Classification of wooden doors

There are several classifications of wooden interroom doors on the following features:
• according to the coating materials;
• internal filling;
• by the method of fastening glass;
• by way of opening;
• by the number of sash;
• to fill the door leaf.

Consider each classification in more detail to understand what kind of doors exist. This will help you decide on the choice.

Types of doors based on coating

1. Veneered

Veneered doors are called, the base of which is a door leaf from an inexpensive breed of natural wood (for example, pine) with a thin layer of coating from a tree of a valuable rock.

Thanks to modern technologies, the thickness of the veneer is from 0.4 to 1 mm. The thin sheet of veneer is smoothly and without drops is pasted on the door leaf. The perfect coating creates the impression that the door is completely made of the valuable tree of the tree. It is this method of covering the door leaf applies Varadoor.

2. Laminated

Laminated is called doors, the basis of which is the door canvas from the inexpensive tree of wood (most often pine), covered on top of the laminate. The laminate is a plastic film that is painted and decorated so that simulates a variety of wood species. The basis of the laminate can be any material. This film is cheaper than a veneer due to the fact that it is less wear-resistant. In addition, veneer - natural and environmentally friendly material, unlike laminate.

Types of internal doors

1. From the array

The doors from the solid massif of the tree is a classic of the genre. Such doors can be fully made of valuable rock (cherry, oak, ash, beech) or from an inexpensive breed (for example, pines). Doors from the array are the most expensive.

2. Frame

Frame doors consist of a frame (it is made of wooden bars), covered with 2 sides with mdf overlays. Inside such a door are honeycombs from pressed cardboard. They fill the cavities, allowing the door to "breathe" and making it much easier by weight.

3. Shipping

Handling doors are the doors whose canvas consists of solid large glass and handling parts framing the glass on the right and left.

Types of doors according to the method of fastening glass

1. Overhead baguette

Bagent doors the glass is attached using a special rail to the Bagueta tree. This rail frames glass and china.

2. Insert in the door leaf

In these models, the glass is inserted and pasted into the doorway slot.

Types of doors by way opening

1. Swing

Swing doors are the most common doors that are most often used in residential areas. Such doors can be disappeared both in one and both sides. An important point - when choosing a hinged door, it is necessary to consider that you will have to leave free space for opening.

2. Sliding

Sliding doors can consist of one canvas - in this case, they are shifting, or of two sashs - in this case, they constitute a sliding design. The door canvases move parallel to the wall or ride into the wall cavity. Such doors can be attached on the lower or top guide, as well as immediately on both.

Varadoor doors can be both swing and sliding. The selection of this or that option directly depends on the fittings installed.

Types of doors in the number of sash

Depending on the number of door sashs there are single-section (single) and double-tested (bivalve). The width of the doorway determines the number of sash. As a rule, it is necessary to install an additional element for locking on bivalve or double-telny doors - a preliminary bar or scorehold.

Any door model from Varadoor can be ordered both in a single-handed and bivalve form.

Types of doors to fill the door leaf

1. Deaf

These doors, the design of which is completely made of wood, there are no glass inserts in them. Most often, the deaf doors are installed in bedrooms and bathrooms.

2. Glazed

These are doors, in the design of which there is glass. Inserting glass can be decorated and decorated with various ways. Such doors are often chosen for kitchens and living rooms. They visually expand the borders of the room and skip light perfectly.

Each door from Varadoor is represented in both deaf design and glass insert.

What does the door consist of?

Caring for door

Proper door care is needed not only to maintain its external beauty, but also to extend the life.

Door care products
Interior wooden door requires careful relationship. To preserve a good appearance of the door, use special wood care products. Today the market presents a large variety of detergents. But when buying, pay attention to the composition: there should be no acids, alkalis and solvents - from them the lacquer - the protective layer, which we cover wood, can deteriorate.

Clear the door is quite simple even without specialized funds. At home, you can make a "folk remedy" yourself. His recipe is simple: you need to mix tap water with alcohol in a ratio of 90% to 10%, respectively, and moisten a rag in it. After cleaning with a solution, remove the residual residues with a dry cloth from the surface of the door. And on the lacquer doors additionally apply polyrolol.

If there is no folk remedy at hand, you can wipe with dust door with a conventional damp cloth. Then you need to walk along the surface with a dry cloth to remove excess moisture - so there will be no divorce. Special attention is paid to the lower part of the door block. When carrying out a wet cleaning, this part suffers very much from moisture.

