How to clean the duty area of \u200b\u200bthe pipe. Ways to clean stools in the bathroom

Sewer systems are equally clogged both in private homes and apartment buildings. On the inside of the pipes, soapfile, fatty sediments and other rubbish, which prevents the passage of water. Therefore, it is important to have an idea of \u200b\u200bhow to clear the bed in the bathroom or in the kitchen, as well as how to minimize the risk of such a problem in the future.

Pipes can be clogged for a number of reasons:

• errors at the stage of laying sewer system. With insufficient slope of the pipe, garbage lumps will be formed on an ongoing basis. At the same time, the solution to the problem is to fully replace the sewerage;
• long exploitation of pipes - even made of high-quality materials Plumbing products with time begins to cope with their functions worse, the pipes are loosened, and their inner surface is covered with various growths;
• the primary choice of materials - so, on cast-iron deposits pipes will be formed faster than on plastic analogues;
• falling through the draining of foreign objects;
• lack of either insufficient home sewer care.

Hair is the main reason for the stuff in the pipes.

What causes a blockage in the pipes

Methods cleaning

If the pipe clogged, you can use one of the proposed methods:

• thermal - on the zoom act on the head of hot water;
• chemical - the formed plugs are dissolved by special means;
• mechanical - the garbage is eliminated by means of a plumbing cable or siphon disassembly;
• cleaning pressure - Classic Vanatuz applies.

This or that method is chosen taking into account the materials from which pipes are made. Thus, plastic products may be damaged by a cable or boiling water, and the use of chemicals should be carried out with strict compliance with the manufacturer's recommendations.

Vanutuz remains popular, affordable and simple when using the means when it comes to deal with how to clear the blockage in the bathroom, sink or toilet. The device has a form of a handle (wooden or plastic), one side of which is supplemented with a rubber nozzle. The principle of operation of the Vanza is that under the influence of strong pressure, the resulting garbage starts to collapse and move along the pipe. Often, waste fluently go out and easily removed.

But even such a simple device must be used correctly:

• if the pipeline is supplemented with a overflowing hole, it is recommended to close it tightly (the rag is suitable or the cover), while the pressure on the formed plug will be reduced;
• the rubber part of the vehicle is tightly pressed to the drain hole, after which there are progressive rhythmic movements. In this case, the rubber element does not break off from the surface of the sink;
• a sharp movement of Vanutuz is separated from the drain.

Score cleaning equipment by Vatuz

When working on a clouded plum, it is important that the water level in the bathroom or sink exceeded the height of the rubber valve. The repetition of the procedure will make it possible to achieve the best result and completely eliminate the stagnant water.

Means of household chemicals

When garbage crashed in the pipe, various chemical means will help to cope quickly and effectively. Their use is good because there is no need for any physical effort - the active substance of the drug will independently remove the existing problem.

Such means have a different consistency: a liquid, powdery, gel or foam. The principle of their use is easily simple: the manufacturer recommended by the manufacturer the scope of the cleaning agent is poured or falling asleep in the drain and leave for the time specified on the label. After the deadline expires, they include water, which will ensure a thorough flushing of pipes.

The use of any chemical preparations requires special attention. It is not allowed to enter the skin or mucous membranes (work is carried out in protective gloves). In addition, it is undesirable to enter the funds on the chrome surface.

You should not wait for the moment when the pipes begin to clog, because such chemistry is excellent for preventive purposes: a small amount of chemical gel or liquid is poured into a drain hole literally for several minutes, after which it is thoroughly washed with hot water.

Chemicals

Folk remedies

Folk remedies are also good when dealing with clean sewer pipes. Such a procedure for eliminating blockages is environmentally friendly, simple execution and does not require financial spending, since the main active substance is the usual soda.

Folk remedies

Work is performed according to such a scheme:

• soda and table vinegar take in the same amount (no more than one glass of each means);
• in the drain hole, first pour out the soda, on top of which vinegar is poured;
• drain is closed with a plug and leave about 3 hours;
• after this time, the pipes are thoroughly washed with boiling water.

An effective folk agent is fragrant lemon. To eliminate contaminants in the pipe, they take several large citruses and squeeze them into the drain hole (the main thing is that the bones do not get there). The exposure time on the accumulated garbage is at least one hour, after which you can start using a sink or bathroom.

