The walk-behind tractor is a very convenient device for working in small and medium-sized farms. It is especially convenient if there are many useful devices for it. One of these is a trailer. Indeed, due to such an addition to the walk-behind tractor, its capabilities, as well as efficiency, increase. As a result, the number of jobs that will be performed manually is immediately reduced.
First of all, a walk-behind tractor is necessary for processing land plots. However, a trailer and other accessories can make it even more practical. Moreover, the simplest model is easy to make and you can assemble it yourself. Such a device is suitable for any household.
Blueprints
Before you start building a trailer, you should carefully consider its purpose. This largely depends on the size of the device. At the same time, the parameters of the trailer must match a specific walk-behind tractor, so that they can be conveniently used together. According to the power of motoblocks, the following types of trailers are distinguished:
Motoblocks with a capacity of up to 5 liters. With. match well with trailers on the same axle. The body of such devices has a maximum size of 1 by 1.15 meters and is considered light. Medium trailers are suitable for walk-behind tractors with power from 5 to 10 hp. With. The dimensions of such devices can be 1 by 1.5 meters or 1.1 by 1.4 meters. They are designed to transport goods weighing from 300 to 500 kg.
For cultivators with a power of 10 hp. With. it is best to use a body with two axles. Its dimensions will be approximately 1.2 by 2 meters. In such a trailer, it will be possible to transport goods weighing up to 1 ton. These are considered heavy.
When the dimensions of the trailer are known, drawings or sketches of the device should be made. The best option if the design will be shown from different angles. It is also important to make marks with dimensions on the sketches and carefully show all existing nodes.
A simple trailer consists of the following basic units:
carrier, consisting of several parts;
strong frame;
comfortable body with a frame;
wheels of the right size.
The carrier includes such parts as a housing for the assembly responsible for turning, a drawbar from a pipe, a footboard frame, an emphasis from a pipe, ribs for stiffness, overhead parts in the form of strips. Parts are connected, as a rule, using a welding machine. The greatest load falls on the place where the drawbar is joined to the swivel. It is he who needs to be well strengthened using stiffeners.
The frame is most often made of steel, or rather, rods (pipes) with a diameter of at least 3 cm. Connections on the frame are made using welding, scarves, spars, supports at the corners, and a longitudinal hinge body. Each frame should include a number of features determined by the area where it will be used: for example, pits, mounds and more.
The body can be made of both metal and wood. It can be solid or made from rods.
It is worth considering when assembling it, for what purposes a trailer is needed and what kind of goods will most often be transported in it.
In order to make a wheel axle, you should use a steel rod. Its diameter should be approximately 3 cm and length approximately 1.07 m. These parameters are best suited and do not allow the wheels to protrude beyond the trailer body. As for the wheels, they are suitable for almost any technique. The main thing is that they fit the design in size.
When preparing, it is necessary to take into account that the scheme includes a number of subtleties. An important point is the presence of not only the main, but also auxiliary nodes. It is also important to choose in advance the method by which the knots will be fastened together.
Moreover, it must be taken into account that some connections must be special, since they are responsible for the rotation. It is equally important to consider whether the trailer will be equipped with parking supports and a tipper for quick unloading.
Materials and tools
To create a trailer for a walk-behind tractor with your own hands, you may need the following tools:
spanners;
hammer or sledgehammer;
ruler or measuring tape;
screwdriver;
sandpaper;
file;
electric saw.
welder;
"Bulgarian";
lathe;
Depending on what materials will be used for the future trailer, the tool kit may vary somewhat. However, most of them are indispensable when creating additional equipment for a walk-behind tractor.
First of all, when choosing materials, it is worth considering what the trailer body will be made of. The cheapest material for it is wood. For example, you can use boards with a thickness of about 0.2 cm. It should be borne in mind that they need to be reinforced at the corners with metal overlays. It is convenient to mount such a body using frames for supports made of timber and bolts.
Wooden trailers are best suited for transporting bagged goods. In this case, the sides of such a device will be non-folding. It is advisable before you finally choose what the body will be made of, calculate the load, and also estimate what cargo will be transported in it.
You can also make a body from sheets of metal, the thickness of which is from 1 mm. This material is the most versatile. It is quite easy to make it also durable with the help of a primer and painting.
The corrugated board is also suitable for the manufacture of a trailer. However, it must be borne in mind that this material needs additional stiffeners.
