The need to protect housing from mosquitoes to varying degrees is present in all regions of Russia. Especially relevant in the spring, when the need for heating has already disappeared, and turn on the air conditioners early, and the windows of the windows most of the day are in the open position.
The most efficient and safe for tenants is mosquito protection - mechanical, that is, equipping window and, if necessary, doorways, devices with mesh canvas that prevent insect penetration from the street.
These fixtures are produced different types of design, functionality and, accordingly, the price.
Equipped with a mesh window pastes
Given the simplicity of technical execution of the protective devices of the budget class, consider how to make a mosquito net yourself.
In addition to the function of the barrier on the path of insects from the street in housing, these protective devices must capture garbage and, partly, dust. To effectively cope with these tasks, mechanical means of protection against mosquitoes, called mosquito nets, should have the following characteristics:
- the functionality of the mesh canvas is the provision of obstacles for insects and garbage while maintaining sufficient light and air permeability, partial dust capture (especially relevant for the lower floors);
- ecology is the lack of harmful discharge into the environment;
- sufficient strength and resistance to weather conditions - wind, humidity, high temperature, ultraviolet rays;
- safety operation;
- simplicity of everyday care;
- aesthetics.
In some cases, this list can be complemented by other properties, such as compactness, increased strength ("anticress", anti-hyperification), etc.
Production of simple protective devices
One of the two main components of mosquito protection (with a slad design) is a frame that determines the geometry, dimensions and rigidity of the structure. The quality and durability of the protective device depends on the quality of the frame profile.
The second, no less important component of mosquito protection is a mesh fine-skinned canvas, from which the selection of materials begin, regardless of who manufactures the device - the owner of the housing or a foreign contractor.
Selection of mesh canvas
From undergraded means with similar characteristics, gas fabric, gauze, old tulle curtains, fiberglass grid (painting reinforcing) or finely protected construction from steel wire are possible.
Small fiberglass and steel woven mesh
The most environmentally friendly, but the least durable of the listed materials is a march (finelyeful cotton tissue tissue), which is rapidly polluted and stretched, has a low degree of transparency, decomposes under the influence of bacteria and is easily rushing under random load. Marla to equip window openings can only be used as a temporary means of protection against mosquitoes somewhere in the summer kitchen or a summer cottage.
Anti-mosquito protection: on the left - from Tulle, right - from gauze.
The remaining healthy material also have individual disadvantages, but more suitable for the protection device from mosquitoes. The construction fine steel grid (woven) made of thin wire with an anti-corrosion coating has proven well.
Mesh canvases manufactured specifically to protect against mosquitoes are made from Fiberglass, polyester (Capron), polyester, nylon and steel thread.
The optimal choice of their these materials is Fiberglass - a mesh of light fiberglass coated with polyvinyl chloride (PVC), durable and non-combustible, with a high degree of transparency and resistance to all atmospheric factors.
Anti-mosquito canvases: Left - from Fiberglass, right - from polyester.
In second place in popularity after Fiberglass, there is a polyester - durable, durable, but widely affordable material.
The size of the mesh produced by the mosquito net is in the range from 0.5 to 1.2 mm, and when the mesh canvase is selected, the material of the middle part of this range should be preferred - 0.6-1.0 mm. There is also a canvas of the anti-til class - a mesh sheet of special weaving with rectangular cells with a width of 0.25 mm, catching the smallest particles weighted in the air, and therefore requiring regular washing.
Installing frameless protection
Not all mileage fixtures without a frame base are constructively simple and easy to do in self-making. For example, in domestic conditions, it is difficult to make rolling (rolled) devices or "grid-pls" of the required level of aesthetic and reliability, so protective accessories such structures are produced in industrial environments.
But to equip the window block with a grid on the simplest fasteners under the power to anyone, and this design of the mosquitosis is no less effective than any other device.
Mosquito net on sticky mounting tape
For such a protective structure, a flexible mesh canvas and fittings for fixation are a dipping ribbon fastener.
Important!In the manufacture of anti-mosquito protection on the tape velcro, it is better not to use a metal mesh - in the working position such a canvas is not aesthetic because of the inevitable irregularities in the plane of the canvas, and its spiny edges after the cut must be processed.
Materials for such a device can be purchased complete by selecting the package with the desired size and color of the canvas, or to buy separately by performing measurements of the window outlet with a roulette.
Frameless mosquito protection: Left - set, right - retail.
If the sash of the window block opens out, the grid will be located on the inner surface of the binding. And vice versa - when the window opens, the protection is fixed outside.
From the window block remove the protective polyethylene tape and the remnants of glue. Having retreated from the inner edge of the window block of 5-15 mm outward, along the profile perimeter, a simple pencil is applied with a line - the inner boundary of the mounting rapid tape. The surface along the line is degreased on the width of the velcro.
The rapid tape is produced with self-adhesive, including the thermoclate, back surface and without it. Therefore, the velcro is glued through the perimeter of the window block box depending on the type of execution - in accordance with the instructions for use.
Important!The hard band of the self-adhesive tape is attached to the window block, and the soft half is on the grid.
Stages of the installation of frameless mosquito protection
In the finished sets to the mesh canvase, it is often sewn around the perimeter soft half of the sticky tape, and it is only necessary to install the hard side of the velcro on the window block. If there is no regular fastening, then it is performed independently - the ribbon is first glued to the grid, having exposed the edge of the canvas so that the edges do not seine them, and then flush the thread.
Station finish of the edge of the mesh canvas by mounting ribbon
It should be remembered that the frameless mosquito device is convenient to use when its internal location. The installation of such a mesh outside is permissible only on the lower floors available to maintenance from the portable staircase, or on window blocks separated by several openings by vertical racks from the profile, with several movable flaps.
Interior and outdoor location of flexible protection
Mosquito net can be installed even easier, even without mounting tape. The perimeter of the outlet in the box of the window block is measured along the sealing gum between it and the sash, and with a reserve of 10% to this magnitude, a twisted kapron cord with a diameter of 4 mm is acquired. It is also selected and the net canvas is also purchased for a size of 5 cm more looting in each direction.
The sealing gum is suited to scold with a narrow stale and removed from the landing groove.
Starting from the middle of the upper side, the edge of the mesh is placed on the slot, on top of which the middle of the length of the cord is stacked. Rope on top of the grid in both sides (right and left) is pressed on the entire depth in the groove, exploring and fixing canvas in it. Installation of the grid is performed in the tension, so that the slab remains on the canvase. Two ends of the cord must meet in the middle of the lower side of the day, where they are joined in the groove under the drop of PVA glue.
Installation of a mosquito net in the groove groove
Excess the bands in the form of a strip along the cord is trimmed with scissors flush the edge of the groove.
To obtain a more complete picture of the described operation will help this video:
Manufacturing and installation of mosquito frameworks of girlfriend
Independent assembly of a protective mesh sash from a regular profile (plastic or aluminum) sensitive economy does not promise, as the components still have to buy in the store. At the same time, the probability is great as the quality of the device collected by their own hands will be lower than that of a professional.
