If you decide to install aluminum windows, then in the process of carrying out the work the same technology should be used as when manipulating other types of windows. However, there are still some peculiarities. Compliance with the technology will ensure durable and reliable operation of aluminum systems. They are chosen for their durability, because the service life of such systems exceeds 50 years. Repair of aluminum windows during this time is not required.
They are lightweight and highly reliable. These performance characteristics are due to design features. In the production of frames, a complex of window profiles is used, which includes a shtulpovy profile, a glazing bead, a profile for sashes, as well as an impost profile. This set allows you to get windows, not only different in configuration, but also with a different opening method. When choosing aluminum windows, you can opt for a tilt, swing or tilt-and-turn system. The latter is the most common for ease of use. Fixed windows that do not have opening sashes can also be installed. When glazing loggias, multi-sash windows are used, in which it is possible to combine frame-type sashes. The production of aluminum windows provides for this. If you have to work with limited space, then it is best to prefer sliding systems. Aluminum window profiles are produced in the form of a warm profile and a cold one. The first has thermal insulating inserts, while the second is devoid of them.
Preparation before installing the aluminum profile
If you decide to install aluminum windows, you first need to make a preparatory stage. Before installing the window, dismantle the old structure, and then prepare the window opening.
Preparation of materials and tools
When removing the old frame, you may need to use an electric jigsaw, chisel, and hammer. But during installation, you will need a hammer drill, metal drills, a screwdriver, a drill, a construction knife, a building level, wooden blades, as well as dowel-nails.
Dismantling the old frame
Before installing aluminum windows, you will most likely have to dismantle the old wooden structure, while you can use a saw or an electric jigsaw, using one of these tools you will have to cut the frame in several places, which will make it easier to remove the box from the window opening. In the place where the cut is carried out, you need to pry the frame with a crowbar, and then carefully remove it. When carrying out this work, it is preferable to start from the bottom of the window.
After the old window is removed, it is necessary to remove the window sill, for this it is most convenient to use a hammer and chisel. After dismantling the old structure, it is necessary to prepare the window opening; carrying out this work involves the removal of fasteners, as well as concrete fragments that remained from the old frame. If the opening has been damaged or has irregularities, then it must be leveled using a traditional mortar. In this case, the installation of the aluminum profile is postponed for 2 days until the solution completely hardens. If you decide to install new windows, an aluminum profile is perfect for this. Before starting, it is advisable to moisten the opening with water and cover with a primer. In order to exclude damage to the window opening during dismantling, the force must be applied in the area of the window, and not in the perpendicular direction. Under such an effect, fasteners in the form of nails will be quite easily removed from the concrete.
Installation of the aluminum frame
Manufacturing of aluminum windows is carried out according to the latest technologies, which ensures their high reliability and durability. However, in order for the structure to serve for a long time, it must be properly installed. The window structure is realized in a partially disassembled state, so it is important to know how to carry out the work. The process begins with the installation of the frame, if the window arrived assembled, then you need to free the frame from the sashes and glass unit. This element must be installed in the opening, and then aligned with wedges. The position of the structures must be checked using a building level. Holes should be made around the perimeter of the frame and wall to accommodate the fasteners. should be strengthened using dowel nails. Using one self-tapping screw through the holes in the plate, it is necessary to fix the structure to the wall, while the second self-tapping screw is used to attach it to the frame, which occurs through the second hole.
Assembly seam
The assembly seam must be formed in two stages, the first involves sawing the frame around the entire perimeter, then it is important to wait for an interval, the period of which is 2 hours, only after that you can remove the wooden wedges used to level the frame. The holes formed must be treated with construction foam. After the joint hardens, excess construction foam must be removed.
If you decide to install windows, an aluminum profile is a great solution. The most suitable distance from the frame to the side walls of the openings is 5 millimeters. If this distance is increased, which may be necessary to level the frame, then additional plates should be used.
and low tide
Along the lower perimeter of the frame, you need to fix a vapor-permeable film that is able to pass air and retain moisture. To the bottom of the aluminum frame from the outside, you need to fix the ebb using self-tapping screws. The gaps that are obtained between the ebb and the frame must be filled with construction foam. The excess must be cut off, and the joint area must be covered with a layer of sealant. The window sill is wound under the frame, and then inserted into a special groove. In the next step, you can align the location of the sill horizontally. It is installed at the interface between the window sill and the frame must be treated with a sealant. If you install a window sill with a slight slope, then this will protect against moisture penetration.
