Do-it-yourself home fountain. We master the creation of a simple fountain or waterfall with our own hands Do it yourself from improvised materials

The intense rhythm of our life involves periodic rest, both physical and moral, and there is nothing more pleasant than sitting in silence, enjoying the beautiful view and pleasant sounds.

For this purpose, decorative fountains for an apartment can be suitable, which fully meet all these requirements.

After all, there is nothing more pleasant than listening to the sound of murmuring water and looking at a pouring fountain. And to build it in an apartment, even if small in size, is a completely solvable task.

In addition to the listed useful properties of this structure, the fountain in the apartment is a good air humidifier.

In contact with

classmates

Types of mini-fountains at the place of application

Small home fountains can be divided into several types. According to the place of application, they are divided into country and indoor fountains. It is clear that a country fountain, in most cases, is installed on the street, and a room fountain in a city apartment. The country fountain is made large and it is important to choose the right place for its installation.

Do-it-yourself decorative fountain in the apartment video:

Place to install a country fountain

When choosing a place, it is important to observe three important conditions:

It is highly undesirable to install near trees. Firstly, growing roots can damage the fountain bowl and its waterproofing. Secondly, falling fruits and leaves can also disrupt the water system and the bowl.
If the fountain is installed in open areas, then flowering of water may occur due to direct exposure to the rays of the sun.
If the fountain is installed in the immediate vicinity of the house, then additional dampness may form on the building during windy weather, due to the drift of water drops from the fountain towards the house.

Classification of fountains according to the type of falling water

According to the type of falling water, a decorative fountain can be divided into several types.

Waterfall. This view has a ledge design with falling water. It has a beautiful appearance and is used most often.
Cascade. The installation scheme is the same as that of the first type, only it consists of several water flows. The liquid in them overflows over thresholds or inclined ledges.
An ordinary fountain, made in the form of a jet beating up and spraying spray around it.
Fountains made in the form of streams and lakes. They have an original appearance and are becoming increasingly popular.

Do-it-yourself indoor fountain

Looking at the decorations of some fountains, it seems that their manufacture and installation are very difficult to perform. Yes, there are rather bulky designs, and their installation will require you to have serious professional skills and knowledge, but a small do-it-yourself mini-fountain is quite capable of being made by almost every person who has simple skills in construction and installation work. In addition, you will create a design based only on your preferences and taste, the most suitable for your home interior. In addition, you will save a lot of money.

Materials and tools

So, if you still do not know how to make a mini fountain in your apartment, then read our step-by-step instructions. Before starting this work, you need to purchase the necessary materials and tools.

Fountain container. It can be a basin, a flower pot or something else at your discretion.
The hose used to clean the aquarium is about 10 cm long.
Polyethylene with dimensions slightly larger than the container.
Glue waterproof, expanded clay.
Aquarium pump.
Medium or large sink, and stones or pebbles to strengthen it.
Small shells and colored ground used for decoration.

The bowl for the fountain, which we choose, needs to be checked for cracks and holes in order to prevent future leaks.

Fountain materials

Pump installation

If you are making a tabletop fountain, then you first need to find a hose to work through which a stream of water will come out. To do this, cut off 10 cm from a regular aquarium hose and insert it into the pump. Immediately check whether your system is in working condition so that you do not return to this issue later. We install the pump to the bottom of the tank and fill it with expanded clay. Do not forget to level the surface after backfilling.

Final work

After you have filled up the expanded clay, you need to cover it with a film, having previously made a hole for the hose. Then we put decorative soil on the film.

Note!

For a sea shell, it is advisable to make a base of stones and fix them to the shell using waterproof glue.

The next step is to push the tube through the stones and the sink, after making a hole in it. The end of the hose should protrude from the sink by about 1 cm. The surface of the fountain should be decorated with stones and shells at your discretion. Thus, you saw that you can make a table fountain with your own hands without spending significant effort and money.

