Potting ceiling wallpaper is one of the most difficult stages of repair in any room. This will require special preparation, effort and material. After all, the usual wallpapers for the ceiling will not fit.
They simply dug. But the process of applying ceiling wallpapers itself has many features that need to disassemble more detail. All nuances read in our current article.
It is better to refrain from this operation if you live in an old house. After all, in Soviet times, the ceilings were laid out of the plates, respectively, every one and a half meters the surface will have a junction that cannot be blocked.
In addition, the plates are often lying at different angles and have an unequal height. This can be seen only after removing the previous coating. If such a situation is familiar to you, much safer and thoughtful will install stretch ceilings that these disadvantages will effectively hide.
You should also not use the wallpaper on the ceiling in the kitchen and bathroom. After all, in these rooms, hot steam climbs up, and due to the moisture, the material begins to spare.
Thus, wallpaper on the ceiling in these rooms will not last long. Most likely, they will dial in a few weeks of use. Maximum - in a month.
What wallpaper fit for the ceiling?
Do not take wide rolls, because it is not easy to work with them. No need to try to look for ceiling wallpapers from foreign manufacturers. Basically, they produce only domestic.
It is not recommended to acquire wallpaper too bright colors. They look inappropriate in any design. It is considered the best option to be white or any approximate pastel colors, depending on the design idea of \u200b\u200ba particular room or an apartment as a whole.
It is also impossible to choose too thick wallpapers. After all, they are very heavy for the ceiling. Only specialized materials intended for this surface are needed.
In small rooms from sticking wallpapers with large drawings worth refrain. After all, this visually reduces the space. If you correctly choose the ceiling wallpaper, it is, on the contrary, will create a feeling of comfort and will expand the room.
What difficulties occur when sticking on the ceiling?
Do not forget that wallpaper on the ceiling will always be lit, and you will not be able to disguise the disadvantages to the object of furniture or, for example, the picture. Here each nuance will be noticeable immediately.
It must be remembered that the ceiling is the warmest place in the room. Consequently, the glue there will dry out at times faster. This gives an extremely limited time to the correction of any errors in the process of working with the material.
It should not be forgotten that you will not be able to avoid seams on the wallpaper. Consequently, it is necessary to come up with a way to disguise the joints of the seams or make them as less visible as possible.
Types of wallpaper
There are several types that differ in their destination and appearance. Among them:
- Paper wallpaper. This is the cheapest category. However, the price here fully justifies quality. Paper wallpapers will not last long, so soon you will have to repeat.
- Fliseline. They are considered ceiling wallpaper and fit perfectly under painting. Thus, they can act as an independent material. Moisture resistant, and this is a big plus.
- Vinyl wallpapers. May not lose their original color for a long time, allow wet cleaning, as well as unpretentious in operation. This species can imitate a variety of surface structures.
- Fiberglass. Not subjected to mold, as well as resistant to abrasion and do not combustible.
- Liquid wallpaper. This is an alternative to plaster. They are evenly applied to the entire ceiling surface with a spatula.
Is it possible to glue the ceiling wallpaper on the wallpaper previous?
This question refers to the category "You can, but not need." Ceiling wallpaper can be applied. However, this is mostly excessive spending time.
The fact is that new wallpapers should be attached to something, and most often the glue uses for these purposes.
However, it absorbs into the previous layer, leaving traces on it. Also in order for glue frozen, oxygen is needed. Because of this, there are bubbles on the coating, or the surface is moving at all in some places.
This is explained by the fact that the number of layers causes too much load due to massiveness. Consequently, wallpapers are too heavy for the ceiling and begin to move away.
You can aggravate the situation if you try to paint the resulting composition. Wallpaper color is mixed with a column of paint. Both layers are impregnated with moisture, and most likely, the whole design will fall down.
However, it is only at best. At worst, it will have to ripple them in layers long and hard. And this occupation is not pleasant and requires tremendous patience.
Additional stages of training
First of all, you need to make sure that there are no multiple layers on the ceiling. If they are, it is advisable to get rid of them. After all, it is not known how they can lead themselves under glue or under the overalls in general.
You should also not forget that to cover the ceiling it will be necessary to turn off the electricity. Accordingly, it is best to start shook wallpapers in the morning to have time to complete all the work before the onset of darkness.
How to glue the ceiling wallpaper?
By producing this operation, you need to remember that it requires specialized glue, preferably high quality. It does not need to save. It is from this composition that the success of the work done will depend.
Step 1. Preparation of the surface of the ceiling
The first step is the most important, because all the further fate of the wallpaper is depends on it:
- First you need to make sure that the ceiling is absolutely clean, does not contain extra paint or bliss. Some paint covers can be left, but they must be previously checked. It is enough just to join the sticky ribbon, and then with the power of it to tear. If the tape remains clean, this coating can be left and not worried about the wallpaper.
