At the same time, at the same time, I finally arrive at each house when it is already possible to postpone the bathroom with your own hands, as the old tile and wallpapers that walls are saved, have lost their attractive look or, even worse - gradually began to lag even from the surface, and all Pipes just rushed to the impossible state.
An even stronger the desire to make repairs becomes at the same time that on the shelves of building materials there are more and more materials capable of turning quickly and for the reasonable cost to turn even a small room into the "Euro" class room, which will admire all guests at home.
If you are interested in the instruction for bathroom repair, then the main essence that you must understand it is that a sequence of action takes place must be respected. Then even allowed errors without problems can be eliminated, without spending more time and strength.
Difficulties in independent repairs
Many builders suggest that the most difficult stage of repair is considered all those actions that will need to be done by the features of the room.
For this reason, it is especially important to approach the choice of materials to be used in the future for the ceiling and wall finishing, since all materials used must necessarily be waterproof.
Also complicated are works related to dismantling equipment and various coatings. It is much easier to repair the bathroom and toilet in the new building, since it is usually not more than a pair of square meters.
Before you begin to make it yourself repairs, be sure to disassemble the whole process in detail, since it will be necessary to take into account during the work of all parts of the installation of equipment and materials.
Bathroom repair nuances
First, in order to avoid education, the fungus is in no case to equip between the decorative and main surfaces of the cavity. For the same reason, the decoration of any walls of plasterboard, characterized by water resistance and plastic is prohibited.
Secondly, in accordance with existing construction standards, you should not install switches and sockets during repairs.
There are options how to get around this restriction, but still do not forget about high moisture indicators that determine a sufficiently high risk of lesion.
Thirdly, during the repair of the bathroom room, it is better not to use materials that are susceptible to rotting or are hygroscopic, corrosive.
Fourth, when the area of \u200b\u200bthe repaired room is quite small, it makes sense to install a modern shower cabin instead of the bathroom of large sizes.
Ceramic tile: Nuances of use
A rather important question is the choice for the walls of the ceramic tile, when you start repairing the bathroom in Khrushchev, because here it is necessary to take into account quite a lot of different criteria.
You should be very priority to know that all the tiles used to finish today the surfaces of the walls and the floor are divided into various types, to find out which you can carefully studying the packaging. The manufacturer must indicate it.
Given the international standards, to designate the highest grade today is used today, a bright red color, a second grade - bright blue and, accordingly, for the third - green.
If you stop in detail on the highest grade of the tile, then you can see a 5% deviation from the norm, which is considered to be admissible today.
When buying a second grade, you can see about 1/4 part of the tile with defects. Therefore, having decided to save money, do not be surprised later, that in almost every batch of the party there will be something or another deviation from the standard that was installed. Of course, the photo repairs of the bathroom in the future are unlikely to become a model for other apartment owners who have decided to update the bathroom.
When buying a tile, be sure to take at least a small stock. Since the marriage when laying is almost inevitable, it is necessary to determine a certain amount with full compliance of the shade.
During the choice of flooring, see the ideas of the bathroom repair ideas, for sure you will be able to find interesting options. One of the most popular materials today is a porcelain stoneware, as well as a special tile, intended exclusively for the floor. Materials are characterized by good durability indicators, they have a rough surface, which is especially important for the bathroom.
By buying several packs at once, do not forget to verify the specified part number on each of the selected packages, as well as check the tile size. If you notice that the difference is more than one millimeter, it is better to take another packaging.
All necessary for the repair materials buy with a margin, because a few percent of their total quantity will be written off on trimming and battle.
Make yourself quickly repairs in the bathroom may not be as easy as it seems at first glance due to the small size of the room. Nevertheless, if you make all the efforts are needed, use quality materials and tools, cope with the task completely for everyone.
Photo repair of the bathroom
Bathroom room due to frequent operation from time to time requires repair and updates. It is very important, because the bathroom fulfills the function not only the venue of hygienic procedures, but also serves as a kind of seating area and relax.