Installation of a double-glazed window and adjusting fittings
When installing aluminum windows, at the last stage it is necessary to install double-glazed windows, as well as sashes. At the same stage, window fittings are adjusted. The inserts must be placed along the perimeter of the frame, and then the double-glazed windows must be installed. The latter is fixed with glazing beads. It is important to hammer them in with a rubber mallet. It is quite difficult to mount a double-glazed window, therefore it is recommended to entrust this process to professionals. Before installing the sashes, it is necessary to check the presence of a set of fittings, after which the handle on the sash is set to a horizontal position. The sash is put on the bottom hinge.
A corner loop must be inserted into the upper loop. After that, everything is fixed with a pin and pushed until the latch is triggered. In order not to need premature repair of aluminum windows, it is important to correctly adjust the fittings, for this, the fastening screws are tightened or loosened.
Features of installing sliding windows
On the top and bottom of the frame, it will be necessary to drill holes at a distance of 30 cm. The rails are fixed with screws to the frame. The glass unit is installed in the sash. Installation of aluminum windows of this design requires the installation of two rollers in the lower part of the sash, they must be located on both sides. The step from the rollers to the edge of the sash should be 5 cm.
Installation of aluminum windows involves ensuring the distance from the outer edge of the frame to the rail within 5 centimeters, otherwise everything will freeze during the cold season.
Conclusion
Before proceeding with the installation of the window, it is necessary to check it for defects such as scratches, distortions and cracks. It is not permissible to use steel plates to adjust such windows. It is necessary to align the location of the window using wooden and plastic wedges. The manufacture of aluminum windows involves the use of the latest technologies, however, during transportation, the structure may be damaged, this must be identified at the initial stage.
Balcony glazing is one of the most important measures in the process of apartment renovation. Firstly, it is necessary to insulate housing, because a significant part of the heat comes out through the balcony. Secondly, after installing windows there, you get additional space that can be used for certain residential or business needs. But, before starting work, you need to decide from what material the glazing should be carried out. And one of the most popular options is aluminum windows to the balcony.
The installation of aluminum windows on the balcony is gaining more and more popularity today. And for those who are just thinking about this, we will give the pros and cons of such glazing. Let's start with what are the advantages of aluminum windows to the balcony.
- Availability... Often people give their preference to aluminum windows just because of the low cost. On average, the price for them is 1.5-2 times cheaper than for a similar glazing with PVC windows.
- Light weight... Aluminum itself is a very light metal. Accordingly, all structures made of it, including window frames and sashes for the balcony, are not heavy. And due to this property, window structures exert little pressure on the parapet. Therefore, aluminum windows are suitable for installation on balconies in emergency buildings. In addition, it is much easier to carry and install.
- High sound insulation... Due to the sealed frame and tight closing of the sashes, aluminum glazing will protect your home from extraneous noise from the street.
- Attractive appearance and the possibility of painting aluminum windows in various colors.
- Easy to clean- the outer surface of the frames and sashes of aluminum glazing is covered with a water-repellent film. Due to this, the product is less prone to pollution from dust and atmospheric precipitation. Consequently, it is much easier to care for such frames than for wooden structures - you just need to wipe it inside and out with a wet rag every few weeks.
- High strength and durability- aluminum windows, despite their relative lightness and cheapness, are very strong structures. Their service life is measured in three to four decades.
Important! For owners of small apartments, it makes sense to consider the option of glazing the balcony with aluminum windows with a perimeter that exceeds that of the parapet. As a result, the useful area of the balcony increases and it can be used to arrange indoor plants in the warm season or as an additional refrigerator in winter.
Also, when thinking about purchasing aluminum windows for a balcony, you should be aware of their shortcomings. The main disadvantage of such structures is the insufficient degree of thermal insulation. A balcony with aluminum windows, as a rule, will be "cold" - in winter the temperature in it will exceed that on the street by no more than 5-6 ° С.
The design of a balcony or loggia in the Provence style is becoming fashionable among our compatriots. They are attracted by discreet grace, French simplicity, natural finishing materials and the presence of vintage elements. For a more detailed acquaintance with the question, we recommend reading.
Another disadvantage is that aluminum frames and sashes are installed only on perfectly flat and prepared surfaces. Therefore, before the installation process begins, the parapet will have to either be leveled with a cement mixture, or a wooden board should be placed under the structure and all the glazing elements will be installed on it.
Video - Installing an aluminum balcony frame
Aluminum windows to the balcony - step-by-step installation instructions
Now that you know about all the features, advantages and disadvantages of aluminum windows to the balcony, let's look at how the installation takes place.
