Many of the houses have old dining or kitchen tables, usually polished or wooden and have a completely out of fashion look. Do you want to throw it away? Not worth it! Why spend money on a new table, especially the older tables are much better than modern ones and can last for many more years
In this article, we will show you 4 universal ways to update an old dining table with your own hands without spending too much on your family budget!
The main methods of restaurant are the following:
- Painting the table (usually a special paint is used for wooden surfaces, it can be either acrylic-based or enameled)
- Replacing the countertop (the tabletop can be ordered ready-made to size, or you can make it yourself, as shown in the master classes below)
They can be applied singly or combined depending on the damage and condition of your furniture.
Updating the kitchen table top
Take a look at your dining table. If its general condition more or less satisfies you with its appearance, but the tabletop is completely worn out or the tabletop simply cannot be removed without damaging the entire structure, this master class is definitely for you.
Materials:
- White enamel paint for wood;
- Deglosser;
- Water-based polyurethane varnish matt (you can use glossy at your discretion);
- Boards;
- Liquid Nails;
- Wood putty;
- Fine sandpaper;
- Brush, cloth, water.
Restoration instructions
Step 1: remove the old paint
- Treat the table legs with deglosser.
- Thanks to this tool, you do not need to sand and peel off the old paint, but simply apply it on top, wait for it to dry and paint it in the desired color.
- Apply 3 coats of enamel paint and wait until it dries completely.
Step 2
- Turn the table upside down. If you removed the legs for painting, then it will be more convenient for you to paint the bottom of the tabletop and the side wooden fixtures.
- Apply deglosser and paint as you would on the legs.
After drying, turn the table back over and paint the tabletop around the edges, taking 10 centimeters, it is not necessary to paint everything over.
Step 3: lay out the new board from the boards
- After complete drying, measure the dimensions of the countertop, its length and width. Boards should be slightly larger in size, centimeters 5 times higher than the future base e - countertop.
- Take liquid nails and spread them evenly across the middle of the table. Then start from the number of boards you have.
- If their number is even, for example, 6, then they should dock exactly in the middle... In the case of an odd number, it is the unpaired board that you should put in the middle. Again, see how it works best based on the size of your specific table and boards.
After gluing the middle, glue the remaining boards on the sides. Leave the table to dry for 12 hours or 24 hours, depending on the adhesive.
Step 4: Putty
- Be sure to fill the gaps between the boards with wood putty, otherwise food pieces will get stuck in them.
- You can smooth it out with your finger, but wipe the excess with a damp cloth.
TIP: Let the putty dry for a couple of hours, and then sand all the boards with fine sandpaper.
Step 5: polish
- Wipe the boards well, leaving no dust or debris on them. Take a polyurethane varnish, stir it and apply long strokes to the boards. Try to make the first layer thin.
- Leave the countertop to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
Step 6: whitewashing
Once the varnish is dry after the last painting, start preparing the paint. In this case, a whitewashing effect is planned, to achieve it, mix 1 part of paint with 4 parts of water.
Use a brush to paint over an area of the board, and then immediately wipe with a cloth. Paint the entire countertop like this, then add some more water to the paint and walk again.
Once completely dry, the table is ready for use.
How to upgrade a polished table
If a small polished table has been gathering dust in your corner for a thousand years, which is high time to be sent to the dump, but your hand does not rise, then you should pick up magic tools and become a fairy godmother for him.
Materials and tools:
- Sander;
- Sandpaper;
- Stain;
- Gel for paint remover;
- Plastic scraper;
- Brush;
- Water based polyurethane varnish;
- Dark enamel paint;
- Drawer handles.
Work order
Step 1: remove the old varnish
- Dress in closed clothing and shoes. If the legs are removable, separate them from the table top for ease of sanding.
- Sand all parts of the table well, getting rid of all dents and scratches.
- Small parts, as well as places where the table can be damaged, sand with sandpaper.
Step 2: apply the stain
Apply the stain you like to the prepared parts of the table, following the instructions. Allow time for drying, depending on the chosen stain.
Step 3: finishing the table shelf
- Use a paint remover gel to clean the shelf.
- After applying it, wait 4 minutes (depending on the gel) and gently, with a plastic scraper, clean the shelf, being careful not to scrape the wood.
- Then apply the stain.