Initially, the soda falls asleep in the drain, and then vinegar poured

Cleaning siphon

To cope with the problem, how to eliminate the blockage, is often sufficient to clean the siphon. With this procedure, the procedure will be as follows:

• the floor under the siphon is covered with a rag that absorbs water well. So that the subsequent cleaning of the room did not take much time, it is better to arrange under a sink bowl where dirty water will merge;
• after the gate nut is unscrewed, the flask is neatly removed. After removing the flask in the well-substituted bowl of the bowl of water, which previously performed the function of the hydraulic assembly;
• then the closed siphon is thoroughly washed with water, and the walls are removed from its walls (a chemical agent is used);
• after completion of the procedure, the design is going to anew. It is important to ensure that the flow of the runoff does not focus on the flask of the siphon, since it will violate the hydraulic machine;
• to check the tightness of the compounds, it is enough to include a strong water pressure.

Siphon cleaning instructions

Such cleaning will be useful as preventive measures. The washing of the siphon is not more often once every 2-3 months, it will minimize the appearance on its inner walls of a milder plate, which causes an unpleasant smell in the room.

With boiling water

If the zoom in the sink gave an unexpected about himself, when there is simply no time to eliminate it, it is possible to use a simple and often effective way to clean the pipes with boiling water. The efficiency of the method lies in the fact that, under the influence of high temperatures, fat will dissolve, which is often the cause of most blockages.

To begin, it is necessary to determine the scale of the problem: if the water accumulated in one place (let's say, in the washbasin), then such a zoom to wear a local character, and when water is in all plums, such a block is considered global. At the same time, the solution to the problem is to clean all sewage paths, whereas with local pollution, it is enough to clean one pipe.

Boiling water is allowed to apply only under the condition that the plumbing system is made using metal pipes. The principle of action is most simple: heated to 4 liters of water and pour it into the drain. If necessary, cleaning is repeated. To achieve the maximum effect, you can use the hero or vanatoux.

From boiling water is better to refuse if the water is going on the surface of the sink or bath and does not leave. It is important to remember that boiling water in this case simply will not affect the problematic place. In addition, it is necessary to be neat when using a vehicle, so as not to injure the skin with hot splashes. For plastic pipes, the water is suitable (but not boiling) water into which the washing powder is administered in the proportion of 200 g of the mixture on 5 liters of water. The resulting solution is gradually poured into a closed pipe.

Using cable

Accuated deep in the pipes garbage is unlikely to be able to remove with chemicals, boiling water or vanza. Then you can resort for help to the plumbing cable. Such a cable has the form of a thick twisted wire, one side of which is supplemented by a brown, and the other is a handle. The length of the cable is no more than 10 meters, which is enough to remove the blockage in the bathroom apartment or private house. It must be remembered that such a device is suitable for combating pollution of metal pipes.

Types of tapes

To clean the drain of a plumbing cable, follow the following recommendations:

• first of all, the sewer pipe is disconnected from the siphon, after which the end of the wire is neatly introduced into the drain hole. If you have to deal with a modern sewer system, which is supplemented with special fittings for pipe cleaning, the siphon is left untouched;
• that the cleaning process was as efficient as possible, it will take 2 people to perform it - one of them will be responsible for the correct direction of the cable, and the second will be directly cleaned by the closed pipe;
• when the location of the contamination is detected, the plot punch with the cable with neat push movements;
• after that, the wire is removed, the pipe (if necessary) is collected and is thoroughly washed with hot water.

If during cleaning the cable is stuck in the pipe, it needs to slowly rotate to the side until it is possible to cope with the obstacle. The sanitary cable remains an effective solution to the problem of how to remove the blockage formed at the depth of pipes on its own in a short time.

Cleaning scheme

Preventive measures

How often do we clean siphon or process pipes from the plaque? In order not to wait for the moment when the pipes of your apartment or home will be abandoned, you should follow simple advice to prevent such a problem:

• each drain hole should be closed by a protective grid, due to which the minimum amount of waste will fall into the pipes;
• once a few months, we process home sewer with appropriate chemicals, which will be able to dissolve the accumulated garbage, not allowing it to form traffic jams and impassable blockages;
• an excellent substitute for this means is the washing powder. Once in 3 months, the drain holes of the bathroom and kitchen are closed, after which several staps of washing powder fall asleep, turn on hot water and remove the plugs;
• to wash in the kitchen served properly, it is enough to periodically wash her pipe with hot water 1-2 minutes;
• after each sheep washed or taking the soul, the plum lattice in the bath is recommended to clean from the accumulated hair;
• do not forget about the cleaning of the siphon, which will allow not to give pipes to clog.

