Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to begin construction.

The main part of the project is the architectural and design partitions. If the customer is exactly sure that in the construction team there will be explanatory specialists in engineering networks, then from the development of this part of the project in a specialized company you can refuse. But it is necessary to understand that the architect, the designer and engineer work on the project together and such moments, such as, for example, shoes and openings in the walls for laying pipes and wires, are provided in advance.

Engineering part of the project is divided into several parts

• Water supply and sewage (VC)

1. water supply scheme
2. channelization scheme
3. general view of the system.

Before proceeding with the design, it is necessary to determine which communication will be individual or connected to the centralized system.

Individual water supply gives complete independence from external conditions. But it must be remembered that your own water sources will need, and the drilling of the well will cost a decent amount.

Connecting to a centralized system will require the development of a project in accordance with the specifications of the existing network and obtaining permission to the insert.

When the sewage is connected to the centralized system, the work order is the same as when the water supply is connected: the request for the relevant service, the development of the project, obtaining permission to the insert into the system. If you decide to organize an individual sewer system, then from time to time you have to invite an arbitrary service.

• Heating and ventilation (s)

1. heating Scheme: Calculation of the required power capacity, Heat distribution schemes, Location of pipes and radiators
2. ventilation scheme: binding to power electrical equipment, ventilation communications and mines, passing nodes and, if necessary, placement of furnaces and fireplaces
3. boiler strapping (if necessary)
4. general instructions and recommendations on the section.

If the ventilation system is always an individual design, then heating can be both individual (furnace, air, water, electric) and connected to centralized networks.

• Power supply (ETR)

1. lighting wiring
2. wiring of power networks
3. scheme of hand
4. system for grounding
5. detailed description and characteristics of all system elements.

Electrical systems can be divided into mandatory and optional. The obligatory includes internal and outdoor lighting, ventilation, air conditioning and electrical installation systems. Additional systems such as "warm floor" or automated gate control can be attributed.

IMPORTANT

• In each of the parts of the engineering section of the project, general and technical descriptions, specifications of materials and the necessary equipment should be included.
• The drawings of the elements of all systems and the floor electrical layout are performed on a 1: 100 scale.

Price: from 100 rubles. for m²

Package "Engineering Networks"

Package "Engineering Networks"

The project of engineering networks will allow competently paving the communications and make the house for truly comfortable and modern.

• Price: from 100 rubles. for m²

Amendments to the project

Often, the customer faces the question: choose a typical project of the house and save, having lost at the same time on the originality of the future housing, or order an individual project, but for big money.

Our company offers a compromise option. You order a typical project, and we make changes to it, considering all your wishes as much as possible. Of course, this implies additional costs, but, in any case, such a project will cost much cheaper than work for a specific order. And so that your home look original, we will take care.

In the project of the house you can make such changes:

transfer wall partitions. But only if they are not carriers. Such an operation will allow you to change the size and purpose of the rooms.

transferring window and doorways will allow you to change the lighting of the rooms and organize convenient access to the premises you need.

changing the type of overlaps and walls will allow you to fully implement our own ideas about economical and rational housing

change the height of the ceilings. Although all of our homes are designed with the optimal height of rooms 2.8 m, some customers believe that high ceilings are extra comfort and comfort.

re-equipment of attic under residential premises will give you the opportunity to expand your own living space

change the angle of inclination of the roof and canopies worth considering the climatic conditions of a particular region

change the type of foundation is necessary, given the engineering and geological parameters of the soil. There is also the opportunity to add or change the basement or the ground floor

add, remove, change the garage or terrace, you can, confirming with your ideas about the functionality of housing

changing the constructive composition, construction and finishing materials will allow you to save our own financial resources.

the project in mirror mapping will allow organically to enter a house to the surrounding landscape.

Changes made should not affect the safety of the house.

Too much changes, as a rule, do not improve the project. If you could not choose a suitable home in the directories, then it may be worth ordering a housing for an individual project from an architect.

Price: from 2000 rubles.

Amendments to the project

Amendments to the project

House built by typical project may look original

• Price: from 2 000 rub.