Step 4: varnish surface
- Wipe all parts of the table well, without leaving dust and debris on them... Take a polyurethane varnish, stir it and start applying in long strokes.
- Try to make the first layer thin... Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
- You can, after drying, apply a third coat, but no more.
Step 5: painting the table
- Paint the table in the color of your choice, wait for it to dry, and assemble it.
- Screw the handles into the drawer of the table.
Agree that the result of the work done is impressive!
How to paint a wooden table white
One evening, after looking around, you realized that you are among the monochromatic gloomy things? Looking to freshen up a room and don't know where to start? White wood furniture always looks very impressive and expands the space.
You can make a white table from absolutely any color. In this master class, we will show how to paint from a black table to white.
Prepare the following:
- Means for removing paints and varnishes;
- Degreasing agent;
- Plastic scraper;
- Fine sandpaper;
- Brush;
- Polyurethane varnish;
- Enamel paint.
Work order:
Step 1: remove the old paint
- It is necessary to remove the old layer of varnish from the tables. To do this, we will use a paint and varnish remover. To keep yourself safe from harmful chemicals, wear protective gloves, a mask, and goggles.
- Apply the product to the paint removal sites. Depending on the instructions, wait for the specified time and start carefully removing the paint coat, being careful not to scrape the wood.
- After removing all the paint, degrease the surface with a special solution.
Step 2: sanding and varnishing
- Sandpaper the entire surface of the tables. Then wipe them off well from dust.
- Take polyurethane varnish, stir it and start applying in long strokes. Try to make the first layer thin.
- Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
Step 3: painting the table
Wait until the varnish is completely dry and start applying paint. Paint in 3 coats and leave to dry for 24 hours. After that you can arrange tables and please the eye with a new thing.
Loft style wooden dining table
Nowadays there are very fashionable tabletops made of wood with legs in a contrasting color. Such tables came to us from the Loft style - it is distinguished by its simplicity and a little roughness. But these wooden tables will really suit any interior.
We are watching a master class on how to make a stylish loft out of an old table.
Tools:
- Saw;
- Boards;
- Polyurethane varnish;
- Brush;
- Enamel paint;
- Liquid Nails;
Installation technology
Step 1: cut the boards
Measure the dimensions of the countertop, its length and width. The boards should be slightly larger in size, 5 centimeters higher than the future base - the tabletop
- Cover the prepared boards with polyurethane varnish. To do this, stir it and start applying in long strokes. Try to make the first layer thin.
- Leave the boards to dry for 24 hours, then gently sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
- After the varnish has dried, paint the boards with 2 coats of enamel paint and leave to dry for 12 hours.
Step 2: Installing the countertop
- Prepare your old countertop by sprinkling some sand on top of it and wiping it down with a cloth.
- Once the paint is dry, apply liquid nails to the old countertop and start gluing the painted boards to it.
- To make the boards stick well, put a load on the countertop and leave it for a day.
The result is a great little Loft-style dining table!
You can freshen up the interior even by slightly updating the old thing. You shouldn't spend a lot of money on buying a new dining or coffee table when you have the opportunity to do it yourself. By adding a little imagination, you can decorate the table just amazingly with the help of stencils.
And if for the company with the table you , then you will make your guests envy - after all, you will have an original, unique collection of furniture that can even be called designer if you try and decorate it. Create to amaze!
Do you have a favorite, convenient and comfortable kitchen table, but its appearance has not been pleasing for a long time? Do not despair, but give him a second life. Kitchen table restoration is a great solution to refresh the interior of your kitchen without parting with your favorite piece of furniture. Here are some tips on how to upgrade your kitchen table and save a lot of money.
Of course, if your table is hopelessly broken and beyond repair, all the efforts you make may not be justified. But more often than not, a correctly selected restoration method helps to bring your favorite furniture back to life, changing it beyond recognition.
This is one of the most proven and readily available technologies that allows some furniture elements to return to their beautiful appearance and presentability. To renovate an old kitchen table, you will need the following materials and tools:
- grinder with different attachments;
- mask, glasses and gloves;
- putty;
- putty knife;
- primer for wooden surfaces;
- brush for primer, varnish and paint;
- alkyd enamel paint of the required color;
- varnish or wax.
Now let's move on to the main stages of work.