Such simple actions do not allow the dirt to accumulate on the inner surface of the pipes, therefore, it will not be worried about the clouds. Especially if you know how to eliminate zoom in the bathroom.

Video

Vomor in the pipe, namely in the bath or sink - a very unpleasant phenomenon that brings strong discomfort. Drain clogs, bandwidth is reduced, and water does not leave. In addition, soon a disgusting smell appears, the threat of flooding of rooms or a breakthrough of the pipe.

To avoid this, it is important to eliminate the blockage in the first stages of appearance. As soon as you noticed that the water began to leave longer than the usual, it is possible to conduct a procedure. In this article we learn how to clear the bedroom in the bathroom or in the kitchen at home.

Causes of blockage

The cause of blockages is that hair, small garbage, animal wool, rollers and threads from clothing, soap, and much more fall into the pipe and drain. These components form a dense lump, which prevents water passage. To clean the pipe, you need to remove this garbage. In this case, you can eliminate the block in the bathroom at home.

In old metal pipes, mineral growth is formed over time. In this case, cleaning can only hold an expert.

But such a problem is rarely found and mainly in old houses, where cast iron and steel pipes were used. The modern pipeline is made mainly of polypropylene, plastic and PVCH, which is not subject to corrosion and formation of deposits on the walls of products.

The reasons may also become an incorrect laying of sewage and insufficient pipe slope, long-term use of pipelines and device wear. In this case, it is necessary to replace old pipes, wiring and risers, siphon and other elements or eliminate defects allowed when installing sewage.

However, most often the cause of problems becomes the accumulation of garbage in the pipes to be eliminated. Let's find out how to do it.

How to Clean Votor Vanatuz or Cable

Cleaning by Vanatuz is the most common way that is used to eliminate blockages. Vanutuz has a dual pressure on the blockage, as a result of which garbage inside the pipe is destroyed. Before the procedure, close the overflow hole, if there is.

Then press the rubber part of the vehicle to the drain hole, push the device and start sharp intense movements up-down. See so that in the process of water in the sink or bath does not rise above the rubber valve. Then they sharply tear the vanatuz and repeat the procedure several times.

To ensure a more dense adjacent to the plum to the plum, you can pre-lubricate the bodie of the device with vaseline. If removed dirt and the garbage completely failed, the drain is cleansed with vanatuz and boiling water.

To do this, fill in a third of the shells or baths with hot water. Then we insert the vehicle and pump the tube in the bathroom, we dramatically pull and repeat the procedure several times until the drain is completely cleaned.

Instead of a vehicle, you can use a vacuum cleaner with a function of blowing air. The pipe of the appliance is attached to the blowing hole, and the remaining end is wrapped with a cloth or soft material. This end is inserted into the drain hole and include a vacuum cleaner.

Pressure with air will push or destroy the blockage. By the way, the function of blowing air can also be top clothes after washing.

Strong, deep and serious blockage will help eliminate the cable for pipe cleaning. The procedure must be taken carefully and carefully, otherwise you can damage plastic pipes. To clean the zoom in the bathroom with a cable, first remove the siphon.

Then take the device by the handle, and the other end direct into the pipe. Push the cable as you fine, and start turning the cable clockwise.

When the cable comes to the gap, strengthen and speed the rotation of the cable. He will push the garbage further. By eliminating the main part of the blocks, pull out the product with the remnant of pollution. Rotate the cable only clockwise, otherwise it can break!

By the way, you can easily make a cable yourself. To do this, take a flexible metal wire, on the one hand wound the fabric and make a handle. The other end bend in the form of a small hook.

Chemicals for cleaning

Today in the shops and household chemicals departments you will find various means to clean pipes and blocks in the bathroom or sink. These are gels, powders, liquids and foams. Choose compounds that dissolve hair well and are suitable for your type of pipes.

By the way, many funds are used not only for cleaning, but also for preventing blocks. We offer an overview of the most popular drugs.

