For a modern person who is completely immersed in his work, who pays great attention to commodity-money relations, who experiences stress and depressing anxiety, you just need a little rest. Weekends spent in the countryside can be wonderful fasting days. It is here, communicating with nature, breathing fresh air and getting enough sleep, you will acquire spiritual harmony and a charge of vivacity for the whole working week.
For complete happiness, you just need to get your own house. But which structure is the best to choose? What material will be the most durable, reliable, but at the same time economical and environmentally friendly. It is, of course, a tree! Thanks to modern processing, lumber is able to withstand any load and will serve you faithfully for at least a century.
We bring to your attention a project of a house from a 9x12 timber with a garage and a boiler room, 2 floors, in which we found a combination of elegance and simplicity. The functionality of this structure is quite extensive. Leaving the car in the garage, which is in the plan of the house, we go to the terrace. It is here that you can sunbathe, the main thing is not to overdo it. Come on, we are already met by the hall, from here we can go to the living room, where we will have a little chat and rest. You are hungry? Right behind the wall is the dining room kitchen and the busy hostess is already setting the table. I see you are tired. We go to the second floor, where you can take a bath and settle in one of the three bedrooms.
Isn't it a beautiful home? This is where you can spend your weekends and holidays. Due to the presence of a boiler room, where the heating system will be located, living in the house can be possible at any time of the year.
This project from a 9 × 12 bar is perfect for a whole family of 3-4 people to live in it. Everyone can find a corner for themselves and everyone will be satisfied with it. Lumber material is great for the construction of country houses. So, your design looks great both among the blooming greenery of gardens, and in snow-covered snowdrifts, surrounded by snowmen and sleeping nature.
Basic complete set of the house (including assembly and delivery):
Log house - timber 150x150, 1st and 2nd floors.
All partitions on the 1st and 2nd floor are 100x150 timber.
Floor and ceiling beams - timber 100x150.
Subfloor and ceiling board 25x150.
Roof gables - timber 150x150.
Rafter system-board 50x150.
Roof lathing - board 25x150.
Roof covering with roofing felt.
All consumables (wooden dowels, flax fiber (jute), nails, staples, roofing felt).
Delivery across the Moscow region and assembly at the customer's site.
The cost of a basic set of a log house for a roof with delivery and assembly:
call
Price: settlement
Efficient heating is one of the most important characteristics of any home, therefore Dachny Season is ready to offer services for the design and construction of houses with a boiler room. Our experts are ready to provide you with housing, where you can independently regulate the temperature depending on the weather.
Features of houses with a boiler room
The main feature of a house with a boiler room is the presence of a separate room intended for placing boiler equipment in it. At the same time, the room itself is designed taking into account certain requirements established by regulatory documents. The rest of the layout of a house with a boiler room is no different from ordinary residential cottages. It also has living rooms, a kitchen, a bathroom and other premises.
The presence of a boiler room in a private house gives a number of advantages to its owner:
- Simple maintenance and repair of boiler equipment
- The ability to independently regulate the temperature in the house
- Easy access to all controls of the boiler equipment
It is also worth noting that a boiler room attached to the house or brought out to a separate room provides a higher level of security than when the boiler and other equipment are located directly in the basement or on the basement.
Houses with a boiler room from the "Dachny Season" company
The Dachny Season company offers services for the design and construction of houses with a boiler room. By contacting us, you get the following benefits:
- We carry out turnkey construction of houses
- All houses are guaranteed for a period of 10 years
- Our experts are ready to carry out redevelopment absolutely free
- All types of work are carried out by the company itself
- Our prices are lower than those of competitors in Moscow and the Moscow region
We are ready to develop for you a project of a house with a boiler room, which will take into account all your wishes, as well as the norms established for this kind of structures.
What was done
Project: the Innsbruck project was adapted to the site and the wishes of the customer's family, a solution was proposed to move the terrace.
foundation: based on geology and the architect's calculations, the house was erected on a pile-grillage foundation.
floors: basement - solid concrete; interfloor - reinforced concrete floor slabs.
box: walls made of aerated concrete blocks, laying on masonry glue. Windows are made to order, with one-sided lamination, on-site assembly.
roof: metal tiles.
exterior finish: walls are insulated with basalt facade insulation and plastered, finishing elements are made of wood, made on site, based on TZ-visualization, painted. The base is lined with decorative stone.
interior finishing: finishing was carried out according to the design project, where the combination of decorative plaster with stone and wood was taken as a basis. False beams were installed on the ceilings.
additionally: a fireplace is installed and finished.
