Many at home remained old dining or kitchen tables, usually they are polished or wooden and have an absolutely not trendy look. Want to throw it away? Not worth it! Why is spent on a new table, especially old tables are much better than modern and can serve many more years.
In this article, we will show 4 universal ways how to update the old dining table with your own hands, not hard to spend the family budget!
The main methods of the restaurant include the following works:
- Painting table. (Usually apply special paint for wooden surfaces, it can be both an acrylic basis and enameling)
- Replacement table top (The table top can be ordered ready for size, or do it yourself, as shown in master classes below)
They can be used onely or combine depending on the damage and state of your furniture.
We update the kitchen table countertop
Look at your dining table. If his general condition is more or less satisfied with his appearance, but the tabletop completely worn out or the table top simply can not be removed without damaging the entire design, this master class is exactly for you.
Materials:
- White enamel paint for wood;
- Degloss;
- Polyurethane varnish on a water-based water-based (you can use glossy at your discretion);
- Boards;
- Liquid Nails;
- Putty for wood;
- Thin sandpaper;
- Brush, fabric, water.
Restriction instructions
Step 1: We remove old paint
- Treat the feet of the table by the mounted.
- Thanks to this medium, you do not need to be sander and handy the former paint, but simply apply it over, wait for drying and paint in the right color.
- Apply 3 enamel paint layers and wait for it to complete drying.
Step 2.
- Turn the table upside down the table. If you shot the legs for painting, then it will be more convenient for you to paint table tops and side wooden mounts.
- Apply the Number and paint as well as on the legs.
After drying, turn the table back and paint the worktop at the edges, capturing centimeters of 10, it is not necessary to cry.
Step 3: Lay out a new countertop from the boards
- After complete drying, measure the sizes of the table top, its length and width. Boards must be a little more in size, centimeters on 5 exceeding the futuree - countertop.
- Take liquid nails and evenly distribute them in the middle of the table. Then repel from the number of available boards.
- If their even number, for example, 6, then they should put in exactly in the middle. In the case of an odd quantity, you must put in the middle of the unpaired board. Again, see how it will be better, based on the size of the specifically of your desk and boards.
By gluing the middle, the remaining boards on the sides. Leave the table to dry by 12 hours or a day, depending on the glue.
Step 4: Spike
- Be sure to fill the gaps between the placts with a putty for wood, otherwise they will be stuck pieces of food.
- Smooth it with a finger, and surplus wipe with damp cloth.
Tip: Let the putty will dry during a couple of hours, and after passing all the boards with thin sandpaper.
Step 5: Polishing
- Wipe the boards well, without leaving the dust and garbage on them. Take polyurethane varnish, stir it up and long strokes begin to apply on the boards. Try to make the first layer thin.
- Leave to dry the countertop for a day, then carefully pass the surface with sandpaper, erase dust and apply the second layer of varnish.
Step 6: Tells
As soon as the lacquer is dry after the last paint, start cooking paint. In this case, the effect of blissing is planned, to achieve it mix 1 part of the paint with 4 parts of water.
Browse the area of \u200b\u200bthe board, and then clean the cloth immediately. Krable so the entire worktop, then add some more water in the paint and walk again.
After complete drying, the table is ready for use.
How to update polished table
If you have a small polishing table in the corner of the corner, which it's time to send to a landfill, but the hand is not rising, then you should take magic tools in the hands and become a cross fae.
Materials and tools:
- Sander;
- Sandpaper;
- Morilka;
- Gel to remove paint;
- Plastic scraper;
- Brush;
- Polyurethane varnish on a water basis;
- Dark enamel paint;
- Pens for a box.
Order of work
Step 1: Remove the old varnish
- Take yourself into the closed clothes and shoes. If the legs are removed, then for convenience when grinding separated them from the tabletop.
- Spank all parts of the table well, getting rid of all dents and scratches.
- Small details, as well as places where you can damage the table, grind sandpaper.
Step 2: Apply the Morkin
Apply your favorite brain on the prepared parts of the table, following the instructions. Depending on the selected veil, lift the time laid for drying.
Step 3: Process the shelf of the table
- To clean the shelf of the table, use a gel to remove paint.
- After applying it, wait minutes 4 (depends on the gel) and neatly, plastic scraper, read the shelf, trying not to scrape the wood.
- After apply the veil.