But the manufacture of a fair-quality framework from a cheap fittings, intended for other purposes, will interest many.
Do it yourself collect decent carcass The mosquito net on the plastic window can be made of plastic channels for laying the cable - material of various sizes, color performances and low prices.
Samples of plastic cable channels
Important!The walls of the cable channels have a thickness smaller than that of the regular profile of the sash, therefore, plunger retainers should not be attached to them - it is better to use homemade Z-brackets or corner limiters made of leaf steel with a thickness of 0.5-0.8 mm.
List of essential materials and tools:
- plastic cable channel 15x10 mm or 20x10 mm with a double lock in an amount equal to the perimeter of the light turn plus 10%;
- 4 connecting squares for outdoor docking frame elements;
Cable Channel with Corner
- reinforcing corner lining made of steel, durally or durable plastic - to ensure the rigidity of the sash in the corners;
- mesh canvas with a cell of 0.6 -1.0 mm;
Reinforcing lining and mesh cloth
- exhaust strips with a diameter of 3-5 mm with a key;
- drill with a leap drill;
Sklocker with ripples
- hoven for metal;
- stuslo.
Hoven with web for metal and stub
After removing the sizes from the loop in the window block, the billets from the channels with the lids are cut, performing their joints with a knife at an angle of 45 0 - with a stusl. Removing the cover from the sliced \u200b\u200belements, they are joined on a flat surface, put the reinforcing overlays insight and the holes under the rice are planned. After drilling on the labels, the linings are attached to the channels with rims - the hats outside.
Cutting ends of cable channels and layout them on the plane
To give a greater rigidity, the lining design is better to choose the width of the channel base. If this accessory was not ready for sale, it is possible to make it yourself - cut into a brternal leaf steel with a thickness of 0.5-0.8 mm.
The reinforcing lining - industrial production and homemade installed hats
The finished frame without top covers is placed on a flat surface and covered with a grid. This operation is better to perform threesomes - two hold the canvas in the tension, and the third sets the upper caps by pressing on them until it clicks the lock profiles.
The finished mosquito flap is applied to the window block at the place of installation and the pencil will drive its contour. Then, from thin sheet steel, Z-shaped brackets or corner limiters are made independently. The second option is preferable, since it eliminates the random shift of the sash to the side.
Sketch of the location of corner limiters on the box of the window block
With the external installation of the sash from the cable channel, its durability depends on the quality of the polymer. Cheap channels from ultraviolet and high temperature exposure after 2-3 years are susceptible to cracking.
Conclusion
Do it yourself conscientiously made anti-mosquito The grid on plastic windows to perform the main function - the creation of a barrier for insects is not inferior to industrial devices. With regard to the aesthetics of the device, this criterion depends on the skill of the artist. If there is enough high demands to decorative protection, it is better to purchase an industrial manufacturing accessory. For dacha houses, devices collected with their own hands will be quite appropriate.
The main essence of the article
- Mechanical anti-mosquito devices are the safest way to protect housing from insects.
- Of the such protective devices manufactured by the industrial method, many devices are technically simple and suitable for independent making.
- It is possible to temporarily solve the problem of anti-mosquito protection, even without any costs - from the used submissions.
- The relevance of the application of homemade protection against mosquitoes depends on the requirements for the aesthetics of housing, since the effectiveness of such devices is sufficiently high.
With the onset of heat, everything comes to life in the world. It would seem that romance, feelings, spring, summer, rest ... But in all this there is a reverse, dark and very unpleasant annoying side. Yes, insects awaken with the onset of heat. This is a separate part of the memories of the long-awaited summer.
Is there a way to avoid familiarity with insects
Mosquitoes, flies, midges every day terrorize people. They do not hide under the blanket - hot. They do not run away from them. Scare away? Bad option. All fumigators, pills and medicines from canopy can be ineffective.
The only and right choice is a strong defense. Mosquito nets installed on all open areas (windows, doors, windows) will help to repel the attack of unnecessary midges. But then the question arises about how to make this barrier.
Varieties
Nowadays, the mosquito net gets becoming more and more distribution. Now almost in each window you can find green or blue gratings. The material itself, from which this barrier is made, differs in structure and in quality. For example, there are soft-type grids, there are solid. One cell size is more, others have less. All these parameters affect the quality of protection, bandwidth, grid durability, etc. Also, barriers differ at the place of use. There is a mosquito net on the window. It, as it is clear from the title, can be installed on the balcony frames and in the windows themselves. There is a mosquito net on the door.
This "heavy artillery" applies most often in country lanes. Where the door loops are open all day. No less significant differentiation occurs by the type of fastening. Standardly this hooks for which a frame with a grid is attached, but there are more interesting examples. Recently, a mosquito net on magnets appeared on the market. Very easy to use. There are and grids on velcro. The principle is almost the same, only the materials are others.
Any mosquito net performs its direct functions - insect protection. The remaining additions are available only in order to simplify operation.
Why pay, if you can do yourself
Yes, it is not bad if there is a mosquito net in the house. With your own hands, you can do anything, but when it comes to the manufacture of such things, you need to ask yourself: "And if?". Here you need to think about everything well. Mosquito net is done simple enough. Buying this design is not always profitable. First, make cheaper yourself, it's a fact.
Secondly, sometimes commercial options will not suit the destination itself: a window or door. The mosquito mesh frame is not always suitable for old Soviet openings. Or new, but non-standard sizes. Be that as it may, and a mosquito net, with their own hands, which is not so difficult to make, in some cases it is more practical than purchased. The choice is made, proceed.
Mosquito net do it yourself (option first)
First you need to decide on the type of design. Again, there are many types of mesh barriers. What to choose? To get started, you need to decide on the object.
In this option, let the window be. If it is old, wooden, then with him a lot of porridge do not cook. Due to the windy of the "Upgrade" window, the windows risks thinking. The frame can crack, and then the whole case will come to an end. Therefore, you need to add a mosquito net neatly and according to a specific technique. It is done in two stages. The first is working on the workpiece. Second - installation.
First step
You need to start with the construction of the grid. It will take some material for it. Actually, the mosquito net roll itself, wooden twine (preferably square shape), buttons and small nails. The case is simple and simple. First step. You need to measure the window frame.
From the data obtained you need to take away one and a half centimeters. He will leave for various frauds. The second step is the blank frame for the grid. Wooden twine needs to be cut into the size of the window and connect together with nails. To this basis (using the buttons) attach a mosquito net. The edges of a kind of barrier are better to adjust. So the type of transforming, the product will become neat, the grid will not disperse.
Stage two
Here you have to tinker with the windows themselves. How will the frame be attached? From above and below are two hooks for which the base will go. You can attach them with glue. Since any coarse interference in a wooden window can lead to depressurization. And this is a draft, and swollen from the water frame. Why do you need it? It is important to set the above hooks so that they do not interfere with the closure / opening of the window. And here is a mosquito net to window ready, it remains to connect two parts together.