• Mole is the cheapest and affordable. It eliminates breaks and unpleasant smell effectively, but slowly, acts from 1.5 hours;
• Sanoks - also an inexpensive drug that is suitable for each type of pipes. Delicately eliminates breaks and unpleasant smell, acts from one hour. It has a lid-blocker "from children";
• Chirton is a cheap tool with a rapid action of 15-20 minutes. Does not forms dust and does not contain chlorine, but has a caustic smell. Produced in the form of a gel and powder;
• Tiret is a popular preparation for plastic and metal pipes that characterize high cost and average efficiency. The time of action is before half an hour;
• Deboucher is an effective gel in a comfortable package with a blocking lid, suitable for plastic and polypropylene. Due to chlorine content, it is impossible to use for aluminum pipes. Acts within an hour;
• Flu is an aggressive granulated agent with high efficiency without a sharp smell. Distinguishes light and prompt cleaning of blockages;
• Baga Pothana is expensive, but the high-speed agent in granules, which is valid instantly in 3-5 minutes. It characterizes high efficiency, economical consumption and convenient packaging. Not suitable for worn pipes and to prevent blocks.

Most chemical compounds have a caustic odor and aggressive action, so it is recommended to clean the pipes using the means of protection. Be sure to wear gloves, if necessary, a respirator and eye protection. Cleaning the cleaning procedure strictly according to the instructions and store the tool away from children.

Folk methods cleaning

1. Light pollution removes lemon. To do this, take one fruit and squeeze lemon juice into the drain hole. Two hours, rinse the bath or shell with hot water;
2. Fat and minor contamination in pipes are removed with boiling water. Leyte boiling water in the drain until the water starts to pass;
3. Effective and effective cleaning with soda and vinegar. Two components, when entering into the reaction, each other quickly eliminate complex contaminants. First, a glass of soda is covered in the drain, and then pour a glass of vinegar and plug the hole with a plug for 20-30 minutes. After that, the pipe is washed with boiling water;
4. Clean the blockage is not only soda and vinegar, but also one soda. The soda purifies and disinfects the pipes by alkaline media formation. First, fill in the breakdown liter of boiling water and after 15 minutes you will clean the vehicle. Remove the dirt and pour the glass of soda into the hole, pour three more glasses of boiling water. If necessary, repeat the procedure;
5. The use of salt and soda is another way to clean the blockage in the bathroom. To do this, at half past one component, pour into the hole, pour boiling water. Leave for 8 hours, periodically pouring new boiling water. Then the bath or shell rinse with hot water.

It is important to clean the drain from the hair regularly. After each wash wash, you must collect and remove the hair. Properly use the plumbing so that the bath or sink is not clogged!

Do not clean vegetables in the kitchen sink, as waste is easily and in a short time clog the drain hole. Do not comb your animals in the bathroom and do not wash off the wool, threads into the plum hole. Do not wash your shoes directly in the bathroom, as the dirt and sand also clog the pipe.

To prevent blocks, it is recommended to sometimes pour boiling water into the drain hole, as it reliably eliminates soap and fat. Clean the siphon regularly. To do this, substitute basic, bucket or other container under the pipe. Open the fasteners and remove the flask. Wait until the water stalks, and carefully clean the siphon with a soft cloth and water. Then put the device back.

Frequently often people are encountered with clouds in the pipes. This problem is common worldwide. In order to fix it and return the sewer system to the existence performance, it is necessary, as soon as possible, eliminate the resulting problem. If you slow down, then in the future it can be formed before buming an unpleasant rotten smell, from which it is difficult to get rid of. You can eliminate the blockage yourself, or with the help of a plumbing master. But it should be borne in mind that nowadays the services of such a specialist will have a high cost, therefore it becomes the most optimal option - cleaning the pipes with their own hands.

What contributes to the clogging of pipes?

In order to pollute the pipes there are only five reasons, namely:

1. Errors were made during installation or not complied with the rules of installation (for example, a pipe has an incorrect bias or a cement solution was used in operation).

2. Foreign body, which is stuck inside the pipe.

3. In the consequence of long-term use of pipes, without proper cleaning, a rather thick layer of scale was formed.

4. Due to the washing of dishes, various contaminants enter the pipes and form a fatty tube, which prevents the water flow normally.

5. Pipes were deprived of the necessary care, or he was carried out wrong.

Despite the fact that the reasons served as a mustor, it needs to be urgently eliminated. You can clean both metal and plastic pipes.

Three simple ways with a slight block

Often, people wonder how to eliminate the blockage in the pipes without resorting to heavy methods. And it is really possible, but only in the case when the plug that occurred due to contamination is not too large and not very dense. If the so-called "first aid" can eliminate the blockage, then the subsequent methods described in the article will not be required.

1. First of all, it is necessary to pour hot water into the drain hole, practically boiling water (if the pipes are made of plastic, then simply turn on the tap at the highest temperature and leave for 25 minutes). The plug that is not tightly still falling, can merge into the sewer. If the 1st method did not help, go to the next.

