Disease for PVC panels: types and tips. Obsek for PVC panels - Create aesthetic and durable Wooden cutture sketch with your own hands under the PVC panel

How to perform a lattice for PVC panels in the bathroom? Do you need a doom in the installation of plastic panels?

When planning repair in the bathroom, it is necessary to select such materials for finishing, which are characterized by high strength and resistance to operating conditions with high humidity.

One of these are PVC panels that are low cost, preserving the aesthetics of the appearance and simplicity of installation.

Problems of frameless installation of PVC panels

The installation of PVC panels is possible in two ways: frame and frameless.

At first glance, the frameless method is simple, but in the course of the installation work it turns out on the contrary.

This is primarily due to the need to ensure a smooth and durable surface of the walls.

Not in each bathroom after repair remains perfectly smooth walls. With significant irregularities, consumption of leveling mixtures will significantly increase.

In addition, a non-specialist will take quite a lot of time on the level of alignment and the use of laser level will be used. When approved even minimal errors, all inaccuracies will be visible on the decorative surface.

Another problem of direct contact PVC panels with a wall is the impossibility of laying a cable with ensuring unhindered access to it in case of non-standard or emergencies.

The option with the installation of the crate will reduce the cost of alignment of the walls, make it possible to hide all the necessary communications, as well as laying several insulating layers.

The presence of a rigid design will allow the installation of a partition between two bathrooms and ensure sufficient structural strength.

Choosing a material of the crate

Material for crates should be chosen on the basis of financial capabilities and preferred service life.

Wooden bars

For the crate, straight and smooth rails are suitable, without various defects with a cross section of 20x20 mm. When installing special difficulties it will not arise, as they are easily processed and can be fixed in any suitable way.

Wood must be dried in a natural way, so as not to led the design.

To make a mold or fungus on the surface, you need to apply a few protective layers: antiseptic and varnish or paint.

The term of operation of the structure when ensuring the optimal level of humidity will be up to 5 years.

Metallic profile

High strength design is ensured. All items have standard sizes and therefore there is no need for their fit.

Besides:

1. The profile has high protection against moisture and elevated temperatures, so the life of their operation can be up to 15 years, provided that when installing there was no damage to the outer layer.
2. Products have significantly smaller weight than when using wood, so do not create critical loads on the walls and ceilings when they are installed.

The cost of mounting metal profiles will be minimal, so this option is optimal in the price / quality ratio.

Plastic elements

Such material for the crate appeared relatively recently, so it is not widespread.

Plastic structures have maximum protection:

• from moisture;
• from mold;
• from pests.

They differ extremely simple installation due to clip connections. Performing additional treatments, fittings or applying protective layers is not required.

Plastic rails have plasticity, so they can take the shape of the wall.

However, this does not mean that the PVC panels installed will be mounted crookedly or with distortion, as the advantage of the clip is the impossibility of triggering with such installation errors.

Plastic rails can be installed on any types of ceilings and walls. The disadvantages include their high cost and relatively low strength.

Calculation of material and selection of the design of the crate

Before working, you need to calculate the required amount of material. Therefore, the first thing you need to accurately measure the length and width of surfaces under the finish.

Based on the measured data, a sketch or a drawing is created, from which the cost estimate will be determined and the optimal option is found in choosing the material of the crate.

The frequency of the guide should be within 30-40 cm and get out of the calculation of their uniform arrangement along the plane.

When planning, it is necessary to take into account that if it is required to make the PVC panels in the horizontal direction, the cutter must be laid vertically, and if in the vertical, then vice versa.

The number of fastening of the crate to the wall is 30-60 cm depending on the selected method of fixing and the strength of walls or ceilings.

Preparatory work

Preparatory work consists in assessing the evenness of the walls and the need for their partial alignment.

Usually in panel or brick houses, significant wall defects are often found, caused by non-compliance with the standards of construction or caused by a long service life of the object without carrying out overhaul.

Significant irregularities are most common near floor or ceiling corners of the bathroom.

It is possible to estimate the magnitude of irregularities using a laser level. If the magnitude of irregularities is more than 5 mm, it is recommended to perform alignment by grinding the existing layer or applying a new one.

If there is no laser level, you can use the folk method: to attach a flashlight to several points at the junction of the walls, mark the places of shading, and then align them.

It is not necessary to achieve ideal evenness - it is enough to get deviations of no more than 1-2 mm on a temporal meter of a wall or ceiling.

To save money, you can not align the walls.

