The risers of water and sewer pipes are usually located in the niche of the toilet or bathroom.
And they usually try to cover up all this “economy” by any means: from curtains to a quarter-brick wall.
The curtain is somehow not aesthetically pleasing! A permanent wall will simply block access to communications.
Yes, of course, you can install a hatch door in necessary places. But if one of the pipes leaks, the plumber who comes will not turn into a “mouse” to get into the “walled” space and fix the breakdown.
Even several hatches may not solve a possible problem. The specialist will simply ask you to dismantle the obstacle... And you recently made renovations in the bathroom!..
Another option is a wide door that covers the entire wall or niche. But its height is limited by the height of the cistern - it will not open lower. When open, it will take up a lot of space, and if performed poorly, it is also at risk of “senile” distortion under the influence of its own weight.
Excellent alternative option A decorative and functional partition can be roller shutters for the bathroom. They can be installed, covering the entire niche opening in width and height. It is advisable to order roller shutters for the toilet that cover the entire back wall.
In this case, you will get full access to the entire volume of the niche, and there is enough space there (especially in new houses) even to arrange a mini-storage room for household needs. And in closed you will get a neat decorative panel.
At the same time, all communications will remain accessible when the roller shutters are open. And when closed, such a “curtain” will fit perfectly into the interior of a toilet or bathroom.
Everyone is familiar with ordinary “window” or “door” roller shutters - they can be seen on almost all windows and doors of shops, offices, and cafes located on the ground floor. Their use in plumbing “themes” causes certain inconveniences, in particular due to the limited space for installation.
The installation of plumbing roller shutters is quite simple. When lifted, the movable web is wound onto a shaft located in the upper box.
This process is facilitated by a special spring mechanism (SPM), which “helps” to easily raise and lower the roller shutters.
Correct adjustment of the mechanism ensures that the blade is fixed in any position without additional fixation. But this is only in case correct settings PIM.
Design restrictions! With a small opening width (up to 520 mm), the spring mechanism will not fit in a shaft of such length. Therefore, in such cases, an alternative method of winding up and lowering the roller shutter is used - a cord mechanism.
Plumbing roller shutters in a toilet are usually installed from an aluminum profile that is resistant to corrosion. Factory painting of the profile has increased wear resistance, and the polyurethane foam filling of the profile provides noise and even heat insulation.
Such roller shutters are easy to wash, and in the price range they are the cheapest options. These roller shutters are good.
The color range is quite wide. In addition to a dozen basic colors, it is possible to additionally paint the lamellas in one of 180 additional shades from the RAL scale. However, such additional painting will not always be as durable as the factory base paint.
In the case of “panel” finishing of your bathroom, when the walls are tiled in two colors, a combination of lamellas of several shades is possible. The guide rails also come in several shades, allowing them to be optimally combined with the flexible roller shutter leaf.
Roller shutters for the toilet with a pattern look special. Exclusive design can be given decorative panel using airbrushing or gluing a film with a pattern.
Installation of roller shutters in the toilet
Roller shutters in the bathroom are installed in several ways, which are determined by the design of the opening:
- installation in the opening:
- inside the box;
- outside the box.
- Installation “in the slip” - the box is located outside.
The first installation method is preferable, since it allows you to hide the entire box in a niche, leaving only its back wall visible from the front.
And if the tiles on the walls have not yet been laid, then with this installation method you can attach the guides directly to the wall and they will carefully “sink” to the thickness of the tile installation.
The lamellas of the roller shutter canvas in this installation option will be turned towards us with the convex side.
Roller shutters have to be installed with the box facing outwards in case of limited space in the niche. In this case, width measurements are made already on top of the laid tiles.
In this case, the lamellas of the canvas will “turn” towards us with the concave side.
One more functional feature installation “in the opening” is to reduce the useful width of the roller shutter by the total width of the guides (two of 53 mm each), and the useful height by the size of the box.
Range of box sizes: 137 – 150 – 165 – 180 – 205 mm. The selected size is determined by the length of the rolled-up fabric, that is, the height of the roller shutter.
The option of installing roller shutters “in the trim” is mainly used when the wall thickness is small. With this option, the box is “forced” to be located outside, without reducing the useful height of the opening, and the frame is complemented by a lower guide.
