How to make a 100% slime. How to make a slime for games at home

Reading time: 9 min

Today, probably everyone has heard about this funny toy. For millions of children, an interesting multi-colored chewing gum is one of the most favorite toys. As it turned out, making a slime at home with your own hands is quite simple.

You need to figure out what a slime is, and consider a certain number of options on how to make slime houses, on your own with your own hands.

What is "Lizun"

Slime - so Lizun was originally called. The creators of the toy are Mattel. Date of birth of the toy - 1976. They began to call the toy Lizun in the 90s of the twentieth century, when the cartoon "Ghostbusters" was released on the screens. One of the cartoon characters was Lizun (ghost).

He was too similar to Slime: the same green, easily passed through the walls. And on the surface, after it, there was a sticky mucus, a greenish tint.

One to one, just like Slime, slime is a soft jelly-like substance that can easily change shape, but does not melt in the hands. It can be both hard and elastic, if there is a sharp or strong impact, it sticks to the surface of the ceiling, flows down the wall, leaving an unattractive mark after itself. If there is a desire, the toy can take on a variety of forms.

When the child has played enough, the toy is placed in a jar. If stored, in compliance with the rules, for a long time it can be used.

According to psychologists, the Lizun toy is a wonderful anti-stress. With its help, the baby can relax. His imagination will be busy. The child will grow up with a good imagination. In addition, with the help of Slime, motor skills, motor activity begin to develop perfectly, and the nervous system strengthens. There is a training of memory, vision, attention.

Lizun is great entertainment for kids.

Children not only have fun playing with slime, but also get rid of stress. The nervous system receives a beneficial effect. The small muscles of the hand, during the game, develop well, as well as motor skills.

The toy has a gel consistency. It cannot melt, but can take the most unexpected form.

In every store that sells toys for children, you can buy slimes. But you can make this toy yourself at home. Why not do it with your child? It's not difficult at all.

This process will not take much time. Here, too expensive materials and tools are not needed. It is worth considering those options that are affordable and interesting to make this interesting toy.

How to make a slime with your own hands at home

The easiest way: starch slime

This recipe is simple and safe. This result is achieved because there is no boric acid, glue and detergents. If you make a slime using starch, the process steps will be simple. All actions are easy to do for both a child and an adult.

What you need (materials):

• potato starch (150 g);
• warm water (75 ml);
• food coloring (2.5 g);
• You need to prepare a bowl and a spoon to mix the ingredients.

Step by step instruction:

1. Pour starch into a bowl.
2. Add dye. Mix it with starch.
3. Slowly pour in the water, while stirring the composition.

At first glance, at first, it will seem that the slime did not work out, and this is a simple jelly. But when the stirring is prolonged, it will be seen how the liquid has become an elastic slurry.

Lizun, which is completely safe, can be played with. For a child, usually, the resulting toy is of interest for the first two days.

Then you have to do everything again, in accordance with the recipe, to get a new slime.

Sparkling slime made of PVA glue with glitter

To make slime using glitter, you need to have on hand:

• glue that contains glitter (100 ml);
• water (250 ml);
• borax (1 tsp);
• water (1 tablespoon)

Pour water into a glass. Stir, in it, borax. Pour glitter glue into a bowl. All. Here you need 1 tablespoon of water. It is poured into a bowl of glue.

Mix well so that the mass becomes flexible and pliable. After that, a solution of borax is introduced, and kneaded to the required consistency to make Lizun.

Slime without sodium tetraborate and without glue with detergent

In the event that going to the pharmacy is not in the plans, and you want to make Lizun right now, this option is more suitable than others.

The manufactured Lizun, outwardly, is almost indistinguishable from the purchased one. Since the manufacture of this type of slime requires the use of detergent, you will need to wash your hands thoroughly.

Need to take:

• dishwashing liquid
• bowl for mixing ingredients
• hand cream
• dye.

How to do:
In a ratio of 1: 2, you need to combine dishwashing detergent with soda. Mix everything well.
Add hand cream. Mix the mass. How much glue is needed will be seen when the ingredients are mixed.
Pour in the dye.

Once all of these components are mixed, you should pay attention to the mass. It should be slightly runny.
Slime, which is not yet 100% ready, should fall asleep in a bag. Then, for 4 hours, send to the refrigerator. As time passes, they pull out a toy and have fun with it.

How to make slime from shampoo

A funny slime can be obtained if you use an ordinary shampoo, add dyes and polymer glue (Titan is great)
Shampoo (100 ml) is poured into the container.
Pour in food coloring (1 tsp).
Stir.
4 tablespoons of glue are combined with colored shampoo.

The resulting liquid mass is poured into a bag, and wrinkled by hand to obtain the required density.
They pull out the substance that turned out. Everything! Slime from shampoo for children is ready. Put in a container with a lid to keep the toy there.

The most harmless - from wheat flour

If you take flour, the fun for the kids will be absolutely harmless. What to do?

• Sift 2 tablespoons of flour through a sieve.
• Pour 50 ml of cold water on top.
• Then 50 ml hot (boiling water should not be used).

• Mix the ingredients to get a uniform consistency.
• Pour in food coloring (3-5 drops).

• If desired, add salt or sugar.
• Mix the dough until the whole mass acquires one shade.
• Place in refrigerator for 3 hours.

• Take out.
• They knead with their hands.

Lizun from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But what fun it is to make this toy! Only, so that the result does not disappoint, you should not “depart” from the recipe.

Need to stock up:

• polyvinyl alcohol;
• water;
• Sodium tetraborate (brown);
• Dyes (if desired).

It is not a problem to buy a borax in a pharmacy. It is sold without requiring a prescription. The price of the funds is low. It should be noted that polyvinyl alcohol is sold as a powder, not a liquid. This ingredient is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol is suitable.

What to do:
Pour polyvinyl alcohol into a bowl (a little). Mix. Put on fire. Cook for 40 minutes. In this case, it is necessary to stir all the time. To prevent the mass from burning, the fire is made weak. After the bowl is removed from the heat, the mass should cool.

Preferably at room temperature. When the alcohol was allowed to cool, at this time the other components are mixed. Water is poured into a glass.

Pour in 1 or 2 tablespoons of sodium tetraborate. Everything is thoroughly mixed until the borax crystals are completely dissolved in the water.

After that, the liquid that has turned out must be filtered. Add alcohol (it will have cooled down by this time), in a ratio of 1:3. Mix well. If desired, add food coloring. You can use the toy!

Colored slime made of glue and borax with water

This method has gained popularity. A lot of different ways have been devised. And what only ingredients are not used! One of the methods can be considered in detail.

