Most often, gardening tools of the dacket occupy the entire useful Shed Square: "A place to store meter per meter, and everything is forced by shovels, chips and rakes - not to pass." Let's see how the catering shovel and robber, trimmers and other devices are the most accurate and organized FRUMHOUSE users.
Support for gardening inventory do it yourself
Such a stand is easy to make it yourself. For beginnings, count how many cells you need to store your shovels and flat. The crossbars with a length of 40 centimeters and a width of 6 centimeters to nail to two boards: one - from above, the other - below. Boards must be in the center of the crossbar. Make the bottom box (it is necessary for the stability of the design, and to fix the inventory in the cells). From the ends to the box and the grid, supports, boards height 70 centimeters are nailed.
If the stand is too lazy to make it, it can be bought: Plastic Stands for storing inventory with long cuttings of various diameters are sold in many stores for gardeners.
Some, by the way, use inverted beers from under beer, insert shovels, forks, etc.
All these stands do not occupy a lot of space, but somehow occupy. Therefore, many users of our portal prefer another approach to the organization of storage of shovel and flat area: when some special space is not created, and already existing walls and ceiling are activated. To do this, the holes are done on all cuttings and laces are tied to hang on nails under the ceiling, special semicircular fixtures for storing hoses and extension cords are nails on the walls and the like.
Stayer4x4 user forumhouse.
Moscow.
I recommend to master not only sex surfaces, but, if possible, suspend the tools on the walls. Through the block, it is very convenient to raise when storing bikes, you can also suspend on various chainsaws, garden vacuum cleaners, benzo- and electrical scanners.
"Gipping" for Trimmer
Tigraosp came up with how to store a benzotrimmer - a thing, "very horned in storage." The Device of the Shelves in the store came across the solution: there should be such a protrusion of two "rods" with a semicircle at the end, like grasp for a Russian stove under cast iron. The hanger in the form of grape was welded under the sizes of the trimmer, dressed, in order to avoid scratches on the trimmer, in the rubber hose and knocked almost under the ceiling.
Tigraosp. User forumhouse.
Hanging and not noticeable, just class. It came up, took for the shaft, lifted, brought out of the grasp and here it is yours.
Organizers for gardening inventory
We will show you some examples of countering chaos that allow for a long time to preserve the garden inventory in excellent condition embodied by users of our portal.
Pirmid built a barn and took it in it like such specials with a separate entrance for the Shant tool and other smokers for the garden. "After a vain attempt, it was born such a design from a twisted heap of forks."
na Zzzalso equipped a small room for storing garden equipment and tools. Scales were bought in a shopping store, lattices, hooks and drawers - in the store for shopping equipment.
Now storing the shovel in the barn on the hanger looks like this:
Here is another inspirational example - hanger for shovel and robble:
PVC pipe niches
User forumhouse. LimmpoPo.it offers this option for storing inventories: all garden "fittings" stand in string in special niches from PVC pipes.
I just like the idea: just, but how beautiful! But - not so comfortable. To insert a shovel or rake into such a rack, they need to be raised almost under the ceiling. On Forumhouse, this know-how has been improved: the side of the pipe is made incision, which, by the way, will allow insert a tool into the rack with a handle on a cutlery. You can do something like a fastener: cut down the lane from a plastic bottle, one of its side is fixed on the wall, and to another to make a hole. Attached to the wall to the wall - "But the loop in the carnations on the second wall".
Another idea, for quite a pedant: make the bottom of the excavation, limiters from the sewage with a diameter of 50 millimeters, and put the tools not upside down, and the working edge is down. Then exactly, as in Struck, they will stand not only in the picture, but also in reality. By the way, such racks can be tried to make plastic bottles.
That's how else you can store any garden equipment on long cuttings. The simplest, made by their own hands, stand: two brackets, the twine with a carnation at the end-invention is tied to one Anna Sokolova.The tools carefully stand in the corner, are not confused under their feet, easily removed as needed. And most importantly, it takes very little space!
Storage of small tools
A small garden tool is convenient to store here in such bags:
Or hang on metal slats with hooks (they are more reliable and cheaper than plastic stands).
But - just a brilliant designer idea: a small garden inventory, all these blades and rhymers are suspended for the teeth of the old Grabel, which, in turn, hang on the carnation, driven into the wall.
