Try cutting out this craft. She probably climbs your loved ones by placing it in a prominent place, for example, on the shelf. For the manufacture of such a craft, you will need the following:
Refilling Tools.
We prepare your desktop
First of all, you need to prepare your desk on which you will work. It should not be unnecessary things and every tool should be at hand. Not everyone has its desktop and certainly thought over to its creation. It is not difficult to make the table - it's hard to choose a place for it in the house. The ideal option is a warmed balcony where you can make a cradle at any time. I already wrote about the preparation of the table in a separate article and tried to describe the whole process of its creation as possible. If you do not know how to prepare your workplace, then read the following article. After completed the process of creating the table, try to start choosing your future craft.
Choose high-quality material
The main material is plywood. The choice is always complicated. Each of us probably came across such a problem as stratifying plywood from the end part and asked such a question, what is such a stratification? Well, mostly, it is mainly due to poor-quality plywood. If you took the jigscription in your hands not the first time, you can pick up the plywood from the residues from the previous craft. If you are new to drinking and you do not have plywood, then buy it in a construction store. Select material for drinking is always difficult. You need to choose a fane at carefully, more often to look at the flavors of the tree (bitch, cracks) and draw conclusions. The complexity of the selection of plywood lies in the fact that no matter how much its defects and the shelf life. For example, you bought Phaneur, cleared it, transferred the drawing and suddenly she began to settle. Of course, it happened almost for everyone and it was oh as unpleasant. So it is better to pay attention to when choosing and choosing a good fane. I wrote a special article in which all the principles of plywood choices are stood.
Stripping plywood
We clean our plywood with the help of sandpaper. As you already know, the "medium-trim" and "fine-grained" skirt is used to stripping plywood in drinking. In construction stores, you probably saw skins (in a different emery paper), they will need them. In your work you will need "coarse-grained", "medium-sized" and "fine-grained" skar. Each of them has its own property, but completely different sputtering at which it is classified. The "coarser-grained" skunk is used to treat coarse plywood, i.e. which has many defects, chips, as well as cracks.
The "medium-sized" skar serves to process plywood after a "large" skirt and has a small spraying. "Smallozing" or otherwise "zero". Such sandpaper serves as the final process of plywood stripping. It gives plywood smoothness, and therefore plywood will be pleasant to the touch. Grind the harvested Phasepno, starting with the medium and ending with small emery. Grinding along the layers, and not across. A well ground surface should be smooth, completely smooth, glossy in light and silky to the touch. How best to prepare Phaneur to drink and whatever empty paper to choose read here. After stripping, check the Phaneur for burrs and small irregularities. If there are no visible defects, you can crime to the process of translation of the drawing.
Translation of drawing
For me, the drawing translation was always the main process in work. I will tell you a couple of rules, as well as tips for high-quality drawing translation. Many translate the drawing on the Faneur not only with the help of a pencil and copying, but also with the help of the "black ribbon", glue the drawing with plywood, then wash off the drawing with water and the drawing markup remains on the plywood. In general, there are many ways, but I will tell about the most common way. To transfer the drawing to the harvested Phaneur, you must use a copy, ruler, sharp pencil and not writing handle. Copy the drawing, in the plywood with the help of the buttons or simply hold your left hand. Check if the drawing is suitable for dimensions. Watch drawing position so that it is more economical to use a sheet of plywood. Translate the drawing using a not writing handle and ruler. It is not worth a hurry, because your future handicraft depends on the drawing.
Drill holes in detail
As you have already noticed that there are parts of the grooves that need to be filled from the inside. To cut such details, it is necessary to drill holes in them about the help of a hand-haired drill or, as in the old manner, do the holes with a seboard. By the way, the diameter of the hole should be at least 1 mm otherwise you can damage the elements of the drawing, which, alas, sometimes, it is difficult to restore. In order to do not damage your desktop when drilling holes, it is necessary to put on the workpiece so as not to damage the desktop. Over the holes are always difficult to drill and so ask your friend to help you in your business.