Have to take:

• warm water (200 ml);
• a jar of PVA glue (or two);
• food coloring;
• borax (2 bottles).

Shake the tube of glue before starting to work. Then it is poured into a deep bowl. (You can also use an ordinary glass jar.)

You will need another bowl. There they mix water with dye, and pour it into a jar of PVA. Until a homogeneous mass is obtained, all components are mixed.

After that, boric acid should “go” into the mass containing glue. As a result, it will be seen how the mixture becomes viscous and dense, in consistency. After the viscosity appeared, and the mass became thick.

It must be kneaded by wearing gloves. If they are not at hand, then they are mixed in a plastic bag. The resulting slime is laid out on a leaf, for half an hour or an hour. Everything. The child can play.

How to make from plasticine with gelatin

Plasticine, as a rule, is in those houses where children live. It is this material that will come in handy to make a popular toy. Everyone will be happy with the result!

What will have to be prepared from materials and tools:

• 1 pack of plasticine;
• 1 pack of edible gelatin;
• a spatula to mix the ingredients (or a spoon);
• jar or bowl for mixing;
• iron bowl to heat gelatin.

How to do:
First, pour gelatin into a bowl of iron. Fill with cold water. Mix thoroughly. Leave for 60 minutes. As time passes, you need to heat the gelatin that has been soaked. Bring to a boil, and immediately set aside the container, removing it from the heat.

You need to take a container (better - plastic). Using a spatula, mix water (50g) with plasticine (100g).
In the resulting mixture, slowly, you need to pour the gelatin, which is already prepared. Mix with a spatula to get a plastic, homogeneous mass.

The bowl with the mass is placed on the shelf of the refrigerator so that the product is completely frozen. After that, you can get and give the child a slime.

Slime made from perfume and hand cream

If you take a hand cream, you can get a slime. But there is no 100% guarantee. But why not take a chance?

• Squeeze cream into a bowl.
• Add dye. Stir.
• Spirits are added little by little. The resulting mixture is stirred. She should start to thicken.
• As soon as the desired consistency is obtained, the toy is kneaded with hands.

funny transparent slime

To make such a toy, there will be no difficulties. For its manufacture, you need to prepare the following components and materials:

• Transparent PVA glue (100 ml). It is sold in stationery stores.
• Boric acid, in powder form (1 tablespoon);
• A bowl for mixing the ingredients;
• Wooden stick or spoon.

Step-by-step instructions for making at home:

1. Pour glue into a glass jar.
2. Send boric powder there.
3. Mix thoroughly so that a homogeneous elastic liquid is obtained.

Everything. Slime can be played with. Only the child needs to be told that they will need to wash their hands with soap after the game.

simple toothpaste slime

What you need to have to make this toy:

• Tube of toothpaste.
• Cup.
• Food dye.

Step by step instructions for making slime at home:
Squeeze a tube of toothpaste into a glass. It is advisable to buy either a gel or a thick consistency paste. Send dye into a glass. If you add more of this component, the shade of the slime will turn out to be saturated.

To get a homogeneous mass, you need to thoroughly knead the mixture. It is necessary to watch that all the grains of the dye dissolve.

As soon as a homogeneous mixture is obtained, it is necessary to send it to a water bath for 15 minutes. This is quite enough. You need to do this to eliminate excess moisture. As a result, the mass will acquire a dense structure.

Care must be taken to ensure that the slime does not turn out to be very dry. To prevent this from happening, it is advisable to smear your hands with oil and knead the toy. The size of the slime will depend on the amount of toothpaste used.

Lizun soap and toothpaste

To make a toy, you need to stock up:

• toothpaste
• liquid soap;
• dry dye;
• flour.

Step-by-step instruction:

Soap and toothpaste are mixed in a 1:1 ratio.

Mix the dye with flour. When flour is added, it is necessary to mix the mixture, without stopping. If you take soap and paste, in the amount of 20 g (of each component), then 5 tsp of flour is enough.

When all the flour is poured out, the whole mass is thoroughly mixed so that the dough does not acquire a uniform structure.
It is advisable to pour a little water. Then the mass is kneaded until the slime becomes viscous.

Easy way to make slime with hydrogen peroxide

Since the cost of making such a toy is low, this method has become very popular. But some people are disappointed because they were hoping for a different result. According to this recipe, the toy will turn out to be hard, but it will jump well.

You will need:

• 1 glass of water;
• 100 g of starch or soda;
• 100 g of PVA glue;
• hydrogen peroxide;
• dye.

You need to have a medium sized container. There it will be necessary to mix water with soda (or starch), in equal proportions. It is necessary to get a jelly-like state of the mass. Then you need to pour in the glue. Mix well.

Hydrogen peroxide must be poured into this mass. Add dye. Mix again. It should be noted that the slime, as a result, becomes airy precisely because of hydrogen peroxide. If it became clear that the mass is too thick, it is necessary to change the proportions by adding more water.

Slime, using washing powder

To make such a slime, you will need to use a liquid analogue of washing powder. No need to try using gel or liquid soap. The toy will not work, because the consistency will be different.

Before you start manufacturing, you must have:

• PVA glue;
• liquid washing powder;
• food coloring;
• thin rubber gloves;
• container.

Manufacturing steps:

Pour PVA glue (1 cup) into the prepared bowl. You can add more, or you can use less. It will depend on what size you want to make the slime.

Drop 5-6 drops of food coloring into PVA. Stir until the mixture has a uniform color.

Take 2 tbsp. liquid laundry detergent. Pour into mixture. Mix the solution well. You will see how, over time, it becomes sticky. It is necessary to bring the solution to the state of putty. If the solution is too thick. Drop by drop, liquid powder should be added to dilute the mass.

Put on gloves. Remove the solution from the bowl and start kneading it like dough. It is necessary to get rid of excess drops of powder.

If this is not done, the slime will be similar in consistency to soft rubber.

The toy must be stored in a closed container. When it became clear that the toy was losing its properties, it should be put in the refrigerator for three to four hours.

How to make slime from magnets

The magnetic slime is considered an original toy. He will be able to emit a glow in the dark. You can make such a toy yourself at home.

• Neodymium magnets;
• boron;
• water;
• glue;
• iron oxide.

Pour 1 glass of water into the bowl. Add 0.5 tsp. burs. Mix well to completely dissolve the boron in the water. You will need a mixture to activate the second half of the composition.

Pour 1 cup of water into another bowl. Add glue (30g). Mix well. Pour in the paint. In order for the slime to please with a glow in the dark, it is desirable that phosphor paint be used.