2. When the reason for the blockage lies in the frozen fat, then it will be necessary to apply salt and soda. In the vessel mix half a glass of salt, one glass of soda and as much water. Next, the resulting solution is poured into the drain hole. We wait for when it takes 7-12 minutes, and we begin to "work" by Vanutuz. We wash the pipe with running water with a running water.

3. This method is suitable for the owners of vacuum cleaners with built-in F-Qiyia. If you are one of those lucky ones, then follow these steps: Wrap using a rag of a vacuum cleaner. It is necessary that it is possible to be tightly installed in the drain hole. Powerful air flow simply pours out stagnation.

If none of the ways helped solve the problem, it means that it was formed a dense, large and already old cork. But do not despair, there are methods for eliminating blockages in pipes that will help even in the worst cases.

Mechanical Pipe Cleaning Method

With mechanical cleaning of pipes, deposits in the plumbing pipes are shifted, which allows the flow of water to function normally. When removing the breakdown, the main tool will be the main tool. It is necessary to firmly press the drain hole in the shell with a scaled water and pressed. Due to what pipes are cleaned? Everything is extremely simple, a hydraulic pillar is formed, it actuates on a plug, contributes to its breakdown into small pieces that are freely carried by the flow of water. Using a vanza is an easy and cheap way to troubleshoot.

Recommendation: In the case when a person owns a two-section washing, when cleaning it will need to simultaneously use 2 vents. While with the help of the first cleaner, the pipes in one sink, the second is closed with another drain hole. Due to such actions, a great suction force is created. In the absence of a 2nd vanza, the drain in another compartment of the sink should be closed using a wet cloth, or, as a last resort, hands.

Also, you can use the services of a special plumbing cable. This tool is made of durable steel, equipped with a comfortable handle, and a spiral is located on the other side, or some have on the end of the jarshik. Design Put in the pipe and just scroll. The direction of movements does not affect the result (from itself - the block is pushed into the sewer, and moving on itself - the plug is pulled out). During cleaning, you should not forget to feed water so that the flowing water was washed up pollution. Consider that this method is more suitable for pipes made of metal. In such structures, in addition to a blockage, the cable will help partially get rid of rust, and its use in plastic can lead to serious damage due to excess mechanical pressure.

Not everyone has a plumbing cable in the farm, therefore it can be replaced with an ordinary hanger (made of metal). From it we will build a mini-cable. To do this, cut off using the nippers, so that at one end our design had small hooks.

Improved mechanical cleaning devices

The devices that will follow the speech are acquired most often, with constant strong stamps. In working with metal pipes such a machine will be an electromechanical apparatus with a small diameter. The price of such an aggregate is large enough, so the optimal option will be its purchase for the whole house. After all, all owners of the apartments have been dealing with the problem of a blockage, so the acquisition of this device is advisable.

The principle of operation of the device is similar to a manual plumbing cable. But there is a couple of differences:

• the working cable in the unit is longer and has a small diameter, which allows to get to the most hard-to-reach seats of sewerage;
• installation owns more power;
• all the actions of the device are automated. It is enough just to enter a cable into the pipe, press the power button, and then the machine will do everything itself.

We remove the blockage in the plastic pipes of the hydrodynamic washing of sewage. The use of this type of technology is well deserved to be the most effective way in the fight against pollution that impedes the operation of the water pipeline.

In fact, the car copies the principle of operation in professional devices of public utilities: the unit is supplied to the drain hole, which supplies water under high pressure (depending on the manufacturer can reach up to 145 atmospheres). Under the influence of fluid, the cork is very quickly destroyed and the block disappears. Included with the device there is a sleeve (the length allows you to get rid of the cloth even in the farthest corners of the sewage) with a special nozzle. This sleeve moves in the opposite direction of the current of the water used, so the owner of such a machine does not have to apply great effort during cleaning.

One of the most famous manufacturers such equipment is Karcher. The cost of such a device is naturally not small, but it is worth noting that the unit quickly pays off. By the way, the work of the design can be used in prophylaxis, it in turn will provide almost complete disappearance of the possibility of forming a blockage.

Do not forget that after applying any mechanical method of cleaning, you need to rinse with boiling water tube, in a sufficiently larger volume.

Chemical Pipe Cleaning Method

Recently, people most often give their voice to the chemical method of cleaning. In this regard, many new means to eliminate the block appeared on store shelves. And since their assortment is huge and every day increases them as follows:

• funds in liquid form (it is best to apply this species because it acts more mildly, and also convenient to use);
• dry funds (on the appearance - bulk powder);
• acidic;
• alkaline.

