Fencing for beds with their own hands. Cheap ways to manufacture tribes for beds. The better to protect the bed

Recently, high-popularity among gardeners and gardens acquire high beds - the original technology that came to us from Canada. Although, for justice, it should be noted that such structures used to meet everywhere. They were called dung beds and cucumbers were grown there.

High beds: what it is and for what they need

High, or elevated, the garden is a box-made design with a height of 0.15-0.2 m to 0.5-0.6 m and a width of 0.5-1.2 m. The length is limited only by the dimensions of the site. But these sizes may vary in an arbitrary side depending on the desire and needs of the owner. Inside the box is laid by a nutritious substrate and plant plants.

Hand-made high beds can become a highlight of garden design

It is best to cook a bed in advance in the fall so that the soil can settle and compact. In addition, it is not necessary to spend in the spring for this precious time, and with the arrival of heat soil warms very quickly and sowing it is possible for 2-3 weeks earlier.

Video: Why do not need high beds

How to make a high bed

The board holding the land is made from a variety of materials and remedies:

wood;
metal;
plastic;
slate;
brick or stone;
concrete;
plastic bottles, etc.

Photo Gallery: What you can make a raised bed

Circling and horizontal logs to make a very quick bed of vertical logs will require the application of large forces from wood. You can make such beds. High beds most often do from the boards, it looks very unusually in gravel in the mesh frame. Often, high beds are made of slag blocks. Even mesh plastic containers can be made by decorative material. Grokery can be made of flat slate (OSB).

In some cases, high ridges may not have lateral fence and be simply earthen hills.

High beds are without fence

Video: What are the high beds do

From wood

For the manufacture of frame structures from wood, support bars and wallboards will be needed.

Bone of wood for high beds can be toned in any color and paint

Works are carried out like this:

Video: Make a garden garden

From stone

Stone structures are built on the century, it looks monumentally, but to transfer them to another place is extremely difficult.

High bed of stone or brick successfully fit into classic design

The technology of work consists of the following steps:

In the perimeter of the selected location, the trench is a depth of 0.3-0.4 m under the foundation.
On the bottom of the trench, lay a layer of waterproofing (rubberoid, polyethylene, etc.).
Pull the sand pillow on a third of the depth.
Top layer layer stones.
Poured with concrete solution.
After a few days, lay a stone masonry.

Complex masonry work is better to entrust professionals

Brick beds are built by analogy with stone.

Video: Making a brick bed

From slate sheets, metal or plastic panels

For the construction of a frame structure will go any pieces of an old slate or metal, removed from the roof.

Groin, walls that are made of sheet metal can have a different form

The sequence of action is:

Plates are cut into the desired size.
Slate sheets cut into the desired size
Drop narrow trench around the perimeter of the future bed.
First dig a trench
The sheets of material are installed in the dug ditch.
In the corners, the plates are connected using metal corners.
Slate sheets connect with conventional wire
The trench falls asleep and thoroughly tamper the soil.

To give rise to greater rigid, stakes in the corners, to which a wooden frame from bars fastened.

One of my good acquaintance makes the side of a bed of plastic bottles of 1.5 liters. She sticks them along the perimeter with the necks down, trying to press each other to the cooler. Designed for different crops frames paint paint in various colors. It turns out very lively and unusual.

High beds can be built of empty plastic bottles

Video: Make a bed of sheet material

From the branches

The wind construction is constructed as follows:

Inside the wicker box can accommodate plastic containers

You can simply shout into the ground of the branches with several rows and fix them with wire.

Branches in the wall of the bed can be positioned vertically

Video: Make a bed of rods

High beds: how to fill it

After installing the skeleton, the Grokeka needs to fill correctly:

The bottom is lined with a finely metal mesh (from rodents).
Cardboard will not exist to weed
Drainage is poured (especially if the plot is wet) from stones, brick battle, shards, rubble, etc. In the hot southern regions, large woodwood, bruises, waste sawn timber, which, on the contrary, will hold moisture.
Then stacked thick bumps, chocks, branches, etc.
Then stacked smaller plant residues:
The latter with the addition of humidiation and complex mineral fertilizers is stacked by the last top layer.
Video: Fill a bed

Fencing for raised beds can be found on sale. They are prefabricated modular structures made most often of plastic. But to build such a box is easy and with your own hands.

Borders for the beds are practical and necessary fence around them. The main purpose of the artificial walls around the bed is an increase in the height of the fertile layer, which can be easily created by frequent mulching of the compost ground after watering. Over time, the fence for the growing zone of vegetables has become an element of landscape design. In a decorative garden, borders play the role of separators and framed of the territories on which cultural plants grow.

The practical benefit of the fence for the bed will demonstrate in the first season.

From aesthetic point of view, seed landing sites and seedlings of vegetable crops will look more well-groomed, noticeable, expressive. They do not need to be performed periodically in order, fight water leaks during watering, maintain a horizontal plane on the slopes.

From a practical point of view, there is also a lot of benefits:

on fenced areas for vegetables, there will be significantly fewer weeds than on the untreated area;
it will take less physical efforts to manual weeding, perplex, mulching, feeding and other works;
such structures are more convenient to close the film; At high fences it is easier to fasten arcs for the greenhouse to plant vegetables and flowers seedlings;
it is easier to make a natural heating, by creating a layer-by-layer bed with biofuels, for growing cucumbers, peppers and other vegetable plants that loving heat.