What was done
The very case when our Customer and we speak the same language and are inspired by the ECO high-tech style! Designer Ilya came to us with a ready-made Design of his future home! Our team liked the project - after all, such unusual and stylish solutions are always a professional challenge!
We prepared estimates for Ilya and developed unique design solutions - all this allowed us to implement this project! The frame house is made in our proven Canadian technology with 200 mm insulation along the entire contour! Outside, the house is sheathed with imitation timber. All windows are custom-made and laminated in the colors of the project. Additional accents are highlighted by the professional timber imitation dyeing and color matching.
What was done
What does it cost us to build a house? Indeed, having a team of professionals and knowledge - building a house from scratch is a matter of time! But sometimes the task is more difficult! We have introductory - an already existing foundation, or buildings on the site, extensions to existing buildings and much more! For the Matsuev family, it was just such a difficult task. They had a foundation from an old burnt-out house, and a landscaped area around it! The new house had to be built in a short time on the existing foundation. Dmitry and his family had a desire to build a new high-tech house. After careful measurements, a project was made that took into account the old layout, but had a new modern shape with interesting innovations! The house now has an entrance group where you can sit at a table on cozy evenings and a complex but possible exploited roof in our lane. For the implementation of such a roof, we called on our knowledge and modern building materials for LVL beams, welded roofing and much more. Now in the summer on such a roof you can arrange an unusual dinner or watch the stars at night! In the decoration, our architect also emphasized the minimalist and graphic high-tech style. Smooth plastered walls with painted planken detailing, personality added by wood beams at the entrance. Inside, the house is finished with imitation timber, which is painted in different colors depending on the purpose of the room! Large windows in the living room kitchen overlooking the plot - created the desired effect of illumination and airiness of the space! The house of the Matsuev family - decorated our photo gallery in the section of suburban architecture in the high-tech style, in the style chosen by courageous Customers with excellent taste.
What was done
Olga and her family have long dreamed of a country house! A reliable, solid home for life, which will perfectly fit into their difficult narrow area! With the advent of children, it was decided to make the dream come true, children grow up quickly and in their own home in nature there are many opportunities and fresh air. We, in turn, were happy to work on an individual project of a classic-style red brick house with a bay window! After the first acquaintance with our company in a cozy office, we invited Olga to take a look at our existing construction site: evaluate the order and construction processes, storage of materials on the site, get to know the construction team, and make sure of the quality of the work. After visiting the facility, Olga decided to work with us! And we were glad to do our favorite job again to make another country dream come true!
What was done
Project: changes were made to the San Rafael project and redevelopment was made according to the wishes of the Customer.
floors: basement -zhb floor slabs; interfloor - reinforced concrete floor slabs
box: walls made of expanded clay concrete blocks, laying on mortar ??? Windows inserted.
roof: metal tiles
terrace: rough enclosing elements are made, flooring is made.
What was done
Dmitry contacted our company with an interesting draft design to calculate the cost. Our experience allows us to carry out such calculations for draft designs with minimal errors, no more than 2%. Having visited our construction sites and received the construction cost, Dmitry chose us from many of our colleagues in the workshop to complete the project. Our team has embarked on a challenging and expressive countryside project with spacious rooms and a garage, large windows and sophisticated architecture. After the project was completed, Dmitry chose us as a contractor company, and we, in turn, wanted to do further work at the same high level! Since the object is large, Dmitry proposed a phased cooperation, namely, upon successful completion of the foundation work, we proceeded to the second part of the project - walls + ceilings + roof. Also, for Dmitry, the exact timing of construction was important, in order to speed up the construction processes, the team was reinforced with 2 experienced bricklayers.
The box on the pile-grillage foundation was delivered on time! The result pleased us and the customer. All stages of the work were coordinated and worked out for Dmitry and his individual project, from which all participants in the process benefited!
What was done
Project: The project of our company, Inkerman, was changed taking into account the wishes of the Customer's family, the house was planted on the site, taking into account the existing situation on the site and the relief
foundation: based on geology and the architect's calculations, the house was erected on a reinforced pile-grillage foundation.
floors: wooden on wooden beams, in places of large spans, installation of LVL beams. The basement floor is insulated with 200mm basalt insulation; interfloor overlap with noise insulation 150mm.
box: box: walls made of expanded clay concrete blocks, laying on mortar. Windows inserted.
roof: installation of metal tiles.
exterior finish: the facade is insulated with 100 mm basalt facade slabs, the facades are covered with facing bricks; the color scheme was proposed by the architect and agreed with the customer.