The choice of means affects the type of material from which the pipes and the cause of the blockage are made. But the most popular among buyers for the year is universal. As a basis, acidic compounds were taken in their composition, which easily corrosive contamination of any type. The most famous manufacturer of such a means is "Mole."

There are a number of tips, how to properly apply the chemical method of cleaning:

• first you need to fill in boiling water sinks and withstand 25 minutes;
• next, add a cleansing solution on a couple of hours;
• be sure to rinse everything in the end with cool water.

It is always important to remember that any household chemicals (even "mole") are aggressive, and therefore any work with their application must be carried out extremely gently and carefully. Any actions are carried out exclusively in protective gloves and follow everything to one rule indicated by the manufacturer on the packaging.

Folk ways

The problem of sewage pollution exists from its appearance, therefore, in the old days, folk methods for removing a blockage in the pipes were invented, which are used in our day. The most common among them is the use of soda and vinegar. To apply this method, you need to do the following:

1. In the plum hole, approximately 200 grams of food soda are poured, pour vinegar in equal amounts on top.

2. We close the cork hole, so that the foam did not start to go out.

3. Foam, which is the result of a chemical reaction, effectively begins to eat all the contamination, while eliminating the blockage.

Soda can be replaced by Alka-Seltzer, it can also clean the non-dried pipes. We throw 2-3 tablets into the plum hole, and then pour 1-well a mug of vinegar. After 3 minutes, we serve hot water through the pipes to contribute to the pushing of dirt. In addition, using Alka-Seltzer in addition to get rid of the unpleasant odor.

Cleaning siphon

Many men know that in addition to eliminating a blockage in the pipes, it is necessary to clean the siphon. This process will allow you to get rid of the accumulated garbage and eliminate the unpleasant smell.

The cleaning procedure includes the following actions:

• on the floor, we have a cloth (well absorbing moisture) so that it is directly under the siphon;

• on top of the fabric we put the pelvis, it will help to avoid spilling polluted water to the floor;

• we immediately unscrew the shutter nut, after which they remove the flask;

• after the previous action, the water will begin to flow into the pelvis;

• siphon needs to be washed under running water, thoroughly removing from the walls of the accumulated flare;

When installing the design, follow, ensure that the running pipe is in no case relied on the flask. This is a very important point, since the hydraulication can be broken. In order to check how sealed all the connections, you need to open the crane and fill the hydraulic.

It is worth noting that this kind of cleaning can act in the role of prevention, but for this it must be carried out every 4 months.

Consider that in the absence of positive results after applying all the above methods, plumbing must be called. Apparently, the plug was formed at a great depth, and clogged through Chur tight.

Preventive measures

One of the most common ways to block the pipes - fat. It enters the sewer after washing the dishes and tightly settles on the walls. If blockages in the pipes, due to fat deposits, occur regularly, then the admission of the giro-waiter will be better prevention. The design is attached to the washing. The device filters waste that contributes to clogging sewer pipes.

The principle of work of the giroslavl is very simple and consists of 2 stages:

1. The water contaminated with particles falls into the 1st department, where cleaning from various types of garbage is performed.

2. In the second section of the unit, water from fat is cleared and is derived to the sewage pipes, thereby ensuring the long and carefree operation of the water supply.

In addition to installing a special unit, it is worth sticking to more prevention recommendations:

• it should not be poured into the liquid sink, which includes culinary fat;
• before the start of washing, clean the dishes from the residues of food;
• once a week, remove the blockage in the pipes at home using vehicle or boiling water.

• during the choice, pay attention to the active ingredient (acid or alkaline);
• from the concentration of the main substance depends on the action time (the greater percentage of concentration - the less time);
• it is forbidden to reveal the tools in the pipe, as this may cause the destruction of the pipe walls due to the presence in the solution of aggressive substances;
• after the end of the exposure time, it is necessary to wash the sewer pipe with cool water;
• pay attention to the purpose of the fund. Mark "Prevention" means that this solution can be used only in pipes with a slight block. Therefore, more rationally apply them once a week, in order to avoid emergency situations. With a complete blocking of the drain of water, it is necessary to buy funds, on the label of which it is indicated: "Can work in standing water."

After reading this article, people will not be wondering how to remove the blockage in the sewer pipe on their own, and thereby save money on repair. But always remember, the best tool from blockages is timely prevention.