On fenced areas for vegetables, there will be significantly fewer weeds than on the untreated territory

How to make a fence for beds with your own hands

Certain requirements are presented to the walls:

they should be low (height 10-30 cm) so as not to shade vegetable plants at the beginning of growth;
neat - emphasizing straightness or incorrect, but attractive form of beds;
dense - not allowing to be filled with a fertile layer on a path or spread water beyond the boundaries of the area for cultivation of plants during watering;
beautiful to fit into the overall structure of the landscaping of the country area.

Fences of vegetables growing places are capable of making a garden not only cozy, comfortable, well-groomed, but also original, maybe even unique.

Boxes of them with a thick fertile layer do not need to pull, so the care of the soil in them is the easiest - loosening of the hoe before planting seeds or seedlings.

On flower beds and flower beds, curls of alive plants of one species (rosemary, calendula, Samsit, Issuop and other low-length perennial flowers placed tightly in 2-3 rows) are stylishly. Fences for the territories with vegetables are also constructed from artificial and improvised materials - bricks, boards, or wooden bars, stones, sheet metal, plastic, sawn severity and other construction waste. They can always be gaining in the right amount on nearby inglorious territories or cheap to buy in stores. Many dackets are on the question than to protect the beds in the country inexpensively, unambiguously respond - material from construction waste, cobblestones, a low stakenik and other objects that can be found on construction landfills, on the shallows of rivers and other places.

Borders for beds from wood - it's simple, usual, naturally. Simply - because any wood products for giving are a good design option. They are easily sealed with nails, self-drawing, glue. The woods are not difficult and also easily disassembled to transfer a new place.

It is familiar - because there are many buildings from wood around us.

Borders for beds from wood - it's simple, usual, naturally.

Naturally - because the trees grow everywhere.

It is originally a fence for beds from hemp, the same thickness of low chumbachki or low paste. Most often, wooden curb material for beds is a edged and unedged board, forming a roomy box without the bottom, where all the necessary raw materials fall asleep.

You can make a box from individual shields that are knocked out from the porridge, the stake, the old sex rack, lining and other types of sawn timber.

Shields stick to each other and fix the stakes clogged outside. This design is easily disassembled and collected in a new place.
Wooden items can be treated with protective impregnations from rotting and insects, which will increase its service life at times.

Until recently, it was believed that the wood was short-lived, and therefore impractical. But now wooden items can be treated with protective impregnation from rotting and insects, which will increase its service life at times.

A good option is the metal walls for boxes from the worn sieves of the solid mill of grain harvesters. Lightweight, durable, durable with many small ventilation holes, they easily cut with metal scissors for the desired size. The craftsmen who have a welding machine can be easily welded from a metal scrap metal frame for the growing zone of plants from pieces of iron sheets of the desired thickness.

Now in construction stores sell a special multi-layered steel galvanized professional sheet, with a polymer coating. Its height equals17 centimeters, and the length is different. It is convenient to do spacious boxes from it. Although his price is not cheaper, but taking into account durability, it is profitable to buy it. From it, the walls for territories with vegetables will last long.

Metal fences are easy to install.

Metal fences are easy to install. Places of landing seeds and seedlings of vegetable plants, framed by them, look neatly, beautiful (you can choose a professional owl of different colors), practical. But iron has a serious drawback - it is a good thermal conductivity. The soil near iron sides may heat up to a critical temperature that will coal cultivated and dry the soil. With this disadvantage it is easy to fight with the help of any girlfriend having a low thermal conductivity. You can from the inside metal fences to cover with cardboard, slicer pieces, stones.

Plastic fence for seed landing and seedlings of vegetable crops is distinguished by a number of advantages. It will be lightweight, durable, frost-resistant, not fearful sunlight, shock loads. You can buy a border ribbon in the store, which has an optimal balance of rigidity, flexibility, high plasticity due to which it can be bent at any angle. It is simply installed with her own hands, well supports the geometry of the beds, flower, and lawns. For stability is fixed by pegs, driven on both sides.

Plastic fence for seed landing and seedlings of vegetable crops is distinguished by a number of advantages.

Beds from plastic bottles do it yourself

Plastic bottles widespread sweater material. If you wish, they can be easily scored in sufficient quantities. Bottles are filled with any bulk material: ground, sand, small rubble, and then they simply make up close to one or more rows, into a groochka digging around the perimeter, the neck down. From plastic bottles, you can make a capital fence for space with cultural plants, if they are placed horizontally on cement mortar. If there are plastic bottles on the beds to lay outwards, the curb will have an original multi-colored look. With the help of a rich imagination, you can realize the better ideas of crafts from plastic bottles for giving with your own hands.

The owners who have just finished the construction of a brick house will be able to make stationary fence for places to landing vegetables with their own hands from brick residues. Framed by this building material beds and flower beds will look at a single ensemble with a residential building. Brick can be boiled in different ways: on the edge at an angle; on the edge in a row; The first row is plafhone, and on top of a solution of a row on the edge. A decorative border of bricks largely depends on the fantasy of the owners of the country area.

A decorative border of bricks largely depends on the fantasy of the owners of the country area.

