Installing the toilet with your own hands. Tricks when installing a toilet bowl that will make installation much easier

Replacement and installation of the toilet in the bathroom occurs not so often. This usually happens with the repair of the whole room and the apartment as a whole. Therefore, the caring owners are rarely taken for the fulfillment of the task at first glance. In fact, nothing complicated in the installation of the toilet is not your hands, especially yourself you will do it for free, while you will save the family budget. It is enough to carefully consider the action plan for the preparation of the installation, correctly select a reliable tool and armared the necessary knowledge of installing installation and toilet the toilet.

Preparatory work

Installation of the toilet properly starts with careful surface preparation. If a new repair is made in the bathroom and the floor is covered with tiles, consider what you're lucky and you can carry out the installation of the toilet with your own hands right on it. If the replacement of the toilet is not related to the repair, then it is necessary to pre-dismantle the old toilet and properly prepare the floor for the next edge.

Dismantling step by step looks like this:

I overlap cold water so that the toilet tank is not filled with a plum.
We drain the rest of the remaining water from the tank by pressing the drain
We unscrew the hose connecting the tank and the cold water pipeline.
We unscrew the toilet bowl attachments correctly to remove it. If the toilet bowl of the old sample may need a recording key or solidol to simplify the unscrewing of old rusty mounts.
After dismantling the tank alone, go to the fasteners of the toilet. In the Soviet times, the toilets were often screwed to a wooden board with screws, which was concreted later. Also, the installation of the toilet occurred on the sand-cement slide. In any case, you may need chisel, wrenches and hammer. Gently remove all traces of cement, screws and dowels.
Slightly turning and steeping drain, stepping the whole water remaining in it and carefully remove the plumbing product.
Carefully close the sewage hole remaining after dismantling to avoid access to the surface of poisonous evaporation. This can be done with a wooden or rubber plug, wrapped with a cloth.

After the old toilet is removed correctly, you need to decide how to align the surface under it. If he stood on a wooden board in a deepening, the board can be removed, and the deepening is concrete and strengthened with a metal sheet, then mount the toilet with their own hands.

If the faience subject of the interior was on a slide of a sandy cement mixture, it should be disassembled using a chisel and a hammer until the surface becomes smooth. Millinger with a metal brush may be useful.

Varieties of toiletzes

The toileties differ not only in form and color, but also by the method of installation, the shape of the bowl and other parameters. Let us consider in more detail some of the structural features of the toilet.

There are models with a funnel bowl, bowl with a shelf or visor-type and with a tilt of the back wall. Installation of the toilet bowls of different configurations can be somewhat different from the point of view of the design, but a step-by-step instruction of the installation of the toilet bowl with their own hands is the same.

By a method for installing the installation of the toilet, can be divided into floor and suspended toilets. There is also a hybrid version, which is also called the floor's outdoor. A feature of such a toilet is that his bowl is on the floor, like a floor, but the tank and all sewage communications are located in a false wall.

The advantages of the suspended toilet are the hidden tank, compactness and easy access to the floor under it. On the other hand, the hidden tank requires the arrangement of false panels and, on the contrary, reduces the area of \u200b\u200bthe bathroom.

One of the most convenient types is toilet with oblique release. Wide slurry prevents clogging, and the stability of the design does not require the attachment of the bowl. Installing the toilet with oblique release is possible, you can of course pay the services of the master and wait for the final result, but many people decide to take the situation in their hands and do it all free.

Required tools and materials

Before installing the toilet, you should stock the necessary tools so that at the right moment they were at hand. The list of tools can be demolished:

Powerful electric drill or perforator with a set of bers for concrete or tile.
A hammer.
Set of horn keys or adjustable key.
Roulette.
Pencil or felt-tippet.
Screwdriver.
Pliers.
Fuma tape.

In addition, you will need certain consumables and components:

Corrugation.
Flexible hose.
Sealing silicone with a pistol.
Toilet lining.

Step-by-step instructions for installing a new toilet

When all the preparatory work on the installation of the toilet is made correctly and materials are harvested, make a detailed plan step by step, how to install the toilet with your own hands.

Installation of the toilet of traditional outdoor design can independently be made in the following ways:

On a wooden stand
On epoxy glue
On Dowels

Fastening on the wooden basis step by step. If the replacement of the toilet is included in the general plan repair plan, it is best to install it on a wooden pillow with the help of fasteners, and subsequently concrete it correctly. When pouring the screed, the treated with a wooden basis is placed in the place of the presumptive installation of the toilet bowl. It should take into account the dimensions of the plumbing. The board is poured with a solution to the top and is subjected to long-term drying.

Installation of toilet bowl step by epoxy glue. The fastening of the toilet with epoxy glue will become an excellent option if in the bathroom is perfectly smooth floor:

The surface should be pre-dedicated with solvent or by any other substances.
Process is needed and the base of the toilet.
On the floor are made notches or marked pencil.
Next, the glue must be gently applied to the plumbing product or the floor at several points, as a rule, four of them. After that, the toilet is pressed against the surface for 12 hours.

Installing the installation of toilet bowl turns on screws. If the base base has holes for fasteners, it is advisable to install the toilet to the screws on the screws or dowels:

We place the toilet as close to the wall as much as possible or so that it will stand in the room.
You can in advance to connect the corrugation to the sewage system with your own hands, so that it should be visible at what distance from the wall should stand the subject of plumbing.
Through the holes at the foot of the bowl, we properly plan a pencil or a felt-tip pen of drilling holes for dowels.
We assume the toilet to the side and drill holes.
Mount mounting.
We establish the toilet with your own hands in such a way that the attachments passed through the holes in the toilet.
We produce a rubber or plastic layer-gasket so that the pressure of the bolts does not destroy the plumbing.
Tighten the bolts.

It is worth mentioning that some types of toilet bowls are sufficiently stable. Installing the installation of toilet bowl with oblique release does not require drilling and dowel.

A completely different principle of installation and installation of the suspension toilet. All sewage communications are hidden in the wall. For reliable mounting toilet bowl, a metal frame, laid in the wall, is used. It takes on it and the installation and installation of the suspended toilet is made step by step, and the hidden tank and sewage and tap hoses are neatly placed inside the design, which is then closed with plasterboard or clapboard independently.

Suspended toilet is distinguished by stylish appearance and higher cost. If you figure it out, connecting the toilet to the sewerage of a wall-mounted type is not much more complicated by the usual floor-mounted installation. You can easily master how to install a false toilet yourself.

Installing the installation of the toilet with your own hands: video

To find out in detail and clearly see how to install the toilet with your own hands, you are visited by video. After reviewing the video tutorial, you can compare the characteristics of your toilet bowl and independently connect to the toilet with your own hands step by step.

Installing the toilet on the tile with your own hands

The most complex is considered the correct installation of the toilet to the tile for several reasons. First, I don't want to spoil the new tile to anyone. Secondly, this material can be quite fragile, so requires particularly gentle drilling. Thirdly, the faience toilet should be sure to securely fasten on the tile, as its surface smooth and design can be shifted.

In the presented video, the correct installation of the toilet is shown in your own hands, it is on the tile of step by step, so carefully reviewing the video tutorial, we will absorb without any problems how to correct the toilet.

The video begins with the story how to install the corrugation on the toilet. We can also begin to change the order or a little.
In the video it is indicated that you need to measure the size of the room to install the toilet bowl strictly in the middle. This concerns a separate bathroom. If you have a combined bathroom, before installing the toilet to the tile, we need to pre-put it as it will stand in the room.
We establish the toilet to the tile, put it onto the wall, result in a pencil base, as can be seen from the video tutorial, how to install the toilet on the tile. We look at the same way of the opening of the mounts.
I turn over and inspect the toilet.
In places where holes will be clogged, you need to make notches so that the drill does not play on the tile and did not damage it.
I fix the car the desired diameter into the perforator and begin to bury the first in the mode without impact. Only after the tile is completely drilled, you can use the mode with a be conconna blow.
Insert a dowel and drive screws.
We establish the toilet with your own hands, we produce plastic gaskets and tighten the bolts.

Connecting a toilet to sewage with your own hands

After a reliable mount is made, you can switch to the connection of the toilet to the sewer system step by step:

First you need to install corrugations or plastic tube adapter with a bias of 45 degrees. Pre-edge corrugations can be mounted with silicone lubricant for trouble-free installation. If the corrugation is a little on the side relative to the sockeeling pipe, it is necessary to connect the toilet to sewage to the eccentric. Any gaps or irregularities between the corrugation and the riser can be corrected using a fum-ribbon with their own hands.
Connecting a drain tank. We place the drain tank on the bowl of the toilet bowl, pre-laying the sealing gaskets in the connecting places of the plumbing hoses.
Connect the flexible hose by one end to the entrance to the drain tank, and the other to the water outlet, as shown in the video.
Checking the connection toilet to the sewage riser for leaks.
It is possible to seal the base of the toilet to the silicone sealant.

When connecting the toilet, it costs to pay special attention to metal parts, like fastenings, screws and bolts. Over time, the moisture can be covered with a layer of rust, which is not aesthetically impractical. If necessary, you will be difficult to promote them. Therefore, pre-process them with solidol or other lubricant.

One of the controversial issues is the installation and connection of the toilet to the sewage in the wooden house. In fact, innovative methods of waterproofing make it easy to equip high humidity rooms in a wooden house. You can handle the walls of the bathroom and other rooms of the wooden house with special water repellent means and are not afraid of sculpture of wood.