Allocate such types of work on the restoration of the room:
What needs to be taken into account before starting repair work
As a rule, the bathroom in the typical apartment of a multi-storey house takes a small area. Nevertheless, even repairing a small bath and toilet, the photo of which can be found on our website, requires significant financial investments, since material for cladding, cement and other necessary things need to be purchased. It is important to foresee and calculate everything in advance.
Interior design bathroom in light blue colors
Tools will be useful to you during the work: a knife for cutting a pipe, a mounting level, a toothed spatula and a scraper with a flat surface, a tiles. It should also be stocking a special key for the sink.
It is advisable to strictly observe the steps of repair work. If you competently approach the process of updating the room, the bathroom after the restoration will delight you with functionality and comfort, and the repair itself will not seem so long and time consuming.
We dismantle the plumbing
So that your bathroom really has changed and looked presentable, as in professional magazines with fashionable author's interiors in the photo, repair of the bathroom and toilet, you need to start with the replacement of old plumbing. We liberate the room for conducting basic work: setting new communications, repair of wiring, laying ceramic tiles. If the bathroom is combined, you need to dismantle the toilet, sink and bath.
First you can endure the bathroom. To do this, we remove the fastening that the legs of the bath are fixed, then unscrew the drain pipe.
Fastening on the legs of the bath
The next step involves disassembling the mixer. Before that, do not forget to turn off the supply of hot and cold water.
In the same way, disconnect the sink. Often it is fixed on the brackets that will need to unscrew. If you need to cut pipes, use a special knife for this. At the same time, it is important to perform work neatly so as not to damage the rest of the communications.
Removing the toilet is usually starting with a tank. It takes water from it and disconnect the hose. The first to remove the tank, then disconnect the attachments and the toilet itself.
Dismantling of a drain tank
After you free the room from all the old plumbing, you can move to the preparation of walls, ceiling and floor.
The old coating is removed, all the remains of muddy paint and plaster must be completely removed. So that the construction garbage does not complicate work, it needs to be taken immediately.
Replacing pipes in the bathroom
When disassembly is complete, you can go to laying pipes. Overhaul of bathrooms and toilets, photo which after the update can be found on our website, it is difficult to imagine without replacing old communications. Experienced masters recommend to purchase modern plastic instead of steel products. Such pipes will serve for quite a long time.
Plastic tubes for bathroom
They are easier installed, not covered with a lime bloom and rust. Such modern types of communications do not require welding. The cost of plastic pipes is low. Old systems need to cut and put new ones. Modern pipes are easily mounted using special clamps. The choice of precisely metal-plastic products for the water supply is to date the most acceptable option. You can probably learn some ideas for the design of the bathroom, examined ingallery On our site approximate repair of bath and toilet, photo. From plastic and other materials, modern technologies allow you to make enough durable pipes that are easy to install.
Communications are desirable not to close in the wall. However, if they still be hidden, do not forget to remove the drain hose for the washing machine.
Replacing electrical wiring in the bathroom
After installing pipes, you can go to the laying of wires. They are placed in special grooves on the wall. The masters usually pave a double insulation tight wiring, use entire sections of the cable. For electricity in the bathroom, some requirements should be followed. Wires must be hidden under plaster or plasterboard, the camshaft is placed outside the room.
Staying wiring in the bathroom
Floor and wall decoration
Repair of the bathroom and toilet, the photo, which is offered to your attention in the gallery of this article, after laying the wiring provides for the next stage - wall cladding. First you need to prepare the surface to finish. Walls need to dry with a construction dryer and align.
Preparation and alignment of bathroom walls
Sometimes, due to a constantly elevated level of humidity in the bathroom, a mold fungus appears. To prevent its distribution after repair, it is necessary to provide high-quality ventilation of the room.
Those sections of overlappings that were injured from mold must be carefully cleaned, coated with a special antiseptic solution. After drying the mixture, the wall should be plastered. Sometimes it is advisable to process the entire facing surface with an antiseptic to avoid the appearance of mold fungus.