Zoor in the sink is a very unpleasant phenomenon, the cause of which, as a rule, is non-accuracy in the implementation of simple rules for the use of plumbing. Everyone knows that nutritional waste cannot be merged into the sink, especially if there is no special lattice insert plug.

Most often, with such a violation of the rules for using the sink, the drain siphon is clogged - the curved segment of the pipe under the sink. However, blockages sometimes still arise. How to solve such a problem, you can learn from our article.

Procedure for the fight against clouds

Before changing the zoom in the sink, it is necessary to remove water from it and all pollution and take the following:

• How to clean the zoom in the sink? Immediately after the deceleration of the outflow of water from the sink, you must use tools for cleaning. To this end, as well as for preventing blockages, experts recommend using specially intended for this purpose. chemicals, widely represented in the trading network.
• Habitual vantuzAs a rule, it helps in most cases under blockages and therefore is considered a very popular tool to restore water outflow. Vantuz is a rubber cap equipped with a handle. When using it, due to the pressure drops under the cap, the formed plug in the drain pipe, which caused a blockage, is quite easily destroyed.

• Effective way is considered flushing of siphon and adjacent pipes. It is recommended to use special means of household chemicals, for example, "Mole" for metal-plastic and metal pipes, for pipes of any type - Tiret, Mr. Muskul. When using chemicals to ensure safety, you need to use protective gloves. Chemically active components of these funds dissolve hair, food residues, and also destroy bacteria. Therefore, their use is effective for cleaning pipes and eliminate the unpleasant odor from the hole of the shell.

• If all the events performed did not bring the desired result, the removal of the stammer in the sink ensures plumbing cable.

Special cases

How to remove fat deposits in the drain siphon

Fat, deprecated in the drain siphon, accumulates over time. In connection with this unfavorable process, the clearance of the pipe is narrowed, and as a result, it becomes insufficient for water flow.

Clear fat deposits can be quite simple:

• for various pipes other than plastic - it is necessary to regularly pour the pan of boiling water into the sink, as well as clean the drain with a vestion,
• if the pipes are plastic, then the washing powder is diluted in moderately hot water (a glass of powder on a 5-liter pan), well stirred a solution and a slow jet is drained in the sink flow (if necessary, the procedure is repeated).

Advice from a professional:Fat contaminants in the siphon are a widespread cause of the sink clogging, so the simple washing of the siphon for 20 seconds of hot water every time after washing the dishes is an effective measure of the prevention of the occurrence of blockages.

How to clean the corrugated pipe for drain

On the corrugated surface, the sedimentation of fat, soap, detergents and various contaminants occurs very intensively. Therefore, corrugated pipes are necessary to periodically clean and rinse. Otherwise, the risk of breaks is very large.

In accordance with the rules, it is necessary:

1. before removing the blockage, you need to unscrew the pipe from the funnel located in the sink;
2. disconnect the upper pipe from the drain into the sewer;
3. crankshaft (siphon) gently remove;

1. tube stretch in such a way that all the edges placed, and rinse it with water;
2. more thorough cleaning of the pipe is carried out like this:

• with the help of a piece of cellophane and ropes, it is necessary to close one end of the pipe;
• pour hot water inside the pipe, and close the other end just like the first;
• taking a pipe with hands from two ends, carry out circular movements; If you repeat the action several times, the effect of purification will be significantly higher;

1. the siphon is cleaned, as well as the pipe, sometimes specifically clean the tank, are designed to defend water;
2. after completion of the cleaning procedure, all parts are tightly screwed.

Does the purification of drain pipes contribute to the powders with biodevices?

Effective remedy for sink break - washing powders, which contains biological additives. Among such funds are popular, Bio, Bio-Mig, Bio-C, "Dosia" powders. The enzymes contained in these powders provide effective splitting of organic pollution.

In order to rinse the pipes in the event that the sink clouded, it is necessary:

1. before breaking the blockage in the sink, it is necessary to remove water from it,
2. pour a hot solution of liquor or soda to the drain hole, you can use special effective means "Mole", "Mole-2",
3. take a break by 1.5-3 h,
4. after a break to pour hot water into the drain hole,
5. clean the drain of VanTuz.

When cleaning breaks, plumbing preference is preferred flexible cable

How to remove a blockage if the washing of the pipes does not help? Plumbing in such cases use a three-meter flexible cable. Due to the peak nozzle with screwed movements into the drain pipe, the scored area is destroyed. After cleaning the blockage it was possible, we need to wash the pipe with a large volume of hot alkali solution.

