth. In this method, an adhesive mixture is used for PVC products, which differs from the consistency of its base:
Scheme of cold welding technology of linoleum.
- type A - applies when fixing a commercial or solid new linoleum. Such an adhesive mixture is sufficiently liquid, which allows you to get a bare seam;
- the type C is used for the old, already laining, has a sufficiently thick consistency. This type of adhesive mixture allows you to weld the canvas with more significant slits (up to 4 mm). Upon completion of the process of welding, the kennels will perform surplus on the docking seam, they are removed only after complete hardening of the seam;
- type T - this type of adhesive mixture is usually used in highly professional execution for welding PVC coatings that have the basis of polyester.
Linoleum exists with different thickness - sound insulation and thermal insulation of the floor depends on this indicator. Of course, the appearance of the floor depends on the thickness of the coating, because it is no secret that the thickness of the linoleum is less, the fact that all defects and irregularities of the draft coating will be expired.
Linoleum structure diagram.
If there are no gaps, irregularities and heights between parquet dies on your floor and you have acquired a rather thick coating material (2.2-3.5 mm), in which case it will be quite enough. Having a small room area up to 30 m², such a material is not at all necessary to glue throughout its surface, it will absolutely sufficiently apply glue along the edges of the material (cross-crosswise). But according to experts, the largest of the surface is glued, the better there will be resistance to abrasion.
In the event that if the thickness of your linoleum is less than 2 mm, and the floor is uneven (there are slots, drops in height), in mandatory, the surface is subjected to preliminary alignment. In the presence of a wooden floor or parquet, the alignment of the rough floor lies in the cyclove and further clamp of the slots. As an option for embelling the slots, the dust remains left after the cyclove, it is mixed with glue or epoxy resin. This will ultimately get a great mixture for mailing slots.
It is possible to put the linoleum without the use of adhesive mixture, and use bilateral tape for fixing cloths.
Perform the installation of plinths to the newly laid floor covering is needed not earlier than a few weeks, since only after this time the linoleum can be tightly clouded to the floor. It should be noted that the plinth must be attached only to the wall, since when it fastening it to the surface of the floor through the linoleum, it will certainly "go" the wave, due to the difference in humidity and temperature, the material simply "plays".
If you have no confidence in your own forces or you simply do not have the necessary experience, there are several ways to: seek help to more experienced familiar or use the services of specialists.
Linoleum - How to put a universal coating on the wooden floor in any room.
Linoleum is one of the most sought-after materials, tested by time and convenient in the installation with their own hands. It is distinguished by excellent operational properties and exceeds some similar flooring.
Since the linoleum refers to the number of artificial products, the question arises: whether it is possible to hold it on the wooden floor. If you keep the technology of laying this material correctly, it will not spoil the wood, and will serve for many years.
About the types and types of linoleum
Linoleum can be put on the wooden floor with their own hands. How to execute it is shown on the video repair. However, you need to know which product is suitable for this. There are several types and types of synthetic floor cloths:
- polyvinyl chloride (PVC);
- rubber (relin);
- grifftray;
- colloxiline.
All types of linoleum are multi-layered products. Differ in the component composition of the main layer. They have high heat and noise insulation, moisture resistance. The most plastic rein and colloquiline, grifftale fragile.
The most common - PVC. It is cheaper than other types of this coverage.
Choosing a linoleum for laying on the wooden floor, take into account the type characteristic of the material. It is determined by the presence of the basis. The canvas without her have a black (dark gray) rubber (rubber) bottom layer. Such a coating of a steering room where it is not supposed to walk with barefoot legs and is not required to retain heat on the floor.The following materials are used as the basis for the synthetic floor canvase:
- foamed polyurethane;
- jute (fabric);
- felt.
Linoleum based on perfectly holds heat. The thicker layer of textiles, the more comfortable there will be the legs of those who will walk by this floor. Products based on preferred in residential areas, hotels, kindergartens, etc.
PVC Linoleum - A special type of coating that has its own classification. It can be household, commercial and semi-commercial. The difference is determined by the thickness of the product and purpose (the type of room by the degree of operation). Household - the thinnest and intended for residential rooms. Other two types of stealth in administrative, office buildings with great people's passability. As a rule, these products do not have the foundations, but differ in high strength and wear resistance.
On a wooden floor You can drain any kind of artificial canvases. But preference is worth paying rubber or gryphtaliev based on and without it. These products are produced with the addition of natural components. They are environmentally friendly and safer for human health. Colloxyline material is fireless. In combination with the tree, this property is enhanced: that and the other material is perfectly burning. PVC is a purely synthetic product. It strongly hardening when the temperature decreases, does not allow the tree to "breathe."Video on laying linoleum on wooden floor
Lining linoleum on wooden floor
To properly put the linoleum with your own hands on the wooden floor, it is important to adhere to the general order of working with this material. It consists of 3 points:
- preparation of the base - wooden floor;
- laying and fixation of linoleum;
- finish finish by plinth.
