Installing the external frame of window openings is usually practiced in wooden houses, where you need to cover the slots between the frame and the wall. The question can be solved in different ways: to jog in the perimeter of the puzzle boards either first cut the platbands on the windows, and then then attach them to the walls with their own hands. There is a third option - put ready-made products purchased in the store. Our task is to explain how to make such a facing on your own.
Types of decorative nachchelnikov
For the exterior framework of windows and entrance doors, platbands are used made from such materials:
- tree, thick plywood;
- metal;
- styrofoam;
- polyurethane.
Wooden facing, decorating the logs of the centuries, remains popular and to this day. It is performed in two styles - Russian, where beautiful carving with a rich ornament is prevails, and Finnish is more laconic. The latter is distinguished by straight shapes of elements and a small attachment visor as shown in the photo:
Framing in Finnish (left) and Russian style (right)
Reference. The scope of naschelniks from wood is not limited to chopped houses. Now they can be found on country cottages built from a bar and brick, including with plastic windows. As the photo testifies, the openwork pattern looks great even on a stone wall.
The main advantage of wood is not the ease of processing, although it also matters. Another thing is important: carved platbands made by an individual sketch will give the facade an exclusive appearance that you will not see anywhere else. This is a good reason to take on an independent manufacture, because the order of such products from the master will cost SHAZHA. Equally, this also applies to metal nachchelniks - they can also be cut out if desired.
Window facing of foam and plastic - a more modern way to solve the issue. And although the polymer elements for windows do not differ in the transcendental price and are easy to install, they are completely deprived of individuality. The reason is understandable - the production of polyurethane decor mastered many enterprises.
Polyurethane facade decor
Cut the wooden platband without stencil
This method is suitable for those who want to decorate the door and window openings, but does not have wood thread experience. To begin with, it is necessary to pick up the material - the boards with a thickness of 2-4 cm, whose width is determined by the selected figure, and the length is the size of the window.
Council. Choose lumber from soft wood - linden, alder or aspen. Drinking the pattern in a solid beech or oak - the task is not easy. Spruce is too sunscheled, and pine is easily cracking along the fibers, so it is undesirable to use her newcomer.
The window coating consists of 4 main parts shown in the drawing: two sidewalls, frieze and submap board. The design can be complemented with decorative impurge (otherwise - Kokoshnik). The elements are suitable between themselves at an angle of 45 or 90 ° - at your discretion.
To make naschelniks with a simple pattern of colors, act in this order:
- Spend a line in the center of the board. Focusing on it, draw a pencil circles along the entire length (you can draw a round item of a suitable diameter). Using the carbon, spend through the centers of all circles of the line at an angle of 90 and 45 °.
- Take a drill and drill a hole in the center of the circle and two more - on each line. Arrows the petals of future colors around them.
- With the help of the electro-box, drink each petal and circle the outer contour of the product, as shown in the photo. Cut extra part and thoroughly clean the resulting ornament. In the same way, make all 4 parts.
Council. If you do not speak too well drawing, use ordinary patterns to draw lines curves.
After cutting, homemade platbands need to be carefully treated outside and inside the rashpil, and then - large sandpaper. The last stage is an antiseptic coating and staining (or applying a yacht waterproof varnish). To better figure out the process, browse the video where the little boy performs all the work:
Important moment. Nothing terrible will not happen if the board will crack on 2 parts during operation. They can be born with each other with steel plates screwed from the reverse side.
Production by template
This technology provides for the applied pattern on a wooden surface with a stencil, along which the platbands are cut out with their own hands. Some samples are available on sale are presented in the picture:
Note. An individual stencil can be made independently by drawing an ornament on a sheet of cardboard, thin plywood or plastic, and then cutting it with a jigsaw or scissors.
Drilling of the workpiece under the outside of the jigsaw
There are 2 ways to make wooden nicknames for windows:
- Take boards and perform a slotted pattern, as described in the previous section.