Step 4: Lacrem Surface
- Well wipe all parts of the table, without leaving them dust and garbage. Take polyurethane varnish, stir it up and start to apply long strokes.
- Try the first layer to make a subtle. Leave everything to dry for a day, then carefully pass the surface with sandpaper, erase dust and apply the second layer of varnish.
- You can, after drying, apply the third layer, but not more.
Step 5: Color Coloring
- Color the table in your chosen color, wait until we dry, and collect it.
- Screw the handles into the drawer of the table.
Agree that the result of the work done is impressive!
How to paint a wooden table in white
In one of the evenings, you realized, looking around, what are you among the monophonic dark things? Want to refresh the room and do not know where to start? White wooden furniture always looks very effectively and expands the space.
Make a white table can be absolutely from any color. In this workshop, we will show how to paint the black table in white.
Prepare the following:
- Means for removing paintwork products;
- Means for degreasing;
- Plastic scraper;
- Thin sandpaper;
- Brush;
- Polyurethane varnish;
- Emaley paint.
Order of work:
Step 1: We remove old paint
- It is necessary to remove the old layer of varnish from the tables. To do this, we use the means to remove paintwork products. To protect yourself from harmful chemicals, put on protective gloves, mask and glasses.
- Apply tools to the place of deletion of paint. Depending on the instruction, you will leave the specified time and start gently removing the paint layer, trying not to scrape the tree.
- After removing the whole paint, degrease the surface with a special solution.
Step 2: Spin and lacquer
- Go through sandpaper over the entire surface of the tables. After trying them well from dust.
- Take Polyurethane lacquer, Stir it and begin to apply long strokes. Try to make the first layer thin.
- Leave everything to dry for a day, then carefully pass the surface with sandpaper, erase dust and apply the second layer of varnish.
Step 3: Painting Table
Wait for the full drying of the varnish and start applying paint. Paint in 3 layers and leave to dry one day. After you can place the tables and please the eye of the update.
Wooden loft dining table
Now very fashionable countertops made of wood on the legs of a contrasting color. Such tables came to us from Loft style - it is distinguished by its simplicity and a little rudeness. But such wooden tables do to any interior.
We look at the master class as an old table to make a stylish loft.
Instruments:
- Saw;
- Boards;
- Polyurethane varnish;
- Brush;
- Enamel paint;
- Liquid Nails;
Montaja technology
Step 1: Cut the board
Measure the sizes of the table top, its length and width. Boards must be a little more in size, centimeters on 5 exceeding the future base - countertop
- Prepared boards cover polyurethane varnish. To do this, stir it up and start to apply long strokes. Try to make the first layer thin.
- Leave the boards to dry for a day, then carefully pass the surface with sandpaper, erase dust and apply the second layer of varnish.
- After drying the varnish, turn the boards of enamel paint in 2 layers and leave to dry for 12 hours.
Step 2: Mounting table top
- Prepare an old worktop, pouring a little sand and rubbed with a cloth.
- As soon as the paint dries, apply liquid nails to the old table top and start gluing colored boards to it.
- So that the boards glued well, put the cargo on the table top and leave for a day.
As a result, it turned out a great little dining table in Loft style!
You can refresh the interior, even slightly updating the old thing. It is not worth spending huge money to buy a new dining or coffee table when possible to do everything with your own hands. After adding a little imagination, you, with the help of stencils, you can make a table just amazing.
And if you are with the table with the table , You will plunge your guests in envy - after all, you will have an original, unique collection of furniture, which can be called even designer if you try and decorate it. Create to amaze!
Do you have a favorite, comfortable and comfortable kitchen table, but his appearance has not been happy for a long time? Do not despair, but give him a second life. Restoration of the kitchen table is an excellent solution to refresh the interior of your kitchen, not parting with your favorite piece of furniture. We bring to your attention some tips on how to update the kitchen table and save a considerable amount of money.
Of course, if your table is hopelessly broken and cannot be repaired all the accompanying efforts may be unjustified. But most often the correctly chosen method of restoration helps to return the favorite furniture for life by changing it beyond recognition.
This is one of the most proven and lectureout technologies that make it possible to return to some elements of furniture a beautiful appearance and presentability. To update the old kitchen table you will need the following materials and tools:
- grinding machine with different nozzles;
- mask, glasses and gloves;
- putty;
- putty knife;
- primer for wooden surfaces;
- brush for primer, varnish and paint;
- alkid enamel paint required color;
- varnish or wax.