In this case:

1. It will be necessary to determine the most convex point on the surface using a laser level and take it for the zero level.
2. Then make markers of the aligned plane on perpendicular walls with a marker.
3. During the installation, you will have to mount the guides to zero.
4. It is convenient to do this only when installing metal crates, as the elongated steel fasteners are provided for it, which are enough to bend by certain sizes.

The disadvantage of this method is the loss of the useful area of \u200b\u200bthe bathroom.

Mounting work

Installation of crates in the bathroom To install PVC panels start with marking. Take two guides and secure in parallel with the two opposite sides of the wall or ceiling.

Then in the places of fastening structural elements stretch the threads that will be a zero level. If the walls are smooth, this stage is the usual application of the lines with a marker to the plane in the location of the guides.

In the presence of high humidity in the bathroom and in order to prevent the appearance of dampness on the walls, it is recommended to put a vapor insulation layer before the markup.

How to carry out further work:

1. A metallic or wooden lamp is installed, starting from the installation of the guides to the left - to the right along the wall or from the opposite door of the corner.
2. The first bar is placed in a strictly horizontal or vertical position, depending on the type of structure, and then fixed from two sides to a dowel or self-tapping screw.
3. After that, screw additional fasteners with an interval of 30-40 cm.
4. Then they take the next guide and mounted in the same way. This method establishes all the elements of the crate.

Plastic cutture is mounted on a special tape or an adhesive base. At the same time, it is necessary to clear the surface of the wall or the ceiling from dirt and fat to improve the adhesion.

For the convenience of further work on the arrangement of the bathroom, it is recommended when mounting the crate follow the following rules:

1. When conducting overhaul, the bathroom should create a design and interior design project. This will allow in advance to provide places for fastening additional interior elements without damaging decorative PVC panels.
2. The panels are recommended to have strictly in a vertical or horizontal position so that when installing it does not have the need for their fit. When choosing one of the directions of laying panels, you should not forget that if you make horizontal placement visually, the room is broken and shortening, and if the vertical - the height of the ceilings increases.
3. To install the lighting system at the planning stage, you need to think about the method and scheme of laying hidden wiring. This will ensure reliable electrical protection and not occupy the useful area of \u200b\u200bthe walls for laying boxes with cables.

Installation of plastic metal or wooden elements of the bathroom crates for the completion of PVC panels is a fairly simple process with which even a non-specialist can cope with.

The main thing is to conduct competently calculations and perform preparatory work. Only with this approach during installation will not arise additional difficulties or problems.

PVC panels today at the peak of their popularity. Both in private homes, and in educational institutions, and in trading establishments - you can see the panel data everywhere. Modern technologies made them completely harmless and very light, which is an obvious advantage compared to other materials for finishing. Also their popularity is related to a number of advantages:

• acceptable price;
• aesthetic look;
• a variety of textures and colors;
• easy installation.

Types of crates

Plastic panels are durable, and this is another reason to stay on them. In addition, you can order the panels to which they will apply any photo or drawing. This will make your interior truly unique.

Set these problems such panels. This will help you a doomle for PVC panels.

From what room the panels are installed in, the type of crate for them will be dependent.

The lattice under the plastic panels is several varieties:

• wooden case made from bars;
• plastic, to which panels are fastened with the help of special clips;
• dome of the metal profile.

Before making a clamp under plastic panels, simple tools should be prepared:

• drill or perforator;
• screwdriver or screwdriver;
• hacksaw;
• level;
• roulette;
• a hammer;
• pencil.

Getting to work

Plastic lamp for PVC panels has a number of advantages:

• not deformed;
• resistant to all sorts of fungi (which is important for premises with high humidity);
• allows you to significantly speed up the installation.

Bashed such easier than simple. This is done with the help of a dowel. Mounted panels on it using fasteners - clips. The disadvantage is that the walls in the room must be perfectly smooth, otherwise the clip will not work.

Plastic strips for crate

How to mount plastic panels to a metal profile? The principle of operation is the same as with plasterboard:

• First, the starting P - shaped profile is installed.
• Next, they are fastened with metal guides with holes for fastening PVC panels.
• Plastic mounts are mounted on the guides.
• And the PVC panels are fixed directly to them.

The lack of such a type of crate is quite high cost.

Fresh panels on a metal profile

The wooden lamp under PVC panel is performed as follows:

• Bars are processed by an antiseptic.
• On the perimeter of the square that the rails are attached to the PVC panels.
• Guides are mounted for rakes (the distance between them is 35 - 45 cm).
• Plastic fittings are attached to the guide.
• Mounting panels directly.