"Heavy artillery"
The windows, of course, should be protected first, but do not forget about other aisles. Mosquito net on the door will help, especially on very hot days, leave the passage open. So the light breeze will fall into the apartment, and unnecessary insects - no. How to implement this plan? The grid on the door can also be equipped as well as the window. That is, to build a wooden frame, pull the mosquito barrier on it and fix at the bases.
It sounds simple. But not everything is so good. The dimensions of the doorway are much more than the sizes of a small window. It should be remembered. Because of this, the construction itself will be difficult (the frame is huge, so in one place, then the mesh will be liked in the other, and this is already a reason for insects to crawl into the resulting gap). Which exit? The location of the door gives many options. One of them is the most profitable. Mosquito net in the doorway will not be static. Like this? Barrier for insects is better to leave in a stretched state.
Progress
As always, first need to measure the future surface, it is worth adding a half centimeter to the results obtained. The idea is simple. In the grid it is worth doing holes and put special rings on them (such can be bought at any store for needlework). They themselves slam. These rings will not allow the grid to crawl along the seams, which is needed. As for the fasteners, they can serve as the most ordinary nails. Preferably small size. Scheme such. Every ten centimeters will pass the ring. He must match the nail. It should be done high quality and slowly. Otherwise, curvature cannot be avoided.
Alternative options
Installing mosquito nets takes a lot of time and strength. Therefore, not everyone can afford this pleasure. But there are new options that are able to facilitate the process. Mosquito net on magnets is a wonderful alternative to the classic framework. This grid is not afraid of the wind or rain. She will not dare. Only a person can remove it. How does it work? There are two basics. The first is the iron edge. The second is the magnets themselves. It is impossible to make this option yourself: no desired materials. But try to install - always please. The iron frame using small screws is fixed to the windows frame. This is perhaps the whole of the moroka. The rest is the forces of attraction. Small magnets are sewn into the mosquito net. If you attach them to the frame, they will pull themselves. A couple of movements with hand so that everything is tightly pressed to each other, and the installation is finished. At the right moment, this barrier can be removed.
Any mosquito net will protect the house from annoying insects. It is only a little bit to try.
In this article: the appointment of a mosquito net; Mosquito nets for windows; How to independently make a mosquito net with a fastening on the velcro ribbon; frame mosquito net with their own hands; how to choose a mosquito net; Durable window grid "Antikushka"; Care for mosquito net.
With the onset of warm spring days, our homes enjoy increased attention from the army of insects, we will certainly want to master new territories. And nothing if these insects did not interfere with us to sleep in the morning with open, like flies, and did not try to use our bodies as blood donors, which is characteristic of mosquitoes and midges. Of course, it is possible to count on all sorts of fumigators and other chemical means of combating flying aggressors, but the most reliable means of protection will be only a mosquito net on the windows.
Purpose of mosquito net.
A grid with small cells, overlapping window openings or suspended above the bedside down, was used by the oldest civilizations of our Millennium Planet back - it is known that the last Queen of Egypt Cleopatra slept under a gentle mesh canopy.
Mosquito net has become part of our civilization and received its sustainable name not so long ago - in the XVIII century. Using such a grid correctly, i.e. Fully following it by the external atmosphere from airspace inside the rooms, the household is completely protected from the visits of mosquitoes, flies and other insects acting in the role of distributors of various diseases.
Grids from mosquitoes (mosquitoes) are made from polyethylene, cotton, nylon, fiberglass or polyester. To prevent access to the residential premises of mosquitoes and flies, the cell size in the mosquito net should be no more than 1.2 mm, the smaller size of it is 0.6 mm - stops smaller insects, for example, midges. The absolute obstacle for any insects will be a mosquito net impregnated with safe insecticides safe for humans and pets, which include preparations from a group of pyreroids - permethrin or delterine. Such insecticides do not simply interfere with the insect to penetrate the residential premises, they kill them - the effectiveness of the mosquito mesh treated insecticides is twice as low than untreated, while the impregnation of the mesh material by these drugs must be made only twice a year.
Mosquito net is an irresistible barrier for insects, but the overlap of the window and doorways reduces the volume of fresh air entering through them - to sleep in the rooms, windows and doors in which the mosquito is taken from mosquitoes will be hot, because Despite the presence of cells, the grid still reduces air access and that is why it is not necessary to use gauze to protect against insects.
In addition to its main task - creating an obstacle to insects - a mosquito grid is able to block or seriously reduce the penetration of dust, pollen and floss, which allows you to create a more comfortable atmosphere for households exposed to allergies.
Types of window mosquito nets
The mosquito nets offered by the manufacturers of window structures are divided into fixed-fastened (sticky) ribbon, frame, sliding, roll and mesh-pls. Consider the design and characteristics of each of them.
Installation of mosquito mosquito on the tenacuity tenant tape tape is easier to perform - it is fixed inside the window opening, does not interfere with close and open window sash. The grid fixed on the ribbon with the croups is simply removed and installed back, it is easy to wash it, and the lack of a rigid frame allows you to install such a mosquito protection inside the window opening of any shape and sizes. The service life of such an anti-community barrier will be more than two years, provided that accurate circulation, in addition, do not need to look for a place to store a mosquito net, removed from the window at the time of the cold season - it easily takes a compact form.
Mosquito nets on a removable frame from an aluminum or plastic profile are widespread enough. It's all about the simplicity of their installation that makes installation not only on plastic or aluminum frames, but also on wooden, and without any serious damage for the window structure. The most convenient frame for mosquito net will be made of aluminum, since this metal is much stronger than plastic and has a small weight. Framework mosquito nets can be external (outer) and installed inside the window opening. The frame of the external grid is attached, as a rule, to special corners, allowing you to easily install and remove it. Corners for mounting a frame with a mosquito net must be installed before the actual installation of the window frame, since it is not easy to perform their installation after this operation. When mounting the corners, it is important not to be mistaken with the place of their installation, otherwise they will fall under the window quarter - part of the window frame, headed inside the grooves in the window opening - and put the window frame will not work. The mosquito net in the frame, placed inside the window opening, can be installed regardless of the installation time of the window frame - it starts inside the light opening and is fastened with short metal hooks to the window profile on its inner perimeter. Unlike external mosquito nets, especially if one of the window flaps is deaf, installed inside the window opening of the mesh in the frames can be easily dismantled. The average cost of the frame mosquito net - 800 rubles. per m 2.
Sliding mosquito nets can only be installed on aluminum window frames with sliding flaps, they can repeat all the positions in which the window sash is translated. The principle in which sliding mosquito nets work is completely similar to the door of the cabinets - they can be freely moved to the direction to the left, along the perimeter of such meshes are equipped with a sealing pile, tightly overlapping any slots through which insects can penetrate inside the room. For the free movement of sliding grids from mosquitoes, the aluminum profile is used on the horizontal, on the frame of mosquito nets, rollers are attached (skates), facilitating their offset. The main convenience of sliding mosquito nets is associated with the possibility of overlapping those areas of the window frame that are used to carry out at the moment. However, if the aluminum frame has a bough of two sliding flaps, it is possible to completely block the opening from insects only on the inner sash - when trying to close the opening of external sliding flaps, even if they are equally the same width, it will not be possible to avoid 200-300 mm of sides. Sliding mosquito nets are on average 1500 rubles. per m 2.
