The armchair bag is a comfortable frameless furniture that is not only adults, but also for children. The product will perfectly decorate the indoor interior of the children's room, bedroom or living room. The chair is convenient because of its compactness and low weight. If you wish, it can be transferred to another room, remove into the closet or transport the car of the passenger car. It can be done independently. Use the master class to make a chair-bag with your own hands.
These frameless chairs are characterized by the main advantage - the lack of a rigid frame. In the classic version, they have a shape of a pear or drop. To select the design, you can view the photo. As the basis, you can use the ball or a monophonic bright fabric.
Furniture is represented by a bag with bulk and soft filler. It seems to imitate liquid. The effect appears, similar to when water is located in the domestic case.
Furniture acquires the body shape of a sitting person, evenly taking on his weight. After a couple of minutes you will feel the muscles and the body relax, the load from the loin is removed. Additional warming effect gives low thermal conductivity of the filler.
Among the main advantages of the chairs, the following can be allocated:
- Through the use of the bulk filler, the level of comfort increases;
- Frameless furniture is suitable for children, as it does not have sharp corners and differs in environmental safety;
- Soft seats are very practical, since they can be moved without problems in the process of washing the floors;
- Children's chair fits perfectly into the interior with the right choice of the model;
- To support the order, it is enough to wash the removable case.
If you planned repair work in a room or a complete design change, you should not throw out the armchair. It is enough to glue the filler and sew a new case to come up to a new interior solution.
On video: How can I use the chair bag.
Production of the chair (MK)
How to sew a chair-bag with your own hands without mistakes? Observe the design of the product. It includes two elements - external and internal covers. Foam balls or polystyrene fall asleep into the inner case. As a material uses a conventional coil or lining material. A small zipper should be on the bag with the filler. This will allow replacing the balls when the previous ones will sound from frequent operation.
The external cover is fixed with a lightning and a small handle so that it is convenient to carry the chair around the house. Creating a chair-bag with your own hands on a master class, consider that you need to choose a dense and resistant material. Among them, you can choose a cloak, a skin substitute, jeans or a cordial tissue.
The following materials are used for work:
- filler in the amount of 300 l;
- textiles for the inner case in the amount of 3 m;
- two zippers, the length of which is 40 and 100 cm;
- the material for an external cover is about 3 m.
Before making a chair, do it yourself, patterns are transferred to millimeter paper. You can do without it, if you can make the pattern on the cloth with soap.
Filler
Usually apply foam balls or polystyrene granules. This is the simplest and most hygienic material. Balls do not absorb sweat, odors and dirt. It is ideal if you plan to use frameless furniture in the dining room, in the kitchen, in a showroom or cafe. As for the polystyrene foam, insects are not emerging in it and it is non-hygroscopic. The kettlefit from this material is easy to sew and is the most affordable in value.
Do you think how to sew a pear chair using natural materials? When choosing an organic filler, the furniture can be used indoors in which low humidity. In the reverse case, bags after stitching will begin to mold. You can use the following natural fillers:
- horsehair;
- wood chips;
- pooh, feathers or wool;
- millet, rice or peas;
- seeds, buckwheel husks or grass.
If you plan to sew a bag of a bag on the pattern of wood sawdust, consider their quality. Filling a pear with your own hands, inspect the chips. From it you need to remove all the sins, otherwise the probability of obtaining a discharge or scratch remains. The easiest way is to use cedar chips. Its smell is pleasant, but scares insects. Also, this filler has pronounced healing properties.
Important! The pear armchair made from the fluff can provoke an allergic reaction. Do not use it for the children's room and do not plan it sewing for a person's room with allergies.
Stages of work
The appropriate model of the frameless armchair can be found on numerous photos. Then use the easiest of the existing method of crossling the product. In the presence of materials you can quickly cope with the work. The following step by step instruction applies:
1. Pattern. Before you start creating a frameless chair with your own hands, make a pattern. Find the appropriate option, transfer it to the cloth with maximum accuracy. Do not forget to outline the allowances that will be needed for the seams. Transfer the bag seating pattern, saving space. This will spend less tissue. At least 1.5 cm leaves on the seams so that they do not break due to the strong tension of the material. For each cover, you will need 6 wedges. On one hexagon or a circle will be required to the bottom and top of the product for each cover.