Additional functional ways installation:
- If your bathroom is used dropped ceilings, then the box can generally be “hidden” above the ceiling plane. In other cases, the box will be located under the ceiling.
- A 20-25 cm distance between the box and the ceiling will allow you to use the box as an additional shelf.
- If there is no need to constantly open the “behind the toilet” part of the niche, the roller shutter canvas can be divided into two parts: the lower one will be permanently in place and raised manually only if necessary, and the upper one will in the usual way roll up into a box.
- In rare cases, it is possible to install the box even at the bottom of the roller shutter, but in this case it will be necessary to provide a locking mechanism at the top of the leaf.
How to install roller shutters?
Roller shutters in the bathroom are installed either as an overhead installation or as a built-in installation option.
Preparing the opening for installation
The frame of the assembled roller shutter is a clearly rectangular structure and, accordingly, an opening of the same shape is required, which is very rare, especially in old houses.
In general, the width of a niche is measured in three planes: top, middle and bottom.
And the width of the roller shutter is taken minimum value. For accurate installation, the discrepancy between these dimensions should be no more than 5 mm - such gaps can be easily decorated.
In the installation plane of the roller shutter frame on the walls, the presence of any volumetric decorative parts is “contraindicated” (for example, stucco molding) - they will not allow the roller shutter guides to be tightly secured.
The procedure for directly installing a roller shutter on site is as follows:
- We check the completeness of the structure, which should include:
- roller shutter fabric;
- protective box with winding mechanism;
- guide rails (2 pcs.)
- accessory set.
- We prepare guide rails for installation on walls;
- for surface-mounted installation, drill Ø8 mm holes through 2 walls of the front surface and the busbar.
- with a built-in installation option, drill Ø8 mm holes through 2 internal walls
Hole locations:
- extreme ones - no closer than 10-15 cm from the edge of the tire;
- medium - evenly in increments of 45-50 cm.
- Using a Ø11.8 mm drill, we drill holes on the front wall (overhead installation option) or on the inner wall (for built-in installation of roller shutters). These are holes for self-tapping screw heads and subsequent installation of plugs (front ones) in them.
- We drill holes Ø4.2 mm on the flanges of the protective box together with the lid - these are “sockets” for future rivets.
- Having taken the cover from the box, we drill Ø8 mm holes in the back wall box (surface mounting) and the side walls of the box (built-in). A combined fastening option is possible and desirable.
- With the overhead installation option, it is necessary to cut out pieces of flanging on the rear surface of the box in the places where the guides fit.
- We assemble the box and two guide rails together, after inserting plastic guide devices into them.
If your roller shutters require a lower frame at the bottom, you should cut grooves at the bottom of the guides for locking mechanism(though why is it needed in the toilet).
- The assembled frame is installed symmetrically with respect to the opening at the installation site, set strictly according to the level: the vertical is the tires, and the horizontal is the box.
- Through the finished holes in the box and tires, Ø8 mm holes are drilled for dowels, followed by alternately fixing the element (box or tire) with a dowel. The process must be constantly monitored using a building level.
Note! If the roller shutter frame is mounted on a metal surface, all Ø8 mm holes described above are drilled with a smaller drill diameter corresponding to the diameter of the metal screws.
- We install the roller shutter panel into the grooves of the tires (guides). The canvas should be wound over the shaft from top to bottom from the rear surface of the box.
To avoid accidental damage to the canvas coating on the shaft of the structure, the latter must be temporarily wrapped with soft material.
- Since such structures predominantly use a spring-inertia mechanism (PIM), we will consider the sequence of just such an installation:
- Install traction springs;
Repairs often turn into a real undertaking that can drag on for quite some time. long time. One of the important locations is the bathroom. This is where the need most often arises to hide all communications from the eyes of strangers. However, you must maintain access to them. In such situations, roller shutters will come to the rescue.
Benefits of using roller shutters in the toilet
Roller shutters for bathroom windows, like similar devices for communications, have whole line benefits.Among the many, we can highlight the following:
- easy surface cleaning with the possibility of using additional chemicals.
strength and long service life of the structure;
excellent sound insulation, which will get rid of the annoying noise of water in pipes;
reduces heat loss from the walls, which will make the toilet much warmer;
ecologically clean materials able to withstand temperature changes;
Video: how to install roller shutters in a toilet yourself
When is it convenient to use plumbing roller shutters?