- We must not forget that all cracks and potholes should be carefully sharpened. Otherwise, they will be noticeable on your wallpaper. Before putty, you need to clean the ceiling well. Then close all the flaws and only after that they sharpen everything from above.
- If any paint or other coating remained on the surface of the ceiling, it must be thoroughly wash with soap, wait for complete drying and only after that you can begin to stick wallpaper. The reason is that due to glue, any of the surface of the surface will manifest on the wallpaper.
Slicing
How to cope with the problem of visible seams? Before glue the ceiling wallpaper, you need to cut the material.
It all depends on the number of windows in the room and their placement. How to glue wallpaper on the ceiling? Ceiling wallpaper must always be applied towards the window.
If in one room is more than one window, it is recommended to cut the material along the length of the walls. This will help to avoid a large number of seams and junctions. In the process of cutting wallpaper for the ceiling, items should not strictly correspond to measurements.
Make them a little longer. There will be enough stock in three centimeters on each side so that the wallpaper is slightly visited by the wall. If this size is too much, you can cut it at any time.
If you chose the wallpaper with a pattern, you must first measure the length of the first strip, and all subsequent cut down strictly in the same place. Thus, you can achieve a successful matching of the drawing or texture. Excellent practice during sticking is not only the application of glue on the wallpaper, but the treatment of the ceiling.
How to cover wallpaper glue?
For this it will be necessary to turn the piece of material so that the front side is lower. The band must necessarily be located on a flat and clean surface.
Stages of sticking first stripes:
- Kneading glue. The composition should be made as thick as possible, depending on the length of the wallpaper. While he swells, go to the next step.
- It should be noted the middle of the ceiling from two different parts of the room. To do this, you can use a chalk cord, it will need to be delayed and click on the ceiling. Thus, it turns out a flat line, which can be used in the future.
- The light from the window should go along the junctions, if you doubted how to glue the ceiling wallpaper correctly. In this case, defects will be less noticeable. As mentioned earlier, the wallpaper need to be glued along the length of the room in the direction of windows.
- In the process of blending wallpapers, turn off the electricity just the switch is not enough. It must be turned off on the shield or unscrew the plugs. Only so you can be sure that the wiring will not be closed and you will be safe.
- To learn how to bleach the ceiling wallpaper, or rather, how to smear the first strip, it is enough to use the instructions from the manufacturer. Do not forget that the instructions differ depending on the type of material and the manufacturer. General tips can only lead to useless web spending.
Subsequent stages of blending wallpaper
For effective work, it is best to work on sticking at least 2 people. In this case, one can stand on a stepladder under the ceiling, and the second to feed the wallpaper canvases, holds them as high as possible to the ceiling for convenience. This will significantly speed up and facilitates the workflow.
We must not forget about the reserve on each side of the wallpaper canvas. There will be enough three centimeters, but you can take up to five. If the cloth is too long, it must be trimmed.
To avoid negligence and glue the ceiling wallpaper as in the photo, you need to use a spatula for neat removal of excess. For these purposes, scissors are not suitable or even a sharp knife. After all, they can leave torn edges.
To organize a continuous blowing process, it would be nice to acquire also a third partner who could prepare the next piece of the canvas. The process must be made as fast as possible, because then the wallpaper will dry evenly and will not arise extra difficulties.
If there are small air bubbles when connecting a piece of ceiling wallpaper, it is necessary to immediately align them with a spatula.
Later it is not possible to fix such a mistake. This procedure must be repeated with each piece of wallpaper. All the following (after the first) band must be glued to join.
As for how to properly glue the ceiling wallpaper so that the seams are not visible, it is necessary to slowly attract one strip to the other. It is done in such a way that in the end the data of the bands in contact with each other.
It should be remembered that all excess glue needs to be removed immediately.
For these purposes, white rags will fit better. Preferably stock large amounts. It is important that the vehicle is dry and clean.
Then it does not printed on new ceiling wallpaper and help gently remove the remnants of the glue applied earlier. The stripes that glue the last or are applied along the edges of the room, it is necessary to cut off even below. Thus, it will be possible to save and strength and time spent on the installation.
General conclusions
The methods of how to glue the ceiling wallpaper, there is an infinite set.
However, the above tips are the most efficient and common. They will help even a newcomer to cope with this difficult task. True, to simplify the work still will require the help of one or two acquaintances.
Beautifully separated ceiling is able to create an unique atmosphere in the room. Good results can be achieved using wallpapers.
They will help add comfort in the room, distinguish between space on the zones and even hide some defects. Working with wallpaper is easy, and everything can be done on your own. The main thing before glue the wallpaper on the ceiling, prepare everything you need and deal with some nuances.
Without a well-prepared foundation, it is impossible to produce high-quality shots of wallpaper.
Diverse world of wallpaper
The modern building market offers a large selection of various wallpapers: vinyl, paper, phlizelin, photo wallpaper, material under painting and other species. Choosing the material, you should be guided not only by your preferences, but also the interior of the room. Wallpaper should harmoniously fit into the overall picture of the finishes.