Garden Inventory
In general, the storage system of the garden tool strongly depends on the room. It's one thing, if at your disposal is half a garage or specially built for this purpose for these purposes, and the other - if all that you have and your tools and your tools are a meter size staircase. "At first, the room, then the guidance of beauty and amenities in the placement of the buckets you need, shovel, Vil, Grabel, etc., - they say forumhouse. So, U. Stella777 There is a separate room for storing tools - continuation of the kitchen, but with a separate entrance. Stella777 She watched the wall with a lacquer, covered with varnish, bought in construction stores of hooks and shelves and now has "order and free approach to tools."
Another important point: before putting the tool in place, most of the Forumhouse users brushes it or washes. If you clean the shovel even after simple perplex of the Earth, wash the plane under the crane or in a bucket with water, with time the remarkable habit of keeping the working tool is in order.
We offer you our article about unusual, but effective, video news about updates in the garden tool market, discussion on the topic: "Garden tools: what to choose."
Ecology of consumption. Manor: If you felt that the search for the right robel takes too much time or just think about the demolition of the old barn, which brings more problems than benefits, because Inside it, everything fell into a bunch - it's time to think about the construction of the "right" shed. But how he should be, and it will be discussed.
If you felt that the search for the right robel takes too much time or just think about the demolition of the old barn, which brings more problems than benefits, because Inside it, everything fell into a bunch - it's time to think about the construction of the "right" shed. But how he should be, and it will be discussed.
And first, it should be noted that a barn or other design for gardening inventory can not only perform your direct function of a banal storage facility - if you attach a bit of fantasy "House for Grabel" is able to even become an decoration of your garden plot.
Storage of "High" inventory
It makes sense to divide your tools into several categories and create your own small storage for each of them, pushing out of their form and destination. For example, to store such an inventory as shovels, rakes and other tools with a long handle, you can make a high and narrow shed, dimensions resembling a telephone booth. In such a booth, its contents will not constantly fall to your feet (or on the head), but the desired tool can be easily found immediately.
You can make such a Saraike "from scratch" - from the boards and slices of slate for the roof, and then paint into some bright, pleasant eye color. Or not to narrow, but "make a" shed like a puzzle, for example, from four old doors. If at least one of them is with glazing elements, you can inspect the presence within the desired tool, even without opening the barn.
If you do not want to make a repository for a robber and shovel separately, you should take a special place for them in a large shed by making special devices that are screwed to one of the walls.
In this embodiment, you just need to create an individual mount for each tool available. If the length and height of the wall will allow you to place the entire collection, then you will not lose any more accurately.
If you decide to make a longitudinal storage system, then as holders "pockets" may be approached (polyvinyl chloride) plastic tube of the required diameter, painted on the desired number of parts. If you choose a transverse system (tools shaft parallel to the floor), then a tree can come.
But in fact, if you have a plastic pipe, then you can create a storage system for practically anything - from pencils, pliers and screwdrivers, up to drills and screwdrivers.
You can also translate into a vertical storage plane and a small garden inventory (and in principle, in general, almost any tool). To do this, you need to drive the cloves into the surface of the wall and make hooks to which even sweeping hoses can be spawned. If inside the barn (in our weather conditions, it is still better to store inventory inside) you have walls from logs and therefore uneven, then as a flat foundation you can take an inverted wooden tray, and attach the desired hooks to it. Then, among other things, you can endure the entire design at the time of garden work out.
Well, if you do nothing special, but there are free pallets, you can simply put a pallet vertically to the wall and use it as a stand, for example, for a shovel. Just do not forget to make sure the construction stability. Attach it to the wall, perhaps still have.
Storage of subjects smaller
For storing bags with fertilizers or other items that you need a little less often, it is quite logical to use plastic containers. There is nothing new in this if, of course, you do not decide to hang them under the ceiling. This will significantly save you so valuable in the barn space. If the height of the ceiling allows you to build special "rails" there and remove a lot from the passage.
This principle is applicable and for storing all the little things - nuts, cogs, carnations, and so on. To quickly find what you need, they can be covered in glass jars. And so that the cover does not lose from this bank - screw it to the lower surface of some shelf, and even even the ceiling of the barn.
If there is a problem with the fact that minor items are mixed, you can build a special sorting box in the example of toys for very young children.