Stones in sufficiency can be gained in any place: on the river, on the slopes of the hills, in gravel careers. There are many options for the manufacture of permanent stone borders from stone. The easiest and most affordable way is to fall asleep space between the two mesh metal grids covered around the perimeter of the box. Such a fence is called Pergon. In such a stone "bag", the zucchini and tomatoes, cucumbers and swallows will be comfortable. Yes, and other vegetable crops that are grown in beds, it will be comfortable inside the natural, environmentally friendly, fence.

There are many options for the manufacture of permanent stone borders from stone.

Fencing beds from wave slate

Wave slate, like roofing for roofs, has already come out of fashion. It is universally replaced by a straightened, different types of tiles, soft roofs. But the wave slate sheets have become very popular with summer houses, which build up slices for durable, comfortable, almost darma fences and fences for growing vegetable plants. And if you decide: what to upset the beds in the country is cheap, then, perhaps, the cheaper of the old wave slate material is not found. But first slate must be prepared for installation as a fence. Each sheet is placed on pieces of the desired size and cut by a grinder. This work will not take much time. The process of cutting the beds consists of the following actions:

Marking of the boundaries of future beds with a strong twine and stakes that are driven by corners. On the stretched cord, there is a trench of a depth of 20-25 cm (on the bayonet shovel).
The trench establishes the same width of the slices of the sawn slate, align and slightly plunged into the bottom of the trench with a light tapping of the hammer.
For the stability of a slate harness from the outer side, sections with a length of 0.5 m are driven, with a depth of 30 cm. It turns out a roomy box.
For disinfection, the inner side of the box is treated with hawed lime.
The bottom of the box is lined with sawdust, dry grass and leaves. Then it is abundantly watering with water and the fertile soil is poured on top.
Next, you need to think about the protection of slate from direct sunlight, as it is strongly heated in the sun and contributes to the accelerated evaporation of moisture. If there is an opportunity, the walls of the slate need to water more often. The slate part of the slate will become an insurmountable obstacle from the navel of the bear.

From the wave slate it is not difficult to build multi-tiered flower beds and a bed, on the tiers of which you can grow flowers, strawberries and other plants. And you can burn a small section of the garden, where to prepare a compost from weaving plants and tops from vegetable crops.

General procedure for the construction of a border for beds from any material

The height of the fence depends on the purpose of the purpose of the garden, as well as from the convenience of causing plants:

for fertile garden land - 15 cm;
for non-fermentation soil - up to 30 cm;
for potatoes and other pasacles - up to 40 cm;
for compost with biophews - up to 50 cm.

A sequence of actions in the manufacture of a border from the primary means;

We calculate the place for the cultivation zone of vegetables. We place with the help of a cord and pegs of its border, making focus on smooth sides and straight corners.
From the board or other material, we build a durable, hard box. To mount them between themselves, use self-tapping screws and a screwdriver, welding or trowel.
The bottom of the fenced plot with a rubble, gravel, slices of dishes, stones, bricks for drainage. Then we lay out the uniform layer of the leaves, hay, fresh grass.
We fall asleep into the box prepared fertile soil, spread. It should not be weeds. From the top edge of the border to the aligned layer of the Earth should be 3-5 cm.
Looking out seeds or seedlings of vegetable plants. Mulch the crushed crust of deciduous trees. The goal is to create an optimal microclimate and moisture preservation.
If the box surrounds the lawn, then it is advisable to strengthen its reinforcement of water, cement and sand. The layer is small - up to 3 cm. For strength and beauty on the solidary deficiency, you can be laid with a gap of 1-2 cm bricks. In the gaps of bricks, fall asleep dry sandy cement mixture.

Many dackets are categorically opposed to the use of those materials for the chicketer, which are many in cities and settlements: metal, concrete, bricks. We must make borders from natural colors, herbs, stones and wood. It is difficult to disagree with this, but it is also no need to forget about practicality. The main thing is that it is useful, not harmful, contributed to getting high yields and pleased the eye! We will not also forget about the durability of borders and the ability to care for plants.

The organization of the garden space can be different, but fences for the beds, bushes or beds will easily fit into the landscape design. Designs are practical, they can be created with their own hands using suitable technology and selecting materials.

Species and features of fences

The fences used in the garden plot are diverse and differ in appearance, design, materials. The main goal of any option is to ensure the protection of plants from weeds or flooding, the separation of cultures. From aesthetic point of view, the fences are also important, because they allow you to properly organize garden space, decorate the site.

Fences help maintain order in the country

For beds

Groans are present on many garden sites. For the separation of garden crops, the order in the country needs flights for the beds. They can be made of various materials, but all designs are easy to make with their own hands. It is important to use high-quality and eco-friendly materials. Otherwise, the plant will not develop as efficiently as possible, because many artificial materials are unsafe for them.

Forers from wood

Fencing for beds with plants often constitute wooden sides. This option is practical, easy to create and allows you to carefully divide the beds. Designs must have parameters equal to the Groke parameters. Wooden products in the form of a box are made from 2 cm thick boards. Elements are fastened with self-drawers, treated with antiseptic for wood or painted. When choosing a material, it is best to give preference to larch, as it is more durable. Pine or other elements are suitable, but processing is always necessary.

Wooden fences are practical, environmentally friendly and simple, but possess such a disadvantage as a short time. Under the influence of moisture, ultraviolet, wood temperature drops are covered with cracks, deformed or rotates. Therefore, the boards need to be treated with antiseptics or staining.