Drinking details
Rules for drinking a lot, but it is necessary to build up to the most common. First of all, it is necessary to cut the inner parts, only then on the outer pattern. When drinking is no need to hurry. The main thing, when drinking, keep the jigsik always right at an angle of 90 degrees. Put the details on the exactly marked lines. Lobzik movements should always be smooth up and down. Also, do not forget to follow your posture. Try not to allow SKOs and irregularities. If when drinking you left the line, you should not worry. Such spaces, irregularities can be removed using flat files or "coarse-grained" skirt.
Relaxation
When drinking, we often get tired. Often tired fingers of hands as well as eyes that are always in tension. When working, of course, everyone gets tired. In order to reduce the load, you need to do a pair of exercises. Exercises you can receive here. Exercises do in the process of work several times.
Stripping details
Clean the details of the future craft should always be carefully. At the very beginning of work, you have already cleaned up the Phanener with emery paper. Now you have already a small part of the plywood stripping. "Mediterranean" skirt cleaned the ribs of details and the back of plywood. The "fine-grained" skin is considered the final stage of stripping details. Small skurt it is better to clean the front part of the details. When processing plywood do not hurry. You can use the rounded file, with which it is convenient to clean the inside of the holes. Try to work out without burrs and irregularities.
Build details
Assembling details of our crafts here is not so complicated. In order to accomplish the right assembly of parts, you need to read the following article in which it is written in detail about all the details of the assembly. After the details are collected in one common craft without any problems, then proceed to their gluing.
Glue details
Bonde parts of the shelves are necessary with the help of the "PVA" or "Titan" glue. You do not need a lot of glue. The collected cracker on the glue is better to tie a durable thread, tighten and put on drying. The workpaper gluits about 10-15 minutes.
Burning crafts
To decorate our craft pattern (for example, around the edges of the crafts) you will need an electric heating. Beautifully smeared the pattern is very difficult. Sign out patterns, you need to draw a pencil pattern after drawing. How to work with the electric heating and add patterns on the shelf you can read here.
Laccination crafts
Optionally, you can transform our craft, covering it with a lacquer "on wood" better than colorless. Read how it is better to lacquer. Try to choose high-quality varnish. Produce varnishing with a special brush "for glue". Do not hurry. Try not to leave visible divorces and scratches on the cradle.
No home, the more adjacent territory, it is impossible to present at least without several decorative plants. But if there are many (especially in the house), then the problem arises - how to compactly place, confidently with the dimensions of the room. On the site, it is also quite difficult to create an original composition, if it is rather modest sizes. As a rule, the output is one - in several levels, with a difference in height.
In such situations, the flower stands made with their own hands is one of the best solutions. Explanation Simple - the tree is processed easily, the simplest tools, and the price of lumber is available for any category of population.
What to take into account:
- The concept of "Wood Stand" should not be interpreted literally. It can be made from products based on wood - chipboard, MDF, ASS, plywood sheets multilayer. Original structures are obtained and with combinations of materials. The most realizable option is a metal (rack, supports) + wood (shelves). It all depends on the calculated load and the length of the span.
- In the process of developing the drawing, it is necessary to take into account the specifics of the station placement. It may be a massive (stationary installation, as a furnishing object), light portable (often used as a temporary design; for example, for the period of growing seedlings), suspended, folding, outdoor, and so on. Therefore, the home master always has a choice, from which it is and how to make a stand stand.
- The width of the shelves is selected depending on which size of the vases is planned for them. There is no single template in this regard, only the recommendation is for good stability between the pot and the cutting line should be at least 2.5 cm (from any of the parties). As for the thickness, the main criterion is the total load.
Everything else belonging to the issue of the design geometry is to the personal discretion of the wizard.
If we are talking about solid wood, then for its cutting you need a hacksaw; It's clear. But with the sheet material differently. To achieve accurate and high-quality cut, you will need a jigsaw. What is better (electric or manual) and the rules for working with it in detail. By the way, they can also decorate a wooden flower stand.
How to choose materials:
- Under the treatment of varnish. In this case, an important factor is a texture of a tree if the master's task is not only to hold the stand for flowers, but also use it for additional decoration of the room or territory. It is recommended to choose the breeds deciduous, besides, they will not be shed in the sun, unlike coniferous. The same applies to plywood; Optimally - from birch veneer. If the stand will be used in the conditions of dampness, then you need to pay attention to the pine or larch. The cost of sawn timber is low, moreover, it is these breeds (from inexpensive) less susceptible to rotting.
