Facing walls with insulation. Facade panels with insulation for outdoor decoration: types of panels, installation features

In recent years, the facades are becoming increasingly popular with decorative thermopadals. The advantage of this decision, in contrast to siding, is that the front panels with the insulation do not require an additional installation of the layer of thermal insulation and the mounting mesh. A huge selection of texture and colors allows you to make a facade of the house in any style, but the most popular is the lifting of buildings under natural natural materials - brick or stone.

Types of thermopanels

Facade panels with insulation for outdoor decoration are seamless solid blocks that are attached directly to the facade of the building. Such thermopanels most often cost from two layers: decorative and layer of heat-insulating material. The average thickness of such products is 6-12 cm. They can be performed on the basis of:

polyurethane foam (PPU);
foamed polystyrene foam;
minvati.

Products of improved design can also have a third hard bottom layer, spike-grooves, built-in fastening elements (metal bedding plates), plastic sleeves for drilling fasteners, etc.

The decorative layer of such panels can be performed from:

facade tile (brick finish) from clinker, porcelain stoneware or glazed ceramics;
compressed marble crumb to imitate stone or marble;
glued-pressed wood chips;
aluminum or professional flooring.

Sometimes the clinker also use marble crumbs for more realistic stamps of seams.

For finishing the corners of the house, angular figured elements are produced, imitating the texture of a stone or bricks, which are chosen under the color of the main wall or, on the contrary, contrast with a shared background.

The metal sandwich panels are essentially a kind of "pie", in the center of which is the insulation, protected from two sides with color aluminum sheets or professional flooring. The professional flooring has a protective film from above, which can be a drawing, imitating natural natural materials - wood, stone, brick, etc.

The advantages and disadvantages of thermopadals

The main advantages of the facade panels with insulation include:

effective heat insulation (polyurethane foam panel with a thickness of 65 mm can successfully replace 180 mm bricks);
high resistance to low temperatures, chemical and mechanical damage and rotting;
fire resistance;
very low moisture absorption coefficient;
low weight - most of the thermopanels for the outer decoration do not provide additional load on the foundation and bearing walls;
simplicity and speed of installation;
the ability to work with the material at any time of the year;
the absence of too time-consuming preparatory work - panels can be fixed even on uneven surfaces on the crate;
long service life;
environmental purity;
the widest range, the ability to choose any kind of decor: you can separate the facade of the house under the brick, stone, tree or imitate any other natural or artificial material.

Many have a higher cost compared to metal or plastic siding. However, the spread of prices from different manufacturers is quite wide, especially since it will not save a lot, since along with siding will need not only additionally acquire the insulation, but also to pay for the installation of each of the layers.

Preparatory work

On the relatively smooth walls of the panel can be mounted without crate. For better fixing dowels, the detachment of the old plaster is removed. Small depressions or chips can be leveled by pads from plywood or with the help of polyurethane foam foam.

With the presence of significant surface drops for rapidly alignment of the walls, you can use the alignment crate.

Such a design will help create an additional ventilated space between the wall and the house. Installing it is easy:

facing is lowered up from the left corner;
around the perimeter of the building strictly horizontally attached the lower aluminum guide;
the drying of dry, impregnated with anti-grapple compositions of bars or metal profiles is attached to the wall vertically using self-tapping screws or dowels;
if there is a base, the base profile is attached to it, which will continue to serve as a support for insulation panels;
to avoid deformation during the swelling of the soil when finishing the base, the lower starting rail is placed above the scene.

FEATURES OF MONTAGE

Installation of any kind of facade thermopanels (including clinker and metal) is made as follows:

Important! Before mounting the first row, for the purpose of sealing and strengthen the wall, the layer of frost-resistant polyurethane foam is stacked. Repeated and after installing each row, as well as in the joints.

Fully filled with foam the resulting cavities before fixing each of the panels of the dowels to avoid deformation of the design should not be.

Installing panels having a groove-comb connection is most simple. They are attached to the groove neighboring on a row of the stove. This mount is stronger and does not form seams and discrepancies in the connection places. If the installation is produced qualitatively, and the grout is selected exactly in color, it is almost impossible to distinguish insulated facade panels for the outer finish of the brick or natural stone.