2. Formation of an external cover. After creating the pattern for the armchair of the bag with your own hands, go to stitching. Fold two wedges together so that the front sides were inside. Purge 15 cm from below and from above, so that there is a place to cross the 100-centimeter lightning. We are noting a lightning and sewing her machine. Another wedge joins one side and shots are stored. Sew other details in a similar way. After that, it sews the base with the bottom.
3. Formation of an internal case. This cover sew is similarly. But the exception is zipper, the length of which is 40 cm. Stop at the bottom and on top of 45 cm.
4. Putting. Go to the latest step. If you use artificial material, stuff your bag in the respiratory mask. Fill the case on 2/3. So the chair is softer.
Thus, using this phased plan, you quickly handle work. Just buy the necessary, make the pattern easier and sew the items. The resulting product must correspond to the design of the room in which it is planned to be used.
Recently, latter popular furniture began to gain great popularity. A bright representative among this type of furniture is a chair bag or it is also called a pear chair.
How to sew a chair bag: master class
Before moving to the process itself, let's figure it out with features. The chair itself consists of two parts: from an external cover and internal.
The external case must be equipped with a long zipper and the desired small handle for carrying a bag of the apartment. It is also worth considering that it is worth to give preference to dense and wear-resistant materials. It is best to make a cover from cloak, cordial fabric, leatherette or even jeans.
The inner case will be filled with small foam balls or simply a polysterol. Material You can use a lining or conventional cooling. Also, do not forget about a small zipper to fill the bag and subsequent packing in case of crushing the balls (after some time).
The dimensions of the future bag - 120 x 90 cm.
Materials for work:
- Fabric on the inner case - 3 m
- Fabric on an external case - 3 m
- Lightning 100 cm
- Lightning 40 cm
- Filler - 300 l
Before making an armchair with your own hands, you need to take all the details of the seating pattern with a millimeter paper. But it is possible to do without it, and with the help of chalk or soap to move the details immediately on the fabric.
Pattern
To simplify the question of how to sew a chair Bag: Pattern is given with all sizes.
Stages of work
After the pattern is transferred to the fabric, you need to mention the allowances for the seams. They must make a minimum of 1.5 cm to avoid breaking the seams. If the fruit fabric, then the edges of the cuts are better to handle the zigzag lines.
Wedges for the chair need to be cut in an amount of 6 pieces for each cover. Hexagon for the top and bottom - 1 details for each case.
Approximate location of the pattern on the fabric:
We begin assembling the details of the external cover.
The first two wedges fold together in such a way that the front side is inside. Taking into account the zerching of zipper 100 cm we flash from below and on top of 15 cm. Then we take the lightning and sew it with the help of the machine.
We join the next wedge and roaring the seam on one side. We also act with the other details of the base of the chair. To fix breaks on the seams, on the front side of the cover we make a line at a distance of 1 cm from the seam. The line is best done using the maximum line size of the machine (4-5).
Then sew the base and the bottom of the chair.
Go to the sewing of the inner case. The sewing process is similar to sewing an external cover, with the exception of zipper 40 cm. To do this, from above and below, you need to firm 45 cm.
After the inner case is ready, go to the packing with the balls of the polyterol. Be extremely neat with this material, since his hit in the respiratory tract is fraught with serious consequences. Do not neglect the use of a protective mask from the pharmacy. Fill the case about 2/3 of the total bag so that the chair is soft.
To the above-described work process, I also make a small video lesson on the sewing chairs.
- do not use too large foam balls, as they will sleep very quickly, and the chair will need to be stuffing very often
- the use of cheap chips from foam is also undesirable, as this is a product of the secondary use of the waste packaging foam. It is better not to risk your seat does not have an unpleasant smell.
