- Excellent solution to the problem of recycling leaves, branches and other garbage of plant origin. If you spend a lot of time in your garden in the country or near the country house, then probably more than once came across it.
Naturally, choose a specific model - not a simple task. The market presents a huge number of various shredders, which are intended for different volumes, types and working conditions.
In the next section of this article, we will tell about all the important technical characteristics of garden shredders, and then imagine your attention a dozen interesting models that can be purchased from our catalog stores.
The main characteristics to pay attention to
Engine
Like many other types of garden tools, choppers are equipped with gasoline or electric type engines.
Electric shredders are easier and more compact. In addition, they require minimal maintenance. The only limitation is affection by the power grid and the need to use long power cables. Usually, electrical models are ideally suited for use in the country.
Gasoline choppers are rather designed for professionals in the field of service and environmental care. They are autonomous, but more cumbersome and require careful care.
Power
Power characterizes the performance of a specific model of the shredder and its overall efficiency in operation.
The more power, the better the shredder will cope with the larger garbage - not only with leaves and small branches, but also in small blesses and even boards.
For use in the country conditions or near the country house, it is enough to be the chopper with a power of 2 to 3 kW. If you are going to deal with a larger garbage than leaves, grass and branches, you can think about the acquisition of the model with a capacity of higher - up to 4 kW. Even more powerful shredders are designed for professionals.
Power Supply
Most of the usual electrical garden choppers are connected to a conventional single-phase electrical power network. Only powerful models intended for long-term work with large volumes of garbage use a three-phase high voltage network.
Maximum thickness of branches
One of the main parameters of any shredder. It indicates which branches can be erected without any problems without fear damage knives, milling or other parts of the car. If you buy a shredder for giving, this parameter must be approximately 35-40 mm.
It is worth noting that expensive powerful models that can also be recycled and the boards are usually reported on this separate line on the packaging and in a technical passport.
Tool cutting
Most of the models on sale are now used to grind the garbage knives located on a very fast rotating disk. They are great for small garbage like leaves, herbs and small branches.
Milling choppers are more powerful and more expensive - they are designed to work even with large branches. In this case, the fine and soft garbage in such grinders is not so high quality.
Speed
The higher the speed of rotation of the knives or the cutter cutter, the faster it will cope with its task. At the same time, it is necessary to take into account the fact that the knives rotate to orders faster - usually these are several thousand revolutions per minute.
Models with cutter work on low revs (up to 100 per minute), which allows them to carefully and effectively crush and recycle solid garbage.
Container
Most likely, you want to make the crushed garbage immediately fall into a container specially designated for it. Such a container can be purchased separately, but it will also be better to choose a model that comes with it complete.
Many daches today abandoned chemical fertilizers so that their own vegetables and fruits are most secure as possible. But what then feed the garden and the garden? Garbage from your own site! Of course, it is still necessary to recycle and lay in a compost bunch. But it will be the most environmental and high-quality fertilizer, and all waste you can find application. The branches, dried flowers, trimming vine grapes, fired apples ... All this is a wonderful raw material for the future humoring, and you need to grind it and folded into one place to overload. Special technique is even invented to help the summer house - shredders who facilitate the process of crushing branches. Consider how to choose a garden chopper for your own cottage.
This device is in principle so simple that it is surprising, why no one has outrered him for so long. With something, it looks like a meat grinder that grinds everything that it is put in it. True, instead of bones and meat, the crust, branches, bumps, rope of roots, etc., is falling into the chopper, and the frustrated material comes out. The level of crushing varies from small pieces to sawdust. Waste in the receiving funnel are grinding with powerful knives that start an electric or gasoline engine.
Varieties of a knife system
To make the right choice of garden chopper, you should familiarize yourself with the system of knives that will change the country waste. They are two types: disk and milling.
Disk system knife
This device is a disk with several steel knives. The rotation speed disk sets the shaft. How fast is the waste, it depends on their composition, but the disk system is best grinding the "soft garbage": leaves, grass, thin branches, green stems, etc. If you throw dry or thick luxury branches into the shredder, then the knives are quickly blot.