- Drinking complex elements separately, and then secure them to boards with glue, on self-drawing or spiked. So make patterns with protruding details.
Regardless of what method you choose, the cutting process looks equally. An ornament is applied through the stencil on the surface, after which the outer contour of the product is formed by the electroller. Where you need to cut the inner drawing, first drill holes for the release of the jigsaw web. For confident work with subtle curvilinear slots, the Pillet is better to take a small width.
Ready element, which is then attached to the frieze or lateral frame of the frame
Note. The same technology is used for the manufacture of platforms from thin metal or professional flooring. Just need to pick up another cutting tool.
We bring to your attention another video, where it tells how to make the window cladding on the template without the use of jigsaw, coping with only a drill with a crown drill:
Installation instructions
In order to install platbands with a slot pattern, there are no special wisdoms. The design can be collected on the table, and then put on the window entirely either fix in parts. In the chopped wooden house for mounting the facing, it is necessary to prepare sites around the perimeter of the opening, cutting the logs to the width of the board.
The element assembly on self-drawing is made in this order:
- All carved parts are treated with varnish and decompose on the places on the prepared board to form a drawing.
- If you need to make a large screw, then use several boards interconnected by corners as a base.
- Each elements are screwed to the base, screwing the screws on the back side of the board.
- Finished platband Install the flush with the window frame so that it closes the gap, and secure long screws. With sash opening out, make an indent 1-2 cm so that they sprinkle at 90 °.
Council. In order for the elements of the ornament did not move during the attachment, gently tighten them to the base of the clamps.
How to install carved nachets, is shown in the video:
Conclusion
Cute platbands with beautiful ornaments are wonderful on any windows of both wooden and plastic. It is impossible to say that they are complex in production, but will have to work. Success largely depends on the quality of wood and your qualifications. In order to prevent errors, it is recommended to select the drawing easier and "fill the hand" on the facades facing the backyard. Then the front side of the house you will place flawlessly.
Designer engineer with experience in construction for more than 8 years ..
He graduated from the Eastern Ukrainian National University. Vladimir Dalya in the specialty "Equipment of the Electronic Industry" in 2011.
Tubes on the windows in a wooden house look just gorgeous. But it is worth understanding that if they are from the tree, they will have too much load under the influence of environmental factors. Humidity, solar rays, temperature drops - all this will lead to rotting of wooden elements. That is why it is important that the wood is carefully processed and stained, as this is the only way to preserve their presentability.
Production features
Prints make enough simple. Protective platbands are highlighted on the windows in a wooden house and with overhead carvings. The slit products are considered the most openwork, decorative, as they are made of bright shades wood, painted white paint. Therefore, on a dark facade, it looks very beautiful as lace. With the technology of creating with overhead thread on a solid board, elements cut out separately. In this embodiment, the drawing is obtained textured and volumetric.
Send the material to you on E-mail
The platband is the decoration and functional part of the window on the facade of the building. This tradition comes from a long time and does not lose relevance today. You can make beautiful platbands on the windows in a wooden house yourself. At the same time, many products are performed not only from wood, but also from other materials. Creating similar elements requires certain knowledge and skills, as well as suitable tools.
Unusual flavor and style make carved platbands with a real decoration of construction
Currently, the installation of platbands on the windows in a wooden house is again demanded. The photo below allows you to see the best examples. This element emphasizes the desire for the revival of the traditional decor.
The advantages of this element include the following:
- performs a decorative function and helps to visually expand or pull the building;
- complements the general style of architectural solution;
- protection of the space between the window opening and the surface of the wall from moisture and dust;
- reducing heat loss and noise level;
- he emphasizes the personality of the structure and style of the era like.
Also, this design has some drawbacks:
- wood requires a certain processing from high humidity and swelling;
- the need for constant processing and regular care;
- do not combine with metal-plastic windows.
Helpful information! When combinations of wood with metalplastic, they need to be performed in a single color scheme.