Slate

Simple products from slate are easy to make it yourself, if there is already a material. To create sideboards, the old slate is used, removed from the roof when replacing the roof. The canvas are cut into long elements, the height of which corresponds to the thickness of the bed of the garden of the garden. The main advantage of this option is the availability of material. The disadvantages are expressed in the fact that the old slate is very fragile and highlights the harmful components into the soil.

When creating ports, you need to additionally strengthen the slate elements by reinforcement corners or twigs. They are installed along the length of the bed through each meter, the rods like supporting slate details. The appearance of such fences is rather laconic, designs can be painted with compositions designed for external work.

Metal fences

Reliable fences for the beds can be made from a profile or sheet metal with galvanized or polymer coating. The cost of such structures is high, but if there is such a material, it is important to know its features. Bursts are metal stripes that are fastened with special corners. At the top edge, a protective corner is also fixed, which makes the construction of a comfortable design, because the edges of the sheets are sharp.

Metal structures are quickly heated in the sun and contribute to the heating of the soil. It should be considered when using a metal for separating the beds.

Video: Beautiful fences for beds, a selection of ideas

For bushes

The raspberry bushes, currant or other cultures need additional support, as the branches are strongly spread and lose the form. For this purpose, fencing from wooden bars, PVC water pipes, metal and metal-plastic pipes are used. In any case, the design consists of a support that deepen into the ground and ensure the stability of the fence. Support for branches of shrubs is carried out using the top in the form of a hoop. This option is universal, in demand and convenient to operate.

Peers and durable rop often use as a slight option. In the circumference, the bush is installed in the ground support, and then stretch the rope. The height of such a design should be a little less than half of the bush. The construction allows you to raise the lower branches and make the plant care simple and easy.

The advantages of streams for bushes are as follows:

preventing harvesting, as the lower branches of the bushes do not concern the soil;
convenience of watering and leaving plants;
more convenient harvest;
simplicity of designs from various materials;
preventing the growth of shrubs;
the possibility of forming the necessary shape of the bush.

The disadvantage of this design is that it cannot be used for very voluminous bushes with heavy branches. In this case, more reliable variants having enhanced supports and square shape are preferred. Such products can be made of metal or wood, metal-plastic pipes.

Fencing of the parisades and flower

A carcain or flower garden can be open or closed. In the first case, the fences do not use, and in the second - the elevation is necessary. At the same time, the design separates decorative plants from the rest of the plot and complements the landscape design of the territory.

It is possible to separate the decorative plants using a variety of wooden structures. The classic low fence from the stakenik is a universal option for any site. And the metallic fences are effective, which are made of metal strips with a polymer colored coating. Forged fences for the parisader look beautiful, but differ in high cost.

Any variant of the flower bed fencing or the palication must be beautifully decorated, because the decorative function is important when using such structures. The height is calculated depending on the magnitude of the plants that must be separated from the main area.

Supports for grapes

Grapes are often grown with a decorative goal. For this you need pergolas or horizontal trellis. Such structures can be in the form of a gazebo, a cup-shaped or arched. Material for manufacture often serves wood, as it is an eco-friendly and convenient in operation.

It is simply with your own trellis from wood, but when using metal elements, you need a welding machine, attachments with an anti-corrosion coating and other details. Wooden elements treated with mourn and varnish are sealed with nails or self-tapping screws, creating the design of the necessary form. In any case, the dimensions of the choler are selected depending on the location of their location. It is possible that the finished gazebo on the plot will serve as a support for grapes.

Videos: Making a choler with your own hands

Preparation for mounting

To create any fence or a small fence, it is important to calculate its parameters. Dimensions depend on the type and purpose of the design. For example, flower beds often do not exceed 50 cm height, and higher structures are needed for decorative shrubs. The length of the fence depends on the perimeter or circumference of the flower beds, but do not have the design close to the extreme on the flower bed. They need to retreat about 30 cm, which will ensure comfortable care and the correct development of greenery.

Before building the fence, you can draw a diagram on which the form, design parameters are reflected. And also in the diagram indicate the location of the main supports in the form of columns, the distance between them. This will allow you to calculate the desired amount of material and determine the features of the installation.

How to choose Material

Safety or small fence can be made from a wide variety of materials. When choosing, it is necessary to be guided by the appointment of the fence. For example, a laconic, comfortable in operation and eco-friendly sides of the tree are best suitable for furnaceing beds. Separate shrubs or flower bed can be brighter and original options. Print elements are suitable for this purpose. In any case, the quality of the material should be high, and it is also worth considering the installation technology.

The base for the fence can be made of the following materials:

Plastic bottles. It will take a large number of details that depends on the length of the fence. Bottles must have about the same size of the bottom, and for mounting they need to be easily deepened into the ground around the perimeter of flower beds. Capacity should fill with sand for greater strength. Pre-staining in bright colors will make such a fence unusual and beautiful.
Polycarbonate. From segments of cellular polycarbonate, color or transparent, easy to make a fence for flowerbeds. The ends of the elements must be pre-deceived by transparent sealant or silicone, and after drying, deepen the parts into the ground around the flower bed. Segments glue with a transparent glue for external work.
Wooden boards, stakenik. There are many options for fences from wooden elements. The designs of any form are easy to make bright and original or create practical flights for the bed.
Concrete slabs are convenient for durable fences. Elements of the same size deepen into the soil around the flower bed perimeter. The ground around the fence should be good to ravibly.