If you have glazed doors in your house, start cleaning from the glass from the glass. Wipe the glass with a damp cloth, then dry. After that, proceed to clean the door leaf.

Remember: even if the room is clean, you need to process the wooden door with a polyrolol at least once a year. Then the door will sparkle clean and look like new.

Tips for care
A tree is a living material, so you need to observe some operating conditions if you want the door to save its characteristics.

• Isolate door from moisture

Humidity in the room you need to try to maintain within 40-60%.

• Do not allow mechanical damage

If you notice scratch on the surface of the door, you can eliminate it yourself. To do this, moist the scratch with a damp cloth, then sand up with a shallow skin and polish wax. The defect will not be visible, and the crack will not expand.

If you are planning a repair in the apartment, take care of the doors: cover them with a cloth or film so that the dust and the construction trash do not hit the tree.

Do not put heaters next to the wooden door. From unnecessary heat, the tree can expand, and the door is deformed.

Every 2-3 years need to do small prophylaxis: lubricate loops and locks, re-adjust them.

If you take care of wooden doors and perform at least the most simple recommendations, they will serve you not one dozen years.

Glazing

When inserts from the stack are added to the array of the door, the door seems to "come to life". In any model we offer there is an option with glass.

The beauty of the tree we emphasize with the help of multi-layer glass - triplex or various glass processing techniques: fusing, stained glass, painting, engraving and sandblasting.

Varadoor has a division specializing in glass with glass. Any types of glass processing - from cutting to painting - we perform on our own factory, using only high-quality glass.

Figured glass cutting
The Varadoor glass cutting uses an automatic cutting table for straight and curly cutting of the Italian company Bavelloni. This machine allows you to load a sheet without interrupting the cutting cycle. It has a cutting of high complexity and accuracy. Any figures: from a square before oval, with minimal discrepancy in size - only 0.02 mm per meter. This machine is very accurate.

The machine consists of three elements:
1) Pyramid warehouse that allows you to work with four types of glass;
2) self-loading cutting table;
3) Table for breaking glass with levers for unloading.
Supplied glass is loaded on the pyramid-warehouse. The manipulator takes the sheets of glass and folds them on the cutting table. The process is automated so that no glass so that it does not scatter and does not break when unloading. Varadoor takes care of the preservation of each sheet. After the sheet acquired the desired shape, it moves to the operator to the operator from the table for cutting. There is extra pieces of extra pieces. After that it loads on the rack.

Varadoor uses special equipment to create a fake on the glass. Facet is a thin cut at an angle on the front side of the glass. If you wish, you can make it matte or ordinary, straight or figured, with the desired angle of inclination. Facet width - from 10 to 60 mm.

Glass with facard processing edge is often used in interiors of different styles. Fazet is a pretty simple procedure, but it gives the glass completeness and at the same time unobtrusively fits into any design.

Fusing is a sintering technique or fusing glass layers. It would seem glass - ordinary solid material. But it is worth bringing it to a certain temperature, it becomes flexible and pliable. As a result, glass takes any intricate forms and outlines, acquires relief.

This helps the machine - a special furnace for baking glass with a temperature of 800 ° C. In it, the master puts the carved billets with smooth rows. Under artificial heat, evenly distributed over the working surface, the glass is languishing for two hours.

The layers of glass are sintered to a homogeneous mass, they are literally compiled in each other. After that, squares are already obtained, covered with multi-colored granules, droplets, butt, leaves - all these are just some examples of fusing options that we decorate the doors.

You look at some products, and you do not believe that it is just glass.

Triplex is a multilayer glass. Between several layers of glass - special film. The color of the film can be any.

So that the glass does not hit the glass, the triplex is going on a special table in a perfectly clean room.

After all the layers of glass are sink and drying, they go to the colanterer. This is a crimping furnace, which "glues" layers under the action of temperature.

Glass is the main material for Triplex. But it can be added anything in it. Between two layers of glass, you can bake and fabric, metal plates and even polymers. All that will draw fantasy.

Triplex glass is obtained not only beautiful, but also incredibly durable. Break it is very difficult. With the fragments of glass do not scatter - they will hold the film.

Stitched
Stained glass is decorating technique with colored glass pieces. Once, a long time ago, stained glass products were used only for decorating palaces and temples. Now we can afford to decorate house stained glass windows.