Disk knives are designed for "soft garbage": grass, leaves and thin branches
Milling system of knife
The milling system is more powerful. It is a solid gear in which branches are delayed automatically. It is only necessary to immerse the wood waste into the funnel, and from there they will gradually tighten into a grinding mechanism. Moreover, there is no need to control this process and you can fulfill another job. Milling knives are capable of changing the branches with a thickness of up to 4.5 cm. In many models of such grinders, a reverse is provided and a different level of crushing. But think if you need such a powerful system if you basically develop soft waste. The grass and leaves are better small with disk knives, and in milling systems often get stuck.
The cutter is perfectly grinding dry and thick branches, but the grass can be stuck in it
Garden shredders by engine type
Like most garden equipment, choppers are represented by electrical and gasoline models. Both options have a number of advantages. Consider them in more detail so that you clearly understood what kind of garden grinder is suitable for you.
Electrical models: ease and environmental friendliness
Electric choppers are easy to maintain, so suitable for dachnings with small experience in using garden equipment
Pluses of the electric motor:
- Electric shredders are sufficiently light, so even women can be transferred according to the summer cottage.
- When working, make little noise.
- Easy to maintain.
- Do not throw harmful combustion products into the air.
Minuses:
- They are tied to the outlet, so it requires a multi-meter extension to move around the plot.
- Less powerful than gasoline models. Most are designed for thickness of branches up to 4 cm.
- When interruptions with electricity, they cannot be used.
- When the voltage drops may fail.
Gasoline systems: power and mobility
Gasoline shredders are valued for versatility, because their power is enough and on the grass and on thick branches
Pluses of a gasoline engine:
- The power of the engine is much more powerful. It copes with branches up to 7 cm thick.
- Do not have wires, so they can be put anywhere in the country area.
- When working, make a lot of noise, so that may cause complaints from the neighbors.
- They have a lot of weight than electrical systems, so they are high enough to move.
- Maintenance complex.
- When working, harmful products combustion of fuel are formed, thereby polluting air.
- More expensive at cost and in the process of operation require constant costs for gasoline and machine oil.
Choosing a garden chopper in terms of power
Comparing models and analyzing what kind of garden grinder is better, pay attention to the power of the unit. All shredders are conditionally divided into three classes of power: amateur systems, middle class and professional models.
Amateur choppers
This type includes low-power aggregates (up to 1.6 kW) operating on electricity. Their knife system is disc. Before determining and buying an amateur class, check out what material knives are made. The best option is hardened steel. Such aggregates weigh up to 20 kg and are capable of grinding branches with a thickness of no more than 3 cm.
Medium-power systems
These are intermediate options between amateur and professional models. Such shredders can work both on gasoline and electricity. Maximum power - 2.5 kW. Suitable for private houses and country sites, where the garden is small, but already elderly. The aggregates are equipped with milling knives, so it is easily grinding branches up to 3.5 cm.
Of the advantages of the unit, it is worth noting the system of self-pulling waste, a funnel for mulch and the presence of wheels that allow you to move the shredder on the site
Professional aggregates
This includes large, with a considerable weight of the system that are capable of developing the capacity of almost 4 kW. The engine can be both gasoline and electric (three-phase). Can work for a long time and stick the branches up to 6-7 cm thick. Moreover, the crushed material is subjected to the press, which results in an excellent mulch. The aggregates are equipped with large comfortable funnels, a powerful cutting mechanism of milling type and are able to draw waste without pushing. Due to the high productivity, in the farms, the gardens of a large square, etc.
In order for our garden of garden shredders to be more complete, we will dwell on some nuances of choosing a specific model.
- Going behind the shredder, you must clearly imagine that you will "grind" and how often.
- Choosing a specific model, pay attention to the device of the funnel. The easiest in service is a funnel like a cone and slightly tilted.
- In order to change the waste into different fractions (large pieces, sawdust, etc.), the speed of rotation of the knives in the system should be adjusted.
- It is more convenient to use aggregates, where there are several holes for a different type of waste: in one you will insert branches, to another - grass and leaves.
- Pay attention to the noise level, which gives the selected unit. If it exceeds 84 dB - it will be very sensitive for your and neighboring ears.