BIMX model

We keep up with the times and today we offer you the opportunity to get along with project documentation BIMX Model - based on technology that provides simultaneous navigation of 2D documentation and 3D buildings models.

Now you can "twist, get into, see your future house from all sides." See all sizes and heights, specification of openings and so on. You will receive a file that will be your reliable, convenient assistant to control the construction.

* File you get electronically and use using the BIMX application on Apple and Android mobile devices

The Bimx app is available free of charge in Play Market, App Store

Demonstration Bimx

BIMX model

BIMX model

BIMX Model - Interactive viewing of the three-dimensional model of your home. Now you can "twist, walk inside, see your future house from all sides."

• Price 10 500 rubles.

Package "Foundation Adaptation"

When a typical project project is being developed, some averaged soil parameters are taken as the basis. But, without having accurate data of geological expertise, it is difficult to consider all the nuances in design. Therefore, often engineering-geological characteristics of the real area differ significantly from the originally stated in the project. And this means that the foundation is the basis of the whole house - it will be necessary to finalize so that it turns out strong and reliable.

To completely eliminate all problems when booking the foundation, the specialists of our company developed a package "Foundation Adaptation". When implementing the package, not only the technical characteristics, but also the wishes of the customer are taken into account.

Such a package includes:

• choosing a type of foundation
• calculation of technical parameters:

Depth of the basement of the foundation
- load bearing capacity
- Indicators of soil voltage under the foundation
- area of \u200b\u200bcross section of working fittings, so on.

• detailed zero cycle drawings
• the statement of the cost of building materials.

The foundation adaptation gives a complete guarantee of its strength, which means the reliability of the whole building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of a ready-made home. Moreover, often the adapted foundation is cheaper than the option originally laid down in the project. And this will help save materials and financial resources.

Price: 14 000 rub.

Package "Foundation Adaptation"

Package "Foundation Adaptation"

Carefully prepared foundation project - strong and reliable house

• Price 14,000 rubles.

Individual design

If you decide to build a house, then you have your own idea of \u200b\u200bhow your dream dwelling should be. And if none of the typical projects are suitable for you, it makes sense to think about an individual project. In addition, all your wishes will be asked as much as possible: the level of comfort, the composition of the family, even the view from the window. It is clear that such a project will no longer. But you will know exactly that there is no such thing.
Sometimes, however, you have to resort to individual design forced. For example, it got to the developer of the land plot of non-standard configuration, and no type project simply fits into it. And it happens that the number of changes made by the customer is that it is easier and cheaper to design a house with a clean sheet.

Stages of work on an individual project:

• development of technical task for home design
• project work agreement
• preparation of a draft design: binding of the building to the terrain, external and inner species, planning, cuts
• detailed study of project sections.

In addition, you can also order:

• projects of additional buildings - garage, workshop, bath, etc.
• visualization of the project in 3D format.

Ultimately, the customer receives a project documentation package consisting of architectural and constructive sections.

The project presents:

• The general plan of the house with reference to it to the borders of the site.
• Foot plans in which the thickness of the walls, jumpers and partitions, the area of \u200b\u200bthe premises, the specification of windows and doorways are indicated.
• Facade plans indicating finishing materials and color solutions.
• Cuts of buildings and main nodes.
• Drawings and cuts of the foundation, the statement of the consumption of materials.
• Calculation of overlapping, rafter system of roofing, insulation nodes and waterproofing of the roof.

You can decide on the style of the future home in the "Individual Design" directory.

Price: from 450 rubles. / m²

Individual design

Individual design

Implement your individuality with an individual project!

• Price: from 450 rubles. / m²

Package "Tender Offer"

For any developer, a question from a funny children's poem "What should we build a house ...?" Far not idle. Especially since the cost of building the house depends on the set of factors. Therefore, you should not estimate the costs of "peephole". Without possessing full information, it will not work out everything to the smallest detail and, ultimately, it will be more expensive. And, moreover, the careful miscalculation of the value of materials and works does not affect your finance, but also on the time of construction of the house.