Templates of carved platbands on the window do it yourself
There are various platbands on the windows in a wooden house. Their varieties are often dependent on the method of fastening to the window.
By type of fasteners, you can select two types:
- telescopic products possess M-shaped protrusions that coincide with the grooves of the window box;
- the invoices are installed on the window frame with the help of construction glue or nails with screws.
The original solution is considered to install carved platforms. At the same time on the Internet you can find a lot of templates of carved platbands on the window. With your own hands, such structures can be made only with the help of special equipment.
You can consider the following types of materials to create similar structures:
- the traditional material is the wood;
- plastic models are distinguished by resistance to temperature rudders and ultraviolet rays;
- MDF is made from wood waste, therefore, it has greater environmentally friendly than plastic products;
- polyurethane varieties are characterized by practicality.
How to choose the wood?
Popular platbands from wood. At the same time, the performance of the product depend on the variety of the selected tree.
It is worth considering the following options:
- ash, beech and oak are solid deciduous varieties. They differ in durability, but they are difficult to cut patterns;
- it is much easier to handle soft deciduous breeds - Lipa, Osin and Olhu. On their surface, you can cut patterns even manually. Such surfaces must be carefully handled by special compositions;
- from cherry and apple tree it is recommended to create small elements that can be attached to the base;
- characterized by ease of processing and good performance properties of pine and birch.
Helpful information! You can apply different combinations of wood varieties. At the same time, special protective impregnations should be used.
Secrets of manufacturing platband templates on windows with their own hands: stencils and design
You can find on the Internet various platband templates on the windows. You can print stencils with your own hands. The selected ornament should be combined with a common style. It is not worth mixing geometric and vegetable patterns.
In the manufacture of platbands it is worth considering the following points:
- the color palette of walls and decorative products should be combined;
- it is important to choose the right size correctly. Products should not be too small or wide;
- it is necessary to choose a qualitative coating option. At the same time, special paints and varnishes are used;
- the template is required to create external carved elements.
Helpful information! On the workpiece, it is necessary to place the drawing correctly. Details should be located along wood fibers.
Tubes on the windows in a wooden house: Production Stages
Before starting to create a window decor, you can pick up the photo of carved platbands on the windows in a wooden house. The template is pre-done, which should be the same for the design of all window openings.
There are two main ways to create patterns:
- the overhead thread is distinguished by individual elements of the pattern, which are attached to one basis;
- with a slit thread, a cross-cutting ornament is performed, which looks like a lace of wood.
With any method of manufacture should be used. Special tools will also be needed:, hacksaw for wood, set of knives and chisels, and drill. Tubes on the windows are performed in a wooden house of prepared materials. The process of creating products includes several stages:
- accurate measurements are made;
- the selected wood should be dry. The width of the boards depends on the dimensions of the window opening. The thickness of the material must be at least 30 mm when performing a rubber thread and at least 10 - with overlap;
- the resulting holes are rubbed by grinding paper;
- prepared details are attached to the base. It uses glue composition or special nails.
Helpful information! When installing the platbands, the screws cannot be used, since such fasteners cause cracking.
FEATURES OF MONTAGE
The finished platband is mounted for window work in the following ways:
- installation on a deaf spike. Such details are installed on the inside. Under them in the frame are created special holes. The glue is distributed on the spike and it is inserted into the groove. Such fasteners protects platbands from dust and moisture;
- used through spike. At the same time, the place of the junction should be carefully treated with varnish.
Similar techniques are used if the window is wooden. For mounted on metal plastic, special liquid glue is used.
What care is needed?
Carved products are ground, covered with varnish or painted. Such processing are held every few years. This will extend the service life of products, and will also retain their attractive appearance.If plastic or metal products are installed, they do not need special care. It is important to protect products from corrosion and sometimes update the paint.
The manufacture of beautiful platforms with thematic patterns with their own hands will make it original and unusually decorating window openings and bring a special highlight to the conceived architectural style.
