Every day, the bathroom is used at least once with water treatments. Gradually, various debris accumulates inside the pipelines and you have to think about how to clear the blockage in the bathroom. There are a lot of options, due to which the siphon or other water communications are clogged: the hair of humans and animals, pieces of rags, grease, various pollution of the pipe system. Over time, the liquid leaves more and more slowly and a bad smell appears, which is emitted by the sink or bathtub. You have to do something about this.
What causes blockages?
The most serious reason for clogging a sink or bathtub is error during pipe installation. Making repairs, "craftsmen" are mistaken with the angle of installation of pipes for the sewage system, this, in turn, contributes to the occurrence of traffic jams. Cleaning in this case is possible, but pointless. The elimination of the problem must begin with dismantling the old pipes and reinstalling them.
The second more likely option is carelessness and neglect of preventive measures by the owners. Objects, hair and debris can easily clog the drain. Even with a slight blockage, it is recommended to get rid of it, so that the situation does not worsen even more. So how do you clear a blockage in your bathroom?
Ways to eliminate blockages
Mechanical tool # 1: plunger
If the hole near the drain is clogged, then take the object that most people have - a plunger. Then you should take a rag or cork and close the upper water drain hole so that there is no corridor for air. Then we lubricate the plunger rim with Vaseline, so we will ensure a tighter fit. We put the plunger on the drain, abruptly and intensively begin to drive out the pollution. It is quite possible that you will not be able to clean it the first time.
Mechanical tool no. 2: hot water plunger
If the previous method did not provide proper cleaning, then add hot water to it. We fill a third of the bath with water, pump it into the pipeline with a plunger, and then pull it out sharply. Continue until the drain is completely cleaned.
Mechanical device no. 3: rope
Doesn't take a plunger or hot water. What to do? Eliminate the blockage in the bathroom with a cable. Serious blockages can be removed with this tool. But keep in mind that it is possible to punch through thin plastic pipes if you are not careful.
It is quite easy to build a cable at home. To do this, you need to get a flexible metal wire. Then bend one of its ends in the form of a small hook, and wind the fabric to the second, making a handle.
Slide the attachment into the pipe to the expected clogged place and push through the debris. After removing the main part of the blockage with a rope, pull out the "fishing rod" with the rest of the dirt. At the very end, rinse the container with hot water.
Chemicals
In some cases, it is appropriate to use chemicals if the bathtub or sink is clogged. In stores, a large amount of chemistry is sold in the form of a gel, powder, liquid or foam that can remove all the bad things that are stuck in the pipeline in a few minutes. Organic contaminants are ideal for chemical removal.
- Before use, be sure to read the instructions included in the kit.
- Use personal protective equipment to avoid unwanted consequences.
- Buy products that dissolve hair.
Folk method number 1: boiling water
Traditional methods are no less popular and give good results. But, alas, removing a strong blockage in a sink or bathtub is impossible with the help of them. If the pipes or drain have accumulated a large amount of fat, then this can be corrected with boiling water. Just pour boiling water into the hole until the water starts to flow better.
Folk method number 2: vinegar and soda
Baking soda and vinegar react with each other, so they are able to remove more difficult pipe contamination. At the very beginning, the soda is poured into a glass, after which it is sent straight to the drain. Next, you should pour the vinegar into a glass and pour it into the drain as well and plug it with a cork. Foam will begin to form if the vinegar and baking soda react. After 15-20 minutes, rinse with hot water to rinse off any remaining vinegar and baking soda.
Folk method number 3: lemon
It is profitable to use folk remedies and it is convenient at home, but they do not always give the desired effect. But lemon will help get rid of light contamination of pipes. Squeeze the juice from one fruit into the sink and wait an hour or two. Over time, the sink or tub is rinsed with hot water.
How to clean the siphon?
The siphon must be cleaned periodically, but if you do not do this on time, problems can appear at the most inopportune moment. It is recommended that you rinse the siphon regularly so that the sink does not emit a bad smell. Now let's move on directly to cleaning.
Obtain an unnecessary soft cloth and place a container for water under the siphon. Open the fasteners and remove the flask. After all the water has drained out, gently clean the siphon. Then flush the device and install it back. Also, remember to position the nipple so that it does not rest on the bulb. Do not rush to clean the basin, first open the water. If nothing flows, then the siphon is installed correctly.
- Don't dismiss preventive measures. Doing them regularly will not waste a lot of time in the future.
- Install a metal mesh to collect any debris.
- In some cases, it will not be superfluous to use compounds that prevent blockages.
Now it became clear how to clear the blockage in the bathroom. After all, anyone agrees that it is pleasant and comfortable to be in a clean bath.