How to change the color of parquet?
The color of the parquet can be changed by tinting. Parquet tinting (parquet painting) is giving the parquet or parquet board the desired color, shade. Parquet tinting allows you to bring to life any color solutions you propose, giving an individual style to your floor.
Simple ways to tint parquet
In order to make the parquet darker, we use a primer with an “ignition” effect, such as Lobadur HS Prima Seal. If it is necessary to add an amber shade (yellowness) to the parquet, then we use the Lobadur WS Hybrid AT varnish. If for some reason you are not satisfied with this lacquer, you can order a special yellowing additive suitable for any LOBA water-based parquet lacquer. When using these materials, you do not pay extra for parquet tinting.
"Bona create" - stain-free parquet tinting
"Bona Create" is a modern new generation product designed for parquet floor tinting. Slow drying is the main advantage of this composition, which allows you to evenly distribute it without streaks and stains! "Bona Create" is indispensable for tinting parquet on large areas. Is issued in 9 color options. Compatible with water-based parquet varnishes. All colors can be mixed with each other, which gives almost unlimited possibilities in choosing the color of parquet tinting.
Lobadur parquet tinting systems
The tinting systems are presented in ten colors and implemented in three products:
- Lobasol HS 2K ImpactOil Color 2-component oil
- Lobasol Markant Color - a combination of oil and wax
- Lobadur ProColor - solvent based colorant
colored oil
Colored oil is based on natural raw materials and is a combination of oil and wax. It is the most environmentally friendly means for tinting parquet. The parquet board under oil becomes wear-resistant and acquires water-resistant and dirt-repellent properties. All colors can be mixed with each other, which gives almost unlimited possibilities in choosing the color of parquet tinting. Having decided to coat the parquet with oil, it must be borne in mind that replacing it with varnish in the future will be more impossible.
Lobadur ProColor is a professional composition for painting / staining parquet and solid boards with subsequent coating with water-based varnishes. All colors of the colorant can be mixed with each other, for a lighter shade, use Lobadur ProColor colorless. It is recommended to use for tinting large-pored hardwoods (oak, ash). When tinting is applied to finely porous non-ferrous and coniferous species, traces of grinding may clearly appear on the surface, as a result of which the surface may look unevenly colored.
Painting parquet with colored varnish
Colored varnish can be obtained by mixing it with a certain color. The saturation of the color directly depends on the number of layers of applied colored varnish. The more layers, the more intense the color. The advantage of using colored lacquer is that the colorants do not penetrate into the structure of the wood, and you can renew the parquet at any time. During parquet scraping, coloring substances are removed along with the varnish, and your floor is ready for the next design experiments. In order not to resort to parquet recycling, it is necessary to prevent abrasion of the colored varnish layer. To do this, it is necessary to periodically renew the varnish coating by applying a colorless varnish on top. It should be noted such a disadvantage of colored varnishes as the uneven coating at the joints of varnishing strips.
Parquet floor wears out over time and requires major or cosmetic repairs. The easiest and most affordable option is to tint the coating. The procedure allows you to change the color of the floor, update the interior and restore the performance of the parquet.
What is parquet tinting
Parquet tinting is giving the parquet board the natural color of wood or updating the tone of the floor covering while maintaining its structure.
The technology allows you to give the floorboard the character of exotic, expensive woods or get a vintage effect of "aging". With the help of tinting, it will be possible to update the old parquet floor and stylize it under the interior design.
Toning floorboards has a number of significant advantages:
it is possible to process both floorboards and parquet;
improves the appearance of the old coating;
tinting masks minor defects of worn parquet;
allows you to give the room an updated, attractive look, without performing a major overhaul of the premises;
a wide range of colors, allowing you to choose the right shade.
Choice of color for parquet: current trends
Modern wood staining technologies are able to bring to life a variety of colors and shades. Manufacturing companies of coatings have developed affordable complexes for wood processing.
Advice. Samples of painted parquet, as a rule, are presented in hardware stores. When making a choice, you need to have an image of the interior with you in order to match it with the tone of the floor and recreate a complete picture of the situation.
Traditional tinting colors include: shades of gold, dark brown, dark red and amber. More bold options: white, blue, black or rich bright colors.