For the ceiling it is better to choose special wallpapers.
They differ in that they have two dense layers with applied over embossed, but at the same time less weight than coating for walls. Due to the embossed surface with their help you can hide small irregularities and defects on the basis. In its composition, wallpaper on the ceiling can be divided into paper, flieslinic, glass and liquid, which are in the root differ in the technology of applying to the surface.
Types of wallpapers for the ceiling.
Recently, wallpapers have become popular. For them, special water dispersion paint is used. The surface can be painted in one color or apply the selected pattern.
Back to the category
Before sticking wallpaper, you need to find out which amount you need. For this, the surface area is measured. Holding the number of bands, do not forget about the reserve.
The band must be 2-3 cm longer on each side and when sticking to enter the walls. After completion of the work, you can delete all too much. Remembering that rolls are 10.5 m long, it is easy to find out how much it is necessary.
The ceiling primer provides better adhesion of the base with glue.
The end result depends on how qualitatively preparation was carried out. So that in the future the room pleased with its appearance before glue the wallpaper on the ceiling, it is necessary to carefully prepare the surface.
From the ceiling you need to remove all old coatings.
If it is planned to stick the wallpaper on the plastered ceiling, the plaster must be removed, and the surface is primed. All cracks and chips should be shaded. Special attention should be paid to the shakes of ceiling plates.
The primer is best to use acrylic deep penetration. Apply it in several layers.
Each new layer is applied only after the previous one dries. Then the surface is processed by sandpaper. This is done so that the surface is smooth and smooth.
From the room, if possible, you need to remove furniture and household appliances so that nothing bothered to work. The windows indoors are better to close, avoiding drafts.
If the apartment is on the sunny side, you will have to curtain the windows. The sun rays that will fall on the wallpaper will not let them dry uniformly. It is still very important that the air in the room is too dry.
Otherwise, the wallpaper will start to unwind. Moisten it is quite simple. It is enough to put several tanks with water in the room.
Before sticking the wallpaper on the ceiling, you need to cook tools. For work will be needed:
The control line is necessary only for sticking the first wallpaper strip.
- knife;
- roulette;
- ruler and pencil;
- brush;
- glue and container for its dilution;
- paper painting tape under the seam;
- rags.
And one more very important thing, without which it will simply be impossible to do anything - it is a flooring.
In a small room, an ordinary table can perform in this role. But for larger rooms, 2 stepladers and wide thick boards will be needed. The boards fit between the stepladers, and on them you can move freely and glue the wallpaper.
As for glue, it is better to use a special composition. It consists of strong binding elements that are rapidly collapsing, and the drying process takes less time.
Back to the category
Ceiling Wallpapers Wallpaper: Step-by-step instructions
Before sticking the wallpaper on the ceiling, you need to ensure your safety. To do this, remove the chandelier and turn off the power to the shield.
The next step is the markup of the ceiling.
Thanks to this reception, the salary will be easier, and the stripes will be skipped smoothly. To do this, you will need a cord with two shipboards at the ends and chalk. Marking can be applied both in the center of the ceiling and on the site of the first strip.
The direction of the bands depends on whether the window is in the room.
If there is, the strips are glued perpendicular to it, in the absence of a window - along the length of the ceiling. You should start from the corner opposite to the input. So, the seams between the closers will be less noticeable.
The required number of bands should be cut in advance so that in the process of work is not distracted.
Also in advance you need to prepare the adhesive composition. The prepared strip is then stacked on a flat surface "face" down, and with the help of a brush it is applied with glue. Special attention is paid to the edges.
The ceiling global technology is no different from similar work on the walls.
More qualitative result can be achieved if working together with the assistant.
When working with paper wallpaper, the glue is applied first on the cloth. Working with phlizelinov does not require applying glue on the product. The adhesive composition, which is made by 10-15%, which is specified in the instructions, covered only the ceiling.
Elimination of defects when sticking wallpaper.
The canvas folds with the harmonica in such a way that the front side remains all the time inside and did not dirty. A paper painter strip under the seam is pasted on the ceiling markup.
Wallpapers are applied to the ceiling, focusing on the markup. A plastic spatula or an ordinary cloth is aligned, and aircases accelerate. Several times you should walk along the cloth in one and the other side, especially on the edge, so as not to leave a single flaw.
After that, you can start gluing the next strip. It is applied to the edge of the first and also thoroughly align.
After all aircases are removed, it is necessary to "pull" the seam between the strips. The edges should fit tightly to each other, but not overlapping one to another. For greater reliability and seal seal, it should be risted with a rubber roller.
In the process of work, all the time control the result. Each strip must be carefully examined, and if disadvantages are noticed, they need to be removed before the glue is completely dry.