When you complete the preparation of the walls, you need to fix with the help of tapers of plasterboard sheets on a metal crate. It should be remembered that for the bathroom it is necessary to use moisture-resistant plasterboard.
During the repair, the ceramic tile is first carried out, and then installed plumbing. The number of facing material must be purchased based on the exact sizes of the floor and walls plus 10 centimeters about the reserve.
Wall decoration with ceramic tiles
In the process of laying and cutting products, some tiles can be deformed, so it is better if the finishing material is slightly more than required.
Sometimes in the process of work it becomes clear that the lining of the whole wall is not possible to implement a whole tile. In this case, the most notable angle is chosen on the surface, and it is starting to lay products. This allows at the end to lay inesttic trimming of the tile in the place where it will not be too rushing into the eyes.
For even rows of ceramic finishes, experienced masters use a wooden rail, which is placed three tiles taking into account the seams. Then on the bar make dotted marking, noting the position of the tile. This sample serves as a guideline in the formation of interputric seams during laying. At the same time, it is important that no emptiness remains under the products.
Products must adjust to the base as close as possible.
For small-sized bathrooms, it is good to use the laying of a tile with a split color: panels from the bottom to bore a dark tile, and at the top to use light ceramics. This approach will allow you to visually increase the small area of \u200b\u200bthe room.
Some features of the styling of the tile in the bathrooms
As an outdoor coating in the bathroom, it is advisable to choose a rough tile. There is a special tile for a bathroom with anti-slip properties. Before starting to lay the laying, the waterproofing should be paved and align the floor surface.
To even near the plumbing pipes, the tabel laying looked beautifully, a little patience will be required. For this purpose, two semicircles are drawn on both parts of the tile, corresponding to the pipe diameter with a small margin of 2 millimeters. Then carefully cut the product over the lines and so the tile is laid around the pipe.
At the final stage of laying the tile, the interlocking seams are grouting with a special composition. This pasty solution is convenient to apply a special rubber spatula. With the help of sponge, the residues of the grout wipe. After some time, the seams will be lit. After that, it is recommended to wipe the new tile with a rag or foam rubber again.
Installation of sanitary equipment
When the ceiling, walls and floor are ready, you can move to the installation of the new toilet, sink and bath. The sink is installed on the end of or on the pedestal, and the installation option on the brackets is also possible. Installation of a washbasin on a pedestal - a good choice for those who do not like in the interior of the bathroom anything superfluous.
Appearance of the sink for the bathroom on the pedestal
This montage method allows you to hide under the basis of all pipes.
It should be remembered that the crane should be installed before mounting the sink.
On the wall there are places of fastening of a washbasin and a pedestal. After that, you can fix the sink. The pedestal is installed under it, after which they produce pipes of hot and cold water supply pipes, attach siphon.
Siphon fastening in the bathroom
At the end of the installation work, the hole between the sink and the pedestal is filled with silicone. Also seal the slits in the places of contact of the washbasin with the wall and the floor.
If the bathroom is small sizes, it is better to choose the installation option for plumbing on the brackets. At the same time, the pipes can be hidden by the sheets of drywall for which the tile is placed.
If you decide to install the bath yourself, you need to perform work carefully in order to avoid damage to new water supply systems. By choosing a bath for a bath, it is put, and then, slightly tilting to the side, fix distant legs. Then you need to lower the product, lift its external edge and attach the neighboring supports.
At the end, do not forget to check the stability of the plumbing equipment - the bath should not be fused.
Checking the smooth position of the bath after installation
If you purchased a modern model, there will be no problems with installation. New products are usually equipped with adjusting devices.
After installing the bath to it put the strapping and seal all the joints. Rings strapping fix on bolts from the front of the product. Then connect the corrugation through a special gasket in the form of a cone.
To check the bath on the flow, under the bottom of the product in the place of the plum put the paper. The drain hole is closed with a plug, water is gaining. During drain, paper should remain dry.
