»From the material below you will learn how to make a mini-bar from a 20-liter canister with your own hands ... How to make a mini-bar from a canister, but everything is quite simple, you need a 20-liter metal canister, preferably so that it has not been previously used for storage Fuels and lubricants. If the canister is old, then you will have to wash it thoroughly with acoustic soda and other powerful detergents to fight off the smell. After that, a markup is made under the minibar door, 2-2.5 cm retreat from the edge and draw a line using a marker. Then, with a drill with a cutting disc, we go along the outlined contour and make a shallow groove, so that in the future it will be convenient to saw with a grinder. The sawn lid is carefully filed along the edges, because after cutting out there are irregularities and notches left, we remove them. Next, a rubber seal is put on the door and frame. Furniture hinges are installed so that the bar door opens and closes. Shelves are made of wood inside, depending on what you are going to store there)
Let's take a look at what exactly is needed to make a mini-bar from a canister?
Materials
- canister 20 l
- rubber compressor
- board 10-15 mm (for shelves)
- loops
Tools
- boring machine
- bulgarian (angle grinder)
- drill
- screwdriver
- marker
- ruler
Step-by-step instructions for creating a mini-bar from a canister.
The first step is to prepare a canister, preferably 20 liters. 
We outline the outline of the future door using a marker and a ruler. 
We glue masking tape and draw the line again. 
We pass along the outlined contour with a boring machine. 
We saw through the groove. 
Then we cut it out with a grinder. 
Here's what happens. 
We process the removed door with a file. 
We put on a rubber seal. 
We put the door on the hinges. 
Next, we make wooden shelves. 
Here is the author's mini-bar, you can store small things and objects in it, for example, the author adapted it under the shelf for his camera. Now let's watch the video and consolidate the material covered. Enjoy your viewing 😉
Every man at least once in his life dreamed of his own mini-bar in the house. A place where alcohol, cola and other drinks would be cursed. It's not even a matter of practical considerations. It's more of a question of aesthetics. But, as they say, the taste and color ...
An ordinary 20 liter canister was taken as a basis. The canister is new (not used). A fairly large hole was cut in it, from the front.
The store bought the simplest loops, 2 pieces. They are fixed with rivets.
On the other hand, the cover is fixed with a clip. Everything is extremely simple.
The lintels were cut from wood to size. There are 4 sections in total. The largest is the cola section. It fits five cans. Further one section for cognac, another of the same size for soft drinks in a can. And one more big section for Jack Denels cognac.
For the decor, a door was made of mesh, a hook was installed to fix a bottle of cognac.
Here's a mini bar turned out. We have it hanging on the wall in the garage. Quite an interesting thing. Always attracts the attention of guests.
We will send the material to you by e-mail
A do-it-yourself mini-bar can be made from any material at hand. Various boxes, deep forms, cans and much more will serve as a basis. HomeMyHome editors in today's publication will tell you about the configuration and production features of this miracle device. It turns out that this little thing can be very useful.
The minibar can store not only alcoholic drinks, but also soft drinks, as well as some dishes
PHOTO: masterclub.online
The design of this product can be complex or simple. For example, sometimes the owner of the house cannot find a suitable option to match the finished interior. Perhaps there are too many departments inside, or, conversely, compartments allow you to store something that is not needed at all. Therefore, there is a desire to make a bar yourself. Let's decide what it is needed for:
- This design attracts attention wherever it is located. Sometimes not everyone will guess what is inside. Accordingly, such an instance plays an aesthetic role in the room.
- The device is designed to store expensive alcoholic drinks or refreshing invigorating cocktails. They are relevant at business meetings and holidays when guests gather in the house. Storing drinks in the refrigerator is irrational.
- Even homemade wine will not spoil if stored in a dark place. As a result, the taste of the drink from the correct content will only be better, more interesting and more refined.
Of course, a mini-bar in the house will be in great demand if there is at least one of the listed factors. At the same time, it is important that the design has several shelves and compartments for placing bottles.
PHOTO: kreuzwortraetsel.me
Features of the mini-bar in the apartment
When trying to create a beverage storage design yourself, the question of size and design arises. As a rule, an apartment does not require too large a bar. Agree, it would be inappropriate to install a structure in the room that is completely inappropriate in design. As for the design features, they try to dwell on a few points.
PHOTO: pinterest.nz
Equipment
The bar must contain sufficient inventory for ease of use. Therefore, you still have to spend money and buy the following parts:
- shaker;
- jigger;
- mudler;
- steiner;
- bar spoon.
In case these elements are present in the kitchen, you can do without them, but it is better to create a separate set in the bar cabinet for the living room.
PHOTO: podelki.org
As for the standard set of wines and drinks, only those products that do not require a low temperature can be stored in the bar. Among them can be red and white dry wine, live beer, homemade liqueur, longers, aged cognac and whiskey. It is always allowed to dilute this assortment with soda in cans.
PHOTO: gtrltd.biz
Location
The alcohol cabinet can be placed in any room. More often it is installed in the living room, hall, hall and other rooms where guests are received. If the structure is small hinged, then it can be placed on a wall where there is no decoration. Perhaps it does not perform any decorative function at all.