The use of ceiling wallpaper has quite a few features - and at the stage of choice, and when they are sticker. We will touch on the main stages of this work, we mention the possible problems and solutions, and at the end we will see the video - sticking wallpaper on the ceiling will be demonstrated vividly.
Preparation of the ceiling
How to prepare the ceiling to stick wallpaper?
- Armed with a steel spatula, completely remove all the protrusions and irregularities. Ceiling was bitten by lime or chalk? The whots are also considered to the plaster.
Tip: work will go faster, and dust will be much less, if you pre-wet the ceiling with water with a sprayer or roller.
- If the room is raw and / or in it, fungus appeared - we proceed the surface of the ceiling by antiseptic primer. She will not only kill the mold, but also prevents her appearance in the future.
Budget version - the use of any chlorine-containing detergent fluid. It will not provide, of course, long-term protection; However, the fungus will die. By the way, the area affected by him is better to clean the overlap before processing before concrete.
- The next stage is the use of penetrating primer. It will make the surface of the ceiling much stronger, which is important when sticker heavy wallpaper. In addition, the soil will significantly improve the adhesion (grip) of the ceiling with the adhesive layer, and at the same time will reduce the flow of glue (see).
If you do not want the Wallpaper to fall - do not be lazy to cubs the ceiling.
- Preparation of the ceiling to shook wallpaper necessarily turns on the putty of all noticeable irregularities. The level of leveling depends on the type of wallpaper: the choice of embossed flieslinic disguise small irregularities, and the selection of glossy vinyl, on the contrary, they are emphasized.
In the latter case, the surface must be perfectly smooth. If you are a novice in the finishing spacing of the ceiling, it is better to use the maximum wide spatula (see).
- If the surfaces of the irregularity remained on the surface, stripes, protrusions, it is better not to be lazy and put them. Tool - grater with grinding net or grinding.
- Finally, the prospait areas are re-primed by primer (penetrating primer). After its drying, everything is ready to sticker wallpaper. For a clearer picture, we suggest watching a video - sticking wallpapers for the ceiling.
Sticker wallpaper
What will required?
And in fact, do you need any special conditions or tools? Something else?
- Invite a partner. One work is extremely inconvenient to perform this work, and the result will most likely disappoint.
- Prepare a roller on a long handle. Apply glue with brush bottom up much harder and slower. Type of roller coat unimportant; However, the longer the pile - the more the glue it will be plotting at a time.
- A soft rag will help smooth the wallpaper and drive air bubbles.
- The simplest forests or high and long table covered with polyethylene will repeatedly simplify your work. Move the ladder or stool of the tens of times when the sticker of each band is somewhat tedious.
- Finally, spread the wallpaper glue. Consistency - where is the thick of the usual. Cutting the ceiling with liquid glue with liquid glue, if the wallpaper is thin, and it is impossible with thick and heavy wallpaper: they will simply fall.
Basic operations
Wallpaper bands are glued in the direction of the window, so that natural lighting does not make noticeable joints between the stripes. Starting standing from the selection of the ceiling with a wall.
- Roulette is measured by the length of the strip.
- A strip of wallpaper is cut.
- By its width is flawed with glue ceiling. Not wallpaper, it is the ceiling: so glue much easier.
- One edge edge passes; At the same time, the partner holds the second edge of the latitude, controlling the correct location relative to the previous bands or walls.
- Then from the glued edge wallpaper is smoothed by a cloth. If the band as a result turned out to be a little longer - nothing terrible, surplus is trimmed with a sharp knife.
- The last strip is exhibited not only in length, but also in width. Do not be lazy to measure the necessary strip width in both corners of the room: the walls will not necessarily be parallel.
Useful little things
Putting the ceiling wallpaper requires accounting for a number of nuances.
- As already mentioned, thick wallpapers with a relief pattern are cleaned with small surface defects. But the blending of vinyl wallpapers on the ceiling requires not only putty of irregularities, but also pre-grinding.
- Wallpaper glue strictly jack. No adolescent. If the bands will go to each other - with lateral lighting, the ceiling will look just awful.
- Neither with the sticker of wallpaper, neither during drying glue drafts are not allowed.
Tip: At this time, it is better to provide a permanent temperature and humidity in the room. Close all windows and doors. During the drying, the humidity in the room will be very high, so drying can delay the two, or even three days. However, it is better to suffer extra day than to overlap the fallen wallpaper.
- The lumens between the wallpaper and the wall will hide the ceiling plinth. It is also glued only after the complete drying of the wallpaper (see).
- Light colors make the ceiling visually above. However, they again make a more visible surface defects. The same effect gives gloss.
- Wallpaper Painting is better to paint with a water-by-co-engineer on acrylic, acrylo-latex or silicone basis. These types of paints do not smell and give the surface resistant to moisture and abrasion, which can be washed with an ordinary sponge with soapy water.