- Models in which pre-cut knives are provided for longer and easier cope with different garbage.
- A good supplement will be reverse. If during the operation of the knives, they will be abandoned or caught a very strong branch, then you can stop them quickly and force them to rotate in the opposite side so that the problem debris stretches back.
- In some electrical models, the self-pavement of the shredder is provided. If electricity disappears, and then again will suddenly appear, the unit will not turn on independently. It will save you and especially your children from random injuries.
- Included, the pusher must be given to the shredder, because it is not safe to promote garbage in a funnel.
If the model you chose has mostly listed features and additions, then the manufacturer's name is not so important. Although the products of famous brands are still more reliable because it has been tested time.
With the arrival of spring, each owner of the country area is thinking about the acquisition of equipment that will help in garden work. In the absence of a fireplace or a wood stove in front of the gardener, the task is going - where to give cut branches from the tree? Solve the problem will help the chopper of the branches - on the one hand, it allows you to get rid of dry, with rug - prepare a mulch for soil.
Varieties and scope of application
The technical market there are two types of grinders of branches and grass, they differ in the type of cutting element:
Knife devices
We carry out cutting waste with the help of sharp blades in the form of knives. Excellent coped with thin twigs, grass and dry leaves, as well as other soft garbage from the garden. But large elements with high density can not only fasten the blade, but also to break it.
Milling devices
In the design there are gears, they are a little stronger than knives. Such equipment is able to chop branches with a diameter of 40-50 mm. The minus of such a device is that it is poorly processing soft or too subtle waste, they simply get stuck in the mechanism or wound on the twist element.
In general, the design of both species is arranged on the principle of the meat grinder, different parts are used as mechanical elements. Each options possesses individual advantages and disadvantages.
The knife devices are considered more versatile and are excellent for a small cottage area, while the milling mill breaks and does not stand.
The best models of 2017 are successfully used to perform the following tasks:
Rating of the best garden choppers branches
Before choosing an electric garden grinder of branches, the rating of the best modifications, which differ in the efficiency of work and long-term operational periods.
Ikra Mogatec EGN-2500
The design has 2 blades, a horizontal disk system, an automatic loading element and a device that is responsible for safe inclusion. The grassborder is oriented by 50 kg. German equipment can recycle branches 40 mm in diameter. But in this case it is better to use wet raw materials, since dry will cause breakage.
Benefits:
- available cost - 10 990 rubles;
- warranty period - 2 years;
- high-quality cutting mechanisms made of high-period steel;
- powerful motor.
The disadvantages in this option were not found, except for an increased level of noise, which can deliver discomfort during operation.
Bosch AXT RAPID-2000
Bosch compact grinder has a power unit for 2000 W, which works on reduced transmission. The bandwidth reaches 80 kg / hour, this is a high indicator for the device with a grinding rate of 3,650 rpm. The mass of the device is 11.5 kg, which makes it possible to easily transfer the unit to any place on the plot.
Bosch AXT RAPID-2000
The design has a high-quality mill in the form of a cutting gear with durable teeth. With this modification, you can grind both dry and wet branches of trees with a diameter of up to 40 mm. The device is equipped with a tank at the bottom, and there is also a security system.
- mechanical elements of carbide steel;
- low noise;
- fast crushing branches.
- small particles fall into the mechanism, stopping his work;
- a narrow plug to be included in the power grid, it is required to complement the extension cord;
- insufficient power of the power unit.
The disadvantages also include the presence of too thin synthetic bag, which is easily rushing when the waste is filling.
Video: Bosch AXT RAPID-2000 Work Overview in Field
Viking GE-250
Disk knife system of Viking on customer statements makes it universal. Thanks to this equipment, we can grind weeds, grass, wood branches and bits with a size in a section of 3 cm. The device has a convenient bunker for laying a raw material, which after processing comes out of the hole in the lower area of \u200b\u200bthe unit.
Benefits:
- simple design
- versatility;
- high degree of security;
- the presence of the wheelchair.
Disadvantages:
- cost;
- noisy work.
The maximum power indicator of the power unit is 2.5 kW, which will be enough to work on a small garden plot.