List of tools
But before starting work, any master needs to stock up on a set of tools. You can familiarize yourself with the list of what you need to install aluminum windows on a balcony from the table below.
Table. Installation of aluminum windows on a balcony is a necessary tool.
| Tool name | What is it used for |
|---|---|
| Dismantling old glazing elements |
| Driving fasteners into dowels, fitting, dismantling old sashes and frames |
| Dismantling the window sill and ebb |
| Splitting the old frame into several parts for easy dismantling |
| Measurements and control of evenness vertically and horizontally |
| Screwing in self-tapping screws and other fasteners used when installing aluminum windows on a balcony |
| Used to loosen or, conversely, tighten the fastener |
| Making holes in the parapet to secure some parts of the aluminum glazing |
| Working with some mechanisms of aluminum windows |
| Processing the joints of various glazing elements and sealing gaps that could remain after the installation of aluminum windows on the balcony |
Important! It is advisable that the screwdriver has two batteries - while one is working, the other is being charged. Then they change places. Thus, the continuity of the work process is achieved.
Dismantling old glazing - step by step instructions
Before proceeding with the installation of new aluminum windows on the balcony, it is necessary to get rid of the old glazing.
Step 1. The dismantling of the old glazing begins not with breaking the window frames, but with preliminary measurements. Using a tape measure, the length, height and depth of the opening on the balcony are determined. Without these data, it is impossible to choose aluminum glazing of suitable dimensions.
Step 3. The building level is drawn along the upper part of the balcony opening - it is necessary to find out how flat the concrete slab is, whether there are distortions there. Such defects are characteristic of old houses that are in disrepair, and this must be taken into account when installing aluminum windows on a balcony.
Important! In the process of performing all measurements, it makes sense to record the results of the work. Craftsmen working in companies for glazing windows and balconies use standard forms for these purposes, as in the image below. You can adapt a regular piece of paper for your notes.
Step 4. Only after all measurements have been completed, you can start dismantling the old glazing. Work begins by removing the leaves from the hinges. If they (sash) are in a satisfactory condition, then the process is done carefully, using a screwdriver. But more often the sashes of the old balcony glazing are removed using scrap. Much faster, more efficient and safer, this work is done in pairs.
Step 5. The window sill and ebb tide are pushed on and removed with a crowbar. If they hold too tightly and tightly and do not just dismantle them, then the craftsmen resort to using a hammer and chisel - the latter is driven in between the parapet and the window sill (or ebb) in several places. Then, a scrap is inserted into the cracks formed, the glazing piece is pushed on and removed from the fasteners.
Step 6. Then, with a conventional saw, cuts are made at several points on each side of the window frame. This operation greatly facilitates the subsequent process of dismantling the structure, making it possible to remove it in small parts.
Step 7. The sawn parts of the balcony glazing frame are removed from their place and removed to the rest of the construction waste. If necessary, resort to the use of scrap.
Step 8. After removing all parts of the old glazing, the opening on the balcony is protected from concrete fragments, individual small parts of the frame or from fasteners. Then small irregularities are smoothed out. All construction waste resulting from the dismantling of the old glazing is disposed of.
Important! Before installing aluminum windows, serious defects and unevenness of the window opening are eliminated with cement mortar.
Installation of aluminum windows on the balcony - step by step instructions
Now that the balcony opening is free of old and worn-out glazing, new aluminum windows are being installed. As in the previous section, information about this case is presented in the form of step-by-step instructions.
Step 1. In this example, the alignment of the edge of the parapet is done by installing wooden planks. They are fixed on long self-tapping screws screwed into concrete. In this case, the boards are aligned horizontally using the building level.
Step 2. The delivered aluminum window parts are unpacked, counted and checked for defects. Then, frames are assembled from individual elements - while rubber gaskets are inserted between them, which are necessary to seal the connection. The parts are connected to each other using self-tapping screws.
Step 3. All other frames are assembled according to the same principles that were outlined in the previous operation. As for the sashes, they are usually supplied ready-made - assembled and glazed.
Step 4. Anchor plates are installed on the upper part of the frame, with the help of which the structure will be connected to the ceiling on the balcony. The places for installation are not chosen by chance - from the edge of the frame to the anchor plate should be no more than 20 cm, and the interval between the elements should not be more than 40 cm.
Step 5. A window sill is installed on top of the board laid on the parapet. For starters, it is horizontally aligned.
Step 6. Then the window sill is fixed on the board using self-tapping screws screwed into the part.