After the installation is completed, work is carried out on finishing windows and doors with:

decorative plaster, which is applied after a layer of insulation imposed on glue and primed fastener;
clinker tiles or sandwich panels: the order of operation is similar to the previous one, but instead of plastering tile or panel are attached.

With a very detailed instruction on the installation of panels, you can find the video below:

Calculation of the required material

To find out the exact number of panels required for the trim, it is necessary to calculate the total area of \u200b\u200ball walls of the building, to deduct from this value the total area of \u200b\u200bdoor and window openings, and then divide the resulting amount on the area of \u200b\u200bone thermopanel. Since part of the material goes on trimming, it is recommended to purchase them with a reserve of 10-15%.

With the improvement of private buildings and industrial structures, one of the most important stages of work is the external cladding of the walls and the basement. This uses modern finishing materials. They provide a decrease in heat losses, improve appearance, protect against the negative effects of natural factors. Among the wide range of building materials, the decorative facade panels are allocated, the insulation of which are modern thermal insulators with unique properties. Let us dwell on the benefits of applying, the specifics of the installation.

Insulated facade panels for outdoor finish

Applied to external cladding and thermal insulation of various buildings, insulated wall panels are high-tech facing materials that differ in the following properties:

increased thermal insulation characteristics;

attractive appearance;
environmental safety;
long service life.

A foam polystyrene is used as a thermal insulation layer, which leads to the operational characteristics and quality among various materials used for thermal insulation. Polystyetyrol retains properties over the period of operation, fireproof is not subject to the influence of natural factors.

Insulated panels are used for different purposes:

designer decoration of modern cottages;
facing and thermal protection of private houses;
restoration of previously constructed objects;
external improvement of industrial buildings;
facade cladding of public buildings;
thermal insulation of the base part of the buildings.

Constructive features and technology for fastening thermopanels allow them to be installed in various positions:

in a horizontal plane;
on vertically arranged surfaces;
on the grounds that have convexity.

Installation is made on various surfaces made of the following materials:

reinforced concrete;
brick;
woods.

The appearance of the thermopanel imitates various types of finishes:

a natural stone;
ceramic tile;
various types of bricks;
valuable wood varieties.

Different types of thermopadals are used to perform finishing and thermal insulation activities:

metal panels with insulation for the facade;
polyvinyl chloride-based sheet siding;
insulated wood siding;
thermal protective lining under the tile or plaster;
decorative panels based on fiber cement;
insulated elements made of decorative plastic;
casting trim with enhanced thermal insulation.

Due to the low weight, facing thermopanels can be mounted without performing serious surface preparation events. This allows, with low costs, qualitatively change the appearance of the structure without increasing the load on the base of the building and capital walls. A small mass is particularly relevant for buildings, the foundation of which is not capable of perceiving additional loads from the weight of the material used for cladding.

Facade panels with insulation - the main advantages of application

Polyvinyl chloride, fibro-cement, plastic and metal panels with insulation for the facade of the house are the best solution for changing the appearance of the structure, ensuring reliable thermal insulation. The use of modern finishing material is characterized by a variety of advantages, the main of which are:

a significant reduction in the cost of maintaining a comfortable room temperature. The level of costs associated with the heating of the structure decreases to 35%;
reliable protection of the walls and the base of the building from the absorption of moisture. Among the many facing materials, modern thermopanels are distinguished by reduced hygroscopicity;
increased strength characteristics, long-term resource of use and reliability. High-quality facade finish can be operated for more than fifty years;
resistance to external factors. Facing material in conjunction with the heat insulator retain their properties under the influence of ultraviolet, temperature drops and humidity;
lack of negative impact on the health of people. The use of environmentally friendly raw materials ensures the absolute safety of facing elements for others;