PHOTO: crumbsdoughnuts.com
There are bars that are spectacularly located in the corner of the living room. Such models have exactly an angular design and may differ in a rectangular frame, while the storage niche itself will resemble the shape of a ball or circle.
On a note! When making a mini-cabinet for alcohol, you must first determine the place where it will be installed. Based on this, it is already determined with the size and shape of the structure.
PHOTO: tytmaster.ru
How to make a mini bar
To create a beautiful wine shelf you will have to work a little, but first, decide on the choice of option. Each of them has its own separate instruction. Let's consider each type of bar in more detail.
PHOTO: pinterest.ru
Floor bar-globe
Despite the unusual shape, creating a globe bar with your own hands is not difficult. To perform such a storage, you will need a large globe, plywood or thin board, a jigsaw, a locking element. Work is performed according to the instructions.
- Take the globe and remove the extra parts from it: the axis and other components. Saw it in half with a jigsaw.
- Measure the cut diameter and cut the exact same circle out of plywood, make cutouts for the bottles in it. They can be made in different shapes.
- Be sure to cover the sections with electrical tape. This will prevent further cracking and destruction of the material.
- At the bottom, cut a circle with a smaller diameter than the first shelf. It will serve as a support for the bottles.
- Snap on one side and hinge on the opposite.
PHOTO: globusoff.ru
It remains only to attach the globe to any wooden frame. A regular coffee table can also be used for this. You can also create an individual version of the floor stand with additional tiers of wooden beams and build a mini bar counter. They can be further varnished or painted. Such a frame is assembled with the help of and or small studs.
PHOTO: rozetka.com.ua
Table mini-bar
A table-top do-it-yourself home bar can be built in a variety of ways. For this, materials at hand are used.
Barrel-shaped mini-bar for home
All that is required for work is an old small barrel, a grinder, paint, scotch tape. This will be a great alternative to a mini-bar made with your own hands from wood.
| Illustration | Action Description |
|---|---|
 | Remove one ring from the barrel and sand the wood thoroughly. Then put the top ring back in place, and perform the same action with the bottom of the barrel. |
 | We cut off excess parts of the boards near the lower and upper rings, grind the sharpness and burrs |
 | We screw in self-tapping screws to strengthen the rings. Next, cut the hole with a jigsaw in the middle of the barrel. Grind all the irregularities again |
 | We clean the inner walls, then we glue the wooden barrel body with mounting tape without touching the rings. We paint metal parts from a spray can |
 | We paint the future mini-bar from the outside and inside |
 | We take a thick board, you can chipboard, cut out a circle from it with the same diameter as the inside of the barrel. Insert inside and secure with self-tapping screws |
 | On narrow bars we make holes for the bottom and neck of wine bottles. Then we paint these details |
 | Cut the coasters to size and insert them inside. You can arrange niches in one or two rows |
Home mini-bar inside the locker: video
This section is for those who do not want to bother with finding suitable materials to create a cabinet for storing alcoholic beverages. Consider how to make a bar cabinet for your home in the video below.
Canister minibar
To make a mini-bar from a canister with your own hands, it is better to use a metal structure that has not been used for a long time. Alternatively, you can buy a new one. An accessory is made according to the following algorithm.
- Prepare the necessary inventory: grinder, screws and screws, latches, seals, inner lining and other materials that can be interchangeable.
- Measure the future door and cut it out with rounded corners, for this use a nylon cover.
- Glue a rubber seal to the cut edge around the entire perimeter. It will serve for safety and tightness.
- Install rivets on the side where the door will open, paint the interior space in a dark color.
- Additionally, it can be sheathed with any convenient material: the remains of the lining, wood or plastic.
PHOTO: vsesamodelki.ru
When performing interior decoration, keep in mind that the structure should not turn out to be too heavy, otherwise you can forget about mobility.
Minibar for alcohol inside the suitcase
To restore the "grandma's" suitcase for travel, you will have to use various options for decor, locking devices and much more. This storage can be large, stationary, or small, portable. We offer several interesting DIY options for decorating a bar for your home.
PHOTO: novate.ru
PHOTO: novate.ru
PHOTO: hipsterpride.me
Interesting design ideas for mini-bars with photos and descriptions
In addition to the main types of bars, other equally chic options can be made. Many of them have excellent functionality, they help to store various things, including alcoholic beverages.
PHOTO: hipsterpride.me
To create such a bar for your home with your own hands, it is recommended to use reinforced plastic material. It is more rational to make a retractable tabletop for this design from wood of sufficient thickness.
Anyone who has a canister idle in the garage can find an interesting application for it. Let's make a mini-bar out of it, which will be a stylish interior decoration.
To purchase such a bar from a canister and write to the mail
I will make a mini-bar from the most popular volume - a 20 liter canister. Shelves will be located inside. During the manufacturing process, it occurred to me that it can be used not only as a mini-bar, but also as a first aid kit, tool cabinet, key holder and even a safe :)
What we need:
- canister
- drill, grinder and saw
- door seal
- boards
- freezing screws, bolts and nuts
- paint
- fittings
We wash and mark the cutting line for the door
Rinse the canister well and dry. I rinsed with water and blew with air, in the absence of a compressor, it is enough to leave it open until it is completely dry. Before working with a grinder, make sure that there are no gasoline vapors inside, otherwise you risk not finishing the minibar and be left without eyebrows.