And now we turn to the main stages of work.
Inspection of the table and identifying essential defects
At this stage, inspect the integrity of the legs of the table and fasteners, check whether the worktop has defects or damage. If it is discovered that the table is broken, try twisting the connecting bolts. If such an action does not give significant changes, you will have to fully disassemble the table, sanding irregularities and gaps, grooves and places of connections, for greater reliability, apply glue and fix the glued parts by self-draws.
If the feet of the table completely failed and the repair is impossible, you can perform a complete replacement to more modern, for example, metal or carved, wooden - it all depends on the interior design of your kitchen and the selected style. Broken fasteners are also replaced. Keep in mind that the reconstruction of the table is not only a change in the appearance, but also ensuring the reliability of the structure. Do not forget about it.
Removing the old coating
Next you will have to remove the old coating - varnish or paint. Put the mask, protective glasses and with the help of a grinding machine, proceed to stripping. You can use sandy paper of large and medium grain, but then you need to tune in for a long and time-consuming work - to remove paint or varnish in this way it is not easy and not fast. It is better to perform these work outdoors or in a well-ventilated room. If you still decided to grind the table in the kitchen, completely open the windows and check the floor and all the furniture surrounding the furniture or paper.
Treatment of cracks and chips
After grinding, it is necessary to clean the old kitchen table from dust and inspect the table top for the presence of defects. All chips and cracks need to sharpen, and after the putty dries, redesk the entire surface. The fact is that even the most minor defects will be well noticeable after painting. After a long effort, the resulting purified surface of the kitchen table will become ideal for creation and creating a new design.
Stamp surface primer
Passing the table top and other elements of the table, it is necessary to degrease everything, and after drying, apply a soil mixture. This stage cannot be skipping, otherwise the paintwork will be uneven and short-lived. The ground mixture is applied in two layers, each layer must be good before applying the following. After drying the second layer, it will take about 24 hours to leave, you need to redt the surgeted surfaces again.
Painting kitchen table
This is perhaps the most pleasant stage of work in the restoration of the kitchen table with their own hands, without dirt and dust. Each wake of the brush makes you a step closer to the desired result. The paint must be applied in two layers, and dark color - in three. The latter, the finish layer it is necessary to give 3-4 days for complete drying.
Application of protective coating
The final stage of work is the uniform application of a protective varnish in 2-3 thin layers. After drying each layer (about 4 hours) and before applying the following, it should be slightly sewn the surface with sandpaper with fine graininess. It is possible to use wax instead of varnish as a protective coating - it will make the tabletop matte or it can be grated before the appearance of shine. The first layer of wax rubs into wood with a soft cotton fabric, and after drying, a second layer of light circular motions is applied. So you can repeat several times for one day. On this kitchen table repairs. Leave a product for one week and only after this time it will be ready for full exploitation.
Restoration of table tops with decorative tiles
Then we will look at how to restore the kitchen table with your own hands using ceramic tiles or mosaic. The decorative tile is one of the most popular materials used for facing the surfaces of kitchen heads. The choice of many people is obvious - in addition to the presence of a variety of textures and color solutions, the tile is distinguished by its reliability and durability. In addition, it is very convenient for maintenance, it is easy to clean and resistant to high temperatures.
In order to restore the kitchen table with a ceramic tile you need to choose a suitable tile or mosaic to the style of your kitchen, purchase a special tile glue, grouting for seams and edge profile.
Preparation of surfaces is carried out by the same principle as for painting. After the end of the preparatory work, glue is applied to the surface of the table top with a toothed spatula, which will allow firmly and securely secure the tile.
Tile elements must be layered in a pre-thought-out composition. The distance between the tile is adjustable with special plastic crosses. When the entire tile is posted and tightly pressed to the surface of the table, and the glue is completely dry, it is necessary to prepare a grout mixture and fill it with the seams between the tiles.
In order for the view of the renovated table to be finished, the side sides of the table should also be decorated. For this purpose, special edge profiles are used, which are selected in the tone or style of the selected tile. Thus, by completing this easily accessible for each home wizard, your furniture will revive and give the design of the kitchen of originality and freshness.
Decoupage Kitchen Table Countertops
Consider another popular way to update furniture - decoupage. This modern decor technique allows you to quickly and, most importantly, fiscaling the table, making it a bright accent of your kitchen.