In the mixture where the glue is poured, gradually, a solution of boron. In this case, all the time it is necessary to mix the adhesive mixture. At that moment, when the mixture begins to harden and acquire the desired consistency, the boron solution does not need to be added. What's left is poured out.

The slime that will turn out must be leveled on the table, or board. Iron oxide is poured into the center of the toy (a little bit). Knead the slime until it is all gray.

The magnetic toy is ready. When the slime comes into contact with the magnet, it will crawl after it.

DIY shaving foam slime

As is clear from the title, the main component in the manufacture of the toy will be shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

• Shaving foam (150 g);
• 100 ml of PVA glue;
• Medium bowl;
• Spoon for mixing components;

How to make slime at home from men's shaving foam:

Pour glue into a container.
There, gradually pour in the foam. The key word is "gradually".

When the slime has become viscous and elastic, this indicates that enough foam has been added. That is why 150 g is a rough guideline. The person who makes the slime must take control of the amount of foam.

The components are mixed until a ball is formed, the structure of which is dense. It shouldn't stick to your hands.

Then the slurry is crushed until the structure becomes elastic. If the slime is mixed well, it will not stick to your hands.
If you want the toy to be bright and beautiful, add food coloring during the manufacturing process.

What to do if the slime did not work out

In the event that the slime failed to do so. As intended, all errors are easily corrected.

1. To give the toy elasticity, you need to add a few drops of vinegar. Then it will stretch better
   If you add a few drops of hydrogen peroxide, the mass will turn out more magnificent. Usually, this is done when making fluffy slime.
2. To make the slime slippery, you need to apply glycerin.
3. A luminous toy is made using fluorescent paint.
4. When the slime turned out to be very soft, they put it in a jar, pour a little salt on top. Close the lid. So the toy should stand all night. The toy will become elastic, as the salt will absorb excess moisture.
5. When the slime turned out to be hard, you can soften the structure if you put a slime in a jar, and after adding water, leave it overnight, under the lid.
6. To give the toy a pleasant aroma, it is advisable to use essential oil, vanillin or food flavoring.
7. When adding the smallest sawdust or iron oxide, you get a magnetic slime. The toy must be kneaded well for even distribution of the additive. As a result, the toy will reach for any magnets.
8. An "anti-stress toy" will turn out if the mucus is in a balloon. Do this using a large syringe without a needle.
9. In order to make the slime larger in size, it is placed in a bowl of water for 3 hours. Do not worry if it breaks into several parts. All according to the rules. You need to add a little cream for the body or hands and salt. Mix. The slime will become elastic and increase in size.

On a note! You can add foam balls of different colors to the toy. This will not only increase the size of the slime, but also make it brighter.

Lizun care rules

The toy, from which both children and adults are delighted, sticks to surfaces and leaves no traces, after itself - this is the famous slime. It can be compared to thick jelly or jelly.

Make it using a jelly-like material. That is why, over time, it ceases to be elastic and attractive.

If you know the rules for caring for a slime, you can extend its life. It is necessary that the toy be “tidy”. To make it fun to play with.

Where to store

For the slime, it is necessary to allocate a separate container in which there is a lid. Store it on one of the shelves of the refrigerator. Storage in the freezer is excluded.

How to care for slime

The main thing to adhere to is to ensure that the slime is not dirty. Slime has sticky properties, so small particles of debris easily stick to it. It is desirable that the toys were not in those places where there is dust.

For example, dust accumulates under the sofa. Do not allow the slime to come into contact with surfaces covered with pile. In case of contamination of the slime, the garbage is removed using alcohol. The second option is to remove it carefully using tweezers or a needle. You can remove debris with your finger, if possible.

Lizun "does not like" if the air in the room is too dry, or vice versa - very humid. If the room is dry, it can become hard and lose its sticky properties. And if there is excess moisture, it swells and becomes more humid.

How to act in such a situation? What to do so that the shape of the toy is not deformed? If there is little moisture, the slime will dry out. It is necessary to save him, if in his "apartment" (container), pour a little water (5-7 drops). The slime will absorb moisture. This will help him recover.

If suddenly the toy has become watery, due to excess moisture, the use of ordinary table salt can help. Pour a few grains of salt into the container. Cover with a lid on top. In the air, the "house" is shaken.

In order for the slime to grow, a few drops of water are poured into the container overnight. Close the lid. Put on the shelf of the refrigerator. You can not store a toy in the freezer, otherwise the slime will be covered with frost.

When the toy has not been played for a long time, it may become moldy. If mold has been found, it is advisable to discard the slime.

Video: how to store Lizun

Lizun (Slime) is a toy that you don’t want to let go of. The jelly-like material, similar to mucus, helps not only the development of fine motor skills in children, but also the fight against stress in adults. Slime was originally made by Matte using guar gum and borax. Over time, the slime manufacturing recipe expanded: some components were replaced by others, making it the most accessible.

Preparing jelly-like anti-stress is a creative and interesting process. It doesn't take long and doesn't require a lot of ingredients. Following all the rules, the creation of a slime will not take more than 5 minutes.

Show all

The easiest way to make slime #1

You can prepare a jelly-like toy using soda and dishwashing liquid. These ingredients are easy to find in every home. But when working with them, you must remember that children need to play with such a slime only in the presence of adults.



• baking soda;
• detergent for dishes;
• water;
• food coloring or paint (preferably gouache).

Cooking method:

1. 1. Pour detergent into a glass bowl. The dosage is arbitrary. As the rest of the ingredients are added, it will be possible to focus on the resulting consistency by diluting the future slime with water or dishwashing detergent.
2. 2. Add baking soda to the detergent and mix everything thoroughly. If the mixture turns out to be thick, then it can be thinned with other components until the desired consistency is obtained.
3. 3. When the slime is ready, to give it a bright color, you can add dye or gouache to it and mix well again until fully cooked.



A jelly-like toy can also be made from ordinary toothpaste.

The easiest way to make slime #2

Shampoo and shower gel are only 2 components that are needed to make a slime.



You need to store such a slime at low temperatures, so after the games you need to put it in a container and place it in a refrigerator. Expiration date - 30 days.

Cooking method:

1. 1. To make a slime toy, you need to mix two components in equal proportions in a container. It is worth paying attention to the fact that granules and other additives should not be contained in either the gel or the shampoo. Otherwise, the slime will not be transparent.
2. 2. All ingredients must be thoroughly mixed, then sent to cool and reach the desired consistency in the refrigerator. After 12-20 hours, the jelly-like slime will be ready for use.



