The portal about the repair of the bathroom. Useful advice

Placement of furniture in the bathroom. Rational use of Square

The space is limited, but you need to connect several items to the water supply and sewage. And do not forget about ergonomics and elementary feeling of comfort. We study the allowable distances between the plumbing, choose a bath, washbasin and toilet bowl with a bidet.

What is capable of magic Aquamarine: a project of a bathroom of designer Evgenia Shevchenko "." Width \u003d "100%"\u003e

  • 1 of 1.

On the picture:

Where to begin?

Compile plan. To do this, you need to know the exact size of the bathroom, the location of the rising sewage and water supply. Blacksmage plan with a scale and a pencil patch the placement of plumbing in the bathroom. Even more convenient: use the scheduler from the Internet (there is, for example, on the IKEA website). Let us dwell on the main elements of this plan.

Mojdodyr A582 10/20 XX from Villeroy & Boch.

Washbasin with a mirror

In the spotlight. Ideally, this is the first thing that should fall into the field of view of the included in the bathroom. (From the point of view of the feeling of comfort in the bathroom, it is considered an error if the main attention will attract a toilet or bath). The washbasin is mounted at an altitude of 80 cm from the floor. It must be at least 70 cm of free space.

BN46A / BN50A sink from FLAMINIA.

Two sinks or one

Depends on personal habits. If you calmly treat the joint commitment of the morning or evening toilet and used to brushing your teeth with someone from the household, then put two sinks. It is best to combine them with one tabletop. Naturally, the bathroom should be enough space. The distance between the sinks along the axis axis is at least 90 cm, and between the edges of the shell - 25 cm.

Toilet bowl K-3393 from Kohler.

Toilet

Tied to the riser. They try to post as close to the sewage riser. To put the toilet on a large distance from the riser is not recommended: it is difficult to comply with the necessary angle of inclination of a drain pipe into two degrees (you have to raise the floor level or hide the pipe into the wall). The more bends in it, the most likely the risk of breaking. The distance from the front edge of the toilet to the opposite wall should not be 60 cm, on the sides - at least 25 cm on each side. And remember: from the point of view of psychological comfort, the toilet should not be the first subject striking at the entrance to the bathroom.

750 Cer750B bidet from agape.

Bidet

Put next to the toilet. The location conditions are the same: 60 cm from the front edge to the wall opposite and 25 cm on the sides. The bidet does not always be able to place in small bathrooms of typical apartments. In this case, you can buy a toilet with the functions of the bidet - there are now a lot of such models in both budget and top segments (there is Duravit, Ideal Standard, Vitra).

EUROPA 10 shower cabin from Samo.

Bath or cabin

Depends on the area. Plumbing accommodation in the combined bathroom allows options. If the short wall length in the bathroom from 160 cm, the bath is better to place along it. The elongated rectangular bathroom will seem proportionate to this placement. If the short wall is less than one and a half meters, then think, do not replace the bath with the cabin or learn the range of angular models. Because putting a bath along the long wall in a narrow room - not the best option. As in the case of a washbasin, the bathroom should not be 70 cm of free space.

Bath Diva Bathtub from Burgbad.

Detached bath

Not an option for a typical apartment. The bathroom for the detached bath must be at least 9 square meters. meters. Only in this case it makes sense to think about such a complex (from the point of view of installation and connection) of the design. Serious requirements are presented to the floor and to the ceilings: they should be more durable than when installing a conventional wall-off bath: detached together with the entire installation system usually weighs much more.

Sink 1116601101 from IDO.

Washer

Not far from plum. The drain hose of the machine can not be longer than one and a half meters, and the location of the compound with the drain pipe should be at an altitude of 70-90 cm from the floor. At the same time, there should be enough free space before the machine with front load to open the hatch. Options with a lack of area are mini-machine for sink and vertical loading machines. If the placement of plumbing in the bathroom is such that there is no place for the typewriter, try to enter it into the kitchen.

Cabinet Leon Credenza from Cantori.

Cabinets

The final stage. Storage furniture planned when the placement of plumbing in the bathroom is already thought out. So that the cabinets disrupt the integrity of the internal volume of the bathroom, it is better to put them on the wall where the door is. Then the incoming will see them last. In small bathrooms, the cabinets are better to use mounted (so as not to occupy the floor) and with the mirror doors (for the effect of expansion of space). To store powders and detergents can be equipped in a plumbing cabinet. If there are protrusions in the walls, think. Do not turn them into a niche for storage.