Another feature of a wooden house is shrinkage several years after construction. To prevent it, the floor under the toilet in the bathroom of a wooden house should be additionally strengthened with reliable structures.

Cost of installation

If you need to replace or properly installing the toilet bowl, the first thing that interests us is - how much to install the toilet. The cost of installing the toilet is an experienced master in the capital is at least 1500 rubles. This does not include the cost of consumables - screws, corrugations, lubricants and the cost of dismantling if necessary.

You will have to buy them anyway, but if we have all the necessary tools for mounting and connecting the toilet to sewage, then the cost of all works is reduced exactly on the cost of ordering a qualified wizard. Many toilet installation operations can be performed free of charge, unless of course you will do this.

Unitaase Installation Video Tutorial

To secure everything read and clearly see how to install the toilet with your own hands, you can view the video tutorial.

The toilet has long been an integral sign of a landscaped apartment or at home. We went to the past "Outside Places". Now in building supermarkets and online stores, a huge range of sanitary devices is offered to the acquisition: traditional compact toilets, devices with hidden tanks, suspended, corner and even children's toilets. In principle, the installation of any equipment can be made with your own hands.

Do I need to install the toilet independently?

Of course, you can call for the installation of a specialist from anyone you liked the service organization, whether it is a management company or a office, offering installation services on the principles of autosoring. However (at least for the most common toilet models), the installation of such equipment does not represent special problems and is quite accessible after studying a small step-by-step instruction. In addition, the understanding of all the subtleties of the installation of toilet bowl will help you to qualitatively trace both the work of attracted specialists, will allow to detect hidden defects and disadvantages in the services provided.

Types of toiletz

In large supermarkets, showcases with toilet bowls sometimes occupy several dozen route meters. However, with all the variety of assortment, almost all the designs of the toilet bowls are no different from each other. Modern toilet consists of several main parts.

Actually bowl. It can be of various shapes (with or without shelf), with various water flushes (straight or circular), with a different design of its mounting to carrier bases (floor, suspended or angular), with various additional features (for example, with a built-in bidet and Even heated).
Uncleaning from the toilet, along with water from the flip tank, enter sewer pipewhich can also connect the bowl of the toilet bowl and the sewage line of various configurations of pipes and adapters.
Water for washing unclean accumulates in washed tank. This device can also have different installation options (attached directly to the toilet bowl or is placed in a hidden way of decorative partitions).

Usually plumbing devices are supplied with installation and operating instructions. But, nevertheless, some important nuances of installation of such equipment in the documents are not described.

If you do not install plumbing equipment in a new building, then the first stage of your work will be the dismantling of old equipment.

Remove the old toilet alone

Disassembled work looks easier than installing equipment, but even when they are conducted, some rules must be followed.

Step 1. Carefully process the toilet and adjacent space for disinfection. You can use the cheapest, such as chlorine-containing ("white"). Before starting work, put on protective gloves, and possibly safety glasses. Prepare a basin and rags to remove excess water.

Step 2.. Blind the water in the tank. On single-paced shut-off cranes, when closing the pipeline, the lever must be rotated perpendicular to the pipe. Drain the remaining water from the toilet bowl.

Step 3.. Disconnect the water supply hose. Depending on the model of your equipment, the hose can approach the tank from below, side or from above. Use an adjustable or wrench.

Step 4.. We unscrew the screws to which the toilet is fixed to the floor. In old houses, the bolts can be attached to the tight, so they will have to cut or even break the bowl of the toilet bowl. You may have to break the toilet and fastening to the cast-iron sewer tube. Best patience and passage. If you intend to leave the old tile on the floor, then be very attentive - sharp and heavy shafts of the toilet and excessive force when unscrewing the bolts can damage ceramics.

Step 5.. If your old toilet is attached to a plastic sewer pipe, it will be very simple to dismantle it. Pull out the toilet for yourself and pull out the release of the toilet from the sewage contact pipe.

Now you have access to the installation site of the toilet bowl. We will skip the moment of installation of plastic sewage (noting that the location of the inlet neck of the sewer under the toilet must match the tolerance intake pipe) to begin immediately to the installation of a new plumbing device.

How to mount a compact toilet with your own hands

To install a standard toilet compact compact, consisting of a bowl and drain tank, carry out operations in the following sequence.

Step 1. Check the condition of the inlet nozzle of the sewer pipe. If necessary, clean it. To prevent the spread of odors, it is closed with a throat with a rag or polyethylene film.

Step 2.. We place the toilet on the floor. If there is a certain distance from the exhaust tube toilet to the toiletty to the neck of the sewer, then we measure it and buy a suitable sized corrugation.

Step 3.. Included with the toilet can go "heel" - a soft lining under the base. If it is not, then you can make a lining yourself, for example, from an unnecessary piece of fine linoleum, cutting it along the contour of the base.

Step 4.. Gently by placing the unitaz-compact in the place of its future location, check the symmetry of the location relative to the walls, the distance to the furniture items, to the outlet mouth of the sewer pipeline.

Step 5.. Location on the floor Location of the outline of the base of the toilet compact and the location of future holes in the floor under fastening screws.

Step 6.. Move the unitaz-compact aside and begin to drill holes.

In the event that you have on the floor already laid tileThe top layer is drilled by a specialized drill without perforation. Next, the hole is deepened by the shock brown.
If the toilet is set on a wooden surface - Holes are formed by the usual tree drill.
If you have in the toilet lies linoleum, the hole to the lasting overlap in it can be cut through with a sharp knife.

Step 7.. In the drilled holes set the dowels.

Step 8.. We place the base of the toilet bowl and tighten the screws into the dowel. In the perimeter, the base of the toilet can be treated with a sealant in order to prevent moisture penetration.

Step 9.. We remove from a cloth or polyethylene from the cloth or polyethylene from the sewage pipeline and combine the release of the toilet and sewer. The place of the combination of corrugated and sewer pipe is also processed by a sealant.

Connect the tank to the toilet compact

There are unitaze-compact models in which the drain tank is a separate element. In order to mount the tank, you must perform the following operations.

Step 1. We select bolts for fastening the drain tank. Perhaps the bolts coming with the technique are not protected from corrosion, therefore it is better to use an anti-corrosion coating bolts (galvanized) or made of stainless steel. Also, each bolt should have at least two sealing washers. Twist the entire design. Sealing washers also protect the toilet ceramics from bolted damage.

Step 2.. Connect the flexible underwater hose. First, the locking nuts are intimidated and tightened with their hands, and then a spanning or adjustable key. Between the tank nozzle and the hose and between the hose and the removal of the water supply insert the sealing gaskets made of silicone or using a fum-tape.

Important! After installing the installation of the toilet and the drain tank, wait about six hours so that the sealant on the floor finally froze.

Install the toilet with a hidden tank

The most common types of hidden tanks for toilet are most common on the market: mounted or dotted. Depending on the model, select the installation instructions.

Install the hidden type tank for the withdrawal toilet

We install the toilet to the floor, as described above.
In the prepared niche, we mount the drain tank. It is usually screwed by bolts, as in the usual toilet-compact.
Install the frame for the decorative wall. This is usually a metal profile, which captures plasterboard sheets. From above, hyposphate is trimmed with a tile.
When installing plasterboard sheets, we provide a hole for the output of the flush control system. When installing a barrel with a fixed button, carefully calculate the distance from the tank housing to the surface of the future decorative wall. Typically, such dimensions are specified in the instructions. In addition, in a decorative wall, it is necessary to provide an inspection hole for maintaining a hidden tank.
We derive the control panel to the surface of the wall, we carry out the finish finish of the decorative wall.

Install the suspended toilet with a hidden bull

The installation of such a design gives you a favorable chance to redevelop the room of the bathroom, more rationally use its area. Installation of the suspended toilet with a hidden tank is carried out with the creation of an additional wall, which will hide all engineering communications. We act in the following sequence.

Step 1. Create a project of the future bathroom. The hidden tank has a certain thickness that needs to be considered when designing a new wall. It may have a control system (button), which is either directly fastened to the tank body, or is removed for a while.

In addition, when designing the supporting structures of the future wall, it is also necessary to provide for the creation of a power frame that will support the suspension toilet. It is impossible to do with a subtle aluminum profile, which is used for mounting plasterboard partitions. Power construction is welded from a metal corner. But usually the metal design for the pendant toilet is already included with the equipment. This finished design of metal is called installation. The fonts are attached to it, which will subsequently be mounted to the toilet.

Step 2.. After the preparation of the project, we begin welding work on the formation of the support frame and erect the frame from the profile under the plasterboard wall, or install the ready-made frame. The frame should have emptiness for the installation of sewer pipes.

Step 3.. We pave sewer pipes, withdrawing a receiving neck to the level of the exhaust pipe of the suspended toilet. Do not forget that sewer pipes when installing must have a specific slope.

Step 4.. Place the hidden tank in space for the future wall. Connect it with a pipe for drain water toilet. If the drain control button is located directly on the tank - make its outer vertical surface to go beyond the level of the future decorative lining of the drywall wall. Connect to the drain tank the liner hose. Then we connect the "current" suspended toilet and a hidden tank, putting and fixing the toilet on the pins and connecting the pipelines for the delivery of water and drain. Do not forget to check the performance of the entire design, the strength of its attachment to the firmware is plasterboard.