You can make slime not only from dish detergent, but also from powder. The manufacturing process can be seen in the video.

The easiest way to make slime #3

Slime can also be made from safe ingredients, which are based on ordinary baking flour. Even small children can play with a flour jelly toy.

Cooking materials:

• baking flour;
• cold water;
• hot water;
• food coloring or natural coloring (beet juice, carrot juice, etc.).

Cooking method:



1. 1. Pour 300-400 grams of pre-sifted flour into a small container.
2. 2. Pour 50 ml of cold water into the flour, then add 50 ml of warm water. Do not pour very hot water. After boiling water, you need to give it time to cool down a bit.
3. 3. All ingredients must be mixed well to obtain a homogeneous mass without lumps. After that, you can add a little dye to the resulting mixture, mix everything well, and send the resulting sticky consistency to the refrigerator for 5-6 hours.
4. 4. After the time has elapsed, you can take the flour slime out of the refrigerator and let the children play.



Slime can also be made from salt and shampoo. An easy way to cook can be seen in the video.

The easiest way to make slime #4

You can easily make an anti-stress toy from PVA glue and sodium tetraborate powder or solution. This manufacturing method is the most popular, since the slime prepared according to this recipe is very similar to the store version.

Cooking materials:

How to make a slime - 10 ways to make at home

4.4 (88.89%) 540 votes

Lots of kids love slime play - easy fun for all ages. Slime toys became popular after the release of a cartoon about the adventures of ghost hunters, one of whose characters was Slimer, a constantly changing shape, spreading and stretching strange creature. Another name for this toy is handgam. How to make a slime at home, we will learn today

Lizun is great fun for kids

Slime is not only a great entertainment for children, but also helps to relieve stress, has a beneficial effect on the nervous system, and helps develop small hand muscles and motor skills. The toy has a gel-like consistency, does not melt and can take the most bizarre shapes. You can buy a slime in any children's toy store, but it's not difficult to make it yourself or with the help of a child at home. Making a slime does not take much time and does not require the availability or purchase of expensive materials and tools. Consider affordable and not very complicated options for creating this interesting toy.

How to make slime at home

If there are children in the house, there will definitely be plasticine. Use it to make a popular toy - the result will impress!

• plasticine - 1 pack:
• food gelatin - 1 pack;
• spatula (spoon) for mixing components;
• container (bowl, jar) for kneading;
• iron container for heating gelatin.

Cooking method:

1. Pour gelatin into an iron container and fill it with cold water. Mix thoroughly and leave for an hour. After the specified time has elapsed, heat the soaked gelatin, bring to a boil and quickly remove the dishes from the stove.
2. We take a container for kneading (it is better if it is plastic) and, using a spatula, knead soft plasticine (100 g) very well with water (50 ml).
3. Carefully pour the prepared gelatin into the resulting plasticine mixture, mix with a spatula until a homogeneous, plastic mass is formed.
4. Place the container with the resulting mass in the refrigerator and wait for complete solidification.
5. We take it out of the refrigerator and use it for its intended purpose!

Video on how to make slime from plasticine

This method is a godsend for those parents who, when choosing toys, first of all put in the first place the maximum safety, complete environmental friendliness of materials for manufacturing. This option is also ideal for the smallest fans of games with slime.

Required materials and tools:

• warm water;
• starch (potato or any other);
• container for mixing components.

Cooking method:

1. In the prepared container we place warm water and prepared starch in equal proportions.
2. If we want to get a multi-colored toy, we add a small amount of food coloring, brilliant green, potassium permanganate solution or other coloring substances that are safe for children.
3. Thoroughly knead the mass until it becomes plastic and elastic. It is better to knead with gloves to prevent staining of hands.

Such a slime will stick perfectly to surfaces of any type, but it also has a drawback - it is not able to bounce and spring. So, before manufacturing, it is better to ask the future user whether the characteristics and capabilities of an environmentally friendly starch slime will suit him.

Has the house been recently renovated and do you have leftover construction adhesive? With the help of the available components, we will turn them into a toy for the kids!

Required materials and tools:

• shampoo;
• construction glue ("Titan", "Ecolux" or other);
• food coloring;
• thick plastic bag;
• container for mixing components (plastic bowl):
• spatula or mixing stick.

Cooking method:

1. Pour a small amount of shampoo into the prepared container.
2. Pour building glue into the shampoo - there should be more of it than shampoo.
3. Add a drop of food coloring (if you need a rich color, you will need more coloring).
4. Thoroughly mix all the ingredients with a plastic spatula or stick.
5. Pour the mixture into a plastic bag.
6. Thoroughly knead the mass in the bag so that it is evenly colored and turned into a plastic substance.
7. We take out the slime from the package and we can immediately play with it!

Store a toy prepared in this way in a sealed container in the refrigerator. After playing with the shampoo and glue slime, the child should wash their hands well.

This method requires the purchase of special ingredients. But believe me, the result is worth it!

Required materials and tools:

• any food coloring, brilliant green, iodine, gouache paints;
• PVA glue, always fresh, in the amount - 100 gr .;
• borax solution (4%) or borax (sodium tetraborate) - these components can be purchased at a pharmacy, specialized stores selling chemical reagents.
• water;
• jar or glass;
• polyethylene bag for kneading.

Cooking method:

1. Take water at room temperature (about 1/4 cup).
2. Slowly pour PVA glue into a container of water, mixing gently. If you need a more elastic slime, then take a little more glue.
3. Now it's time to add sodium tetraborate - if a solution is used, then one vial is enough. The powder must first be diluted in water at the rate of: a tablespoon of borax per 100 ml (half a glass) of water.
4. While constantly stirring the mixture, carefully add the dye.
5. We transfer the resulting mass with the dye into a bag and knead well until it turns into a slime of the proper consistency.

Slime prepared in this way is practically no different from a store toy.

Video on how to make slime from pva, sodium tetraborate and water

Every housewife has soda in the kitchen, why not use it to make slime? Just a few additional ingredients - and the original toy for the child is ready! the only drawback of such a slime is its fragility, a soda toy will last only a few days.

Required materials and tools:

• baking soda - a tablespoon with a slide;
• PVA glue - 50 gr.;
• warm water - 1/2 cup;
• food coloring - a few drops;
• spatula for mixing components;
• plastic containers - 2 pcs;
• latex gloves.

Cooking method:

1. In a plastic container, dilute PVA glue (50 gr.) In warm water (1/4 cup).
2. Add a few drops of dye to the glue water.
3. In a separate bowl, mix soda (a tablespoon) with warm water (1/4 cup).
4. Slowly pour the soda solution into the water-glue solution, stirring constantly, waiting for the mass to compact.
5. Thoroughly mix the resulting substance - this is the slime!