What was done
The Krutov family decided to build a spacious house for the whole family!
Olga and other family members went from idea to implementation in several stages! The choice of technology, long work on the project, construction of the foundation, construction of a house with exterior decoration and then work on interior decoration! The frame technology was chosen as energy-saving, pre-fabricated and high-tech! Why did the Krutovs choose our company? They liked the quality of work on our construction site and the workers who gave a detailed excursion! We also worked on the estimate for a long time, combining different options for finishes, comparing their cost. This made it possible to choose the best option from a wide variety of finishing materials and configurations.
The project was created by a friend of the architect, but we had to work out the constructive part of it. After that, the most reliable and effective foundation was erected - the USP. Next, work began on the box. Frame house with 200 mm insulation along the entire contour and a unique roof insulation technology of 300 mm. For the exterior, siding was chosen in a spectacular combination of colors - coffee and cream. The accents are set thanks to the powerful eaves of the roof, the interfloor belt and large windows!
What was done
When you decide to become the happy owner of your own home and move to a new home for permanent residence, first of all you think about what the house will be like; what to build it from; how much will it cost and, most importantly, WHO will do all this?
Alexander, came to our company with the desire to move to his own country house. He liked the Avignon project and there was already a strip foundation on the site. After the initial visit to the site, measurements and examination of the foundation, we gave our conclusions and recommendations. Strengthen the foundation, change and adapt the project to the dimensions of the existing foundation! After agreeing on the cost, it was decided to build in winter. Alexander received as a gift reinforced concrete floors, one of the leading construction teams and a house according to the project he liked, which stood on the site with external finishing by the spring! Alexander watched every stage of construction, regularly visiting the construction site and was pleased with the result, and we were with our work. This is an individually designed Avignon project, realized in stone technology with external insulation and siding!
What was done
Each house is a separate story of creation and implementation! Once we built a house for good people and they recommended us to another good person! Andrey Rumyantsev came to our company with a desire to build a one-story spacious country house with a fireplace for warm family evenings instead of an old country house ... The customer voiced his wishes for finishing - and we, in turn, brought everything to life. Thanks to the detailed visualization of the project, each element of the exterior finish is a member of a friendly ensemble! Bavarian masonry, as the final stage of exterior decoration, looks noble and solid. Without a doubt, such a tandem - aerated concrete and brick can be safely called the best solution in the field of stone housing construction - warm, affordable, beautiful, reliable. Modern technologies have stepped forward so much that such unique configurations become available in a short time, because we built this project during the winter months. The main thing is to have the necessary knowledge and constantly replenish their stock!
What was done
Project: the project of a European company was taken as a basis and was adapted to the site and the wishes of the Customer's family, a terrace and patio were proposed, taking into account the cardinal points of the Customer's site.
foundation: on the basis of geology and the architect's calculations, the house was erected on a pile foundation.
floors: basement - solid concrete; interfloor - wooden on beams with 150 mm soundproofing device.
box: walls made of aerated concrete blocks, laying on masonry glue. Windows are custom made with one-sided lamination, on-site installation.
roof: metal tiles.
exterior finish: walls are insulated with basalt facade insulation and plastered. Based on the visualization, the facade panels under the Tolento stone have been added. The enclosing elements of the terrace, balcony are made of wood, made on site, based on the technical specification visualization, painted. The eaves of the roof are lined with soffits in the color of the roof.
| Vladimir Murashkin, The owner of the house "brought to life according to his idea and sketch!" House parameters: |
What was done
When Customers come to us with bright, modern ideas of the future home, we light up twice! After all, to work on a new stylish project is always interesting and a kind of challenge, how to implement all the bold ideas from a constructive point of view, what materials to use in this case? Vladimir bought a plot with picturesque views of the Oka River! This view could not be ignored, so a dizzying terrace (51.1 m2) and a large balcony, oriented towards beauty, became an indispensable attribute of the future house! Vladimir wanted to have a rest in nature in a wooden house, but it was necessary to build a house in a short time and frame construction technology became an ideal solution for such tasks! If you are to be different, then in everything! The house was made even more spectacular by a vertical finish imitating a timber made of durable larch, painted in natural shades with an emphasized wood texture. Laminated windows complement the modern look of the house! It turned out to be a great country house, with a twist and at the same time incredibly functional.