Inspection of the table and identification of significant defects
At this stage, inspect the integrity of the table legs and mountings, check if the table top is defective or damaged. If the table is found to be loose, try tightening the connecting bolts. If such an action does not give significant changes, you will have to completely disassemble the table, sand the irregularities and gaps, grooves and joints, apply glue for greater reliability and fix the glued parts with self-tapping screws.
If the table legs are completely out of order and repair is impossible, you can perform a complete replacement with more modern ones, for example, metal or carved, wooden ones - it all depends on the interior design of your kitchen and the chosen style. Broken fasteners must also be replaced. Keep in mind that remodeling a table is not only about changing the look, but also about making the structure more robust. Don't forget about it.
Removing the old coating
Next, you have to remove the old coating - varnish or paint. Put on the mask, goggles and use the grinder to start sanding. You can use coarse and medium-grained sandpaper, but then you need to tune in to a long and laborious work - removing paint or varnish in this way is not an easy and not quick matter. It is best to do this work outdoors or in a well-ventilated area. If you do decide to sand the table in the kitchen, open the windows fully and cover the floor and all the furniture around you with cloth or paper.
Cracks and chips treatment
After sanding, you need to clean the old kitchen table from dust and inspect the countertop for defects. All chips and cracks must be putty, and after the putty is dry, sand the entire surface again. The fact is that even the smallest defects will be clearly visible after painting. After much effort, the resulting cleaned kitchen countertop is ideal for creations and new designs.
Table surface priming
After polishing the countertop and other table elements, it is necessary to degrease everything, and after drying, apply a primer mixture. In no case should this stage be skipped, otherwise the paintwork will be uneven and short-lived. The primer mixture is applied in two layers, each layer must dry well before applying the next. After the second layer has dried, it will take about 24 hours, the already primed surfaces need to be sanded again.
Painting the kitchen table
This is perhaps the most enjoyable stage of work in the restoration of a kitchen table with your own hands, without dirt and dust. Each stroke of the brush takes you one step closer to the desired result. The paint must be applied in two coats, and the dark color in three. The last, finishing layer must be given 3-4 days for complete drying.
Protective coating
The final stage of work is the uniform application of protective varnish in 2-3 thin layers. After each layer has dried (about 4 hours) and before applying the next one, lightly sand the surface with fine sandpaper. Instead of varnish, you can use wax as a protective coating - it will make the tabletop matte or it can be rubbed until it shines. The first layer of wax is rubbed into the wood with a soft cotton cloth, and after drying, the second layer is applied with light circular movements. This can be repeated several more times within one day. This completes the repair of the kitchen table. Leave the product for one week and only after this time will it be ready for full use.
Countertop restoration with decorative tiles
Next, we will look at how to restore a kitchen table with our own hands using ceramic tiles or mosaics. Decorative tiles are one of the most popular materials used for cladding the surfaces of kitchen units. The choice of many people is obvious - in addition to the availability of a variety of textures and colors, tiles are distinguished by their reliability and durability. In addition, it is very easy to maintain, easy to clean and resistant to high temperatures.
In order to restore a kitchen table with ceramic tiles, you need to choose a tile or mosaic that suits the style of your kitchen, purchase special tile adhesive, grout and edge profile.
Surface preparation is carried out according to the same principle as for painting. After completing the preparatory work, glue is applied to the surface of the countertop using a notched trowel, which will allow the tiles to be firmly and securely fixed.
Tiled elements must be laid out in a pre-planned composition. The distance between the tiles is adjusted using special plastic crosses. When all the tiles are laid out and firmly pressed to the table surface, and the glue is completely dry, it is necessary to prepare the grout mixture and fill the joints between the tiles with it.
In order for the look of the restored table to be complete, the sides of the table top should also be decorated. For this purpose, special edge profiles are used that match the tone or style of the selected tile. Thus, having completed this repair, easily accessible for every home craftsman, your furniture will come to life again and give the kitchen design originality and freshness.
Decoupage kitchen countertops
Consider another popular way to update furniture - decoupage. This modern decor technique allows you to quickly and, most importantly, on a budget transform the table, making it a bright accent in your kitchen.
To restore a table using decoupage, in addition to the materials and tools necessary for cleaning the table from old surfaces, grinding and priming it, you will need decoupage napkins, a container with water, glue, plastic wrap, matte or semi-matt varnish.