For the restoration of the table with the help of decoupage, in addition to the materials and tools needed to clean the table from the old surfaces, its grinding and primer, you will need napkins for decoupage, water container, glue, polyethylene film, matte or semi-wave varnish.
Stopping repair with decoupage begins after it is predicted and ground or after coating with paint or varnish. At first, with the help of a pencil, you need to mark up, noting the location of the image. Next to water tank must be placed the front surface down the cut paper image. After 30 seconds, the image is removed and placed on a polyethylene film, on the same principle - the front surface down, and all the extra paper surfaces are removed.
The prepared picture is lubricated with glue and is attached to the prepared countertop. In this case, using the file you need to thoroughly smooth out the picture and only then remove it. If desired, the surface of the pictures can be reeded with paints, and in completion, the resulting image should be covered with acrylic varnish and give it a good dry dry. On this, the repair of the kitchen surface is over. Three days later, your new exclusive table will be ready for full use.
So, what is such a procedure as the restoration of the old table, what are the methods and materials to restore its appearance? In general, how to return this to the subject of the interior of his youth?
General principles
When the restoration of the table is restored, the subject not only returns its appearance. It is necessary to restore and its functions. Therefore, before proceeding directly to the update process, it is necessary to carefully check the integrity of the subject: in what state of its legs, whether they are broken, whether accessories are not broken. And think about whether it is worth doing this at all. Indeed, it is unlikely to have a renewed pendant table, sparkling new paint, will bring satisfaction to the owner. So first appreciate the front of the work, think about their expediency, and then, if you came to a positive solution, eliminate the first thing all breakdowns. And then then proceed to update the appearance.
We restore the desk
As a rule, you are not so much with this interior item. Usually he, in view of his bulkness, always stands in one place, throughout the apartment to hang curtains or remove the web, no one pulls him. And he suffers from time most of him the tabletop. How to reanimate it? Yes, very simple. Restoration of a written table - a simple procedure that does not require any material or physical costs.
Work description
First find suitable wallpapers that most match the existing interior. Then paint the entire table under their color. After it dries, take the worktop with wallpaper using PVA glue, and then cover it with glass. The latter can be ordered in the store. Instead of wallpaper, you can take any poster or make the photo of the table top, or to buy a beautiful tight fabric of the desired colors and also go to her surface. In general, you need to fantasize. Restoration of the table is a creative thing, so we create, invent your options.
What can be done with an old coffee table?
If this subject of the interior, albeit inexpensive, but such a favorite and convenient, already, to put it mildly, has become not particularly attractive, arm yourself with paints and brush to update it. Restoration of the table by painting it - the work is simple. However, the way we want to offer will take time. First paint the table of white paint. It will be the basis. Then, when it dries, color the tabletop with strips of different colors and unequal width. So that they lay exactly, color the surface gradually, and to determine the boundaries each use tape.
Decoupage
The restoration of the table in perfectly suitable for those subjects that are not very often in contact with water. That is, with its help, you can update the written and journal described above, as well as for this first, the selected item must be put into order, paint and give time to dry. And then on the surface to glue images from a napkin or special paper for decoupage using PVA glue. When pictures are dried, the entire surface you need to cover with acrylic varnish. Moreover, it is not once.
How to update the kitchen table
The easiest option is to save the surface of the table top. And the legs and side surfaces are painted. Or, for example, paint them in different colors. And pull the tight-tight beautiful oilcloth and consolidate it at the bottom of the stapler. If the countertop is completely falling apart, there are two options. Replace it with glass, and to build a backlight under it. Or not to throw away, but to lay ceramic tiles, such as a mosaic. And after thoroughly close all the seams by grouting. In general, the restaurant restoration has such a mass of available options that it will not be accurate to carry out its competent work.
Wooden tables
And what if the table made of solid wood has acquired an unsightly appearance with time? You can also bring it in order, only, of course, the process will be long enough. If your table was at one time just covered with varnish and does not have defects, then the procedure will be quite simple. It is enough just to diligently passionately (it is advisable to use a special typewriter for this), and then check several times. And the lacquer must be taken by several tones darker of the original coating. Well, if the table literally asks for a landfill, but it's a pity to throw out, then you need to prepare for a long update procedure.
