No doubt in more degree Photoshop program aims to make the pictures and photos loaded into it brighter and more contrast. However, as many users exist, there will be as many requests that they make. And if any other editor can not cope with even a tenth of these requests, then nothing is impossible for Photoshop!
One of the frequent wishes of users today is the conversion of a color image to black and white. Undoubtedly, a bleached image sometimes looks much deeper than a bright one, which is why it is extremely popular. Fortunately, there are a lot of ways to do this, I propose to get acquainted with the most popular ones, and finally find out how to make a picture black and white in Photoshop.
The easiest ways
Conditionally possible ways Discoloration of the picture can be divided into two groups: those that lie on the surface and those that not every user knows about. By the way, I'm using Photoshop CS6, but the tools I use are also in earlier versions. Which of their versions is better for beginners has already been told here.
As you can see, both methods are very easy to implement in practice, and this does not require special knowledge. However, there are some nuances that need to be taken into account, namely, that the image is very dim, it has a low contrast, and this parameter is so important for a B/W photo! If you, like me, are not satisfied with the resulting image quality, I offer another option on how to improve it.
More complicated way
We will again work with the "Image" section: so, click on it, in the drop-down menu, find the "Hue / Saturation" item. A new window will open in front of you, in which you need to find the Saturation field, then move the slider to the left until it stops, so that the value reaches -100. As you can see, the image turned from color to black and white, but at the same time, it did not lose its depth, and therefore, the contrast too. By the way, from this photo you can
Hello everyone! We continue to conquer the basics of working in Photoshop. Today I have prepared a lesson for readers on the topic How to turn a color photo into black and white.
Sooner or later, while processing photos and images in Photoshop, we are faced with the need to turn a color photo into black and white. Therefore, I decided to prepare this short lesson for my readers to show how this is done visually.
There are many ways to perform this operation. As part of this mini lesson, we will not consider the methods used by professional photographers, we will consider the most simple and quick ways How to turn a color photo into black and white. In the future, in future lessons, we will definitely return to this topic and see other ways, more complex and professional, used by advanced users of Photoshop.
We will get to know 3 ways converting color photos to black and white, I’ll say right away that these methods are not professional, the quality after processing by them is not the best, but these methods are quite suitable for novice users to learn.
So, I propose to move from words to deeds. First, let's open the image we want to make black and white.
Now let's start processing. I present to your attention the first method.
Method #1:
Converting a color photo to black and white using the "G" function grayscale".
To do this, we need to go to the top menu: Image/Mode/Grayscale. A window will appear with the question “Delete color information”, click delete and our photo has become black and white.
We go to the menu Picture/Modes/Grayscale
Very fast and easy, right? We move on.
Attention! Remember that you can always return an action back with the hotkeys CTRL+Z. Let's move on to the second method.
Method #2:
We turn a color photo into black and white using the " Discolor".
We rise to the top menu of the program and go to:( Shift + CTRL+U ) . See below the result of the operation.
Go to the top menu Image/Correction/Desaturate or press hot keys Shift+Ctrl+U
Method #3:
Making a black and white image using an adjustment layer " Black and white»
This method is also extremely simple and fast, its advantage is that when using adjustment layers, Photoshop makes changes and corrections to a special adjustment layer, and not to the original image, which we decided to make in black and white. We also have features such as: reverse the entire editing process, control the opacity of the layer, turn the visibility of the layer on and off. This method allows you to get a more beautiful black and white image, unlike the previous ones.
Step 1:
So, the photo is already open for us. Now go to the panel "Correction", if it is closed for you, then open it through the top menu Window/Correction. We find in the panel " Correction» adjustment layer « black and white” and click on it.
To open the Adjustment Layers panel, go to the top menu Window/Correction
Step 2:
After you click on the adjustment layer " black and white“, our image has been converted to black and white and a window with sliders has appeared. In this window, with the help of many simple parameters, you can adjust the black and white effect to your liking. Move the sliders until you get a sharp black and white image. Moving the sliders to the right colors areas that were previously colored with the slider's color a lighter shade of gray, while moving the sliders to the left colors areas a darker shade of gray.
At the top of this window, you can select pre-made sets or create your own set and then save it via the "triangle with stripes" menu, which is located in the upper right corner of the window. If you click on the " Auto“, Photoshop will automatically select the options for how it thinks the black and white image should look. Here's what happened to me.