It is possible to accurately calculate the cost of construction. You will be able to use the "Tender Offer" service developed by our specialists. In essence, this is a document that provides a complete list of all building materials and works indicating their volumes.

The presence of the tender offer allows:

• get a real picture of the cost of the upcoming construction
• attract a construction company that is able to offer the most favorable conditions for the performance of work.
• not only to understand the essence of the building process, but also with knowledge of the case to control the consumption of building materials, independently adjusting prices for each item
• competently control the actions of contractors at all stages of construction

the tender proposal, supported by information on the cost of materials and construction work, is a serious argument to receive credit funds.

Package "Tender Offer"

Tender offer:

Order a detailed estimate. Build with benefits for yourself!

• Price 10 500 rubles.

Package "Anail"

Summer and ice in winter on the roof of your home deliver a lot of trouble. You can, of course, climb on the roof and wave a shovel in frost 2-3 hours - business. But the effective systems of snowy and anti-change have long been invented and widely applied. Their base is heating cables. The system is organized by the same principle as "warm floor". Only a more powerful and cable laying step is less.

The "Anail" package is developed taking into account the characteristics of the energy supply of the house:

for roofs and drains: snowstown in the chutes, on the edge of the roof in order to prevent the formation of icicles and flooding in the pipes

for the entrance group: heated steps, tracks and open areas

for the entrance to the garage: heated access roads

in addition, sometimes the "antiy" system is used to heal the soil in greenhouses, and for landscape heating of flower, lawns and lungs, as well as for heating sports facilities.

In the process of design, the minimum power consumption is calculated and fire safety is ensured. When creating an "Anail" system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with a disconnection device when overheating or a differential machine for automatically disconnecting the system when energy travelery is detected. If the system turns out too big, it is broken into smaller sections. It is easier to manage her work.

Important:

for a multi-sighted roof, the "Anail" system of our company will descend by individual order.

Price: 4500 rub.

Package "Anail"

Package "Anail"

Your comfort and safety in winter

• Price 4 500 rub.

Package "Lightning protection"

Often, developers do not attach great importance to protect their own houses from lightning: someone saves someone, someone hopes for "maybe". But after 3-4 years after the construction of the house, many remember the protection against lightning. Toli at the neighbor in a thunderstorms were grown by all appliances, stats on how many fires occurred for the year during the year.

We propose to solve the issue at once: to provide protection already at the design stage of the house. It is worth thinking about this at least from purely aesthetic considerations - it will not be necessary to immediately break the walls of the house and pull the current in the facade, which disrupt the thoughtful appearance of the building.

Protection of the house from lightning is a system of devices located both outside the house and indoors. External lightning protection warns lightning in the house, internal - ensures the protection of the power grid from sharp voltage jumps. And special devices protect electrical engineers from sharp changes in the electromagnetic field in a radius of lightning strike.

In the package "Lightning protection" includes

• plan-scheme of the location of lightning parameters that make up straight blows of lightning
• claiming scheme, reducing current from lightning memory to grounding
• scheme of the grounding circuit that distributes lightning energy in the soil, providing full safety
• averaged resistance calculations
• detailed list of essential materials
• recommendations for project implementation.

The DOM4M lighting protection package guarantees you to save at home even in the most severe thunderstorm.

Package "Lightning protection"

Package "Lightning protection"

Lightning protection: Think about safety in advance

• Price 3 100 rub.

Package "Central Vacuum Cleaner"

"Central Vacuum Cleaner" is a kind of aspiration system(Removing small particles by sucking them with air flow).

The system consists of:

• a vacuum cleaner (installed in the technical room);
• air duct systemwhich moves the dust-air mass (more often the hidden installation is carried out in the preparation of the floor or in space behind the tail ceiling);
• pneummators and Pneumoshovka (The first flexible hose with a telescopic barbell and nozzle is connected, as in the usual vacuum cleaner, the second is designed for express cleaning, as a rule, in the kitchen).