It is quite possible to combine a few of the above ideas and make an outdoor, the most compact mini-shed, who does not take a lot of space and at the same time contains what you need.
Garden desk
For different small garden and business work, it seems to transplant plants in pots or cooking fertilizers, you can build a table that will allow you to do everything with comfort without being flexing "in three deaths."
Make it, like everything else, can be from scratch on your own sketch, but you can build from the old bench, the old table, the pallet, which served the door. For greater amenities, install on your desktop as a back wall piece of a metal mesh from the fence, which can be cheating in addition to other things.
As you can see, ideas can come up with a lot - the main thing to start. What do you want! Published
P.S. And remember, just changing your consumption - we will change the world together! © Econet.
Join us in
The cottage is inventious for many urban residents, tired of routine work and a noisy megalopolis. But here, as in the city apartment, it is important to properly organize storage systems. We have prepared 10 practical and stylish ideas that will help keep in order garden inventory.
1. Old fence
At the cottage, old things acquire the second life. Like, for example, this discharge fragment of the fence. It will not be able to use it as a fence, but it is able to turn into an organizer for storing garden inventory. At the same time, it will successfully complement the exterior.
2. Railigs
The traditional place of the use of rails is in the kitchen. It turns out that they can perform the role of minor garden tools at the cottage. They are good because they can be fixed on the door in the utility room or the shed, in the closet or even on the fence.
3. Palemp
Wooden pallets are famous for their versatility. Of them make coffee tables, beds, tables, headings, decorate them interior. The use of them will also be in the country, especially for overall tools. It is worth only to put a pallet vertically and fold the shovels, thrusts and rakes into it. So that such a storage system does not overturn, it is best to fix it with the help of nails to the wall.
4. Board-organizer
The so-called board-organizer (PEGBOARD) has already managed to take its place in home offices, in kitchens and garages. It is convenient because it has a lot of holes, and it is easy to fasten a small garden tool. The board does not take up much space, it is easy to repaint in any color, as well as it is mobile and little weighs - it is enough to remove it from the wall and transfer it to another place, if necessary.
5. Hooks
Hooks, perhaps, the easiest and most quick option that does not require special costs or effort. It is enough to install the required amount of hooks on the wall and put inventory on them. By purchasing hooks in a shopping store, you should pay attention to special double holders for garden tools. So, rakes, secateurs, shovels and other tools will always be at hand and in order.
6. Door
If the garden inventory is used very often, then you can take the place right on the street. For these purposes, it is convenient to use a fence or a door that is not operated. Upstairs to equip one or more shelves for flower pots and any little things. At the average level, organize the storage of a small garden tool (secantors, scissors, scoops). In order to secure them, it is enough to drive several nails, instead of hooks. Immediately you can hang several overall shovels or lower them lower below.
7. Bags for trifles
In the design of apartments, special textile or polyethylene organizers for storing small items often apply. Usually they are hanging on the door or in storage rooms. This convenient fixture is useful in the country. It will fit gloves, scissors, a secateur, scoops - everything you need to care for flowers.
8. Plastic and metal containers
In the country, there will be no extra plastic and metal containers. It is more convenient to fix them on the wall or hide under the table. They can neatly distribute the tools and household goods of medium sizes.
9. Flower pots
There is one convenient device that allows not to lose the small inventory on the garden (and then not to spend time on his search). This is a flower pot with sand or rubble. It is only worth fixing in it a scoop or a secateur, and they will always be in sight.
10. Rake
If there is a robber, which are no longer used for their intended purpose and simply lying in the barn, you can make a hanger for a small garden tool. For convenience, it is necessary to secure it at the level of elbows, so as not to lean over the inventory too low or not to reach it.
The country season in full swing is the time to explore the brilliant solutions for the cottage in our special review, where we have collected.
Searches for anything - it is always a meaningless spending time. The mess in the barn, in the storage room or, as you know, causes a lot of inconvenience - everyone knows about it, who at least once, absolutely really occurred to his own favorite rake. General cleaning and guidance of the perfect order We offer to start with a rack for garden tools, which is easy to make your own hands.