To prepare such a slime, you will need liquid washing powder, it is not recommended to replace it with a dry one.

Required materials and tools:

• washing powder (liquid);
• PVA glue;
• dyes;
• rubber gloves;
• a bowl for preparing a mixture of ingredients.

Cooking method:

1. Pour the glue into the bowl (it will take about a quarter cup).
2. Add a few drops of dye and mix well.
3. Now pour liquid laundry detergent into the glue with dye - about 2 tablespoons, stirring constantly.
4. Put on gloves and continue kneading the mixture with your hands (like dough). The consistency of the kneaded mass should be similar to soft rubber, stretch well and take various forms.

Was there no starch in the house? No problem! It will be completely replaced by ordinary flour - be sure to sift it before using it so that there are no lumps that can ruin the slime.

Required materials and tools:

• water (hot and cold);
• any food coloring;
• flour (grade does not matter) - about 2 full glasses;
• utensils for preparing a mixture of components;
• spatula or spoon.

Cooking method:

1. Sift the flour through a fine sieve into a mixing bowl.
2. Add cold water (1/4 cup), mix well.
3. Add 1/4 cup hot water (but not boiling water!).
4. Stir the mixture until it thickens.
5. If desired, add dye.
6. Send the mass to the refrigerator, where it will spend 2 hours.

When the specified time has passed, take it out of the refrigerator and give it to the kids to be torn to pieces - they will appreciate the quality and functionality of the resulting toy!

A toy prepared according to this recipe will look more like a jumper than a slime, since its consistency is much denser.

Required materials and tools:

• hydrogen peroxide (usual pharmacy);
• water - 100 gr.;
• PVA glue - 100 gr.;
• soda or starch - 100 gr.;
• container for mixing ingredients;
• spatula.

Cooking method

1. Mix starch or soda with water in a prepared container.
2. Pour in the PVA glue and mix, after adding the dye.
3. Add a little hydrogen peroxide - the mass will become light, airy.
4. Continue kneading until a homogeneous, tight mass.

To prepare this slime, you will need a special alcohol - polyvinyl. In no case should you replace it with medical alcohol or vodka! Also in the composition of this recipe is the already familiar sodium tetraborate.

Required materials and tools:

• powdered polyvinyl alcohol;
• water;
• sodium tetraborate;
• container for mixing components;
• scapula.

Cooking method:

1. Dilute powdered polyvinyl alcohol with water according to the instructions, cook over low heat for about 40 minutes. The mixture should be constantly stirred to prevent burning.
2. Mix sodium tetraborate (two tablespoons) with one glass of water, achieving complete dissolution.
3. Strain the resulting sodium tetraborate solution and slowly pour it into the polyvinyl alcohol.
4. If necessary, add dye and knead the resulting mass thoroughly.

Do you want to surprise children by preparing a slime that glows in a dark room and is attracted by a magnet? Get started!
Required materials and tools:

• iron oxide;
• sodium tetraborate
• ordinary water;
• phosphor paint or dye;
• PVA glue;
• magnets (neodymium),
• utensils for mass preparation.

Cooking method:

1. Dissolve 1/2 teaspoon of sodium tetraborate in a glass of water.
2. In the prepared container, mix PVA glue (30 gr.) And 1/2 cup of water. Add phosphor paint to this mixture (it is it that provides glow in the dark) or a regular dye to add color.
3. Pour the sodium tetraborate solution into the water-adhesive mixture in a thin stream, constantly stirring the mixture to the desired consistency. As soon as the required mass density is reached, stop adding the solution.
4. The slime is already ready, now it is necessary to make it so that it is attracted by a magnet. To do this, level the mass and sprinkle with a small amount of iron oxide powder. Knead well so that the powder is evenly distributed throughout the mass.

Slime is ready!

1. Try to find the ideal consistency of the mixture being created, focusing on your own feelings. A properly made slime is one continuous clot, a homogeneous mass, moderately viscous and sticky.
2. If you feel that the mass does not meet expectations, add the component necessary to correct the situation in a larger amount. If the mass is liquid, dry components should be added, if, on the contrary, it is thick, then dilute the mixture with water or glue.
3. To give the slime a more original appearance, glitter, mother-of-pearl powder dyes can be added to the prepared mass.
4. Cooked slimes should be stored in a tightly closed container, placing it in the refrigerator.
5. It is necessary to warn children that it is impossible to lick lickers, bite them, no matter how much you would like to.
6. Wash your hands well before and after playing with slime.

Be sure to try making slime at home with your kids. Bright, original handgam is great fun for the whole family! Have fun and have a good time with the kids!

All kids love to play with slime. Not only does this mass, due to its plasticity and malleability, allow the child to do whatever they want with it, it also allows them to develop fine motor skills of the hands. And this, in turn, favorably affects the intelligence of the baby. Such a product is also called a slim or handgum.

If the baby wants such a toy, then there will be no problems with buying it, because it is sold almost everywhere. But why give extra money when you can make a slime at home with your own hands. And for this you need the simplest materials, which, moreover, are cheap.

How to make slime with PVA glue

In a house where there are small children, finding PVA glue is not a problem. But besides the application, it is also useful for creating a slime. The main thing is that it should not be "stagnant".

Ingredients:

• PVA glue - 1-2 tbsp. l.;
• water - 150 ml;
• salt - 3 tsp;
• glass container.

If there is a desire to make a colored slime, then these components still need food coloring (1/3 tsp).

Preparation method:

1. Hot water is poured into the dishes and salt is added, after which everything is well stirred. It is best to use fine salt, as it dissolves quickly and well.
2. Next, while stirring the liquid, dye is added to it. By the way, if it is not at hand, then you can use ordinary gouache (1 tsp).
3. As soon as the water cools down a little, all the glue is poured into it without stirring and left for 20 minutes.
4. After the specified time, the mass begins to slowly knead with a tablespoon. This process will cause the glue to gradually separate from the water, while its consistency will just begin to gain the desired look.
5. As soon as all the substance has gathered around the spoon, it can be picked up.

The proposed version of the slime will have a somewhat stiff consistency. But if you want to make a softer version of the slim, then you should use the following recipe.

How to make slime from sodium tetraborate at home

This substance is easy to purchase at any pharmacy. It is also called burat, which allows you to soften the toy. To create a slime would need:

• 1/2 tsp sodium tetraborate;
• 30 g PVA glue (it is recommended to use transparent);
• 2 containers;
• 300 ml of warm water;
• optional cooking coloring.