- Under painting. With such a surface design, the texture does not play any role. But only the coniferous breed is already preferably. On them, paint lies easier and keeps longer.
Sketches and drawings Stands for flowers
Mobile options
Such multi-tiered supports are well suited to dackets / gardeners, since the task of growing seedlings is simply solved. These designs are installed in the house as needed. But if you choose high-quality wood, with the mind to approach external design, then such a stand will easily fit into any interior.
From pipes and wood
If the stand is relatively small, 2 to 3 vase medium sizes, then instead of steel pipes are often used aluminum, or even plastic analogs. It is only necessary to choose the right cross section and the wall thickness.
Stand-tables
The designs are more massive, but their advantage is that they are easily "replicated." Therefore, it can be used not only for colors, but also, for example, under TV, music center, books, and so on.
Other original designs:
Nuances assembling stands
The most durable structures of wood are obtained by "double" compounds of parts - glue and fastener element. As the first, the compositions for carpentry work (most often PVA, casein), second - self-tapping screws. Fixing the wooden parts of the stand on the nails is undesirable. There are several reasons for this.
- The feet of fasteners easily splits dry wood (and other for the supports and does not take).
- Maintainability of such structures is extremely low.
- To send a nail strictly along the axis is quite difficult. Since the shelves for colors are not particularly thick, then the tip of the metric will necessarily come out.
When decorating the design it is worth using paints on an acrylic or oil basis. They have many advantages, one of which is resistance to burnout. For supports manufactured for installation on the territory - the factor is important.
With your own hands you can make any stand. Therefore, blindly copy drawings is not the best solution. They are only taken as the basis, and the dimensions of individual elements are changed at their own discretion. Self-made stand preferably the store in that it turns out to be placed in a specific (selected) place, organically writing in the overall design of the room without unnecessary furniture permutations and the like.
A homemade master who has not been forgotten what scaling is fully able to develop and own a drawing based on sketch. As an option - choose online photos on the Internet, download, print with the desired magnification and determine the size of the main elements acceptable for yourself. The rest will complement the fantasy and the ability to think "volumetric". Do with your own hands - this is not a template, but an element of creativity. The main thing is to want, and everything will certainly succeed. After all, even the slightest mistake, the miscalculation can always be presented as a new direction in art (especially since few in it really understand), exclusive, original style, and so on.
Stand for magazines and newspapers made from plywood is very beautiful. In this article, I will describe in detail that it will be necessary for this and how to make it at home without any experience. Well, proceed. We will make our product from plywood 10 mm.
Tool -lobzik manual with files to it. To complete the work, we need a veil, epoxy glue, wood varnish and sandpaper.
And so we decided that we need to work. Let's start in order, plywood pieces we can buy in the store. Phanelo is chosen clean without cracks and any vices. We take the labzik handmade will learn to work with your hands.
The electric jigsik will not go, there the pinks are wide and we will not be able to make turns to them which we need. Pilking is better to take on the metal they are the same as on the tree, but to cut them is much better. Morilka is now sold different pick up the color you like.
I used under the red tree powder divorced with water. I glued the shelf on the epoxy resin, but you can glue on PVA only take professional glue. The lacquer used the NC on the tree, he dries quickly, you can use other wood varnishes. There are a lot of them.
We buy a shallow and large grain paper. Yes, I almost forgot, we need a drill. Electric drill is that we need, you can use manual.
We will definitely need buttons and copy paper. Now we have everything for work, proceed.
The stand consists of five parts. We need to cut two large walls, two small and bottom of our stand. Let's start with a small sidewall, choose a piece of plywood in size of the details.
Little sidewall
We put a copy of the camera at the top of the drawing at the corners of the drift buttons and the pencil, we supply our drawing. We remove the buttons to remove the drawing and the copy.
Now we need to drill holes to insert a drink through them. Drilling those places that we will cut down. The drill will be needed three millimeters.
Big sidewall
We take the jack. One end of the peel is clamped, and the second we skip through the hole and clamp the screw. I used to hold the Pillar Pillard for Effort, if we tighten weakly, the pilper pops up. I think you have already decided where you will cut.