Step 7. The laying and fixing of the second window sill is carried out according to the same principle. In this case, both parts should fit tightly with each other, and their edges should lie on the same line.
Step 8. On the outer side of the parapet, a metal drip is laid on top of the newly mounted window sill. It is fixed with small screws.
Step 9. Another ebb is laid next to it, while it does not just fit with the previous one, but overlaps with it, as shown in the image below.
Step 10. The installation of the aluminum window frame begins from one of the edges of the balcony. One of its component parts is inserted into the opening and fixed there from bottom to top. Its vertical position is controlled by the building level.
Step 11. Part of the aluminum frame is attached to the parapet with self-tapping screws. They are inserted into the corresponding holes in the bottom part and screwed in with a screwdriver.
Step 12. Another part of the frame is installed next to it. It then joins the glazing element installed in the previous operation. Fixation is carried out using self-tapping screws screwed into the side parts of both parts of the aluminum frame.
Step 13. Holes are drilled in the concrete slab on the balcony ceiling for fastening the anchor plates. Then dowels are inserted there and self-tapping screws are hammered. The latter fix these plates, and at the same time the parts of the aluminum frame from the upper side of the opening.
Step 14. Between the ceiling of the balcony and the upper edge of the aluminum frame, a visor is inserted from the outside and installed, which is necessary to protect the glass from pollution during rains and other precipitation. The visor is attached with self-tapping screws screwed through the holes in the anchor plates.
Step 15. The joints "visor-frame" and "frame-ebb" are treated with silicone sealant - through them not a single drop should penetrate into the balcony, even during the strongest downpour.
Step 16. The doors are installed on special fasteners and guides of the aluminum frame - both rigidly fixed and movable. At the same time, it is checked whether the latter can walk freely and how well the windows on the balcony open and close.
Upon completion of all the above operations, the installation of aluminum windows on the balcony can be considered successfully completed. Now you can enjoy all the advantages of modern and high-quality glazing.
For many years old windows have been replaced with new and modern structures. Now more and more people prefer aluminum systems. Compared to earlier versions, they are distinguished by high quality characteristics, and have a lot of advantages. Installation of a profile is possible both in new buildings and to replace old wooden or other windows. A lot of color options are offered, such as opening.
Manufacturing aluminum to new standards has made it popular and more affordable. These systems combine a high degree of strength with reliability. The material is environmentally friendly, the positive qualities of such structures have made them attractive for apartments, houses, office, public and other types of buildings.
A wide range of colors, installation options and parameters of aluminum windows allow you to achieve an attractive appearance and high quality characteristics, but for this it is important to take care of the correct installation, taking into account all the requirements and nuances.
How to install aluminum windows step by step
When installing an aluminum window,preparatory work. This process includes dismantling a broken or needing replacement, and then everything is prepared for the start of installation. Removal requires tools and effort.
Removing
Most often, old wooden window blocks have to be dismantled, they are sawn into separate sections, pry off with a crowbar and removed. It is worth starting to the window area, at the bottom of the structure, and then to the top. When the window is removed, remove the sill using a hammer and chisel.
- remove fasteners;
- shards of concrete are removed;
- if necessary, the opening is leveled using a standard solution.
After leveling, you need to wait until it dries (it usually takes 2 days).
Frame installation
Aluminum windows are created using the latest technologies, due to which they are distinguished by their reliability, but this requires a competently performed installation. The systems are implemented in partial assembly, even if the delivery is assembled, you need to remove the sashes and double-glazed windows.
The frame is mounted first, the alignment is performed (wedges are used for this), focusing on the building level. Recesses for fasteners are made along the entire length of the wall opening and frame. Thanks to the use of dowel nails, the anchor plates are strengthened. The first self-tapping screw helps to mount the system relative to the wall (through the holes in the plate), and the second one helps to fix the frame.
The entire perimeter is processed with foam, and after 2 hours, the wedges are removed and the remaining areas are filled. The excess is removed after the foam has set. From the frame to the walls on the sides, they depart at a distance of 5 millimeters. If the alignment gap is larger, plates are required.
Steel protection of the opening
A vapor-permeable film is fixed in the frame area (bottom). The ebb is fixed to the lower area of the frame from the outside, and the gaps are hidden using assembly foam. After removing the excess, a sealant is applied. The window sill is brought under the frame area and inserted into a special groove. Fastening is carried out on mounting foam, the window sill is leveled, and a sealant is used in the interface with the frame.