Step 5.. Remove the suspended toilet from the pins. Mount plasterboard sheets. Usually they are simply screwed by self-tapping heads to the profile. We form a hole under the tank drain control button. We make holes for font fonts to the toilet bowl, under the water supply pipe and draining the sewage into the sewer. The slots between the sheets of plasterboard are applied. To facilitate the formation of holes in the set of supplies of the suspension toilet, there is a special template on which all major outlines are indicated.

Step 6.. On the final stage of works on the walls, the finish coating is stacked, for example, tile.

Prices for toilet with hidden tank

toilet bowl with a hidden tank of hidden mounting

Installation of the toilet to the pedestal

As mentioned above, the toileties have a different configuration of the exhaust pipe. With a horizontal or oblique release of the toilet bowl, the receiving sewer tube is mounted on the same level with the base of the toilet bowl, its receiving nozzle is directed horizontally or swept up.

However, there are models of toilet bowls with direct release. In them, the graduation pipe is directed vertically down. Due to this configuration, the sewer receiving pipe must be lower than the base of the toilet. This design of sewage networks is not available in all houses. But what to do if such a model of the toilet do you like more than others?

The output is - installing the toilet to the pedestal (also this elevation can be called the podium). You need to perform a number of works.

Pour the receiving pipe of the sewage. Depending on what its bias is before entering the collector or to another pipe, the height of the pedestal is calculated and, accordingly, the level of the location of the toilet base.
After obtaining the necessary sizes, proceed to the construction of the pedestal. It must be installed on a strong, preferably concrete base. However, the adoptive toilet tube of such a design can be located in the interval between the piston and the draft wooden floor. When the toilet is located with a direct release on a wooden base, sewer networks need to be laid before the netting of the first floor.
On the concrete base, the pedestal can be built of bricks. Form a rectangle with a hole to enter the receiving sewer pipe. Bricks can be uploaded directly to each other, filling all the inner space of the pedestal, leaving a niche for the sewer pipeline.
From above, a brick pedestal is placed and closes with a finish coating, for example, tiled tiles.
Next, we make with a direct release as well as described in the section on the installation of a conventional floor toilet.

Install the angular toilet

There are unitaze models that are installed in the angle. It differs from the classic outdoor or suspended only by the fact that its drain tank has a rear wall in the form of a triangle. It is due to such configuration that the design can be installed in the angle.

The technology of installation of the corner toilet in principle does not differ from the installation of the "direct" toilet bowl of the corresponding design. The only thing that can cause some difficulty when installing the angular toilet is to sum up the sewer pipe. It must be mounted so as to ensure wastewater removal, possibly with a rotation of the pipeline.

In addition, the design of the toilet with hidden tanks with a straight back wall allows you to install them in the angle. To do this, the wall in the corner of the room is mounted in the corner diagonal, behind which the hidden hanging tank is installed. This design can be located both at an angle of 45 degrees to the walls, forming an equally chaired triangle and under other angles, forming a toilet space according to your wishes.

To familiarize yourself with the technology of self-installing toilet, see the learning video.

Video - Montage toilet with your own hands

In cases where there is a desire to save on the services of specialists, or simply learn a new construction skill, information is useful about how to properly install the toilet.

What you need to install

Before installing the toilet with your own hands, you need to take care of the availability of a number of tools:

perfederator or shock drill;
drive with a diameter of 8-10 mm (depending on the diameter of the dowel fastening of the toilet);
kaffle drill (if the installation is made on the tile or ceramic slab);
adjustable key;
set of wrenches;
a hammer;
sealant (either in a special tube, or with a gun for sealant);
screwdrivers (flat or cruciform, depending on the design of the toilet);
100 × 100 rubber loan cuff (if you need to connect to the cast-iron calculation);
a set of fasteners for installation of the toilet (if it is not included);
ragged and capacity for draining the remaining water from the old toilet.

Before installing the toilet, it is necessary to make some preparatory work. For example, you need to decide what exactly to connect the new toilet to the sewage sewage. Options are possible:

Corrugated cuff. This method is most economical, but in this case, the toilet cannot be attached close to the conclusion. It matters if the bathroom is small.
Straight cuff. Firmly and hermetically combines a bowl of design with a sewage system.
Eccentric cuff. Convenient if the system connection centers and the termination are shifted.

It is further desirable to replace the old flexible liner for water. The selection of the eyelid is based on how the distance from the compounds on the pipe with cold water to the compound of the airborne toilet mechanism. To this length should be added 15-20 cm.

If necessary, you need to pre-purchase adapters for threads in places of connection from flax or fuma tape.

In the case when a wooden stand is preserved under the old toilet, it must be deleted. It will help in this nail or puncher. It is possible to close the resulting emptiness with a cement composition, preferably fast frozen, and a spatula.

Dismantling of old toiletza

First you need to overlap water. Disconnect the flexible liner, pull the water from the toilet.
Then you need to turn off the drain tank. You can carefully, and you can use the hammer (if the old toilet is no longer needed).
You can quickly remove the toilet with the help of hammer and perforator.

Carefully so that the fragments do not fall into the sewage system, apply the tools in the place of mounting the toilet to the floor and the joint of the sewage device. Then the old bowl must be removed, thickening the water that remains.

Wooden board removal and floor alignment

After the old toilet is removed, you need to thoroughly clean the seawrage of the sewage from dirt and rust. Set into the nickname rubber transitional cuff 123 × 100, pre-covering the sanitary sealant.
Then plug the hole with a cloth, so that the smells do not interfere with further work.
Next, you need to remove the wooden board and pour the resulting emptiness with a remission.
Align over the floor with a spatula.

Marking and installation of dowels

The bowl of the new toilet to put on the planned place. Make markup through holes in the bowl on the floor, in order to see where to drill. The holes in the bowl of the toilet bowl are located at an angle, in which case the drill is also at an angle.
By marking, the toilet can be removed. Next, you need to drill holes in previously planned places and insert a dowel.

Fastening a drain tank toilet

In accordance with the instructions attached to the toilet, it is necessary to establish the reinforcement of the drain tank. This procedure exists some features.
Tighten the nuts of the drain and fuel valve are manually, while while holding the valve itself, thereby protecting it from turning and the possibility of damage to the gasket.
Valves should be installed so that during operation the movable elements did not hurt each other and the tank walls.
In case of uncertainty, a sanitary sealant should be applied as the walls of the tank and pads.

The drain mechanism is released collapsible to facilitate the installation process.

Installing bowls toilet bowl

The connecting cuff is fastened with a petal part for a transitional cuff 123 × 100, inserted into a sealant previously treated with a sealant. The output of the bowl of the toilet is inserted into the transition cuff until it stops.
The cuff should be checked so that the toilet bowl accepted the smooth position, and all the openings of the fixtures coincided.
To the surface of the floor, the bowl is fixed with screws with plastic washers. In cases where the surface of the floor is uneven, you need to use gaskets from plastic pieces to align the toilet before you finally tighten it.

Connection of the bowl and drain tank

Before installing a drain tank on the construct bowl, you need to put the gasket between them. For reliability and avoiding the gasket, it is better to glue it to a sea sealant in advance.

Securing the tank on the bowl, evenly tighten the screws. After that, set the tank cover and the plum button. Then secure the flexible eyeliner.

Checking the functioning of the system

At the end of all the work, you need to check - dial water into the tank and make a trial drain. The amount of water drained can be adjusted, how to do it is written in the instructions.

Inspect all the elements on the absence of any leaks. If they arose, check the tension strength and, if necessary, disassemble the node, reincarnated with sealant, then tighten as it should.

If the cause is a detail fault - purchase a new part and replace.

Set the seat of the toilet and fill the slots between the toilet and the surface of the floor with a sealant.

It is not difficult to fulfill this work, if you adhere to the above recommendations and rules. Good luck!

How to install the toilet with your own hands - step-by-step instruction with video

What is needed to install the toilet bowl. Step-by-step instructions for dismantling the old and setting of a new toilet with their own hands

How to install the toilet with your own hands

From our article you will learn how to install the toilet with your own hands. This is a fairly simple operation, provided that you are able to overlap the flow of cold water, and the feed and sewer pipes do not need major repairs. In this case, we will install a toilet bowl with the bottom of the tank. This option is simpler, since most of the weight of the tank in this case falls on the toilet. When installing a toilet bowl with a top tank, reliable fasteners will be required to maintain the weight of the latter (for brick walls it is not a problem, but in the case of walls from hollow materials you will have to resort to special tricks).

1. If the height of the floor undertaken in the repairs undertaken in the repairs undertakes, the height of the floor has changed, it is necessary to compensate for the difference using the eccentric cuff - the so-called toilet corrugation (for sewage) and the flexible hose (for cold water supply). In the case of large changes in the height, professional plumbing skills will be required.

2. If the floor in the bathroom is not smooth enough, the toilet is better installed on silicone sealant. You can use small wooden / plastic wedges, but here without sealant can not do, because it allows you to evenly distribute the weight of the toilet.

3. If the sewer pipes go down, via the floor, and not through the walls, you will need a rectangular knee or a flexible corrugated cuff. This is not the only difference, but the main one.

Build and installation of a toilet bowl

2. Follow the manufacturer's instructions for assembling the insides of the tank. The sequence of actions depends on the type of drain system used in the model you selected.