There are several stained glass techniques. We make stained glass windows with a stained self-adhesive film. On glass-based designer creates a pattern on the template. (Pictures on white or black glasses are advised advantaged. Cuts pieces of self-adhesive film and fixes them on the desired fragments. So that there are no air bubbles in the figure, on its surface, the designer spends a roller several times. Then the extra pieces of the film are cut off, and the boundaries of the fragments are separated by the bones for the film. Golden or silver film, which resembles lead, is glued on them, like in classic stained glass. It turns out a stunning composition.

Stained glass windows are less than the soldiers, and the visual effect is not worse than in stained glass produced by traditional technology. You can use them to decorate doors, windows, ceilings and partitions.

Glass painting technique is truly jewelry. It requires not only designer thinking, but high excerpts and skill.

The outlines of the future drawing are applied on the glass. This is done on special equipment, in the program of which the layout of the future picture is laid. Then the designer manually fills the contours with special silicate paints of different colors, in accordance with the selected template. It turns out a real picture, which is based on the canvas, and glass.

And you can paint anything, be it flowers from a paradise garden or samurai. Any drawings acquire a different life on the glass. This technique allows you to create very fresh, colorful images that do not wash off and burn.

Engraving is the technique of applying inscriptions, drawing, clear angles and lines on the glass using special equipment - engraver or laser. Engraver scratches, the laser glass places.

Our production is used by engraver. The process is fully automated - the program is laid a program that reproduces the pattern by the template. The specialist only monitors the course of the process.

The tool produces up to 3,500 revolutions per hour. To the glass and the tool itself do not overheat, water is constantly fed - the optimal temperature conditions are created.

Modern engraving allows you to make a very clear and accurate image that will not be damaged by detergents and will not lose freshness with time.

Sandblasting glass is drawing a drawing using quartz sand. The surface of the glass is pre-processed: self-adhesive film is applied on the glass. Plots that need to be left intact is isolated; The contours of the future drawing, on the contrary, open.

Then the glass is placed in special equipment. There it is fixed on suction cups so that there are no extra movements and scratches. Quartz sand particles in a strong jet of compressed air make a matte or the entire surface of the glass, or leave patterns on not closed self-adhesive film with glass.

Installation of doors

Installing Interior Door -
The process is complex, requiring certain skill and accuracy. From how the installation will be made, it will depend on its operation. There are some points that you want to pay attention to, no matter, yourself you install the door or does the master.

Preparation for installation
When accepting a new door, check for all parts and components, as well as the condition of the door and boxes - it is important that there are no flaws on them.

The old door must be carefully dismantled without damaging the wall.

Working area should be prepared so that it is convenient to arrange the door horizontally.

Build door box
The installation process of the door starts from collecting and securing the door frame.

It is important to correctly measure the size of the opening and adjust the size of the door frame below it. At the bottom there should be a gap of 10 mm.

When assembling the box, the top bar and vertical risers are knocked down. They are drilled: vertical risers - in the center of the joint; The upper bar is in four places at a distance of about 6 mm from the edge.

It is important to install the door exactly perpendicular to the floor, as it affects the bee. With incorrect installation, the door will either constantly break down, or, on the contrary, constantly closed.

Corners of the box must be exactly 90 degrees, otherwise the door can not "fit out" in the doorway at all.

Installing Door

After the box is collected and fixed, the door is hung. Pay special attention to the choice of loops - buy them from proven manufacturers.

Varadoor advises using two detachable loops so that if necessary, you can remove the door without unscrewing the loops. In addition, such loops are usually equipped with bearings that make the door to the lungs, and this extends its service life.

When attaching the door leave the gaps along the entire length of 1.5 mm between the door clove and the box. The clearance is needed so that the door easily opened / closed. Due to fluctuations in temperature and humidity, the door can expand. Therefore, the gaps are less than 1.5 mm do not.

After the door hung, check, is it even closed. If smoothly, proceed to the next stage - sound insulation.

Soundproofing
To ensure sound and thermal insulation between the opening and the door frame apply a mounting foam. Before starting work, the door covered with a film so that garbage did not get it. The opening is wetted with water for better clutch. After that, the foam is applied by a thin layer around the perimeter. Normal consumption: 1 balloon on the door.

For foam to be fixed, it is left for 12-24 hours (during this time it will dry), and then remove the surplus.

Installation of trimming
Before installing platbands, they are customized in length. For this, the platband details are applied to the future place of installation. Then make markup and scolded at an angle of 45 degrees. Varadoor advises to observe the following sequence: the left side, top, right.

After that, the platbands are attached with glue or finish nails.