Comment in FB Comment in VK

The placement of furniture in the bathroom is definitely entirely dependent on your personal tastes and convenience. But still, if you are interested in compliance with ergonomics, and that the situation does not lose an attractive appearance for a long time, and anyone it could be used with maximum comfort - be sure to read the existing recommendations on the right equipment of the bathroom furniture.

The right approach to the arrangement of the bathroom space

The correct locations of the furniture in the bathroom require a preliminary preparatory process: before we take directly for the placement of the acquired kit, you must thoroughly think about where one or another piece of furniture will be more convenient to establish from the point of view and save space and convenience to use.

Professional designers advise to draw an exemplary drawing of furniture in the bathroom - such a visual layout will help you better understand how good the option will look in the finished form one or another. The advantages of a similar approach and are that you can pounce several drawings and choose from them the most optimal for the space of your bathroom.

In the question of how to put furniture in the bathroom, not only the moment of aesthetic, you must take into account the fact that all its items should be convenient to use, and they should not interfere with the cleaning process - after all, the order in the bathroom is necessary.

Economy space

Choosing the options for the placement of furniture in the bathroom, it is worth thinking about what - do you really need the space of such a small room to pick up massive cabinets, shower cabins, stands under natural stone? The room cluttered to the limit will not look attractive, what expensive furniture would not be installed in it. Therefore, thoroughly think about what furnishings are really needed, and from which you can refuse.

The placement of furniture in a small bathroom will become much easier if initially, when choosing a set, you will prefer the embedded options for cabinets or tumbers, as well as their angular varieties. Do not be afraid to experiment and occupy under the shelves for storing those places in the room, about which we usually forget everything - a wall surface above the washbasin, entrance doors and so on.

Do not miss the empty space under the bathroom - you can intend a special screen with a large number of spacious drawers.

Secrets of the correct placement of furniture in the bathroom

The bathroom is a room with special characteristics - humidity has always increased, and the air temperature varies sharply from low to high indicators. That is why furniture for the premises of this type is selected taking into account good moisture resistance and heat resistance of the base material. In addition, the situation for a long time retains its original attractive reason to be able to properly arrange. What are the professionals advise in this matter?

  • Ideally, all furnishings in which it is expected to store things must be at maximum removal from "wet zones" - washbasin, soul, bath. In the bathrooms with a large area, this recommendation will not be difficult - it is possible to initially divide the room on the "furniture" zone and sanitary-hygienic. But how to place furniture in the bathroom with minor dimensions?
  • Corner cabinets and cabinets can help out, which can be strengthened in the corner opposite from the bath and soul. Places such a furniture will take a little, and the right selected location will help protect her and its own, and put things from splashes and getting water. Little trick - Be sure to prefer such fuel models, in which there is no continuous adjoining of the bottom to the floor - cabinets and bedside tables on small legs. Such design helps to protect furniture from damage, and also greatly facilitates the cleaning procedure indoors - you do not have to move it every time to move items from place to place.
  • No furniture attributes are harvested closely to a washbasin, nor to the wall surface, nor to the bathroom - there is always a special air gap. It is needed in order for the basic material of the couch or the cabinet wet during operation and retained his initial attractive qualities for a long time. In this question, it is not necessary to hope for moisture-proof coverage - even the most resistant type of finishing over time loses a number of useful properties and furniture becomes vulnerable to moisture.
  • Hangers for towels and bathing gowns are to be attached to the places of reach, but still quite protected from moisture from entering out - otherwise, during the taking of the shower or bath, the fabric will burst. Most often, hangers under clothes and towels are strengthened at the entrance doors.

Important moment: Properly located furniture allows not only to save space and decorate the interior - it is safe to use. Furniture objects should not interfere with free movement in the room and, of course, their location should not be caused by household injuries. Hang the shelves and cabinets are needed at a sufficient height, so as not to fight your head, and sharp angles should always turn to the wall. Do not forget to carefully check the strength of all attachments, especially for hinged shelves and lockers.

Conclusion

The right approach to the placement of furniture Even in a small bathroom dimensions allows you to create not only the cozy interior and the atmosphere of comfort - you can easily share your bathroom on comfortable areas, separating the bath and soul with a small bedside table from the restroom.

Do not forget in the placement of furniture to use all the features of the planning - niche in the wall, for example, will be a great place for a wardrobe, washing machine, washbasin. Release a more meter under the furniture will help the original plumbing design - corner baths, suspended toilets.

How to optimally pick up furniture in the bathroom can be read by reference.