Basis: Research and Preparation
Whole linoleum canvas can be kept with their own hands on a wooden floor that has no flaws. The good condition of the board base is determined by a number of indicators:
- the integrity of the boards (no rotten and damaged fragments);
- lack of cracks, gaps between the boards;
- lack of screenshots, other extraneous sounds
- lack of deflection, protruding parts, discover the nails (self-tapping gear).
If the wooden floor does not have serious defects, it is enough to remove the layer of old paint and polish the surface. After that, wood is ground and impregnated with a composition that protects the tree from rotting, injuries to insects.
Some masters advise paint not to count. With well-preserved boards, it becomes a means that protect them from harmful effects under linoleum.
If there are defects, they should be identified and eliminated before the linoleum flooring on the wooden floor surface. How to properly implement, will show an informative video.
- When several rotten, damaged boards are detected, you can safely remove them and put the new same thickness. If almost everything is spoiled, it is removed and new floorings are removed:
A) the concrete basis (slab) is placed at a distance of 40-50 cm. It performs the function of the lag. The thickness of the bar corresponds with the parameters of the room height. It is necessary to be prepared for the fact that the floor is raised, and the ceiling "drops". It is not necessary to take thick lags. The boards of 50 mm thick can cope with their role;
B) on top of the tightly put new floorboards, leaving the gap (1-1.5 cm) along the walls. The material is attached to the bars with nails or self-drawing. Their caps are completely combed in wood. The recesses close up with a woodcut on a tree or mounting foam. After drying the mixture, the plot is cleaned;
C) I don't need to do anything with grip-boards, but it is necessary to go through the non-corrupt and the cycular machine. This will further conduct the level alignment;
D) new floorboards are soaked with protective means. Under linoleum do this must be necessary;
E) In some cases, under construction or waterproofing canvas are placed under artificial finishing. Here you should focus on your own preferences and individual features of the room. For example, in the bathroom, in the kitchen there will be no excessive waterproofing.- When, the cracks of the board are narrowed with each other, and the gaps are filled with thin wooden inserts or mounting foam (splock, adhesive harness).
- Any protrusions are equalized by electrical instruments. Hats fasteners are taken into a tree and masked by a construction mixture.
The main requirement for the preparation of the wooden floor for linoleum is to make it completely even and smooth. Even a minor defect will result in premature damage to the coating. So that this does not happen, use Phaneur, chipboard, OSB. With their help, you can make the perfect base for laying linoleum.
Phaneur, chipboard, OSB. Fasten to lags or old renovated boards. When fixing, leave the minimum clearance between sheets. These products are made from wood waste, so they also have the degree of expansion and mobility.
How to put linoleum do it yourself
To perform work tools use tools:
- acute knife;
- a spatula with a toothed edge for glue;
- rubber roller;
- roulette;
- scotch bilateral;
- means for welding seams (as needed).
Linoleum manufacturers make everything for the convenience of consumers. Top points sell products of standard formats. If you wish, you can purchase a solid canvas in the size of the room. Then it will not be necessary to cut it on your own and cut.
In order to properly put the linoleum on the wooden floor, it is entered into the room, unfold over the entire surface, give him a few days to straighten and adapt to the conditions of space. Tolstoy linoleum and material based on a little more time to fully dealt.
The cutting of the solid linen of the linoleum is carried out on the spot or according to the drawing composed of the geometry of the room. If the room has difficult outlines, it is better to make a sketch and cut the necessary coating on it. When stripping, the web must be allowed to leave 0.5-1 cm on the subsequent shrinkage.
Create linoleum on wooden boards can be in different ways (video tells about it):
- with glue. Use a special composition for fixing artificial products. The canvas twist, the glue is applied with a spatula into a small section of the floor, apply a canvas and pressed it with a roller. So gradually fasten all the material;
- on scotch. At the edges of the linoleum from the wrong side, stick the adhesive tape and the canvas are fixed to it. At the same time, gently lay it on the surface;
- plinth. The product is spread on the floor, give it to be seal and fixed by the plinth, which is attached to the wall and wooden boards.
The most reliable method of gluing. Linoleum fits tightly to the base, not deformed, retains operational properties longer.Views: 6 738
Wooden floors in Khrushchev - Repair and Restoration
Uneven wooden floors - floor alignment GVL (Hypus fiber sheets) on wooden floors How to make wooden floors in a private house
How to lay chipboard on the floor, lay a chipboard on wooden floors