White color. Such a coating is always in trend, because it is easily combined with different stylistic trends in the interior. The white floor visually enlarges the space; dust and small scratches are not very visible on its surface. Before you tint the parquet in white, it must be carefully prepared and the previous layer of paintwork removed.
Dark tones. Choose dark colors with caution - they are not suitable for every room. It is optimal if the shaded floor is combined with light walls. Toning oak parquet in a dark color helps to hide all the defects of the old flooring. Black and chocolate tones are used in the design of rooms in modern styles: constructivism, minimalism or Scandinavian.
The gray or beige color of the parquet will fill the room with comfort and an atmosphere of tranquility. Such shades harmoniously look in the interiors of Provence, country, Mediterranean direction or neoclassicism. Often pastel colors are chosen when arranging bedrooms and children's rooms.
Red shades make the room "warmer" and cozier. They are recommended for use in classic-style living rooms. However, such parquet requires extreme care in choosing the color of furniture and other surfaces. Red shades are very whimsical to companion colors.
Brown is considered a universal color for flooring. The shade emphasizes the naturalness of the flooring and the structure of the wood. Brown tones are perceived by a person as a symbol of protection and shelter from adversity.
Important! To tint the floor, you must use the compositions of trusted companies. The use of mixtures of unknown brands can spoil the coating, and the parquet will have to be completely torn off.
The better to tint parquet: features of different technologies
There are several ways to change the shade of parquet. For work, stain, oil, varnish or specially designed staining complexes are most often used. The choice of one or another material depends on the desired result and the availability of painting skills. Each method has its pros and cons in terms of applying and operating a floor covering.
Parquet tinting varnish
The use of varnishes with a tinting component allows you to change the color of the parquet by a couple of tones lighter or darker. A ready-made “colored varnish” or a colorless composition with a selected color scheme is suitable for work.
Opening parquet with varnish has the following advantages:
the material does not penetrate into the structure of the wood - if it is necessary to change the color, it is enough to peel off the top layer and repaint the parquet;
in addition to the decorative function, the varnish also performs a protective role, preventing damage to the parquet lamellae;
the ability to control the saturation of the resulting color by the number of layers of varnish.
Among the disadvantages of the "lacquer" tinting include:
quickly enough the layer of varnish is erased in the most passable places;
tinting allows you to achieve only low- and medium-saturated tones - it will not work to convert light wood to black with their help;
the varnish is not resistant to prolonged loads - the coating may begin to crack and peel off.
Important! When applying varnish, it is necessary to adhere to fire and personal safety standards.
Application of parquet oil
For tinting many wood products, including parquet, oil is widely used. The choice of material depends on the type of wood. For the treatment of "exotic" wood, it is necessary to choose a deep-penetrating oil in order to speed up the drying process.
Benefits of oil tinting:
provides reliable protection of the flooring due to the penetration of oil deep into the material;
the ability of parquet to "breathe" - a film does not form on the surface, as after varnishing the floor;
coating stability - does not peel off and does not crack;
a wide range of different colors to choose from;
safety and environmental friendliness of the material.
Oil Disadvantages:
after the initial tinting with oil, it is subsequently impossible to use another type of paintwork materials - the oil solution penetrates deeply into the pores, and it will not be possible to completely remove it;
every six months, the parquet needs to be updated - polishing the coating with a soft cloth made of natural fabrics soaked in a special composition.
Advice. Highly resistant oils are suitable for tinting parquet boards. Materials that have proven themselves well: Arboritec Floor Oil Strong, Classic Base Oil Color and Arboritec Floor Oil Strong.
Oil impregnation is applied to the floor with a brush or brush, and then rubbed with a grinder. After complete drying of the first layer, the surface is treated with the second and third layers.
Features of using stain
The stain completely preserves and conveys the pattern of wood. With the help of stain, it will be possible to achieve color saturation, but the material will not provide protection for the floor covering.
Features of stain application:
The duration of the work. The composition is applied three times. The first and second layers should dry for at least 3 days, and the last - a week. Then the floor is covered with a layer of transparent varnish.