It is advisable to carry out comprehensive repairs with the replacement of the entire bathroom technology.
The toilet is better to install after the completion of finishing works. It is necessary to provide in advance to carry out water supply and sewage pipes. First, the inlet pipe toilet is connected to the sewer. After that, you can fix the drain tank.
The next step is the markup on the floor of the fastening of the toilet bowl. At these points you need to drill holes for fastening bolts. After that, you can fix the product.
Mounting toilet bowl
Then join the coupling output to the sewage, and the hose is supplied to the tank.
It will also be worthwhile to check if the toilet is even installed, there is no leakage in the connection places.
Finishing the ceiling
Some experts recommend to postpone the ceiling finish at the final stage of the bathroom repair. To a greater extent, this concerns various suspended systems. Luminaires can be installed both built-in and hinged. There are still such finishes such as plastic panels or an aluminum profile.
If your budget for repair is limited, you can simply align the ceiling with moisture-resistant putty, cover it with a layer of paint.
Ceiling and wall decoration
Installing a new door
Doors in the bathroom are mounted at the end of the repair work. The requirement for such products comply with the standards of all other interior items of the bathroom. The door block in the bathroom must be moisture-resistant, durable. It is impossible to allow the material from which the door is made is deformed from the temperature difference. When this happens, the door canvas can change in size.
The transformation of his own apartment is the process of fascinating and exhausted. Therefore, when it comes to the bathroom, I want to quickly deal with this question. Especially when the room has small dimensions. In such a situation, the repair of the bathroom turnkey seems to be an ideal solution.
However, the ability to pay services from professionals is not possible, but to have a comfortable place for hygienic procedures is a daily need. Hence the question appears: how to make repairs in the bathroom with your own hands?
To respond to it, it is worth dealing with several components of the process. Namely: cost, designer solution, phased implementation.
Bathroom repair costs
The fact that work will be carried out independently will significantly reduce the estimate. But it will not make it free. The cost of repairing the bathroom depends on the components that are planned to be used, the presence of the necessary tools and the capital performance of the process itself.
If we are talking about the major transformation of the room, with the change of the tie of the floor and the replacement of pipes, the list of components will expand, and the number of instruments needed to work.
Depending on the area of \u200b\u200ball surfaces and preferred material, the purchase of components is carried out. Conditionally, they can be divided into several categories:
- for floor (tile, bulk or wooden floor, cement, sand, grout) - 300-500 rubles / m2;
- for walls (tile, grout, cross patterns and so on.) - 250-400 rubles / m2;
- for ceiling (primer, putty, paint / tile, etc.) - 100-400 rubles / m2;
- plumbing elements (pipes, fittings, toilet, sink, bathroom) - price row depends on the manufacturer and can fluctuate from tens to hundreds of thousand rubles.
The choice of material should be based on the specifics of the room. The tile should have a high level of moisture resistance, have a non-sliding surface (relevant for the floor), the tree must be processed by a special impregnation.
Holding the amount of tiles, it is worth making a stock by 5% of the total in order to be able to replace in case of battle. This is especially important if the selected facing type has an exclusive design and released in limited quantities.
Summing up, the question of how much the repair costs is directly dependent on the preferences of the owner of the apartment.
What to choose the design
An important feature of the bathroom is its functionality. In many dwellings, this room combines a toilet and laundry, and a bathroom.
Therefore, even before the selection of plumbing, it is important to decide on the main idea of \u200b\u200bthe room, answering a couple of questions:
- how many shells and mixers are planned to be installed;
- shower or bathroom;
- type of toilet discharge system;
- the number of sockets and built-in electrical appliances (hand dryers, heated mirrors and so on.).
Laying Communications
Get rid of sticking pipes is not easy. Hold them into the wall will not work, there must be access to such communications. It remains to use polypropylene tubes (the best option for the bathroom) and put them with a single beam under the slope at the wall. Then they will not be visible, and if necessary, the walls do not have to do.