There are many options for using roller shutters in the bathroom. The following areas can be distinguished:
hiding communication pipes;
cover window openings;
protecting some parts of the room from outside view.
Much depends on how the product is installed. Just watch a video in which installing roller shutters in a toilet with your own hands will be described in as much detail as possible. This will allow you to complete all installation steps as accurately as possible.
Roller shutters are great for hiding all the unnecessary stuff. At the same time, choosing plastic provides many advantages. The following should be especially emphasized:
ease of care;
possibility to choose different color design;
lighter weight of the structure, which simplifies work;
sufficient to perform its function, has no unnecessary parts.
Moreover, such a design is easiest to fit into overall design rooms. The design of a toilet with roller shutters will become noticeably better, and to be convinced of this, just look at the example photos.
At the same time, the installation of such products is also useful in that it provides free access to all communications that are located behind them. Unlike “windows”, which many people like to leave in solid walls, roller shutters provide the maximum amount of space for inspection and necessary repair work. This becomes a big plus in favor of this particular option.
Types of roller shutters
Before installing it in the toilet, you need to decide on some details. First of all, the choice of material from which the entire structure will be made. The following options are currently available on the market:
steel;
aluminum;
armored;
wooden;
perforated;
plastic.
It is the latter that are most suitable as sanitary roller shutters. This is due to ease of maintenance, ease of installation and durability of use.
Installation steps
The entire installation process can be divided into several stages. Among them are the following:
box installation;
box alignment;
securing the box;
installation of the blade and stoppers.
Much depends on what stage of renovation the bathroom is at. If the renovation is just underway, you can install roller shutters, covering everything unnecessary with any material. If all the work is completed, then it is much easier to use overhead products. At the same time, it would not be amiss to ask which company of roller shutters in the toilet is better from specialists.
Plumbing roller shutters in the toilet fit well into the overall design of the room, which can be understood even from the photos presented above.
Installation methods
There are several ways to install sanitary shutters. They can be divided into built-in and overhead. Each type has its own characteristics, but the main emphasis in this case is on the moment of installation. 
The first ones are best used at the time of the main stage of work. The second is if all the work has been completed, and only after that the idea of installing roller shutters came up.
Roller shutters are one of the types of blinds, which, in addition to being decorative, also perform a protective function. However, its main purpose in the toilet is to hide sewer pipes. Installation of such blinds by professionals is quite expensive, so in order to save your family budget, you can install roller shutters in the toilet with your own hands.
Why do you need roller shutters in the toilet?
The peculiarity of the toilet room is its rather small volume. That is why the problem arises of how to hide many pipes that spoil appearance. The main task of the ceiling is to provide free access to plumbing communications so that we can get there at any time without difficulty. You can use an option with opening doors, but this will take up additional space.
Sometimes plastic with a specially made hole is used for these purposes to gain access to communications. However, the inconvenience is that when repairing or replacing a pipe, you will need to completely disassemble the entire structure and then reinstall it.
Plumbing roller shutters
That's why manufacturers came up with new option to hide the pipes - roller shutters in the bathroom. They open from top to bottom, so they do not take up space, and neither the toilet nor other plumbing installed in the room will interfere with their opening.
The only part of the roller shutters that takes up space is the container, which houses the entire canvas. However, it is located at the top, so it does not bother anyone. In addition, this container can be hidden under a suspended ceiling.
Types of roller shutters, their advantages and disadvantages
Roller shutters can be easily used on the windows of apartments, garages, doorways kiosks, and so on. IN Everyday life You can see this type of blinds almost everywhere.
Aluminum, wooden, plastic, armored and perforated blinds are available for sale. Most suitable option are plastic roller shutters for the bathroom, as they are light, functional, and have a wide variety of colors and shades. That is, you can easily choose them to suit any interior of the room.
Based on installation methods, roller shutters are divided into:
- Invoices;
- Built-in.
Convenient roller shutters behind the toilet
In addition to this sign, this type blinds are also divided depending on the type of control:
- Remote – an ordinary remote control is used;
- Manual;
- Mixed.