- use to work with the Watman Polystertrol, rolled into the pipe. So you can avoid sticking balls to the hands and to the surrounding subjects.
In the article, I will tell you about creating the original chair. How to sew it yourself, what material to choose. I will describe the properties of fillers, which is beneficial, and which is better not to apply. Sick the sewing process, and explain the features of this furniture.
How to make your own armchair
Chair bag, air pouf, bin-bad or pear - frameless, comfortable, comfortable furniture. Inside the fabric bag there is an elastic filler. Because of its simple design, it is possible to sew it alone, even without having basic skills of the seam.
Frameless furniture is manufactured in 3 types - in the form of a drop, ball and pear. For each option, drawings, materials, tools and filler are used. It is necessary to determine the choice of furniture shape, spread the drawings, prepare the material. Then connect the cut parts of the material, and fill.
Selection of material
The color of the material is its method depends on the selection of the master and drawings.
It will take 2 types of material - for an external and hidden cover. Hidden bag sew from:
- polyester;
- satin, cloak;
- mattress fabric;
- tISI.
These fabrics are not expensive, possess high strength. Outdoor case sew from tapestry, artificial leather, Shenill. Fabrics are pleasant to the touch, are not subject to rapid pollution.
The selected material should breathe. There must be an opportunity to remove the case, and replacing the filling. Lightning is sewn into both bags.
Filler
Natural filler can cause allergies.
The polystyrene foam is a high-quality filler for frameless furniture. But durability is distinguished by a mixture of silicone balls with polystyrene foam. This mixture is made independently. If the polystyrene foam is bought for a low price in large volumes, then silicone is ordered on the forums, and delivery takes 2-3 weeks.
Filling from polypropylene and hollofiber are also used for pear chair. Polypropylene restores primary state, holofiber is mixed with polypropylene to improve softness. A mixture of fillers has water-repellent, and antibacterial properties.
In addition to synthetic filling, rice or beans are poured onto the bottom, which absorb moisture. Adherents of environmentally friendly products are stuffed with a bird in a poultry, a mixture of sawdust, horse hair. However, the bird fluff can be damed, and get into the lumps, the wooden chips seeps through the cloth, and causes inconvenience.
Required tools
It will take a standard seamstyle set:
- scissors, centimeter, lightning;
- millimeter, needles;
- reinforced or silk threads;
- sewing machine, Overlock;
- chalk, pins, pencils, thimble.
Overlock buy, or make to order in Atelier. Thrust protect the fingers from the needle injections.
Creating patterns
Standard external bag sizes - 90 cm diameter, length 250 cm.
Per millimeter paper is drawn bag parameters. Pouch for filler sew for 2-3 cm less. The diameter of the circle is 70-72 cm. The bottom circle is discharged in a quarter of the size, then when cutting the fabric is folded. The upper circle is done less than 20-25 cm. The item is drawn entirely, and leave the allowance for a pair of lightning. The allowance is 1-2 cm for side wedges.
Details are drawn from the inside of the fabric, they are compact.
Turning process
The pattern from millimeters is transferred to paper, cut out. Next, they are driving in chalk on the inside of the fabric. First draw the size of the pattern, then the centimeters are noted on the allowance. Cut parts with an allowance. It turns out 6 lateral parts for the inner and outer bag, 2 parts of the lower and, 2 parts of the external circle.
Cut parts fasten with pins, crosslinking, overlit. Details of the lower and upper circle are aligned separately, leave the place for lightning. Sometimes zippers are placed on the side parts of the bag. Stitching the whole design, paste the typewriter. Then stitches lightning. Locks are dumped with double seam for strength.
In the external place internal, and only then clog the filler. Before the failure, the product is not recommended, the chair takes the silhouette of the saddle.
Several silica gel bags are put inside to assemble the smell of filler.
Features of the sacchair features
Frameless furniture has durability, and is designed for the utmost mass of a person - 100-150 kg. Depending on the model, the chairs bag sew one-layer.