As for electricity, it is important here that the wiring to have reliable protection against moisture. By making a shallow chute in the walls, you can conduct a wire in places designated for outlets and built-in instruments.
Facing surfaces
Bathroom - a room in which there is practically no heating. Careful ventilation of the room only lowers air temperature. Because to keep warm, it is important to take care of the insulation of surfaces.
The ceiling insulation can be carried out by mineral foam (with pre-waterproofing of the material) or glass magnesium sheet. The mount is carried out using mounting glue. When the insulation is fixed, you can start facing.
If the selected type of material is the paint, you will need to pre-install plasterboard plates, which, after treatment, the impregnation is covered with paint, or plastic panels. It is best to choose waterproof brands of laminate or plastic lining.
Floor facing is also carried out by the selected material. Tile should fit without seams. Laminate, boards, or even linoleum, stacked according to the instructions.
The walls of the walls can be carried out both tiles and plastic panels, and even stain in all. The main thing is to comply with the level, to literate the seams on the tile or hide them on the panels.
The installation of plumbing and furniture is carried out when all the cladding is securely fastened with surfaces. After the installation is completed, the last cleaning and connecting communications is carried out.
Stock Foto Beautiful repairs in the bathroom
Photo examples, different layouts and styles for separate bathroom and toilet.
You can appreciate one or another work, pick up a similar design for yourself, as well as learn which of the bathroom repairs put in the gallery is most popular with our visitors.
Main advantage separate bathroom and toilet It is simultaneous and at the same time comfortable use of premises at once with several family members.
It is very relevant in the morning or evening, when the whole family wakes up or comes from work.
After deciding to update the bathroom with the toilet, think about whether to leave the bath or replace it with the shower. Chief plus shower - saving places in the bathroom. This is exactly what they do in the case of an eternal problem "where to shove the washing machine."
If there was no repairs in the bathroom for a long time, then it is worth thinking in which place to install a modern heated towel rail - leave on the site of the old pipe or transfer to a more comfortable place. When transfer, it is most likely not to do without the participation of local locksters, as you have to turn off the riser of hot water, pull the water and digest the pipes.
Photo gallery
Found 84 works
North Butovo Interior decoration of the bathroom and toilet P-44T. Black and white interior. Italian tile Atlas Concorde Marvel Pro 40x80 marble, with mosaic elements
Moscow, ul. Chertanovskaya Reference to the bathroom and toilet in the II-49 series, a bath turn, a washing machine opposite the sink. Belarusian tile belani elise 2
Moscow, ul. Playing Bathroom repair and toilet in Oder P-46, Black and White Collection of Ceramic Tile Ceramin
Moscow, ul. AK. Chelomay Bathroom overhaul is 170x170 and toilet, with dismantling of the atceit walls and the ceiling. Wall decoration under the tile Cabanchik and painting
Moscow, ul. Saltykovskaya 140x170 boaramont and toilet. Layer Santeh / Cabs from the Acetian Sheets. Beige Tile - Walls, Paul
Moscow, Hovrino. Repair bathroom 170x170 and toilet in a two-room apartment, white tile Craram Marazzi 6
Moscow, ul. Holyozerskaya Repair of the bathroom and toilet in a 2-bedroom apartment (Series P-44T-1). Black and White Tile 50x25 April Ceramica Classic
Moscow, ul. Festival Bathroom overhaul of the bathroom and toilet P-44T, shower pallet from mosaic, walls from ITALON MAISON porcelain stoneware. Replacement of sewage riser in the toilet 4
And you can give the bathroom and the toilet one style and make the walls of the walls and floors with one collection. Here is an example of repair in the house P-3.
By inviting our measurer in more detail to discuss technical issues and subtleties of repair, learn all the pros and cons of your layout directly and get several delight tips before repair. We will make a detailed estimate on work and select all the necessary building materials to the beginning of the repair.