It all started with an individual project found by the Customer's family on a European website. It was with him that she first came to our office. We made preliminary calculations for the project, took a tour of the existing construction site, shook hands and the work began to boil! The architect improved and adapted the project for the site and the customer's family; the foreman "planted" the house on the site. On the fact of geological surveys, it was decided to put the house on bored piles. The frame has grown in a few weeks, then the roof, insulation, exterior decoration! During the winter period, a house has grown on the site. The customer invited a third-party technical supervision, who monitored the process independently of our multi-stage control. The color of the color scheme for painting imitation of a bar was selected by our manager and here we have a bright and cozy country house of the Pushkov family's dreams!
In a country with such a harsh climate as Russia, high-quality heating of private residential buildings is a matter of not only comfort, but also safety. That is why most people who decide to move from an apartment to a private house take the issue of heating very seriously.
Option for planning a house with a boiler room
Of course, at the planning stage, they are most interested in projects of houses with a boiler room. The room for the boiler room, provided for in the design, usually meets a number of requirements imposed on it by specialists and ordinary users. And every person who orders a project of their future home from a specialized company needs to know about them. In addition, you need to know what stages you will have to go through when designing a house with a boiler room.
It is especially difficult to comply with all the norms if you are ordering a project of a small one-story house with a boiler room. Since in this case it is necessary to comply with safety requirements and not to occupy too much space, otherwise the area of other rooms in the cottage will decrease.
Today, in order to install a heating boiler in your private house, you will have to go through a number of difficult procedures, both technical and legal.
Installation diagram of a heating installation in a two-story house Of course, to start work without knowing about them is simply rash and even stupid. So, what stages is it customary to break down all the work into?
In most cases, going through all these steps is enough for you to be able to install all the necessary heating equipment in your new home.
Where is the best place to locate the boiler room
A heating boiler, even if all the required safety rules are observed, is a source of increased fire hazard. Therefore, the choice of the place where it will be installed should be approached very responsibly and seriously. It is necessary to consider not only the cost of placement and safety of operation, but also the ease of use. Based on this, there are three main ways to locate the boiler room.
The first is outdoor placement. It should be said right away that this method is as costly as it is safe.
Of course, on the one hand, the location of the heating boiler 5-10 meters from the house guarantees that in the event of a gas or diesel fuel leak or an accidental fire of solid fuel, nothing will threaten your house.
But keep in mind that you will have to develop a separate drawing, fill in an additional foundation, think about carrying out external engineering networks and their thermal insulation.
pouring foundations for the boiler room You will have to spend a lot of money and time. And the usability is significantly reduced.
Secondly, if the projects of houses with a boiler room were developed initially taking into account the installation of the necessary equipment, then the heating boiler can be located on the ground floor or even in the basement. Most people prefer to place it in the basement. Then you will not have to allocate 15-16 square meters of usable space on the first floor, which means that the vacated area can be used with greater benefit.
To install a diesel boiler or solid fuel boiler, it is imperative to provide a separate room: when coal, firewood, peat or diesel fuel burns, a large amount of smoke is emitted, which can cause certain problems to the inhabitants of the house. Well, even the most economical owner can allocate 15 square meters, building luxurious two-story houses with a boiler room.
Floor plan of a two-story house with a boiler room If you prefer an electric heating boiler or a not too powerful (no more than 30 kW) gas boiler, then you can install the equipment in the kitchen. Modern equipment is notable for its small dimensions, thanks to which it is not striking and does not take up extra space. If you wish, you can even pick up special wall-mounted boilers, which practically do not take up useful space in the room.
Of course, the kitchen should have high-quality ventilation, and it will never be superfluous to simply monitor the condition of the equipment.
After all, the slightest gas leak is enough to destroy an entire house, along with the people living in it.
And finally, an option that allows you to combine the advantages of the two described above and at the same time, partly get rid of their disadvantages. When wooden houses with a boiler room are designed, a small extension must be foreseen in advance.
Project of a wooden house with a boiler room A foundation is also poured under it, which is part of the main foundation. The extension is in most cases made of lightweight materials (frame construction), which saves a considerable amount during construction. This simplifies the organization of high-quality ventilation. As a result, you get a boiler room, which is located in the immediate vicinity of the house. Thanks to this, you do not have to spend extra money on laying the pipeline.