Repairing a countertop using decoupage begins after it has been primed and sanded, or after it has been coated with paint or varnish. First, using a pencil, you need to markup, marking the location of the images. Next, in a container with water, it is necessary to place the cut paper image face down. After 30 seconds, the image is removed and placed on a plastic wrap, according to the same principle - face down, and all excess paper surfaces are removed.
The prepared picture is smeared with glue and attached to the prepared worktop. In this case, using a file, you need to carefully smooth out the picture and only then take it off. If desired, the surface of the pictures can be decorated with paints, and at the end the resulting image should be covered with acrylic varnish and allowed to dry thoroughly. This completes the repair of the kitchen surface. After three days, your new exclusive table will be ready for full use.
So, what is such a procedure as restoring an old table, what are the methods and materials for restoring its appearance? In general, how to return this piece of furniture to its youth?
General principles
When the table is restored, the object not only returns to its appearance. Its functions must be restored as well. Therefore, before proceeding directly to the renewal process, you need to carefully check the integrity of the item: in what condition are its legs, are they broken, are the fittings in place. And think about whether it is worth doing it at all. Indeed, it is unlikely that an updated rickety table, sparkling with new paint, will bring satisfaction to the owner. So first assess the scope of work, think about their feasibility, and then, if you come to a positive decision, fix all the breakdowns first. And then start updating the look.
Restoring the desk
As a rule, there is not much hassle with this piece of furniture. Usually, due to its bulkiness, it always stands in one place, throughout the apartment, to hang curtains or remove cobwebs, no one drags it. And the countertop suffers from time most of all. How to revive it? It's very simple. The restoration of a desk is a simple procedure that does not require any special material or physical costs.
Work description
First, find the right wallpaper that best suits your interior. Then paint the entire table to match their color. After it dries, wallpaper the countertop using PVA glue, and then cover it with glass. The latter can be ordered from the store. Instead of wallpaper, you can take a poster, or make a custom-made photo according to the size of the countertop, or even buy a beautiful dense fabric of the desired color and also paste over the surface with it. In general, you need to fantasize. Table restoration is a creative business, so get creative, come up with your own options.
What can you do with an old coffee table?
If this piece of furniture, albeit inexpensive, but so beloved and convenient, has already, to put it mildly, not very attractive, arm yourself with paints and a brush to update it. Restoring a table by painting it is not difficult work. However, the method that we want to propose will take time. First paint the table white. This will be the foundation. Then, when it's dry, paint the countertop in stripes of different colors and different widths. To make them lie flat, paint the surface gradually, and use tape to determine the boundaries of each.
Decoupage
Table restoration is perfect for those items that do not come into contact with water very often. That is, with its help, you can update the written and magazine described above, as well as For this, first, the selected item must be tidied up, painted and allowed to dry. And then glue images from a napkin or special decoupage paper to the surface using PVA glue. When the pictures are dry, the entire surface should be covered with acrylic varnish. And preferably more than once.
How to upgrade a kitchen table
The easiest option is to paste over the surface of the countertop and paint the legs and side surfaces. Or, for example, paint them in different colors. And pull up a dense beautiful oilcloth and fix it at the bottom with a stapler. If the countertop is already falling apart completely, there are two options. Replace it with glass, and build a backlight under it. Or do not throw it away, but cover with ceramic tiles, such as mosaics. And then carefully seal up all the seams with grout. In general, the restoration of the kitchen table has such a mass of available options that it will definitely not be difficult to carry out it competently.
Wooden tables
But what if a table made of solid wood has acquired an unsightly appearance over time? It is also possible to put it in order, but, of course, the process will be quite long. If your table was at one time only varnished and has no defects, then the procedure will be quite simple. It is enough just to carefully grind it (it is advisable to use a special machine for this), and then varnish it several times. Moreover, the varnish must be taken several shades darker than the original coating. Well, if the table literally asks for a landfill, but it's still a pity to throw it away, then you need to prepare for a lengthy renewal procedure.
Restoration of a wooden table
First, we carry out the preparation, as mentioned above. Let's think about replacing the loose legs with new ones. If a positive decision is made, go and buy. If not, we process the old ones in the same way as all the other parts of the table. We take a sander and carefully remove all the old coating. First, we work with coarse grain discs. When all paint or varnish has been removed, take a fine-grained disc and smooth the surface. Now we close up all defects, even the smallest ones. We use it for this When the patches are dry, we also clean them.