To make the wheel axle, you can use a steel rod about one meter long. This length will allow you to place the wheels on the homemade trailer most correctly. Also, the VAZ-2109 beam is suitable as an axis. A good option would be to use the entire rear axle, including the wheels.
As wheels, you can use wheels from any equipment. The only condition is that their size should correspond to the technique. For example, wheels from a cradle or Zhiguli are a good option for a trailer. You can also use wheels from garden equipment with a radius of 40.6-45.7 cm. Wheels from the Ant scooter would be a good option.
How to make a dump truck?
A dump trailer for a diesel walk-behind tractor will become an indispensable assistant in any household. It is very convenient to transport goods in it, which can be easily unloaded in a matter of seconds. It is quite easy to make such a design with your own hands.
Moreover, a home-made trailer can be even better, as it will be made in accordance with all the necessary requirements.
It is best to start making a trailer from the body, or rather, from its frame. Side boards can be welded from profile pipes. The entire frame is made of similar pipes. You can check the connections for squareness using a regular construction square.
It is worth noting that when welding, you first need to slightly “grab”. When it will be seen that everything is assembled correctly, it will be possible to weld more firmly. It is very good if the welds are ground using a grinder.
The tailgate is best made removable to make it even easier to unload cargo. For its fastening, ordinary door hinges are suitable, and for closing - latches
To make the trailer safe at night, you can stick reflective stickers on the tailgate.
On the front board, as well as the side boards, it is necessary to weld small pieces of pipe that will become racks for wooden or metal boards. The final stage is the sheathing of the frame with the selected material (wood or metal).
After that, you can make a drawbar from profile pipes. They must be firmly welded to the beam. The result is a triangular structure. Strengthen the structure in the corners with the help of scarves made of metal, the thickness of which will be at least 4 mm. A metal plate with a thickness of more than 8 mm must be welded in front under the towing device.
To make the trailer tipper, you should weld door hinges in the form of a droplet, which can be purchased at the store, to the beam, as well as the bottom struts.
To fix the body, you can use a regular door latch. It is attached by welding to a spacer, which is located between the pipes that make up the drawbar. You can also purchase a one-piece self-tipping assembly.
The latch should be inserted into the pipe cut and welded. This provides a strong connection. Opening occurs through a lever that can be attached to the seat. You can connect it to the latch using a regular wire.
It remains to attach the wheels with the axle. Practice has shown that it is best to take a ready-made axial structure immediately. Depending on the carrying capacity and dimensions, you can make a two- or four-wheeled trailer.
Stability is important for every trailer, to achieve this you can install a footboard in front of the front beam. It will allow the body to remain in a stable position even without a walk-behind tractor.
How can you make a two-axle trailer?
Single axle trailers are more common, but they have some disadvantages. In particular, this is their center of gravity. Indeed, in the event that the setting of the body is incorrect, then the load will be filled up. It can also lead to an increase in stress at the clutch site, which will eventually ruin it. This can be avoided by placing the center of gravity strictly above the axis.
You can remove this drawback, as well as increase the carrying capacity, using two-axle trailers. They consist of main blocks and assemblies, just like single axle models. Their only difference is four wheels and two axles. Moreover, the axles are made in the same way as in trailers with one axle.
In the garden or in the garden, a walk-behind tractor is one of the most useful things. With its help, you not only easily cultivate the land, but also transport a lot of necessary things: hay, fertilizers, potato crops, fuel ... But how can this be done if a standard walk-behind tractor does not have a trailer? There is a way out - a do-it-yourself cart for a walk-behind tractor is made (the drawings are given below) quite simply, and this will save a lot of money.
A simple do-it-yourself cart for a walk-behind tractor drawings
A trolley for a walk-behind tractor can carry a load of 400-450 kg plus the weight of the driver. She easily carries six or seven sacks of potatoes without reloading.
Drawing of a trolley for a walk-behind tractor
Description:
- 1 - bracket for attachments of a walk-behind tractor;
- 2 - console;
- 3 - carrier;
- 4 - footboard from the board s20;
- 5 - driver's seat from the board s20;
- 6 - frame;
- 7 - body from the board s20;
- 8 - support beam from a bar 50 × 50, 3 pcs.;
- 9 - bolt M8;
- 10 - thrust ring made of pipe st.58×4;
- 11 - a wheel from a motorized carriage, 2 pcs.