Rolled or rolling mosquito nets are installed on window openings or from their outer side, or with the inner (most often on the attic windows). When there is no need to place the barrier from insects, the entire plane of the mesh is folded into the cassette installed in the upper part of the window frame, which allows to preserve the strength characteristics of the mosquito net and significantly reduce its wear. Installation of roll grids is made before installing the window frame in the opening, while entering the part of the frame of the frame in a quarter of the window opening. Important moments during the operation of a rolled mosquito net: the possibility of penetrating the solid garbage inside the roll when it is folded, which will cause damage to the mesh; The sharp mesh descent during folding is not allowed - it is necessary to hold the canvas with hand to complete folding; The mechanism of descent-lifting the grid must be cleaned not less than once in 2 years; In winter, it is impossible to use a rolled grid, because Penetration inside the moisture mechanism will damage (however, in it, it is not necessary in winter). The main advantage of rolled mosquito nets - they do not need to be removed from the windows during the cold season. The average cost of rolling mosquito nets - 4000 rubles. per m 2.
Mosquito nets-pls are similar to roll grids - the only difference is that they do not need a folding mechanism. The design of the grid-pls is similar to the accordion - folds, as a rule, having a width of 10 mm, allow you to overlap the window openings of any height and shape. In order to fold or install a pleated grid into the window opening, you just need to weaken or pull the cord. Their average cost is 5000 rubles. per m 2.
IMPORTANT: Consider that the usual mosquito net is not able to keep the weight of a little child who stuck on the windowsill and leaning on her cloth - will not stand the attachment. Do not allow the child to climb the windowsill independently, firmly lock the windows at his absence, even short!
Mosquito net do it yourself
The easiest way to make mesh protection from insects from fine-tier grid and tape-velcro tape, ensuring reliable protection of premises for several warm seasons. It is necessary to visit the economic store and purchase a mosquito net with a cell of 1.2 mm, glue for sticking a mosaic or cork, a lip-tape consisting of two parts, one of which contains many small hooks, the second is a thin fluffy pile. The cost of the fastener tape-velcro will be about 130 rubles. For 5.5 m, a special mosquito net will cost 120 rubles. For 1.5 m 2, the average cost of glue is 100 rubles.
Open the window of the window and prepare a place to accommodate the fastening ribbon - we clean from dirt and degrease the inner perimeter of the window opening, using a washed rag, then clean water and a piece of clean gauze. To clean the aluminum frame, you can use any solvent, alcohol or gasoline, and the plastic frames need to be washed only with soapy water. Then, separating half a ribbon with small closings from a porous part, we apply it to the place of installation and check whether it does not interfere with the closure of the sash - the main thing is that its edge does not fall between the end part of the sash (looping side) and the frame. We make a thin layer glue on the opposite side of the gear half of the ribbon, we apply it to the installation site. You can proceed on the contrary and apply glue to the perimeter of the window opening in those areas where the fastening tape will be glued - in this case, it will not have to be placed and cutting it in advance, it will be possible to cut down as sticking.
So far, only the glued ribbon with hooks dries, take over the markup and preparation of the mosquito net. Measuring the dimensions obtained when sticking and moved them to the grid, cut it with a margin equal to the width of the fastener tape. We begin the scope at the edges of the mesh and sew the second half of the tape with a fluffy pile of the outside - seams goes along the edge of the tape and mosquito net, if necessary, you can flash in the middle of the velcro tape. Wheeling 2-3 hours after sticking half of the ribbon with hooks-hooks on the window frame, we apply a mosquito net with an arms sewn around the perimeter, a reliable and inexpensive protection of the window opening from insects is ready.
The frame mosquito net is expensive - we will make it with your own hands and with minimal expenses. To do this, you will need: plastic cable-channel 15x10 mm; Four metal corners 10 mm wide; 16 stretch rivets 4x6 mm; Tube glue; Mosquito net sufficient sizes.
We will install the finished frame mesh from mosquitoes outside the window opening, i.e. Just as it is installed by the installers of windows, so when removing the sizes, you focus on the outer side of the window. Having obtained the necessary dimensions, proceed to the creation of a frame for a mosquito net - measure them on the cable channel and cut it under a size from 45 ° an angle with a spike of the metal pink of the metal.
Okrivate the location of the slice of a large skirt or coarse grinding bar, make cut-off frame blanks in the order of their collection, insert metal corners and, holding them with one hand, drill holes in the cable channel, focusing on the holes in the corners. Rivets are placed in the finished holes and are flipped with a riveter, while the riveter must be located outside the cable channel, and not inside it. In the absence of a rivest, you can use short screws with nuts and washers, after twisting, they need to be covered with any oil paint from the nut side so that it does not switched during vibrations.
By readiness of the frame, we proceed with the mosquito net in it. By the way, the grid is the most convenient to use thin, otherwise it will be difficult to hold it in the cable channel. We put the mesh on top of the frame with the condition so that its edges appear for the frame by 200-300 mm, align and snap it with its cable cap, alternately moving away from the long side to the short one, then again long and short. Before clamping the grid on the second long and short sides, you need to slightly stretch it (the helper will need), but should not be too zealous - it is only required to eliminate the provisis. After completing the mosquito mesh mounting on the frame, cutting the grid protruding around the edges, in several places between the cable channel and its cover we apply glue, which completely eliminates the self-opening of the lid.
Now you need to fix the finished frame mesh from mosquitoes on the window. From the sheet of tin or metal, we cut two strips 20x30 mm and two more in size 20x40 mm, bending them in the form of the letter "Z" so that the bending covers the frame from the cable channel. With a shorter side of the fasteners drill a hole for self-pressing. The finished fasteners are fixed on the frame outside the window opening, which will close the mosquito net, from 80-100 mM indentation from the edge of the opening - the long mountings are installed on a self-sufficiency top, short - from below. The distance between the grooves of the upper and lower "z"-shaped mounts should be 10 mm larger than the length of the frame. To install outside the window opening of the frame with a mosquito net, first start in the upper mounts, then to the lower.
How to choose a mosquito net
High-quality frame for mosquito nets created by order by manufacturers of window structures is made of an aluminum profile obtained by extrusion. The aluminum profile is completely covered with powder paint, does not rust, racks to temperature differences and influence of chemicals. The profile walls can be thick from 0.7 to 1 mm - the thicker, the more stronger.
At the corners, the aluminum frame profile is joined by connecting corners of aluminum or plastic - their appearance and wall thickness can be different. From the point of view of convenience of operation, solid connecting corners are convenient, because Their body does not have depressions and recesses, i.e. They will not be made dirt and dead insects.
The usual mosquito mesh canopy is made of Fiberglass - this material is sufficiently durable, racks to any atmospheric phenomena. The optimal cell size in the mosquito grid is from 1 to 1.2 mm - this mesh will be a reliable obstacle for mosquitoes, while it will miss enough fresh air. A smaller cell size is convenient to protect against small insects like midges, but such a grid will be bad to pass the air. The standard color of the window mosquito net is gray. White grid is better not to use, because Its color will quickly change on gray and dirt will be clearly visible. A mosquito net of poor quality has a sharp chemical smell, it is easy to break it.