Before choosing any material, it is important to pay attention to its quality. Polycarbonate, concrete products are distinguished by high cost, but reliable and durable. Boards and metal profile require anti-corrosion processing, which will make them more practical. Therefore, it is worth familiar with the peculiarities of the material, its advantages and disadvantages.

Table: pluses and cons of materials

Material	pros	Minuses
Plastic bottles	Availability, easy installation and operation, the possibility Creating any color design.	Low strength, you need a large number Elements, it is necessary to strengthen the bottles.
Polycarbonate	Practicality and accessibility, simple fastening, variety Coloring, durability and convenience.	It is important to handle cellular polycarbonate ends, high price.
Wood	The ability to create any embodiment, availability, Ease of installation and operation, versatility for any climatic conditions.	Need antiseptic or painting treatment, DISTRIBUTY in the absence of processing.
Concrete or Stone Plates	Reliability and durability, easy installation, practicality and convenience In operation.	High cost, you need a large number of items.

Calculation of the number of materials and tools

When building a fence from a flower bed boards, it is necessary to determine the height of the structure, which depends on the magnitude of the plants. The fence with a height of about 40 cm is suitable for most colors. After that, from extreme plants, it is necessary to retreat 30 cm and measure the perimeter of flower beds. The resulting indicator is a fence length. For the fence from the stake, the support columns, transverse rails and planks are needed. The distance between the columns is 1 m, and there are about 5 cm between the planks. At the same time, the plank width should be about 10 cm. For the construction of 50 cm height, two transverse lags are needed. Thus, for every 100 cm of the fence, approximately 7 slats.

The flower garden fence can be made from the finished sections of the stakenice, which can be wooden, plastic or metal. To do this, it is necessary to determine the length of the fence and, depending on this, choose the number of finished sections.

For self-installation of wooden fence, the following tools will be needed:

roulette and construction level;
shovel and crushed stone;
nails or self-tapping screws;
hammer or screwdriver;
brush, antiseptic for wood, paint.

Before work, you need to prepare a stakenik, setting the planks on the items of the required length. Transverse lags must have a length of slightly more than 1 meter, since the distance between the support columns is 100 cm, but the bars must be attached to the supports.

Installation of flower bed fencing

Before work, you should apply for all the wooden elements of an antiseptic designed for wood. This will save the quality of the material and facilitate work. For this purpose, you can use a veil, which can be different shades of natural wood. If the boards are very rough, then before processing, they need to be eaten by sandpaper with medium-sized coating. After that, you need to remove dust and apply a protective agent.

Drying the means lasts several hours, and the exact time is indicated in the instructions. After this period, you can begin to install, which includes the following actions:

By spicks and ropes, we note the line of the future fence and space for the support pillars. The shovel make the depressions of 40 cm for the supports, the height of which should be about 1 m. On the bottom of the scene of the sand with a layer of 5 cm, set the poles, fall asleep with rubble, and on top we will be tamed soil.
On transverse lags, you need to attach the planks of the fear, observing the distance between them. For fixing, nails or self-tapping screws are used, and evenness is checked by the construction level. It should be noted that the fence is collected sectionally, alternately by mounting each section. Rock strips on lags are needed with an indent from the edge of approximately 5 cm.
Prepared sections are fixed to the installed columns using self-tapping screws. Equality is verified by the construction level. At the same time, the lower edges of the planks should not be close to the soil. The distance between the soil and sections should be about 3-5 cm.

Fencing for bushes

The raspberry bushes, currant and other garden crops need a fence or comfortable support that allows plants to develop comfortably. One of the easiest options is the design of PVC pipes, which has a rectangular shape. For work, pipes with a diameter of about 20 mm are needed, as well as angular fittings that allow you to connect all the elements.

You can make your own hands the fencing for bushes with a welding machine for PVC pipes. And also requires segments of products. Their length corresponds to the height of the design (depending on the parameters of the bush). The feeding diameter is selected depending on the parameters of the pipes. After cutting items, it is necessary to make the holes near the bush, in the corners, depth to 30 cm. The frame of the future fence is welded with the help of the device, connecting the fittings long segments. The design is installed in the pits, the tampering ground.

Support for grapes

Vintage decorative or actively fruiting type requires the creation of a support or a steller. In the first case, any designs that allow vines easy to grow are appropriate. For example, a small gazebo with lattice walls will provide beautiful weaving stalks.

Installation of a simple version of the choler suggests the installation of two supports from 50x50 mm bars, the distance between which is determined depending on the desired design width. A locking bar is fastened to the top ends, and then mounted thin rails in the form of a lattice. All items are pre-treated with a veneer or other antiseptic. The finished design can be covered with lacquer for external work.

Video: How to make a simple fence for beds or flower beds

Fencing or fences will provide any kind of gardening order and aesthetics. Simple designs are easy to make with their own hands, pick up the quality materials.

And you know what an innovation is like high beds came to our country from Canada. There, the Earth is treated in this way for many years. Such landing options can be used not only for growing vegetable crops, but also to create original. Let's find out how to make beautiful and practical high beds at your own hands. Photo, description of technological processes and schemes will help you with this.