The platbands hide all possible errors that were when mounting the door, and significantly improve the external door frame, giving structures a finished look.

In this article, we described the main stages of mounting the door. Carefully treat the door installation process - its service life depends on it. The correctly installed door is the door for the century.

Furnitura

Furnitura is an important detail that gives the completion of the appearance of the door. It is able to stylishly emphasize the design of the door or, on the contrary, to embarrass from the concept of the model and thereby disrupt the specified style.

Despite the fact that the door is not able to function without fittings, it is believed to the secondary elements, but its importance should not be underestimated.

What is fittings?

Fittings - the design element of the door design, designed to improve its functionality and external decoration. Traditionally, door handles, hinges, eyes, lock wells and lining, closers and staps, chains and spiing planes include door handles.

Doorknobs

Handles when choosing, as a rule, pay increased attention. This is due to the fact that not only the functioning of the door depends on them, but also its appearance. There are two types of door handles - push and stationary.

Pressure
Pressure handle is installed in case the door has a lock with a falling latch. The door opens and closes by pressing the handle, which leads to the movement tongue (faleva latch).

A variety of pressure handles are noby- So-called handles balls. To change the position of the FALE latch, they must be rotated.

Stationary
Stationary handle can not be put into motion - turn or press. It is not connected with the door lock and is designed for the convenience of opening the door. This handle is installed directly on the door leaf.

Door hinges

Door hinges are fastening fittings, by which the door is connected to the box (frame). There are overhead, brand and hidden door hinges.

Overhead
Such loops are superimposed on the door leaf and the box and fasten with screws. There are right, left and universal overhead loops.

Scratched
Screw are screwed loops consisting of two parts, which are pins with threads. One part of such a loop is screwed into the door cloth, the other in the box. Depending on the weight of the door, models of tweeted loops with different number of pins are used.

Hidden
Hidden loops are invisible in the closed position of the door. Mounted hinges on the doorbell by cutting. The advantage is that the door having a hidden loop is capable of opening at 180 ° .

Closers and stoppers

The door closer is installed on the door if it is necessary for its smooth closing. This device automatically closes the door, which allows you to extend the operating time of the loops.

Stoppers - devices that are mounted on the door to protect the door leaf from shocks against the wall.

Spivenets

Door decogents are valves intended for fixing the door leaf. There are embedded and mortise studies.

Embedded
This is the most economical view. Built-in spinages are installed without drilling or milling operations in a special groove in the door canvase.

Currency
The most common option. Cutting stepbewings are used more often in interroom doors. Installed devices in the process of manufacturing the door.

Our company is not engaged in the manufacture of fittings, but the fittings of any manufacturer will fit the door of the Varadoor.

A business card of the house or apartment is the interroom door. That is why it is necessary to approach the choice of doors very responsibly. In appearance and the "character" doors can be judged about the taste and taste of the host.

How to save the door from damage and scratches

A lot of interior doors are written: how to choose, install, check their quality and much more. But almost every person who is going to change the interior doors, asks itself a question about what to do in case of damage to the door?

Cat and dog owners are particularly concerned about how to protect the doors from the teeth and claws of their four-legged favorites. Unfortunately, veneer and laminate are materials that can be damaged by sharp objects.

But it does not matter if damage appeared on the door! They can be eliminated by soft furniture wax. Experts recommend using the adjusting wax pencils of the Novorit brand, which manufactures Technocolor, as well as fixing colorless lacquer of the same manufacturer.

Wax pencils are designed for sealing dents, cracks and chips on laminated and wooden surfaces, as well as to ensure moisture resistance of the damaged surface. In the case of a small scratch, wax is applied rubbing. If damage is significantly, then applying is made by a spatula and an edge knife. Surplus wax are cut, and then the surface is thoroughly polished with a soft cloth, the felt is best.

If the damaged surface has a distinct structure of the tree, then on top of the wax on the covered plot, it is possible to apply the simulation of the pattern of a wooden surface.

For the rapid sealing of small scratches and cracks on laminated and wooden surfaces, you can also use the furniture locking varnish. Before use, it must be carefully shaken, and then apply several layers. After drying, after about 6-7 minutes, the excess can be removed with a wet fabric. The bottle with varnish needs to be stored tightly closed.

The most unpretentious materials are laminate and organitis. To care, they are enough to wipe the wet cloth. Behind the doors made of natural wood and veneer should be careed with a special polyroli. The use of a special wax makeup allows not only to clean the door, but also protects it from damage and eliminates small scratches.