Carriage carrier structurally contains only a few parts, fastened together by welding. The most overloaded part will be the tongue-to-swivel interface. Therefore, in this place it is necessary to install additional stiffeners.
Trolley frame
It is made of a steel corner and scraps of pipes with a round and rectangular section. The whole structure looks somewhat intricate and has an excess margin of safety. It is designed for use on rough terrain and hence harsh operating conditions for the trolley.
Trolley frame for walk-behind tractor
- 1 - brace from the corner of st. L21 × 3;
- 2 - seat frame from the corner of st. L21 × 3;
- 3 - riser from a pipe st.50 × 25 × 4;
- 4 - seat posts from the corner st. L40 × 4;
- 5.14 - front struts from the pipe st.50 × 25;
- 6, 15 - longitudinal spars from the corner of st. L40 × 4;
- 7, 8 - wheel axle supports from the corner of st.L32×4;
- 9.16 - rear struts from the pipe st.50 × 25;
- 10 - reinforcing cross member from the corner of st. L40×4;
- 11 - longitudinal hinge body made of pipe st.58×4;
- 12 - wheel axle from a circle st.30 mm;
- 13.17 - transverse spars from the corner of st. L40 × 4;
- 18 - scarves (s4).
Who does not count on such large loads can take a simpler option.
trolley carrier
- 1 - housing of the swivel unit;
- 2 - drawbar from the pipe st. 49×3, L1820;
- 3 - frame of the footrest of the corner of st. L25 × 4;
- 4 - stop from pipe st.58×4;
- 5 - stiffener from sheet st.s4;
- 6 - overlay from a strip. 25 × 4.
The blank for the wheel axle is a steel circle with a diameter of 30 mm. With an axle length of about a meter, the wheels are under the body. The wheel axle with angular bearings and a gusset is welded to the spars and the body of the longitudinal hinge.
Body
It is knocked together from 20mm boards, on the corners of which steel corners are attached. The bogie body is attached to the frame through three strong support beams made of 50x50 timber.
wheels
They are taken from the motorized stroller together with the hub assembly. Both ends of the axle are sharpened to match the diameter of the hub bearings.
Hitch with walk-behind tractor
The coupling of the trolley and walk-behind tractor is provided by the console. Its upper part repeats the contour of the holder of the hiller, as it is fixed in the standard bracket of attachments of the walk-behind tractor. Around the lower part in the form of an axis, a rotary carrier assembly is fixed in two RUE-bearings. The space between RUPs is filled with grease and closed from the outside with anthers.
Under severe operating conditions of the trolley, its connection and the carrier must be articulated.
The drawbar is inserted inside the tubular body of the longitudinal hinge, it is fixed with a thrust ring. This design leads to the independence of the wheels of the cart from the wheels of the walk-behind tractor, which, when driving over bumps, greatly simplifies the control of the walk-behind tractor.
Knot swivel
1 - console,
2 - anthers,
3.6 - bearings 36206,
4 - body,
5 - spacer sleeve,
7 - remote bushing,
8 - washer,
9 - nut М20×2.5,
10 - oiler,
11 - drawbar.
The driver sits on a semi-rigid wooden seat cushion in front of the body. The driver's hands hold on to the levers of the walk-behind tractor, and with his feet he leans on the step made of wood in a frame from the corners on the drawbar.
Do-it-yourself trolley for a walk-behind tractor
The simplest trolley for a walk-behind tractor can easily carry loads weighing up to 400 kg.
Structural parts of the bogie
In any bogie, the following components can be conditionally distinguished: a driver's seat mounted on a welded frame, a central frame, the bogie itself with a body and wheels.
What material is the frame of the trolley made of?
The easiest way is to cook it from a channel and a corner, which you can buy at any building materials store. The frame is welded with the utmost care, as it must withstand the stress of driving over bumpy country roads.
Blank for wheel axle
For it, you can take a steel circle with a diameter of at least 30 mm. The axis is connected by welding with a longitudinal hinge and with corner supports. It is necessary to select the length of the axle so that the wheels are under the body.