The disadvantage of such a crate is that it is not suitable for premises with high humidity - such as baths, saunas.

When choosing bars, it is necessary to ensure that their humidity does not exceed 20%, otherwise they are subsequently deformed, which will lead to the fact that the panels will disperse.

Several secrets from professionals

Before making a crate, it is worth considering such moments:

• between the layouts of the crates should be a distance (from 30 to 50 cm);
• reiki claws are always attached strictly perpendicular to the panels;
• be sure to attach additional rails around the doors and windows.

Installation of crates under the panel - not a very difficult task, with which even a novice master will perfectly cope. The most important thing is to carefully examine the instructions, stocking the necessary tool and select the fastening profile for PVC panels.

And finally, the quality of the plating from the PVC panels is fully dependent on the installation of the crate. If it is incorrect, the type of panels will be unpredentible, and they will serve very little.

Wall Panel Installation Videos

Look at the video on the use of plastic planks for the crate under the wall PVC panels

The bathroom is a room with high humidity and frequent temperature drops therefore, not every material is suitable for its finishing. There is quite a large number of bathroom design options. One of the cheapest materials are PVC panel. The frame for PVC in the bathroom is quite simple, and the material itself is relatively inexpensive.

PVC is made from synthetic material formed by chemical mixing carbon, chlorine and hydrogen, as well as lead. However, the lead is present in high-quality panels in such small amounts that it does not stand out even with PVC burning, so this material is safe to use (if it is complied with standards).

It is important to pay attention to the quality of this material as the unscrupulous manufacturers can in large volumes to add phthalates into it, which are capable of serious harm to health.

Advantages and disadvantages of PVC panels

The ceiling in the bathroom from PVC panels has all the features necessary for this room. The affordable price and lightness of the installation makes this material almost perfect for rooms with high humidity.

Of course, in poor-quality PVC elements, the main disadvantage is their harmful effect on human health and the environment, but if you buy materials for finishing the house only in proven places, there will be no such problems.

Disadvantages of PVC panels:

1. This material is fragile enough, so it is easy to damage during installation.
2. If the surface on which the PVC frame is attached is irregular, then a part of the room space will be hidden under the panels.
3. Embossed materials allocate a specific unpleasant odor.

Advantages of PVC panels:

1. A large selection of shades, makes such a material suitable for any interior style.
2. Due to the low sensitivity to high humidity and synthetic origin, PVC panels are resistant to fungal and mold damage.
3. PVC panels on the ceiling in the bathroom can be installed independently, possessing a minimum set of tools and knowledge in the construction sphere.
4. The ceiling of such material is easy to repair as if necessary, you can remove one of the parts, without disassembled the entire design.
5. Under plastic panels, electrocommunications and materials used to enhance thermal insulation and noise insulation can be hidden.
6. PVC panels can be washed with water with conventional detergents.
7. The PVC ceiling finishes will cost you much cheaper than for example, the installation of a tension or suspended ceiling.
8. PVC have enough long service life (10-15 years).
9. Good panels have high fireproof.

Thanks to all the above advantages, PVC ceilings enjoy the ever-increasing stir.

Choosing PVC panels

When buying such materials, it is necessary to pay special attention to their quality as PVC ceiling assembled from defective components will be inactively looking, and may also be distinguished by hazardous health.

In order not to acquire a fake made in handicraft conditions, you need to ask the seller a certificate for the goods. You should also explore the panels for the presence of irregularities, extraneous enclosures and hooks.

The thickness of the quality material must be 8-10 mm, the length typically reaches 3 meters, but if necessary, you can order longer copies.

In any case, it is almost impossible to distinguish high-quality material from poor quality, so it is best to purchase PVC panels in proven specialized stores.

Do I need to level the walls before installing the frame?

PVC panels can be installed in two ways: frame and frameless on glue nails. One of the advantages of the framework method is that it hides all the irregularities of the surface surface, therefore, in most cases, the preliminary finishes will not need.

However, if the ceiling has very large irregularities, and the fastening of the frame at one level is not possible, it will have to work on such a surface, eliminating particularly obvious defects.

PVC elements that are installed on glue nails have a smaller ability to hide the ceiling shortcomings, so the skeleton method is greater popularity.

At the stage of preparatory work, it is necessary to get rid of the old finish, in the event that it creptates, and also process the ceiling with a special antiseptic, eliminating mold marks and fungus. All existing cracks and holes should be sealed with a cement-based plaster, otherwise the ceiling particle can begin to turn on the finished plastic structure, which sooner or later will need to replace some panels.