Handles installed on the mosquito net frame for the convenience of its installation and dismantling are made of soft plastic and are attached to the rubber cord (service life of no more than 2 years), rigid plastic with riveting fastening (service life of more than 5 years), metal stuffing with rivet mounting (service life more than 10 years).
Mosquito net from Fiberglass will provide reliable protection against mosquitoes, but it is not capable of holding pets, somehow dogs, cats, parrots, etc. For complete confidence that homemade favorite will not fall out of the window closed only by a mosquito net, it will take a special, though not quite a mosquito net - "anticress" ("Antikot").
The most successful material from which the Mosquito Mesh Mesh is made by the Antique series, is polyester. Such a grid has only black color, the thickness of its categorous threads in a plastic shell from 0.6 to 0.8 mm, a cell is a little larger than that of a standard mosquito net - 1.1x1.5 mm. Each separate thread, which is part of the grid, "antihushki" is able to withstand the weight of 4 kg. Standard fastening of the frame mosquito net with a "anticress" cannon on the corner from above and below the window opening is inefficient, because An animal in a jump can knock out a frame with a grid outside and falling - the mount is performed on the tapping screw to the mesh frame perimeter to the window frame. The inconvenience of using the grid of the "Antiška" series is to periodically remove and rinse the grid is difficult due to the rigid fastening on the self-tapping screw, in a few years from the installation of the plastic braid from temperature drops to wind up, quite high cost - about 4500 rubles. per m 2.
In addition to the grid-"anticakes" from polyester there are steel and aluminum mesh. The first of them have a cell size from 10 to 50 mm 2, i.e. They can protect the pet from falling, however, they are not able to keep mosquitoes. Large cells of aluminum grids will also not stop mosquitoes, besides, such grids are significantly less durable than made from polyester. Metal grids are not used for overlapping access to mosquitoes and other insects, but in order to protect pets - in addition to such a mesh, the second mesh is installed on the frame, the anti-mosquito, the distance between the two grids should be at least 20 mm so that the pets do not damage the mosquito net to the claws .
How to care for mosquito net in the process of its operation
As the mosquito mesh is polluted, it is necessary to wash, after removing the mesh frame from the window opening - to take two hands for the handles on it, slightly raise the mosquito mesh frame upwards until it stops and remove it from the lower mountings, put onto the sump, take up the bottom edge Make a frame into the room. For washing the grid, simple detergents are used, somehow washing powder and a household soap, cleaning is made with a sponge of a foam rubber or a soft brush - should not be pressed on the canvas, because It can exit fastening grooves.
Installing the mosquito mesh frame after cleaning it is performed in the following order: holding the frame for its lower part (not for the handle), half output it for the window opening, put it onto the tide and on the bottom of the window frame; Grasp the handles on it and give a vertical position; Get the top of the frame in the upper mounts, then lower it in the slopes of the lower mounts.
In the process of reverse installation frame with a grid, make sure that the bottom side of the frame lay down in the fasteners' grooves, and not on the bottom of the window frame.
At the end of the warm season, the frame with a mosquito net must be removed from the windows, wash and put on storage in a vertical position - low temperatures will damage the structure of the threads, we will weaken them.
Abdjuzhanov Rustam, RMNT.ru
The easiest is the independent manufacture of mosquito nets from insects using the appropriate material with small cells and sticky tape for fastening. Such a product will protect the room for several seasons.
You will need necessarily the following components that can be retailed:
- mosquito net with cells 1.2 mm;
- sticky tape - one side should contain a pile, and on the other there must be a lot of small hooks;
- glue for gluing cork or mosaic.
Surface preparation
Mosquito net for plastic windows should be installed on a pure, prepared surface. The space is prepared by clearing open windows from dirt and degreased their inner surface. To do this, you can apply a wedged sponge, rubbed after clean gauze.
Given that the installation is carried out on plastic windows, then for cleaning, be sure to use only soap water, and in no case do not resort to solvents or alcohols.
Laying ribbons
After cleaning the surface, divide the sticky tape. Select a part with hooks and glue to the window opening around the perimeter using glue applied to the opposite direction. Note that the tape does not interfere with the closing of the window. It is very important that it does not create difficulties in the butt zone between the base of the window and the party where it closes.
The tape can be glued easier if you enroll on the contrary, apply glue throughout the perimeter of the desired area, and after, without performing unnecessary measurements, crop the tape at the required length and width.
Marking and installation
Leave the tape for a while so that it dries, and make the marking mosquito net. Measuring the perimeter of the opening, and apply its contour to the canvas. Crashing, leave the stock that will be equal to the width. You need to bend around the perimeter of scavenly, then sew the second part of the tape, and the vice is out. Make a seam with the edge, if necessary, you can make additional stitches in the middle. After the ribbon with hooks on the frame is pasted, wait around three hours. Then attach a grid with a ribbon to it. Now you know that this design is not so difficult to do this design.
Installation of mosquito net on the frame
Of course, the following option is not the cheapest. However, costs can be minimized if the installation on plastic windows is carried out independently.
Materials. You need to purchase: Metal corners whose width is about 1 cm, cable-channel from plastic size 15x10 mm, glue, about sixteen stretching rivets, the canvas itself.
Making frame
Since this product is installed outside the window, then performing your measurements, oriented precisely on this side of the window. After the necessary data is obtained, you can proceed to the manufacture of the future frame: Mix your received data on the cable and cut the required length of forty five degrees with a sawdust or knife.
Places where the cut was made, sanding with a special sharpening bar. Match the ready-made polished components of the future frame, connect with metal corners. Holding them down, make holes for a rivet in the finished cable channel, taking into account the holes in metal corners.
Insert the rivets into the resulting holes. It is important that the rugging device is located outside your cable, and not inside. If you do not have a rivet, you can use screws and nuts.
Spliving screws, be sure to cover the nut with oil paint to avoid screwing nut during vibration.
Fastening
After running the frame, go to the attachment to her of your anti-mosquito cloth. It is better to use a thin mesh to avoid difficulties when it is pressed in the cable. Put it on top of the frame in such a way that the edges performed for the perimeter of the frame by 2-3 cm, and snap the mesh with the cable-channel lid, alternating a short and long side snap. Be careful before fixing the long side.
Do not forget to pull it a little to the corner to eliminate the savings - but it's not worth pulling it, so you can break the protective canvas. After you finish installing it on the frame, you can crop all unnecessary sticking surplus. In some locations between the cable and cover, apply glue to avoid spontaneous opening of the lid.
How to install ready-to-window
Metal sheet, cut two bands 20-x30 and 20x40 mm, bending them in the form of Z. Try to bend clasp a channel. Select a shorter side on which drill a hole intended for self-proof. The finished mountings are installed from the street side of the window, retreating around a centimeter from the window opening.