The whole procedure must be done very carefully, as even the smallest chips and scratches will be noticeable. Then we degrease all surfaces using a special compound that can be bought at any hardware store.
Remember: each stage takes time, before applying any next composition, wait for the previous one to dry. After degreasing, apply a primer. And not the first one that came across, but acrylic. When the soil is dry, we grind the surface again, but by hand, gently and accurately. And you can start painting. You can choose varnish or paint as a topcoat. Today there is a very large selection of all kinds of compositions, the main thing is that they are of high quality. So buy varnish or paint only from a trusted manufacturer, you should not save on the coating. Also, be careful when choosing a brush. Poor quality will shed and leave behind hairs, which will definitely not add to the beauty of the surface.
It is advisable to apply three layers - with a break, of course - varnish or paint. When all the elements of the table are completely dry, proceed with the application of a protective coating. As a rule, wax is used for these purposes. It is applied to a cloth and carefully rubbed into the surface. In order for the renewed table to serve you for a long time, wait until the final solidification of the wax. This will take a week.
Conclusion
As you can see, table restoration is a creative process and sometimes, unfortunately, quite lengthy, but nevertheless satisfying. However, and not only. After all, if everything is done correctly, then you can save yourself from unnecessary spending on the purchase of a new piece of furniture.
People love the fact that beautiful things surround them at home. Over time, the interior of the premises loses its gloss and goes out of fashion. Sometimes it is so difficult to get rid of a favorite item, because it has witnessed many pleasant events of the past, and not everyone can afford to buy new furniture. But you can solve the problem that has arisen by restoring the old thing. In this case, it will not have to be thrown away, it will look fresh and creative in the room, and the money for the renovation will go much less than for the purchase of modern furniture.
Recently, people prefer to restore old things with their own hands. This process is creative, fun and not complicated at all. The hostesses are especially fond of experimenting with such interior items as coffee tables, because they can then be gladly shown to guests. There are many ways to restore these things. How to update a coffee table at home to turn it into a small masterpiece?
Furniture restoration
People embellish old interior items in different ways, they renew them by varnishing, painting, processing with decoupage technique, covering with leather, fabric, oilcloth, and tiling.
Thanks to some techniques (craquelure, brushing), the tables are artificially aged, and things whose age does not exceed 10-15 years look like products of half a century or a century ago, giving the premises the spirit of antiquity. Many restoration lovers like to combine several techniques together, for example, they combine decoupage technique with craquelure. By applying these methods for the restoration of the coffee table, the owners will receive an interesting thing that will fit into the design of the room in a new way.
Back to the table of contents
Updating the table using decoupage technique
Since we are talking about the restoration of the coffee table, the most original and beautiful solution will not be to cover it with fabric and not just varnish it, but to update it using the fashionable decoupage technique. Its essence lies in the fact that applications or whole pictures from special napkins, wallpaper, geographical maps and music sheets are glued to the surface of the countertop, and then the products are varnished. To complete this work, you need to take care of the materials and tools necessary for it in advance. In addition to the aforementioned paper and napkins, these will be:
- screwdriver;
- sandpaper of 2 types (fine and coarse);
- primer;
- white acrylic paint;
- watercolor;
- acrylic contour;
- PVA glue;
- a can of furniture varnish;
- regular or curly scissors;
- flat brush (flutes);
- watercolor brush.
It will be better to disassemble the coffee table before updating by separating the table top from the frame and unscrewing the legs. This must be done in order to remove old varnish or paint, even from the most inaccessible places. Next, all parts of the table should be well processed, first with coarse-grained, and then with fine-grained sandpaper, the front side of the tabletop is especially carefully sanded. After that, the piece of furniture is bolted again. The next step is to prime the coffee table with a flute and paint it with white acrylic paint. It is advisable to apply at least 2 layers of acrylic on all surfaces of the thing, after drying each layer well for 5 hours. Otherwise, the paint under the varnish may stain or crack.
Surface preparation for decoupage: 1. Selection of the pattern; 2. Leveling the surface; 3. Application of the primer.