3. Make sure that all the details are securely secured, but do not make excessive effort when tightening bolts and screws.

4. In most cases, a bolts for attaching it to the toilet are sold with a tank. Do not forget to wear the washers and rubber cone gaskets before inserting the bolts into the holes intended for them.

Installation toilet with a tank installed

6. Insert the corrugated cuff (corrugated extension cord) into the sewer pipe, making sure it is tight fit. Our example requires a simple direct connective cuff. (When connecting the toilet to the cast-iron pipe, you will need a transition cuff with a diameter of 110 mm. See photo. It must be abundantly lubricated with silicone sealant and insert a cast-iron pipe with a dirty tube. See photo. Only after that you can insert a corrugated plastic cuff into it.

7. Move the toilet to the sewer pipe. Make sure that its release is on the same level with the installed pipe. Most likely, it is. But if not and the offset is quite large, then you will need to use an eccentric corrugated cuff.

8. Gently install the toilet to the place intended for it, putting the cuff to the outlet.

9. Ensure that the tank is smoothly located with an alcohol level by placing the last one along the back wall. Through the rear wall of the tank, mark the places on the wall where the holes have to do for its fixation.

10. Do the same with the toilet itself: Check it with a horizontal view through an alcohol level and mark on the floor of the mounting holes, trying to be as accurate as possible.

11. Mark the pencil on the edge of the base of the toilet. Knowledge of the exact position of "legs" will be useful to you when you finish the preparatory work and begin the final fastening of the toilet.

12. Move the toilet from the wall. Drill the holes for fastening the tank, focusing on the labels on the wall. Pick up (including the material of the wall) and insert the dowels.

13. Drill holes in the floor in the points you marked. When drilling a ceramic tile, you will need a perforator and a drill on concrete. At the beginning of the clock, the pressure on the perforator must be not large, after passing the layer of the pressure tiles can be increased. Insert the dowels into the holes. If the floor is wooden, as in our case, they are not needed.

14. Before installing the toilet in place, apply silicone sealant on the floor along the marked line with a pencil corresponding to the border of the "leg" base.

15. Place the toilet in its place. Screw the tank to the wall, inserting between the screws of the screws and the tank wall of the washer. Do not overdo it, tightening screws.

16. Screw the base of the toilet to the floor. In this case, the same rules apply: first, do not forget about plastic washers, secondly, do not tighten the screws too tight.

Water connection and installation termination

17. Connect the tank to a cold water tube. Low probably, you will need a flexible connecting hose. The connection site depends on the position of the inlet pipe on the new tank.

18. Turn on the water by opening the shut-off valve, and make sure that there are no leaks in all connectivity places. Also check the tightness of the articulation of the toilet bowl with the sewer and wake all the compounds with silicone sealant.

19. Install the toilet seat, as it is provided by its design. If necessary, adjust the seat so that it exactly corresponds to the form of the toilet.

20. Apply silicone sealant around the base of the toilet. Complete all the irregularities with a wet sponge, achieving a neat look.

How to install the toilet with your own hands - step-by-step photo instruction

Follow our step-by-step instructions and you will learn how to install a toilet bowl with your own hands and what is necessary for this

Installing the toilet with your own hands

If you first thought about the installation of the toilet, this article is for you. And it is better if you have time to read it before it goes to the store for a new "faience friend" or before the start of the finishing finish in the room of the toilet.

The fact is that modern toilets are so different that they strongly differ the type of fastening, washing, the supply of sewage, etc. So, Ideally, plan what kind of toilet it is to be installed with your own hands, you need to start at the toilet design.

Installing the toilet with your own hands

And what to do if there is an old "throne" in the toilet - how to remove it, avoiding the world flood? We will also talk about this in the article. Features of the installation process, step-by-step guide and several tips from the masters will help save money and mount the toilet with their own hands without any problems.

Planning space indoor toilet

It is impossible to plan a comfortable toilet without taking into account the peculiarities of the toilet bowl, which is to be installed there.

To understand what exactly needs to be done, you need to know:

it is necessary to dismantle the toilet, which served his own and pursue the overhaul in the toilet (including cladding, repair and supply of sewer communications and the tie of the floor);
what are the dimensions of the new plumbing - whether it will not climb the space and whether it will allow you to relax to open your door;
what is the mount from your future toilet;
what is the method of draining to the toilet;
at what height you want to install plumbing.

If you know the answers to all these questions, it remains only to disassemble the old (if necessary) and the installation of a new toilet bowl.

Recall that the floor plumbing is divided into several types. It varies with the shape and its device.

The tank for plum is combined with a bowl of the toilet and independent (wall).

To the floor of the toilet bowls are fixed: on 2 and 4 point of attachment, on the corners.

Down with the old toilet!

Surely your toilet to be dismantled is not wall mounted, which means it is attached to the floor. Remove it from the toilet will be able to only 7 steps.

Turn off the water and drain it from the tank in the toilet.

Before breaking the toilet, you need to turn off the water supply and unscrew the tank

Dismantling of old toiletza

If the neck is disconnected from the pipe, and the toilet is glued with a solution to the floor, then it is necessary to take a chisel and neatly split the pedestal from the solution, can be parts

If there are no plans for the old toilet, and you escort it on the last path, then after swinging it can split a sledgehammer so that it is not difficult to endure it. You will also have to do in the event that it is cemented by the attachments of the old plumbing.

After dismantling the toilet, estimate the condition of the pipes in the room. Cast iron creates many problems, before installing the new plumbing, it is recommended to change them on plastic. Also, plastic pipes are very easy to facilitate the process of installing the toilet and wiring of sewer plots (by the way, you can also read on our own plastic pipes on our website).

Independent installation of plumbing "By steps"

Toiletz for normal operation is needed smooth, lined or specially prepared surface of walls and gender.

First, blocking the toilet with corrugations connect with the tap of the sewer pipe-rising. You can also use a hard pipe. The best option is if the blocking of the toilet is included in the riser without extension corrugations, etc. To seal a drain, we use a ring with rubber border. It is important to consider that the rubber does not tolerate on its surface of cement and similar sharews. But the sealant is quite suitable.

Installation of toilet - cuff

We take the cuff and apply silicone sealant and install it in the pipe

Then take the corrugated pipe and also apply silicone sealant

Install the corrugation in the pipe

Then gently injecting the toilet and install its output to the corrugated pipe seal

In order to wash water during washing floors, this place can be sealed with silicone sealant

Fix on the floor: 3 types of fasteners

The first option for floor installation is anchors laced in the screed. During the fill of the floor in place, where the toilet and its attachments will be located, long anchors are fixed. After the screed dry and the floor finish will be carried out, the toilet on the anchor. This is the most difficult way of fastening, as it is difficult to install an anchor so smooth that the toilet to get on them without problems. It often happens that inexperienced builders choose too short anchor, for which then it is impossible to wind the nuts. The anchor mixed into the floor should be at least 7 cm above the finish surface to fasten the toilet to it. Under all nuts, gaskets are required so that the surface of the toilet is not lightering.
The second version of the reliable fastening of the toilet toilet on the surface at the surface of the toilet is an installation on a wooden basis. The main thing is that the board strictly coincides with the size of the toilet base. When pouring the floor, the board is prepared, scoring nails into it. Then it is placed in a solution with nails down. After drying the screed and decoration of the room, the toilet, pre-planted on the epoxy resin layer, is screwed to the blackboard using conventional screws. They also need rubber or polymer gaskets.

Fasten the toilet bowl with a wall tank without screws, one resin. True, with this method of fastening, it is necessary to predetermine the surface of the tile so that the glue holds better. When using "epoxies" it is important to give freshly installed plumbing to dry and fasten on the floor surface.

Mounting toilet to the wall

How to Install Installation

Outboard toilets are used more and more. The installation is not much more complicated by the usual (by the way, you can read on our own toilet installation on our website). Wall toilet, as it is clear from its name, will not have contacts with the floor surface. It is suspended with a metal frame, which is attached to the carrier wall itself. Tank and toilet pipes in this case are behind a false-wall from drywall. If the hinged plumber has an open tank, then it will turn it out on the wall itself, but then the sewer tube must be inside the wall. Hold the design will be the same anchors embedded in the wall or into the carrier frame.

Installing the toilet to the pedestal

After fixing the bowl of the toilet on the wall or on the floor, it remains only to collect a toilet. On the basis, the tank is already reliably fixed, the trumpet from the tank hanging on the wall is supplied to it.

Installing the toilet to the pedestal

It remains only to check whether the toilet works, and there is no leaks. We turn on the cold water, we wait until the tank is filled by adjusting the level of filling. We configure the instructions to the locking mechanism. We wash and look, does not flow from plum.

The last action is to fasten the stoolchak. But here you are probably already cope with yourself.

Before buying plumbing, first decide with the suggestive type of drain. If you do not plan to change the supply of sewage riser, you need to choose the same type that in the worker who has spent its toilet. Remember: no adapters will help you to qualitatively connect the toilet with an unsuitable type of removal.
Do not leave the choice and purchase of the toilet at the final moment of repair: it is better to prepare a place in the toilet in advance to facilitate the installation of plumbing.
Do not regret money on nickel-plated bolts and anchor for fastening the floor toilet or to the wall. They do not rust, which means, exclude ugly drips and bolts.