Advantages of a fountain without a pump

If you think that when building fountain structures, it is imperative to use a mini fountain pump, then you are mistaken. You can make a small fountain without using a pump, while it will work solely thanks to the laws of physics.

Yes, in these designs there are some restrictions on the power of the jet, but then you do not have to spend money on electricity and buy and connect a pump. You need to know that such a fountain should not be large, otherwise you cannot do without a pump.

decorative fountain

How the fountain works

Such a fountain will work on the principle of communicating vessels, with only some peculiarities. They need to be placed on the same level, connected to each other by two tubes. It is better to take plastic containers and preferably of the same volume, and tubes with a minimum thickness for longer uninterrupted operation of the fountain. The tubes are inserted into the bottom of each vessel, into pre-drilled holes, which then need to be sealed.

Illuminated fountain

Final assembly and installation of the fountain

In order for such floor fountains to work without a pump, you need to use a third vessel, equal in volume or greater than the previous two. To this vessel, in the walls, closer to the bottom, make two more holes, where you insert the two ends of the tubes from smaller containers.

We also tightly seal the inlets of these tubes, and insert a T-shaped adapter into the bottom of a large vessel. After that, the design of your fountain is considered complete. You will have to arrange it according to your taste, preferences and combination with the interior of the apartment.

Garden fountain

Where can I install apartment fountains. As you probably already understood from the above, fountains for an apartment come in a variety of types. In addition, they can be installed not only on the floor, but also on the table and even on the wall.

Note!

Desktop structures are usually the smallest in size and can even be placed on bedside tables and a window sill.

Floor fountains depend on the size of your apartment and can look quite impressive. Wall fountains look like real works of art and look like pano or paintings.

Their installation and manufacture, of course, is more complex and requires much more skills and material, but with a successful performance of your own, you will get indescribable pleasure contemplating them.

Watch a video on how to make a decorative fountain in an apartment with your own hands:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Even the smallest fountain is capable of transforming the landscape of a summer house or a private house beyond recognition. This decorative building will definitely become your favorite recreational area on your site, because it will give you the opportunity to unite with nature at any moment. Would you like it to become a reality sooner? There is nothing super complicated here - everyone can make a fountain with their own hands. Don't believe? Then to your attention is a step-by-step instruction with a photo, following which you can quickly and without the involvement of professionals get a spectacular and functional fountain.

Choosing a fountain

First of all, you need to choose the appropriate fountain option for your site. We are talking about its dimensions, shape and materials. When solving this issue, be guided by the area and style of the courtyard of your summer house or private house.

So, for a large area, it is better to choose a classic sculptural model, which will become the center of the landscape composition. And for a modest courtyard, fountains in the form of small architectural forms are suitable: sea shells, fairy-tale heroes, houses, pots and other similar figures.

But it is not necessary to buy a ready-made sculpture, because you can also build a fountain with your own hands. The simplest option is the construction of stones. To make it, lay large flat stones on top of each other, make holes in each of them with an electric drill and string all the resulting products onto a copper pipe - it is through it that water will flow to the top of the structure. Then close the gaps with small pebbles and seal the gaps with silicone sealant.

Choose a location

The next step is to decide where exactly on the site the fountain will be located. In order for the structure to fully fulfill its aesthetic function, it cannot be installed “anywhere” - it is important to choose the best location. And for this you need to take into account several nuances.

Firstly, the fountain does not have a place in a too open area, since under the influence of active sunlight, the water can begin to “bloom”.
Secondly, the fountain cannot be placed among powerful trees - their roots can provoke deformation of the reservoir and waterproofing. In addition, leaves, fluff, fruits and seeds of trees will constantly pollute the fountain.
Thirdly, the structure should not be too close to the house, otherwise moisture with the wind will fall on its walls.
Fourthly, it is undesirable to stir the fountain in the open wind so that its gusts do not “tear off” the jets.