Zuben Zee44-2800
Garden chopper branches Bison is implemented in online stores at an affordable cost - from 11,700 rubles. The device is equipped with the device itself, the wheel chassis with fasteners, the pusher, the waste tank, the key and instruction manual.
Zuben Zee44-2800
The speed of rotation of the cutting elements is 4,050 rpm, the power of the electric motor is 2500 W, the grinding system consists of a rotor with blades. Aggregate is powered by manually. The device perfectly copes with branches with a diameter of 4.4 cm. In this case, you can adjust the grinding level.
- affordable cost;
- silent work;
- good performance;
- powerful power unit;
- equipment and presence of wheel chassis.
- chinese spare parts;
- large weight.
Video: How shredder "bison" works
Grunhelm ES-24
This is a budgetary version of electrical shredders, which has a capacity of 2.4 kW and a double-to-foot mechanism consisting of carbide steel. Thanks to these characteristics, the device is able to easily grind branches with a diameter of 4 cm.
In addition, any soft floral material can be used for processing, whether it is grass, stems, dry leaves, small branches. Such a mixture after grinding can be used as a fertilizer for soil.
Benefits:
- price - 8,000 rubles;
- simplicity in the device;
- little weight - 12 kg;
- compact sizes - 48x28x65 cm.
Disadvantages:
- short warranty period - 1 year;
- poor-quality housing.
All listed modifications have a big difference in price policies and technical features. Select the optimal option should be primarily based on the budget, after which it will be based on the tasks that it will perform in the garden. The Obi online store has a wide range with different costs and opportunities, one perfectly coped with the processing of small garden debris, others are better manifested in working with dense branches.
Video: how to collect shredder do it yourself
To clean the country area from extra branches, trimming shrubs that focused foliage and tops of agricultural plants can be used by a special device called the chopper. Such a product allows you to quickly get rid of all unnecessary without harm to the environment.
What garbage gardens exist?
All shredders can be divided into two classes - electric and gasoline, they are also classified according to the type of knives used:
- The disk system is best suited for working with grass or leaves, she also recycle thin twigs. Thick branches should not be loaded, as this can lead to knife breakdown;
- Milling knives are equipped with gears - they quickly swear branches with a diameter of up to 7 cm, however, the soft garbage will be sweeping on the knives or it will simply be lit.
When forming this rating of the best shredders presented in the Russian market, we took into account a number of features: the ratio of price and quality, the duration of the service life; operational quality equipment; Frequency breakdown and so on.
Shredders appeared in Russia not for too long ago, therefore, there are few information about them, it is not enough for a full choice. We hope that our top 10 rating will help you to purchase the most appropriate equipment that will serve faithfully for many years. The rating is conditionally divided into two parts - in the first we considered the electrical models, in the second - gasoline, as they are too different from each other to be in one top.
Five Best Electric Shredders
This equipment is equipped with a reliable cutting mechanism that allows you to change the branches with a diameter to 4 cm. Also in the design there is a large diameter funnel, thanks to which to load the garden trash will be very convenient. Frame is quite wide, the unit is equipped with a large diameter wheels, due to which it will be steadily standing on the surface of the Earth during operation. Capacity of the garbage collector is 48 liters - for a plot of small sizes is quite enough.
The chopper is equipped with a knife grinding mechanism, it is possible to recycle not only dried garbage, but also fresh cut grass or branches. The engine power is 2.8 kW, it protects it from overloads Special fuse on 16 A. In the garbage collector, you can put large sizes of the trash package, which makes it easier for subsequent transportation. In order for all the work with absolutely safe, the container has a closing contact. The body is made of hard plastic - it is not terribly straight sun rays, moisture, high and low temperatures.
Benefits:
- High power;
- The wheels of large diameter provide good stability on the uneven surface;
- High quality plastic from which the housing is made;
- It works very quietly;
- Reliable and absolutely safe work.
Disadvantages:
- The quality of the knife coming in the kit leaves much to be desired, but if necessary, it can be replaced;
- The feed cable is short enough - you have to use the carrying.