Pros:

• removed dusty air does not fall back room, and "throws out" after the unit to the street;
• No noise In the removed premises.
• Easy cleaning Without the "tightening" of the vacuum cleaner from the room to the room, without the use of extension cords.
• Hidden mounting Systems, there is nothing in the room except pneumators.

Project price: from 3100 rubles.

Package "Central Vacuum Cleaner"

Package "Central Vacuum Cleaner"

"An integral part of the modern house - Comfort, Cleanliness and Fresh Air"

• Project price: from 3 100 rubles.

Package "Comfortable House"

Intelligent dictionaries argue that comfort is a totality of household amenities, without which life is unthinkable.
modern man in a modern house. Most of such amenities are laid at the design stage. But we are ready to expand their list and help customers make their own accommodation as comfortable as possible.

Therefore, our DOM4M company has developed a package "comfortable house" for you, which will make it a coolest home on a hot summer day, and in the winter cold - cozy and warm.

The package "Comfortable House" includes

• Project "Heart Paul". This is a modern home heating technology. It can be used by connecting both to the local, and to the centralized heating system. In addition, heated floors can be both the main and an additional source of heat in the room. The main advantage of the system is that it creates uniform thermal regime, does not dry the air and at the same time organically fits into any interior.
• Draft ventilation system with recovery. Unlike traditional systems, ventilation with recovery makes it possible to save considerable means during operation. The essence of the system is that the exhaust air passing through the recuperator, gives its heat, cold flow coming from the street. All ingenious simply. Such a system allows you to reduce the cost of heating at times. Savings comes up to 80%. And, in addition, the load on the network is reduced. In the summer, with the help of a ventilation system with recovery, warm air from the street can be cooled. And here you already get savings from reducing energy consumption during the air conditioning at home.
• Project of the air conditioning system. Such a project offers you to choose a channel air conditioner with the distribution of air flows on the room or multi-split system that allows you to connect several internal units to the external unit.

The country house should be comfortable, preferably large and, of course, have an attractive appearance. Sometimes it is possible to reflect the structure in the country, making redevelopment or, modern facade cladding. Mansard with a balcony - one of the options for such an extension. This is a great way to increase the residential area of \u200b\u200bthe private house. Basically, the equipment of the attic room is carried out in the same way as for ordinary floors. However, deciding to attach to the attic of the balcony, you need to know some subtleties. Work can take a certain amount of time and strength, but the result will please you. The height of the location of such a balcony will allow the owners to enjoy a beautiful view, which is especially important if the house goes to the sea, river or forest. Such a roof terrace can become an excellent room for recreation.

There are several embodiments of an attic balcony. Technologies are somewhat different, and the appointment in such structures is different. Each of them looks peculiar on the background of the building.

One of the typical types of extension is attic with a balcony located on the front. Such a balcony is made in the construction process. It can be arranged with a protrusion in relation to the wall or the end, which will be in the same plane. There is a simpler extension option.

This is the displacement of the fronton to a certain depth of the external wall of the house.

Appearance of attic with a balcony on the front

Thus, the place is released for the location of the balcony. The fronton should move to the depth of the attached balcony. Consequently, part of the structure between the bottom and attic floors will perform the function of the floor on the balcony, and the roofing edge of the front of the front is a carport. In such a type of construction, the balcony width must correspond to the width of the building, as in the case of the joining of the loggia.

In order to avoid heat loss through the open area of \u200b\u200bthe inter-storey overlap, it is necessary to insulate the floor on the balcony, make a screed, waterproofing. The mansard fronton should also be insulated, since the attic room is experiencing a stronger effect of temperatures.

The wall between the attic and the balcony does not need to do thick. Otherwise, an increased load is created on the overlap in the absence of a supporting wall. Moreover, the partition will not be part of the roof carrier design.

It is also necessary to think out from which materials to construct parapet. The fencing on the balcony is primarily necessary for the safety of tenants, and it also performs a decorative function. The railing must be harmoniously combined with the appearance of your private house. Everything in this case depends on the construction. Sometimes it is advisable to make a metal fence, and sometimes a stone or lined parapet with bricks is better.