Thus, the ideal location for a decorative fountain is a light penumbra surrounded by flowers and low bushes.

When you choose a place, proceed directly to the arrangement of the fountain. It involves the phased implementation of three main groups of work:

tank preparation;
pump installation;
installation and decoration of the fountain.

Preparing the tank

In order for the fountain to be durable and solid, it is necessary to equip a special reservoir for hydraulic equipment and water. This is done as follows:

Dig a pit of a pre-calculated depth and the diameter you need.

Important! The depth level of the tank must be below the ground level so that the soil around the fountain bowl does not wash away and the base does not deform.

Pour a thin layer of sand on the bottom of the resulting pit and carefully reinforce its side walls with bricks.
Cover the inner surface of the pit with a dense plastic film - it will prevent the passage of water.
Fix the film along the top edge of the tank and seal the seams with frost-resistant silicone sealant. Pour stones at the bottom of the pit, distributing them over the surface of the film. Stones should not be sharp so as not to deform the film.
Install a small emergency drain near the pit in order to prevent the water level in the tank from rising.

Installing the pump

The fountain will not be able to work without the most important mechanism - the pump. It is he who is responsible for the continuous movement of the water flow. The general principle of operation of the pump is simple: water is ejected through the nozzle into the tank, then it enters the pipeline, where it undergoes coarse and fine cleaning, and then the already purified water is sent back to the nozzle.

The quality of the functioning of the fountain directly depends on the type of pump:

Submersible - works on the principle of a centrifuge and is located in the center of the fountain tank under water. This is a cheap, but reliable device, for the installation of which no fasteners are needed - the submerged pump is quite heavy, so it does not budge. It is suitable for small weak fountains.

Surface - a more serious type of pump, which is not installed inside the tank, but on its edge on the surface of the earth. Such a device is designed for large fountains with a complex design.

The pipeline for the pumping system can be constructed from plastic pipes. Their optimal diameter is 16 mm.

Advice. In order to enhance the operation of the pump, additionally install a pressure tank - it will guarantee a constant pressure of the water flow.

Fountain decoration

After the main functional elements are installed, you need to take care of the installation of the fountain itself, or rather its upper part. If you are using ready-made sculptures, then they must be provided with special fasteners for installation. But a home-made stone fountain is best installed on metal slats, previously laid on top of the tank.

Then proceed to decorate the design. The fountain can be decorated with plants, stones of various sizes, clay figurines, microsculptures and any other details that seem appropriate to you on your site.

Do not forget about such a spectacular decor tool as lighting. It can be underwater lamps, light strips, floating lanterns, ground lamps - here you are also unlimited. But remember that lighting structures must be completely sealed, and all their contacts must be protected from water as reliably as possible, otherwise it will be unsafe to use them.

When all work is completed, fill the tank with water and start the fountain.

As you can see, to make a beautiful fountain with your own hands, you do not need to work hard and spend a lot of money. Do not deviate from the instructions, use high-quality materials and do not be afraid to experiment with decor - by following these three simple rules, you will definitely get a functional fountain that will delight your eyes and tune in a positive way for many years.

Which fountain to choose for a summer residence: video

Fountain in the country: photo

Any fountain, even the most modest size, will become a bright accent in landscape design. On summer days, this is a great opportunity to improve the microclimate in the recreation area, because the fountain acts as a natural air humidifier, and even at noon it will be cool and fresh near it.

Decorative fountains and features of their installation: we select the style, place and equipment

Before you build a fountain in the country, it is important to ensure that its design matches the general style of landscape design, and that it is proportionate to the site. The larger the area of the site, the more massive and representative the fountain can be - on a standard six acres, a large structure with sculptures and high sides will look extremely ridiculous.