This is a fairly good garden chopper, which is perfect for the country's cottage plots planted with fruit trees and berry shrubs. It perfectly copes with large volumes of fresh cut leaves, branches and bans, the maximum diameter of the loaded material is 40 mm. The unit will be a good helper in the production of compost. The funnel has a significant diameter, which makes it easy to load large amounts of grass and branches in the product.
The container is installed immediately under the shredder, so that the device is characterized by quite acceptable dimensions. This facilitates the storage of the device. The garbage collector has a fastening for garbage bags. The equipment is equipped with a powerful engine, which is driven by a chopping system from two blades. The motor is reliably protected from overheating and other overloads, automatically turns off when the electricity is turned off, without allowing the engine to fail. The shredder is absolutely safe due to the availability of an emergency engine stop system.
Benefits:
- Carefully crushes her plant material, making it suitable for cooking humus;
- Reliable engine with multiple degrees of protection.
Disadvantages:
- Knives are quickly clogged, because of which they will have to constantly clean;
- Weak fastening of wheels.
3. Patriot Garden PT SE24
This is a model from the German manufacturer who has long managed to establish itself in the market of gasoline equipment and electric tools. The main performance indicators of the product is the high power of the motor, which is about 2.5 kW, which provides good performance.
The speed of rotation of the knives at maximum revolutions is about 4500 per minute. The mass of the device is only 14 kg, which facilitates its transportation on the site, it is capable of working from an ordinary household electrical network. Included there is a stand on wheels, a pusher for grass and branches, there is also a screwdriver and a hex key for assembling the device - they will be useful and if it is necessary to clear the unit.
Benefits:
- Good assistant in the country area;
- Rich equipment;
- Reliable build quality;
- Wide frame and wheels of large sizes;
- During operation is not too much noise;
- There are no harmful exhausts.
Disadvantages:
- In the absence of electricity, it will not be possible to use on purpose;
- The length of the cord is small, because of what you have to resort to extension cords.
One of the most powerful electrical devices that is characterized by a long service life. Universal unit, allowing it to cope with both gross branches and a young piglery. The design works quite quietly for its capacity - more than 3 horsepower, and it is also almost vibrating. The loading funnel is characterized by a significant diameter, which allows you to quickly lay large volumes of vegetation, there is a spray protection system.
In addition, there is a knife blocking function: when the protective casing is opened, the mechanical fuse is triggered, stopping the operation of the motor. The running part is wide, which facilitates its movement and does not allow turning even on the uneven surface. Knives are arranged using the Multi-Cut 250 technology, they work on a turning and discontinuous principle, there is a crusher. The engine is reliable and powerful, which ensures the durable work of all elements of the device. Knives rotate at a speed of 2800 revolutions per minute.
Benefits:
- During storage, it takes a minimum of free space;
- Crushes very high quality;
- Wheels are comfortable, easy to roll from one place to another.
Disadvantages:
- When chopping fresh grass or small twigs, knives are quickly clogged;
- Noisy;
- The kit does not provide a pusher.
This is the best chopper equipped with an electric motor. The leader of the rating was helped by a high bandwidth, a minor mass, an attractive appearance. The device weighs a little, so it is convenient to move from one place to another.
The unit is equipped with an electric motor POWER DRIVE with a power of 2 kW, it provides the sound frequency of knives to 17500 per minute, and the speed remains constant, regardless of the degree of workload. Within an hour, the design is capable of recycling about 80 kg of grass or branches, including freshly. The blades are high-quality, sharpened by a laser during production, differ in a long service life - about 70% more durable compared to similar products. The shredder has a convenient pusher, a significantly accelerating process of work. The weight is only 11.5 kg, there is a comfortable handle and wide wheels.
Benefits:
- There is a wide funnel, providing easy loading of large volumes;
- The engine is reliably protected from overload and voltage drops in the power grid;
- Reliable knives;
- Compact dimensions.
Disadvantages:
- There are no exception to a narrow exit for crushed material.
Five of the best gasoline shredders
The device is equipped with a powerful gasoline engine, which makes it absolutely independent of the power supply. The loading hopper of large sizes, due to which it is possible to load the branches of a large diameter, in addition, there is another receiver that is placed on the ground. It is convenient to rack the garbage directly by rables, it will be tightened to the type of vacuum cleaner, after which the waste is grinding almost into dust.