How to make a trolley body
With your own hands, the body is most easily assembled from boards up to 20 mm thick, steel corners are installed at its corners. The boards are bolted to the frame. It is better to make the sides folding: it will be more convenient to unload large volumes of goods.
wheels
You can use them from any agricultural machinery. Wheels from a conventional sidecar from a motorcycle are quite suitable. The axle will need to be turned to fit the diameter of the bearings in the wheel hubs.
trailer hitch
It is made from any suitable piece of metal by drilling a hole in it in which the hitch can easily pass. It is desirable to make a swivel assembly from a bearing with a suitable diameter, fixing it as firmly as possible by welding.
Cart bottom
Of course, it can be made from edged boards. But a more durable bottom is best made from sheet metal with a preferred sheet thickness of two to three millimeters. Such a cart for a walk-behind tractor, which you yourself can make in two or three days, can last for several years and with little or no repair.
Do-it-yourself trolley for a walk-behind tractor video selection
One of the most useful things in the garden is a walk-behind tractor. In addition, it is useful in the garden. With its help, you can easily cultivate land, as well as transport some goods: straw, vegetables, fruits, equipment, and the like. However, without a trailer it will not be possible to do all of the above. In this case, it is appropriate to tell you how to make a trolley for a walk-behind tractor with your own hands. This is the best way to save money. Also, for study, the topic "", with useful photo and video materials, will be useful.
Drawings of homemade carts for walk-behind tractor
It is noteworthy that the made trolley will be able to carry a load weighing up to five hundred kilograms, as well as a driver. That's about seven full sacks of potatoes.
We present to your attention a drawing of the trolley:
1. Fastenings for suspended devices of the motor-block (brackets).
2. cantilever beam
3. carrier
4. Footrest (from board 20)
5. Driver's seat
6. Main frame
7. body part
8. Support beam made of timber
9. M8- bolt
10. Thrust ring made of pipe
11. Stroller wheel.
The carrier is designed to hold only a few parts of the cart. They are fastened together by welding. Obviously, the most loaded part is the drawbar interface, as well as the turning part. Therefore, it is necessary to install stiffeners in this part of the structure.
Frame
The frame can be assembled from steel corners and pipes of round and rectangular cross section. At first glance, the design is very complex and has a large margin of safety. But it is worth noting that the transport will be used in difficult conditions. Therefore, all questions regarding strength disappear.
Drawing and dimensions of the trolley frame for walk-behind tractor
1. Slope from a metal corner.
2. Driver's seat frame
3. Riser made of pipe
4. Racks of the driver's seat, made of corner.
5,14. Pipe front braces
6,15. Longitudinal spars from the corner
7,8. Supports for wheel axles.
9,16. Rear struts made of pipes
10. Crossbar for reinforcement, made from a corner
11. Longitudinal joint housing
12. Wheel axle
13,17. Cross spars
18. Scarves.
However, if the loads are not so large-scale, then simpler structural solutions can be chosen (see).
trolley carrier
The wheel axle is made of a steel round billet with a diameter of 30 millimeters. If the axle length is one meter, then the wheels will be located under the body. The axle of the wheels with corner bearings, as well as a scarf, is welded together with the side members, as well as the body of the longitudinal hinge.
Body - dimensions and main parts
The body of the trolley is made of boards 20 mm thick. At the corners of the boards you need to fix the corners of steel. With the help of three beams, the body is attached to the bogie frame itself. Beams consist of a bar 50 by 50.
wheels
Wheels for the trolley can be used from a motorized stroller. The hub comes assembled. The ends of the axle must be sharpened so that they match the diameter of the bearings.
Spepka with a walk-behind tractor
With the help of a cantilever beam, the trolley is connected to the walk-behind tractor. The upper part of the console is similar to the contour of the holder. It is mounted in the bracket of attachments of the walk-behind tractor.
When the trolley is operated in difficult conditions, it is necessary that its connection to the walk-behind tractor be articulated.
The drawbar must be inserted into the tubular body of the hinge. The drawbar is fixed with a retaining ring. With the help of this design, it is possible to achieve independence of the wheels of the cart from the wheels of the walk-behind tractor. When driving with a loaded cart, this allows you to better control the walk-behind tractor.
Swivel assembly - diagram
1. Console;
2. Anthers;
3.6 Bearings (36206);
4. Housing;
5. Spacer sleeve;
7. Remote bushing;
9. Nut M20*2.5;
10. Oiler;
The driver will sit on a cushion that has medium hardness, because it is made of wood. The driver's seat is in front of the body. Management is carried out from the trolley. The operator's hands hold the handle of the walk-behind tractor.