Mounts are installed using self-press, and long mounts are placed at the top, and short - downstairs. The distance between the lower and the upper fasteners should exceed the frame length by 1 cm. Start start from the upper mounts, and end the bottom.
Nowadays everything is technically improved, and the anti-mosquito net is not an exception. Modern mosquito nets are almost invisible, easy, durable, well misses light and block the path of street dust. The design of them is quite repeated at home; mosquito net can be made without experience and special tool in 2-3 hours. This means at least 2-3 multiple cash savings (multiply by the number of windows), but you need to know what type of the mesh is better suitable for and how to do it, to immediately get into place and served a little longer. What we will try to help readers.
Types of window grids
Manufacturers offer a wide selection of swollen mosquito nets (pos. 1 in Fig. Below), sliding, pos. 2, pleated (folding harmonic), pos. 3, and rolled mesh role, pos. 4. The last two types are not necessarily removed for the winter and they practically do not take place space of the room. But all of them have 3 features.
First, technical complexity: need loops, constipation, mechanisms, and for mounting - acc. Production skills and special tools. Secondly - high cost. Swing Mesh turnkey cheaper 1600 rubles / sq. m in the Russian Federation could not be found. Shift pulls more about 1900 rubles. per square. m, and the grid-plize and rolled 4500 rubles. sq. m - it is fabulously cheap.
But most importantly - all the "mechanical" grids do not protect against mosquitoes in due measure. As you know, the males of mosquitoes are not sucking, but it is necessary for the ripening of eggs. Walking in the warm-blooded place, beautiful ladies of the mosquito kind are hidden nearby and are waiting patiently when it is possible to imagine the moment for the invasion. Komarichm to penetrate inside you need only 2-4 s; Moving grids are opened for more time. Let only one individual fly, but also its annoying establishment will not give enough sleep as it should. That and so not easy to summer heat and stoolness.
Note: A simple and inexpensive way to avoid the penetration of mosquitoes through the opening, window or door-tight mesh, see at the end.
A reliable and inexpensive anti-mesh mesh on the window with their own hands is performed by a fixed frame (pos. 5) or frameless, pos. 6. Frame mosquito net can be outer, internal or plug-in in the opening window. Frameless grids are possible only internal. The cost of 1 square. m factory frame mesh, without installation, is 700-1000 rubles / sq. m; Still as many will have to pay for the installation on any floor above the first. A set of factory parts for self-making frame mesh costs 300-500 rubles. without panels. In the same amount, a fully finished frameless mesh per window will cost. An option for 80-100 rubles is possible. / Window, but under a big question, see below.
What to do?
In general, the manufacture of homemade mosquito net is carried out with the following:
- Window frame material - plastic, tree.
- If the window is plastic, then the type of shutters opened - swing, tilted, combined.
- Type of home ownership - private house, multi-storey.
- Layout of a building.
- Window opening frequency.
For these conditions are chosen:
- the material of the grid panels - depending on the local conditions and the presence in the house or nearby cats and small rodents;
- mesh design - frame, frameless;
- if the framework is the location of it in the opening: internal, outdoor, insert;
- also for frame mesh - frame design and materials for it;
- molding method - and frame, and a frameless mosquito net can be attached to the window in several ways;
- build frame with a cloth (if the mesh frame) or tailoring of a frame of a frameless mesh;
- installation / installation of the grid in place.
Note: The mosquito net on plastic windows with tilted flaps is performed exclusively by the frame outdoor, unless the opening of the sash for the summer is not removed at all.
Cloth
The maximum permissible size of the mesh of the mesh mesh is 3.7x3.7 mm; Through a large komarihi already smear. The minimum is limited to the conditions of air and light transmission. Mesh with cells less than 2x2 mm is suitable as temporary or in a good ventilation, for example. on the balcony; See also Next. The mosquito grid in the middle lane is usually taken with 3x3 mm cells; In the taiga places, where the small gnus is picked up, with 2x2 cells and even 1.5x1.5 mm. Mesh with 1x1 mm cells are used in places very dusty.
Fiberglass mosquito nets (Fiberglass) with PVC coating (pos. 1 in Fig.) It's still in the course due to its strength, but otherwise they are bad: light and air supporting unimportant, because Thick threads. PVC under the action of ultraviolet and dust will soon be destroyed, the grid becomes a dust collector and herself begins to dust with the smallest glass needles. Almost in the southern regions of the Russian Federation, Fiberglass panels need to be changed daily.
Modern anti-mosquito nets weave from polyester (polyester) fibers. A grid with rectangular cells (pos. 2) is cheaper, more stronger and better reflects (does not accumulate) Street dust, but the light and air misses it no matter. In places where small bloodsuckers (midges, wipes) are common, and the sun and summer is not a bright radiance, it is better to make a mesh on a window from a material with 6-coal cells, pos. 3. The cloth with 6-coal cells of 1.5 mm in the diameter gives the same resistance to the streams of light and air, like wicker with rectangular 2,7x2.7 mm.
The size of the cell and the type of weaving sellers, especially on the Internet, is not always known. Most often offer a mesh with rectangular brands of brands standard, anti-tilt and antitox, pos. four:
- Standard - 3x3 mm, material of ordinary strength.
- Antiple - 2x1 or 1.5x1.5 mm cell, material of increased wear resistance and strength. Weaving the web smooth: dust sets little on the grid, but is preferably reflected back by small air twist. Designed for southern flames with high insolation and dust content in the air. It can replace the "anti-juro" grid with 6-coal fine pieces in the taiga and tundra, but light-wide light is satisfactory for high latitudes.
- Antique - 2,5х3,5 mm cell or so, the material of increased strength. Light and air supporting satisfactory for medium latitudes and south. From Gnus does not save; It is impossible to reduce the compute Otherwise, the cat is squeezing claws.
About Antikoshkh
Plastic mosquito net - anticress withstands the outcomes of the medium size and riotiness of cats and small rodents; Those, by the way, the vertical climbs are not worse than their pursuers. Plastic anticress is desirable to put on the first floors, but if you have a homemade cat, then on top of the mosquito net you need to put from the inside steel with a rare cells, see fig.; The same is done outside, if there are many stray cats in the district.
First, homemade cats are largely larger and stronger than streets, and their claws are sharper, because less wear out. Secondly, it is rather a rule than an exception: a completely fattened domestic cat, having received a mosquito net, throws his brake and begins to tear protection from mosquitoes with so much in vain. Often with this and tearing claws.
What colour?
The clarity and contrast of the picture outside the window when viewed through the white grid, even with a very rare large cells are noticeably falling, but it seems well outside the outside. The point is here in T. Naz. diffraction distortions of the light flux. Therefore, the mosquito net is better to take black, dark gray or dark brown. At the glance, the molar pattern will be noticeable on it, but the visibility will generally improve in general, and the outside will deteriorate even more.
In frame or without?