Conclusion
Pay your attention to another nuance. If you have to level the surface of the ceiling - perhaps it makes sense to stop on the usual painting? The result is in most cases at least no worse than with the wallpaper sticker, the time and money will go noticeably less. If additional questions arose, check the video on this page.
Successes in repair!
Repair of an apartment
? - a reasonable question, since the ceiling pasting with wallpaper has a number of significant differences from. It is much more complicated to stick the wallpaper on the ceiling than on wall structures, and some skills and skill here will not interfere. This pasting is produced before the walls of the walls and you will most likely need an assistant. Stowing the wallpaper on the ceiling is more laborious, much more sensitive to the quality of the horizontal surface, and all defects as a result are more noticeable.
If the result is important to you, then it is better to apply a proven material. For ceiling pasting, embossed or special ceiling products are needed. Their main difference from simple wallpaper is concluded in manufacturing technology: they are produced from two dense layers, and relief embossed are applied on top. Relief drawing and product density helps to hide small irregularities and other ceiling defects.
Special ceiling wallpapers are produced only in our country. They have a large variety of textures (about 200 species), but have a poor color gamut, or rather only white.
If you pay attention to foreign products, it is necessary to keep in mind that in European countries do not produce special ceiling wallpapers. There for pasting ceiling apply material under painting, and you can also follow their example.
Ceiling wallpapers are divided into various types: paper, vinyl and phliselin.
What is the wallpaper for the ceiling to choose?
Domestic products are practically no different from imported: the structure is also made of two layers, approximately the same density and porosity, the only significant difference between the foreign material is the possibility of its painting with the help of water-dispersive paint. And you can do it a lot of times!
Paper domestic wallpapers, the service life is 3-5 years. Then they lose their appearance, under the influence of dust, light, moisture and cigarette smoke. It will not be possible to correct the situation, it is possible only to complete the coating. But, five years of operation actually not a short time.
Fliseline and imported products are more expensive, but also to hold out 10-15 years, it will only be necessary to twist them from time to time.
How to glue wallpaper on the ceiling with your own hands
First, before pasting material, a ceiling is needed.
The quality of work in many respects depends on the state of the horizontal surface on which we will apply the material. As a result, a competently prepared ceiling is the key to our success.
The ceiling surface should be dry and clean, it should not be irregularities and remains of the old coating.
If the surface was painted with enamel paint, then it is better not to remove it, and rinse well with soap, dry and clean the sandpaper.
You can check the strength of the old paint using the tape as follows - a small strip of the tape is glued to the surface of the ceiling and cut down sharply if the strip is clean, then the ceiling is suitable for further work. If the paint fragments remain on the scotch, the coating must be removed.
Lime coating can be washed away with the help of a brush and hot water, we pass by our tool throughout the surface of the ceiling, wait 30 minutes and wash the lime of the wet rag. Thick layer of such a coating can be removed using a scraper, in this case it is not necessary to water the ceiling.
If there are significant defects or a strong slope on the ceiling, then it is necessary. With a very strong difference in ceiling plates in height.
For better adhesion, the ceiling should be using acrylic primer (it will quickly dry and not toxic).
If your ceiling is made of drywall, then the joints need to be punctured with a special perforated paper and pretty. After grappling, covered places are grinding with grater or sandpaper.
Before work, be sure to de-other wiring in the room!
We perform markup on the ceiling
Wallpaper bands are required to stick to the ceiling perpendicular to the window to the window, that is, along the light flux, this is done so that the joints are noticeable.
On the ceiling from the longitudinal wall from the window, we mark the pencil distance similar to the width of the roll, minus 3-4 cm (stock). Exactly the same distance measured on the ceiling from the opposite side. We connect these marks to a direct feature, it is easier to do this with a stretched cord. The fundamental line is made. 
Preparation of adhesive solution
for half an hour before the start of work, a glue solution is prepared from a dry mixture, in the necessary proportions written in the instructions. To avoid the formation of clots, a funnel in which the funnel is spinled into the water tank with a small stick, continue to interfere with the formation of a homogeneous mass. Ready glue should stand about half an hour to swell.
If the glue turned out to be too viscous, it can always be diluted with water.
Pattern of wallpaper
During the cutting of the wallpaper, it is necessary to take into account the backstage for each wall, which will be 2-3 cm. It should also be remembered that the wallpaper cloth after drying the glue can "sit down". Do not forget about the docking pattern, if the wallpaper has a pattern.
If we glue paper products, then the outdoors should be decomposed on a flat surface (usually this floor) side with a pattern down and brush or roller evenly smear the glue from the center to the edges. Then you need to fold the cloth in the middle of the inside the inside or, wrapped both edges to the center, and leave for impregnation for a while.
It is important that the wallpaper is impregnated with an equal amount of time.
The instructions typically write that the impregnation of the product is 10 - 15 minutes. But professionals are not recommended to withstand more than 10 minutes, otherwise the wallpaper can simply break.