fire safety. Materials used for the manufacture of thermopanels retain their characteristics with long-term exposure of elevated temperatures and open fire;
the ability to install on any basis. Installation of thermal insulation elements can be carried out on curvilinear surfaces, as well as bases from various types of building materials;
accelerated and easy installation. There is no need for special preparation of the foundation, which allows you to quickly fulfill finishing and thermal insulation activities;
the ability to perform installation work regardless of climatic conditions. Installation can be carried out in rainy weather, with increased humidity and reduced temperatures;
improved ventilation characteristics. The properties of modern thermopadals and installation technology prevent the formation of condensate, protect the surface from moisture penetration;
lack of cold jumpers. Constructive design and method of installing heat-stash elements prevents the penetration of cold air masses, as well as moisture, destructive wall and base;
effective protection against external noise. The heat insulation layer together with decorative trim provides an increased degree of sound insulation, making it difficult to penetrate the sounds into the room.

High-quality thermal insulation cladding, which has decorative characteristics, is currently enjoyed. After all, it provides the ability to create a favorable microclimate in the room and, at the same time, radically change the visual perception of the building. Due to improved heat insulating characteristics, the payback period of thermopanels is reduced.

Panels with insulation for finishing the base of the house

The base part of the building is a supporting part of the structure that protects the facade from mechanical damage and dirt. Decorative cladding and thermal protection of the base is the most important stage in the thermal insulation of the entire building. That is why it is necessary to pay special attention to the finishing of this part of the structure. A qualitatively completed cladding of the building of the building provides a long service life, wear resistance, helps to maintain a comfortable room temperature.

The basement elements have a number of advantages:

immune to high humidity and precipitation;
resistant to the effects of mechanical factors;
stands to the effects of corrosion processes;
not afraid of temperature differences.

Special panels designed for cladding the base are distinguished by the following characteristics:

a thickness of 4-8 cm;
color execution;
as a textured solution.

Warming with decorative panels produced from wear-resistant, environmentally friendly materials, allows you to securely protect and reflect the base:

prevent the negative impact of external factors on the base of the building;
heat insulating the basis of the structure associated with carriage walls;
significantly improve the aesthetic characteristics of the supporting structure.

For heat shields of the base part apply:

traditional finishing materials for the facade, which have increased strength characteristics;
special facing plates for base, produced in the form of panels imitating natural building raw materials.

Application for facing the supporting structure of the building of the facing panels of darker shades than for the facade piece of the walls, it allows to improve the total aesthetic perception.

Warming with facade panels - installation features

The installation of thermopanels can be carried out only on the planned, pre-prepared base. Therefore, at the initial stage of work, it is necessary to carefully prepare the surface of the walls and the base for fastening the cladding:

remove old plaster;
beat off the existing tile;
strengthen the facade surface with special compositions;
seat cracks, plan irregularities.

Remember that the reliability and strength of the fastening of the external decoration depends on the quality of the basis of the base. Regardless of the applied facing material, further installation work on the finishing of the building of the building are carried out according to a general algorithm:

Make the layout of the location of the thermopanels using a plumb and level.
Note the location of the lower row of the facade elements.
Lock the support profile in the base unit.
Remove the height of the lower veneer tier.
Install vertical strips (lighthouses) in the junction area.
Determine the place of installation of the first element in the left side of the structure.
Treat the mounting foam ground profile.
Prepare the blanks of the necessary dimensions.
Install the lower row of thermal insulation finish.
Drill in the zone of filling holes for fixing.
Secure the facade cladding with the help of special dowels.
Seal polyurethane foam foam cavity and gap.

Laying the remaining rows of finishes in the facade and base part of the structure is performed according to the above technology.

Warming with decorative panels - general recommendations

Events on the insulation of the structure with decorative thermal insulation can be carried out independently. This will significantly save money resources, given the increased cost of thermal insulation elements. However, it is advisable to consult with a specialist who will advise a specific thermal insulation material having the necessary thickness, as well as the corresponding decorative texture.

To quickly execute installation work, follow these activities:

calculate the required number of facade and base thermopadals;
purchase thermal insulation finish corresponding to the calculated area;
purchase a complete set of mounting, challenges, as well as fasteners.