The engine is compact, equipped with a valve system closely located to each other, which increases the number of revolutions, reduces the fuel consumption. The engine has a silencer who makes the work as quiet as possible, saves oil.
Benefits:
- Offline work;
- Low fuel consumption;
- Ergonomic handle adjustable in height;
- The volume of the garbage collector is 50 liters.
Disadvantages:
- A significant mass is about 29 kg, which makes it difficult to transport in the site.
4. Patriot Garden PT SB76
This unit is a multifunctional design with a brand brand Brand & Stratton and is used to thoroughly grind dry and semi-dry branches, burgters, various vegetable waste. The upper funnel is designed to load fresh, wet or soft material, as well as branches with a diameter of up to 1 cm. Grind the branches, whose circle is not more than 76 mm, and it allows a separate receiver into a chips.
The device is equipped with a reliable stainless steel housing, which is characterized by high assembly quality, due to which this product is absolutely safe during operation. The motor power is 6.5 horsepower, the highest speed of rotation of the knives is 3600 per minute. The product is sufficiently heavy - weighs about 70 kg, so there is a special fastening for transportation, which allows you to carry it as a trailer to the car.
Benefits:
- Good assembly quality;
- High power;
- Performance;
- Long service life.
Disadvantages:
- Big mass;
- While working is very noise.
This design is designed specifically for only cut grass, fresh branches and leaves on country sites. The main work element of the device is a four-stroke engine with a capacity of 2.5 horsepower. It starts at the expense of a manual starter, it has a long service life and excellent reliability. The fuel tank accommodates almost one and a half liters of gasoline - the manufacturer recommends pouring at least AI-92. Cutting discs are located on the crankshaft.
The branches are cut with flat knives, and smaller waste is passed through a V-shaped knife. Grinding waste goes through a special pipe and fall into a bag of 10 liters. The maximum diameter of the loaded fresh branches is 28 mm, laying the waste of larger diameter or dry garbage is categorically prohibited, since because of them, the knives will quickly come into disrepair.
In the kit there is an ergonomic pusher, comfortably falling into the hand. He will not even have to prescribe a lot. The whole design is located on a metal base, which makes it stable even on an uneven surface. Equipment weighs only 16 kg, it is convenient to transfer it from one place to another.
Benefits:
- Acceptable cost;
- Reliable work;
- Very sharp knives;
- Easy to maintain.
Disadvantages:
- It is possible to work only with fresh material;
- In some models, knives are under a small angle to each other, because of which they can dwell.
One of the highest choppers branches based on a gasoline engine. Moves in the country area due to the presence in the design of two metal wheels. The device has a small mass, which makes it the most mobile among all gasoline shredders.
The design has good quality assembly, sharp knives, are located in parallel to each other, moving at a speed of about 4000 revolutions per minute. This allows processing not only vegetable garbage, but also of different kinds of household waste - polyethylene, plastic and other unnecessary trash. The maximum diameter of the branches that can be placed in the receiver is 45 mm, the weight of the device is 44 kg. Works on the gasoline of the brand is not lower than AI-92.
Benefits:
- Modest overall dimensions;
- High power - 3.2 horsepower;
- Reliable protection system for injury;
- During work, there is not too much noise.
Disadvantages:
- High price;
- Knives periodically encourage.
At the cottage and garden plot periodically have to make cleaning - to clean the foliage, tops, stems, trim shrubs and trees. All that is softer and bedding goes to a compost bunch, but it transfers it for a long time - several years. From larger branches, it is necessary to get rid of more radical methods - to export or burn somewhere. In general, it is a regular headache. And the garden chopper can solve it. It grinds branches and vegetable waste with a small fraction that rotches faster or can be used as a mulch.