Roofing balcony on attic

If you are interested in how to make a balcony on the attic directly in the roof, remember that for the construction of such a balcony, the lunet is formed in the width of the planned structure.

Roofing balcony in a private house

The opening should be high enough for free passage. From the line in the upper part of the opening perpendicularly, the overlapping is installed. It will be a doorway to enter the balcony from the attitude of the attic. Between the roof and the wall, there will be an open area of \u200b\u200bthe mansard. This site will become a balcony floor. Triangular openings on the sides need to lay a stone or brick. It is important to carefully treat all the joints, lay a sealing material, make insulation. After that, parapet is installed.

Sometimes it is made of metal. Mainly in cases where the balcony design in its lower part is extended for a certain distance from the plane of the roof. The concrete slab with which the removal is carried out, should be well strengthened.

Balcony mansard window

This is a kind of system that can perform the functions of the window installed in the roof, and also easily transform into a balcony in the attic.

The uniqueness of such a design provides the specificity of its device. Opening both sash windows, you convert it to a balcony on the attic, photos of such systems are presented in the gallery of this article.

Appearance of the attic window-balcony

The upper part when installing in a horizontal position turns into a canopy, and the lower one, which is vertically, replaces the fence.

At the same time, both flaps are fixed at any angle. You can also just close them. When you close the balcony, its railing is automatically folded inside the window, so that they are not noticeable, and the appearance of the design did not deteriorate.

Such a window provides for the functions of damping attic. To do this, you just need to open the upper door.

As a rule, such structures are equipped with special fittings. It should be high quality, because its purpose is to protect the attic room from hacking. For example, it is important that the hinges on the lower flap were strong. Details and connecting elements by which the door is fixed at a certain angle should also be durable. The opening system is peculiar. This is a combined door design: on the central axis it is medium-speed, and on top - suspended.

In order for the windows-balcony windows and in the indoors at the indoors, there was a condensate, such a window system for attic to equip special.

It should be borne in mind that when installing such a window, a special heat insulating bust design is usually included in the package.

Mansard as a residential premises

Today there is a large selection of building materials, so the country house with an attic and a balcony is no longer just a dream for many people, but a completely real project. To turn the cutting into a cozy and comfortable corner, you need to take into account certain points. First of all, the appearance of the dwelling will depend on the shape of the roof of the building. So, in structures from the forcep blood ceiling as such is missing. The walls in this case are bevelled and are located at a certain angle relative to each other. The hollow roof provides the designer more opportunities for creativity. The broken shape of the roof involves the presence of normal walls and allows you to easily arrange furniture.

Attic with a balcony with his own hands, a photo of the design examples of which are presented in the gallery of this article, will add a highlight to the general architectural style of the house.

Recreation area indoors

To equip a full-fledged living room in the attic, and all the necessary communications should be carried out, take care of the ventilation of the room.

Bathroom equipment on attic

As a rule, this is not the most common location of the bathroom. However, the well-thought-out holding of engineering communications and plumbing will avoid problems with the arrangement of such a premises.

Bathroom in mansard indoors

This condition is mandatory to redevelop the attic of the attic under the bantane roof. This type of roof design creates inconvenience when placing furniture and in pipe laying.

It is advisable to install the bath or shower room either in the center of the room or on a special podium with steps. Sometimes it is appropriate to install a bath or shower in the corner. Toilet - at the inclined low wall.

For interior decorations, it is better to use waterproof and resistant to the appearance of mold fungus materials. It can be a tile, acrylic or nitrocracy, plastic panels.

Individually designed furniture to order successfully completes the creation of the interior.

Sleep room or living room

Traditionally, on the upper floors, it is customary to place a bedroom. However, the presence of a terrace in the attic will allow an excellent living room there.

For the decor of the walls, any materials are ideal, preferably light shades. Such a solution will allow to visually expand the space, add air. It will be the use of a mirror tile or just large mirrors. Windows is better to curtain light tulle. Covered use from lungs and natural fabrics.

When arranged furniture, you need to be guided by the following principle: the lower the object is located, the better.