Therefore, the type of landscape should be taken into account:

classic garden - a garden with a strict, consistent layout is perfectly complemented by a sculptural fountain: ancient gods, young maidens, cupids and monsters

natural garden - “natural” fountains, geysers or mini-waterfalls, framed with natural stone, pebbles and wood, designed in a naturalistic style, will be appropriate here. Or it can be a stylization of a spring, in which a timid trickle of water breaks through a pile of stones.

modern garden - fountains are built from metal and concrete, natural and artificial stone, polymers and glass. Such a fountain is a thoughtful composition, the stylistic belonging of which is emphasized by decorative elements that make it rich and interesting. Minimalist fountains are characterized by thin, filamentous jets of water.

country music- it can be a composition of clay jugs and boulders, stylized as an old well. A characteristic element of such fountains is often a mill wheel.

Separately, it is worth mentioning floating fountains - they can be launched into any relatively large body of water. In these fountains, the pump has a special float, so it can drift freely over the entire surface.

It is very important to choose the right place:

the fountain should not be located in the zone of active sun - the sun's rays will provoke the development of microscopic algae, the water will "bloom"

at the same time, you should not place the fountain near trees - the root system can damage the fountain bowl, violate its tightness. In addition, leaves, fluff, seeds and fruits that enter the water will clog the filters.

drops of water should not fall on plants, garden furniture or the walls of the house - excessive humidity can cause damage to things and provoke the death of plants. The recommended distance is at least 50 cm from furniture, walls and plants, but here you should also take into account the height of the jet and the possibility of moisture being carried by the wind

proximity to a source of electricity to connect the pump

The next step in creating a fountain is the selection of equipment:

container - for the fountain bowl, you can use ready-made plastic fonts (tanks), which provide reliable waterproofing and are frost-resistant and durable. For a large fountain, you will have to prepare and concrete the pit manually

pump - the continuous movement of the water flow is ensured by connecting the pump. The pump from the bowl, through the pipeline, takes water and pressurizes it to the nozzle, thus the pump acts as the "heart" of the entire system. According to the installation method, pumps are divided into two types. Submersible (underwater) mounts in a bowl, directly in the water (Fig. 1), they take water directly from the font and feed it through a pressure filter to the nozzle. They are located on a slight elevation - this will prevent bottom sediments from entering the pump. The main advantage of such a pump is ease of installation and compactness.

The surface pump (Fig. 2) is mounted on land, it sucks water through the filter through the water supply and then delivers it to the nozzle under pressure. The advantage of this approach is the reliability and durability of the pump, as well as ease of maintenance. The power of the pump is selected depending on the desired jet height (water flow intensity) and the available fountain bowl.

The filter is an important detail for a home fountain. From the bowl of the fountain, water enters the pump, in most cases, with some contamination. If the water is not filtered, the pump will quickly lose its efficiency.

backlight - add decorativeness to the fountain, especially in the evening

receiver - a pressure tank, the installation of which will maintain a constant pressure of water entering the nozzle, thereby achieving stable operation of the entire system

If it is not possible to connect to electricity, you can assemble a fountain in the country with your own hands without a pump. Its design is based on obtaining a liquid pressure drop. This will require a large container filled with liquid, and a nozzle installed 0.5 - 1 m higher than the liquid level. Due to the pressure drop, water streams will be pushed out, but they will be rather “sluggish”, they will not splash much. This option is suitable for fountain streams. In addition, you will have to constantly monitor the liquid level, since the water pressure created with this design is quite low.

An important point is the selection of nozzles. They will help diversify and transform the fountain, creating a variety of water patterns, forcing water to flow in the right direction. The water passing through the nozzle is distributed in a certain way, foaming, spraying, saturated with air.

How to make a fountain with your own hands in the country: a step-by-step guide

The technology for creating a simple fountain with your own hands is quite accessible, let's consider it using the example of a fontanel fountain. It will be a spectacular detail in any garden, while it is easy to operate, it can be easily cleaned, repaired and put away in the barn for the winter without much effort. Having chosen a suitable place, we dig a round hole, the internal recess of which should correspond to the size of the container for the bowl used for the fountain (Fig. 3). Around the pit, we additionally pull out a gutter with a depth of about 10 cm.