Trolley design
A trolley of any design has the following parts:
Place for the driver;
Trolley with a body;
What material is suitable for the manufacture of the trolley frame?
It is best to prepare a frame for a cart from corners and a channel. They can be bought in almost any building hypermarket or at the base. It is important to cook the frame very carefully. The design must withstand movement with loads on difficult sections of roads.
Blank for wheel axle
For the wheel axle, you can use steel circles that have a diameter of 30 millimeters. The axis is connected to the longitudinal hinge by means of welding. It is important to choose such an axle so that the wheels are located under the body.
How to make a trolley body
You can independently make a body for a cart from boards that have a thickness of 20 millimeters. Steel corners are attached to the corners of the boards. With their help, the body is bolted to the frame. The best option is folding sides. So it will be possible to easily remove loads, as well as stack them on a wagon.
Wheels - what will fit
In principle, wheels can be taken from any agricultural machinery. In addition, some craftsmen use wheels from motorcycle equipment, as well as from strollers. That's just the axis will have to be machined to the diameter of the bearings.
trailer hitch
The hitch can be made from any piece of metal. It is necessary to drill a hole in it, which will be used for the hitch. The swivel assembly must be used with a bearing. It is important to strengthen it as firmly as possible by welding.
Trolley bottom
The bottom of the trolley can even be made from edged boards. However, it is best to use 2mm steel. The result is a trailer for a walk-behind tractor that can serve for several years without service. All materials for manufacturing can be easily found in any hardware store. The tool is sure to be found in every home. Is that electric welding can be rented.
When making a trailer for a walk-behind tractor with your own hands, it is important to consider that every detail must be made as accurately as possible. The quality and durability of the product depends on this. You can get the job done in just a few days.
Video examples of making homemade carts
Detailed video instructions for making a homemade cart, showing what and how to do.
Another example of high quality craftsmanship.
Which can be used for any work: plow a garden, transfer crops, seedlings, and so on. In order to be able to transport even more contents on a walk-behind tractor, it is necessary to do the independent manufacture of a trailer for a walk-behind tractor.
So, first, let's look at how to make a simple walk-behind tractor with a trailer. You will need steel pipes, wheels, springs, a metal sheet, a five-channel channel, and fasteners. Of course, you need to have some tools, welding and be able to use all this.
The frame will be in the form of a one-piece structure. It will be installed on the wireframe. To do this, we make traverses from the corners. We make spars from pipes. They are connected by crossbars so that a lattice is obtained.
We weld the racks to the longitudinal pipes by welding. In the upper part, a harness from the corner will be installed. You can also make trailer sides that will recline. Using a duralumin sheet, we will create a platform. For boards, you can use thinner sheets.
To create a beam, you need to connect two channels. At one end there will be a wheel axle.
The resulting beam will be connected by springs to spars. The ends of the spring are put on the axle of the shackle. From rectangular pipes we will make a drawbar. If desired, the trailer can even be equipped with parking lights, headlights.
Homemade trailer for walk-behind tractor, video
And now we will tell you how to make a trailer with great functionality. It is worth saying that it is best to perform all work on the basis of pre-prepared drawings. Once the size of the trailer is determined, you can count the materials. This work is very important, because it will save a significant amount of money. Be sure to find a welding machine, since self-tapping screws alone will not be able to ensure the strength of the product.
Do-it-yourself trailer for a walk-behind tractor dimensions, drawing In order to create a solid frame, you will need profile corners. We also take rectangular pipes of square or rectangular section. In order to make a body, we use inch boards and racks.
Note that the structure being created will have one axis. Therefore, in order to properly distribute the load, it must be laid closer to the center of the axle, and not towards the drawbar. However, folding sides will not work. But with a strong desire, you can make folding sides.
The chassis is the main part in the trailer, which will be attached to the walk-behind tractor. In order not to think where to find wheels or how to make them, we simply buy ready-made wheels from other small equipment. To connect the walk-behind tractor and the trailer, a console is made. It is attached to the bracket of the hinged system. The drawbar is inserted into the tubular body, and secured with a thrust ring. This will allow you to easily manage the created equipment on all types of surfaces.
In front of the trailer on the walk-behind tractor, there is a seat on which the driver will sit, rest his feet on a specially made platform and guide the ride.