Arrangement of the living room on the attic

Appearance of attic with a balcony on the front Roofing balcony in a private house

The roof is a successful combination of two useful functions at once. The first is the exterior aesthetics of the house, expressed in the original design. The second is a noticeable expansion of residential space due to the design features of the roof. Let's see what kinds there are attics, what is the complexity of their construction, and find out at what stage of construction it is necessary to think about the interior of the attic room.

The practical purpose of the attic is to make an ordinary attic functional room where you can comfortably live. To build roofs of this type, you can use different types of roofs:

• metal tile of aluminum or steel. The material happens different geometric shapes, thickness and colors. Stalling tolerates any climate and weather phenomena, not deformed (withstands the stroke of the snow, flash);
• glass. Fully glass roof make rarely. Such roofs are not suitable for a cold climate, more often they are erected in southern latitudes. Require the development of a detailed project and strict load calculation;
• Sip panels. Based on the material - pressed wood chips and polystyrene foam, which in combination gives a low load on the design and an excellent heat-insulating effect;
• professional flooring. Reliable in operation, is distinguished by the available price, due to which it became the most popular coating for the roof. It is a metal sheet with a polymer surface, which is released in different colors.

Choose the coating material for the house with the attic roof is necessary at the design stage, since the main load on the bearing structures or rafters depends on the type of roof.

The peculiarity of such a roof consists in one inclined plane, which rests on the rafter system. The optimal inclination angle is kept from 5 ° to 40 °, depending on the roof material (soft / hard), which ensures the timely gathering of snow or raindrops from the coating.

Installation involves a detailed calculation of the load on the rafted and the carrier wall, which in a single plank attacks the maximum load. These parameters are determined depending on the length of the spans and the height of the room.

A single-piece roof is great for single-storey houses, where a compact attic is possible without having to "re-equip" into a cozy and warm room (for example, under storing things or a small bedroom).

The option of the roof with two slots makes the height of the ceiling uniform for the larger area of \u200b\u200bthe room. Both sides are kept under the same angle of inclination, which is determined depending on the size of the room (for example, for a 6-meter width angle is 45 °).

A bantal attic allows you to build a two-storey house with a balcony, which is more often located on the end of the construction. Thanks to the standard roof with two slopes, the useful space is increasing inside the attic, and you can build this design yourself according to the drawings.

The main thing is to make accurate measurement of all parts and correctly mount the roofing "pie". Between the coating and rafters, it is necessary to put steam and waterproofing, a layer of insulation. For this type of roofs, any type of material is suitable (from a soft roof to professional flooring).

Duscate roof design is suitable for building a house with a garage. In technical terms, this is the easiest kind of attic, where the roofing coating from the slide part smoothly passes into the genuine roof of the garage. Skates in such projects make multi-level, where the big side captures the garage building.

The broken format makes it possible to allow the angle of inclination less, and the height of the walls increases, in order to obtain the maximum functionality of the attic. Plus such a roof is a reduced load on rafters due to two (or more) rods, which timely exempt the coating from precipitation.

The broken roof from the standard is distinguished by an angle of inclination. The upper part is relatively common, all subsequent - cool. Technically broken format echoes a semicircular roof, but it is much easier to be built and requires less effort.

When developing a project, it is important to take into account the material of the frontoths. For example, elements of brick or stone, which are assembled along the ends of the construction, increase the load on the design. The frontal frame of this load reduces, it can be insulated from the inside of the attic, but the stone is only outside.

The technical feature of this option lies in a small height of the walls, since each of them is at the same time towards elevation. Accordingly, the volume of the functional space is narrowed. However, the four-piece roof is practical in operation: the precipitates are instantly falling, not settled on the roof.

It is possible to expand the monsard space when installing a four-tie roof, which represents a type of broken roof (for the width of the buildings within 6 m). In this case, the design for each side of the house is equipped with rectangular skates consisting of two planes. Attic is spacious, but construction costs are reduced.

The classic version of the roof consists of four slopes that are connected at the top point - on the skate. At the same time, two of them are distinguished by a triangular form and are placed on the ends of the construction, the other two are made in the form of a trapezium.