Ceiling pasting with fliselinova wallpaper It has the main difference in the method of applying glue - it is flawed directly on the ceiling, and not on the product. Also, in the preparation of adhesive composition, the consistency is made somewhat thick, which is written in the instructions for wallpaper of this type, approximately 10-15%. This is even more relevant when pasting the ceiling by vinyl products.
We start sticking the wallpaper on the ceiling. One master must be on the larger, and the assistant from the bottom, to serve him the prepared canvas.
the edge of the canvase is combined with a paved line and tightly pressed against the ceiling surface. Make a small back on the wall. Pressing the middle of a piece across the width and put the rubber roller of the wallpaper strip from the center towards the edge. The longitudinal edge additionally hurt the corner.
Excess parts of the wallpaper are removed by a sharp stationery knife.
Then the remaining cloves of online approach are pasted.
It is imperative to spin the surface with a rubber roller from the center to the edges and watch the joints are well glued. Excess glue is driven out and removed with a clean cloth. During the work of the work, you need to exclude any drafts and temperature differences in the room, in addition during drying (about a day), the same rules apply. Room temperature is the most optimal for drying wallpaper.
Watch all the cloth to be pasted tightly and without folds.
If wrinkles were formed during the sticking, it means that the wallpaper was badly soaked with adhesive composition, or the air got there. Carefully delete this part of the wallpaper and apply glue again and press it on it. Small folds themselves will dissolve after complete drying.
How to glue wallpaper on the ceiling with your own hands
Sticking Wallpaper in Corners
To find out the exact size and position of the material, it is necessary to gently press the material in the corner and apply a pencil mark. Separating this piece from the ceiling design, it is necessary to carefully cut an extra fragment on the label made.
Do not break, this procedure must be finished before glue dries. Relief Wallpapers Bend very carefully so as not to damage the coating.
Glue wallpaper near chandelier
Before starting work on wallpaper pasting, it is better to remove the chandelier from the ceiling.
In the material strip, which will be held at the location of the lamp, a neat slot is done under the wires with the calculation so that the protective decorative entry of the chandeliers after the installation completely hid the cutout.
Remember that mounting the lamps in your place and serve electricity can only after complete drying of the blended wallpaper!
We hope that this article fully answered the question - how to glue the wallpaper on the ceiling with your own hands? If you still have any questions, ask them in the comments to this article. Good luck to you!
Interestingly, many people are wondering how to glue wallpaper on the ceiling yourself? It seems to me enough in order to write an article about this. The fact is that a person did not possess a fitful character, such a job together with a partner still takes out of equilibrium - Rugan begins, scandals, as a result of which the work is not moving on a yot. In this article on the site's website, we will try to reveal all the secrets of masters who know how to crack the ceiling of any size alone. We will examine this technology in detail, sobering it to the smallest details.
What wallpaper can be punished on the ceiling alone and what is necessary for this
To begin with, it is necessary to deal with those properties that the wallpaper must have wallpaper for their maximum and comfortable shoes.
- Firstly, the wallpaper should easily slide on the surface of the ceiling - without it, it will not work well with each other to docile well with each other.
- Secondly, it should be convenient to hold the wallpaper under the ceiling yourself. Agree, unwrapped and smeared with gloss band wallpapers is quite difficult to keep. And what in this case is about working with her? It is much more convenient to hold wallpaper twisted into the roll - and such as you understand, we will not smear glue.
- Thirdly, in this situation, the wallpaper is simply obliged to almost instantly stick to the surface of the ceiling - this step should be paid to the minimum of time. We need such wallpapers that would stick and subsequently disappeared even in a non-collected state.
How to glue wallpaper on the ceiling do it yourself photo
For these three requirements, it is possible that it is possible that the flieslinic wallpaper can be hit - they greatly slide almost along any surface, they do not need to be smeared with glue (only wall is covered with glue) and they immediately stick with the ceiling immediately and do not disappear. This is exactly what is needed in this situation.
With the question of which wallpaper glued on the ceiling, we figured out, it remained to clarify the situation with additional requirements, in which the independent sticking of wallpapers on the ceiling will be easily and easy.
An important role in this issue is played by a properly prepared workplace, which allows you to freely move under the ceiling throughout the entire clovel. For this you have to host racks - the challenge is that you can simply go and do not look at your feet and even more so not to jump from one table to another. I think everything is clear here, and everyone will solve this question in its own way - one will put two or even three tables nearby, others will collect construction scaffolding. In general, as they say, dare and do not forget that the height of these racks must match your growth - or rather, they should be so raised from the floor so that you can work comfortably.
What wallpaper glued on the ceiling
Ceiling pasting with your own hands: technology
Despite the seeming complexity, pasting the ceiling by fliesline wallpaper actually looks quite simple and at the same time has a fairly large number of subtleties and nuances. And the first of them is the glue itself. We'll have to forget about all recipes for its preparation, which are written in a pack and cook it differently.