Then the spray lacquer easily falls on the surface of the countertop. After it dries, they begin the most creative process - cutting out decorating elements from napkins. It is better to do this with special scissors. To cut a wallpaper pattern or trim the edges of a geographic map, regular scissors will do.
When the applications are ready, they should be moistened with water. Wet napkin elements, in accordance with the plan, are laid out on the surface of the countertop, greased with PVA glue, and smoothed with a flat brush. But it is better to soak a dense card or wallpaper pattern in water for a few minutes. In this case, the surface of the table in the places for applications is lubricated with a mixture of PVA glue and water (ratio 1: 1). When the glue is dry, you can paint on some parts of the appliqué with watercolors. To make the images look three-dimensional, use an acrylic outline. Finally, the entire surface of the table is covered alternately with two layers of acrylic varnish.
Back to the table of contents
Craquelure worktop
Along with decoupage, you can age it with a special craquelure varnish, which creates cracks on the countertop and thus makes it "older". For work you will need:
Decorating process using craquelure technique: 1. Applying the color of cracks; 2. Application of craquelure varnish; 3. Application of the main color.
- acrylic paint in two colors (brown and white);
- furniture varnish;
- brushes.
All stages: sanding and priming of the surface, preparation of applications, their gluing and final varnishing will be carried out as in the above method. But in the middle of the workflow, there will be changes. The primed countertop will require several coats of dark paint and allow to dry. The surface will need to be coated with craquelure varnish. Do not wait until it dries completely, the varnish should remain sticky and only slightly harden. Then the table top is painted with white acrylic and dries. Within an hour, the product will begin to crack, and dark paint will show through. When the acrylic is completely dry, you will need to glue applications on the surface of the table and finally cover it with furniture varnish.
Often this old piece of furniture that has lost its presentation in the kitchen, which clearly falls out of the general style of the room, is a reason for controversy: it seems like it’s time to replace it so as not to spoil the interior - however, it’s a pity to throw it away, and the funds do not allow furniture to be “scattered”. even if it has served a considerable period of time.
Dilemma: restoration or decoration?
An old, but still sturdy dining table, especially if it is made of metal or solid wood, could have served for a very long time if it had not been for a work surface that has suffered from time and long use, or a design that no longer suits the style of a new kitchen.
All work on the return to life of this important part of the kitchen interior, with the restoration of normal functions or their change, can be divided into three categories:
- Restoration;
- Restoration with a change in design;
- Decorating.
On the options for how to update an old kitchen table with your own hands in the best way, you should dwell in more detail.
Restoration. This type of work is carried out if the furniture is ideally suited to the interior of the kitchen, however, it has lost its presentable appearance during long-term use, or the strength of the structure has suffered from time.
Before proceeding with the restoration, you need to stock up on the following materials and tools:
- Grinder, sandpaper of various grain sizes;
- Glue for wood or metal (depending on the material of the underframe);
- Putty for the underframe material, primer;
- Special paint of the desired color (for wood or metal), intended for interior use, as well as a small roller and brushes.
If the frame is metal, then the restoration process consists of the following stages:
- Dismantling the countertop;
- Cleaning the surface from the old coating;
- Puttying the surface for better staining - a special composition of the putty for metal allows you to make the surface smoother, protecting it from oxidation in the future;
- Grinding - necessary in order to remove various roughness to prepare the surface for painting;
- Priming - can be done using special compounds, or you can use a base paint with the addition of a solvent;
- The frame paintwork must consist of at least two layers. Moreover, each new layer of paint is applied to the already dried previous layer.
- A worktop for a restored metal frame can be made as follows:
When restoring wooden furniture, the sequence of stages does not change. However, before proceeding with the restoration of such a surface, it is necessary to strengthen the entire structure of the product:
- Carefully inspect all connection nodes, if necessary, fix them with glue, furniture corners or confirmations (furniture screed). If there are moving joints, check their functionality. If the mechanism is damaged: repair it, replace it, and if such a function is not important, make the unit static.
- Remove the remaining decorative elements and accessories, which may be damaged during further work;
- The tabletop, if it is not planned to replace it, cannot be dismantled.