Appointment and opportunity
The appointment of a garden chopper is to grow branches and vegetable waste into small pieces. The size of "pieces" in each of its brands. Moreover, it can change different models of one manufacturer. Conditionally garden chopper mono divided into three categories:
When choosing, you need to focus on what waste you have more. If you have a lot of vegetable garden and shrubs on the site, your choice is a grass grinder. They have knives designed so that they are not clogged when processing dry or "fresh" plant components. If the site is reserved for the garden - you need a chopper branches. When choosing, pay attention to the maximum diameter of the recycled waste. Well, if there is a vegetable garden, and the garden, you need a "wagon", which can cope with hard branches and with grass.
Garden chopper is a housing in which the motor and grinding system is hidden. To the top of the case attached a funnel for feeding raw materials. It can be wider and already - depending on the destination. For feeding herbal residues and foliage, a wide funnel is more convenient for branches - narrower.
Grinding waste is poured down from the bottom - from a special opening. There are aggregates with a plastic tank, there is a soft bag. Plastic use is convenient, but it increases the size and mass of the unit. Soft container for recycled is a bag. He almost does not take place and does not add masses, but it's not so convenient to use it. There is a third option - in general without a container. In this case, you can choose to your liking or use both types - which is more convenient.
Criterias of choice
The choice of any technique is the point responsible and not easy. It is necessary to take into account many criteria. In the case of the choice of garden grinders, it is necessary to consider not only technical parameters, but also such "subjective" indicators as the convenience of carriage. The device will have to move on the site - to the place of waste accumulation, roll out / roll out of the shed for storage, so the location of the handles for transportation and the size of the wheels are considerable.
Technical specifications
The initial selection stage is the choice of technical parameters. The selection of the model depends on the appointment of the unit and the tasks that it should decide. If the branches are prevailing, you need one type of unit if the grass and foliage is completely different.
Engine Type and Power
Garden chopper branches and grass can have an electric or gasoline engine. Devices with an electric engine weigh smaller, work quieter, do not have an exhaust. But their mobility is limited to the length of the cord and the presence of connection points. There is still the ability to use extension / carrying. Power of electrical garden shredders - 2-5 kW. Usually these are household models with not the highest price tag.
The garden chopper with a gasoline engine can move to anywhere, but it is more difficult, and the design itself is more massive, since the engine is larger. To its mass, it is necessary to add more a lot of fuel poured fuel, so it will be the weight of the product ready for the operation of the aggregate. But the engines put more powerful. These models are much more expensive - the price starts from $ 750, but they are more productive and can be used by enterprises.
Gasoline garden chopper - equipment more serious and expensive
In addition to the type of engine, it is necessary to pay attention to its power. It is necessary to watch the claimed capabilities (maximum diameter of the processed branches) have been confirmed by the engine power. Middle Indicator - 4-6 hp
According to reviews, a useful feature is the possibility of reverse. The opposite move allows you to fix the unsuccessful branch that blocks the shaft. It accelerates and facilitates work, but the cost of such aggregates is slightly higher.
Garden chopper: cutting part type
The performance and dimensions of the processed branches depend on the type of cutting part. It happens three types:
- With two or more knives. The simplest models are equipped with two knives that stand in a horizontal plane. Such models are grinding mainly grass and small branches - up to 2.0-2.5 cm in diameter. More complex are equipped with four or six knives and they can stand in a vertical and horizontal plane. Such are already coping with more serious tasks.
Models with knives - the simplest and inexpensive
- With worm-type crusher. In these models, the cutting part looks like a screw that stands in a meat grinder. It is only put, mostly, vertically and has fewer turns. A garden chopper with a cutting part of this type is running faster, well copes with dry and freshly carved twins of a larger diameter (about 4 cm). He is good and when working with grassy residues, but the grass can pour onto a screw or sweeping on it, so periodically knives have to be cleaned. Garden shredders of this type belong to universal. Examples of popular models - Bosch Axt Rapid 2200.
- Cylindrical cutting unit with lots of knives. It is called the "multi-skin cutter". This is the unique development of Bocsh and others have not yet found. It is equipped with universal garden choppers, so if you need such a model, you will have to choose between this cutter and worm. Knives of this type are coping with fresh or dry branches, vegetable residues. Only Liana can be filled, and even then only if the knives fumbled. Such knives are on Bosch AXT 25 TC.
