The work of an electrician on secondary circuits. Secondary Electrician

Description of works... Installation and sealing of fastening parts. Manufacturing of small fasteners and gaskets that do not require precise dimensions. Manual hammering of grounding electrodes. Coloring of wires and tires. Punching of sockets, holes and grooves according to the finished marking by hand. Unpacking the equipment and cleaning up the packaging material. Equipment cleaning and wiping. Installation and removal of the used scaffolds.

Must know: main brands of used wires; assortment of non-ferrous and ferrous metals; types of basic materials used in the manufacture and installation of electrical structures; the main types of fasteners of large structures; the main types of tools used during electrical work; electrical diagrams of mounted switchgear and secondary circuits.

§ 428. Electrician for switchgear and secondary circuits of the 3rd category

Description of works... Installation of dowels. Sealing of passages for all types of wiring and grounding busbars through walls and ceilings. Rolling out of wires with the installation of drums. Installation of grounding networks and zeroing devices. Equipment painting. Removal of closed or open distribution points (cabinets). Dismantling of simple devices and devices (support insulators, knife switches and switches with a lever drive, fuses, rheostats, current and voltage transformers, etc.). Hole punching with a power tool. Cleaning of welding places with mechanized tools. Manufacturing of flooring and scaffolding. Installation of busbar supports on insulator support columns. Acquisition of materials and equipment for performing electrical work in residential, cultural, domestic and administrative buildings.

Must know: the main types of fasteners and fittings; device used devices, electrical devices and electrified and pneumatic tools; electrical diagrams of mounted devices and circuits; device and methods of using simple rigging; the rules for the procurement of materials and equipment for performing electrical work in residential, cultural and amenity and office buildings.

§ 429. Electrician for switchgear and secondary circuits of the 4th category

Description of works... Connection, termination and connection of wires of all brands with a cross section up to 240 mm2 in various ways, except for welding. Installation of protective devices, covers and fences. Marking of laid pipes and branches. Fastening of structures and apparatus using a powder tool. Crimping of tips in an explosion chamber. Soldering lugs to wire conductors. Checking and regulation of electromagnetic current and voltage relays. Installation of brackets and metal support structures. Fastening of structures by gluing. Insulation resistance measurement. Laying of steel and plastic pipes in furrows, on floors, along walls, trusses and columns. Laying of perforated mounting profiles. Acquisition of materials and equipment for performing electrical work in industrial buildings and engineering structures. Reinforcement and installation of support insulators, fuses, additional resistances for voltages over 1 kV. Installation of low-impedance shunt resistors. Installation of insulating boards and protective frames. Installation and preparation for welding of parts of open and shielded bus ducts (compensators, casings, screens, contact plates, flanges, etc.). Manufacturing of oil pipelines. Winding a magnetizing winding on a baktransformer. Testing of insulators (except tests in an explosion chamber). Harvesting and bending of tires, slopes, hinges and jumpers. Installation of valves, taps, fittings, manometers and thermometers. Taking sample oil. Assembly of fittings and insulators into insulating hangers for switchgear substations. Filling the equipment with oil and draining the oil. Revision and installation of valves on pipelines during the installation of transformers. Continuity of wires.

Must know: main types of switchgear; methods of measuring insulation resistance; electrical diagrams of mounted switchgears; methods of connection, termination and attachment of wires of all brands with a cross-section up to 240 mm2; methods of marking steel and plastic pipes and bends; rules for slinging and moving the serviced equipment; device and methods of using mechanized rigging equipment; the device of a powder tool and the rules of its care; the device of explosion chambers for crimping tips; purpose of relay protection; methods of installation of switchgears; arrangement of equipment for drying and filling oil; the device of the main units and parts of transformers; the rules for completing materials and equipment for performing electrical work in industrial buildings and on engineering structures.

§ 430. Electrician for switchgear and secondary circuits of the 5th category

Description of works... Connection, termination and connection of wires of all brands with a cross-section of more than 240 mm2 in all ways, except for welding. Installation of disconnectors, separators, short-circuits, earthing switches, arresters and surge arresters with voltage up to 220 kV. Installation of load break switches, boxes with signaling devices and relays and interlocking locks. Installation of voltage and current transformers with voltage up to 220 kV. Installation of power transformers, autotransformers and reactors with a capacity of up to 63 thousand. kVA, voltage up to 220 kV and power up to 125 thousand kVA, voltage up to 110 kV. Testing insulators in an explosion chamber. Installation of SF6 cells with voltage up to 220 kV. Installation of block transportable devices (UTB). Installation of concrete reactors weighing up to 3 tons. Preparation and installation of main collecting and branching buses, flexible bends and expansion joints with a cross-section of up to 1000 mm2. Installation of ready-made packages and blocks of tires weighing up to 250 kg. Phasing devices. Carrying out measurements and drawing up sketches during the installation of equipment. Testing and installation of radiators. Installation of oil pumps. Installation of bus ducts made of double aluminum channels. Installation of support silumin rings on a structure. Assembly of blind corners of busbars during preliminary blanking of blocks. Laying of busbars with alignment along the axes and fastening with locks. Installation of high-frequency communication equipment, protection and telemechanics (except for connection filters and resonant suppressors). Installation of installations such as "Sukhovey" and "Hoarfrost". Installation of shielded conductors. Installation of oil switches. Installation of air switches with voltage up to 110 kV. Installation of rigid busbars for switchgears. Marking and laying of wires of all brands and cross-sections (except for hazardous areas).