Repair in the bathroom is always associated with large financial costs that seriously undermine the family budget. The high cost of the decoration is explained by the complex microclimate of this room, requiring the use of special expensive materials, as well as the high complexity of installation work for plumbing equipment.

When money and strength are suitable for the end, wanting to save, many homeowners are asked the pire, how to install the bath with their own hands. In this article we will tell you how to properly prepare the bathroom to install and independently install the washing container.

Requirements for the room

To start the installation of plumbing equipment, you need to carefully prepare the room to work. The quality of the preparatory work depends on the correct installation and operation of the bath. By the time of delivery of a new tank for washing, the bathroom should be in the following condition:


Note! In the process of repairing the bathroom, it is important to comply with the correct order of performing technological operations. Installation is performed exclusively on the aligned and lined floor. But the walls of the walls need to be engaged only after connecting the plumbing equipment so that the minimum clearance remains between the wall and the container for washing.

Installation methods

Installation of the bath with your own hands is a responsible process of exhibiting on the necessary height and connecting tanks for washing to the sewer and plumbing system. Installation can be performed in different ways, depending on the size, shape and weight of the equipment. Experienced masters recommend using the following ways:


Note that the correctly selected method of installing the bath extends the service life of the product, provides comfort and safety when it is used. In addition, performing installation, you can improve the performance of the model, reducing the noise and thermal conductivity of the walls with the insulating material.

Installation sequence

The installation process of the bath consists of several stages: the accommodation of the instrument to the room, connecting to the sewage system, fixing the legs, the deposits of the building level, as well as compounds with the plumbing system. The complexity of the problem is the large weight of the washing tank, so performing the installation alone is quite difficult. Install the bath in the following order:


Important! The optimal height of the side of the bath, recommended by SNiP, is 60-65 cm, since the installation of tank for washing at this level causes less injury and inconvenience. And the minimum distance from the floor to the bottom of the bowl is sufficient to connect the siphon with overflow - 10-15 cm.

Check and seal joint

Installation of the bath with your own hands ends with checking the system functioning. For this, they include the flow of water, open the cranes and are observed for the work of the drain. All connections should be sealed, and water should quickly fall into the drain, self-leaving the tank. If everything works, then before using the device, it remains only to seal the mix between the bathroom and the wall. This is done as follows:


When installing steel models, you can handle the bottom or walls from the outer side by the mounting foam or can be caught with vibroimol to reduce the resonant ability, thermal conductivity of the material.

Video instruction

Having modern building materials and the latest plumbing, you can make impeccable repair by manifesting fantasy, skill and good taste. The larger the area of \u200b\u200bthe room, the easier it is to fulfill its design ideas.

Area of \u200b\u200b4 square meters. The meter will not call the roomy, but for the urban buildings of the last century this is quite acceptable size, then it was enough to install a bath and a wash basin to meet the needs of the owners. Today, the consumer is more demanding and in 4 squares tries to accommodate a shower cabin, a washing machine, a bidet, installation with the toilet and sink. Builders of the last century, hoping a hygienic room, did not even assume the sanitary capabilities of today.

How to accommodate everything?

Modern man appreciates comfort. In a small room, except the usual shell and bath, you need to accommodate at least a washing machine. The top of the design art is to establish as many items as possible on a limited area, without violating the harmony of things.

You can go to radical measures and combine the bathroom with a bathroom. For those whose option seems unacceptable, it is necessary to properly pick up the plumbing and put the useful area with each centimeter. Even more difficult to organize space, if 4 square meters. m Already combined toilet and bathroom.

4 m2 - a common option of bathrooms. Designers have developed certain techniques in the design of such premises.

  • At the initial stage, even before repair it is necessary to measure and make a sketch of the room. Mark the front door and supply of communications. Decide which plumbing is needed, mark it in the drawing. During repair work, it may be necessary to deepen into the wall, make a small niche for the bath can fit. Sometimes you have to transfer the places of plum, create zonal partitions.

  • If the room is square (2x2 m), the bath can be put anywhere. In rectangular rooms to put plumbing and furniture items, it is better to determine it under the wall of smaller sizes. For those who like to take a shower, it is worth considering the option with a shower, it is practical and takes less space.
  • Sometimes washbasin can be neglected, its functions will perform a bath. If the sink is needed, and it is badly placed, you can slightly drive it on the bath, or replace with miniature analogues.

  • Save meters will help toilet toleas, suspended.
  • For some interiors, the angular plumbing is well suited. This technique concerns furniture. You can hang over the bathroom into the angle to hang the shelf or shelves.