Frameless mosquito nets of the right design or weakly hold on site, or do not allow frequent removal, so their application is limited (for more details, see Next). There is another option "superbudget", up to 100 rubles. On the window, a frameless mesh: the regular seals of the plastic window are removed, the panels are started in their grooves and is fixed with a liner cord; See eg. video:
Video: Example of making frameless mosquito net
But, if the PVC windows with a rubber seal, inexpensive, then, firstly, it turns out that the seal accumulated in 2-3 years, without breaking it, is impossible. Secondly, if the windows are new and the seal is still removed, then later, the same 2-3 seasons it stops sealing, it starts blowing into the window, flow. Window repairing then costs much more expensive materials for the frame mesh, up to the need to replace the window frame. Therefore, then we will do mostly by frame mosquito nets, and we will return to beamless when it comes to where they are appropriate.
Fastening
When choosing a method for fastening and installing a frame mesh, consider: if the mesh is outdoor, and the window is on the warranty, then the last "burns", unless the grid is not ordered a turnkey to the window to manufacturer. The reason - fasteners will have to be powered by frame. Fix the frame mesh to the plastic window is possible by 3 ways (see Fig. Right); To the wooden - they are with some features, see below.
Mounting plungers (spring-loaded stems with heads, on the left in Fig.), The easiest way: the heads are discharged, the grid put in place, the heads are released, and the rods are jammed in the opening. On the stocks, the grid can be put both from the inside and outside, however, the fastening of mosquito nets with plungers is common to the trail. reasons:
- The grid is weak down - a strong wind squeezes it inside or, outdoor, in general it takes.
- The heels of plungers comes large concentrated loads; The mesh trepal wind, and the stamps of the rods eaten in the frame from any material of the well, which is why the warranty on the window disappears.
- Holes under the rods weaken the frame, and from the same alternate wind loads, it breaks faster than one-piece.
- Plumers for mosquito nets are not suiced, and their installation requires special tool.
Frames of outdoor mosquito nets are attached to the window most often z-profiles, in the center. Then the most grids are obtained as compact and in winter storage occupy a minimum of space. But, first, the fastening of the mosquito net Z-profiles on the upper floors with their own hands is simply dangerous for life: for marking and installing fasteners you have to stick out in the window half. Secondly, the drilling of the window frame is required, which is why the warranty is lost on the window or, if it is wooden, the foci of rotes occur.
Fastening the mosquito nets with brackets, on the right in fig., It looks like the fastening of Z-profiles, but the brackets are put on the mesh frame, which can also be inner or outer. Thickness of the package of grids with brackets on winter storage swells twice and more; The grids on the storage should be shifted with cardboard so that they do not break the panels with the brackets, but the windows frame is not damaged. The frame mosquito mosquito with brackets is the most preferred option for making with your own hands, especially if the wooden and / or mesh frame window is made from undergraduate materials, see below.
Measures
Preparation for the manufacture or acquisition of a frame mosquito net begins with measurements. If the window is wooden, then measure the width and height of the light opening in several places; For the current take the smallest meaning. Suddenly you order a grid into a wooden window for an independent installation, you need to know exactly from the manufacturer, which is where and how to measure, because Wooden windows designs are diverse.
For a mosquito net on Z-profiles in a plastic window, you also need to measure its light opening of 3-4 places in height and width (left in Fig.) To make sure whether it did not lead? Then you need to measure the same width and height of the opening between the internal edges of the seals (in the center); If the opening led more than 2 mm - in a narrow place. Finally, the wizards will be grateful to you, and the grid immediately stands exactly to the place, if you measure the width of the oxcons about and the height of their clay ns, right in Fig.
Measures under the bracket
On the left to the trail. Fig. The names of the parts of the fastener bracket are given for mosquito net; This will come in handy us and below. And on the right shows how to measure the window frame measurements to calculate the profile size and adjust the dimensions of the mesh frame; The width of the brackets take from 12 mm. The light opening of the window at the same time is slightly reduced, but to use P-shaped staples to make the mesh frame flush with the window on inside, it is not necessary: \u200b\u200bthe fastener heads will turn the window frame. Paws of the upper brackets make longer lower (see below); The height of the shelves of the bracket should be equal to the height of the slope of the slope with the seal.
How to make ready
Suppose you decided to save only on the mounted mesh. An independent installation of a mosquito net on a plastic window is possible in several ways. The most reliable is outside in the corner, pos. 1A on the trail. Fig: no wind grid will be squeezed. But in this way, mosquito nets are possible only in private houses or if the new window supplier offers grids as a gift. The fact is that the markup of holes for fastening corners with their own hands in this case is possible only at the place, because Do not rush needed in 2 directions immediately.
If the windows are not yet in the walls, then the grids are put on their frames, they place the drilling under fasteners, they put corners, and only then the windows are mounted into the wall opening. It is impossible to do this on the already refined windows of the upper floors without experience at the height and climbing equipment, and from the first floors, the grid can simply steal.
Note: Factory mosquito nets for outdoor installations are often supplied with internal rotary latches. But, the first, the language of the latch over time spoils the frame (do not forget, the mesh wind Treplet). Secondly - the language of a simple latch is elementary allotted outside with a thin nail or wire, loosen through the grid, and the latches with locks are expensive.
The mounting Z-profiles is described above and is shown at the post. 1b Fig. Outside on the upper floors of it, although with a risk for life, or with a reliable insurance of a monterretic belt with a palm, you can do. But a strong side wind can move the grid, immediately turn it out and break it. Reliable still fastening with brackets, pos. 2. Frame mosquito net on the brackets The outer and plug-in differ not only by the size of the mesh frame, but also the height of the fastening brackets. In the designations of typical profiles, it is given in mm, 2 last digits; For typical plastic windows - acc. 13 and 7 mm. Therefore, before ordering a grid, you need to measure the height of the sloping of the window of the window - suddenly it is not typical. Then you need to inform the masters to pick up the desired profile, otherwise the grid will not hang out, or at all will not get up.
Note: The top fastener of the frame mosquito net is 1.5 cm deeper than bottom, pos. 3 in fig. Why - Clear from Pos. 4, where the process of installing the grid in the mount is shown.
Homemade Rama
As real
The composition of the set of parts for self-assembly mosquito net is shown on the left in fig. Under the unwitched window take the nearest greater sizes and racks with crossbars are cut into size. To install on Z-profiles, the size of the frame frame inside should be equal to the size of the light opening; On the installation of the grid on the brackets, see above. The width of profiles is usually from 60 mm, so that for mounting it is enough for the brackets. An additional transverse beam is an impost - and fastening for it, is ordered optionally, if the grid height is more than 1.3-1.5 m. In the swap and sliding meshes, the imposts are pushed after 60-80 cm in height.
Some meaning is the material of profiles and fasteners. Steel corners (in the center in Fig.) A little cheaper, but with time rust - PVC coverage is grieving. In addition, the metal rubs the plastic racks and the crosslinor, why the frame is smaller. Plastic corner mosquito mesh frame connectors (left in Fig.) Good in all respects. As for the actual frame profiles, they are made from PVC (cheaper) or propylene (more expensive). PVC is less durable and from ultraviolet after 3-4 seasons becomes fragile. Propylene frames of mosquito nets serve for 10 years and more, it is necessary only in a timely manner as you need to change the cloth.