Due to the heterogeneity of the wood structure, the stain may be absorbed unevenly. As a result, dark or light spots form on the parquet.
To achieve uniform staining, the next layer is applied perpendicular to the previous one.
Coloring systems for parquet tinting
LKM manufacturers do not give up trying to create the perfect composition for tinting parquet. The main contender today are special coloring systems based on natural oils. Tinting systems differ from conventional stains in that they absorb more slowly and dry longer. At first glance, this quality may seem like a minus, but it is not.
After applying the usual stain, a few minutes remain to distribute the composition evenly on the floor surface. Not everyone can do it quickly and you have to forget about a good result. Coloring complexes dry within 4-20 hours. This time is enough for uniform processing of even a large parquet area.
Before starting tinting, it is necessary to test the composition on a separate parquet board, since the final result is largely determined by the texture, original color and quality of wood processing.
__________________________________________________
To restore the boards to their original color, renew their appearance and preserve the texture of the wood, the parquet is tinted. There are several options for implementing such a procedure and oil, varnish and stain are more often used. Tinting procedures are simple and you can carry them out yourself.
How to tint parquet?
Updating the coating has a number of advantages: the floor becomes more attractive, minor defects can be masked, and the overall design of the room can also be diversified. Toning, parquet scraping and other similar procedures can be carried out independently, taking into account the basic rules:
- The procedure for giving the desired color to the coating should be carried out at the last stage of construction work, that is, after finishing the walls and ceiling.
- First, pre-treatment is carried out and it is best to contact specialists for this.
- The result of tinting will depend on the material from which the parquet is made.
Oil tinting of parquet
It is a universal substance that gives the parquet a new look. After its application, it will be possible to rub the floor only with special impregnations. Tinted parquet oil can be with wax, one- or two-component. Before using such a tool, you need to make sure that it does not damage the wood. One-component oil is applied in several layers, and the other two options can cover the floor once. The process of tinting parquet is as follows:
- Apply a coat of primer oil to the surface first to improve performance.
- When it dries, the main layer of oil is applied, which should be thick. It is important to move the brush in the direction of the fibers.
- The floor will dry for exactly one day. If after that the color seemed too light, then you can apply another layer.
Parquet tinting varnish
To change the color of the floor, you can use it, which does not penetrate the wood, but creates a film on top. If you want to make the shade more saturated, then you need to apply several layers. It is important to keep in mind that the tinting varnish for parquet is short-lived and after a while it will begin to wear off and crack. The scheme for applying varnish is identical to the instructions presented for oil. After tinting, a layer of colorless varnish should be applied on top.
Toning old parquet
If the coating is already old, then it is recommended to first carry out grinding (sanding). The process is time-consuming and it is better to entrust it to specialists who have the necessary equipment. Parquet scraping with toning is carried out in several stages:
- First, the surface is ground with a coarse, granular abrasive. This removes the old coating layer and existing irregularities.
- To smooth out minor irregularities, medium-grain sandpaper is used.
- To remove traces of previous processing, a fine-grained abrasive is used.
- After that putty is applied - a special resin mixed with wood dust formed during grinding.
- After drying, another grinding is carried out with a fine abrasive. Then a primer is applied, which is selected for the type of wood.
- At the next stage, varnishing and interlayer final grinding are carried out. After removing the dust, the necessary layers of varnish are applied.
Is herringbone parquet tinted?
You can update any parquet and the one that is laid with a herringbone. The methods described above are suitable for tinting, and you can also use stain, which penetrates into the pores of the tree, like oil. It is not suitable for large rooms, as it is absorbed unevenly and the surface may turn out to be spotty. Toning parquet made of beech and other types of wood is carried out as follows:
- It is better to use a roller, which, after wetting, should not be wet, but only damp.
- Distribute the stain evenly over the surface. To avoid stripes, apply the first layer perpendicular to the parquet, and the second - along.
- To get a good result, you need three layers, so the first two should dry for three days, and the last one for at least a week. After that, you can open the floor with varnish.
Parquet tinting - colors
There are several popular color schemes for flooring, which must be selected based on the chosen style of the room. When choosing a color, it is recommended to test it on a part of the parquet flooring to make sure that the shade is suitable.