It should be a well-lit, convenient for you. Immediately I will say that dust will be a lot of carpets of the track immediately remove away, and at the end of the work, vacuuming and wet cleaning. From the beginning, drink the patterns of the middle, drinking one turn the pink and insert into the next one.
Bottom stand
When we drank everything in the middle, proceed to drink the edges of our stand. And so drinking one we do this operation with the rest. When drinking a jigsaw, keep at the angle of ninety degrees so that you did not have oblique.
Saws slowly exactly the feature otherwise then you will wait a long time. It is better to dry longer than then you will spend a lot of time on stripping. When sawing, follow the safety equipment, so as not to impass yourself.
Do not keep your hand in front of the jigsaw in the event of a breakdown of the millet you can paint your hand. See so that you do not darn what you saw. I think you did everything and you saw all five blanks of a stand for magazines and newspapers.
View from above
The next stage of stripping, we will clean the cuts from the pink. Now, from how you drank exactly, it will depend on how much time you spend on stripping. We clean with the beginning of the sandpaper on the largest, and then we go fine.
As well as well, you will read the beauty of your stand. If you are tired, then set aside, and then when the mood will continue. Do not rush to move to the next stage.
Well, if you are all ready to start starving the details of the stand. It must be done before gluing, because the simulator will not wove the surface through the glue. You, I think I decided how to starve
The main rule here is evenly covered with a tassel and rub rag. Look well so that there were no outers and everywhere was blossomed. Do not forget to wear rubber gloves, otherwise it is very difficult to wash your hands after the veil.
Take care of the eyes when hit immediately, rinse with cold water. After the sea, let's dry the details well, and then we proceed to the assembly. This responsible stage will take this seriously. On the template we plan a selection where we will drill holes in a depth of five millimeters, and three millimeters thick.
In every detail we need to drill four holes. Cleash the drill to the drill restrictions on the depth of drilling be sure to do not drill through. This can be done in a simple way. Leaving five millimeters of the drill to make sure to see the slim tape or sticky tape.
Gently drill twenty-four holes. Then we harvest twelve compounds, I used a simple nail three millimeter thick. Saw on metal to cut down the length of nine millimeters twelve pieces
Collect on the dry from the beginning and see if everything happened well. If somewhere it does not fit without lazy, don't begin to glue everything. Let's start gluing and then we will not fix anything. I used epoxy resin for gluing.
We divorce the resin exactly by proportions as indicated in the instructions. Many breeds do not need a third of a teaspoon quite usually. Matching well wrapped the holes in large sidewalls harvested cloves of six to each and combine our product.
If you all happen to put on the floor and press what neither be at the top. See that the stand is not overloaded under load. We give time to dry the glue and proceed to completion. Locate or put something before varnishing on the floor.
All, standing for magazines and newspapers from plywood with your own hands you are ready.
A variety of stands have many functions, most importantly - they are practical and reliable. With the help of these furniture elements, you can diversify the interior of any room, to properly organize space, etc. As the main material for the manufacture of the supports, almost all are used: wood, plastic, iron, plywood, marble, etc. Crafts from plywood for anyone are not uncommon, they are doing for a variety of goals, including decoration of the room or reflecting the territory. For these purposes use FSF or FC. Their characteristics allow for a long time to admire the products, resistance to dampness and temperature drops will allow placing crafts anywhere where the soul wishes. The only difference between these plywood is the glue, which is sampled by layers of veneer. The first version of plywood is too toxic, so they are used only for outdoor work. In order to keep the stands in the room, it is better to use plywood FC. If you decide to make crafts from plywood yourself, it must be able to understand its views and properties. You may encounter ciphers sh1 and sh2 this plywood is single and double-sided. NSh Plywood Processing, which means that you still have to spend time to prepare it for processing. The choice of such parameters depends on where and in what conditions it is planned to be used. For example, plywood is attached on the wall only on one side, but a statuette or stand on all sides.