Double-glazed windows and fittings
The final stage is the installation of double-glazed windows and sashes, and fittings are also adjusted. The inserts are placed around the perimeter, glass units are mounted, fixing with glazing beads. This requires a rubber mallet. Double-glazed windows are not easy to install, so it is better to use professional services. The fittings are checked, the handle is placed horizontally, and the sash is put on the lower hinge.
A corner loop is put into the loop from above and fixed with a pin. The push is carried out until it clicks into place. Competent adjustment of the fittings (tightening, loosening the screws of fasteners) will help to avoid the need for premature repairs.
Installation of sliding structures
- After removing the previous window, the frame is fixed (without double-glazed windows), the alignment is performed with wedges, and using a level.
- The frame and wall structure are drilled with recesses for fasteners.
- Plates are used if necessary.
- The frame is fixed to the wall.
- The placed frame is covered with foam starting at the bottom and working up the perimeter. Remove wedges, fill voids.
Sliding systems are a system of guides with sashes, they move thanks to rollers, and, at the request of the customer, can be combined with fixed sashes.
After the installation of the main structure, they proceed to the installation of the sashes, as well as the details of the fittings:
- from the bottom of the flaps, rollers are attached, usually 2-3 pieces;
- a brush type of seal is attached to the ends (it helps to reduce the penetration of noise into the room, as well as to avoid dust from the street);
- the upper part of the sash is first placed in the runners, and then lowered to the lower part of the structure;
- at the end, a window sill is mounted, if it is provided according to the plan.
When installing sliding systems, it is important to adjust the height of the rollers after the complete assembly of the system. For this, an adjusting screw is located at the bottom of the flaps.
Installation of the mosquito net is possible, for this there is a separate guide, and the net can also be moved using rollers.
Aluminum windows are a great option for cold glazing of balconies and loggias. They are lightweight, durable and aesthetic. At the same time, they do not require special maintenance and allow you to save space thanks to the sliding opening system.
Correct installation is also an important factor.
Why is the correct installation of aluminum windows important?
If installed incorrectly, they will not close well, the sash will slide (if the structure is sliding) or open, and it can jam, and the structure will become unusable very soon.
Perhaps, in order to fix this, you will have to call a repairman, or even do a reinstallation.
Installation instructions for aluminum windows in accordance with GOST
Installation steps in accordance with GOST:
1. Dismantling the old window and preparing a new window for installation
2. Installation of an aluminum window in the opening
3. The final stage of installation
| Two-stage formation of the assembly seam. The first stage is the usual foaming along the frame. The second stage - after 2 hours, the auxiliary wedges are removed, and the resulting voids are foamed | Cutting off foam residues (after at least 4 hours) | Ebb is mounted |
 |
 |
 |
| Installed double-glazed windows, platbands and window sills | ||
 |
 |
 |
Installation technology of aluminum sliding windows on the loggia and balcony
The installation of windows on the loggia and balcony has its own characteristics.
Installation technology looks like this:
How to choose a company for the installation of aluminum windows?
High-quality installation is always important, so you need to entrust it to professionals and this is definitely not the case where you need to save money. When choosing a company, you should pay attention to the time of the company's stay in the window market, the professionalism of the installers, the reviews of already established clients.
Our company fully complies with all of the above requirements and even more:
- term of stay on the window market - over 10 years;
- increased installation warranty - 5 years instead of the standard three;
- we employ experienced installers who have received professional training and a certificate from the Rehau Academy;
- Positive customer reviews speak for themselves, and we certainly listen to critical comments, because this is a chance to become better.
 |
 |
Work examples
What is included in the turnkey installation of aluminum profile windows?
* Garbage collection is an additional service that is paid separately.
Ideal windows should be practical, comfortable and easy to clean. Modern windows made of aluminum profiles have the listed advantages. In addition, they allow for unusual design solutions while maintaining high performance characteristics.
Main characteristics and scope of aluminum windows
Aluminum is an excellent structural material used in the manufacture of facade structures and windows. Products made of aluminum have the following characteristics:
- ease;
- corrosion resistance;
- environmental friendliness (no impurities of heavy metals);
- resistance to high temperature extremes.
Until recently, aluminum windows were used in public (shopping centers, offices) and industrial (workshops, warehouses) buildings. This was due to the low thermal insulation and high cost of aluminum window frames.
With the development of technologies, it was possible to achieve a decrease in the thermal conductivity of windows due to heat-insulating liners, which made it possible to install aluminum structures in residential buildings. Sliding systems made of aluminum in the glazing of balconies and loggias are especially popular.