- White tinted parquet is popular because it is suitable for many design styles. Such a floor will visually enlarge the room.
- If you choose black or another dark color for tinting, then it is important to consider that scratches will be very noticeable on such a coating and the ceiling with walls should be light. Dark shades are best chosen for old parquet to hide existing flaws.
- Toning the parquet in red will give the room comfort and warmth.
- Brown is suitable for almost any design.
- Bright shades should be chosen carefully and only for modern design styles.
Despite the appearance on the construction market of new and even innovative finishing materials that are perfect for decorating the floor surface, the wooden floor does not lose its popularity, or its relevance, or its demand. You can learn how to create a new wooden floor, or restore an old one, or change the color of a parquet or parquet board. on the Parket-all website, which belongs to professionals who know all the subtleties and nuances of working with the most beautiful flooring.
Parquet flooring: about the benefits
Undoubtedly, wood flooring, and parquet flooring in particular, is the most ideal solution for decorating residential interiors. It should be noted that the parquet floor is not only beautiful, it is also extremely warm, and it is very comfortable to walk on it barefoot. True, the wooden floor requires a special attitude towards itself, in particular, you should not use too wet cleaning, you should not walk on it in stiletto heels, you should not move heavy pieces of furniture on its surface.
In addition, it is necessary to carefully monitor the level of humidity in the room, the floor in which is decorated with natural wooden material, without losing sight of the air temperature. Nevertheless, such a reverent attitude to the parquet floor does not cause any trouble for many, and the popularity of parquet in the finishing materials market is a confirmation of this.
How to change the color of a parquet floor
It goes without saying that such work, as well as any other, is best left to professionals who have both knowledge and experience, and are also well versed in stains, which are most often used to change the color of parquet or any other natural wooden coatings. At the moment, stains can be purchased quite simply; they are sold ready-made in specialized stores. Such products are usually harmless to the wood itself and to human health, if you work with them yourself, then only your hands may need protection, and in this capacity simple rubber or latex gloves can be used.
Toning is a way to change the color of a parquet board using special compounds. Ordinary parquet has an unsightly yellow-brown color, which may not be the case in every interior. Modern design trends in the house require a different color of the floors. A dark or, conversely, a light shade of the floor has become fashionable.For example, in a nursery, the floor can be made of carpet to minimize the risk of falls. When visiting a children's clothing store, you can choose comfortable clothes so that they do not restrict the movement of the child and make it possible to feel free in it.
If you are a happy owner of a parquet floor, then you should not change it for something else. Toning allows you to radically change the shade of the parquet to bleached, green and even pink. The special coating does not have covering properties, so the beautiful structure and pattern of natural wood is preserved.
There are several ways to tone. The first is the use of a variety of stains. To work with the stain, the parquet must be refreshed, for this it is polished. The stain is applied to the wood, the intensity of the tone will depend on the number of its layers. You need to know that the stain is applied to the parquet neatly and evenly, otherwise, the color will turn out to be striped. From above, the tinted parquet must be covered with two layers of varnish.
Another way to tint floors would be colored oil. The more layers of oil will be put on the parquet, the more saturated its color will be. A feature of colored oil is its ability to penetrate into the deep layers of wood material, so you can’t put varnish on the tinting, it simply won’t grab the floor.
You can combine the processes of toning and varnishing into one. This can be achieved by using a varnish with tinting properties. The color of the varnish can be chosen to your taste and, if desired, change it, over time, to any other.
- Despite the fact that time and fashion change, there are building materials that are always relevant. These include natural stone products. This is a tree and products from it.
- In the process of long-term operation of the parquet floor, cracks and other mechanical damage may appear in it. This does not mean at all that the parquet is completely damaged and needs to be laid again.
- If there is a parquet floor in the room, it is necessary to monitor its condition. The condition of the parquet floor depends on many factors, which include the right choice of varnish.
- Parquet is considered the most refined, environmentally friendly and practical material for flooring. With proper care, its service life is not tens, but a good hundred years.
- Dozens of feet have walked these floorboards for years. On fairly soft coniferous wood, cracks and potholes formed, various spots appeared, the boards dried out. What to do?