Pros and cons of veneered doors

Doors from natural species of wood are valued at all times. They are characterized by high reliability, environmental friendliness, good quality and impeccable appearance.

But the processing of natural wood and the further manufacture of the door require a complex manufacturing process, which, accordingly, makes the cost of such doors quite high. Therefore, the buyers are very popular with veneered interior doors - an excellent option for price and quality ratios.

There are 2 species of such doors: from artificial veneer and natural.

• Artificial veneer is a special paper on which a pattern of wood texture is applied and impregnated with melamine resins. Externally, such a coating is very similar to real wood, but the service life and environmental friendliness is much inferior to natural material;
• Natural veneer is made of a thin cutting of wood with a thickness of 0.4 - 1 mm and about 15 cm wide. Natural veneer is stronger and more durable artificial, so this coating method uses Varadoor.

Advantages of veneered doors:

• Democratic price and excellent quality.
• Reliability and environmental friendliness.
• Resistance to temperature and humidity drops.
• The use of veneer makes it possible to produce doors of various colors and shades.
• Veneer tree has a unique drawing, so the texture is not repeated in any product.
• With mechanical damage, it is easily repaired.

The disadvantages of veneered doors include only the likelihood that the texture of the coating will be heterogeneous. However, with a professional and high-quality approach, this is possible to avoid this.

Door terminology

Language is the best mediator to establish friendship and consent.

Erasmus Rotterdamsky

So let's talk in the same language! We invite you to get acquainted with the list of terms that are most often used in the door industry and with which you may encounter when buying a door.

Hill - Parus with a shaped profile, which are used for the membership of the glazed part of the door and strengthen the glass. This element gives the strength of the entire design of the door leaf.

Door leaf - This is the main movable part of the door, which can be frame or panel design. In the frame canvase, the internal cavities are filled with a cellular filler, or MDF, chipboard, brushes from solid wood. The door can consist of one, two or more door cans. The door leaf is attached to the box with the help of loops or with the help of rollers on the sliding rail.

Door box - team framework, which is stationary installed in the doorway and serves to hitto the door cans. Cashbar and fair elements are attached to the box. The door box consists of 2 vertical racks and crossbars. It is manufactured from MDF, chipboard or wood array.

Decorative lining (false horses)- Overhead decorative profiles, gluing on the glass with an inner or outdoor side and forming a false, so-called false binding.

Dobor (Doblyar Planck) - a decorative element that serves to expand the door frame if it is already walls. Dimensions in width can be from 30 to 500 mm, in length, good is equal to the length of the platbands. Usually made from wood and slab materials covered with veneer or decorative film, very rarely occurs from the wood array.

Mold- a shaped profile on the edges framing glass or Filong.

Concubine - A wide plank framing the doorway and hiding the gap between the box and the wall. Tubes can be rounded, flat, curly, telescopic. Made from MDF and chipboard, less often from the wood array.

Straps - Bruks located around the perimeter of the door.

Groove - Reception, into which the protrusion of another object is inserted when bonding.

Loop- Mechanism, with which the door leaf is attached to the box. The loops are detachable and inappropriate, brand and attachments, visible and invisible, left and right. We are selected individually depending on the weight of the web and the door model.

Crossing - The element of the door leaf, which is located between the panel or glass and has a groove to consolidate them. The width of the crossbar on the body doors is 25mm.

Threshold- Special bar, located at the bottom of the doorway and employee to improve heat and sound insulation.

PETTER (festal plank, quarter) - The place of contact of the door leaf with the box. Performs the function of sound insulation. Mostly used with the seal.

Opening - Hole for doors in the walls or partitions.

Purchase (lighting light) - Maximum doorway size with a fully open door.

Laying - This is a relief profile rail attached to the surface of the door canvase and serving to "revive" the appearance of smooth surfaces. Also can strengthen the sealer or glass.

Mountains - Bruks that share the inner space of the canvas on the section for the further installation of glass or Fillinka. Also join the strapping.

Seals- elastic gaskets of tubular or more complex cross sections, reaching the entire perimeter of the door and protect against cold air, noise and moisture.

Filenka- selected by thin profiled frames, a plot of thin boards or plywood shield, which closes the clearance in the doorway frame.

Furnitura - Door elements (loops, locks, handles, limiters, etc.) that provide comfortable control of locking devices and perform a decorative function.

- Stained glass window or separate decorative element, obtained by sintering pieces of stained glass in special furnaces.