Special attention should be paid for the following points:

the design of the grooves and the ridge fastening, which provides ease of alignment, the absence of gaps, fastening reliability;
the correct adjustment of thermal insulation into the required size using a grinder equipped with a diamond disk;
careful seaming with a facade grout that corresponds to a common color decision;
use of frost-resistant materials that are intended for external work and temperature differences;
the compliance of the base facing of the facade finish, which ensures the optimal aesthetic perception of the entire structure.

By fixing, note that the heatborne can have the finished markup, according to which the drilling holes for the fasteners are carried out. In the absence of ready-made mounting points, you must independently calculate the location of the holes and perform markup.

Let's sum up

Performing insulation with facade panels, you can give the old building to the second life, make it more attractive, reliably maintain heat in the room. The use of heat-shielding elements in the construction of a new structure allows you to save money by combining in the facing material of the insulation and the external finish. It is also attractive to finish, imitating brick walls or stone. In specialized stores it is easy to purchase finishing elements that will correspond to the textual solution and color scheme to your home.

Finishing works on the facade of the building aims to solve several tasks: protection of walls from atmospheric moisture, giving construction of a presentable appearance and insulation of the house.

These works are most effective when the facade panels are used for outdoor finish at home. But most of them, in the presence of excellent protective and aesthetic properties, require substrates from thermal insulation material.

As a result, additional technological operations appear, the deadlines are lengthened and the installation cost increases. In the article we can show the facades of the cottages trimmed with thermoplittes.

Facade panels with insulation helped get rid of this problem. They have a complex structure and consist of two or three functional layers.

The basis of such a panel is the insulation, which is protected from the outside of a solid finishing material. As a result, the process of arrangement of the facade is simplified, and the quality of work does not cause any doubts.

Facade panels made of foamed polyurethane with an external surface pasted are very popular.

They are distinguished by a large variety of design, imitating bricks, various rocks of natural stone and even a tree. The panels are installed with the engagement one for the other.

The high quality of the manufacture of parts makes the joints almost invisible. In polyurethane, sleeves made of plastic or metal to harden the material in the place of attachment to the wall.

Sometimes the inner carrier layer is added. The choice of the thickness of the panel depends on the weather features. In a moderate climate strip, insulated wall panels are used with an insulation thickness of 60-80 mm.

Excellent consumer qualities have thermal fascus panels with an outer layer of. Usually they mimic a stone masonry, giving the building an impressive appearance.

Their protective properties for all types of mechanical, chemical and thermal exposure are excellent all that can.

Insulated facade polystyrene panels with, including marble crumbs of various colors or fine-grained fractions of other rocks, allowed when mounting a smooth seamless surface.

They are easily cutting and fit, quickly installed, have a beautiful view and a small price. They are equally well suited for cladding office buildings and individual cottages.

The facades of the large area with a minimum of architectural elements can be quickly and efficiently.

They are three-layer thermopplits of a large area of \u200b\u200btwo sheets of professional flooring with a layer of mineral wool placed between them, polyurethane foam or polystyrene foam.

Metal galvanized and has additional protection in the form of a colored polymer spraying. The design of the panels and the method of their attachment eliminates moisture from entering the insulation.

According to the same principle, the construction used in frame construction is connounced. But their outer layer consists of oriented chips, which, in addition to high strength, have thermal protection properties.

Wooden rails, bars or galvanized metal profile can be material for it.

The shadow step corresponds to the size of the panels. Their mounting holes should be at the middle of the bar. The profile creates an absolutely smooth vertical plane so that the facing parts are attached without skewing and fuses.

The presence of a frame provides a gap between the main wall and the facing layer ,.

Installation is being taken up and from the corners to the center. If there are special angular parts, they are installed first.

Some types of heat panels provide for the possibility of cutting and fitting the material directly at the work site.

The angular connection of such parts is formed by burning their ends at an angle in 45to. The place of the joint is then closed by an angular bar or rubs on dry weather with special compositions at the end of the installation.

Most decorative products for outdoor use have a hidden fastening. To wooden surfaces and metal profile, insulated wall panels for outer decoration are fastened with self-draws.