Tools and materials for installation of a frame for PVC panels

The frame under the panel on the ceiling in the bathroom can be made of metal or wood. Of course, the metal frame is more suitable for premises with high humidity, however, you can install a wooden crate if you process with special compositions before installing the rail, for example, with a water bath with olifa. Processing wooden rails need after the frame will be assembled.

Metal profiles initially have all the properties that are necessary for a long service frame in the bathroom, so they do not require any pre-treatment.

What instruments and materials will be required for mounting frames in addition to profiles:

• perforator;
• screwdriver;
• electrol holder or hacksaw for metal;
• building stapler.
• building level;
• roulette;

Independent assembly of carcass

The framework for PVC panels can collect even a person inexperienced in the construction craft, the main thing is to make accurate measurements and unmistakably calculate the required amount of material.

Collect the frame:

1. With the help of the level we find the point of the ceiling, which is closest to the floor.
2. Retreat from the revealed point 5 cm. Down the wall.
3. At this level, we make a mark throughout the perimeter of the room using a water or laser level and a folding thread.
4. With the help of self-tapping screws, we screw at the level of these lines guides dd profile, directly to the wall tile. If the cross, which were used when installing the tile, had a width of 2 - 2.5 mm, then the screws can be screwed into the seam between the tile.
5. We do the cross-marking on the ceiling, with a step between 40 cm lines (the markup should pass across the directions of PVC panels).
6. Now, we attach direct suspensions to the ceiling, bent them into the P-shaped form, the step between them should be 40 - 50 cm.
7. To the suspensions, we attach the wide range of profile, starting their ends into the guides attached to the walls.
8. Free suspension cuts bend to the sides.
9. If the surface on which the frame is installed is perfectly smooth, the profile can be secured without suspensions directly to the ceiling.
10. In places where the location of the lamps is planned, additional profiles must be attached to the crate.

The frame under the Ceiling of PVC panels in the bathroom is installed quite simply and quickly, this is another reason why this design is popular.

Attachment to PVC panels

When the frame is mounted on the ceiling, you can go to the installation of PVC elements. It is important to comply with the sequence of installing plastic components, and special attention should be paid to the closure of the gap between the wall and the ceiling. You can mock the perimeter of the room the ceiling plinth or a special L-shaped profile for PVC panels.

Attach the PVC panel to the frame:

1. On the perimeter of the bathroom ceiling, we set a L-shaped profile for PVC.
2. We measure the width of the ceiling across the profiles installed earlier and cut into line with the obtained PVC panel measurements.
3. From the first panel you need to remove the chamfer, for better entry into the groove of the L-shaped profile.
4. Now I alternately install the remaining PVC panels with the help of self-tapping screws with a press washer or construction stapler, and it is necessary to ensure that the chamfer of one panel falls into the dads other.
5. In the course of installing panels, mount the lighting devices, making small holes in plastic elements at the places of attachment of the lamps with a drill with a special nozzle or drill and a sharp knife.
6. Through the same holes we skip the wires for lighting devices.
7. Before installing the last panel, measure the distance from the penultimate item to the starting profile.
8. We cut the last panel along into line with the size obtained.
9. Fresh the last component of the plastic ceiling to the frame, the calling of its edge into the starting profile using a narrow spatula or a stupid wide knife.
10. Mount the gap between the L-shaped profile and the bathroom wall with a white silicone.
11. The installation of the PVC ceiling is completed, it remains only to wipe its surface from the dust during the installation process.

Install the Ceiling of PVC panels in the bathroom - a great solution, because this material perfectly fits into rooms with high humidity. The only condition for the rooms decorated in such material is the mandatory presence of a ventilation system as the pair descended during the inclusion of hot water is needed.

Remember that the quality of the framework is the key to the durability of the structure.

A durable and smooth doomle for plastic panels is a mandatory attribute with such a ceiling or wall finish. There are several options for arranging a reliable frame under the PVC panel, and each of the installation methods will be performed on their own.