Dimensions of furniture with independent sewing can be corrected independently. In addition, sew the chair itself is more profitable than buying on the Internet. Puff use as a gift.
Such a piece of furniture is enough just to sew your own hands. It is necessary to purchase material, filling, tools for sewing. For a long service life, a synthetic filler is chosen. The finished product is placed in the living room, children's, in the personal account or library.
The cover is sewn under the interior of the room, then the question will not arise with the determination of the location of the frameless furniture in the house.
The most important thing in the creation of a frameless armchair is a pattern, tested by many and ready to transfer to the fabric. The Chudo Chair team offers you a few options for leaking comfortable and easy to sewing bin-run.
Let's start with simple?
"Geometric" chairs
The patterns of frameless furniture in the form of an ordinary cube do not need a view: the only items that you have to cut are squares. Completely identical, in the amount of 6 pieces. Do not forget to put the zipper when assembling!
Few is more difficult to make cylindrical, the pattern of which is presented below.
The diameter of the seat is not for nothing exceeds the diameter of the bottom - this design will allow the bag to "be forked" without tensioning the fabric of the cover. Long service life is guaranteed!
Pattern of the chairs bag "Pear"
The pattern also does not look very difficult. The "petals" of the case can faster on the base in the form of a hexagon (as in the figure) or on a completely round item. In the latter case, the construction of the pattern and the assembly of elements will be more difficult and will require the presence of at least the initial sewing skills!
Bin-run in the shape of a ball
To fulfill the dream of a real football lover (and no matter how old he is!), You can, stitching 32 details in the form of small pentagons and hexagons more. Yes, the pattern was fitted only in 2 geometric shapes.
Ordinary chair
Finally, the option is more comprehensive. The chair-bag, the pattern of which is presented below, does not resemble a sports inventory, nor fruits. Most of the whole product looks like ... Ordinary chair!
Product assembly is very simple:
- 4 lateral parts are sewn between them;
- sewing bottom (do not forget about zipper!);
- the facial item is sewd.
Any of the extras presented will be finalized by itself - the basic options are designed to be experimenting!
If you failed to make a chair bag yourself - do not be discouraged. You can always in our online store.
Since its appearance on the market, frameless upholstered furniture has won a solid place in the interior of residential premises. The brightest representative of this type of furniture is the bag. It can also be found in libraries, movies and even parks. None of the sofa will not get so convenient as on this design. An additional plus of this type of furniture is not to make a car chairs with your own hands.
Chair bag, binbeg, pouf-name - titles from a soft frameless chair a lot. Not less than his varieties. It may have a different form:
- square or rectangular;
- pear shape;
- circular;
- in the form of a flower, any fruit, heart, washers, etc.
The choice of form depends only on the preferences of the future host of the chair. As a filler can be used:
- polystyrene balls;
- beans, peas;
- chips, sawdust, feathers.
Purchase any of the fillers is easy. The most preferred is polystyrene foam. It does not cause allergies, cannot be molded, attract rodents or insects. For a country house it is better to use only it. In addition, the soft otfik filled with them will be particularly comfortable - it will take a comfortable shape for a person sitting or lying on it, and his granules, unlike beans and peas, not at all tough. It is better to choose small balls, as the major quickly sleep.
The volume of the padded material depends on the size of the chair. On a chair for an adult, you may need 250 to 350 liters. It is better to purchase 400 liters of polystyrene. The residue is useful for the future, since in the process of operation, the material is frozen and approximately once a year it can be shred.
The appearance of the pear armchair made by their own hands determines the material from which it is made. The fabric may be the most different. First of all, it should be durable and practical. It is better if it can be washed in a typewriter. Due to the variety of materials made by their own pouf's hands can fit into any interior. For a laconic, strict style, classic or modern design, bags stitched from leatherette, artificial fur, velvet, velor are suitable. For the nursery, you can choose a cloth with pictures, bright colors.
Before you begin to study the issue, how to make a chair-bag with your own hands, it is worth deciding on the design, shape and size of the structure. This depends on the amount of tissue, filler, other materials that will need to be purchased.