Each owner of a suburban area seeks to make his home and the space around it as comfortable as possible and at the same time beautiful. After all, a well-designed landscape design is not only a decoration of a summer cottage, but also a harmonious combination of different zones in one area. How nice after a hard day to have dinner in the gazebo with your family or relax on a bench in the hot summer, enjoying the coolness of the fountain. It is about him that we will discuss in our article, and more specifically, how to make a fountain with your own hands.

Advantages

Most would agree with psychologists that the sound of water has a calming effect on the nervous system. A person watching the flow of water internally relaxes and gains emotional balance. You can sit for hours at the fountain, watch its play and splashes, think about your own.

There is nothing complicated in the design, so almost anyone can install a fountain in the country with their own hands - you just need to have the desire and the necessary materials. We will also consider the latter in our article.

The incomparable advantage of the fountain is that it can be an excellent addition to the landscape design of any suburban area. In addition, a home-made fountain with the right lighting will become your guests' favorite vacation spot.

Depending on your preferences and the general style of landscape design, the design of the fountain is also selected, but also consider the size: if the area is small, then you better install a small garden fountain with your own hands.

How it works?

The device uses the principle of circular water supply. In other words, initially a certain amount of water is poured into the reservoir (bowl), which, using a pump, then circulates throughout the entire structure. Above the surface of the bowl there is a nozzle to which water is supplied. To prevent the bowl from overflowing, a special device is installed in it that regulates the amount of water.

This is a generalized diagram that describes the simplicity of the design. Therefore, by installing a fountain in the country, you do not need to think that water consumption in the area will increase. Simply fill in the required volume of water once and from time to time only check the degree of contamination. Although the pump has a filter, the water should still not be too dirty.

Choose a place

Of course, before you install the fountain with your own hands, you must at least visually determine the most suitable place for it. And even better - draw a plan in order to have a specific idea of \u200b\u200bthe location of the structure and take into account all the nuances in advance. Here are some practical tips for choosing a location:

The structure should be visible from any point on your site and not block the paths.
If there is a gazebo or a summer kitchen on the territory, then a cozy do-it-yourself fountain will be an ideal addition to such a recreation area. If you have a playground, then you can make a mini fountain nearby with your own hands - children will be happy to splash in it in the summer.
Study the relief of your site and find a low-lying place - it is best suited to install a fountain on the site with your own hands - in the warm season it will be cool and comfortable here.
The presence of trees nearby will not have the best effect on the operation of your fountain - the roots can damage part of the structure underground, and the falling leaves can clog the water. At the same time, too open space in direct sunlight can cause the water to “bloom”.
It is best to install the structure away from the house, as gusts of wind can carry the water jet to the side, from which the walls will be constantly wet.

Varieties

Surely, many noticed that the fountains outwardly differ from each other not only in design, but also in design. Some are made in the form of reservoirs with nozzles, others - on a stand in the form of jugs, statues and other devices from which water flows.

Accordingly, fountains are of two types:

submersible;
stationary.

The first option has a simple design and is often found in suburban areas and even in homes. To make a similar home fountain with your own hands, you will need a bowl, a plastic pipe, a pump and a nozzle.

Stationary have a more complex design and pompous appearance. Such devices can often be found in city parks and squares. For this option, you already need to lay the foundation, since the body is made mainly of stone or marble - durable materials that are resistant to aggressive weather conditions.

For a large area of ten to twenty square meters, a large stationary fountain is suitable, for a small area, it is best to install a submersible one. Well, the style of landscape design also dictates its own rules: for a Japanese garden, for example, a submersible type is suitable.