Tsarga - the main element of the door leaf frame, the hinged plank, which is attached to it. Distinguish the upper and lower calgument.

Veneer - Facing material in the form of thin wood sheets, obtained by planing of bars of valuable rocks (planed), or brushing short stealed logs from birch, alder, pines on machines (lucked). The sawn veneer is made of spruce, Siberian cedar, fir. It is the highest quality.

Strapboard (Baguette, Frame) - Intermediate frame element for fastening glass or twin to the strapping.

The search for a reliable entrance door may be difficult, since most often you have to solve the "price or quality" dilemma. The safety of not only the property, but also the owners of the premises depends on the right choice of design.

First, you need to decide on the door material. In the modern world, the tree will not provide due protection, so the choice is one - metal. Finishing is a matter of taste, but do not forget that the door will become a kind of "visiting card" of the dwelling. Examine the photo of the entrance doors so as not to guess with the appearance.

Secondly, the good door will provide sound and thermal insulation, which is especially relevant in the northern latitudes.

Construction of the entrance door

When selecting security characteristics, it is possible to focus on the principle "the more, the better," but it can lead to an unjustified increase in the price and weight of the structure. Also pay attention to the ratings of manufacturers of entrance doors in your price segment.

The door frame is performed by a solid, including threshold, or a P-shaped form without it. The design without a threshold provides a lower level of protection and is used in economy-class doors.

The metal part of cold-rolled steel is more expensive than hot rolled, but better: the design is durable, light and durable.

The door from the steel corner is the most budget option, however it is easily deformed. In a private house or entrance without intercom, this option is the last thing you should watch.

Square profile with installed rigidity ribs and steel sheet for not less than 2 mm will provide higher strength. This design can be installed in a private house.

The door leaf must be made of a sheet of steel with a thickness of more than 1.8 mm. The purchase of too thin doors is not in your interests, no matter how tempting the price: open it easier.

The high-quality door necessarily has vertical and horizontal stiffeners. The insulation is laid between them. The more ribs, the better, but it will affect the weight of the structure. They must be evenly distributed to ensure due reliability.

Loop

The choice is between overhead loops that are fastened outside, and internal mounted ones.

The first type must necessarily provide for anti-bolt rigels that prevent the removal of the door even with cut loops.

Hidden loops can not be cut or unscrewed and outside cannot be seen. Unfortunately, there is a chance of a wedge, and then even the owner of the apartment can not get home.

The loops of heavy, massive doors must have support bearings that facilitate opening and closing.

Locks

Significantly increases the reliability of using two locks of different designs of different designs: suvalden and cylinder. One of the advantages of the approach is in case of breakdowns of one lock, you can temporarily use the other. If possible, put an individually made lock.

When installing the entrance door, make sure that the Suwald Castle "crab" design is fixed - otherwise it can jam.

The cylinder lock should be additionally enhanced by an armored lining. If the design implies a junk from the inside - this is another layer of protection.

Important moment: locks should not be at each other closer than 25 cm to minimize the chances of simultaneously cutting them with grinding.

Seals

Perform heat and sound insulation, as well as protection against smells. The doors equipped with seals are more tightly adjacent to the arrival and quiet closed.

Rubber Not without reason is considered the best material: it is durable, worn, steady tolerate various influences. If necessary, the seal can be easily replaced by another. Fixation occurs on the adhesive strip.

Some magnetic seals are too much attracted, which may make it difficult to open the door.

In an apartment building, there is enough single layer, in the private protection from the cold you need at least two.

Insulation

Usually used foam, mounting foam and mineral wool. It should fit tightly to the ribs of rigidity and frame. The cavities of metal profiles are also insulated.

In a private house, polyurethane foam will cope with the role of the insulation, the basalt wool in the apartment. The foam is usually used in alliance with the mounting foam, which the encapsions arise are filled.

Price segment

Of course, not everyone on the pocket option, it will be completely satisfying all the requirements. We propose to figure out how to choose an entrance door in different price categories.

Economy

Budget models are usually Chinese production, but meet from the domestic manufacturer. The price varies within 7-10 thousand rubles.

The design provides one sheet of steel thick up to 1 mm with a thickness of the door web 6-7 cm. Stiffness edges do not include additional amplification. The finish is performed from MDF or plywood. They can provide an attractive appearance, but the safety of such a door is pretty doubtful.

Middle

The price can be 10-20 thousand rubles. Together with the cost of the design and quality of the design. The door of the middle segment is best performing a protective function.