Save time: selected articles every week by mail
Carved platbands on the windows - This is a simple and inexpensive version of the decoration of your house and give it an individual with the times of old Russia. A few decades ago, each region of our country knew masters with an individual style of decorative performance of elements of platbands.
Thus, it was possible to express their own character. For example, in ancient times, a stranger on platbands could determine whose house is an official, master or just a cereal place.
In today's days, they are only decorative. Today, even the building built according to the typical project can be allocated and made unique. I am glad that interest in the origins and to carved platbands is being revived.
Everyone can make their home individual, and besides to recall the origins of the appearance of this direction of art, which originated during the time of the ancient Celts.
It is possible to design yourself and come up with a composition for the framing, and then proceed to the embodiment of the idea, armed with the necessary tools and patience. The platbands received in our time the second life, and are becoming an increasingly popular decor.
A bit of history
The word "platband" indicates its location, that is, on the face. Among the different peoples, the platbands were practiced during the times of wooden architecture. They appeared simultaneously with windows, which were glazed by a fish bubble or mica. Initially, the platbands were created to cover the insulation and for insulation from the wind, precipitation.
The patterned elements were initially noticed in the ancient Celts, but significantly came to them in the era of the revival of Russia after Mongolian yoke. Masters in Russia were the best in a tree thread.
When the time was the time of Bolshevism, carved platforms recognized as a mesh and declared war. The destruction began. Nowadays, carved elements received a second life.
Interestingly, in the old days they believed that the platbands could protect against the evil and served as a faith, so it was often possible to see various figures and plants that make sense.
Cooling value in building
Putnocks are essentially elements of finishing and the correct name - cash with a variety of functions:
Design
There are several types of carved platforms.
Overhead
Materials and form
Natural or artificial materials can be used for the manufacture of platbands. Previously, the elements were cut out of wood, which has sustainable qualities to the effects of atmospheric factors.
Important! Prints should be regularly treated with waterproof paint or varnish to extend their life.
Among other materials are used:
- — laminated MDF.Through which you can immediately repeat the color of any tree tree. But, such a thread is suitable only for internal use;
- -, perfectly combined with plastic windows. It does not rot, with a rich color palette, resistant to light;
- — polyurethane - Easy and unpretentious. Recommended for rounded windows;
- — metal - mainly used to protect the mounting seam.
Wood Before getting into the hands of the master should be searched for 3 years at least to dry condition. The board, if possible, should not contain bitch, chips, resin pockets. On the market to buy wood of this quality is almost impossible. It is better to apply to construction stores or on the panel. Interestingly, today you can buy ready-made platbands.
For self-making, chamber drying is perfectly suitable, after processing in a special chamber. She is definitely not thrown and cracks. Her humidity is only 10-12%.
Types of thread
Tell about three ways to framed:
Tubes do it yourself
Patterns pattern
To create beauty for windows, you need primarily pattern patterns that is transferred to a wooden surface.
The template is created based on the selection of the pattern, which can be found in large quantities on the Internet or just in the photo.
To increase the drawing, there are several options:
When the drawing is enlarged, it is transferred to the cardboard to cut and use as a pattern. On each pattern accounts for the template. Then the finished pattern is applied to the board, the pencil will be burned. If the windows of various sizes, it is better to make a drawing with a repeated rapport. To do this, one or two elements are selected alternately.
The upper part of the platband is called Kokoshnik, and the bottom is a towel. It is necessary to take into account that small carving is complex and faster it becomes unusable, which will further require the substitution of parts. When working with drawings, you can meet with the concepts of the bottom plank, it is the bottomroom belt, the vertical rail, the top plank, the shoulders, the vancing, the diadem, the ushko, chip, the pyline, crackers, Sandrik, Wanted and others.
Important! It is necessary to take into account the bias at the top of the carved platband to prevent the accumulation of snow and water during operation.
Design
The basis of any process is the developed project. To do this, you need to draw the drawing of the facade of the building with a detailed drawing of elements. This will help to understand how the appearance of the building will look like. If there is a visualization program, you can perform a project in volume.