Restoration of wooden table
We first prepare, as mentioned above. We think, and do not replace us with new ones new. If a positive decision is made, we go and buy. If not, you process the old exactly as all other parts of the table. We take a grinding machine and carefully remove all the old coating. First we work with a large grain discs. When all the paint or varnish will be removed, we take a small-grained disk and smooth the surface. Now we close all the defects, even the smallest. We use for this when the patchwork will be angry, they are also cleaned.
The entire procedure must be done very carefully, as even the smallest chips and scratches will be noticeable. Then degrease all the surfaces using a special composition that can be bought in any construction store.
Remember: each stage takes time, before applying any next composition, wait for the previously drying of the previous one. After degreasing, we apply a primer. And not the first one, but acrylic. When the ground dries, spool the surface again, but manually, gently and gently. And you can start painting. As an finishing coating, you can choose a varnish or dwell on the paint. Today there is a very large selection of all kinds of compositions, the main thing is that they are high quality. So buy a varnish or paint from the proven manufacturer, you should not save on the coating. Also carefully come to the choice of brush. The poor quality will lift and leave after themselves the hairs that the beauty of the surface will definitely not add.
It is advisable to apply three layers - with a break, naturally - varnish or paint. When all the elements of the table are finally dried, proceed to apply the protective coating. As a rule, wax uses for these purposes. It is applied to the cloth and diligently rubbed into the surface. So that the updated table serve you for a long time, wait for the final wax froze. This will require a week.
Conclusion
As you can see the restoration of the table - the process is creative and sometimes, unfortunately, a long enough, but nevertheless bringing satisfaction. However, not only. After all, if you do everything right, you can save yourself from unnecessary spending on the purchase of a new interior item.
People like that houses are surrounded by beautiful things. Over time, the interior of the premises loses the gloss and comes out of fashion. Sometimes it's easy to get rid of the beloved subject, because he witnessed many pleasant events of the past, and the acquisition of new furniture not everyone afford. But you can solve the problem, restoring the old thing. In this case, she does not have to throw out, it will look in the room fresh and creative, and cash on the update will go much less than on the purchase of modern furniture.
Recently, people prefer to restore the old things with their own hands. This process is creative, interesting and completely simple. Especially love the hostess experiment with such interior items as coffee tables, because they can then be shifted to guests. There are many ways to restore these things. How to update the coffee table at home to turn it into a small masterpiece?
Restoration of furniture
People in different ways embellish the old interior items, they are updated by varnishing, painting, processing equipment decoupage, tight leather, tissue, oilcloth, tile cladding.
Thanks to some technicians (cracker, bracking), the tables are artificially aumed, and things whose age does not exceed 10-15 years, look like products of half a century or century ago, giving premises of the spirit of antiquity. Many restoration lovers love to combine several techniques together, for example, combine the decoupage technique with a cracker. By applying these methods for the restoration of the coffee table, the owners will receive an interesting thing that will fit in a new way into the room design.
Back to the category
Table Update in Decoupage Technique
Since we are talking about the restoration of the coffee table, the most original and beautiful solution will not be covered with its cloth and not a simple varnish coating, but an update in the fashion technique decoupage. Its essence lies in the fact that appliques or whole pictures from special napkins, wallpaper, geographical maps and musical sheets are placed on the surface of the table top, and then cover the products with varnishes. To fulfill this work, you need to take care of the materials and tools you need in advance. In addition to the aforementioned paper and napkins, it will be:
- screwdriver;
- sandpaper 2 types (finely and coarse);
- primer;
- white acrylic paint;
- watercolor;
- acrylic contour;
- pVA glue;
- cabinch furniture varnish;
- ordinary or curly scissors;
- flat brush (flots);
- watercolor brush.
The coffee table before the update will be better to disassemble, separating the tabletop from the frame and driving the legs. It must be done in order to remove the old varnish or paint even with the most hard-to-reach places. Then it should be well treated with all parts of the table first coarse-grained, and then fine-grained sandpaper, the front side of the tabletop is especially thoroughly polished. After that, the piece of furniture is twisted with bolts. The next stage of the work is the primer of the coffee table with the help of flushing and painting it with white acrylic paint. It is advisable to apply at least 2 layers acrylic on all the surfaces of the thing, while drying each layer for 5 hours. Otherwise, paint under varnish can go spots or crack.