Includes 2 sheets more than a thickness of more than a millimeter, most likely more than 8 cm. Additional seals are present and thermal insulation. Castles are equipped with protection against opening. Select the finish from a significantly larger options.

Upper

The next price segment includes doors worth from 20 to 30 thousand. They provide maximum safety and reliability. They can be called the best entrance doors in the apartment.

Castles on the doors get enhanced protection, there are anti-removable loops and additional ribs. With a thickness of the cloth 8-10 cm, steel sheets are used to 2 mm. There is necessarily a good noise and thermal insulation.

Elite

This category includes doors more expensive 30,000 and made by individual order. Their main difference from the door of the upper segment is a higher-quality finish made of natural wood or stone, the presence of forging.

This also includes armored doors, steel thickness in which can reach 5 mm. They will withstand even a strong blow.

Some models have the ability to control using the remote control.

Photo of entrance doors in the apartment

The door to the storeroom has two important features - to hide everything is stored in this room, and act as part of the decor of the room. The RMNT website decided to find out what could be the door to the storeroom, as owners can arrange them and additionally use ....

Input door protection classes

As the face of a private house or apartment entrance door, of course, should be beautiful, with high-quality external coating. However, buying the door to enter the house, the owners are primarily thinking about protection against robbers. The RMNT website decided to find out the doors with what degree of protection is best to choose ....

Choose a mosquito net on magnets

In the summer, when you want to open the door and let fresh air, insect protection goes to the fore. In fact, why do we need flies and annoying mosquitoes? The RMNT website will tell you about such a modern version of insect protection, like a mosquito net on magnets ....

Milling doors under the accessories: how to install the handles quickly and gently

If you make repair yourself and want to perfectly install interroom doors - buy the simplest hand mill. This tool significantly facilitates the process of the inserts of the door fittings and improves the quality of the work ....

Doorway without doors: decoration and decor

Not always the doorway do not really close the door. Often it is just a pass between private rooms, which, of course, needs finishing and decorating. The RMNT website decided to figure out what can be doorways without doors, as they can be protected and decorated ....

What affects the cost of interior door

The price problem worries anyone who plans to repair in the house. The RMNT website decided to figure out what exactly affects the cost of interior doors, because it is a sufficiently weighty item of expenses. We chose the five most important factors that can have a significant impact on the cost of the door ....

Proper installation of interroom doors: Preparation of the Outline, Installation of the box and cutting of accessories

Road installation services are sometimes expensive expensive. To save, use our instructions, thanks to which any home master can securely fix the door block, embed the locks with loops, to aesthetically arrange the adjuncing and ensure the long-term operation of the doors ....

Ambar door in the interior

The choice of interior door is not an easy task. It must fulfill the main function - to distinguish between space - and at the same time fit into the interior, decorating it. The RMNT website decided to show and tell you how to use the barn door inside the house. Perhaps this is exactly what you were looking for! ...

Lictery of the Lock of the Entrance Door: how to buy and replace with your own hands

Due to the compact key and a simple installation procedure, the cylinder locks have become the most common option for secret mechanisms. But only a few know how these devices work, the cheating differ from expensive and why the wrong replacement can serve as a hacking ....

According to the Orenburg store, the interdverer56.rf door is a special thing. Being a phenomenon of transition across the border, it binds the spaces of things. And two ways: unscrewing and locking the border. Inlet, the door opens access to other things, locating, she protects them from encroachment. This is its special, if not privileged, position in the system of things.

Interesting facts number 1:Automatic door "Tanaka" It opens automatically when someone comes to it, and the passage is located exactly such a form and size that a particular person can enter. Each of the horizontal sliding slats, which make up the door, is equipped with sensors that calculate the form of a person who wants to go through and repeat it.

Interesting facts number 2:The most beautiful is considered to be the Baptistery Baptistery Baptistery Gate of St. John the Baptist in the Italian Florence. The entrances were so skillfully finished that the Great Michelangelo called them the "gates of paradise." The architects of Andrea Pisano and Hiberti on the order of the merchants guild in 1425 did them at that time.

Interesting facts number 3:One of the most terrible doors in the world can be considered the door of the Cathedral of St. Nicholas, this cathedral is in Slovenia. In fact, all the doors of this cathedral are a bit acute, but this is especially. She is young enough, this door appeared in 1996 in honor of the visit to the Cathedral of Pope John Paul Second. According to the designer's design of the authors, the door must represent the diocese history.