The construction of such a roof requires professional project development, since the gaps in the calculations can turn into breakdowns or destruction. The hip blood type allows you to make a two-story house from a single-storey house, since the area of \u200b\u200bthe attic is spacious.

The design feature is to height the ceiling, which reaches the peak at the central point, so indoors can be divided into rooms (depends on the area of \u200b\u200bthe house). Due to the absence of frontones in the design, the hip roof is experiencing a smaller burden of snow.

Using the facilities of a hollow type, beautiful roofs of houses with an attic and a balcony. Additionally equip elements with erkers or skes. However, it is important to take into account the climate of the region. For example, windows are mounted on the roof only in southern latitudes with a small amount of precipitation. Otherwise, cracks and leaks may form on them.

Differs on the shortened size of the rods along the end of the construction and the presence of frontones. The height of the ceilings with such a design is not underestimated, allowing you to get the most convenient room for life. It is erected more difficult than the usual hip roof. The rafters system is complicated (they can be both changeable and hanging).

Private houses with a semi-haul roof are often equipped with balconies in combination with loggia (thus emphasizes the individual appearance of the construction). Frontones make the room warmer and at the same time serve as a "foundation" for mounting the windows or the door, which leads to the balcony.

The technology of the semi-haul roof implies a large number of consumables, so the financial exemption costs increase. Labor-intensive installation will require not only special knowledge, but also practical skills. The development of the project in this case is better to trust professional builders.

The optimal option for cottages, the perimeter of which is distinguished equal to the size of the parties. The roof design is equipped with four or more slopes of the same value. The design task is desirable to entrust the pros, which will make an accurate calculation for the load and resistance to the wind.

The design make a conical, dome-shaped or pyramidal form. The complexity of the installation directly depends on the number of skates (under each of them it is necessary to build rafters). Such roofs can often be seen on the extension to the house, where the closed veranda is located and the porch. At the same time, the format of the roof of the main building is found in various variations - double, holm.

The main plus design of the tent type is the ability to excellently withstand strong winds due to triangular skates. It is through them that the air from the street passes down, not falling into the attic space. An attic room quickly warms and keeps warm well. At the same time, the absence of frontones in the design reduces construction costs.

Key demand for attic - tightness. Careful laying of roofing "pie" will prevent possible problems in the future operation of the room, eliminating the possibility of penetrating cold air from the street and seasonal "thaw" roof (no insulation, hydro and thermal insulation provokes condensate formation from the inside of the roof).

To make an attic attitude, comfortable for living or work, it is important to consider the following items:

• select only high-quality consumables. Subsequently, it will save from additional costs for repairs or alteration;
• special attention to the installation of windows located in the roof. Here it is necessary to take care of the maximum protection against snow and rain, since the openings act as a vulnerable link in the design;
• wooden frames are processed by antiseptic to extend the effective service life of the material.

The type of roof for the attic roof is chosen at the design stage, since the total load on the foundation, rafters and bearing walls depends on the weight of this material. The correct and competent calculation for the construction of the attic, where the features of a particular design will be taken into account, will be the key to the successful completion of the construction.

Attic as a universal view of the residential premises opens an extensive field to embody any designer idea. Even the limited space of the attic can be converted to a comfortable office, a home library or a cozy room. The style of the future interior is important to think over in advance, based on the geometry of the construction. In some cases, the layout of the room depends on this.

The European design of the attic depends on the size of the windows: they are small, but at a competent location excellently skip the daylight, making the room light. Look at the photo on the arrangement of the attic rooms on profile sites, where you can learn many non-trivial ideas, and with their help it is nice to place the room.

For internal sheat, it is worth a preference to natural materials (for example, lining, plasterboard or fiberboard). Beautiful appearance walls are attached and polymer panels that perfectly imitate wood. This finish is cheaper and retains the attractiveness of the interior.

The material of the trim must have such characteristics:

• low weight and high refractory;
• good thermal insulation properties;
• protection against moisture.