Preparation of the surface to decoupage: 1. Selection of drawing; 2. Alignment of the surface; 3. Applying soil.
Then the aerosol varnish easily falls on the surface of the table top. After drying it, it is embarked on the creative process itself - cutting decorating elements from napkins. Do it better with special scissors. To cut the drawing from wallpaper or trim the edges of the geographic map, conventional scissors will fit.
When applications are ready, they should be moistened with water. Wet napkin elements in accordance with the intention are decompressed on the surface of the tabletop, lubricated PVA glue, and smoothed with a flat tassel. But a tight map or wallpaper drawing is better to soak for a few minutes in the water. The surface of the table in places under the application in this case is lubricated with a mixture of PVA and water adhesive (1: 1 ratio). When glue dries, you can draw some parts of the watercolor appliques. To make the images look at volume, use acrylic contour. Finally, the entire surface of the table is covered alternately with two layers of acrylic varnish.
Back to the category
Tabletop in machinery cracker
You can, along with a decoupage, be a special crochelle varnish, which forms a crack on the tabletop and, thus, will make it "ancient". For work you will need:
Decor process in the technique of cracker: 1. Applying cracks; 2. Application of crochelle varnish; 3. Application of primary color.
- acrylic paint of two colors (brown and white);
- lacquer furniture;
- tassels.
All stages: Grinding and primer surface, the preparation of applications, their gluing and the final coating of the lacquer will be performed, as in the above method. But in the middle of the workflow, changes will occur. It takes a few layers of dark paint on the primer tabletop and give it to dry. The surface will need to be covered with a crockel varnish. You should not wait for his final drying, the lacquer must remain sticky and only slightly hardening. Then the table top is painted with white acrylic and dries. An hour later, the product will begin to be covered by cracks, through them will peel the dark paint. When acrylic is finally driving, it will be necessary to stick appliques to the surface of the table and at the end to cover it with furniture varnish.
Often, this old, who has lost its freight in the kitchen, explicitly falling out of the overall style of the room, is a reason for disputes: it seems to be time to replace, so as not to port the interior - however, it is sorry for it, and the funds do not allow you to "scatter" furniture, Let even a considerable period alone.
Dilemma: Restoration or decoration?
Old, but still a strong dining table, especially if it is made of metal or from a wood massif, could live for a very long time, if the working surface is not affected and long use, or a design that is no longer suitable for the style of a new kitchen.
All work on returning to the life of this important part of the kitchen interior, with the restoration of ordinary functions or their change, can be divided into three categories:
- Restoration;
- Restoration with a change in design;
- Decoration.
At the options, how to update the old kitchen table with your own hands in the best way, you should stop more.
Restoration. This type of work is carried out if the furniture is perfect for the kitchen interior, but lost a presentable type in the course of long exploitation, or the fortress of the structure suffered.
Before proceeding with restoration, you need to stock the following materials and tools:
- Grinding, emery paper of various grainings;
- Glue for wood or metal (depending on the material of the podstoly);
- Putty for a substantial material, primer;
- Special paint of the desired color (on wood or metal), intended for internal works, as well as a small roller and tassels.
In case the metal frame, the restoration process consists of the following steps:
- Dismantling countertops;
- Surface cleaning from old coating;
- Speeding surface for better staining - a special composition of putty for metal allows you to make a surface smoother, preventing it in the future from oxidation;
- Grinding - necessary in order to remove various roughness to prepare a surface for staining;
- Priming - can be performed using special compositions, and you can use the basic paint with the addition of the solvent;
- The paintwork coating of the frame should consist of at least two layers. Moreover, each new layer of paint is applied to the already referred to the previous layer.
- The tabletop for the renovated metal frame can be performed as follows:
When restoration of wooden furniture, the sequence of stages does not change. However, before proceeding to restore such a surface, it is necessary to strengthen the entire design of the product:
- Carefully inspect all connections units, if necessary, consolidate them with glue, furniture corners or confirmates (furniture screed). In the presence of moving connections - check their functionality. If the mechanism is damaged: repaired it, replace, and if such a function is not important - to make the node static.
- Remove the preserved decorative elements and accessories that may suffer at further work;
- Countertop, if it is not planned to be replaced, it is not subject to dismantling.