Installation of the toilet, with their own hands, was successful

Installation of the toilet with your own hands - step by step instructions!

Find out how the installation of the toilet is performed with your own hands. Step-by-step instructions, lessons, photos + video and best advice from professionals!

How to independently install the toilet

Having "straight" hands, most of the work on the house can be made independently. This category of work includes the installation of the toilet. Knowing a sequence of action installation or replacement can be made with your own hands.

Installation of the toilet with your own hands - the task of the average difficulty

Types of toilet bowls

In this article, we consider consider not the peculiarities of the washes or shape of the bowl, but those, features of the design, which determine the list of installation work.

By Montaja method

The toilet itself consists of a plumbing bowl and a drain tank. A bowl may be floor mounting or suspended. If the bowl is suspended, then the tank goes hidden editing - built into the wall. In the case of an outdoor bowl, there are three versions of the tank mounting: on a special shelf on a bowl (compact), separate, connected with the help of a flexible hose, in installation (hidden in the frame wall).

Typical dimensions of toilet bowls of different designs

The dignity of the outdoor toilet with a conventional drain tank is the simplicity of installation. It can be installed not starting repairs. The disadvantage - compared to the suspension, it takes more space, looks more heavy. Accordingly, there are complex models in the suspended models - it is necessary to fix the supporting structure - installation - in the wall. Perhaps this is only during repair.

Issue in sewer

The choice of toilet bowl in the sewer depends on the location of the sewer pipe. They are:

with horizontal release;
oblique release;
vertical.

Types of issues (outputs) toilet bowl

If the pipe is in the floor, the optimal will be the vertical release. If the exit in the floor, but is close to the wall, it is more convenient than oblique toilet bowl. The horizontal version is universal. Using the corrugated nozzle, it can be connected to the wall and in the floor.

Installation of a toilet bowl with a bunch of compact (outdoor option)

From the store usually brought separately bowl of toilet bowl, tank, drainage device and float. Before installing toilet bowl, everything except the float must be collected.

What is the floor toilet with a Bach type "Compact"

Begins the process from the installation of a drain device. It goes in the assembled form, it is only required to install in the hole in the bottom of the tank. A rubber gasket is stacked between the drain and tank.

We establish a drain mechanism inside the tank, putting a pre-rubber gasket

From the reverse side, the plastic washer is screwed into the nozzle. It is tightened with hands, then - using the key, but very carefully, as it is easy to break the plastic. So that the drainage device does not spin, it must be with hand.

Gently tighten the nut

The next step is to install fastening screws to the tank. They are also included in the staffing. These are long thin screws from galvanized or stainless steel. They are inserted into two small holes on the bottom of the tank, rubber gaskets put on, then the washers and only then screw the nuts.

Install the fastening screws on the tank

Before installing the tank on the bowl of the toilet bowl, the gasket (in the kit) is stacked under the tank. So that the smells did not smell from the sewage, it must be "put" on the sealant. We observe first on the one hand, we put on the toilet, we scroll on the other, put the tank.

We mark the gasket with Silicon, put on the toilet

Missing on the other hand

Install the tank on the shelf of the bowl, passing the screws into the appropriate holes. From the bottom to the screws wear washers, nuts, tighten. Make sure that the tank stood smoothly.

Install the tank on the bowl

Next, we put the float - the water level control device in the tank. At the top of the tank there are two holes. Here in one of them and insert the device. It is mounted on the side with which the plumbing will be connected.

Put in the tank float

On the outlet nozzle we swell a little flax, we wash the plumbing paste, set the corner (brass or stainless). Do not tighten the connection strongly, do not score that the plastic pipe.

Installation on the floor

The toilet almost collected, you can put in place. To the sewage toilet is connected using a corrugated adapter. At the ends, it has rubber seals that are tightly sit in the pipes and to issue a toilet bowl.

Corrugation to connect toilet to sewage

If the sewer tube is plastic, the corrugation is simply inserted until it stops. If the cast iron is still not new, so that the smell does not flick through the microcracks, the pipe is clean to metal, wash and dried. A layer of sealant is applied to dry clean metal around the circumference (at the bottom a little more), then insert the corrugation. For greater confidence, you can walk the sealant and outside the connection.

In order for the installation of the toilet to the old cast iron was a hermetic, under the corrugation you can lay a layer of sealant

In any case, insert the corrugation in the sewer tube.

Insert the corrugation until you stop

The second end of the corrugation is put on the release of the toilet. This is the connection to the toilet to the sewage. Everything is so simple. Only there is one nuance. To then be removed, the output of the corrugation and the release of the toilet is smeared with soap moistened in water, only the fools are put on. If this is not done, remove the toilet, without damaging the corrugation, it will be problematic. But you will have to drill holes under fasteners. It will be much more convenient to remove, and not try to move partially fixed instrument.

Nadiv Corrugation for the release, exhibit the toilet as it will stand. By installing a cover on the tank, check the place for it. Next, you need to sit down, check the comfort of use, if necessary, adjust the position. Then take a pencil or marker, inserting into the holes in the sole, mark the places for installing fasteners.

Celebrate places for fasteners

After removing the toilet, the openings under the dowel are drilled in the marked places. If the set is plastic fastener, do not use it - it will break in a few days. We must immediately put powerful dowels.

If the toilet toilet is installed on the tile so that it does not cracked, the glazed surface is better to put it. Take the touch, put in a mark, several times beat the hammer on it. This is called "Land". Then take a drill or perforator and drill the tile by turning off the shock mode. After the tile is passed, you can turn on the perforation mode.

Drill holes under fasteners

In the holes put plastic tubes from the dowels. They must be in the same plane with the floor. If there is a thicker edge, cut it with a sharp knife.

We swell the floor, removing the dust at the installation site of the toilet bowl. We put it in place, insert a dowel into the holes, twist them with the help of the corresponding key. Tightening the bolts must be alternately on the one hand, then on the other. Tighten until the toilet will become firmly without a backlash.

Latest barcode - connection to the water supply. Connect the output of the tap pipe with a crane installed on it with a bunch on a tank, which was previously connected. This requires a flexible hose. At its ends there are cape nuts (American), so that there will be no problems with the fastening. Tighten well, but without fanaticism.

How to install a suspended toilet with installation

To install hanging toilet bowls, the output of the sewer pipe must be located near the wall. The specific distance from the wall is indicated by the manufacturer, but must be small - from the far edge of about 13-15 cm. If the outlet out of the floor, there is a solution - a special pad, with which the stock is moved closer to the wall.

Installation of the suspension toilet begins with mounting to the frame of installation of the stops into the wall. They are attached two top and bottom. With their help, the distance to the wall is adjusted, the frame rises and starts.

Install the upper stops

The upper stops have the type of rods, are adjustable using an end key and screwdriver. The lower stops are more similar to the plates, they are also adjusted by the end key but with the side arrangement of the head.

Lower stops and height adjustment

The collected frame is attached to the wall, its center is exhibited over the middle of the sewer exit. The label on the frame rises or descends to the desired manufacturer height (there is a frame on the frame, also indicated in the passport, it is usually 1 meter).

Put in height and from the wall

With the help of a bubble level, the horizontal and verticality of the installation installation for the suspension toilet is checked.

Adjusting the height of the stops, an equal distance from the wall specified by the manufacturer is set. How it is convenient to do, look at the photo.

Set the set distance to the wall

The displayed frame must be fixed to the wall. In the appropriate places put marks with a pencil or marker, drilled holes. They are installed plastic hulls of dowels. Most of the suspended toilet bowls of imported production, and they recommend the hulls of the dowels to plant the sealant. In the drilled hole, some part of the sealant is squeezed, a dowel is inserted. Then, before installing the fastener itself, the sealant is superimposed in the plastic case.

In fixed installation, you can put connecting elements - nozzles, couplings. All of them are included, just fixed in their places.

Mounted nozzles and couplings

Tank and sewage pipes are installed

Next, metal rods are installed on which the bowl of the toilet will hold. They are screwed into the appropriate nests, on top on the silicone seals (on the bottom photo it is two rods over the sewer output).

Toilet holders are installed, sewage pipe is fixed.

The sewage pipe is put forward at the desired distance, fixed in a specified position using a bracket. It covers the pipe from above, inserted into the groove until it clicks.

Then water is connected to the tank. Open the tank cover (it is on latches), the plug on the side surface is removed. On the right or left - it depends on where the water is supplied. A corrugated pipe is inserted into the opening hole, the response part is inserted from the inside, everything connects with the help of a cape nut. It is necessary to delay without applying excessive efforts - it is plastic.

Connecting installation to water supply

A tee is installed inside the tank, the pipe is connected to the desired output (usually plastic). Do it with the help of adapter and American.

Connecting a tap pipe

A hose from the tank is connected to the special input of the tee. It is flexible, in a metal braid. Tightening with a cape nut.

Connect the hose from the tank

Install the lid. In principle, installation for the toilet is established. Now it is necessary to close it. To do this, make a falseland from moisture-resistant plasterboard. It is recommended to put two sheets, but one can and one. Hyposparboard is attached to the installation frame and to mounted profiles.

Fastening Fallest to the Frame of Installation MUST

The toilet is put on the pins, its release enters the plastic socket. The compound is sealed, additional measures are not required. This installation of the installation with installation is completed.

Installation of the toilet with your own hands: Outdoor, suspended with installation, instruction with photos, video

Independent installation of the toilet will save a solid amount of money. You can install an outdoor model and suspended with your own hands, with installation.