Plastic PVC panels - finishing material

Polyvinyl chloride panels have an impressive set of repair benefits:

• Unrivaled lightness - a square meter of plastic cladding weighs less than 1 kilogram. This allows the so-called "weak" walls and ceilings to be separated by plastic, which will not solve a large load;
• Economical cost. Ceiling or wall plastic for an order (that is, ten times!) Cheaper marble, natural stone or high-quality ceramic tiles;
• High moisture resistance, including a saturated and hot pair. However, it is necessary to take into account that the plastic is not becoming an obstacle - he is inert toH. 2 O., only. If necessary, protect the walls and ceiling from water exposure without prior waterproofing can not do;
• Time-consuming wall alignment and ceiling is not required, this function performs a competently installed lamp for PVC panels;
• Ease of sanitary processing and durability of plastic finish for decades;
• Large selection of colors and sizes. If you wish, you can choose such panels that the installation costs will be minimal.

To the serious lack of wall and ceiling plastic should be in combustion. This is especially important when repairing the toilet and other small rooms. The ignition of polyvinyl chloride in a small closed space is dangerous toxic combustion products, a person may suffocate in just a few minutes. In addition, wall plastic narrows the size of the room - at least a few centimeters on each side. If the wall is uneven, then the room will decrease even stronger.

The quality of installation of plastic panels is almost entirely dependent on the quality of the crate. An unprofitable either, the stem-panel sheds, an unprofitable frame, cannot be completely constructed.

Most often, the frame is mounted from ordinary wooden plates, due to the simplicity of their installation and the low cost of wood. Possible more nontrivial options for the crates, but they are relevant in exceptional cases (see below).

How to make a crate under the PVC panels from wooden plates?

For the inner frame made of wood, rails are selected by cross section from 20x20 mm, this is at least. It is important that the rails are straight and smooth, without bitch and cracks. Extract a broken element from the frame and replace it with a new rail is quite difficult. Guide crates will be perpendicular to the installed panels, the step between the rails is not more than 50 cm.

First of all, it should be estimated whether the tree needs in antiseptic processing. As a rule, for sanitary room and kitchens, such treatment is obligatory, due to the high humidity of such rooms. Even before the start of installation work, the stacks of the rivers are unleashed, each is processed by the antiseptic composition by means of a brush or spray gun. It is advisable to perform such an outdoor processing a day before the installation - then the tree will die efficiently, and the unpleasant pairs do not have to inhale hard.

Impregnated rails first set the ceiling perimeter or wall. Food rectangle formed by four racks is the basis of the whole frame. When installing the perimeter rails, it is necessary to use the level and plumb and measure several times "framework" before fastening. The perimeter will certainly not fit the wall tightly, so there are additional bars between the slats and the walls (ceiling). Fasteners are performed by self-peer screws in pre-drilled holes, the fastener step is not more than 40 cm.

When a wooden perimeter is created on all the walls, additional guides are mounted in 35-45 cm increments. Here also has its own trick - every 50 cm. These extended rails must be additionally fixed to walls or ceiling, otherwise the entire design will resist. Use a massive metal ruler to control the rectinity of the guide rails by conducting it between the perimeter side racks.

The finished frame should be durable - even if not at the level fittings under the liningBut without a backlash and any irregularities. After stuffing on the rails of plastic accessories (endings, corners, turns, etc.), you can once again appreciate the Fortress of the frame - and, if necessary, strengthen it with additional slats and screws. Then the PVC panels slide on the mounting place freely, and the assembly of plastic parts of the room will take several hours from force.

Disease for PVC panels from plastic elements

Plastic lamp for plastic panels is somewhat more expensive than a wooden frame and more sensitive to the irregularities of the walls. Its advantages should include perfect immunity to mold and rotting, high speed and factory montage reliability.

Plastic guides are supplied with special clips clasps, whose design is similar to the castle "Dad-Mom" on laminate or siding. The plastic is not required to handle antiseptics, you can immediately begin the installation of the wall or ceiling PVC cladding. But! The side stands perimeter will still have to do from plastic rivers, because The strength of plastic guides for a large decoration area is not enough.

Everything without exception plastic guides should be strictly perpendicular to the installation of panels. If at least one thing is rejected - the clips-latch will not work, and the entire design will have to redo. Therefore, the plastic frame is more often used when finishing small walls in baths and pairs - when high humidity makes a frame of a frame in an unacceptable material.

Disease for plastic panels made of metal profiles

This type of crate is extremely rare, due to the considerable value of aluminum profiles. How to make a crate under the PVC panel made of metal? Yes, almost the same as a similar design for plasterboard ceilings:

• First along the perimeter of the wall / ceiling, the starting P-shaped profile is installed exactly by level;
• Next, metal guides with perforation under PVC-panel fasteners are rushing;
• Perforated guides are additionally fixed to the ceiling or walls with screws, in 80-90 cm increments;
• Plastic fittings are installed, after which it is possible to start the installation of the panels themselves.