Must know: electrical circuits of the equipment to be mounted; methods of installation, pre-installation inspection, drying and regulation of electrical equipment with voltage up to 220 kV; methods of connection, termination and connection of wires of all brands with a cross-section of more than 240 mm2; rules for marking the site of installation of support structures, equipment, routes for laying wires and buses; rules for making measurements and drawing up sketches of individual wiring units, structures, assemblies and blocks of electrical equipment for manufacturing at stands and in workshops; rules for assembling and fastening open and shielded bus ducts; the order of phasing of the completed wiring and methods of checking the executed circuits; insulating characteristics of transformers.

§ 431. Electrical installer for switchgear and secondary circuits of the 6th category

Description of works... Marking of the axes of the places of installation of the equipment. Measurements and drawing up sketches of the installation of individual equipment units. Installation and regulation of complete switchgears and individual blocks and assemblies. Installation of air switches, current and voltage transformers, disconnectors, arresters, overvoltage limiters and earthing switches with voltage up to 750 kV. Installation of power transformers, autotransformers and reactors with a capacity of up to 250 thousand kVA, voltage up to 750 kV. Installation of SF6 cells with voltage over 220 kV. Installation of concrete reactors weighing over 3 tons. Installation and revision of complex electrical equipment. Installation of electrical equipment weighing over 3 tons. Procurement and installation of main, collecting and branch buses, flexible bends and compensators with a cross section of over 1000 mm2. Installation of ready-made packages and blocks of tires weighing over 250 kg. Installation of resonant barriers and connection filters. Installation of support structures for open and shielded busbars. Docking when installing busbar sections (straight and at an angle). Testing of hydraulic and air drives. Installation of batteries of static capacitors. Assembly and inspection of bolted contact connections. Control heating and drying of transformers. Installation of transformer cooling systems. Taking measurements and drawing up sketches for the installation of complex electrical equipment and its individual units.

Must know: electrical circuits; methods of installation, revision and drying of electrical equipment with voltage up to 750 kV and methods of its regulation; methods of installation of wires and cables of all brands; technical characteristics of transformers; the device of electrical installations; technical conditions for putting the installed electrical equipment into operation; rules for performing work in hazardous areas; rules for performing relay protection of mounted equipment.

§ 432. Electrician for switchgear and secondary circuits of the 7th grade

Description of works... Installation of power transformers, autotransformers and reactors with a capacity of over 250 thousand kVA and a voltage of over 750 kV. Installation of air switches, current and voltage transformers, disconnectors and arresters with voltage over 750 kV. Installation and revision of unique electrical equipment. Measurements and drawing up sketches of installation of individual units of unique equipment.

Must know: design and electrical circuits of the equipment to be erected; methods of installation, inspection and drying of electrical equipment with voltages over 750 kV and methods of its regulation; systems of electric drives for remote control, their structure and principle of operation.

Secondary vocational education is required.

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document has been agreed upon: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. This document is checked periodically at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Electrician of secondary circuits of the 4th category" belongs to the category "Workers".

1.2. Qualification requirements - complete or basic general secondary education. Vocational education. Training. Work experience as an electrician of secondary circuits of the 3rd category for at least 1 year.

1.3. Knows and applies in activities:
- the basics of the electrical installation that is being mounted;
- order of arrangement of reinforcement;
- methods of measuring insulation resistance;
- wiring diagrams of medium complexity;
- methods of connection, processing of ends and connection of wires and cores of cables of all brands with a cross-section of up to 70 mm2;
- Methods for marking steel and plastic pipes, cables and bends;
- rules for slinging and moving equipment;
- the structure and methods of using mechanized rigging equipment;
- the structure of assembly piston guns, hydraulic and shock-rotary action of tools, rules for their care and use;
- purpose of relay protection;
- principle of operation and schemes of overcurrent protection;
- the rules for completing materials and equipment for performing electrical work in industrial buildings and engineering structures.