Having finished the repair of the bathroom, you will feel wonderful comfort! Which is available in every home. Often the sanitary zone becomes the only place where you can feel alone. Therefore, the desire to make it beautiful, cozy, convenient is characteristic of all bathroom owners. In the arrangement of the bathroom there are several stages. Immediately before starting repairs, the house must be commissioned. This can help an examination of 1-expertiza.ru.
1. Audit: Determine what you possess at this stage: Plumbing, wall cladding, ceiling condition, floor, supply pipes and water drain, supply of electricity, door state.
2. Separate the grains from the Trevel: Decide that the plumbing remains, and what you want to replace. How the walls, gender and ceiling will be lined: where the tile will lie, which is better for the ceiling, which gear is preferable in the bathroom. It requires a replacement of pipes in risers and in the indoor bathroom. What is additionally required in the bathroom, and from what things it is worth getting rid of.
3. Square meters: Measure the room and draw the room diagram. In the drawing, mark the door opening, the output of the electrical wiring, water supply pipes and drain pipes. Enjoy the creation!
4. Creative breakthrough: Tune in to dreams and implement all that I want to see in the bathroom. To do this, use magazines, catalogs, bathroom renovation Photo on the Internet, own pictures. Make a selection of color palette, materials, plumbing models, ceramic tiles or other cladding, furniture - create a collage of your dream bath.
5. Visualization: If you can work in special programs, then create a digital bathroom model in exact sizes or contact a specialist. In the absence of skills to work in editors and the impossibility of contacting a specialist, find something similar to your dream on the Internet. Secure the result with understanding how good will be in the new bathroom.
6. Selection of materials: Armed with a picture with the end result, go to a fascinating shopping trip in search of the required components for repair.
7. Countings and optimization: Count what amount in the aggregate is the cost of all materials, plumbing and add to it at least 30% for unforeseen expenses. They will definitely, after dismantling the old cladding, plumbing, can open additional problems and they will need to be eliminated. If the repair work in the bathroom will make builders brigade, add another 100% to the amount, usually the cost of work is almost the same amount as building materials.
8. Project implementation: At this stage, it remains only to realize repairs in the bathroom. It is worth deciding who will do it. You can always, but it will take more time and strength, you can also contact the specialists. Builders and repairmen will make the required scope of work faster, high quality and sometimes cheaper than independent experiments. It is important to find a good brigade of builders, which includes plumbing, tilenik Wizerovshchik, Electric and specialist in finishing work.
Sequence of work
Dismantling stages
The first thing you need to do is put out the furniture, hinged cabinets, shelves, mirrors, dismantle the shower cabin or partition.
At the next stage, disconnect plumbing from pipes and electricity, if you have a jacuzzi. Remove the chandelier, perhaps it will be useful elsewhere. To illuminate the work field, leave a bright light bulb.
After the removal of all large-sized items, you can remove the facing of all surfaces. This is done using the tool. Do not forget to prevent neighbors about repair and tell them about the timing that you plan to invest in order not to have unnecessary friction. It is also worth remembering that repair work in the bathroom should end at ten o'clock in the evening any day, and on weekends and holidays, noisy work can be carried out no earlier than nine in the morning.
If you plan to transfer the walls or redevelopment of space, make dismantling of partitions, having previously convinced that the demolition of the wall is not carrier.
Creative work
Water and her pipes
Open the risers and determine whether it is worth changing them or with them everything in order and pipes will serve you for many years, at least the next 20 years. It's time to engage in communications of water. If there are several objects for water supply, such as sink, bath, heating column or boiler, then to each point it is necessary to bring a separate pipe. Water fence, in this case, mounted through the collector system. If water filtration is provided, it is embedded at the assembly stage and the water supply system compounds. Provide a system of emergency cutoff water in case of a breakthrough of pipes.
It is worth remembering that the pipe supply of hot water is installed above the pipes with cold water.