If you started the overhaul of the bathroom, or the plumbing failed, then you may need to replace the toilet. This process has a number of features that need to be taken into account, and the approach to the choice of the new toilet must also be correct.

Of course, you can call Plumbers from Jeep, or contact private crafts, which will ensure professional installation. But the installation of the toilet with your own hands will not only save your tools, but also allows you to understand the whole process, which means you choose the most appropriate installation option.

In this article, we will tell you in detail about everything you need to repair your toilet to help make all the work on your own.

The first thing to decide is: what toilet to choose

Replacing the toilet in full - this is part of the complex, so it includes:

selection of a new toilet, taking into account the methods of fastening and plum;
dismantling the old toilet;
repair of the toilet room, including the replacement of pipes, ties, cladding and other things;
installation and connection of a new toilet bowl.

Buy new toilet should be purchased in advance, and at the same time you need to consider some features that will help make the right choice.

Outdoor toilets are divided into several types of design. Their differences are based on the form of the main nodes.

The form of the output plum can be horizontal, vertical or oblique, at an angle of 45 degrees.
The toilet bowl can be visor, plate or funnel.
Also, models differ in the type of drain tank: it can be combined with the base of the toilet or mounted on the wall, and at different height.
Disasters to the toilet bowls to the floor. This may be an option with two or four points of consolidation, or a design in which the toilet is installed on special corners attached to the floor.

Tip: Choose a toilet, based on the type of drain. If you are not going to change the sewer pipe, then take the model with the same type of drain, as in the old toilet bowl. No adapters will provide high-quality toilet bowl with vertical and direct output.

Tank Connection Method will determine the types of further facing work in the toilet room. For example, if you have chosen a mount to the wall, you will need a prepared place and anchor for installation.

First of all, the water supply is overlapping inside the drain tank, the water is drained from it and unscrewed underwater hose. After that, the tank mounts are unscrew. If they rusted or covered with lime sediments, you need to hold the head of the bolt bolt, unscrew the nut with the recording key. Use kerosene or aerosol lubrication - these funds are significantly softened by rust and lime raids.
After the tank is removed, unscrew the fasteners on which the toilet is kept - dowels or nuts scored on an anchor.
Now you need to disconnect the drain from the sewer pipe. If your home is still an old building, then the plums will most likely be fixed. In this case, you will need a hammer and chisel. Position the chisel across the coolant and carefully tackle cement in two places. Shake the toilet with effort so that the drain is checked and loosened. Tilt the toilet, without disconnecting that the remaining water merges from it.
After the removal of the toilet is finished, close the hole of the sewer tube with a wooden plug or tape from the fabric.

Disassembly toilet does not require much accuracy, because you are unlikely to use the product again. Therefore, in case the cement coating is too strong, you can knock off part of the toilet bowl to facilitate work, and then do the transverse hole in the pipe, insert a metal rod into the lever there, so that it is easier to break the drain.

Notice: If you have drain pipes from cast iron in the apartment, then it is better to replace them with plastic immediately. Operation of PVC pipes is much simpler, both for initial layout and when connecting all plum locations.

Process installation process with your own hands

After you dismantled the old toilet or conducted all the work on finishing, prepare the surface, align it and proceed to the installation of the installation of the toilet bowl.

Secure the roasting pipe or corrugated pipe to the blocking of the toilet, for articulation with a tap tube of sewage. The optimal version will be the option in which the blocking of the toilet goes into the tap of the pipe itself. Use the rubber seal with convection. Do not close the transition of the drain into the seed sewage input.
Prepare water input. For this, a flexible hose is well suited for an entrance to the tank and water supply faucet. Pay special attention to the diameter of the hose fasteners at both ends.
After the connection is made, you can fix the toilet on the wall or floor. Below we will look at this process in more detail.
Build a toilet bowl. On the base, predetermined, install the tank. If your tank is suspended, secure it on the wall and move the pipe. Now you can check how the tank settings are correct and the toilet is operational. Turn on the cold water, wait for the tank. While the water will be closed, you can adjust its level. You can learn more about this from the instructions for a tank.
The last stage is the addition of stools. On the top of the bowl of the toilet bowl there are holes for its fastening, and the required parts are supplied.

Now we consider in more detail the methods of fastening the toilet, as well as the features of each of them.

How to install the toilet, given any little things

Typically distinguished three options that the toilet is mounted to the floor:

installation using anchors filled into a screed, or dowel;
fastening the toilet bowl with screws on the wooden base, pre-mounted in the screed;
installation on epoxy resin.

If you decide to change the toilet due to overhaul, the most suitable option will be anchor mount or prepared wooden foundation. In this case, the anchor for fastening the toilet is placed on the floor when forming a screed. It is necessary to establish them so that they performed above the surface by 5-6 cm. Excess then can be cut off.

Pick up your taffeta (wooden board) under the size of the bowl of the toilet. On the entire surface, you will hammer in checker-order nails so that on the other side they performed. Now turn the taffette and install it where the toilet will be located. Pour the screed concrete on the top edge of the board, install the toilet and carefully fix with screws.

For mounting the toilet bowl on the tiled surface, there are also certain rules. Under the nuts and on a dowel, we definitely wear rubber gaskets: they will not allow the toilet to crack when tightening and prevented rusty flips on ceramics. Use nickel plated anchor and bolts, they are easily unchecked even after the service life is expired.

Tip: Installing the toilet on to prevent the appearance of its appearance, use the fastening on the epoxy resin or dowel.

Under the dowel will need to do through the tie and tile of the hole in which screws screw. Holes should not be too deep enough to touch the waterproofing layer. In the case of too thin screed before installing a dowel, fill in a hole a bit of sealant. Be sure to put on the screw rubber gasket. It will be best to place a toilet bowl on the sealant pillow, and then press with screws.

What other options for installing the toilet bowl exist?

When installing the toilet, you can and do without such details as anchors, dowels and screws. Epoxy resin will come to your aid. The main thing is to prepare the foundation of the toilet and the surface of the floor for all the rules. This option is optimal if the tank is mounted on the wall, since it is precisely half of the weight of the full design.

For a start, walking with sandpaper or abrasive stone on the floor surface so that the epoxy resin subsequently grabbed well and kept.
Apply glue to the floor and the base of the toilet bowl with a uniform layer of several millimeters. Install the design, align it and wait for the complete drying of the resin.

Recently, false toilets are becoming popular. They are installed on the wall, without any contact with the floor. To install, you will need to make a metal frame and attach it to the bearing wall, and it is already directly to fix the toilet to the toilet, if you plan to hide the pipes and a tank behind the plasterboard wall.

You can also mount the suspension toilet with a tank of an open type directly to the wall, but in this case you will need to transfer the sewer tube into the thickness of the wall. Configuration of the structure is carried out by using an anchors mounted in a frame or wall.

Video on the installation of toilet bowls do it yourself

After reading the process of independent installation of the toilet, you can easily determine how many tools you managed to save, not attracting plumbing or private wizard to this. We are always happy to help you in any endeavor. In the comments, you can leave your questions, comments and examples from your own experience. Coach your home!

Installing the toilet - a responsible process that is better to leave professionals. However, this is not always possible, so they will not be superfluous on how to install this important thing in the toilet room yourself. At first glance, the procedure is optimally simple. It is only necessary to connect the toilet to the pipes with water, sewage and securely secure. And how the whole procedure actually looks, will be discussed below.

Features of the process

In fact, the correct installation of the toilet, of course, is complex. However, if you understand its technology, you can safely install the toilet and save on plumbing services. It will increase in their own eyes. Recently, the number of model toilet models has increased significantly, if desired, you can find the one that will not seem difficult in the installation.

Together with them, in addition to the traditional method of installation, other attachment methods appeared.For example, the method has now become extremely popular when the tank is hiding in the wall. Wrapped and wall toilets, which are fixed directly on the wall, completely freeing the floor. Such models look very interesting, they are not harder to fix them than models with floor fasteners.

Also, the installation of the toilet is affected by the type of fastening, washing, the supply of the sewer pipe, its dimensions. Special attention is paid to the flatness of the surface on which it is planned to install a plumbing. That is why it is better to consider the model of the toilet and the type of room in advance, in which it will have to be mounted independently. This is especially true for toilet and bathrooms in new buildings. It is worth considering the size of the room so that the installation goes easily and correctly.

When installing toilet bowls in apartments or houses, where you already have a toilet, you should still think about the dismantling of the old product, as well as repairs. Another point that is worth considering in advance - the presence of all the necessary tools, including the perforator, screwdriver, dowel. By purchasing a new toilet, it should be carefully inspecting the bowl and the tank before it. The product should not be chips and cracks. They can cause a leakage of a new product.

Special attention should be paid to internal cavities, as well as the release of the toilet. It will not be superfluous, which consists of a complete set. For example, when buying in the store, you should ask the seller if there is a seat, fastening to the floor or wall. If there is no something, it is better to buy all the missing items. This will make installation without any problems.

Types of designs

Types of toilet bowls are now a huge set, as the parameters for which they are separated. Often it becomes the cause of the buyer's confusion. Of all this variety you need to select one toilet. At the same time, it is desirable that he perfectly approached the toilet room.

Thermal toilet is divided into:

universal, the most dissemination of the model;
baby, who are very convenient for children with their small size;
for people with disabilities, differ in various designs.