Whole the process is as follows:

1. A glass of water is poured into one of the containers, into which burat is gradually poured, stirring constantly.
2. Pour 1/2 cup of water into the second container, add glue.
3. If a dye is used in the manufacture, then it is added to the diluted glue. For intense color, it is recommended to use 5-7 drops. You can also experiment with the gamma, for example, add 3 drops of green and 4 drops of yellow.
4. As soon as the glue and dye acquire a homogeneous mass, it is added to the first container. This should be done in a thin stream, while stirring constantly.
5. As soon as the desired consistency is reached, the slime is removed from the container. The toy is ready!

Another version of slime from tetraborate

Based on sodium tetraborate, there is another manufacturing recipe. But in this case, you still need polyvinyl alcohol in powder. All work is as follows:

1. Powdered alcohol is boiled over a fire for 40 minutes. The label has detailed instructions on how to prepare it (it may vary slightly for each manufacturer). The main mixture is constantly stirred in order to form a homogeneous mass and prevent it from burning.
2. 2 tbsp sodium tetraborate is mixed with 250 ml of warm water. The mixture is stirred until the powder is completely dissolved. Then it is filtered through fine cheesecloth.
3. The purified solution is slowly poured into the alcohol mixture and mixed thoroughly. The mass will gradually thicken.
4. At this stage, add 5 drops of dye to give the slime a bright color. But gouache will not give an intense shade, so it is better to use food coloring.

Important! Sodium tetraborate is quite toxic. Therefore, the main task of parents is to control that the baby does not put handgams in his mouth. If this happens, then you need to rinse the child's mouth and preferably clean the stomach. And also urgently seek medical advice!

Slime made of tetraborate is more suitable for children from 4-5 years old, as it is easier for them to explain the safety of using the toy.

Slime from starch

If it is not possible to buy sodium tetraborate or you just want to make a safer version of the slime, then the recipe with starch easily solves this problem. Perhaps every mother in the kitchen has:

• 100-200 g of starch.
• Water.

Manufacturing method:

1. Both ingredients are taken in equal proportions. To make the starch dissolve more easily, it is recommended to use warm water, but not hot. Otherwise, the starch will begin to coagulate strongly, which will violate the correctness of the substance.
2. To make the consistency elastic, the powder is added gradually.
3. For altering it is convenient to use an ordinary spoon or skewer. Thus, the entire mass will be wound around the object, after which it will be easy to remove it.

To give the slime color, you can add food coloring, gouache or even brilliant green to the water.

shampoo slime recipe

Handgam can also be prepared from shampoo. It is even more convenient, because modern products have not only a pleasant smell, but also different colors. And this means that you can save on food coloring.

1. To create a small toy, take 75 g of shampoo and detergent, which put the dishes (or liquid soap) in order. It is desirable that they match in color.
2. The components are well mixed to a homogeneous mass. But! The main thing here is not to foam them, so all movements should be slow.
3. The resulting mass for a day is placed in the refrigerator on the lower shelf.
4. After the specified time, the slime is ready for use.

Shampoo and Salt Slime Recipe

There is another way to prepare a slime, but here the detergent is replaced with a pinch of fine salt. In a container, all ingredients are mixed and placed in the refrigerator.

But unlike the above option, it will take only half an hour to “harden” the slime. Judging objectively, such a toy is more suitable as an anti-stress. Or even to warm up the fingers, as it has increased stickiness.

Important! This option, although simple to manufacture, requires certain operating and storage conditions.

• Firstly, after the games, it must be placed back in the refrigerator, otherwise it will “melt”.
• Secondly, it is not suitable for long games, since at elevated temperatures it begins to lose its plasticity.
• Thirdly, we must not forget what the slim is made of, that is, after each game, the baby must wash his hands.

And this is not to mention the fact that parents should make sure that he does not take a toy in his mouth. Well, if the slime has collected a lot of garbage on itself, then it will not work to clean it - it is better to throw it away and start making a new toy.

Slime from toothpaste at home

In this case, the main ingredients will be half a tube (about 50-70g) of toothpaste and PVA glue (1 tablespoon).

It’s worth saying right away that at first the slime will have a smell, but it disappears quickly enough, so mom doesn’t have to worry much about this.

Both ingredients are placed in a container and mixed well. If the consistency is not plastic enough, then a little more glue is added to the container. Then the mass is placed in the refrigerator for 15-20 minutes.

Such a slim performs two roles:

• if they are played when it is warm (at room temperature), then it will be a slime;
• while the product remains cold, an adult can use it as an anti-stress.

There are also two more ways to make slime from toothpaste:

Method 1: Water bath. Pasta is placed in a saucepan (the amount depends on the desired volume of the toy) and placed on a container of boiling water. After that, the fire is reduced to a minimum and begin to stir. The whole process takes 10-15 minutes.

As moisture is removed from the paste, it will acquire a looser consistency. Before taking the substance in hand, they are lubricated with ordinary sunflower oil. The mass must be well kneaded until the product acquires the desired look.

Method 2: In the microwave. Again, the required amount of paste is placed in a container. But in this case it is better to use glass or ceramic dishes. The timer is set to 2 minutes.

After that, the paste is taken out and mixed well, then the mass is placed again in the microwave, but for 3 minutes. The final stage is the same as in the previous one: with pre-oiled hands, the mass is kneaded until fully cooked.

Since this slime will be slightly oily, mom should control how the baby plays. Otherwise, there will be a lot of washing and cleaning.

How to make slime out of shaving foam

And this option is great for creative fathers. The main advantage of the method is that airy shaving foam allows you to create large slims.

Required components:

• shaving foam (how much dad does not mind);
• borax - 1.5 tsp;
• stationery glue;
• water - 50 ml.

Manufacturing:

1. First, the burate powder is completely dissolved in warm water, so that the crystals are no longer visible.
2. After that, foam is placed in a separate bowl and mixed with 1 tbsp. glue.
3. Now the first solution is gradually poured into the resulting mass. The mass will gradually begin to thicken, due to which it itself will lag behind the walls of the container.
4. As soon as the slime stops sticking, including to hands, it can be considered ready.

Advice! The borax is gradually poured into the foam, since it is difficult to say what quality the foam itself is. It is quite possible that more solution will be required to thicken it, or dad simply will not spare his money for the baby. Therefore, during preparation, it is best to keep the borax on hand in order to have time to prepare another portion of the solution.

We make slime from detergent at home

The recipe has already been presented above, where the detergent appeared. But there is another way to use the specified ingredient in the manufacture of slime.