What do you need to work?
In order to make a soft chair with their own hands, the following materials are needed:
- lining fabric;
- fabric for an external decorative case;
- filler;
- durable colored threads for sewing;
- two zippers for fastening covers;
- millimerary paper for drawings.
Purphic bag lining fabric, made by hand, should be durable, even rough. You can take an old duvet cover or pillowcase, which are no longer planned to be used (provided that the fabric is a whole, without scuffs and holes). The tissue and snake for the main cover must be selected suitable for coloring the color of the color.
From the tools you need to prepare:
- Sewing machine;
- Ruler, pencil;
- Scissors.
If there is no sewing machine, and take it to make the emission itself there is no desire, then you need to prepare a thick needle for seamless, durable threads, thread. In this case, the process will be much longer and time consuming.
The main stages of the manufacture of the chair
Clearly demonstrate how to make the otfik, maybe a master class on a soft chair with your own hands. You can consider the most popular version of the armchair bag in the form of a pear. This design is convenient because it has a peculiar back, which gently supports the neck and head.
First of all, the pattern of pear armchairs is needed. It consists of a round or hexagonal base and four or six petals. The combination of elements may be different, but these options are the simplest and most common.
Click to enlarge
With the preparation of the pattern for the chair-bag and work begins. The drawing of all parts of the covers should be performed on a scale of 1x1 per millimeter paper. Thus it will be clearly seen how much fabric is needed for your hands made by your own hands.
To increase or decrease the size of the future chairs, if the specified in the pattern is not suitable, on paper, all the measurements of parts need to be changed to the same value of centimeters.
Having draws the scheme on paper, the parts are cut out and, fixing the pins on the tissue, cut off its contour, leaving the allowance (about 1.5 cm of the fabric after the part bound). When crosslinking elements, the allowance ensures that the chair does not spray on the seam.
Then it is necessary to sew covers on the typewriter or manually, to enter lightning. Lightning in the inner case allows you to conveniently fill it with polystyrene foam and add it hereinafter. The snake of the external cover is needed to remove it for cleaning or washing. The locations of the details should be strained on the typewriter, and the external cover also makes a large seam on the front side.. Then you need to smooth out the iron. You can set the handle to the chair for ease of carrying.
After the covers are ready, the filler can be filled. If it is a polystyrene foam, then it is necessary to do it carefully, as it is very much electrified and does not fall asleep carefully, but scattered around the room. You can insert a package with the material inside the cover, cut it and carefully pull out, holding the edges of the zipper. You can also build a funnel from a plastic bottle or paper and pour granules through it.
Fill the cover should be so that it keeps the shape of the pattern, but did not score it to failure, there should be another empty space for the most comfortable effect.
At the end, the external, zipper is put on the inner case. The chair made with your own hands at home can be considered ready for use.
Care of the finished product
Made with your own hands The soft chair will serve for a long time if it takes care. The variants of this care depends on the material from which we sew the main cover. Not all fabrics can be washed in a typewriter. This should be found in advance. For children, it is better to choose practical fabrics that can not be pathered.
The design stuffed with foam balls is less conspicable than in the case of other fillers. The chair filled with everyone, in addition to expanded polystyrene, requires periodic replacement of filler due to the following reasons:
- Dampness can lead to the formation of mold;
- Some natural materials, losing, are not simply reduced in volume, but form a dense layer to be deleted;
- The appearance of insects inside the upholstery will entail the replacement of the entire filler and special processing of covers (internal better change).
- Polyfoam is also compressed over time, but in this case it is enough to add a new one, and the emblem will again acquire the previous properties.
Turning a ready-made soft chair for the first time, you can immediately understand correctly it is done or not. If the body does not fall to the floor, and falls on the packing and is softly enveloped from all sides, then the proportions are designed correctly. Errors can be corrected by the ears of the cover or adjusting the amount of filling material. A well-received pouf is so comfortable that for sure every member of the family will want to have his own.