The glue for fliesline wallpaper should be sufficiently thick - if proceeding from the proportions, then the full packaging will have to dissolve in the twelve-flow bucket.
We are talking about the standard packaging of Kelid's glue - it is that it is suitable in such a situation. Although Methilana is also pretty good - I can't say anything about other glues, as I work with these. In general, at the end of cooking glue should look like a thick sour cream. Here is such a glue and apply to the ceiling with a roller and do not forget to grind the surface, otherwise the glue is quickly absorbed and in the process of work will have to be distracted and smeared the ceiling again.
Ceiling pastry wallpaper with your own hands photo
With the first wallpapers, there should be no problem - you don't need to dock with anything with anything, and if you are experiencing about the junction of wallpapers with baguetas, then just make a small backstage and after full gluing the wallpaper cannon cut it under the ruler. It is very important not to curb the first strip - if it goes to the side somewhere, then the online wallpaper will not be able to glue. So that it does not occur, it is necessary to specify the direction of sticking using a lace.
The gluing technology itself is quite simple - we take a roll and, without unwinding it, apply one of its end to the smeared ceiling, and then, slowly spinning it with one hand, the second smooth the spatula. When you get to the end, the roll can be cut off first with a slight margin, and then clearly under the ruler or metal spatula.
How to cut a roll of wallpaper photo
Almost the same way as the process of sticking all the subsequent wallpaper cloths. The difference lies only in working with the joint of the canvases - they are not only necessary to connect qualitatively among themselves, but also to rotain so that they never separated and did not dug.
In the process of sticking, the canvases are not necessary to fully docile - if somewhere there is a gap within 1 mm, it can always be eliminated after the stickers of the entire canvase. Fliseline wallpaper allow you to carry out such an operation - they greatly slide over the surface and they are enough just to pull to each other with a plastic spatula. To do this, you just need to drive out the remnants of the glue towards the seam - do not cease, the result can be deplorable. If you get even a small backstage, then to eliminate the wallpaper, wallpaper will have to tear.
How to fir the wallpaper joints on the ceiling photo
In order for the edges of the wallpaper did not dug over time, the joke must be pretty much a special plastic roller - he reminds something with a tread in miniature. It is this protector and helps to highlight the place of compound of individual cavities.
Punning wallpaper on the ceiling together photo
I do not know how much this technology cladding the ceiling by wallpaper will seem difficult to you, they solve themselves here. I can only say one thing if you wondered on the ceiling, then nothing is better than this method you will not find. To glue other wallpapers, and even with a partner, much stuck and longer. The fact is that for plating wallpapers, complete coherence and mutual understanding is needed.
Not every homemade sample knows how to glue fliseline wallpaper on the ceiling. This process has several features. We will talk about them in detail.
Under Fliselin, there is a special nonwoven material produced by complex technology from textiles and cellulose. A mandatory component of such wallpapers is a special connection with a very thin structure. It acts as a binding element for textiles and cellulose, characterized by the properties that have normal fiberglass.
Wallpaper from nonwoven
Flizelin wallpapers have the following operational advantages:
- High strength. Fliselinic products are practically unrealized when sticking. It distinguishes them from paper wallpaper.
- The possibility of pasting almost all known ceiling surfaces, ranging from wooden and plasterboard and ending with concrete.
- Stability of geometric shapes and sizes. After drying on the ceiling, the wallpaper is not compressed. And if you are inadvertently wet the products from fliesline before sticking, they do not lengthen any millimeter.
- Excellent aesthetic indicators. Externally, fliseline wallpaper on the ceiling look flawlessly. You can purchase material with an ordinary (flat) image, as well as with a popular volumetric pattern.
- When the ceiling is groideing, it is necessary to apply glue solely on its surface. It is not necessary to process wallpaper. They are applied to the ceiling in dry form, which greatly simplifies and speeds up the process of finishing the room.
Flizelin wallpaper well level surfaces with small defects - dents, cracks. They are allowed to glue on uneven ceilings. In addition, after a while you have the opportunity to easily remove the top layer of such wallpapers, leaving their leveling base on the ceiling that you can repaint several times.We add that the fliesline finish is truly easy to care. It is allowed to clean with a wet rag and vacuuming. At the same time, wallpapers will not lose their unique operational and wonderful aesthetic properties.
As mentioned, flieslinic products are suitable for most ceiling surfaces. Here you only need to competently prepare the ceiling to pasting. If earlier it was bitten, it is necessary using a rag and brush, as well as a soap solution to wash off the old finishing layer. In cases where the packers were superimposed with a thick layer, it is advisable to first consider it, using a spatula. And only after that wash off the old layer completely. Playing and concrete overlaps are always aligned. You have to close all the available depressions and gaps, sharpen the surface treated in this way, dry it. After that, it is desirable to bring the ceiling to the perfect state through fine skin .