Construction design

As we noted earlier, the style of design also plays an important role. After all, all elements of landscape design should complement each other and be in harmony with each other. The most common option is the classic submersible jet fountain. Its construction does not require large financial and physical costs, and it will look advantageous in any design. Especially if you want to supplement an artificial reservoir with it. If you want to see options for how do-it-yourself fountains can look like, we presented a photo idea at the end of the article.

The shape of the bowl is most often symmetrical - it is either a circle or a square. Along the edges, you can lay out a decorative stone or pebbles, add greenery. Only plants must be moisture-loving, otherwise the appearance of the composition will be hopelessly spoiled by rotting plants.

Necessary materials

Before you make a decorative fountain with your own hands, you should take care of the materials and tools for construction in advance. If you want to make a stone fountain, then you will need the following materials:

smooth rounded and flat stones of different sizes;
gravel or crushed stone for drainage;
bowl for water;
water pump;
copper tube;
clutch;
plastic pipe of small diameter;
silicone;
boards to strengthen the structure.

In accordance with the above materials, you will need tools:

hammer;
jigsaw or small saw;
scissors;
fum tape;
drill;
sliding key.

Depending on the desired decor method, additional materials and tools may be needed. Here you can orient yourself according to the situation or make a list of necessary items for work in advance so as not to be distracted in the process.

Pump installation

Undoubtedly, the main and important part of the whole structure is the pump. If you are a beginner and still do not know how to build a fountain in the country with your own hands, listen to our advice: you need to approach the choice of a pump thoroughly. First, consider the volume of the bowl - the larger it is, the more powerful the pump will be. The presence of a filter will protect it from various debris and extend its service life.

There are two types:

surface;
submersible.

The first type is installed on the surface, but in no case above the water level. This is where the principle of communicating vessels comes into play.

It is advisable to install a submersible pump not at the very bottom of the bowl, but at some elevation - then the sediment will not enter the filter. Keep in mind that the pump will consume electricity, so make the necessary communications in advance and provide a safety shield.

Even if it is not possible to install an electric pump, do not be upset - then we will tell you how to make a fountain in the country without it.

Design without pump

Without a submersible pump, you can make an open fountain. If you have a well with a pump on your site, then you can bring this water through the pipe into the fountain. The only thing you will need to decide on the place of water flow - for example, you can turn on the fountain and water nearby plants at the same time.

Thus, you can create mini garden fountains with your own hands at several points on your site.

External design

Of course, you should not forget about the end result of your work. The appearance of the finished structure should be pleasing to the eye, and the backlight will allow you to enjoy the beauty of the fountain in the evening. Here are some decorating tips for you:

You can use a variety of nozzles: the shape of the jet will depend on their shape. It can be in the form of a dome, an umbrella and even a geyser.
Properly selected lighting will add zest and mystery to the reservoir. Light sources can be installed not only around the perimeter of the fountain, but also under water. And it is not at all necessary to use standard options - the multi-colored glow of water will definitely fascinate any viewer.
Use flowers and shrubs to decorate the pond - thanks to them, the impression of a truly "paradise" corner will be created.

We offer you to see how beautifully decorated do-it-yourself garden fountains, photos of which are below.

Ideas and important little things

There are many photos of country fountains on the Internet, methods of their construction are described. You can also find enough information on how to make a home fountain with your own hands. Yes, yes, such mini-devices look very original and complement the interior. Such designs are especially popular among supporters of Feng Shui. Of course, the process of their construction is much simpler and cheaper - and the dimensions are quite small.

If you still have a desire, but do not know how to make a fountain at home, we will help you make the right choice and give some useful tips:

If there is no space on the site, the fountain can even be made at home - in the hallway, for example, or in the greenhouse. Its dimensions can be completely different - depending on your desires and the available space.
A submersible fountain can be made from improvised means - an old cast-iron bath or a bath cut along a car tire, a large flower pot, a wide basin can serve as a bowl.
The stationary version can be made in the form of a jug, bottles, stones, in the middle of which there is a water hose - this is also a great option for a home-made design.
The fountain does not have to be placed separately - it can be part of a wall or landscape composition.
The cascade fountain belongs to the stationary type, and has an undeniable advantage - such a structure can become the fruit of even the wildest imagination. The matter can be limited not only to traditional pots from which water pours and overflows, but also to entire structures in the form of garden carts, samovar teapots, watering cans with buckets, etc.
Fountain elements can be painted in various colors, often using special treatment compounds to prevent moss and mold.