And just now, when the country season is already finished, probably, it's time to engage in the construction of such garden tool storage rack. If it were about the storage of robel, shovels and one or two scissors, it would not be worth worrying about the mess. All problems would be solved by hanging the hook pair on the wall. But the garden tool is not limited to, fortunately, only by these items. Fortunately - because the numerous variety of special garden instruments turns the majority of work in the country's pleasure. That is why we often cannot resist buying one or another tool, but such a necessary tool.
As a rule, these tools are rare enough and as a result often "disappear" somewhere. And at the most inopportune moment - exactly when they are so necessary. Now, if each of them had its own, strictly reserved place ...
We offer you several different hangers, holders and racks for storing garden tools. Or just a rack for storing the entire garden inventory and tools. Some of them are designed for storing tools with different types of handles, others were invented for storing a strictly defined tool. All holders for such a rack are easy to make out of planks and cropping boards. Wholeboard hanger can be fixed horizontally along the wall. The width of the board should not exceed 15 cm to visually not clutch the room.
Wooden Rack for Tools with Deep Cutouts
Surely in the cutter box you can find a $ 10 cm width board. Make it with a hanger for tools. Make it with hacksaw and cutout U-shape with a diameter of 35 mm. The distance between the cutouts at 15 cm will be practical. The third part of the boards width remains empty, in order to glue the overhead to it. This plank is screwed straight to the wall.
There are many ways to make the tools do not fall out. On the left and right of the grooves you can screw the screws and pull the rubber strip (left), attach the hook (center) or attach a rotating bar between the grooves (right). In a horizontal position, it records the tools, and in the vertical - frees.
The tree will endure everything
All ingenious just! Wooden pegs are an excellent solution for our hanger. They can serve for storing shovels with a T-shaped handle, an electrocabylon - extension cords and garden scissors for trimming bumps. Diameter of pegs - 15 mm. Their edges are better slightly rounded with emery paper.
The base of the tool for the tool with long weapons - shovel, forks, robble, etc.
Mount for a secaterator and scissors
This holder is suitable for a tool with a wide base. The board is fixed with two screws. The width of the board and the distance to the wall are determined on the basis of the size of the inventory. A similar way is made and fastening for the secateurs. In this case, the attached board is wider and it is attached using four screws, which guarantees the strength of the retention of scissors.
 |  |
Reling with hooks will always come in handy
Small items, as well as tools with handles comfortably hang on the hooks. Realing for this purpose is made from a cutting of shovels and two wooden pads. The edges of the pads need to be mad and polished. Then, from the inside, they are drilled by one deaf hole of the corresponding diameter, the cuttings are pasted and the reling in place.
 |  |
Ax in a case
The third option for making the holder for tools from cutting boards is a place for the ax. An intermediate board has a triangular shape for a reliable fixing of the ax.
Each handle - by pipe
Thoughtful holders exempt the place and create order. This holder consists of boards and pipes.
Holes for pipes (40 mm) are cut at a distance of 25 cm from each other with the help of a hacksaw, and the recesses in the main board are made by the forstner drill. The planks located below are glued, and the boards are screwed to the wall - first the bottom, then the upper one.
 |  |
On the desktop all at hand
There are enough pairs of boards so that the desktop gets the shelves. If the wood is impregnated with the protective composition, the table can remain outside throughout the year.
It will take the manufacture of only half a day. True, an assistant is simply necessary for successful work.
 |  |
First, the boards screwed on the opposite sides of the table, after which it will stand steadily. Then the remaining four boards are installed to form a straight angle. Holes for tools are cut in advance. For inventory with long handles, it is necessary to provide individual, more spacious places. Treat their location in advance.
If you need to make it once or difficult to make the tool storage rack, then, of course, you can always buy ready-made attachments for inventory, which in garden and building stores are quite a lot. Here are some examples.
With the onset of heat, gardeners and gardens get tools and a diverse economic inventory from the sheds and storage rooms. In the midst of spring work, everything that is necessary to the gift book should be at his hands. There is always a need for shovels, rakes, scoops, vilas and secateurs. On the one hand, you need them to be as close as possible to the place of work. On the other, how do you not want a neat view of the site disrupted scattered around the items! Output one: You need to define and equip a place for summer storage tools. And in the winter they also have to put them somewhere to meet the new country season.
The aesthetics of the open space will not be broken, if you use one of the proposed ideas of convenient storage of the toolkit. All you need, you will be at hand, but not in front of your eyes.