Interesting facts number 4:Presumably the most protected on the planet door for residential premises is made in Colombia. This monster has the following characteristics: bulletproof, refractory, explosion-resistant, protection against metal cutters, 10 locks (pins of almost 2 cm wide), biometric locking system (first checked fingerprint, then blood test is taken in order to verify that the finger belongs to a living person) , the integration of the IP camera (if you wish, the photo of the visitor will be sent to you by email as soon as it clicks on the call).

By the way, it is well known that interior doors, in particular, the opening, are able to keep a person life at the time of earthquake or other natural action. So interior doors from Orenburg prove this axiom, the prices for interior doors in Orenburg can look at the official website.

Interesting facts number 5:In ancient Russia, the doors specially made low, that guests welcomed the owners who were sheltered.

Interesting facts number 6:All the well-known rule of behavior, when a man misses a woman in an open door has origins from ancient times. Sadly, but the fact: when people still lived in the caves, the man thus checked the safety of his housing, and suddenly the mammoth was scored or an enemy tribe covered. Here is the weak floor and I had to check the presence of danger on myself.

Interesting facts number 7:The philadelphian inventor Theophilus Van Kannel received the first patent on a rotating door in 1888. In New York, in state buildings, the speed of rotation of the doors should not, by law, exceed 15 revolutions per minute.

Interesting facts number 8:Gerono Alexandrian attributes the development of one of the earliest automatic doors systems, in the first century of our era. The system of balanced, steam scales opened the door of the temple when the priests were burned in the altar.

Interesting facts number 9:Doors in Ireland are very colorful. This is due to the fact that after the death of Queen Victoria, it was ordered to paint all the doors black in the sign of mourning. As a protest, the Irish, stained their doors in different colors.

Interesting facts number 10:January was named after the ancient Roman god of the door, Janus. God Janus was the Roman god of the beginning and end, transitions, gates, doors, and doorways. In his honor, the doors always opened in the house, the act welcoming not only guests, but God. Nevertheless, the Romans who have made something outstanding for the empire, for example, the heroes of the war, were honored to have the doors to open the outside.

Most often, the conversations about the door structures are reduced to the solution of the issue where it is profitable to buy interroom doors and what the color of the door cans will be best to harmonize with the interior.

The most ancient door fabric was discovered by archaeologists on the shore of Zurich Lake, his age is over five thousand years. The door was made of poplar and perfectly preserved to this day. Its height is only 153 cm, and the width is 88 cm.
The oldest acting doors are installed in England in Westminster Abbey. They were made from durable English oak at about 1030-1040. And today these doors guard the entrance to the storage of old archives.

The highest and most difficult

The world's highest doors are installed in the NASA building intended for the final assembly of spacecraft and carrier missiles. The height of the building itself is 160 m, and the height of the doors is almost 139 meters. Their opening or closure - the process is unprecedented, it takes 45 minutes.

The hardest door leaf weighs about 44 tons. It is also established in the United States, in the Livermore National Laboratory and blocks the entrance to the largest source of neutron synthesis.
But the most amazing fact is that even one person can move this door thanks to a unique design of the loops.

The most high-tech

Doors designed by Tanaka engineers do not open in the sense familiar to us. They automatically forms the opening in accordance with the figure of a person who passes through them. The Tanaka door canak consists of dozens of thin horizontal strips, which when approaching is diverted to the side, creating a passage. All over the perimeter of this high-tech door design, sensors are installed, which read the external parameters of the person.

Tanaka doors are embedded in the wall, so they do not require free space for work. And, in addition, they reduce heat loss, since they provide the minimum contact time with the external environment.
And although the product exists today only at the level of the concept, it is likely that the door structures in the future will look like this.

If you need to update the interior today, you can buy veneered interroom doors and install them on the sliding system. You can order such a construction with a turnkey installation in the online store of the Porta Prima factory.

The most unusual

One of the most non-standard door design is installed in the house of the American inventor of Benjamin Spring. It works on the principle of the camera shutter and is controlled by simply pressing the button.

And the German designer Tobias Frenzel announced the "Ping Pong doors". This is a real find for office workers!
The door leaf is attached to special loops, thanks to which it can take a horizontal position in a matter of seconds.
The grid is fixed on the door, so you can arrange a physical pause and fight with a colleague from the next room.

The most frightening

The most frightened door canvas can be seen by visiting the Cathedral of St. Nicholas in the Slovenian city of Ljubljana.
According to the designs of their creators, only the plots of the history of the diocese are depicted on the doors, but they are the most terrible impression!