The frame on steel corners is fastened through bolts. Rama on plastic corners is bonded or self-draws, or regular latches; You can also back it with hardware to serve longer. On the laying of the mesh panel in the frame, see below.
From something
Plastic profiles for frames of mosquito nets are sold and lengths of 3 and 6 m. If the grids need to be put on several windows, their purchase and compound into the frame by submitted means is optimal in terms of reliability and minimum cost option. In this case, you need to purchase and special elastic cord for laying the grid in the grooves, pos. 7 in fig. The surface of the grid cord ribbed; When swinging it in the groove rib ribs, the grid threads are longitudinal in this direction, providing a more uniform tension.
Completely "from which" frame of the mosquito net is obtained from boxes - plastic cable channels 10-60 mm wide. For the outdoor mesh frame in Z-profiles, it is necessary to take a box of approximately square section (marked with red arrows on pos. 1), so the frame will be stronger and tougher. For the landing frames, the box is better fit, in the cross section are oblong (blue arrows).
Collect the frame on ordinary flat steel corners, pos. 2 and 3. Frame from cable channels is bolted, removing the lid of the boxes. For a frame from special services you need to take corners with a thickness of 1.5 mm and fasten with screws on the metal - no covers, the nut with a spring washer to the bolt can not be at all. The impost, if needed, made from the segment of the cable channel by gluing its cover with durable glue (mounting point, titanium) and scoring the ends with wooden plugs. In the frame fasten the impost through the wood-cuts on the tree.
Laying the web
The finished frame is placed horizontally a groove or an open chit box up. The mesh mesh canopy from 3 cm (better than 10-15 cm) are applied, straighten. If the battery is large, the canvas will smoothly fall when the wings of the battery, whether to make, pressed on the contour with small weights. Further, if the frame from the special hospital, the cord is placed on the slot over the groove and roll it with a roller to a complete pressing. Surplus the grid is cut by a knife, leaving ok. 1 cm above the groove.
If the frame is made of cable channels, then first put on the superimposed and painted grid of the covers of the narrow sides. You need to press them up to snaps at once along the entire length, better in 4 hands. Then the long caps are applied and pressed. If you act neatly and consistently, the grid will be stretched as exactly as branded.
Pens
The outer mosquito net will not put in place without a handle. The cheapest option is soft and thin plastic, on the left of the pos. 4. Such is put on places before overlaying the grid and pressed into the grooves of profiles along with it with a cord. Cheap, simple, but thin handles are often torn, and when the panel is replaced, it is necessary to change the cord - it is flattened over the handle, and it will not keep this plot of a new grid. In addition, soft handles cannot be put on the frame from cable channels. Therefore, on the frame of the mosquito net, it is better to put the pens pouch, attached by self-drawing, on the right to pos. four.
Note: Do not put one furniture handle for a penny savings to the impost - the frame will soon break.
Skoby
Plastic brackets-holders of the outer mosquito net (pos. 6a and 6b) do not spoil the frame of the window, but rather fragile and with strong wind are often broken; The grid is hanging in them. Steel spring brackets (pos. 5) is more reliable and tightly pressed the mesh to the window, but can scratch the frame of the window, even if plastic is covered: thin soft PVC quickly rubs. The best way to make a spring bracket for fastening the mosquito net is completely reliable and safe - to pull the cutting tube cutting on it (here) and warm the household hairdryer at the maximum or gently turning over the gas flame. The bracket is tightly covered with a layer of durable elastic plastic OK thick. 1 mm. To install a mosquito net on brackets in the wooden window, this is the best option.
Without Rama
Frameless mosquito nets are attached to the place or ribbon venkro-dipente velcro - or soft magnetic stripes, the same as the door of the refrigerators are inserted into seals. Each these fastening systems have their advantages with disadvantages and their own scope.
Velcroe
Velcro keep the grid cloth is very tight, but also to fly it is not so simple. Half of the Velkro ribbon in hooks glue to the window frame from the inside. If the window is plastic, then hooked half the velcro is glued along the internal contamination of the slope. A half of the velcro is sewn along the contour of the grid panel. For winter storage, the cloth is folded into the roll; If the hooked half of the velcro was sewn to him, then the roll would grably and in the spring, unfold it without damaging, it would be impossible.
In the use of mosquito nets on velcro, still unpleasant circumstances are revealed: it is painfully sitting in place. Try to fly off the tongue of shoes on the velcro, where it is only 1-4 square meters. See and if the clutch area is 100 times more? It is necessary to glue the "repeal" side to the frame of the window, it is necessary to remove the remnants of which without damaging the window frame, it is impossible. And it does not guarantee the fact that on the 2nd - 3rd damage the grid pasted half of the velcro will not dare along with it. Therefore, the mosquito net on velcro put most often on the balcony windows in which the mesh stands the whole season. Cover the sash of the window thin mesh does not interfere.
Note: Not so long ago, the velcro is modification appeared on sale - the plug-in buttons. To install a frameless mosquito net to the balcony window, this is perhaps the best option, see the next. video:
Video: Installing a frameless mosquito net on top buttons
Magnets
Ribbon magnetic holders are produced by single-pole, for fastening to steel, and bipolar, for mounting to a non-magnetic basis. On a single-pole magnetic tape make mosquito nets, for example, in car windows; On a picnic or in the country, they are better to leave them open so that the car does not turn into the oven. The magnetic tape is culbble (long-sleeve sleeve) from a thin, durable and non-rotting fabric: a thin cinema, kapron calander, and sewed along the contour of the panel, which remains only to impose on the place. The mesh holds on the magnets is rather immense, but in a small opening it is quite reliable, and completely does not damage the basis.
Two bipolar magnetic holders stick fighter, and therefore suitable for windows and doors. At the finished kits (which are more expensive), the polarity of the ribbon is marked, and one of them has already been pasted on Velcro-Scotch. It is added to a degreasing basis, and the conjugate magnitis is sewn in a hiker along the edge of the cloth, see above. Two-polar magnetic velcro can be made from a pair of unipolar and bilateral tapes. The polarity of the tapes must be marked so that they stick together when installing the panels, and not bounced apart from each other. If the error with the polarity came out, then, in general, nothing terrible: we turn the cloth, and it keeps, only weaker. Mosquito net on magnetic holders is perhaps the best option for leaving the cottage or temporary accommodation, let's say on the recreation center.
And at the door
Magnetic ribbon holders allow you to make a mosquito net to a balcony door impermeable to mosquitoes, but easily passable for people. To do this, a couple of cloths (see Fig. Right) at the top and on the sides are attached to the frame of the door with a plug-in velcro, and at the bottom and seams are bonded by a two-polar magnetic tape. There is one trick here: on the seam, the magnitty should be fixed with segments of 10-15 cm in 20-25 cm, pos. 2 in fig. The edges of the seam should be converged with the allen on the width of the magnetic tape. Then the person through such a veil just passes, even if something carries both hands, but she is tightly wandering behind him, which the smallest Komarich will have time to fly.