  • Classic receiving the location of the washing machine or the couch - under the washbasin.
  • In small bathrooms, it is necessary to maximize vertical places above the bathroom, a bed, sink, washing machine. They are filled with suspended furniture, shelves, mirrors, hooks for towels.
  • If there is a niche, it can be applied for open shelves or a closet. The design, made in the color of the overall finishing, is alive with the walls and will not reduce the space. Andresol over the door, on the contrary, distort the geometry of the room.
  • In some cases, for optimal interior layoff, you have to transfer the front door.

  • There are rules for visual saving space. One of them: getting rid of the little things. A lot of small objects are practically "eaten" free meters. Cosmetics, washing powders, washcloths, detergents should hide in shelves and couches, and not to take free spaces on the washing machine, bathing and sinking.
  • The thoughtful use of reflective surfaces can save the situation. The mirror above the bathroom over the wall visually will increase the room twice, especially if it is opposite the door.

Feature under the form

Bathrooms with an area of \u200b\u200b4 squares can differ significantly from each other. The difference significantly affects their fill in the plumbing and furniture objects. Square or rectangular rooms with a small difference in the walls of the walls are considered successful layouts. The interiors in the premises with irregular geometry are harder. You have to seek the baths of a peculiar configuration, apply the corner plumbing and custom furniture. Catastrophic can be considered narrow long rooms with an entrance door with a shortened side. The bath becomes opposite the door, and under two long walls it is difficult to put something not to the detriment of the passage.

On the rational arrangement of the situation significantly affects the entrance door, in some cases it has to be transferred.

In square rooms with shifted bed, the bath or shower cabin is installed at the opposite wall or in the corner diagonally. The sink and toilet are placed on the right and left side of the bath. With the central location of the door, the bath is installed on the right or left. The opposite part of the room may take the rest of the plumbing.

In a rectangular room with a side door, a bath or shower is mounted opposite the entrance, and under the long walls put a washing machine, sink, toilet. The central entrance makes it possible to locate the plumber rationally on both sides. For rectangular rooms, the bath is always better to put on the smaller side, it will give the opportunity to build the rest of the plumbing in full.

Select layout

Bathroom, having an area of \u200b\u200b4 square meters, is often combined with a toilet. In addition to the bathroom, washbasin and washing machine, you must put the toilet bowl. In the perfect version, it is better to divide these zones with a light partition. You can use as zoning by installing or wall of the shower.

Sometimes for convenience, the toilet is set to the angle.In particularly close cases, this helps not touch the walls. Having a square area of \u200b\u200bthe room, you can right from the door to lay a bath (it will take the entire wall), to the left of the input to install a washing machine. To the left side of the room is mounted toilet. The washbasin with a small tumbel and the mirror will take the wall opposite the door.

An example of unsuccessful layout layout is a narrow rectangle having an entrance from a shortened side. Opposite the door can be placed a small bath. To form a pass, the rest of the plumbing will have to be placed in one line. Such an environment will not add a room with a room, but will make it similar to the warehouse of things. Niche in the far left corner allowed the situation, the washbasin was installed in it, on the contrary, they put a washing machine under the right wall. Such a planning option is not combined with a bathroom.

The left wall of the door is covered by a bath. On the right is a washbasin with a roomy bed, behind which there is a lightweight drywall partition zoning bathroom. In this layout, there was no place for the washing machine.

The bathroom has the shape of a classic rectangle. The entrance divides the wall almost in half. On the left is installed an angular bath with a glass partition. The washing machine was taken to the right, and the walls in front of the door were sink and toilet. All plumbing has a conditionally combined smooth line, which improves the appearance of the room.

A room with a complex geometry: two walls make up an angle of 90 degrees, and the third at a large angle goes to the side. A varied selection of baths in the plumbing markets allows you to choose any non-standard model. This will not only solve the problem of the features of the room layout, but also will give the opportunity to purchase a bath with a large volume. The wall opposite the door occupies a sink with a spacious bed.

Narrow rectangular bathroom with shower. Opposite the door of the long wall, a washbasin with a tabletop and washing machine was put up.

Ergonomic secrets

The main tasks of ergonomics are safety, functionality and comfort. Ergonomic furniture and plumbing is better to have smooth, rounded shapes. Tile on the floor should not slide. It is necessary that the glass shower glasses are durable, they did not give fragments during damage.

The bathroom is so small that it is difficult to comply with all regulatory sizes. For example, it is not always possible to maintain a distance of 75 cm between all objects of furniture and plumbing (between the bidet and the toilet, parameters are allowed twice less).