For concrete and brick grounds, a dowel-nail will be required. The length of the fasteners is chosen on the basis of the thickness of the insulating layer, taking into account the necessary depth of entering the wall.

For this use enough details or divide whole. The heat panels for the facade are cut with a grinder with the corresponding disk, and the polymer warming layer is a knife.

The result of the correct installation of insulated facade panels will be a beautiful outdoor finish of a dry and warm home. All work will be performed quickly and with noticeable cost savings.

Design of thermopanels

Facade thermopanels consist of two main materials:

insulation (polyurethane foam or basalt plate);
the decorative protective layer (most often the clinker tiles are in this role).

The first is necessary to reduce the heat loss of the walls of the residential house or the construction of any other destination. The second provides an attractive type of building and protects the insulation base from the action of external factors like precipitation, humidity and mechanical effects.

Production technology

The production of external thermopadals is carried out in factory conditions, taking into account modern technologies, allowing the product in the matrix (block form). In the process of manufacture, all the necessary factors are taken into account and only high-quality raw materials are applied. And as a result, high-quality and reliable insulated facade panels are obtained. The main stages of production include:

Preparation of polystyrene foam or polyurethane foam, which consists in foaming material;
Drying granules;
Laying the decorative layer (tiles) in the block shape;
Adding granules in the matrix;
Heating the shape of the hot steam, as a result of which the insulation is expanding, forming a finished panel;
Cooling of the finished panel using a vacuum installation;
Waiting for the panel readiness for several hours (no less than 24).

Product Parameters

An important characteristics that facing thermopanels possesses:

improving the heat and sound insulation properties of external enclosing structures obtained by converting sound energy insulation to thermal;
increase waterproof walls due to the hygroscopicity of the material;
maintaining heat-conducting properties in all conditions;
high resistance to chemical and bacteriological influences. Neither mold, nor fungi or microorganisms do not affect the heat insulation panels.

At the same time, the correct laying of the outer panels provides them with high strength and compression, and to bend. Therefore, they are used not only for construction, but also when repairing the runway on the airfield. Moreover, the plates withstand also the limit levels of temperature - to 150 (some models up to 250) heat degrees and up to 65 degrees of frost. And also have a high degree of fireproof - without fire, their burning continues not more than 4 seconds.

Advantages and disadvantages

The main advantage of thermopanels, which is separated by the facade of the house, is the effective thermal insulation of the building - 50 cm of polyurethane foam replace brickwork with a thickness of 1 meter. At the same time, even after a few years of operation, when the plastered surfaces are already changing the color and tremendous, the heat plane retains both the color and strength, and thermal characteristics. This material does not require any special cleaning, nor special care. Withstanding both weather conditions and mechanical impacts, it will last at least 30 years.

Mount the heatfall is easier than other materials used to finish the house outside. To do this, they are equipped with special fasteners, allowing you to minimize the possibility of damage to the thermopadals during installation. The process of insulation of walls in this way can be called investments in the future, when subsequent savings and repair and repairs are created with minimal time and means.

The owner of the private house, for sure, will suit the advantage of the material as aesthetic appearance. Especially since the wide range of the modern market allows you to choose a panel, the surface of which mimics and brick, and natural stones. Also available materials of different colors. As a result, the trim of the facade increases the uniqueness of the building.

Folding panels with insulation have few:

the possibility of installation only on perfectly smooth enclosing structures. Even small irregularities can lead to panel distortion and reduce its heat-shielding properties;
elevated compared to other materials the cost of both the thermal insulation and its installation. Basically, it is about the same amounts - do not save on installation, since when it is low-quality, the connection of individual elements may disenteced in just a few years;
the formation of condensate under the panels, if between them and the walls of the house do not leave a small gap (at least 4 cm). It is also necessary to take into account the coefficient of parrelproof (the ratio of thickness to vapor permeability) of the enclosing structures, which should be higher than the similar indicator of the insulation.

Installing panels

The installation of thermopanels on the facade of the house is possible under all weather conditions and outdoor temperatures. Due to the special parameters of the material, the climate practically does not affect the quality of its installation. What can not be said about the quality of the walls that must be prepared to pre-prepare, making completely smooth - or choose the installation method on the frame. Special attention during installation of panels is also paid to places of compound, where noticeable seams can form.