The type of installation of the toilet is two species.

Outdoor, the fixation of which is carried out to the floor. This type is divided into corner and wall.
Suspended. Such models are attached to the wall using special attachments (installations). They are called wall or built-in.

An important point is the compatibility of the wallile toilet with installation. Installation dimensions should be selected based on its location. In addition, installation allows you to install not only the toilet, but also the bidet.

Installations are:

blocks, which are mounted only on the carrier wall;
frames that can be mounted anywhere.

At the attachment of the toilet to sewage also allocate several separate species.

With horizontal release

Such toileties are connected to sewage exclusively at an angle of 95 degrees. These models are especially convenient when the sewer pipe passes in the wall. However, with the help of a corrugated pipe, the toilet can be equally easily attached to the floor. This species initially got its distribution in Europe, and not so long ago and with us.

With vertical

These designs are the most common, the most conventional toilets are hidden behind this title, which are connected to the sewer farm in the floor. Most often there are such models in Stalinki, built in the middle of the twentieth century.

With oblique

Such toilets will be connected to the sewer pipe at an angle of 45 degrees. These designs can be seen in all houses that were built at the end of the last century.

Drain of water in the toilet is one of the main moments.

By how the drain tank is installed, the structure of the toilet bowl is divided into three types.

Hinged, which is mounted on the wall.
Tank installed on the toilet. This model can be called traditional and immediately recognizable. It is easy to install on top.
The hidden tank is embedded in the wall, thereby freeing the room and making it even more attractive.

By the location of the drain hole, plumbing products are divided into two types.

With rear drain

In such models, water from the tank flows along the back wall of the bowl. The advantages of such a drain are that the flow of water is stronger, which means it is better cleans the bowl. It is worth considering that the rear wall will always be dirtier, and on the front there will be more splashes. There is a bowl of such toilet bowls solely using household chemicals.

Circular

To the bowl of toilet bowl, water comes in several holes, so the entire surface is washed more evenly. Of course, in these models, the rear wall cleansing is worse, but in general, splashes less.

The water supply to the tank is in different ways and also affects the installation of the toilet. It happens the bottom, side and rear.

By how the water mirror is located, three species can be distinguished.

Flukeless, when the water mirror is exactly in the middle of the bowl. In this model there are 1 essential flaw in the form of water splash during its use.
With shelf, it is distinguished by the presence of a visor in front of a water mirror. This design leads to the spread of unpleasant odors.
With the bias of the posterior wall, the water mirror is put forward to the fore, which minimizes the amount of splashes and unpleasant odors. Experts recommend to stop their choice on this model.

On the plum in the upper tanks, the toilet can be divided into three main types.

Bell

The bell is a cast iron tank, which is attached to the toilet with the steel pipe. Inside it is arranged from the lever, chains, bells (cast-iron tubes with a gasket from below). Lifting, the bell passes water into the drain pipe. As soon as the chain is released, the plug is lowered. Of the disadvantages of this model, you can note the need to replace the gasket once a few years. Another unpleasant moment is the accumulation of rust and deposits, which worsen the drain.

Corrugation

The corrugation works when they pull over the rope, fixed on the lever. Corrugation leans, water is sucked. While the rope is released, the root of the corrugations is tilted until the entire flow of all the water in the tank. From problems with this design, it is worth noting the flow at the base of corrugations, which is formed in a few years of use.

Pear

Pear is characteristic of all modern drain systems. The principle of operation of the structure is based on the fact that the lever or the button is pressed, the rod rises up, the pear leaves the saddle, water flows. Despite the variety of forms of saddle and pears, the shortcomings of this design are common. The most basic problem is to reduce rubber elasticity, which leads to leaks. Another disadvantage is associated with pollution of the saddle by sediments, which also causes to flow.

Toilet bowls can be classified by seat material (Plastic), case material (San Fayans, San Porcelain, Metal, Natural Stone), Design and even color. Some models are equipped with microlift. This is one of the convenient features.

Choosing a place

Planning the toilet room should begin with a selection of toilet bowl. It is necessary to take into account all its features. Only after that it is worth starting further actions. Of course, if there is an old toilet, it needs to be dismantled. Most likely, you will have to carry out overhaul in the room. And it includes an upgrade of the sewer of sewer communications, the tie of the floor, cladding.

Before installing, you need to estimate the size of the new plumbing device.This will make it possible to understand how it is better to place it: in the center of the room or closer to the wall. It can better mount it on the wall or move close to the bathroom. It is necessary to determine the height on which it is better to install the toilet. Today, modern models are capable of satisfying any whim.

An unpleasant task can be the unconventional location of the sewer tube. Therefore, it is necessary to provide the best options in advance. Perhaps it is worth the pipe itself to deploy or extend, and maybe it will be better to choose a non-standard plumbing model. Of course, ideally, if the toilet can be connected vertically at an angle of 90 degrees. It is worth remembering that it is better if the intermediate parts between the toilet and the sewage will be as small as possible.

You can draw a scheme for the location of the toilet and other items in the toilet. So it becomes more clear whether the angular placement of the structure is needed or you can do the generally accepted standard. In modern new buildings, everything is simple. After all, the installation of the toilet from scratch occurs here, all communications are summed up with a variety of models. In older khrushchev, it is clearly all more complicated.

Dismantling of old

When the new toilet is already selected, the location is known as its main characteristics, it is necessary to move to the next step in the form of dismantling the old toilet. Most often have to clean outdoor toilet bowls that are fastened to the floor. With such a task, you can easily and quickly cope with yourself. No need to contact the master.

Start standing with water and draining it from the tank into the bowl of the toilet bowl. Then you need to unscrew the hose that comes from drainage to the tank. Next spin the tank fasteners. If they are not amenable, it is worth using special means. They are applied on fasteners (about 6 minutes), completely dissolved during this time lime or rust.

Of course, you can do without such funds. For example, with the help of an adjustable key or screwdriver thoring fastening bolts easier. If the old toilet is planned to be thrown out, the problem of a bad disconnection of the tank can be solved using a hammer. After the attachments of the tank are unscrewed, you should go to the fasteners of the toilet. Often they have the kind of nut shrewd on anchor. To facilitate the revealing process, you can use the methods described above.

When all the fasteners are unscrewed, it is necessary to disconnect the blocking of the toilet to the sewage.In old toilets, as a rule, the place where the drain is attached to the sewer pipe, was coated with cement. If so, you will have to remove the cement with a screwdriver and hammer. Moreover, you need to start with the coating going across the seam.

Next should be siled, but leave it at the same place. The toilet must be moved in different directions to finally drag the water remaining in the knee. It is necessary to disconnect the neck from the sewer pipe. This is not always possible: sometimes the toilet can be glued cement mortar to the floor. In this case, with the help of a chisel and a hammer, the pedestal chips parts.

Now the toilet should be easily detached, it can be attributed to the garbage. If you wish, you can split a sledgehammer to make it easier to endure. Another important point - you need to shut the sewage hole with a plastic or wooden plug. This will allow working without unpleasant odors.

After the old toilet is dismantled, you should evaluate, in what condition the pipes are. For example, before installing a new design, experts recommend replacing the cast-iron pipe with a new plastic. Modern pipes are able to make it easier to facilitate the installation of the toilet. It is possible that the uneven pipe is better replaced by a direct analogue in order to make it easier to mount the toilet to the sewer plum.

How to Install: Step-by-Step Guide

Install the toilet is not completely difficult to install if you follow a small step by step management. Moreover, for the installation of the toilet to the floor and the wall, the most important thing is the smooth and prepared surface under fastening. To install it costs to prepare a number of tools in advance.

The main list includes:

perforator;
adjustable key;
spanners;

a hammer;
sealant;
screwdrivers;
roulette;
flexible hose.

The toilet tank is supplied complete in a fully assembled form or disassembled.In the second case, it will be necessary to assemble it. Start mounting is best with the decomposition of all the details to make sure of availability. Following the instructions from the toilet manufacturer, you need to assemble the insides of the tank. Actions may differ depending on the type of drain system. It is necessary to double the reliability of the fastening of parts, but without excessive effort, especially when tightening screws and bolts.

On the floor

Floor toilets are somewhat easier than wall. Yes, and as long as they remain still more popular. Determine the coating and flatness of the floor in the toilet room. Installing the toilet to the floor is different, based on the floor coating. For example, on the tile floor there is no need for additional alignment.

If a tile is laid on the base, but it is not quite even, it is better to carry out the installation by means of chops and screws. If the toilet is installed in a new building, where there is no finish, it is better to fill the screed, and then lay a tile. If the wooden stand was located under the old toilet, it should be dismantled. The resulting empty space should be pouring cement (it is desirable that quickly freezes). In the event that the gender fails completely, you can enhance tightness when installing with a sealant.

Recall the sewer tube from garbage and sediments, the tap is installed on the plumbing (if there is no) to overlap water to the tank. Connect the blocking of the toilet with the sewer pipe. This can be done in one of several ways.

The place of connecting bowls with sewage is better sealing with silicone sealant. This will protect against water to the toilet when washing the floor. If the bowl of the toilet is connected to the cast-iron pipe, it is best to use a transition cuff with a diameter of 110 mm. The sealant is applied to it abundantly, then it is inserted into the cast-iron pipe. It is worth emphasizing that before that it will definitely be cleaned the pipe from pollution.