Components:

• detergent - 1 tbsp;
• soda - 1 tsp;
• hand cream - 1/2 tbsp;
• optional food coloring of the desired color.

Manufacturing:

1. Pour detergent into a glass container and add soda, after which everything is thoroughly mixed. Stir so that the mixture does not foam, but at the same time gradually acquires a thicker consistency. If, according to the sensations, it has become too thick, then it is diluted with water - poured in a teaspoon.
2. Next, cream is added to the container and again mixed until a homogeneous mass.
3. The next is the selected dye - 5-7 drops.
4. The solution will be thick, but for better plasticity, it is recommended to pour it into a bag and place it in the refrigerator for a couple of hours.

It should be said right away that as the mass cools, the color of the slime may change somewhat.

How to make a simple salt slime

Salt can be used not only in cooking, but also in the preparation of homemade toys. A vivid example of this is not only dough-plasticine, but also slime. For such work, in addition to salt, you still need a little liquid soap and dye.

The creation steps are as follows:

• liquid soap (3-4 tsp) is mixed with dye;
• add a pinch of salt to the resulting mass and stir;
• the substance is placed in the refrigerator for 10 minutes;
• after the specified time, another mixing is carried out.

In this case, salt does not act as the main ingredient, but as a thickener. Therefore, with its amount you need to be careful not to get rubber.

How to make your own sugar slime

Sugar, like salt, can be found in any home. The next method will allow you to create a transparent slime. True, provided that no dye is used.

Two main ingredients - 2 tsp. sugar for 5 tbsp. l. thick shampoo. If you want to get a transparent slime, then you should choose a shampoo of the same color.

The preparation is very simple:

1. The two main components are well mixed in a cup.
2. After that, it is tightly closed, for which you can use cellophane and an elastic band.
3. The container is placed in the refrigerator for 48 hours.
4. As they pass, the toy will be ready for use.

Slim made from sugar is also temperature sensitive, so it's best to store it in the refrigerator.

Lizun from soda at home

There is another recipe for making slime at home, where soda will be used. Liquid soap or dish detergent is added to it, and the amount of the last ingredient directly depends on the desired volume of slime.

1. Pour detergent (soap) into a saucepan and mix with soda.
2. Next, one or more dyes are added.
3. Knead until the mass is thick enough and ready to use.

How to make a slime out of flour

This option is suitable for the smallest children, since nothing hazardous to health is included in the slime recipe. If the baby tastes the slim, then the mother will not worry too much. Although, for the sake of justice, it is worth saying: the flour toy does not remain plastic for long.

For making slime from flour you will need:

• wheat flour (it is not necessary to take the best variety) - 400 g;
• hot and cold water - 50 ml each;
• dye.

Advice. If you want to make a completely natural slime, then for painting you can use boiled onion peel, beetroot or carrot juice, spinach.

Cooking has several main steps:

1. Initially, the flour is sifted into a separate container.
2. Next, cold water is added to it in turn, and then warm water. In order not to suffer with lumps, it is best to pour the liquid in a thin stream, constantly stirring the resulting mass.
3. Now add dye or juice. The amount of paint directly affects the intensity of the color.
4. Then the mass is allowed to cool for 4 hours. Best on the bottom shelf in the refrigerator.
5. When the cooling time is over, the slime is taken out of the container. If the product sticks a little, it is lightly sprinkled with flour or smeared with sunflower oil.

The finished slim retains its elasticity for 1-2 days, and if it is stored in a bag, it will last a couple more days. But, despite such a short period, this slime is the safest for the baby, since it does not include any chemistry.

Lizun is a kind of chewing gum for hands (handgam), which is now experiencing the second peak of its popularity. This toy has the ability to take any shape, it can be twisted and wrinkled, tossed and deformed, glued to different surfaces and easily peeled off from them, you can even glue (only briefly) with its help some details.

Slime has the consistency of jelly, but it is not able to melt. The toy helps in the development of fine motor skills, stress relief and calming the nervous system as a whole.

You can buy handgams in a toy store; in appearance, all models are almost the same. However, their quality can vary quite a lot. Often, cheap Chinese slimes are made from low-quality, and sometimes frankly harmful substances. That is why parents who care about the safety of their children most often create such toys on their own. Moreover, the ingredients necessary for this can be found in every home.

How to make a slime from liquid silicate glue

Silicate glue is a common material from which most handgams are made. You can make a slime with your own hands like this:

• mix in a separate container one part of glue (silicate or clerical, for example, pva) and one part of medical alcohol;
• add a little coloring matter to this consistency (food coloring is suitable for this purpose, which are absolutely safe for children's hands);
• after all the ingredients are mixed, you need to hold this mixture under a stream of ice water, waiting for the slime to harden.

This method of making sticky toys does not require a lot of materials and time, but it is rarely used due to the fact that alcohol is used in the recipe.

How to make a "glass" or transparent slime

You can create a glass slime that is completely transparent without much effort. To do this, you need to prepare sodium tetraborate (all known borax) and ordinary liquid transparent glue (silicate).

The process of creating a transparent handgam looks like this:

• in a glass container, mix one part of glue and sodium tetraborate;
• mix the composition thoroughly with a plastic spatula;
• after a minute, the glass slime will be ready.

Making slime from water

Making a slime “like in a store” is quite easy, for this you need PVA glue (office glue), water and a little time.

Technology for creating water slime:

• pour 50 ml of slightly warm clean water and 100 gr. PVA glue (it is important that its expiration date is not expired);
• the mixture must be thoroughly stirred, in case it turned out to be watery, you need to add a certain amount of glue;
• now you need to pour 1 vial of sodium tetraborate (4% solution) into this composition;
• if borax is purchased, which is in a powdered state, it must be diluted with water (in the proportion of 1 tablespoon per 0.5 cup of water);
• it is important to monitor the amount of borax and not to exceed its amount, otherwise the slime will be too hard and less plastic;
• in conclusion, any dye must be added to the composition, it can be either a food or an ordinary solution of brilliant green.

At the end of the process of creating a slime, it must be put in a plastic bag and kneaded thoroughly. Important! After playing with such a handgam, you should definitely wash your hands.

How to make slime from soda

Some believe that tetraborate is not needed in children's toys, and resort to making slimes without borax. It perfectly replaces ordinary baking soda. Moreover, from soda you can make both a transparent handsome man and a multi-colored slime (if you add a dye).

Creating such a handgam is easy:

• first you need to dilute 100 ml of glue in 50 ml of water;
• using a wooden stick, introduce a little coloring matter into this liquid;
• the composition must be stirred until complete dissolution and combination of all ingredients;
• now you need to mix 150 gr. soda and 15 ml of water;
• add this mixture to the color composition;
• now the mass needs to be transferred to a plastic bag, shaken and kneaded thoroughly - from these manipulations the slime will gradually thicken and become elastic.