If you turn to traditions, in antiquity, the elements on the platbands carried the following values:
- The sun is cut on the Kokoshnik and is a symbol of life, energy.
- Snake - reminds of wisdom and fertility.
- The cross is a symbol of harmony between the two worlds - material and spiritual.
- Plants - personification unity with nature.
- Earrings - mean hospitality.
- Bird on the window - connecting symbol of all time.
Work
The working process begins with the preparation of materials and tools. It is better to use pine boards without bitch.
Materials need:
- lobzik with smooth shower and saws;
- feather drill with a diameter of 12 mm;
- chisels;
- sandpaper;
- sander.
Marks are removed from the window, stencils are shown. When stencils are circled, drinking begins. First of all, work is carried out with inner openwork parts. To do this, you must drill holes on the contour of the pattern.
Important! The drill must be perpendicular to the board.
Then the electric lobby is entering. You need to start work with holes and then go along the contour of the pattern. When the patterns inside are made, you can proceed to external. The tool should work from one end of the platband to another. To facilitate work, you can make inscriptions.
The result is the finished part one way. For the other hand you need a mirror reflection pattern.
Be sure to give an aesthetic appearance, a grinding machine or paper is used. An emery circle with graininess 80 is used. The fastest option is the grinding, slowly it will turn out to make a drill with the emery circle and very long - emery paper.
After the work done, the platband can be primed to protect against bugs, mushrooms, rain, sun and paint.
Painting
It should be understood that the wood is very sensitive and can bend or damaged in the consequence of insect attacks, so often the part is processed. The better processing, the longer the decoration will be. Details must be carefully seen. Then you can paint the surface. Ideal for wood waters. The color can be chosen at will, in this case it is often used white and cherry.
You can buy oils for wood absorbed into it. Update such a coating is easy - brushed dust and painted on top. Among the minuses is a high price and a small selection of color scheme.
For painting you need to prepare two brushes - wide for the outer surface and narrow, for lateral parts and hard-to-reach places.
Coloring is carried out in two stages. The second layer can be applied after drying the first.
The final stage becomes varnish, it is better to buy an acrylic composition on a water basis. Varnish is applied in one layer so that it is not formed. Drying of platbands is performed outdoors.
How to collect
Before the installation, the details are collected on the window to work more convenient in the future. It is recommended to use forests to secure the process and make it more convenient.
The classic version of the installation of the platbands is the mounting to the wall or slopes. Today it is performed using 4.2-6x80x150 screws. In the case when the wall is not wooden, then propylene dowels are used. As a rule, one point of attachment on 5 square decimeters of the platband.
When connected to the slopes, a step of 150-300 mm is used. The digit varies depending on the mass of the platband, depending first of the thread. The heads from the fasteners are hidden in the valid of the top level, or apply putty and painting.
With overhead thread, ready-made elements are attached to a wide platter with nails without hats. For strength, the compound is lubricated with glue. Self-tapping screws can damage the carved site.
Telescopes
Modern buildings are already insulated and are trimmed often siding. The windows usually put flush with the main wall so that it does not drown in it. Fastenings are carried out on the frame without options. Of course, unless telescopic models are provided. However, they will be able to hold only in reinforced frames used in places with a harsh climate. Frame material itself is a more durable or modified wood.
Telescopic elements are installed on the cut-made quarrel elements associated with the rigidity of the frame. Fastening provide grooves. Such telescopes are not provided for installation outside, even the impact of the wind is capable of breaking not only the platband, but also the whole frame.
On a wooden frame or PVC with a groove under the knap, telescopes are installed without removing it. In case the base surface of the window is not available, you will have to pull out all the window.
Nuances with carved finish
- combination with the house - often when combinations with plastic frames, difficulties appear. It is better if the plastic in this case will mimic the wooden structure;
- your experience if the platbands are made for the first time, then you need to choose the pattern to be easier;
- in each region of the country existed their traditions and registration
Wooden window platbands - the element of the decorative finish of the facade of private houses, which is more common in the countryside. They embody the traditions of the original Russian architecture and are real works of art.