And, of course, do not forget about care - with the onset of cold weather, the fountain must be turned off, the water drained from it and the entire structure covered with a film before the onset of heat. In this case, your little country oasis will delight all households and guests with its joyful murmur for many years to come.

Photo gallery

We bring to your attention a successful selection of 30 do-it-yourself fountain design photo ideas.

Video: we make a mini stream on our own
Video: pond, stream for home
Principle of operation

Video: a small version of the stone yourself

Design features
Construction assembly

Video: an interesting option from a tire

The fashion for fountains for apartments and houses appeared in our country a long time ago and is currently experiencing its second birth. Such a decorative technique for interior design of living rooms is still considered an original solution to revive it and give some freshness to the interior space of the premises.

How to make a fountain with your own hands? If there is enough space, it is possible to build a home fountain or a small lake with water lilies - all this is a matter of your imagination and taste.

A home fountain can be a good way of arranging the little lived-in corners of your apartment (balconies with plants, for example). If the area is small, then you can make a mini waterfall.

Back to content

Video: we make a mini stream on our own

Before you start building a waterfall, you should study a number of examples in photos and videos on the Internet, where indoor fountains are presented in all their diversity. Having decided on the size (mini or larger version), appearance, design (waterfall, stream, etc.), you can start creating a fountain with your own hands.

Back to content

Video: pond, stream, home

Back to content

Principle of operation

The indoor fountain is very simple and consists in organizing the circulation of the water mass in a closed cycle, which is carried out by means of a compact electric pump. At the same time, water rises to a collection point located at some elevation, from where it flows or falls like a small waterfall into a special storage tank.

Back to content

Video: a small version of the stone yourself

The choice of a suitable shape and design, according to which a home fountain will be created, will, of course, depend on the features of the interior of your apartment. At the same time, you can always complement the waterfall with well-designed lighting and unobtrusive soundtrack so that it turns into the decorative element of your dreams. Home fountains should relax the owners and decorate the room, causing delight among the guests. Suitable options can be searched in the photo.

Back to content

Design features

The simplest do-it-yourself indoor fountain can be made from the following minimum required set of components:

base on which indoor fountains are mounted (receiving tank);
standard silicone hose;
mini pump from an aquarium or another pump option;
a container used as a source (or several to make a waterfall, as in the photo at the beginning of the article).

In addition, for the design of the composition and decoration, you will need decorative soil, expanded clay and other auxiliary materials. Home fountains should look interesting to decorate the interior. Examples can be seen in the photo.

As a source, you can use a large sea shell or an elegant mini jug, in which an inconspicuous hole should be drilled. It will be needed to install a piece of silicone hose into the “source”, through which water will be supplied to this container using a pump or pump. As a base (receiving container), you can use a regular flower pot.

Back to content

Construction assembly

We begin to assemble a home fountain with our own hands by fixing a piece of silicone hose on the pump tip and placing the latter at the bottom of the receiving container. We also put expanded clay here and cover it all with a dense plastic film (preferably black), in which we cut a hole and pass a piece of hose from the pump through it.

Back to content

The film will delay expanded clay from surfacing when the container is filled with water. On top of the film we lay a layer of colored decorative soil. Do-it-yourself indoor fountain is almost ready.

The source stand can be built from stones glued together with waterproof glue, before passing the hose from the pump through it. After that, you just have to pass the hose through the hole drilled earlier in the source and cut off its excess. Your waterfall, stream, pond is ready!