Electro-work
Upon completion of work with plumbing systems, debugging, replacing or new electrical wiring installation. In the bathroom, high humidity in the bathroom, therefore, the insulating works are attached to a special meaning. Wires better pull in a plastic protective pipe. Most often, the electrical networks are hidden in the walls, the supply of wires in the case provides not only excellent insulation, but also the possibility of painless replacement if necessary. Sockets and switches are mounted after wall cladding. At the intermediate stage, the insulation of the ends of the wires is required.
a door
Replacing the door is carried out in front of plastering. Install the door frame and jumper door canvas. The door should be secure from pollution by film so that it does not suffer in the process of other construction work. For ventilation, there is a slot with a height of about two centimeters between the door blast and threshold.
Walls
Before facing the wall must be aligned. This stage of construction work is produced either by deficient beacons using plaster mixtures or plasterboard sheets with increased waterproofing. Sheets are attached to a metal frame. Plasterboard and plaster are necessarily ground for better adhesion with subsequent construction mixtures and in order to increase the resistance to a wet environment. Now you can proceed to the final design of the walls, actually to the facing of the selected material.
Ceiling
The easiest way to separate the ceiling is to align and paint. But, the modern building market offers a huge amount of ceiling design options: complex plasterboard structures, followed by the ability to use the ceiling niches for multiple lighting scenarios.
Do not be interesting stretch ceilings. Repair of the bathroom photo in catalogs include a wide variety of velocities of stretch ceilings. They are good because the tension film can be tightened the entire area of \u200b\u200bthe ceiling and there will be no need to align it, plastering and painting. In addition, the film has its aesthetic capabilities: you can apply a picture, select a glossy or matte canvas, also a stretch ceiling has a huge color gamut.
Floor
Outdoor coating will serve, wooden flooring, natural stone and even metal sheets. Before mounting the coating, the floor is thoroughly aligned. It is also important to carefully carry out waterproofing work so that water does not flow into the crack and did not start the mold from the stagnant water.
Repair work is completed by the removal of garbage and cleaning. You get rid of garbage, old rubbish and put in order the surrounding space, because one more important step is to be done: mounted plumbing, mirrors, furniture and decor.
Finishing steps
It's time to mount plumbing. Plumbing establishes depending on the overallity, larger objects are set first. That is, if you have to install a bathroom and a shower, then the first plumbing will become, the one that takes more space.
But there is one preliminary stage: Install the mixer and check the water supply system, as well as drain. If something proceeds, take appropriate measures. After checking, the plumbing and water heating technique is mounted: a boiler or column, bath, toilet, bidet, urinal, and so on, which is provided to equip the bathroom.
Installation of plumbers spend from the furthest angle, in a circle to the door, it helps to place all the plumbing in their places and not damage it when installed.
Accessories and decor
Install heated adolescherWith it, it will be dry not only towels, but also a bathroom room - extra dry warm-up will save from moisture.
At this stage, sockets, switches, lighting plaffers are installed. For sockets, use additional curtains so that the bathroom wet atmosphere does not cause short circuit.
The mirror canvas mounted last, when the main repair work in the bathroom is carried out so that it does not break and damaged. If a locker with a mirror or shelf was planned, then these items hang on the wall during the furnishing of the bathroom.
The sink, mounted in the furniture module, by the type "Moidody", is installed immediately after placing all the plumbing, as it is pretty large-sized furniture.
Pay attention to the trifles, they will revive the room and give her warmth and comfort. A beautiful set of rugs near the bathroom and the toilet will soften the sounds and will ensure a comfortable stay in the bathroom. Provide a couple of sets, so you can change them not only as contaminated, but also depending on the mood or time of the year.
Try to make one - a fascinating creative activity.
Take care of accessories. Cute headset from the holder for brushes, containers for liquid soap or soapbox for bars soap, a tray for the smallest detail, perfectly decorated the room, set the style.
An important detail is the door canvas. If there was no place for the decoration on the walls, decorate the poster, wreath, embroidered picture or photo door.
Wake your fantasy and create your own bathroom design masterpiece.
Repair of the bathroom in the marine style (video)
Bathrooms after repair (50 photos)