Finding beautiful carved platbands are difficult for sale, as this type of facade finish gradually loses its popularity, and masters who know the subtleties of their creation, it remains less and less and their services are not suiced. But connoisseurs of traditional design of houses can decorate their dwelling on their own, making the platbands with their own hands. Of course, this work will require patience, training and preliminary study technology. Useful prompts for the manufacture and installation of wooden platbands can be found in this article.
Why do you need window platbands?
Tubes will decorate the facade and will keep warm in the housePreviously, people believed that certain patterns on the platbands are endowed with magical properties and are able to protect the inhabitants of the house from the evil eye. Now they are valued mainly for decorative qualities: the ability to emphasize the style of the house, give it a complete view and revive the facade. In the case of the houses from the cut, this type of window finishes is the only possible, since plastic in combination with the tree will look inappropriate, and the building will lose its flavor.
However, platbands have a functional purpose. This element of the window protects the room from heat leakage, drafts, dust and noise, closing the slots between the opening and the frame. The only lack of wooden platbands is the need for their proper processing and careful selection of wood.
Types of pallets from wood
The manufacture of platbands depends on their structural features and installation method. According to the design, they are shaped, flat, curly and openwork. Flat do not have threads and easy to manufacture, shaped and figures have a convex surface with a non-separated pattern applied to it and are made on the milling machine. But handmade products are appreciated above, since the equipment cannot create an end-to-end pattern.
Install wooden platbands in two ways:
- Overhead - design is fastened with metal or liquid (adhesive) nails and screws.
- Telescopic - the platband is kept on the protrusions, connecting with the grooves of the window box. This method is more complicated than the previous one, but the appearance of the product does not deteriorate from traces of fasteners.
Options for registration Visual design varieties also exist a lot. Specific patterns and technology of their creation We will look at below.
Wood for making platbands
Material must prepare well To make wooden platbands on the windows that will serve you for a long time, it is necessary to choose the way to choose a variety of wood for them. For this purpose, suitable: larch, linden, oak, pine, beech, nut and fruit trees (apple, cherry). Decide on the option suitable for you, you can assess the quality of these breeds:
- Solid wood varieties, such as beech and oak last longer, but it is more difficult to process them. Cutting patterns from these materials will take a lot of time.
- Soft varieties (alder, linden) are better to handle, but need mandatory impregnation with moisture-repellent compositions.
- The larch is resistant to rotting, but very fragile.
- Coniferous rocks (pine, spruce) are considered a "golden middle". They are durable and at the same time plastic.
- Fruit varieties are suitable for making small pieces - lining.
Tip! In the area with significant temperature differences, high humidity or, on the contrary, excessive dry air, it is recommended to use platbands only of solid wood.
Tools required for work
The manufacture of carved platbands will require the use of tools intended for woodworking, namely:
- chisels (semicircular, flat, curved at an angle);
- knives with a waste and wedge-shaped blade;
- electrolovka;
- drill;
- milling machine.
Do not do without a ruler, pencil or marker and patterns with a pattern. You still need a spike feeder. To make it yourself, you need to take 3 rails, place 2 blades of the hacksaw between them and fix the design. This tool simultaneously sucks the eyes and spikes of platbands.
Set of styers The value and creation of patterns
From what pattern you choose, the appearance and the meaning load is depends on which this element of decor carries. When the art of creation of platforms was born, the patterns were created not only for beauty, but also endowed with meaning. Here are the interpretations of some of them:
- the sun is associated with energy and life, it is placed on the Kokoshnik - the upper part of the platband;
- snake - the embodiment of wisdom;
- the cross is designed to create harmony between spiritual and material values;
- bird - a symbol that combines different times;
- wings indicate strength;
- plants personify unity with nature;
- earrings placed at the bottom of the design, talk about the hospitality of the hosts.