Space under terrace or porch
If at the design stage of the house you do not even be slightly raised or, consider that the place for shovel and rake you have already been determined. It is enough so that the structure is from the surface of the Earth at least half a meter. The longer the distance from the Earth and the length of the same terrace, the wider your capabilities.
Free space under the terrace is well organized. Even the steps of the stairs are converted into boxes in which the most diverse little things can be stored.
You can simply close the space by providing it with aesthetic door. It turns out the original barn, which, by the way, will additionally strengthen the terrace. If under the porch is not too much space, it is better to limit both drawers, turning the side part of the porch into a kind of chest. The design should be chosen according to its own taste, it is important only that it corresponds to the general style of buildings.
Another option to create a utility room under the terrace of the house. It can accommodate not only a garden inventory, but also a bike, for example, or a small boat.
Garden bench is also suitable
As a rule, the space under garden benches does not particularly interest anyone. And we will fix it and do not let him be empty. Let instead of the ordinary shops we will have a box that we will put the tools.
At the same time, the total aesthetics of the site will not suffer in no way, but the space under the bench, where it is so difficult to flush the grass, it will be broken into the case. Secateurs, scoops and hoses can be kept directly next to the place of use.
This bench does not look like a storage for tools, but it is used exactly. Externally similar to a fashionable sofa, it is multifunctional
Construct special kilutes
And now we will do otherwise. First, we calculate the box with what parameters we need so that all inventory can easily fit there, and then think about what other functions he could perform on our site.
Such a wooden box will definitely have some more useful use in the economy. For example, you can grow seedlings or use it in a gazebo as a dining table.
Suppose we will make a tank with retractable shelves or with a folding lid, or even a combined structure in which the boxes are located below, and the space for shovel, robble and trims - from above. It turns out a fairly volumetric design that can be used as a table for growing seedlings, a sun bed or a place for children's games.
Original design in the form of obelisk
The decorative detail of the exterior of your home can be a very useful building at the same time. Nobody will come to the head that the brooms and shovels are here here, this design is so neat and naturally.
Who would have thought that in such a neat and inconspicuous hostep the host hides shovels, scoops and rods? Yes, at the bottom of the obelisk, the air conditioner is also hidden
The lower part of the tank can occupy, for example, air conditioning, and top tools with long cuttings will be located on top. Here you can also put fishing gear, which also need to be stored.
For the necessary little things
However, not all garden devices have large sizes. Sometimes we need trifles of the type of secateurs, the machines of the twine, gloves, scoops and pegs. Where to fold all this to not look for a long time? For them, a house-nesting house should be built on a rack that corresponds to the growth of the gardener.
This is a real illustration for the expression "all at hand". The board is designed for information that gardener cannot forget. For example, vaccination dates can be marked here.
This can be an independent storage or an original addition to a large utility room. In any case, in such a "house" every little thing will lie in its place. And just write the necessary information on the board from the inside of the door.
Use suspended structures
For curly flowering plants, cucumbers and grapes are often used various supports. On their vertical surfaces it is easy to make any fastenings of the type of hooks. With their help, it will be possible to hang inventory unnecessary to this minute. In fact, it is in sight, but it is not noticeable, or he will look quite carefully.
Carefully look at the columns, because the inventory placed on them is actually almost not visible
If the climate in your area is dry, this method of temporary storage is very pleasure. If it is often rained, then you can fill the hooks on the wall of any economic building, which is reliably protected by the hanging roof. However, it is possible to convert the entire outer surface of the wall into a kind of organizer. We will tell about his structure below.
Aesthetic cylindrical stands
If during the construction work, you have cutting metal or polypropylene pipes, do not rush to part with them. Configuring them in a quiet corner somewhere outside the house or after a conversation, you can store all the tools with the handles in them. Each subject there will be its own place, which facilitates subsequent access to it.
The only thing that is alarming in this method of storage of the inventory is a pitchfork, whose sharp teeth are directed up. It remains only to hope that this design will be located in compliance with safety
Do the shelf with your own hands
There are a lot of ways to make a simple tool shelf with your own hands. One of them we offer to your attention. To base the shelf, we need one board with a length of over 1 meter and a thickness of 40 mm. In addition, we prepare the remains of boards, planks, as well as the same triangular plywood trimming.