From the bath to the sink requires a length of 30 cm.But sometimes because of the cramped, the washbasin literally "runs out" on the bath. In this case, you should make sure that there are no objects around which you can hit, leaning on the water, or hurt their elbow when you clean your teeth. Tubes, dressers, countertops should not exceed one meter in height. If the toilet is not hanging on the installation, the distance between it and the wall is 30-50 cm, and in front of the toilet - at least 50 cm.

Ergonomics laws must meet the psychophysical features of the host, and in the creation of the interior, it is literally all: color, finishing material, lighting.

Materials

Options for using materials for trimming the bathroom are not so much, it is necessary to use waterproof structures. For these purposes, tile is suitable, waterproof acrylic paint, plastic panels, stone.

For the floor, the tile is selected with a rough texture, such a surface is capable of minimizing sliding. The selected small pattern solvent the boundaries of the territory.

In the work on the walls you should avoid large ornaments or images of the decor. Mosaic, on the contrary, is welcome. To optically expand the walls, choose a horizontal pattern, vertical strips will help with low ceilings.

The room is more voluminous to make glossy surfaces, it should be considered when choosing a finishing material. The reflecting effect of the stretch ceiling will double the room twice.

Transparent partitions and zoning of the room with different types of materials will also create an illusion of space.

Color solutions

The tonality plays a big role in the visual expansion of the territory. Black color brings, and white - removes, visually moves the boundaries of space. Dark walls of a small room turn it into an oppressive box, from which you want to break out. Spacious and airiness are created by light tones: blue, cream, milk, gentle-lilac.

The hosts with an energetic character can dilute calm bright shades of the interior with bright, screaming accents.

Disadvantages of the room can be adjusted by combining contrasts. Light walls with a dark ceiling will give the volume of the room, but at the same time landed it. Dark walls with a bright ceiling stretched space, but will make it already.

For young bathrooms, the subject of minimalism is well suited. The lack of decor and trifles focuses on the overall styling of space, does not distract to small items. This area is characterized by black and white color scheme. By drawing up the design of a small room, it is worth a preference to white color, and to send black as auxiliary. The intelligent dosage of black will emphasize elegance, and the privilege of light will facilitate the interior.

Lighting

Bright light in combination with a light finishing material makes the room spacious and positive. In addition to the central lamp, several point sets. With low ceilings, you can send sofa around the perimeter of the room and do without a chandelier.

The main thing is not to create shadows. LED backlight equipped with suspension lockers, but it can be used in the ceiling design. This is an economical type of lamps resembling sunlight.

You should not forget about the humidity of the room and buy lighting devices with this feature.Only with very high ceilings can be afforded to a hanging chandelier, in other cases the lamps are better built into the ceiling. Using the backlit, you can select zones, such as shower or bathroom.

Compact accessories

For young bathrooms, the optimal option will be the use of installation. On a stable metal structure, you can fix the toilet and bidet on one side, washbasin - on the other. Installation is trimmed with plasterboard and is covered with tiles or other finishing material. Such a falseland separates the toilet from the bathroom. All vehicles and pipes are mounted in the installation, only plumbing remains in air, soaring in the air. This option looks spectacular. It is also easy to clean under attachment. If the zoning partition is not needed, the installation can be mounted into the wall.

Bath in 4 square meters. Meters is better to install rectangular long-length short wall.The triangular bath is well beaten with an angular toilet located diagonally. In rare cases, three angle use, connecting another angular sink. Such interior looks originally and effectively.

Many replace bath with shower cabins, it helps to save a little space. For those who love the bath and shower to take at the same time, there are showers. This design is styled by all sorts of comfort elements in the form of hydromassage, steaming, tropical rain, aromatherapy fixtures, and so on.

The competent design of the bathroom is extremely important, because the sanitary and hygienic node is a room that is obliged to have increased comfort. The bathroom layout depends on many factors such as the size and shape of the room, the number of people in the family. In addition, when creating the design of the bathroom design, building standards and recommendations, security standards should be taken into account.

The layout of the elements of the interior is able to visually both expand and reduce the space, change the proportions of the room, to make the interior or comfortable and functional or uncomfortable and ineffective.

The size of the sanitary and hygienic node affect:

  1. Location Plumbing, furniture and household equipment.
  2. Location of water supply systems.
  3. Selection of finishing materials. If the concepts are wall-mounted, then at the stage of creating a project project, you should think about the most successful way to hide them.