Usage of carcass

The installation of heat supplies can be carried out using a frame made of metal structures or sawn timber. It is fixed to metal racks with the help of special clamps that provide invisible mounting. The step between such structures depends on the dimensions of the panels. Typically, this distance is 750-1000 mm.

When choosing a tree, which will also be previously treated with mold and fungi tools, the cross section of individual elements should not exceed 50 mm or in length or width. Otherwise, wood is twisted. The mounting of the panels to wooden structures is carried out with screws with flat hats with a diameter of 10 mm and more or wooden fasteners screwed into spike. The angle of inclination of the fasteners is taken equal to 45 degrees. Mount the frame on the wall surface is recommended using metal corners.

Frameless installation

It is allowed to mount the facing panel directly on the surface of the walls without a frame. If the enclosing structure is smooth, the material is attached using special dowels and self-tapping screws. If there is no irregularities, it is desirable that there are lighthouses in the connecting places. On them there is an alignment of all elements installed outside.

FEATURES OF MONTAGE

Heatopannels for finishing walls outside are mounted so easy that you can use them for the insulation of the facade and the new, and the old house. The panels are able to be attached on any base that has sufficient strength - a cellular concrete, a ceramzite concrete, a brick, a wooden bar or plaster. They do not require a special foundation, no load on top. And using the frame, you can not even worry about the irregularities of the outer walls of the building.
In conclusion, we propose to get acquainted with these video installation of facade panels.

Facade facing thermopanels are presented in the form of special structures that perform two most important tasks - the facade of the house is insulated and are finishing material.

Thermopanel - Facade Decorative Elements

Metal and rustic facade panels have gained well-deserved popularity due to the relatively low cost and high speed of the installation work.

1 Features of facade thermopanel

Immediately it is worth mentioning that the presented metal and rustic facade panels of the Rockwill brand personify themselves the most rational and environmentally friendly solution of the heat-insulating issue.

Before starting the insulation of the outer surface at home, such a product as a facade sandwich panel, it is worth taken into account that it can be compatible with any surface, be it stone or brick.

The insulation of the facade of the house of the Rockvul Sandwich-panels will give the best results if they are fixed on the additional layer of foam.

By the way, in contrast to the foam, Rockvul sandwich panel, stylized under stone or brick significantly improves not only the heat-saving quality of the facade, but also increase its aesthetic appeal.

In addition, the fastening of the rocular sandwich panel to the outer surface of the facade (in contrast to the foam) can be carried out on such surfaces as:

Concrete;
Ceramzite concrete;
Classic brick on;
Plastered facade;
Non-speaking facade;
Block house wall;
Aerated concrete;
Wood;
Unhaired raw brick.

Thermopanels stylized under stone or brick have most positive feedback, which is associated with a certain number of preferred features.

For example, it may be the possibility of insulation with sandwich panels of old buildings. Such products such as rustic thermopanels can be insulated with the facade of the house with a disturbed geometric shape.

With the help of conventional foam plastic, such insulation work is almost impossible. In particularly complex cases, in order to insulate the uneven facade of the house, instead of the polyfoam, the finish is first carried out by a trim, which lines the working surface.

After that, the facade is covered with thermopanels or sandwich panels that can be stylized under stone or brick.

2 Characteristics and properties of thermopadals
When finishing the outer surface of the facade, thermopanels are significantly reduced by the term of the installation work.
In turn, this significantly reduces the total time, which was spent on construction work, and as a result, their cost.
It is known that when conducting construction work, a significant share of expenses is not only a purchase of material and labor, but also rental of scaffolding, with which facade work will be carried out.
The installation of thermopanel does not require the involvement of workers and specialists with high qualifications, because you can perform it with your own hands without any difficulty.
For this, by and large will you need the minimum set of the most common tools. When installing can not do without:
Electric drills;
Building knife;
Hammer;
Screwdrivers like on.