What plywood to make a stand
Regarding the texture of plywood, here you select on the basis of personal preferences. Plywood from the birch veneer is perfect if you wish to preserve the natural look of the tree. If painting or varnishing is planned, it is better to choose a pine veneer. To paint the finished product, choose paints on an oil or acrylic basis, because they are not so bodied in the sun. His initial view of the stand will retain for several years. It is necessary, when buying plywood, it should be examined for the presence of inclusions and sunsity. Any defects complicate the creation process. If you want to make a stand with a jigsaw, then it is better to choose a thin paneur. In addition to the material, you also need to pick up the tool. Electrical models of jigsaws are more expensive, but they have a number of advantages:
Good speed and cutting accuracy;
Cleaning edges;
It is possible to change the cut parameters.
In general, the tool of this type is important in the farm, because it can work not only with a tree, but also with other materials. It's more difficult to work with a hand tool, the cutting canvases are very often broken, so it is better to immediately buy several spare. In general, make a product with a manual jigsaw to spend a lot of time and pylons, but it will save money.
How to hold a stand yourself
Stand can be made for flowers, for newspapers, and many more different options. But in order not to do, you should always start with the drawing. To work to buy, you need to Faneru, Lobzik, Morilka, Wooden Varnish and Emery Paper. In addition to all this, you can prepare a drill, buttons and copy paper. Further in detail, consider how to make an independent support for logs. Our stand consists of 5 parts, we need to cut down the bottom, two small sidewalls and two large.
We start with a little sidewall, you first need to put a copy of the movie on the plywood. The drawing from above is attached to the buttons, and the drawing will be burned with a pencil. Drill the places you need to cut off. On this, the procedure with a small sideway ended, proceed to large sides. Lobzik One end of the peel to clamp, the second skip through the hole and pinch the screw. A lot of dust will be in the process of work, so the carpets can immediately remove. If there are patterns, they are better to start cut from the middle of the sheet. After the middle, you need to cut the edges of the support, the jigscription in the process of work should be kept at an angle of ninety degrees, then it will not be oblique. I need to cut smoothly and slowly, it is better to spend time on it than to still clean the irregularities. In the process of work, be sure to follow safety technique. The final stage is cleaning from dust, first the emery paper more larger, then shallow. After stripping, the stand should be treated with a verse, it is better to make up to gluing.
The process is simple, the main thing is evenly covering the surface with a brush and lose with a cloth. Do not forget to wear gloves, and in case you get into the eyes immediately rinse with water. We had four details, each you need to do four holes. In total, they will be 24, then you need to prepare twelve compounds. All items to collect on dry and check well whether it turned out. After checking, all parts glue with a suitable adhesive substance. After glue, you need to put a stand and press something hard on top. Be sure to make sure that the product does not bother under load. The process of varnishing is beginning to bottom, only then pass the tassel from all sides. Lacation is desirable to spend in several layers.
Why do you need a plywood stand
Products from plywood is convenient and practical, the stand of it is a very important detail in the room, as you can put a lot of things on it. If a person loves to make her own hands, then the option to make a stand from plywood with your own hands is perfect. In the event that there is a desire, but there is not enough time or some other reasons, the stand can be purchased ready. To make the finished product, it is practical and durable, you need to use high-quality lumber, which offers online store plywood monolith. The store catalog contains the best varieties of products from the largest Russian suppliers and manufacturers of plywood, furniture shields and similar materials. Product purchased here have certificates of quality and safety. Checkout, pay the goods and wait for the delivery without leaving the house.
I want to show you how I did the stands under hot from plywood.
He took the Fanur and painted the circles of suitable size on it.
Then you need to take a hand logs and cut these circles with it.
It is like this :) After that, it is necessary to subwind the surface and edge of the cut slightly to the skin.
Then I took some simple silhouettes and translated them to your billets with a copy paper.
In order to start drinking a drawing, you need to drill in it a hole for a sawmill.
Thus, insert the sawnur and begin to drink along the contour.
And that's what happened.
Then the entire workpiece must be carefully sanded from all sides - outside and inside. I used the usual skirt, grinding lumps, and in particularly thin and uncomfortable places even Natil.
On the back of the coach, I wrote down a congratulation.
Since I hope that the stands are under hot, they will be used for their intended purpose, I did not cover them with varnish, but only a thin layer of olifa applied. Olifu was applied by a conventional foam sponge.
So that the stands do not slide on the table, they need "legs". A piece of unnecessary skin is perfect for this purpose.
I glued leather "legs" glue moment. It was the final chord.
These are such supports from me.