We remove the internal dimensions of the canister for the manufacture of shelves
I planned 2 compartments for bottles and 3 for glasses and mugs. We saw the boards and assemble the structure. This will require self-tapping screws.
I painted the inner walls of the canister with black matte paint.
To make the shelves fit into the overall style, I use the wood firing method. I burn with a gas burner. As soon as the wood cools down, I varnish it.
Painting the canister outside
While the shelves are drying, I move on to painting the canister. Before painting, it is advisable to sand the canister with fine sandpaper to improve the adhesion of the paint to the metal.
You need to paint in several stages. Preferably in 2-3 layers, letting each layer dry.
Fittings installation
On sale you can find a variety of things made by skilled people from improvised means. For example, a very interesting idea is a canister converted into a bar cabinet. It looks impressive and costs the same. At the same time, such a thing can be done by yourself, so that it meets exactly your requests and needs. In bars, the door usually opens downward, which may not always be convenient.
Below are instructions on how to make your own canister cabinet with height-adjustable shelves. The location of the shelves depends on the purpose for which the cabinet is intended, for example, the combination below is suitable for photographic equipment, but you can adjust it to suit your needs.
Required materials and equipment
To work, you need the following:Materials:
- Old, washed or new canister.
- Boards.
- Loops.
- A pen.
- Rubber compressor.
- Screws, bolts and nuts.
- Dremel with cutting disc.
- Angle grinder with cutting disc (grinder).
- Band saw (or jigsaw).
- File.
- Marker, pen.
- Angle ruler (optional, ruler will also work).
- Sandpaper.
- Plane.
- Bench drill or drill and drill.
Decide on the size of the door
Before you start cutting the door in the canister, it is worth deciding what size it should be. With the help of a marker attached to the square, you can outline doors of different sizes and choose the most suitable one. In the example shown, this is 30 mm from the edge of the canister.
In order not to accidentally erase the line drawn with a marker, you can glue it with translucent adhesive tape, and draw a thinner line on top with a pen, along which it will be more convenient to cut.
Cut out the door
The door can be cut with a dremel or grinder.
The second option may be faster, while the grinder leaves a wider slot, because it has a wider disc. Since it is planned to stick a rubber seal on the door and the edges of the opening, this will be a more suitable option. When using a grinder, you will most likely need help to secure the canister.
In the final step, it is more convenient to use a dremel to cut rounded corners. When cutting metal, you need to be very careful with sharp edges in the cut. Use gloves and file the edges.
Rubber seal on the door and tailored to fit
Stick the rubber seal around the edge of the door and check if the door is tight. If necessary, cut and adjust corners with a dremel and file.
Determine the dimensions and location of the shelves inside the canister
Now you need to make the inner shelves for the cabinet. Consider its design depending on what you plan to store in it. The picture shows a layout suitable for photographic equipment, while the entire structure can be further disassembled and redone, since a lock connection is used for assembly.
The internal dimensions of the canister may vary slightly depending on the manufacturer, so you are better off using your own measurements. You can use a design program like Autodesk Inventor to simulate the final result and imagine how everything will look like.
We make shelves
First of all, sand the boards. In this case, the boards are 12 mm thick. Then, using templates, mark the shelves on the boards. To cut them, it is best to use a band saw. Because this canister has a notch in the middle along the narrow side, it was necessary to cut a hole in the shelf using a drilling machine. Also drill a hole for connecting to the support posts in each corner, 6 mm from the edges, 3 mm wide and 8 mm deep. When securing the shelf with a clip, place a piece of wood between the clip and the shelf itself to avoid damaging it.
Careful sanding of the edges and joints will be required to accurately fit all parts to each other and to the size of the canister. Remember that sanding is best along the grain of the wood.
Finally, you need to cut the vertical posts. To connect to the shelves using dowels, make holes at the ends of the posts 12 mm deep, 3 mm in diameter (then the mount should be 20 mm long).
Preparing and installing the door
Find the right hinge for your design. After measuring the width of the stitches and determining where you want to attach them, make a mark using a nail or something sharp. One of the options: hinges at a distance of 15 mm from the edge of the canister, at a height of 100 and 270 mm.
To avoid the wrong hole location, start drilling using a thin drill, preferably 1 or 2 mm in diameter, and then install a thicker one that matches the bolts you bought.
Install the hinges and cut the seal if necessary. It is now easy to determine the location of the holes on the door by attaching the door and placing it in the desired position. Drill holes on the door as described above and attach the hinges to it.
Last but not least, attach the doorknob to the desired location. In this case, it is installed 45 mm from the edge and 180 mm from the bottom edge of the door.
Assembling the shelves
Finally, you need to collect the shelves for the cabinet. It will be easy or difficult depends on how intricate design you come up with.
Fill your locker and enjoy
Think of where you will store the awesome locker. The most important thing, of course, is to find a place where he will be in sight, and you can proudly show everyone the creation of your hands.