- Cutting shaft. A more powerful crushing node allows you to polish even thick branches and bruises. They are equipped with garden choppers for branches. The maximum size of the processed boughs is -5-8 cm. This is a speech about household models, because the semi-industrial and industrial can cope with thicker. The problem is that they and dimensions, and cost, have appropriate.
The choice of the type of cutting node is determined by the tasks for which you need a unit. Pay special attention to this in order not to regret buying.
Ease of operation
There are many parameters that should also be taken into account when choosing a soda chopper. They only seem insignificant, but affect how convenient you will work. And this is important. This is what we pay attention to:
All these "minor" details affect the work, and this is important, as it is usually necessary to engage in the processing of hours. Being in an inconvenient position or transfer the aggregate bent, it will not work and the torment.
Models and reviews
The choice of technical parameters is nothing compared to the manufacturer's choice. In this case there are two guidelines: brand fame and owner reviews.
Famous manufacturers
The brand is good, but the equipment of famous brands is worth a lot. If it does not scare you, everything is easier. Choose from brands. Garden garbage choppers produce such well-known firms:
- Bosch.
- Viking.
- Al-Ko.
- Wolf Garten.
These manufacturers can take any unit, just carefully read what kind of goals it is intended - more for branches or grass. For example (according to owners):
- Garden chopper Bosch Axt 25 D copes well with dry branches, and with fresh cuts you have to mess around for a long time.
- Bosch AXT 25 TC copes well with large branches at factory settings. In order for it normally disassembled with small branches and liaans, you need to pull up adjustment until it stops (it is in this model).
- Bosch AXT Rapid 2000 has excellent reviews - rubit branches, but the grass is not very friendly. It was good huskrynik, bushes, even young trees.
- Bosch ATX 18-35. Power 1800 W. It has auger as in a meat grinder, and the field of it costs another knife. Rubit is large, but it copes well even with branches of 45 mm diameter.
But if you choose to your tasks - they have excellent reviews for them. As well as Vikinga (150, 250, 350). Vikings are generally recognized as omnivorous, as all (bumps, huskits (lying), corn, sunflower, old stems of colors, raspberry trimming and blackberry, leaf and grass) are hammer. But they are high, especially 250 and 350 model.
Models of unknown marks
Of the less famous and cheaper well shown:
- Ikra Mogatec EGN 2500. Rubits everything and very quickly, the fraction is small. But, as long as knives are not blown off. New in the usual not to buy, only in service centers.
- MacAllister 2800 W. Even the remains of the boards, the chips are large - 2-3 cm. Fresh branches cut faster, fresh - slower, some of them remain crumpled short sausages. The size of the branches is up to 4 cm. When working, the noise level is high - 99 dB.
- Stiga Bio Quiet 2100. Works quietly, grinds into pieces of centimeter 2 long, if the branch fell horizontally, jump out longer pieces. In the kit there is a bag, but it is not even something to hang on, put the box. So that when working on the bottom lattice, the recycled, it had to trim it by the secateur. In general, the design of the "jams" with Bosh 25 D. Conclusion based on the results of work, who needs to grind the tops - look for another machine. This one is for branches.
- Skill garden chopper. With the branches of willow, up to 3.5 cm coped with a bang. With dry currant branches, it went worse-and branchy. When working with dry branches, performance drops.
- Gasoline chopper Earthquake 9060300 branches. It has two receiving bunkers - for branches and large - for foliage. It worked for the season of the clock 35. Disadvantages - big and heavy, rolling is still fine, but to ship in the car problematic, hard tauralitis, so we need glasses and headphones. Three types of knives are two disks. The first with straight, the second - with triangular and g-shaped.
- Patriot. While worked for 3 days (almost full of light). Normally rubs the branches and young trees. The branches delays himself, but the effort is not too big.
- Sterwins 2500. For the season they made about 200 buckets of mulch. Recycled raspberry, cherry, IRGU, plum, apple tree, deren, Ivu, bubbler, birch. With continuous operation every 15-0 minutes, thermal protection is triggered. After cooling, you can work again.
There is probably other not too expensive and normally working garden shredders, but before buying them carefully read as much reviews as possible. Take into account only those that are given with our own photos and details that do not caught from the description.