1.4. An electrician of secondary circuits of the 4th category is appointed and dismissed by order of the organization (enterprise / institution).

1.5. The electrician of the secondary circuits of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _.

1.6. The electrician of the secondary circuits of the 4th category supervises the work of _ _ _ _ _ _ _ _ _ _.

1.7. During absence, an electrician of secondary circuits of the 4th category is replaced by a person appointed in the prescribed manner, who acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and duties

2.1. Performs work of average complexity during the installation of secondary circuits.

2.2. Knows, understands and applies the current regulatory documents concerning his activities.

2.3. Knows and fulfills the requirements of regulatory enactments on labor protection and the environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The electrician of the secondary circuits of the 4th category has the right to take action to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. An electrician of secondary circuits of the 4th category has the right to receive all social guarantees provided for by law.

3.3. An electrician of secondary circuits of the 4th category has the right to demand assistance in the performance of his official duties and the exercise of rights.

3.4. An electrician of secondary circuits of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. An electrician of secondary circuits of the 4th category has the right to get acquainted with the draft documents relating to his activities.

3.6. An electrician of secondary circuits of the 4th category has the right to request and receive documents, materials and information necessary for the performance of his official duties and orders of the management.

3.7. An electrician of secondary circuits of the 4th category has the right to improve his professional qualifications.

3.8. The electrician of the secondary circuits of the 4th category has the right to report all violations and inconsistencies identified in the course of his activity and make proposals for their elimination.

3.9. An electrician of secondary circuits of the 4th category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. An electrician of secondary circuits of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the granted rights.

4.2. An electrician of secondary circuits of the 4th category is responsible for non-observance of the internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The electrician of the secondary circuits of the 4th category is responsible for the disclosure of information about the organization (enterprise / institution) related to trade secrets.

4.4. The electrician of the secondary circuits of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and legal orders of the management.

4.5. An electrician of secondary circuits of the 4th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. An electrician of secondary circuits of the 4th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. An electrician of secondary circuits of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

5. Examples of work

5.1. Connection, processing of ends and connection of wires, cores of cables of all brands with a cross-section of up to 70 mm2 in all ways, except for welding.

5.2. Installation of protective devices, covers and fences.

5.3. Fastening of structures and devices using a piston assembly piston.

5.4. Obpresovvannya lugs or soldering them to the cores of cables and wires.

5.5. Checking and regulation of electromagnetic current and voltage relays.

5.6. Installation of clamps and metal support structures.

5.7. Fastening structures by gluing.

5.8. Laying of cable trays and perforated mounting profiles.

5.9. Acquisition of materials and equipment for performing electrical work in industrial buildings and engineering structures.

5.10. Installation of steel boxes and strips for laying wires.

5.11. Installations for ready-made marking of control, measuring and signaling devices, which are not provided with self-recording equipment.

5.12. Marking and connecting the ends of the wires during the installation of secondary circuits of medium complexity.

5.13. Installation of type-setting terminals, measurement of insulation resistance.

5.14. Installation of KSA type apparatus and their regulation.

5.15. Prodzvonyuvannya wires and cables.

The development of the curriculum was carried out taking into account the regulatory documentation for the operation of equipment and safe working conditions:

• Order of the Ministry of Education and Science of the Russian Federation dated July 1, 2013. No. 499 "On approval of the Procedure for organizing and carrying out educational activities for additional professional programs";
• All-Russian classifier of professions of workers, office employees, OK 016- 94.01.11.2005;
• Federal State Educational Standard for secondary vocational education 270843.04 Electrician of electrical networks and electrical equipment, approved by Order of the Ministry of Education and Science of the Russian Federation of April 21, 2010 No. 413.
• Order of the Ministry of Energy of the Russian Federation of January 13, 2003 No. 6 "On Approval of the Rules for the Technical Operation of Consumer Electrical Installations".
• Order of the Ministry of Labor and Social Protection of the Russian Federation of July 24, 2013 N 328n "On approval of the Rules for labor protection during the operation of electrical installations."
• Resolution of the State Construction Committee of the Russian Federation of January 8, 2003 N 2 "On the Code of Rules" Labor safety in construction. Industry standard instructions on labor protection ".

We invite you to undergo training in the profession of an electrician in Moscow!

Electrician of electrical networks and electrical equipment - the functions of a qualified specialist include the performance of electrical work in residential buildings, industrial, cultural and domestic, as well as on engineering structures, on construction sites.

Our center conducts professional training that will allow you to become a specialist in your field!

At the end of the program, you will receive the certificates and certificates required to work as an electrician for electrical networks and electrical equipment.