A wide range of modern plumbing and household equipment allows you to choose models that are suitable for any size of the bathroom. In addition, today, you can order the manufacture of plumbing on individual sizes.

You can plan the interior in one room using computer and online programs. Designing the bathroom taking into account the SNIP and guests will help the program for visualizing MagiCAD. Create a three-dimensional model and develop a design of a combined bathroom in online mode will be able to schedule Triton.

Locate key interior elements in the bathroom will help a competent drawing. The plan with an indication of all sizes will allow you to properly arrange elements in accordance with sanitary and hygienic standards.

In order for the plumbing layout to be comfortable, it is necessary to adhere to such recommendations:

  1. The length of the free space before the shower and the bath should be at least 700 mm, ideally 0.1 meters.
  2. The area in front of the toilet in length should be at least 600 mm, the sides should be left at 250 mm.
  3. Between the bidet and the toilet should be distant at least 350 mm.
  4. Before the sink should be left 700 mm free square.
  5. Comfortable sink should be located at a height of 600-800 mm, the mixer is 950 mm.
  6. The minimum width of the bathroom should be 700 mm, the shower cabin is 900 mm, the sinks are 600 mm, and the toilet bowl is 500 mm.

The alignment of plumbing in apartment buildings is governed by building standards and rules designed for the safe operation of communications. When planning a bathroom in a private house, standard standards and recommendations should be taken into account in order to improve comfort and practicality.

Design and layout of a small bathroom

Owners of urban apartments are often faced with the question of optimization and saving space. It is especially acute this question becomes in non-residential premises: kitchens, bathrooms, halls.

Planning a small hygienic room has such features:

  1. Plumbing should be located along its use.
  2. To accommodate personal hygiene tools, use hinged storage systems, hooks.
  3. Do not forget about the antleesoles and built-in niches that will help accommodate household chemicals and cosmetics.
  4. Save space will allow an angular shower cabin.
  5. The bathroom in the form of a drop will give the opportunity to free up the place under the bidet or a small toilet.

When planning a small sanitary and hygienic node, it should be taken into account where the door opens (in the room or out). In the first case, part of the useful area of \u200b\u200bthe room will be lost. A good solution will install sliding doors.

6 kV bathroom layout options. M.

The layout of the room is 6 square meters. M depends on the length of the walls, form of room and the number of corners in the room. In addition, the location of the plumbing also affects the location of the input opening (do not place the bidet and the toilet in front of the door).

When drawing up a room project, it is necessary to follow such recommendations:

  1. If the room has the appearance of an elongated rectangle, then the most acceptable placement of the bathroom placement in the far, deep corner, and the rest of the plumbing is on the wall with engineering communications.
  2. Non-standard layout of the sanitary and hygienic node may include both a bathtub and a shower. In this case, plumbing is located nearby, in the middle of the room, along one wall. Due to this, the separation of washbasin and toilet zones is achieved.
  3. If a sanitary and hygienic node in a private house with a window or an erker, then it is better to place a bathroom in front of the element. At the same time, if the room is on the first floor, you should take care of the presence of curtains or rolled curtains on the window.
  4. If the family is large, then the room you can organize a double sink. The design follows the wall with a bidet or toilet.

Working out the design of the sanitary and hygienic assembly independently, it will not be superfluous to prepare options with different layouts: it will give the opportunity to choose the most convenient and attractive project.

Planning a combined bathroom

Often, the owners of the apartments in Khrushchev buildings are thinking about redeeming the bathroom by making it the square more due to the non-residential premises adjacent to it or connect the shower with the toilet.

The dimensions of all premises in the apartment are regulated by the gtales and on the bottom, in accordance with which the layout and redevelopment of the rooms are performed. The decision on redevelopment should be coordinated with special instances, the main of which is BTP.

After redeveloping the bathroom, to increase the comfort of the room, you can transfer communications: pipes, today, are easily increasing with the help of building materials. Sink needed in the transfer. The most convenient location of the washbasin is considered between the bathroom and the toilet. The advantages of such a layout is that the most attractive element is a washbasin with a mirror visible immediately at the entrance to the bathroom.

You can position the plumbing in the corners of the room: such a solution will open free access to each element.

Bathroom design and layout (video)

It is convenient and attractive to place plumbing and furniture in both spacious and small sanitary and hygienic nodes. Bathrooms projects with detailed locations of interior elements can be created independently using programs for 2 and 3D visualization. The main thing is that the location of the main elements in the room corresponds to GOST and SNIPM: So the layout will be the most comfortable!