The strength of the metal frame is significantly higher than the wooden or plastic counterparts, and the step between the guides will be allowed much more - 80 cm against 40 cm. But the price of an aluminum frame can exceed the cost of all panels several times. Therefore, it is used if there are excess fastening profiles after mounting drywall.

Composite crates also proven well established - from a metal perimeter, to which wooden or plastic rails are attached. Value for price / quality in such hybrid structures should be recognized as optimal for plastic panels used for decoration of walls and ceilings.

Finishing materials for the ceiling are presented in a wide variety, so it is easy to choose the preferred option. Follow this on your own preferences, interior style and requirements for quality and reliability indicators. One of the popular options - PVC panels.

They are distinguished by universality and simplicity of use, including for the surface of the walls. The installation process is simple, so each person can perform it with his own hands, starting with creating a frame. The main thing is to create a solid crate under the design of PVC panels. It will be a guarantee that the ceiling design will be reliable and durable.

Attention!Pay attention to all parts when creating a design that acts as a frame, strictly adhering to the instructions on the video that will show the process steps.

What is a doom or frame?

The doom is the basis of the structure. It implies with the ability to mount the panels on the ceiling and walls of the premises. Frames are made of various materials, including plastic.

Among the advantages of this option are the following:

1. Resistance to temperature drops.
2. Easy installation for any surface, including walls.
3. Resistance to moisture.
4. The ability to use repeatedly, saving funds.
5. Stability to deformations.

Frames are made from other materials. Among them are distinguished metal profiles or wooden slats. The tree is not resistant to moisture, temperature drops, which will negatively affect the operation of the walls for the walls and the ceiling. The result becomes visible deformations. Metal design is not always suitable for PVC, as it becomes too heavy.

When compared with these materials, the skeleton from PVC has advantages. Among them allocate simplicity and efficiency of installation, including for the surface of the walls. The panels are easily attached to each other, eliminating the formation of gaps or cracks. Additionally use clips that provide reliable adjacent to the wall or surface.

Another positive feature is resistance to mold and fungus. Plastic designs are fireproof, easily carry moisture and dampness, which cannot be said about wooden or metal analogs. If required, plastic frame is used as a cable for organizing wiring.

What will come in handy in the process of creating?

You can create it with your own hands. This process is simple, and the tools that will be required for this will probably have every home. If you wish, you can call the command of experienced masters, which will quickly cope with the task set before them. But independent execution will give reason to be proud of their own successes.

Prepare the following tools:

1. Screwdriver.
2. Drill.
3. Roulette or ruler.
4. Construction level, optimal choice - water option.
5. Hacksaw.

This is enough to create a frame of PVC. Despite the fact that the cost will be more expensive than the wooden, the result will pleasantly surprise you. It is not necessary to use antiseptics, and the installation itself is based on the use of special clips-fasteners, which facilitates the process.

Remember that decorative elements are attached to a plastic frame in a perpendicular position relative to the structural elements. Compliance with this simple recommendation guarantees the quality of attachment and the lack of problems later.

Stages of construction installation

In order for the fastening of the PVC crates from successfully, adhere to the recommendations of professionals. The first thing to pay attention is the distance between the planks. This is relevant for both the ceiling and walls. The optimal distance is a pitch of 30 cm. PVC rails themselves are in the perpendicular position to the panels. In other words, if the panels are mounted in a vertical position, the ridge mount is performed horizontally and in reverse order.

An important point is the markup. It is held at the initial stage. Without this, the high-quality frame for the ceiling or walls will not be created. If it is difficult for you to mark yourself on your own, look at the video. It will introduce the details of the markup process for the ceiling and walls.

The frame is fixed around the perimeter of the room, for this measure the length of the walls, finding the lowest angle, spend the horizontal line on which the frame is started. The panels from the PVC material are connected to each other by means of hacksaw and stusl. These tools will allow a good incision on the panels with minimal dimensions. The fastening of the material is carried out every 25-30 cm.

If desired, it is possible to facilitate this process. To do this, stretch the fishing line. This makes it easy to install and reduces the likelihood of error.

If you managed to estimate the advantages of the crates from PVC and cladding the ceiling and walls by plastic panels, thoroughly prepare for the installation process. To perform actions correctly, read the video. It will allow you to understand the subtleties of the process of creating the ceiling, and avoid typical errors. The video is the best assistant who guarantees the correctness of the completion of the facing.