Just a minute of exposure and your own handgam is ready! Note! Such a slime should only be stored in a closed jar or bag, otherwise it will dry out and lose elasticity.

We sculpt a slime from plasticine

A homemade slime is very easy to create from plasticine, which is in every children's room.

It is prepared like this:

• The handgam manufacturing process is quite dynamic, so you need to prepare all the necessary ingredients in advance: plasticine (a strip from a standard set or 100 gr.); food gelatin - 15–20 gr.; glass of water; container - glass or plastic for mixing all parts and metal for heating gelatin; slime spatula.
• Gelatin should be poured with water in a metal bowl and allowed to swell for 1 hour.
• Now you need to heat the swollen gelatin over low heat, without bringing it to a boil.
• Separately stretch the plasticine so that it becomes very soft and takes over body heat.
• In a plastic bowl, pour the mashed plasticine with 50 ml of hot water and mix this mixture thoroughly with a spatula.
• Now it remains to carefully mix the slightly cooled gelatin and plasticine mixed with water.
• In conclusion, the slime must be removed in the refrigerator and left in it for half an hour, after which it can be played with.

How to make slime from shampoo

A very interesting recipe for making slime involves the use of shampoo, which is sure to be found in every apartment. There are several options for creating such a handgam:

• Mix the same amount of hair shampoo, baking soda and water in a plastic container. You can add any dye or leave the slime white. You need to store it in a cellophane bag.
• You can combine shampoo and water with flour to get a thicker toy consistency. Important: knead the composition in warm water, and add the dye before the flour.
• Often, starch is used instead of flour, which allows you to sculpt beautiful sticky crocodiles or create your own dolphin.

Note! Slimes, which contain flour, are quite sticky and have an unpleasant ability to leave greasy stains on light-colored wallpaper, which is not easy to wash.

How to make slime from liquid laundry detergent

Young inventors came up with the idea of ​​using liquid laundry detergent to make slimes. Moreover, ordinary washing powder or dishwashing liquid, in this case, will not have the desired effect, and it is unlikely that a high-quality slime will be obtained.

To create such a handgam you need:

• mix in a container ¼ part of a standard tube of PVA glue with food coloring;
• achieve a uniform consistency and color by thorough mixing;
• add to this composition no more than 2 tbsp. l. liquid detergent;
• mix the resulting mixture;
• if the composition is very thick, you need to slowly, literally drop by drop, add liquid washing powder to it until it acquires the desired consistency;
• now you need to gently knead the entire composition for 5-10 minutes (it is better to wear rubber gloves);
• the finished slime is stored only in a container that is hermetically sealed.

If some of its properties are lost over time, you can put handgam in the refrigerator for a while.

How to make a DIY magnetic slime

It is very interesting to play with a slime, which tends to be attracted to a magnet. To do this, do the following:

• Mix a glass of water and half a teaspoon of borax and glycerin in a bowl until smooth.
• Separately, you need to mix 150 ml of water and 30 gr. glue, gradually adding a small amount of coloring matter to them. You can make the handgum luminous, for this at this stage you need to add a small amount of phosphor paint to it.
• Now you need to mix both mixtures, gradually adding one to the other. It is important to carry out this process slowly, as soon as the desired density of the composition is reached, tetraborate will no longer need to be poured.
• After you need to carefully roll out a layer of slime on a flat surface and pour a certain amount of iron oxide into the middle.
• Now the composition is again kneaded until a uniform shade is obtained.

How to make slime from flour

Lizun, which contains flour, is considered quite safe for children. However, in any case, you need to watch the children's games, because even the safest composition can choke.

You can make slime from flour like this:

• sift through a sieve 2 cups of flour;
• add ¼ part of ice water to the flour;
• now pour ¼ of the hot water into the container;
• the mixture must be mixed well, allowing the flour to stick everything together so that there is not a single lump in it;
• finally, pour in a little food coloring and stir the composition again;
• in conclusion, the slime is left for 2 hours in the refrigerator until it cools completely.

Slime from nail polish

Very interesting Velcro is obtained from nail polish, it is not too difficult to prepare them:

• Pour any nail polish into a glass container.
• Add a little vegetable oil to it, mix everything thoroughly and for a long time.
• Now, using rubber gloves, you need to get the dye out of the container, which, thanks to the oil, has strayed into the middle. It must be gently kneaded by hand.
• Slime is ready. You can put it in the refrigerator for half an hour to increase elasticity.

The main disadvantage of such a handgam is the unpleasant smell of acetone, which is inherent in every nail polish. Therefore, it is hardly suitable for the games of young children.

How to make an edible Nutella slime

This toy is sure to please every child. It can be made quickly and easily. For this you need:

• melt in a water bath 100 gr. marshmallows or chewing marshmallows;
• the melted mass will turn out sticky and viscous;
• now you need to add Nutella chocolate paste to this mass, it is better to do this gradually, in small portions;
• when the composition is slightly mixed, it must be picked up and kneaded for 5 minutes, achieving uniformity in color and consistency.

You can play with such a slime a little, and then, with no less pleasure, enjoy it with tea.

How to wash a slime

Such a toy is quite sticky in its consistency, so it is not surprising that everything, including dirt, quickly sticks to it. Playing with such a handgam becomes simply unpleasant, and even uninteresting, because having collected garbage on itself, it simply stops sticking and stretches well. You can fix this problem by washing the Velcro, in addition, you need to properly clean it:

• You can rinse it in a container with water and put it in a closed bowl in the refrigerator for a while.
• Often a syringe is used, into which you need to draw a slime and slowly squeeze it out. All debris, at the same time, is collected in the nozzle of the syringe.

A handmade handgum becomes truly dear to a child, and keeping it intact becomes a top priority. In order for the toy to please the baby for as long as possible, you need to adhere to the following rules:

• Keep the slime only in closed containers or tetra-packs, preventing it from drying out and dust.
• Do not use soap to wash toys.
• Do not leave handgams near heating devices (batteries, solar window sills).
• The child should not leave the toy on surfaces that have pile (carpets, blankets, fur), otherwise he will definitely collect his particles on himself.
• If the slime has stopped stretching well, you can add a few drops of vinegar or a little glycerin to it.

Slime is a versatile toy that is easy to make with your own hands at home. It will allow the child not only to have a great time, but also to develop fine motor skills of the hands, which is very important for a growing person.