What are such structures? This is an ordinary box that has guides. During opening or closing, the canvas is wound on a shaft, inside of which there is a special spring that controls the weight of the canvas. Sometimes roller shutters are equipped with additional handles or locks for ease of use.
When choosing such structures, consider the place where you plan to install them. If roller shutters are intended for a bathroom in an ordinary apartment, then you do not need to overpay for additional locks. It is enough to choose a quality one aluminum profile, which have a valve. In addition, it is unlikely that at home you will use blinds with a remote control remote control, and this pleasure is not very cheap.
Of course, if you plan to install roller shutters in some public place, then choose a steel profile. In addition, for such places it is necessary to have a reliable lock so that strangers cannot do anything.
The installation of blinds depends on the stage of your toilet renovation. If you are still just getting started preparatory work, then it is better to purchase built-in plumbing roller shutters. To do this, mount a metal box under the level, and then hide it with absolutely any material that you like best and that suits the interior of your bathroom. Most often, plastic or tiles are used as such materials.
Otherwise, that is, when you have already completed all the major repairs in the toilet, then use overhead roller shutters. There will be nothing terrible if the box peeks out; it has a fairly attractive appearance and will not be conspicuous.
The main advantages of this design include:
Plumbing roller shutters, like any other device, also have certain disadvantages:
- Plastic is quite electrostatic, so it tends to accumulate dust;
- Any mechanical damage is undesirable, since the material is quite fragile.
Another one important feature such designs - the possibility of applying absolutely any design to them. In this way you can create original design toilet premises. For convenience and even greater functionality, if possible, you can additionally install various shelves to store all the necessary things.
Methods for installing roller shutters
Installing roller shutters in a toilet is a fairly easy process and does not require any additional skills. There are several installation methods:
- Installation in the opening with the box inside;
- Installation in the opening with the box facing outwards;
- On the overlay, with the box facing out.
Installing a roller shutter in a toilet
The method is selected based on the design features of the opening itself. The first installation method is the most optimal, the main thing is that all communications that we are trying to hide allow deepening. Produce everything first necessary measurements. This must be done after leveling the walls and before laying the tiles.
In the event that availability large quantity communications does not allow the installation method described above to be applied, then they use the installation of roller shutters with the box facing outwards into the opening. With this method, all necessary measurements, as well as installation, should be done after the walls have tiles. The disadvantage of this method is that the doorway is slightly reduced.
Overlay installation is used in cases where roller shutters need to be installed sufficiently thin wall, for example, on a plasterboard structure.
Installation sequence
You should start installing roller shutters in the toilet with your own hands by installing the box. When you buy blinds, check that the kit includes special tires that will hold them in place. If the walls in your apartment are concrete, then first use a hammer drill to make holes and attach the tires to the wall using anchors. Next, a box should be installed on these tires.
At all stages of installation, use building level to ensure that the structure hangs level. All elements of roller shutters are attached using dowels.
After you have already installed the box and its guides, attach the blade to the shaft. Don't forget to attach stoppers, which are designed to hold the canvas in its extreme positions. Next, connect the elements to control the blinds.
After all stages, be sure to check the functionality of the structure. Lower and raise the roller shutters several times, while making sure that the canvas lies flat without any obstacles. In addition, there should not be any unnecessary noise.
The final step is to put the lid on the box and remove protective film from the design.
IN modern world Roller shutters are the only device that can easily hide all communications and provide free access to them if necessary. In addition, they fit harmoniously into any interior of the room and provide additional sound insulation.
The Levin-Group company offers the lowest cost on the market for installation of plumbing roller shutters - 2,700 rubles. behind standard installation.
Prices shown do not include discounts from the manager. Please check the cost with managers.
| Width | Height | Control type | Price with pickup and self-measurement (RUB) | Price with delivery and installation (RUB) |
|---|---|---|---|---|
| 600 | 1 000 | Spring | RUB 3,406 | RUB 6,708 |
| 700 | 1 100 | Spring | RUB 3,931 | RUB 7,325 |
| 800 | 1 200 | Spring | RUB 4,455 | RUB 7,941 |
| 900 | 1 300 | Spring | RUB 5,069 | RUB 8,663 |
DIY installation
For those who decide to save money and install roller shutters in the toilet on their own, it is advisable to weigh everything. Savings on installation amount to 2,700 rubles. But you can lose money on the purchase of a new product and the product warranty due to improper installation.