We take plywood triangles and on each of them weeping the electric bison, the corresponding chalkboard, which we have prepared for the base of the shelf. We screw to the triangles of cutting planks to the triangles, their edges are cut. Now every triangle is a console.
This shelf is easy to do: it makes no sense to buy new materials to create it, you can use those that remained from previous construction work.
With the help of self-samples, each console is fixed on the base board so that the shovels, rakes and other tools can hang the working part. Between consoles should insert trimming boards or chipboard. This will give the overall structure necessary hardness.
It must be said that the finished design is quite severe. To secure such a shelf to the wall, a helper is needed, which will support it. If the master works alone, it is easier for him to initially fasten the supporting board, and only then screw the consoles and elements that provide rigidity to it.
The only difficulty is the weight of the shelf itself, which will be a problem in the event that it will be attached to the wall to the wall, but in this case there is a way out
Another option involves the fixing of the finished design with one large nail, and then the final installation of self-draws. In places of their location, you can make through holes in advance. The resulting simple shelf collects all the main inventory.
Garden organizer is just
For a simple garden organizer, we will not need excess efforts and substantial financial costs. Everything is quite simple!
We will need four edged boards 25 mm thick. They must be prepared for work - to fool. The figure shows where holes will be placed on two boards. Note them. With the help of the first drill, we will make holes at the pre-mark and, then, with an electroll bitch or simple knife cut out the side feeds.
There is nothing complicated in the assembly of this organizer. The message of the nomudinal process is quite detailed on these drawings.
Connect the boards in pairs of self-assembly so that two M-shaped structures are obtained. Now we have two vertical racks. Choose the wall on which our organizer will be placed. Let it be, for example, the outer wall of any economic building. Racks need to fasten to it parallel to each other at a smaller distance than the length of the shovel.
Why not boast of such a worthy result of work? It is always nice when the tools are kept in order. With clean inventory and work will be fun
The work is over. It remains only to put the entire inventory in the organizer and rejoice that it will always be in order.
When the country season is over
When the cold and work occurs in the country, it is time to put the toolkit that served us faithfully, and send it to storage. If you comply with all the rules, we will not have to spend money on buying a new one. Spring costs and so great.
We send gardening inventory for storage
All shovels, chips, rakes and other instruments of the garden of the gardener should be presserved. Let's draw their initial inspection and repair everything that has managed to break throughout the work season. Pollution and rust need to be removed. Cleaning is better made using a wire brush or spatula. Lubricate the cutting edge and metal surfaces with oil.
It is impossible to leave the tools for the winter dirty and unwashed. Anyway, the very spring will have to do the same job. And in the spring, as you yourself know, affairs and without it
It is necessary to sharpen the blades of suchkoresis and the secateurs. To remove the jar on the blades of a suchkoresis or a garden saw, use a file. The sekator for the same purpose is better suitable for a grinding stone. You need to take care of wooden handles. They are also thoroughly cleaned, after which is abundantly lubricated with ordinary sunflower or linseed oil. Soaked in this way, the handles will not dismiss and serve for a long time.
Special attention should be paid to the fertilizer sprayer. It is cleaned, washed thoroughly and dried. All levers and fastenings of the device are pretty laughing with machine oil. Hoses free from water residue, roll into a ring and hang on the wall. It is necessary to store them only indoors.
Electrical Reserve Storage Rules
A well-equipped country area cannot do without electromechanical inventory. With its preparation for winter, the following steps are needed:
- draining all excess fuels;
- replacement of motor oil;
- checking the presence of fastening elements (brackets, plugs, screws) and replenishment of the actual shortage.
Require mandatory testing and power cords. If the integrity is broken, it is better to change them to new ones. The head of the trimmer is clean, washed and dried. Kine knives are sharpening and lubricated. Electric scissors, and grass grinder need cleaning. All knives, metal parts and mobile hinged connections of different units are subject to cleansing and lubrication.
Any electromechanical devices need careful care. But the life of the gardener and the gardener is greatly facilitated if he has and are in good condition.
In any case, the tool cannot be left where it can be rained or fall asleep. Even moisture from the fog negatively affects its operational properties. An ideal storage location will be a special utility room. If there is no such room, workshop will suit or even storage room in the house. Carefully canned gardening inventory will successfully survive the period of unclaimed and will not let its owners in spring.