Fliseline products for ceiling surfaces
Important moment! Concrete or a previously plastered surface must be braced well. Then the phlizelin products will be kept on the ceiling without exaggeration forever. Painted by dispersion or oil compositions of the surface is allowed not to prepare to the procedure. Just erase the dust from them and boldly begin to glue the wallpaper. But only provided that the paint does not disappear, but it is tight enough. Practical advice. Take a small segment of the tape, stick it to the ceiling surface. And then cut off sharply. If the paint is not observed on the scotch particles, boldly the coolness fliesline wallpaper on the ceiling.
With plasterboard overlaps, it will have to tinker a little. You need to carefully close all the plots of fastening of sheets of plasterboard and junctions between them and putty. It will correctly be put to the connection of individual products reinforcing ribbon. And to put the surface putting on it. Then wait until the leveling layer is dry, processes it with a skin and apply a primer. Note! There is no need for a putty of the entire plasterboard surface. Flizelin is a dense material with two layers. He himself, as we noted, cope with the ceiling leveling.
For ceiling pasting, Flizelin-based products need to use special glue. When buying wallpapers, sellers will definitely advise you which composition is better to purchase. These types of adhesive mixtures are popular:
- Kleo Extra Line;
- Methilane ultra;
- Spec Flizelin Quelyd;
- Premium.
All of these compositions are sold in the form of powders. They need to add water to the proportions recommended by the manufacturer and thoroughly stir. Note that glue is always done on the ceiling, rather than in cases where walls are floating. Now you start the main operation. To begin with, perform the markup of the ceiling for the first fliseline canvase. This strip must be pasted as correctly and smooth. It is she who will later be asked to ask the direction to all other pieces of wallpaper.
Sticking Flizelin Ceiling Cloth
Marking is done simply - at the junctions of the ceiling with walls, die 50 cm (standard width of phlizelin wallpaper). Put the appropriate marks and stretch the twine between them (rope, marking cord). Cut on it a marking line. Professionals advise placing the ceiling perpendicular to the window. In this case, the lines will go parallel to the flow of light, which will provide high-quality disguise to the resulting joints. Next, follow these instructions:
- Condressing the ceiling length wallpaper strips (take an additional pair of centimeters for tolerances - from two sides to wall surfaces). Cut, using a square, a roll of drawing.
- When gluing products with any images, be sure to check the sliced \u200b\u200bstrips. Then you definitely do not make mistakes with the correct location of the pattern items.
- Fill paper or plastic film on the floor.
- A roller with a long handle or lubricate the adhesive part of the ceiling surface to which the wallpaper strip will be glued.
- Print wallpaper. You need to combine the edges of the strip with a previously applied markup and tightly press the items to the ceiling. It is more convenient to perform this operation together. One person serves a canvas second, which is under the ceiling (on building goats or on a different elevation). Do not forget to start one of the edges of the canvas on the wall.
- Running the rubber roller or plastic spatula Bottled strip from the center to the edges. Thus, you not only align the wallpaper, but also remove all small air bubbles from under them.
- The edge coming on the wall surface is pressed (very tight) with a metal line (a spatula is allowed), after which it is allowed to cut extra parts with a knife.
- Soft rags immediately wipe the braceled strip, getting rid of glue traces.
Subsequent actions are simple. We stick to the first second fliesline band, then the third to the second and so on. Do not worry about the fact that the joints between the wallpaper may disperse after drying the glue. There is no such thing on the basis of phlizelin. Plots of the ceiling surface near the lighting devices are flooded as follows: Make an incision of a cruciform shape in the lane, skip through the cut-out electrical wires, press the fliesline to the edges of the hole under the lamp or chandelier, mount the box (decorative). It will hide the cross-shaped incision.
The glued phlizelin wallpapers must dry with the absence of drafts. Just do not open some time the doors and windows indoors.
The processing of wallpaper paint is allowed to perform only after their complete drying. Staining is performed by water-resistant paints, water-dispersed, latex. Chief them choose your taste. But do not forget that the color of the ceiling must be harmonized with the general interior solution of the room. In addition, pay attention to the following designers advice before:
- In rooms with low ceilings, as well as with a modest area, choose the colors of champagne paint, a blue or peach shade. Such tones will be visually raised and expanded the room.
- Fans of the traditional approach will suit all shades of white paint.
- Young people are recommended to paint the ceiling in bright colors.
Painting Flizelin Wallpaper on the ceiling
The process of color of fliesline ceilings is performed by a short-sized roller. Typically, the surface is treated with two layers of coloring composition. The first should be applied perpendicular to the wall with the window opening, and the second one - in parallel to it. The use of this technology guarantees the absence of low-profractive strips on the ceiling.
Molding elements available on the ceiling, color not roller, but a brush. It is also used for processing any decorative parts on the ceiling surface. And in cases where the walls were finished, their upper plot must be saved by a painting ribbon. After painting the wallpaper, you remove it and get clean walls, not stained with paint.