At any time, you can enter the annex both from the side of the house and from the street: in most cases, extensions are equipped with two doors. If a gas leak (carbon monoxide or explosive) occurs, the risk of serious damage to the main building is minimized. Therefore, an extension to the house allocated for a boiler room can be called the optimal solution.
Additional requirements for the boiler room
Regardless of where you decide to install the heating boiler - in a house, in an annex or in a separate building, the room must meet certain requirements. Moreover, for different types of boilers, the requirements are also different.
For example, if you are building a frame house with a gas boiler room, then the area of the boiler room should be at least 15 meters with a height of 2.2 meters. However, this only applies to heating boilers with a capacity of no more than 30 kW. If you use a boiler with a capacity of 30 to 150 kW, then the ceiling height should be at least 2.5 meters. Also note that you cannot store a gas tank (be it cylinders or another container) in the same room with the boiler, in order to avoid a fire and a terrible explosion.
For boiler rooms with solid fuel boilers, the area can be reduced to 7 square meters, and you can choose the height that seems sufficient to you.
If you are using a hinged boiler, then make sure that the boiler room scheme provides for one wall, built of non-combustible material (brick or concrete). When choosing a heavier floor-standing boiler, make sure that the foundation of the boiler room can withstand such a significant load. Of course, the floor must have a completely non-combustible coating. When creating a heating system in an annex or on the street, it would be better to fill the floor with concrete. If you are installing the boiler indoors, it will be enough to put a sheet of steel of sufficient thickness on the floor.
You should not save on component parts. Yes, buying high-quality smoke detectors, bypasses, shut-off valves and other equipment in a specialized store, and not in the market, you will spend several hundred or even thousand rubles more. However, in this case, you will be sure that each part is made of high quality materials, and not brittle alloys that cannot withstand significant pressure and frequent temperature changes.
Connection diagram for a solid fuel boiler in a boiler room This means that you guarantee the safety of yourself, your loved ones and your property. Isn't it worth the extra thousand rubles spent? In some cases, it is necessary to bring a sewer drain to the boiler room. Condensation will drain there, which, under certain circumstances, arises in the chimney of the heating boiler.
In general, the layout of a house with a boiler room consists of many calculations, complicated by the fact that it is necessary to take into account every little thing.
After all, it is important not only to correctly calculate the power of the installed boiler, but also to select the appropriate equipment based on the size of the premises, the thickness of the walls, the area of the windows, the strength and direction of the wind in the region, the temperature (average for winter and extremely low). Therefore, most people prefer not to even try to draw up a plan on their own, entrusting this extremely difficult and responsible work to specialists.
Yes, because of this, the already expensive operation of installing a heating boiler turns into the most expensive of all procedures for installing engineering systems. But you can be sure that nothing threatens your family and you personally. And that even on the coldest winter days, when a blizzard is howling outside the window, you will be warm and feel really comfortable.
Houses from a bar with a boiler room are created for winter use. The presence of a special furnace room indicates that this is a good project, specially prepared for year-round living.
The boiler room can be located both in a one-story cottage and on the basement floor. It depends on the wishes of the customer, the chosen project and the preferred heating system.
Where should the boiler room be located?
In most layouts of country cottages, the furnace is located on the ground floor. This is due to the fact that the lion's share of thermal heating schemes involves a reinforced circuit on the ground floor. The second floor is not heated so intensively, and is often completely devoid of heating.
A properly designed boiler room must meet all technical requirements, and be responsible not only for heating, but also for heating water.
Often, a bathroom and a toilet are located near the combustion room in order to provide a strong pressure of water.
What should be placed in the boiler room?
When ordering a turnkey building, you need to understand which units and devices should be in the furnace. The optimal list looks like this:
- Boilers.
They can work on coal, gas, wood briquettes and biofuels. For heating a cottage from a profiled bar, both mono-boilers (operate on one type of fuel) and combined solutions are suitable. They are capable of processing several different energy sources.
- Devices for heating running water.
These are usually electric boilers. Less often, gas water heaters of various capacities.
- Capacity for water.
A large tank in which heated water accumulates. Usually its capacity does not exceed 150-200 liters. This is enough for 2-3 people during the day. The water in such a container can remain hot for a long time.
In addition, filters for coarse water purification, hydraulic separators, various piping elements, shut-off valves and an electrical panel are installed in the furnace.