Before you start installing the insulation, you need to make sure that the surface of the walls is smooth and has no significant flaws.
Carnate the front panels can be used with glue, foam for foam or dowels. It is known that the presented panels cost significantly less than the traditional brickwork, because after carrying out simple calculations, you can find out the percentage of funds saving when conducting insulation in this way.
The insulation, presented in the form of thermopadals, fully eliminates the owner from the obligatory need to be associated with the periodic repair of the facade and the restoration of the outer surface of the walls.
However, if the work is performed without compliance with the requirements of the technology, the insulating coating may be subject to deformation.
Presented material has a long operational period, which is equal to more than fifty years, while maintaining the original color.
2.1 Product Reviews
As already mentioned, reviews about facade panels with insulation for most positive.
Paul, 45 years old, Izhevsk:
I recently purchased a country house on the secondary housing market. I decided to make overhaul in it before settling. When it came to the insulation of the facade, I bought and installed Rockvul thermopanel. Great insulation and, moreover, pleases the eye.

Sergey, 50 years old, Kramatorsk:
Recently, an old heating system has become bad to cope with its task. I took up the outside insulation of the facade. As a heater used Rockvul Sandwich Panel. Now in all rooms the optimal temperature. I advise this insulation to everyone.

Vladimir, 43 years old, Zhytomyr:
I am a brigadier of a small building brigade. We work, mainly on private orders. When it comes to the outdoor insulation of the facade of houses, we use Rockvul thermopanels. These products have long proven itself as the best. Customers always remain satisfied, excellent material, we have no complaints to its quality.

2.2 Clinker thermopanels
The presented type of panels as a decorative layer has clinker tiles. If we talk about the degree of resistance to aggressive environmental impact, then the clinker surpasses with its indicators some varieties of natural stone.
This material has a large number of colors and is manufactured using shale clay. Such raw materials are currently mined in northwestern Europe.
This suggests that clinker is an absolutely eco-friendly material that does not contain malicious chemical additives and impurities.
It is created when the method of high-temperature firing is implemented. Clinker panels show high performance of mechanical strength, with an underestimated water absorption.
Such material is distinguished by pronounced frost resistance and the ability to maintain its properties throughout its operational period.
In addition to the fact that the clinker panels exhibit wonderful thermal insulation and aesthetic indicators, they demonstrate high noise insulating qualities.
In addition, the material acts as an additional hydraulic protection as. Such material is applied not only as the insulation and the decorative element of the facade, but also for conducting interior finishing works.
2.3 Thermopanel with porcelain tiles
Cermranite represents another kind of insulating ceramic tile. It is made from high quality raw materials, in the process of roasting, exposure to high temperatures and pressure.
As a result, it turns out very tightly compressed material, which is practically unscrupulous to the malicious effects of the environment.
These indicators greatly exceed natural natural stones. The thermopanels presented are especially quoted by those owners of houses that prefer to accompany the facade, which has a detailed textured surface.
Thermopanels made of porcelain tiles are distinguished by large dimensions, which easily allows them to imitate a stone masonry.
As a rule, these products are used in homes, the appearance of which is focused on Mediterranean or Scandinavian styles. Despite the solid sizes of the plates, they weigh a little, because it allows them to install them with ease with their own hands.
2.4 Thermopanels with glazed tiles
This kind of thermopanel currently is very popular. Especially relevant their application in the process of finishing houses of low-rise type.
The popularity of this material was already seen in the 60s of the last century. The glazed tile is distinguished by a smooth surface and has the heterogeneity of its color scheme, which gives the facade of the house similarity with natural brickwork.
This material is characterized by a good appearance, simplicity when carrying out installation work, high strength characteristics and minimum disadvantages.
2.5 Warming facade using clinker thermopanels (video)

Also on the topic

Codes on GTA San Andreas - full list of cheats!

GTA 5 animal hunting. MAUDE. To get the title Wizard weapons need

GTA 5 Where is the hut with grass

Methods explaining how to install mods on "GTA: San Andreas"

GTA SA codes on weapons. GTA San Andreas codes. Cheat codes for cars, mission. Rosewear levels, attractiveness, gangsters