High beds in the country with their own hands: photo of structures and main characteristics

The dimensions of gas exchange, moisturity of the soil and the presence of useful microorganisms depends on the dimensions of the groin. All these parameters affect the quality of the soil.

With the help of raised beds, you can grow a large harvest of berries, vegetables and fruits. At the same time, it is possible to get good indicators even from a plot of land that does not differ fertility. A feature of high beds is that they warm up faster than low designs.

There are several varieties of vertical beds. They differ not only by material, but also functionality. Some options are made from building materials, while others are simple.

Here are some types of beds exist:

trapezoidal structures;

multi-tiered beds;

constructions with a triangular cross section.

When creating isolated beds, you can take into account factors such as illumination, the composition of the soil, as well as its structure. At what height, such a garden will be placed, depends on the volume of the root system, the characteristics of the soil and its own preferences. The minimum height is 15 cm, but to produce better isolation, then you can raise them by 30-40 cm. Warm raised landings can be above 50 cm, since the layer is still stacked on the bottom. Narrow beds can have an altitude even half of your growth.

Length may be the most diverse. Most often it depends on the length of the garden. If the garden is too long, then it needs to additionally enhance the side. When arranging any beds, remember your own comfort and convenience. The best width when you can reach the middle of the design. The optimal value is 90-120 cm.

At high beds, you can grow different cultures. It is not recommended to use plants with high stems, since they will be inconvenient to collect fruits. On bulk structures often plant roots, strawberries, peppers, greens and cucumbers.

For your information! Special benefit is the filler for raised beds. It is made from organic components. In this case, the root system is located in a fertile layer, which contributes to the development and growth of plants.

Article on the topic:

Let's find out how to make the original beds and from which materials they can be built. Interesting ideas in our review will help you create a variety of designs.

Features of high beds: pros and cons

The main advantage of raised beds is that many vegetables and plants can be placed in a small area. High beds for strawberries, fragrant herbs and cucumbers are especially popular. Also in such structures there are other advantages:

funny beds can be filling in specially cooked ground. In this case, the quality of the soil on the site does not matter much;
it is possible to regulate the thickness of the soil layer for any plants;
raised vegetable gardens are easier and pouring;
raised beds can be broken in any place, even with a difficult terrain;
on high mound, the seedlings can be planted earlier, since the soil in them warms up faster;
on raised soil gardens more loose, which contributes to a better gas exchange;
can be used for that will be filled from the edge of the fences for high beds;
depending on the material, you can create not only practical, but also beautiful designs. Some options can become a designer masterpiece of your garden;
high beds with sideboards are practically not affected by weed attack, as well as well protected from mold and fungi;
installing the beds is not a complicated procedure, you can also easily dismantle. Location of landings can be easily changed;
inside such structures, you can create a convenient one;
the soil on raised beds is maximally protected from freezing. During early frosts, you can cover such a landing with polyethylene;
the construction of high landings is protected from erosion during rain.

There are also certain minuses in such designs, but they are not so much. First of all, it will be necessary and feeding with mineral fertilizers. It is important to follow and the invasion of the Medveda.

For your information! Before starting work, treat the parts of the tree by antiseptic and special impregnations. This will prevent the processes of rotting and protect from the destruction of materials.

Creating vertical beds with your own hands: photo options

You can also create warm high beds or vertical structures. They are popular because of the appearance and saving of useful area. In addition, this is an excellent solution for planting landings from different pests. Vertical structures are remarkably suitable for growing flowers, strawberries and spicy herbs. You can not only make such structures from girlish raw materials, but even purchase ready-made options. How to make warm designs you can see on video:

Why it is worth buying a vertical bedding for strawberries: prices

You can see different design options for vertical beds, but their most important advantage are miniature dimensions. Similar structures can be built from any materials, even from plastic bottles.

Vertical products do not require special care. They are at an optimal height, in order for them to handle them.

How to make an elevated strawberry design You can see on video: To increase the hardness of the pyramidal bed, you need to install an additional pillar as the reference element. At the same time, the boards are mounted on a horizontal surface and are attached to each other. A rake is installed in the base. The resulting side is fixed vertically, and then the second and third side is attached to it. After installing the frame system, the length of the rail is measured. They are located with an interval of 25-30 cm. In order for the regiment to be raised - its ends should be cut off at an angle of 30 degrees. After assembly, the design is filled with soil, which is tram.

Technology of arrangement of vertical beds for strawberries from plastic pipes

To grow strawberries, you can build a vertical bed of out. At the same time, it is necessary to prepare plastic pipes, steel cable and a special cutting knife. The volume cross section allows you to place inside the required amount of soil. Noise should be performed along the design. To fix the bed in a horizontal position, you need to do the hole in each of the half. Then through them stretching the line or cable. Then the details are placed one above the other. At the same time, it is possible to make different levels of beds from PVC pipes with their own hands.

For your information! If it is planned to place designs in a suspended state, then you need to take into account that they can swing. Therefore, they are better installed in places that are well protected from wind.

Erecting vertical beds with your own hands using a construction grid

Compact design can be built for crops such as strawberries, greens, flowers or potatoes. A good solution will be a vertical bed. To do this, you need to prepare a metal grid, a straw, special soil and the necessary tool for material processing.

To create a bed, you need to bend the grid in the form of a pipe. In this case, the cross section should be 0.9 meters. The edges are fastened with wire. Side sides are stamped, and the free space is filled.