Often, apartment renovation specialists offer their services. It is important to understand that they do not work for free and include the cost of additional work in hidden fees. But they are not specialists in installing roller shutters, and therefore minor savings often result in loss of money and warranty!
We provide discounts of up to 15% on goods with pick-up.
Video of installation of sanitary roller shutters
The cost of installing sanitary roller shutters, including delivery and a guarantee for the work, is 2,700 rubles. Considering the uniqueness of each repair, additional work is possible upon agreement at the time of signing the contract. If necessary additional materials installation prices are negotiated individually. Prices for installing roller shutters in a toilet depend on the volume additional work. This may be a standard installation, or there may be additional work related to the preparation of the opening. The exact scope and cost of work are indicated in terms of reference upon conclusion of the contract.
This article will discuss Roller shutters in the bathroom, their features and characteristics, as well as the main methods of installing them.
Many people do not know what bathroom shutters are and what they are intended for. Everyone is accustomed to roller shutters installed on the windows, but windows in the toilet or bathroom are very rare, even in new-plan apartments.
Meanwhile, roller shutters placed in the bathroom perform another function - they hide wall niches, openings and various plumbing communications, which are present in large quantities in every bathroom.
In any apartment, a lot of different communications are concentrated in the bathroom and toilet, from filters to water meters, so in these rooms roller shutters are especially necessary and useful not from an aesthetic, but from a functional point of view.
Plumbing roller shutters are usually installed in the bathroom at the same time as the replacement of pipes and the installation of meters, filters and water heaters. At this time, it is best to install roller shutters, since installing them separately will require separate repairs, which will significantly increase financial costs.
If the roller shutters are installed in a timely manner, the bathroom will not require repeated repairs if it is necessary to provide access to any pipes.
Useful: high-quality roller shutters also provide fairly good sound insulation.
In addition, roller shutters are excellent option to hide various communications, combining perfectly with any. Roller shutters can be painted in any color, and at the customer’s request – in several colors, which is often done when there are panels in a bathroom or toilet.
Features of the design and installation of roller shutters in the bathroom
Initially, roller shutters were intended for installation in doorways and windows, and the installation of a roller shutter in a bathroom can be conditionally called “use not for its intended purpose.”
Roller shutters are a liftable fabric assembled from slats, which is wound at the top onto a shaft placed in a protective box. Inside this shaft there is a spring that balances the weight of the canvas, preventing the roller shutters from unwinding under the influence of their own weight in the absence of fixation.
Many manufacturers are unable to produce the correct mechanism, so they secure the roller shutters using an additional lock.
Important: if the opening width is less than 52 cm, it is impossible to use a spring mechanism in the roller shutter, so install blinds in the bathroom (roller shutters) with a cord mechanism.
Installation methods
There are three main ways to install roller shutters:
- In the opening with the box inward;
- In the opening with the box facing outwards;
- “On the overlay”, with the box facing out.
The installation method is chosen depending on the specific design of the opening.
Let's consider these methods in more detail.
Important: in this case, the tiles laid on the side walls must extend at least 5 cm into the depth of the opening so that the concave side of the lamellas remains visible.
In the case where the tiling of the walls has already been completed, the structure is slightly modified and installed on the tiles. Installing the structure in the opening reduces its useful width by twice the width of the guide (53 mm on both sides), and the useful height by the height of the box.
Moreover, in the case of a low opening, the box may take up an unacceptable volume. So, if the initial height of the opening is 500 mm, then after installation of the structure ( minimum size boxes - 137 mm, there are also boxes of sizes 150, 165, 180 and 205 mm), the useful volume will be only 363 mm (500-137).
The size of the box is selected depending on the height of the opening, while with a larger height of the structure, full opening of the opening will require more turns wound on the shaft.
Installing a roller shutter in a bathroom with your own hands allows it to look more modern in terms of design, while installing roller shutters requires a fairly limited workplace, and repair work does not require moving washing machine or other items to gain access to the facility.