The trend towards the use of metal windows in the field of room design has increased rapidly. The characteristics of aluminum profiles make it possible to carry out designs of any complexity and size, any method of opening and color.
Types of aluminum windows
There are many options for aluminum window structures, and in order to choose the best one, you need to decide on the purpose and place of installation.
Depending on the configuration and method of opening, the following types of window systems are distinguished:
- Pivoting windows - sashes open in one plane, usually inside the room. Traditional version, convenient for cleaning the outside of the window.
- Hinged windows - only the upper part of the window opens (the sash can be folded back). Suitable for storage rooms, stairwells and window openings located high enough.
- Tilt-and-turn windows are the most convenient and popular option, as they combine the functionality of two types of window systems.
- Multi-sash windows - used on large glazing areas (loggias, balconies). Provides for the presence of flaps of various types of opening.
- Blind windows - perform one function - room lighting. The ability to open windows is not. It is often used for glazing shop windows and facades.
- Sliding systems - sashes move along profiles. The operation of sliding windows saves space.
Depending on the type of profile used, aluminum windows are divided into two types:
- "Warm Windows" - the profile structure includes: two aluminum profiles with a layer of thermal insulation material (polyamide fiberglass). In addition to preserving heat, the "thermal bridge" increases the sound insulation of the room. Can be used in heated houses and apartments.
- "Cold windows" - are installed on balconies, warehouses or as an internal partition in heated buildings (offices, shops).
DIY installation of aluminum windows
Installation of aluminum windows is a laborious process, but doable. It is necessary to take a responsible approach to each stage of installation, and the window will last a long time without requiring repair work.
necessary tools
To complete the work, you need to prepare:
- chisel;
- hammer;
- jigsaw;
- screwdriver;
- building level;
- drill;
- puncher;
- polyurethane foam.
installation steps
Consider the procedure for installing aluminum profile windows in stages:
- Dismantling of old windows. The sashes and frames of the windows are removed, and the openings are cleaned. The old window sill and the external ebb must also be removed.
- The frame is placed in the window opening and its horizontal and vertical position is adjusted.
- Permanent fasteners are made through the anchor plates with dowel-nails.
- The void between the wall and the frame is filled with polyurethane foam (sealing from bottom to top, with a layer of about 40 mm).
- After two hours (the polyurethane foam should harden), the “foaming” must be repeated.
- Surplus foam is cut off.
- Fastening the ebb with screws.
- The foamed seam on the outside of the window is taped to ensure air circulation and additionally prevents water from entering.
- A double-glazed window and fittings for aluminum windows are installed.
- The window sill is being mounted.
- At the end of the work, the protective film is removed from the glass unit and the frame.
installation features of sliding systems
Sliding aluminum windows are installed in the same way as traditional ones. The difference lies only in the features of the assembly of the sliding system, which includes: double-glazed windows, rollers and guide rails.
A pair of rollers is attached to the sash from below (about 5 cm from the edge) with screws. A brush seal is attached to the horizontal and vertical parts of the sash. After installing the fittings, the sash is installed in the frame (inserted into the upper part and placed on rollers).
When installing aluminum windows, consider the following:
- before installation, it is necessary to check the windows for defects (scratches, cracks, distortions);
- the permissible gap between the window frame and the wall ranges from 15 to 55 mm;
- the cost of installing aluminum windows does not exceed the cost of installing windows from alternative materials (PVC, wood).
Advantages and disadvantages of aluminum windows
Aluminum profile windows have proven themselves well. A number of their advantages can be distinguished:
- fire safety;
- structural strength, which allows the design of large glass surfaces;
- long service life (about 80 years);
- aesthetics - retain their original state for a long time;
- anti-burglary properties - in addition to the fact that the profile itself is strong enough, special fittings are provided to the windows to resist burglary;
- ease of use and care;
- a wide range of products - in recent years, the number of manufacturing firms has increased.
Before buying, it is advisable to study the information about the manufacturer, its experience in the "window" market and determine suitable aluminum windows for the room (customer reviews can be read on forums and profile sites on the Internet).
Some disadvantages of metal windows should also be taken into account:
- high price - the cost of aluminum window structures is 2-3 times higher than a similar structure made of PVC;
- cold profile windows do not retain heat well.
Maintenance of aluminum profile windows
Aluminum windows do not require frequent and painstaking personal care.
It is enough to periodically wipe the profile from dust and dirt. To maintain the aluminum profile in its original form, use a silicone agent.
Scratches that appear and more visible imperfections can be hidden with the help of correctors and "aluminum resin".