To plant potatoes, such beds should be placed at a height of 50 cm on the surface level. Between the plants, the gaps of 10 cm are left. Then the first layer should be shed, then lay the soil and plant seedlings.

Features of the arrangement of the vertical bed for strawberries do it yourself: the use of pots

To grow strawberries, you can apply the usual. Similar structures make it possible to create an attractive exterior design. You can use both plastic and clay pots. Thus, you can create a multi-level composition.

Pots need to be selected so that their diameters to the top of the design become less. At the same time, the difference between pairs of pots should differ little.

The largest pot is installed in the selected place and the soil is filled. After that, the pot is smaller and so on. When the design is ready, plants are planted into the soil and water. Based on the construction of the construction, the largest pot is established. Inside the rod is laid in size than the diameter of the container. The pot is filled with soil, and the rest of the products alternately ride on the rods. After filling the soil, plants are planted. Pots are attached to a post or high stump.

Nuances of creating vertical beds for strawberries do it yourself made of tires: photos of products

There are different ways of growing cucumbers in the open soil. In this case, you can build vertical beds. Also this option is suitable for landing strawberries.

Tire construction is mounted on the same principle as potted facilities. For this, tires of different sections are suitable. But at the same time, consider that old products are not particularly eco-friendly material.

Before mounting the tires should be cleaned, dried, and when necessary to paint. The largest tire is put down down, and the side is cut down on the side. The hole is filled with soil and planted with plants. Thus, other elements are stacked. Tires can be beautifully decorated with patterns or even unusual cuts.

Article

Growing plants at the cottage - a difficult thing that requires knowledge and responsible approach. To improve the site and ensure favorable conditions for the development of vegetable and other crops, beds are used. Find out their types and features of the organization with their own hands.

If you plan to organize a bed in the country with your own hands, check out the features of the process. First spit into the concept: the garden is partially isolated small, in the appropriate conditions you can grow different cultures, providing the right individual care.

When organizing the beds, a few points are taken into account:

The location depends on the specific culture grown. Some plants require good lighting, others feel better in shading. When choosing location, you need to consider the relief of the site. If the place is located in the lowland, moisture will accumulate in it, which is unacceptable for some crops. When placed, ensure free access for convenient and unimpeded care. For this, do not place the beds away from the sources of water and do not arrange them in small distances from each other, otherwise walking between them will be problematic.
The form is determined by the preferences of the owner of the cottage. It can be standard rectangular or square, but it is possible to organize a bed with unusual outlines in the form of figures. The form is influenced by the territory, because the beds should organically fit into it.
What plants will be grown? They require individual care, taking into account the characteristics of a specific species, so the characteristics of the culture affect the choice of location in the country, the size of the beds. And some vegetables do not get along, so it is necessary to plant them separately at a considerable distance.
Skills. If you plan to organize a bed in a plot for the first time and do not have knowledge, choose unpretentious cultures and simple in the bed of bed. Deciding to create complex structures, you risk allowing mistakes and reduce or spoil the harvest.

There are several types of beds, and they should be considered in detail and separately.

Grocery-konta

Grocery-box is a convenient and popular method of arrangement of the garden, allowing you to create a separate isolated plot for a certain culture, attaching the territory of a neat, aesthetic and well-kept look.

You can make a bed-box through the preparation of the place and its fencing with shields. To designate boundaries and arrangement of the walls, polycarbonate or plastic sheets, boards, slate (wave, flat) are used. It is desirable to choose a practical and moisture-resistant material that can serve one season and keep strength.

The organization includes several stages:

Designation of borders. Follow them or lay out pegs, taking into account the shape and size of the bed.
Installing walls. They are placed in the ground, in which the furrows are pre-prepared. The soil must be tamped to ensure the stability and strength of the structure.
Fall asleep the earth and the organic, alternating layers.
Plant plant.

For your information! Preparation for winter beds-boxes implies their collection. In the spring, the construction is erected, produce loosening and planting the soil with a chosen culture.

Groans with drainage

Groans with drainage are relevant and necessary if the garden is located in the lowland, and clay or wetlands. The excess and stagnation of water are destructive and provoke the rotation of the root system, so you need to ensure timely constant removal and optimal gas exchange.

For the organization of drainage, do it yourself according to the instructions:

Recalmine the landing site.
Remove the soil layer with a thickness of 50 to 60 cm.
The sand formed on the bottom of the pit is laid down, the thickness of the layer of which will be at least 20-25 cm.
Place the sawdust, humid and layer of the soil on top of the sand, suitable for growing the selected plant.

High

High beds should be made on a lowered or very wetrated area: the soil will warn the moisture stagnation and ensure timely drainage. It will be suitable for bulk crops, potatoes, zucchini. Height can be from 30-35 cm to 70-80.

Step-by-step device of high beds in the garden:

Prepare a box. It is possible to build it from plastic, boards, bricks, metal.
At the bottom of the construction, a metal grid is installed, providing protection against rodents. On top of it stacked geotextiles, preventing germination of weeds.
Place the drainage, which includes clamzit, broken brick, pebbles. The layer thickness is at least ten centimeters.
Prepare the soil by reliming it and processing insect pests. Put the soil box by filling out a large part of it and leaving flights with a height of about 5 cm.