Watch the video: cargo trailer - do-it-yourself dump truck for a walk-behind tractor
Now, for some humor:
- How and when to harvest white cabbage in order to ...
Equipment such as a walk-behind tractor is an excellent helper when working in the field, garden, cottage or farm. To expand the capabilities of the equipment, you can attach a trailer to it and transport soil, garbage, crops, tools and other heavy or bulky goods. You can make a trailer for a walk-behind tractor with your own hands, spending only a few days on it. The result is an indispensable assistant that will facilitate further work.
Preparatory work
First of all you need to consider what size the trailer should be so that it fits a specific walk-behind tractor, and it is convenient to use it. After that, you will need to sketch a drawing or sketch of the trolley, on which to display the structure from different angles, put down all the dimensions and draw the nodes.
Trailer mechanisms
You need to think through everything to the smallest detail so that during the assembly of equipment there are no difficulties. To do this, you need to figure out:
Having dealt with all these questions, you can start preparing list of necessary materials and calculation of the approximate cost of the future trailer.
A simple trailer for the Neva walk-behind tractor
To start making a trolley with your own hands, you need to prepare the following materials and tools:
- duralumin sheet with a thickness of 2 mm;
- sheets of steel with a thickness of 0.8 mm;
- springs and wheels;
- steel pipes 25x25 and 60x30 mm;
- channel;
- fasteners;
- screwdriver;
- welding machine;
- jigsaw;
- grinder.
trailer frame will be one piece mounted on a frame lattice. For its manufacture, two traverses 25x25 mm must be made transverse and pipes 60x30 mm must be attached to them so that the result is a lattice.
To the finished grid welded two longitudinal pipes, on top of which a 25x25 mm harness is attached by welding. Sheets of steel, which are cut to the required dimensions and welded, will serve as the material for the sides.
The turn of the beam has come, for the manufacture of which two channels will be needed. The elements are inserted into each other, after which wheel axles are put on one of the ends of the resulting part.
The spar is connected with the help of springs, the end of which should be put on the axis of the beam and the axis of the earring. Then, the central part of the springs must be welded to the same beam with stepladders.
Lastly, do it yourself you need to make a drawbar from pipes 60x30 mm. They should be docked and, by welding, one part should be attached to the trailer, and the other to the side members.
A simple trailer for a walk-behind tractor is ready. I would like to note that experts recommend using a welding machine to connect its parts. Such a mount will allow you to operate the structure for a long time.
Do-it-yourself multifunctional trailer for a walk-behind tractor: stages of work, video instruction
Having decided on the dimensions and sketched out the drawing, how many should be calculated meters of rolled metal and how many channels will be needed to make a homemade trailer. This is necessary in order to protect yourself from unnecessary costs for the purchase of unnecessary parts and fasteners.
Required materials and tools:
- welding machine;
- steel corners 40x40 mm and 50x25 mm;
- a bar measuring 50x50 mm;
- boards 20 mm thick;
- cutting of pipes of round and rectangular section;
- wheels assembled with a hub.
future trailer will consist of four main nodes connected by welding.
Stages of work:
Trailer dump truck for walk-behind tractor is ready. Now you can attach the footrest and the driver's seat, from which the equipment will be controlled.
Homemade trailer for a walk-behind tractor from auto parts
Having drawn up a drawing in advance and having prepared the necessary materials and tools, you can assemble such a trailer with your own hands in 1-2 days.
For work you will need:
- front axle shafts from Zhiguli or Moskvich;
- channel 65 mm along the length of the body;
- corners 60x60 mm;
- two pipes 2 m long;
- one pipe 60x40 mm, 3-5 m long;
- welding machine.
The load-bearing part of the structure will be axle, which is made from a channel. Its length depends on the length of the future trailer. On both sides of the channel, axle shafts from the car are joined by welding. Profile pipes are installed from above:
To ensure structural strength and rigidity, from the front corners of the bogie profile corners or pipes should be stretched. Joints can be bolted or welded.
The frame for the trailer is ready. Now you can install a simple wooden body made by yourself, a seat and attach it to the drawbar.
After watching the video instructions and studying the article, you can understand that in order to make a trailer for a walk-behind tractor with your own hands, you do not need to be a designer or a mechanic. To implement the plan, you will need a drawing, the necessary tools, materials and a little desire and free time.