You can do this with a corrugated cuff. The main advantage of this method is economy. However, the toilet cannot be attached to the conclusion. This method is better not to choose for small rooms. With the help of a straight cuff, you can provide a durable and sealer joint of the sewage bowl. With the help of an eccentric cuff, you can if the toilet and sewage connection centers are displaced. Follow the predetermined toilet method in advance.

On dowel

Once again trying the product. Special attention should be paid to the angle of inclination, as well as how the height of the sewage coincides with the neck. When detecting inconsistencies, they should be eliminated. A pencil or marker will drive the landing place.

Make marking. To do this, determine the central axis of the toilet. Best of all, if it coincides with the center of the room. With a landmark on the axis, it is necessary to install a bowl at a distance of about 15 cm from the sewer termination. Make labels for holes with a marker, which is strictly vertically inserted into the holes under the fasteners.

Prepare the mounting holes.To do this, you need to remove the toilet to the side, make holes on the labels. Then it is necessary to clean the holes from the garbage and pour silicone into them, which is in this case the waterproofer. After that, you need to insert a dowel.

Install the bowl. A special rubber gasket or a layer of silicone is placed on the outstanding place. Then they put the toilet in place and pressed to the floor. Insert sleeves insert in the holes for fasteners, the screws twist without extra effort, fixing all the plugs. Excess silicone is cleaned with a rubber spatula or a damp cloth.

On adhesive composition

Silicone glue, liquid sealant, epoxy resin can be used. This method is suitable only exclusively for smooth floors. Conduct marking. To do this, the bowl is installed on the required place and rub the contour pencil.

Conduct the preparation of the base.It is necessary to start with the cleaning of the floor and the base of the bowl from various contaminants. So that the adhesion with glue was the best, it is necessary to make the surface rough. For this, it is cleaned with sandpaper. It is also necessary to degrease the base of the toilet bowl and the floor with acetone or solvent.

Prepare adhesive composition to work, according to the manufacturer's instructions. Apply glue to the bottom of the toilet and the inner side of the contour on the floor. It should be applied not too much layer. Install the bowl in place. Be sure to press it strongly to the floor.

Waiting for complete drying of glue.Usually it is necessary for this at least 12 hours. Throughout this time, the toilet is better not to touch and not sit down. This will avoid location displacements. Fastening will be more durable.

On Taffeta

Taffeta is a gasket, which is made from durable wood. Plumbing construction is fixed on it. This method is ideal when installing the toilet on the wooden floor. However, it can be used for a floor with another coating. In addition to wood for taffeta, it is sometimes used by a rubber substrate with a thickness of 5 - 15 mm. For example, you can use an old rubber rug.

Taffetta prepare. To do this, take the board, the thickness of which is 2.8 - 3.2 cm, cut out from it the workpiece. Next, it is treated with oil or a solution that can prevent rotting. Anchor is fixed for reliable attachment to the workpiece. You can also drive nails in a chess order so that they stick out of it by 2 - 3 cm.

Make a recess in the floor to install the toilet.The size and configuration of the excavation must fully comply with the dimensions and the form of the taffeta. Pullen releasing cement. Taffette takes and turn it with an anchors or nails down. Then lower it in the cement on the floor. If everything is done correctly, the board will be on the same level with the floor.

Waiting for the cement will completely freeze. Install the toilet. To do this, put a bowl on your taffette and fixed by screws that are pre-lubricated with trove or graphite. Under the heads of the screws, it is necessary to lay the washers-gaskets from rubber so that ceramics remain without damage.

After the toilet is fixed, follow the simple instructions.

Install the tank right on the bowl of the toilet bowl and make a fastening using the plastic screws that are included. It is important not to forget between the tank and the toilet to establish an annular gasket.

Connect flexible eyeliner. It is desirable for this to choose a long hose. Special attention should be paid to the diameter of the inlets so that the mount is durable. When tightening the capes, it is not necessary to use excessive force.
Install the cover with the seat and the descent button. Recommendations for their installation go to the instructions. The technology of work is extremely simple and understandable to everyone.
Make a trial launch of water. If somewhere there is a leakage, you should pull the connections.
Customize the locking mechanism according to the instructions.

On the wall

You can install the toilet to the wall in a private house and an apartment. Connecting modern models to sewage is completely simple.

It is worth noting that such structures can be used even with a vertical sewage output.

Collect the mandate of installation itself, according to the instructions.
Install the upper stops that externally resemble the rods. Their adjustment is made using a screwdriver and an end key.
Install the lower stops similar to the plates. Regulate them with the face key.

Adjust the height for which the collected frame is moved to the wall. The center of the frame must be exposed exactly above the middle of the sewer pipe.
They are carried out using a bubble level installation installation in height. There is a label on the frame, which should be omitted or lift to the necessary height. Most often it is 1 m.
Adjust the height of the stops, and also set the distance from the wall indicated in the documents.
Fix the reinforcement frame to the wall. To do this, in the necessary places, the pencil or marker mark marks. After that, you need to drill holes and install the housings of the dowels in them. Then the fastener itself is installed, pre-put it on the sealant.

Install nozzles as well as connecting couplings in fixed installation. They are attached to their places.
Install metal rods. They will be attached to the bowl of the toilet. They are screwed into special nests, then the silicone seals are put on top.
Slide the sewage pipe to the required distance and fix the bracket. It must be inserted into the groove until it clicks.
Connect the plumbing to the tank. To do this, open the cover of the tank and take out the cap on the side surface. A corrugated pipe is introduced into the resulting hole. It is connected to the insoles of the invoice. It is necessary to delay it extremely neatly, since most often the nut is made of plastic.

Installing inside the tank, the tee, to which the pipe with the use of American and the adapter is fed. Also, a flexible hose from the tank is connected to the teach. It is attached with a cape nut.
Close the installation for the toilet bowl of the false wall, for example, from a gypsum walker, resistant to moisture. As a rule, drywall is attached to the frame and profiles.
Remove the wall and hang a bowl of toilet bowl. Install the decorative panel for the drain device.
Toilet bowls on pins, the release of the bowl is hermetically entering the sewer's sewer.

Before installing and before purchasing a toilet, it is worth familiar with the recommendations of experienced plumbers.

Following some rules, you can avoid many problems.

The first thing experts advise to pay attention is the type of drain. This is especially important if the supply of sewage will not change. With the help of adapters, it is especially difficult to carry out a high-quality unit of toilet with an inappropriate type of sewage removal.
Do not postpone the purchase of plumbing at the last moment, as well as purchase it after repair. It is better if the place in the toilet will be prepared under a certain model of the toilet in advance. It will simplify the installation of plumbing.

It should be abandoned from savings on bolts and anchors. It is better to choose nickel plated mounts. They are not covered with rust. It will save the product from ugly flows further, as well as bolts.
The eccentric cuff called the corrugation will help compensate the difference in the height of the floor before and after repair. To supply water to the tank, it is better to use the flexible hose.
In the case when the sewer pipe goes through the floor, it is worth using a rectangular knee or a flexible corrugated cuff.

The ideal option when installing, when the blocking of the toilet will be connected to the sewage without any cuff and other additional elements. For seal, you can use a ring with rubberized border.

With an uneven floor in the toilet room, the installation of the toilet is to produce with the help of silicone sealant.

Plumbers are recommended for use small wedges of wood or plastic. However, it is also necessary to use the sealant to the uniform distribution of the weight of the toilet. When installing the toilet on the old cast iron it is better to use the sealant.

If the water liner is old, it is necessary to replace it.When choosing a liner you need to know the distance from the places of compounds on the pipe with water before fastening with a tank toilet bowl. Then you need to replace the old flexible eyeliner. And it should also add 15 to 20 cm. The adapters for the threads in the connecting places either the FUM ribbon should be purchased in advance.

When installing the toilet on the tile to avoid cracks, the surface must be labeled.

To do this make marks in the right places. Self-tapping screw and beat with a hammer several times. After that, you can drill the tile with a perforator or drill, but only without impact mode.

If the sewage risker is made of cast iron, it must be cleaned up to the metal, then wash it thoroughly and dried. After that, a sealant is applied to the dry and clean metal surface. And down to impose it a little more. After that, it must be connected to the corrugation.

You can use the sealant to apply the outer part of the connection.

To remove the corrugation easily and without damage, connecting the toilet and sewer, its output and the release of the toilet bowl is lubricated with wet soap. And only after this procedure is put on a sewer.
Before making marker marker through holes in the sole of the bowl, you need to sit on it and check how comfortable. If necessary, you need to immediately correct the position.
It is not necessary to use plastic dowels going in a complex with toilet bowls. They quickly break, so it is better to give preference to other fasteners.

An additional insert in the old sewer cast-iron pipe can be removed using a perforator or burn. In no case cannot be used hammer. It is possible to burn out if the cavity was filled with gray or clogged with a cabine. Before burning, it is necessary to take care of sufficient ventilation of the room, remove all flammable means and materials.

Too durable inserts are best cut with a grinder or electric welding.

Also on the topic

Why dream pregnancy in a dream?

"Golden Rule" of accumulation of consequences of growth of the savings rate Gold rule of accumulation

Diagnostic examination on the scale of mental development A

What dreams of pregnancy is: the main interpretation of the "interesting" dream

Modern pregnancy planning: where to start a young couple?