- Next, you should get rid of the old coating - carefully sand all surfaces, including the internal elements of the frame;
- If there are potholes and chips on the surfaces to be restored, or cracked seams at the joints, you need to putty them with a special acrylic putty. It is better to level the tabletop with a special compound: mix small sawdust into PVA glue or wood glue and fill the existing grooves with this mixture. After the glue has dried, sand all structural elements again;
- If the surface was leveled so that the defects became invisible, and the tree retained its original structure, you can cover the table with tinting (transparent acrylic paints that give any shade to the wood, and do not hide the pattern of its fibers);
- After applying the first layer of paint, all structural elements should be carefully sanded - to remove the upturned wood fibers;
- The next 2 layers of paint are applied at intervals of several hours (so that each has time to dry);
- Finishing - varnishing: for kitchen furniture it is necessary to choose a special varnish that gives a coating that is resistant to mechanical and temperature influences.
- After the varnish is completely dry, the work surface of the table must be covered with several layers of wax - this will give it additional water-repellent properties.
- Remove all dirt (especially grease stains) with detergents. Dry thoroughly.
- Using a grinder, clean the surface, getting rid of the old varnish coating - the paint does not adhere well to it.
- Apply a primer (preferably one that protects the wood from moisture penetration) - using a roller, brush or aerosol. Be sure to let it dry well.
- Paint in the desired color 2-3 times, applying layers as evenly as possible, giving each of them time to dry. After applying the last layer, leave the product to dry for at least 24 hours.
- Apply wax paste and, using a cotton napkin, rub thoroughly into the worktop in a circular motion - repeat the procedure 2-3 times to get a matte non-sticky surface.
Your old table in a new look is ready: you need to let it stand for about a day without work, and it will serve you for more than one year!
Restoration with redesign
Such a design is another way to make a new, more spacious one from an old kitchen table.
You can go this way if you bought a new table in the kitchen, and the old one is still good enough to throw it away.
In addition, you can simply restore it, adding a "zest" to the structure. How to update an old kitchen table with your own hands in this way is shown in the photo - the process itself requires a somewhat more detailed description.
To make changes to the design, we need:
Chipboard sheet, 2 legs for legs, 2 chipboard slats - all of this size to make a table that fits under the old kitchen table in size. It is better to screw the wheels to the legs of the small table - this will make it more convenient to use it, and the floor covering will be preserved better.
For the screed, 6 confirmations and 2 furniture corners will be needed, and to combine the two structures - 2 aluminum corners equal to the width of the larger table.
In addition, we need: putty for wood, enamel in 2 matching shades, varnish and wax paste for finishing surfaces.
Rest assured that the “out-of-the-box” dining space will gain immense popularity among the younger family members - here children will be more comfortable because of the smaller difference between the height of the chair and the table top.
Decorating - for every taste, style and ... wallet
This method of "reanimating" the kitchen table is the most exciting, having a variety of methods with the use of the most unexpected materials. When thinking about how to update an old kitchen table with your own hands with the help of decoration, you must remember about the strength of the coating being performed - the surface must be resistant to temperature changes, mechanical stress, and must also be easy to clean.
For decoration, you can use the decoupage method, composing various collages on the countertop (especially if you use glass as a protective coating on the countertop), painting and stencil prints.
We offer you another, in our opinion, very interesting option - decoration with smalt. This solution will be even more original if the work surface of your masterpiece is made of the same mosaic tiles as the kitchen backsplash.
We will need:
- Remains of smalt left over from the apron, or several matrices (according to the size of the table). As a rule, matrices with tiles have dimensions of 300x300 mm, and the size of smalt squares can vary from 10x10 mm to 20x20 mm;
- Tile adhesive, grout and old waffle towel
- Masking tape, spatula and scissors;
- Paint of one of the shades of smalt (for wood); end tape (better than ABS);
- Varnish and wax paste for finishing worktops;
1st step. Restoration and painting of surfaces - the actions are similar for all similar products and are given above.
2nd step. We glue the ends of the countertop with masking tape, and on the countertop itself, apply a thick layer of tile glue with a spatula, level it, and carefully lay the matrices with mosaics that are pre-adjusted in size and color. Press gently, trying not to dislodge the pieces. Care must be taken to ensure that the ends of the table top (taking into account the thickness of the smalt) remain even. Leave the tiles to dry.
3rd step. We make grouting. To do this, apply the grout diluted to the desired consistency on the mosaic, level it with a spatula, removing excess grout with it. Let it dry a little, and then remove the grout from the smalt with a damp sponge.