The last item is especially relevant for situations where the roof is erected without compliance with technology, which results in condensate as a result. Drops of water flow onto the ceiling coating, seep up to the trim and provoke deformation (wood can be tested, drywall - partially destroy).

Keep in mind that surplus moisture will pursue an attic roof both in the winter season and in the offseason: a small temperature difference is guaranteed to "thaw". To avoid similar troubles, make a project to build together with a professional builder.

The most important thing is to follow the details of the technology when the roof is erected. In this case, the attic will become a truly useful room in which it is pleasant to spend time and not to be distracted by the next consequences of flaws.

Houses of houses with a balcony

The balcony is a special element of the house, attractive to him and convenience. But it happens that at first glance a simple architectural part hides in itself the serious costs, problems in construction, but also will not add comfort. In order for the project of the house with the balcony to be successful, it is important to provide all the details.

Projects of country houses with a balcony: Why do you need this space?

Thinking about the construction of a house, decorated with a balcony, it is worth thinking of its purpose. If you are planning to use a balcony as:

• Personal platform for recreation, it is worth paying attention to the plan at home with a balcony, providing for access to it from a bedroom or a cabinet. At the same time, the most intended wall adjacent to the balcony oriented towards a quiet garden, not a noisy street. On such a balcony, it is perfectly engaged in charging, yoga, indulge in reflections for a cup of tea or a cigarette, and even sunbathing. From how you plan to use a balcony, and its dimensions depend. So on the minimum area of \u200b\u200b2.5 m2, you can comfortably place a couple of wicker chairs, a small table or a chaise longue.
• Spaces for universal sites, then projects of houses with large balconies will come up as if it is impossible. In the best way to organize output to such a balcony can be from a hall or living room. If the lower terrace is already busy, it is possible to organize a place for gatherings with friends, you can safely on such a balcony. For this design area should be sufficient (from 4.5 m2) for convenient placement of a small campaign. Emboding a comfortable furniture on the balcony, you can get a cozy corner for communication.

Projects of cottages with balconies: if you want to change something

If you have chosen the project of the house you liked, but does not suit the compact balcony or its location in a specific part of the building, then we can make the appropriate changes in the project. It is worth noting that not all wishes can be embodied.

In technical terms, the cantilever balconies of various width are not always possible. Its width is determined by calculation and takes into account the peculiarities of each house separately, namely the materials of the manufacturer of the balcony slab, as well as the designs of inter overlap. In some situations, the balcony is the first floor walls or the columns provided by specifically.

Apply unrelated harm to the appearance of the house can excessive balcony, change its position, the need for a column device. Therefore, we do not advise you to independently make any without the involvement of the architect. If it is so it turns out that the changes you need contradict the considerations of architectural harmony and security, it is worth finding another project or embody the conceived with the help.

Z500 projects are designed for insulation of the balcony plate from all sides, which eliminates the formation of cold bridges and the subsequent freezing of the wall of the building.

Modern projects of cottages with a balcony are a wonderful opportunity to enjoy the surrounding landscape and stay outdoors without leaving home. This architectural element allows you to diversify stylistic techniques and complete the exterior of the structure.

How to use a balcony?

The popularity of projects of houses and cottages with a balcony is due to the fact that additional space can be used to arrange various zones. Small balconies (2.5 m2) are used to create a recreation area: accommodation 1-2 wicker chairs, a small table or a lounger.

Large balconies (4.5 m2i more) are often used to arrange a separate room (for example, a cozy corner to communicate with friends). Here you can do yoga, read your favorite books and nice to spend time after a cup of tea.

Order Cottage construction

Construction of houses with a balcony in Moscow and the Moscow Region proposes a country season. Our catalog contains more than 500 projects of cottages equipped with balconies of various areas and type.

Note! There are difficulties with the choice? You can always use the help of our consultants by contacting them by phone or by filling out an online form on our website.

If necessary, changes are made to the ready-made project of the house with the balcony. The construction of a cottage is carried out in the shortest possible time without prejudice to the quality, reliability and durability. We offer fixed rates, so you can be sure - the cost of work will not change after from completion.