- Next should be rid of the old coating - to carefully sand all surfaces, including internal frame elements;
- If there are potholes and chips on the restored planes, the seams in the connection places - you need to sharpen them with a special acrylic putty. The table top is better to level the special composition: in PVA glue or carbon black glue to mix small wood sawdust and this mixture fill the existing excavations. After drying the glue, all design elements are sanding again;
- If the surface managed to align so that the defects began to be invisible, and the tree retained its original structure - it is possible to cover the table with toning (transparent acrylic paints that give any shade of wood, and its fibers that do not hide the drawing);
- After applying the first layer of paint, all elements of the design should be carefully polished - to remove the ripped fibers of the wood;
- The subsequent 2 layers of paint are applied with a gap within a few hours (so that each humor toward each time);
- Finish finish - varnishing: for kitchen furniture It is necessary to choose a special varnish, which gives a coating, resistant to mechanical and temperature effects.
- After the varnish is dry dry, the working surface of the table should be covered with several layers of wax - it will give it additional water repellent properties.
- Clear from all pollution (especially fat spots) with detergents. Carefully dry.
- With the help of grinding, clean the surface, getting rid of the old lacquer coating - the paint is bad on it.
- Apply primer (preferably protected wood from moisture penetration) - with roller, tassels or aerosols. Be sure to give her to dry well.
- Color to the right color 2-3 times, causing layers as evenly possible, giving time to dry each of them. After applying the last layer, leave the product for the final drying at least 24 hours.
- Apply a wax paste and, with the help of cotton wipes, circular movements carefully launched in the worktop - repeat the procedure 2-3 times to get a matte not sticky surface.
Your old table in a new guise is ready: you need to give him about a day to stand up without work, and he will serve you for more than one year!
Construction Restoration
Such design is another way, like from the old kitchen table to make a new, more spacious.
In this way, you can go if you purchased a new table in the kitchen, and the old one is still good enough to throw it.
In addition, you can simply renovate it by adding the "highlight" in the design. How to update the old kitchen table with your own hands in a similar way, shown in the photo - the process itself requires a somewhat more detailed description.
To make changes to the design, we will need:
List chipboard, 2 bar for legs, 2 planks from chipboard - all this size to make a table, in dimensions that fit under old kitchen. It is better to fasten the wheels to the legs of a small table - it will be more convenient for them to use, and the floor covering will be preserved better.
For the screed, 6 confirmates and 2 furniture corners will be needed, and to combine two structures - 2 aluminum corners equal to the width of the larger table.
In addition, we will need: Wood putty, enamel 2 combined shades, varnish and wax paste for finishing surface treatment.
Be sure that the "outbound" dining place will be enormous among younger family members - here children will be comfortable due to the smaller difference between the height of the chair and the tabletop.
Decoration - for every taste, style and ... wallet
This method of "resuscitation" of the kitchen table is the most exciting, having a variety of ways using the most unexpected materials. Inventing how to update the old kitchen table with your own hands using decoration, it is necessary to remember the strength of the coating performed - the surface must be resistant to changes in temperature, mechanical effects, and should be easily cleaned.
To decorate, you can apply the decoupage method, drawing up various collages on the tabletop (especially if used as a protective coating glass), painting and screen prints.
We offer you another one, in our opinion, a very interesting option - smalt decoration. Such a solution will be even more original if your masterpiece's work surface will be made of the same mosaic tile as the kitchen apron.
We will need:
- The remains of the smalt remaining from the apron, or several matrices (in the size of the table). As a rule, matrices with tiles are 300x300 mm, and the size of the squares of the smalt can vary from 10x10 mm to 20x20mm;
- Tile glue, grout and old waffle towel;
- Malyary Scotch, spatula and scissors;
- Paint one of the shades of smalt (on wood); end ribbon (better abs);
- Varnish and wax paste for finishing table tops;
1st step. Restoration and painting of surfaces - actions are similar to all similar products and are given above.
2nd step. The ends of the countertops are accumulating with painting scotch, and on the tabletop itself, the spatula is applied a thick layer of tiled adhesive, recalling it, and gently put in advance fitted in size and color of the matrix with a mosaic. Carefully press, trying not to shift pieces. It is necessary to carefully monitor the ends of the countertops (including the thickness of the smalt) remained smooth. Leave the tile to dry.
3rd step. We produce grout seams. To do this, diluted to the desired consistency, the grout is applied to the mosaic, align the spatula, removing the excess grout. Let me dry a little, and then remove the grilt with the wet sponge.