Deciding with the desired images, find the appropriate patterns on the Internet and print. On the diagram, make slots and transfer it from paper on the paneur or a dense cardboard, so you get the templates of carved platbands. Read more about the manufacture of templates (stencils) you can read in.
Templates of trunk The main ways to create window jewelry are a slit and overhead thread. In the first case, using platband templates, the pattern is transferred to wood, and then separate the design details of the design. In the second case, we first produce a casing from a solid boards, then overhead patterns are cut on the patterns and fasten them with nails, creating a bulk pattern. The ornaments of all parts should be harmoniously combined.
The upper part of the design is performed in the form of a kokoshnik, the lower in the form of a towel, and between them two sidewalls are placed. Details are connected with spikes. The upper part needs to be 1 cm more lower and give it a bias to prevent moisture stagnation.
Kokoshnik, made of slit carvings Drinking patterns, moves along wood fibers, otherwise the material quickly cracks. Round elements are more convenient to carry out the electric drill. The ornament is made up of repeating patterns, it is desirable that among them there were more rounded parts - to make them easier.
Fundamental rules
- The design should not interfere with the opening window. To achieve this, the sizes of the internal frame of the platband make more window frames for a couple of centimeters.
- It is necessary to eliminate the irregularities of the walls before installing the platbands. To do this, wooden rails fitted with each other, fitted with each other.
- For work, only well-dried wood is used.
- All windows are decorated in a single style.
Preparation for work
To make wooden platbands on the windows with their own hands, the first thing is measured by all sides of the windows and pick up durable boards of the desired size, a thickness of at least 3-4 cm. Such thickness ensures the strength of the structure, without preventing the opening of the window sash. The width is chosen depending on the pattern, it is standard from 15 to 30 cm in different parts of the platband.
It is better to make a pattern from large elements, since too small parts when viewing from afar lose, merging into a single whole. In addition, the creation of a small pattern is more time. Before drinking a "chistoral" option, it is worth testing the patterns of platbands on the windows on unnecessary slices of wood. This will allow you to "fill the hand" and check well the ornaments you choose on the material.
Repeat cut pattern on a small sample Installing platbands on the windows
Cut design details are grinding sandpaper and combine. The mount is carried out by the "spike-groove" method, both parts before docking are riveted with synthetic glue.
The installation of platbands on the window has differences depending on the wooden or stone facade, the design is fastened. To work with the stone walls you will need:
- syringe mounting;
- liquid silicone to eliminate slots;
- drill and drill with winning coating;
- self-tapping screw;
- wooden chips for screws;
- brush and paint under the color of the platband for mailing fasteners caps.
Finished design before installation Tubes on the windows of a wooden house require another set of tools and materials consisting of:
- 5 cm long nails;
- liquid silicone and syringe for applying it;
- hammer;
- suitable paint and brushes.
In addition to the listed, in both cases you will need a stepladder.
The finished design is mounted on the wall using self-tapping screws or nails, while it is necessary to close the edge slopes to the edges. All the formed gaps and loose joints are rushing with silicone, then hide fasteners hats, painting them with a thin brush. Wooden platbands made by their own hands are ready.
Finishing finish
Although, carved platbands themselves look original, correctly selected the decor will make them more attractive. In addition, wood processing is needed to increase its service life. The finished product is recommended to be soaked in moisture-repellent composition, cover with paint or varnish.
Painted pads Among the ways to diversify the design allocate: painting, firing and painting in contrasting colors. The painting can repeat patterns and emphasize attention on individual details, and contrasting painting successfully looks at a combination of several thread species. No less beautiful platbands on the windows are obtained during the firing. Treatment of wood by a soldering lamp or a gas burner forms spectacular taps on its surface.
Contrast staining of elements Whatever processing method you choose, remember that the design needs careful care and periodic minor repairs, then the platbands will decorate the facade of the building and please you for many years.