Here's what happened to me
That's all for today, try to train everyone 3 ways and write about your results below in the comments. See you in the next lessons!
We are already accustomed to seeing all the photos in bright colors. Modern technology allows you to keep a colorful picture of life as a keepsake. But sometimes it is a monochrome photo that creates the right entourage, conveys the atmosphere of feelings. In color photographs, brightness sometimes distracts attention from the important subject of the picture. The black and white version in some cases helps to make objects more expressive, more attractive. Some fans are wondering how to make a picture black and white in Photoshop, how to discolor it.
One of the ways to artistically process a photo is to make it monochrome.
Adobe Photoshop allows you to change color photo, making it black and white, in several ways. Either way, you'll need to first create a copy of the "Background" layer. Then choose the option of how to make a black and white photo in Photoshop that is convenient for you.
1. Grayscale
With the image open in Adobe Photoshop, go to the Image section. There, click on Mode (Mode), in the list that appears, select Grayscale (Gray gradation). The image became black and white.
Very fast, easy way, but the quality will be low, the contrast is low here.
2. discoloration
You can use another simple trick in Photoshop. It is also fast and easy to perform. In the same Image section, a little lower is the Adjustments function (Correction), in the list, select Desaturate (Discolor). You can perform this operation by pressing Shift+Ctrl+U.
Picture not High Quality will come out, with low contrast, flat, somewhat dull, but the main task - to make the picture black and white - will be completed.
3. Channel mixing
The above methods are easy to perform, but still, a black and white image first of all attracts us with contrast on high level, depth. How to make a black and white image in Photoshop so that it is of high quality? It's not enough to just desaturate here, you need to use several color saturation adjustment layers. The original image is not changed with this option. Follow this algorithm:
- Open the Channels tab in Photoshop next to the Layers tab. Click on different channels (red, blue, green) in turn, you will see the difference in the resulting images. The photo has become black and white, the saturation of a certain color you have chosen changes. You will see on which channel the image is blurred, contrast is lost;
- Open the Channel Mixer in Photoshop by going to Image - Check the Monochrome box to get a monochrome image. Move the sliders to select the desired color saturation. General value leave it at 100% if you don't want to change the lightness of the photo, or 110% for a lighter image;
- You can generally darken or lighten the image by adjusting the Contrast;
- Apply the selected settings by clicking OK.
So, you managed to make a deeper, more saturated image than when working with automatic color-to-black-and-white conversion.
4. Use of channels
You will receive a high quality photo with the following processing:
- Open the picture;
- Duplicate the layer by pressing Ctrl+J;
- In the Layers tab, instead of Normal Soft Light, set the soft light mode;
- Merge the layer with the bottom one, you can use the Ctrl + E combination;
- On the toolbar on the left, click on the small black and white squares next to the color settings (Default Foreground and Background Colors) or just press D;
- Create a gradient map;
- Follow the path Image - Adjustments - Gradient Map. Click OK;
- Go to the Channels tab. Select the Red channel there (red);
- In the menu, select all (Select - All) or by pressing Ctrl + A;
- Copy the selection with hotkeys Ctrl+C;
- Select the RGB channel and paste the copied from the red channel into it with the keys Ctrl + V;
- Return to the Layers tab. Set the new layer to Soft Light mode, set the opacity to 50%;
- Merge layers with Ctrl+E.
It takes longer to edit a photo in this way, but the quality, saturation is much better.
Leave a part of the image in color on a black and white photo
The easiest way is to use the archive brush. You need to desaturate the photo using any of the above methods, usually Shift + Ctrl + U is used. Then take the tool History Brush Tool (Archive brush) or press Y, set the transparency, size - and return the color to the desired details. You can make any details in color, they will stand out brightly against the monochrome background of the image base.
Good day to you, my dear readers. I recently looked through my childhood photos here (up to 6 years old) and how many of them were black and white. It used to be a common thing, but now there are no pure black and white cameras, but still, sometimes it’s very nice to look at a photo without color. In some cases, it is even more pleasant to look at. Don't you think so?
Many cameras have a non-color shooting function (b / w, sepia, etc.), but in this article I would like to tell you how to make a picture black and white in Photoshop. It doesn't matter what kind of picture it is. The main thing is that this function still remains and no one is going to refuse it. By the way, in my article about I just used the effect of turning a color photo into black and white. Remember?