THE TRAINING PROGRAM IS INTENDED:

• For students wishing to get a profession " electrician of electrical networks and electrical equipment "with the assignment of the category;
• For listeners who want to independently understand electrical appliances, set up various equipment, know rules for performing the installation of electrical wiring.

COST AND SCHEDULE OF LESSONS:

AFTER TRAINING YOU WILL LEARN:

• read electrical diagrams;
• calculate the characteristics of electrical circuits;
• carry out work on the installation of electrical wiring of all types;
• install lamps of all types, various wiring accessories and devices;
• perform various types of wiring connections;
• check the quality of work performed.

TRAINING PROGRAM:

• installation of lighting wiring and equipment;
• installation of cable networks;
• installation of switchgear and secondary circuits;
• repair of switchgear and secondary circuits;
• repair of lighting networks and equipment.

FINISHED TRAINING LISTENERS RECEIVE DOCUMENTS:

• certificate by profession "electrician of electrical networks and electrical equipment" with an indication of the qualification category.
• certificate of additional professional training with the assignment of a profession and qualification category;
• copy of the examination protocol.

WHAT ELSE NEEDS AN ELECTRIC INSTALLER OF ELECTRICAL NETWORKS AND ELECTRICAL EQUIPMENT:

To work in the enterprise, you will also need an electrical safety clearance group. As a rule, an electrician of electrical networks and electrical equipment must have a group of at least III.

Work as an electrician on secondary circuits vacancies as an electrician on secondary circuits in Moscow. Vacancy secondary circuit electrician from a direct employer in Moscow job advertisements secondary circuit electrician Moscow, recruitment agency vacancies in Moscow, looking for a secondary circuit electrician job through recruiting agencies and from direct employers, secondary circuit electrician vacancies with work experience and no work experience. Site of advertisements for part-time work and work Avito Moscow job vacancies electrician for secondary circuits from direct employers.

Work in Moscow as an electrician on secondary circuits

Site work avito Moscow work fresh vacancies electrician for secondary circuits. On our website, you can find a high-paying job as a secondary electrician. Look for a job as an electrician on secondary circuits in Moscow, browse vacancies on our job site - an aggregator of vacancies in Moscow.

Avito jobs Moscow

The work of an electrician on secondary circuits on the site in Moscow, vacancies of an electrician on secondary circuits from direct employers in Moscow. Jobs in Moscow without work experience and highly paid with work experience. Vacancies Electrician for secondary circuits for women.

INDIVIDUAL ENTREPRENEURPOKATSKAYA NATALYA ALEXANDROVNA- Omsk region

Perform electrical installation from scratch on a turnkey basis according to the project. Responsibility, conscientious attitude to the performance of official duties. Electrician Secondary M3 Jobs ... from 30,000 to 45,000

on: data.gov.ru - 5 days / days ago

Novosibirsk

alarms, warning systems, fire extinguishing systems

on: rabota.resumet.su - 8 days / days ago

LLC GAZINFORMSERVICE - Yamalo-Nenets Autonomous District

Participation in commissioning works for implementation and acceptance tests. Participation in the technical support of customer systems. Carry out cabling of communication lines and installation of the equipment used ... electrician for secondary ... from 45000 to 45000

on: data.gov.ru - 8 days / days ago

Limited Liability Company "ZapSibEnergo" - Tyumen region

Execution of works on the construction of secondary circuits. Work on a rotational basis. Execution of works on the construction of secondary circuits. Work on a rotational basis. from 67,500 to 80,000

on: data.gov.ru - 13 days / days ago

NPF Information Security Systems - Tomsk region, Tomsk(+1 city)

Responsibilities: -High-quality, prompt installation, commissioning and maintenance of security systems (fire alarm system, access control system, video surveillance, etc.). Requirements: -Experience in performing work on the installation of a security and fire ...

on: vakansia.net (+4 sources) - 13 days / days ago

LIMITED LIABILITY COMPANY "ALLIANCE ENGINEERING"- Omsk region

Performing job duties according to the instructions. During the interview Conscientious attitude to the performance of official duties from 25,000 to 50,000

on: data.gov.ru - 15 days / days ago

LIMITED LIABILITY COMPANY "TECHNIK" - Kemerovo region, Novokuznetsk

Availability of secondary specialized education in this profession; work experience not less than a year Requirements for the candidate: 25,000 rubles.

on: vakansia.net - 14 days / days ago

LLC "PROFILE" - Orenburg region

fulfillment of job duties in accordance with the job description; availability of technical education, without requirements for work experience. Salary 11383.6 plus incentive payments. from 13950

on: data.gov.ru - 12 days / days ago

LLC Corporation AK ESKM - Krasnodar region, Krasnodar(+1 city)