Good to know! High beds can be organized without boxes through bulk trapezium or ridges. A compost layer is stacked on the soil, providing soil raising. Next, the land is embanked, landing is carried out. But the beds will only serve one season, as for the winter they will be asked under the weight of snow and splamen at its melting. If insects are common in the region, the compost is better not to use: pests quickly populate and multiply, destroying the harvest. The lifting is ensured by embankment of soil.

Vertical

The vertical bed will save space in the garden and become an excellent solution if the site has a small area. But the option is suitable for crops with a not developed root system: strawberries, lettuce, cucumbers, greenery, tomatoes.

For an organization, it is allowed to use drawers, special racks or containers. You can arrange a vertical bed of the girlfriend, make it easier from plastic bottles and putting them on a homemade frame, assembled from a board or metal profile.

French

In 2018, beautiful and aesthetic french beds are relevant. Distinctive features are laconic geometric shapes, strict planted rows and paths between landings. Fences can be made of finishing materials (terraced board, paving slabs), bricks. It can be done by putting around the perimeter of a sheet of leaf salad, a low look of greenery. Lift the zones if the soil is swallowed, or the site is often amplified.

English

Lovers of original ideas will appreciate English beds that allow the confusion of cultures. , garden zone with trees and garden do not have strict borders and form a single landscape design. One site may include floral flower beds, fruit cultures, vegetable landing.

There are spaces for free movements and comfortable care between the beds. The territory should not look like launched and abandoned, so carefully take care of the garden, make, free the ground from weeding herbs and protect the beds around the perimeter, for example, stones or bricks (you can irregular forms).

Lazy

Lazy beds will fit novice or highly occupied summer houses, as they do not require a complex organization and labor-intensive training. No need to prepare deepening and pumping the ground to a greater depth. It is enough to rush the land, freeing from weeds, slightly disintegrate, then carry out disembarking. The spaces between the bushes are filled with mulch, ensuring the preservation of moisture and the prevention of its rapid evaporation, as well as protection against weed herbs. This simplifies care and helps to collect good yields.

Tip! Lazy beds are terrestrial and deprived of fences or raised and surrounded borders.

Smart

Smart beds are not only original and beautiful, but also practical and productive. This method of organization will create optimal conditions for cultivation and increase the volume of harvest.

Make smart beds on the plot is not easy, as it is necessary to lift them and fill out not ordinary earth, but specially suitable for concrete crops with mixtures consisting of compost, fertilizer, clean nutritional soil, organics. Disembarkation is protected by fortified highlights. The site itself is desirable to raise to protect water from stagnation and pest attacks.

Warm

Warm beds will allow early harvest and become a good alternative to greenhouses. The heat of the landing will provide an organic agent, in the process of decomposition of energy.

The arrangement is carried out at the end of autumn and includes several steps:

Remove the soil layer with a thickness of about 50 centimeters. You can also make a box and install it in the prepared recess. On the bottom of the pits or capacity to protect against mole, you can lay a metal grid.
Put on the bottom pre-collapsed and treated with a solution of mangarteal wood sawdust. This layer should have a thickness of at least 15-17 cm.
Lenten the organic, consisting of false foliage, jam, litter birds or manure. Failure this layer to thickness 15 centimeters.
Place the organodium subjected to rapid rotting, for example, prepared compost. This layer has a thickness of about 10 cm.
Place the nutrient mixture, which includes six parts of peat and part of sand and sawdust. Add here on a tablespoon of ash and superphosphate, on a teaspoon of potassium sulfate, urea, zinc sulfate. The fertile substrate has a thickness of 20 cm.

With the first rays of the spring sun, the organic machine will highlight heat, warming the soil to 40-45 degrees, which will allow planting cultures much earlier. So you can grow plants with a small root system: cucumbers, strawberries, greens, radishes.

Groke fences

Establish beautiful and neat beds and zoning the villagers will help the fences. Try to organically enter them into the landscape design and make it competent to protect the plants from negative impacts and create an aesthetic look of the garden.

Different materials are used for fences: polycarbonate, slate, metal, wood (boards or brica) stone, rods and pegs. Lovers of interesting ideas are allowed to progressive means: plastic and glass bottles, automotive tires, old hoses.

The following are the characteristics of the main types of materials used to organize fencing.

Metal

The metal fences are pretty durable, but may be subjected to long-term exposure to moisture and to be covered with rust, which will not only worsen the appearance of the side, but also will negatively affect the composition of the soil. Thin metal is subject to deformations after mechanical influences. Also, the metal heats up in the sun.

Galvanized

Galvanized fences have good characteristics: do not be corrosion, they serve for a long time, preserve properties, differ in high strength and resistance to the attacks of pests and fungi. The beds will be reliably protected from wind and other natural phenomena, pests. Finished fencing from galvanized steel is easy, easy to assemble, have different shades.

Big minus - high cost of structures. They also quickly warm and transmit heat into the surrounding soil, increasing the temperature of the soil and negatively affecting the root system.

Plastic

Plastic fences - a modern solution. They have a small weight, are not subjected to attacks of pests and exposure to high humidity, they serve quite a long time and have an affordable price. Light plastic will not be very hot in the sun. But fences are defeated by mechanical effects.

Applying to the organization of beds in the country, you will equip the garden, make the territory and get an excellent harvest. Good luck to all gardens!