Advice from a professional:Metal cable must be used carefully, as it can damage the surface of the pipe, especially if the communications are old and have not changed for a long time.

Each modern adult should know how to clean the sink from a cloth so that such a nuisance does not create unnecessary problems. The use of preventive measures using effective chemicals largely solve this task. However, often the problem may be quite serious and it will not work independently. In this case, it is better to invite specialists and, perhaps, think about the need to replace sewer pipes.

Soda is an excellent means to eliminate a blockage in sewage pipes. How to clean pipes soda and is it safe for the sewer system, we will talk in this article.

Causes of pipe clogging

The reasons for clogging sewer pipes are not so much. They are:

• non-compliance with the rules of installation (incorrect slope of the pipe and the use of cement mortar, for example, when installing the toilet);
• entering the body of the foreign object pipe;
• the formation of a thick layer of outflow on the inner walls of the pipe as a result of long-term operation;
• implementation of incorrect care or its complete absence.

To establish the performance of the sewer system, it is necessary to eliminate the blockage. And the sooner to do it, the better, otherwise an unpleasant smell may form, to get rid of which it will be very difficult. This can be done both independently and with the help of a plumbing specialist. However, its services are decent money, so pipe cleaning at home is the optimal version of the breakdown.

Ways removal methods

There are several ways to eliminate the blockage:

• chemical (professional agents and home);
• mechanical.

Chemical finished means

The chemical method implies the use of funds on a chemical basis, the composition of which "corrosive" deposits formed on the inner walls of pipes. These funds are capable of eliminating the block in a short time, while they are completely safe for the sewer system, regardless of which material it is made (plastic or cast iron).

However, their use is unsafe for humans. Apply them should be very careful. In the hands of mandatory need to wear rubber gloves, and on face, preferably, a mask. Since chemicals have such a property as evaporation, their pairs can cause a burn on the mucous membranes of the nasopharynx and eyes.

To avoid expensive replacement of the sewer system, at least once every 2 to 3 months you need to use any chemical means of industrial production with a specific purpose of cleansing sewage.

Mechanical method of cleaning pipes

This method implies the use of one of the following tools:

• vanutuz;
• wire;
• cable plumbing.

If the blocking is mesmer and shallow, then the cleaning of pipes at home can occur with the help of a conventional herz, which is available in each house. To do this, it must be turned into a sewage hole and hasty adequate movements to try to break through the waste masses. If the barn range exceeds the length of the hesh, you can use the flexible rod by attaching the ERS to it. The resulting design must be pushed into the sewage pipe to break the blockage.

Vantuz is also an excellent item capable of breaking the waste masses and release the passage for water drain. For this you need:

• bowl of the cantoza completely close the water drain hole, trying to completely overlap air access to it;
• pour water into the bath or sink so that it completely covers the cow of the canto;
• make a sharp 20 vertical movements, the tube handle must be kept under a slight inclination;
• dramatically remove the water from the water.

This method of cleaning pipes must be done until the blockage is completely eliminated.

How to clean pipes at home with wire or cable? Everything is very simple, for this you need:

• put on the gloves on the hands;
• disassemble under the siphon sink;
• slightly push into the sewage hole of the cable or wire;
• circular movements push the wire or the cable, gradually promoting forward to the complete breaking of the seafrine.

If you have no cable or wire at your hand, then in this case you can use a screwdriver or an electric drill. They will effectively cope with the task.

People's methods for cleaning the sewer system

But now let's talk about how to clean the pipes by folk remedies, but in particular soda. This method is very simple, any hostess will be able to use it. For this you need:

• take in equal amounts food soda and vinegar (enough will be one cup);
• flush soda sewer plums, to pour vinegar from above;
• close the plum plum and leave for the impact of 2-3 hours;
• rinse drain with several liters of boiling water.

Soda for cleaning pipes was used many years ago. This method is one of the most efficient and safe. It perfectly copes with the task, while it does not harm the inner surfaces of sewer pipes.

Cleaning the tubes of soda can occur both when clogged and for prevention.

Another popular way is the use of ordinary lemon. It is necessary to squeeze several fresh lemons into the drain hole and leave the pipe without running water at least for an hour. It is possible to replace fresh lemons of half a cup of lemon juice concentrate.

To avoid expensive replacement of the sewer system, it is necessary at least once a quarter to perform prophylactic pipe cleaning.