So let's get started! What do you want to convert to b/w color? Personally, I want to discolor the car that I showed you in the lesson about .
The easiest way to desaturate an image is through the Image menu. To do this, go to the menu "Image" - "Correction" - "Desaturate". After that, the photo instantly removes all the colors.
Grayscale
This method is similar to the first and it will also be easy to perform. You need to enter the "Picture" menu, then select "Mode" from the drop-down menu, and only then "Greyscale".
Voila! Your black and white image is ready.
Both methods are the easiest, but not the best. For a more subtle transformation, it is better to use other methods.
black and white
This method is convenient in that we can correct the image as we need, so the quality of the output photo will be better.
Go back to the menu "Image", then select the word familiar to us "Correction", and at the end feel free to choose "Black and White ...".
As you can see, our image has become black and white, and at the same time, various sliders with the name of the colors have appeared. With the help of them, we will correct our b / w image. Try moving different sliders in turn and you will see that the contrast and image quality change, and in separate sections. Each section has its own color.
Thus adjust all the colors until the image has the best saturation and contrast. Voila.
Just do not click on "Hue", otherwise you will not get any black and white image. If you do not want b / w, but want in yellow or other colors, then please.
Adjustment layer
Most The best way creating a black and white image from a color one - create an adjustment layer. But here, too, there are several different ways such a transformation.
Channel mixing
black and white
I'll take a quick look here, as this method is identical to the Black and White method we did above. Only here everything happens through an adjustment layer.
Well, in general, these are the ways I wanted to show you. Hope you get enough.) If there are any questions, then ask. I will gladly answer them.
In addition, I would like to recommend the wonderful photoshop video tutorials for beginners. Everything you need for a beginner is collected here, the material is presented superbly and everything is told in great detail. Each element is broken down into bones, so you will know Photoshop completely. So be sure to check it out.
Well, for today I say goodbye to you. Tomorrow is a new day and a new lesson. And sleep soundly tonight. Most importantly, do not forget to subscribe to updates of my blog articles. Good luck with your learning and everything else. Bye Bye!
There are many ways to do black and white photo in Photoshop, from simple in two clicks, to complex ones. Among difficult ways working with the color of a photograph is practiced to achieve the desired contrast or softness of a black and white photograph.
The video shows 5 options on how to make a photo black and white in Photoshop CS6 (under the video instructions for earlier versions of Photoshop):
1. How to take a black and white photo with Hue/Saturation
The easiest way to desaturate a photo in Photoshop. By pressing the Ctrl + U keys simultaneously, we call up the Hue / Saturation settings window, where the Saturation parameter is responsible for the color saturation, so we remove it accordingly. The result can be seen below.
2. Like Grayscale
For real simplest way make photo black and white, in one click. In the top menu select Image=>Mode=>Grayscale. The result is almost identical to the previous method, see photo below.
3. How take a black and white photo with Channel Mixer...
One of the most right ways make the photo black and white. Like color filters, when photographing on black and white film, it allows you to play with shades in Photoshop.
Let's take a closer look, in the top menu - Image=>Adjustment=>Channel Mixer. In the settings window, in the lower left corner, check the box next to Monochrome. Next, turn the knobs of each of the three color channels to obtain the desired contrast and shades. There is one rule here, the sum of the values of all color channels must equal 100. Below I have given an example with the results of three "rough" settings.
4. How take a black and white photo with Gradient Map
A way to convert a photo to black and white with increased contrast. In the top menu of Photoshop, select Image => Adjustments => Gradient Map. By changing the smoothness of the gradient flow from black to white, we get its “reflection” on the contrast of the photo. It is very interesting to play with shades here.
5. How take a black and white photo withMixed way.
The most sophisticated way to make a photo black and white. As you already understood, the shades and contrast of a black and white photo, when transferred from color to Photoshop, can be adjusted with the color settings of a color photo. The translation method with adjustment layers has a distinctive flexibility. To do this, create adjustment layers in the following sequence (from bottom to top):
Hue/Saturation
- Selective Color (selective color setting)
- Gradient Map (translation to bw, obtained using the previous settings, a color image)
- Curves (shade control, Overlay layer blending type, set in the Layers window, F7 key)
This method is as flexible as possible, it makes no sense to show examples.