It is better to close the pipes in the bathroom. How to close the pipes in the toilet - effective design and decor options (45 photos)

The question of how to hide the pipes in the bathroom without mounting them into the wall worries almost every property owner who is faced with the "charms" of old-style domestic housing construction. Yes, in most new modern apartment buildings, this problem is largely solved by pre-planned indoor installation. In this case, the appearance of the bathroom is not spoiled by ugly pipes, the overall aesthetics of the room is preserved, you can make beautiful and expensive repairs - and it is quite reasonable to count on an impressive result. But what about the other way around? Do not sprinkle ashes on your head - the task is much easier to solve than you think, and for this you do not need to reshape the family budget or learn some new skills.

What you need to know before installation

Every detail in any mechanism has its own purpose. Pipes in this regard can also be perceived as elements of a single and well-established system. A system that may fail sooner or later, which means that prompt access to pipes is not a wish, but a necessity. There are a number of comments from experts that you should carefully listen to if you want to handle the operation correctly:

• if there are any threaded type connections, taps, etc. on the pipes, then with any type of communications masking chosen, quick access to them should be provided;
• when installing a mandatory decorative box or lining pipes with plastic panels, provide for the creation of an inspection hatch;
• communications made of metal-plastic have connections - the so-called fittings - that are regulated by keys, these areas need constant monitoring on your part and the possibility of prompt intervention in case of a leak;
• do not place pipe inspection hatches in places where there are no connections - the chance of leakage in these areas is so minimal that it should not even be taken into account;
• immediately before installation, you should carefully check all communications - and correct any defects noticed before installing a false wall or box;
• to prevent condensation, it is recommended to insulate water and sewer pipes.

Remember that the functionality of well-established engineering communications in the bathroom should not be sacrificed for decoration. A reasonable balance is always somewhere in the middle, and following the simple rules above will help you not only beautifully deal with the problem of visible pipes, but also maintain confidence in their reliable functioning.

All ways of masking pipes

Let's try to list the most common ways to mask sewer and water pipes in the bathroom. There are both the simplest options, which one would like to call elementary, and a little more complicated, requiring sequential installation.

1. decorative mosaic;
2. polyurethane "stucco";
3. metal gratings;
4. moisture resistant furniture for bathrooms;
5. roller shutters;
6. decorative boxes and niches.

decorative mosaic

• suitable for gluing large and wide elements;
• you can choose any color and texture according to the interior designed in the bathroom;
• rather high cost.

A method that is a sin not to use if, for example, you need to beautifully and quickly close a sewer riser, a wide pipe. In all other cases, it reveals its unsuitability due to the complexity of working with the material itself - pieces of decorative mosaic made of ceramics, natural stone or glass. As an unconditional plus, there are a huge number of options, so no matter how refined and unusual your bathroom is, we can say with confidence that choosing a mosaic for it is a matter of a short time.


Take a look at how you can camouflage bathroom pipes with decorative mosaics. It’s even hard to guess where the pipes are hiding in the photo below. And they are.


This method of finishing can be used not only in bathrooms, although wooden mosaics are better suited for this.

Polyurethane "stucco"

• base material - polyurethane;
• skillfully imitates real clay stucco;
• gives the room a noble look;
• placement specifics;
• easily dismantled.

Even in the event of a leak, it is enough to simply replace a whole fragment of such a structure without any aesthetic loss. One of the disadvantages of this option is that it does not always look appropriate, especially in the format of a high-tech bathroom. In addition, the nature of the placement of the pipes also matters: if in a vertical position the polyurethane molding effectively and beautifully emphasizes the interior, then in the horizontal position all organic integration disappears and the design looks at least ridiculous.

Metal gratings

• stainless steel or chrome plated;
• used in combination with a frame;
• affordable price;
• fit perfectly in modern bathrooms.

Quite a sober and relevant solution if you want to hide the pipes in the bathroom, but there is no desire to mount them directly into the wall. Do not look for a special decorative revelation here - and where does it come from. Perhaps this is the most practical and functional option that will not hurt your wallet. And you can find the answer to another topical question on sealing the gap between the bathroom and the wall in the article of the same name: " How to close the gap between the bathroom and the wall".

Moisture resistant bathroom furniture

• perfectly retains performance in conditions of high humidity;
• made of painted or laminated chipboard;
• perfectly combines practicality and decorativeness;
• requires the necessary space in the room;
• sometimes the price is quite high.

However, to be honest, good bathroom furniture really costs a lot. Take the same sets of the famous Spanish brand Roca : a convenient hanging wardrobe from the Victoria limited collection will perfectly close water pipes that are unnecessary to the eye, but will require unloading the family budget for 12 thousand rubles . But at your disposal there will also be a lot of space for towels, bottles and all sorts of things on the shelves. Some cabinets or pencil cases are equipped with a spacious laundry basket, which saves space.

roller shutters

• recommended for use in niches;
• elementary installation;
• blinds and shutters;
• noise protection in communications;
• attractive appearance;
• break easily;
• provide quick access to key nodes.

The main problem of roller shutters is that they lose their concise and attractive appearance at the first slight mechanical impact. Alas, they are made of light and brittle materials that simply cannot withstand pressure from the outside. But the low cost should be written as a plus, which for many owners is almost the main priority.

Decorative boxes and niches

• require the installation of a frame;
• not recommended for use in small bathrooms;
• drywall or plastic is used;
• reliable moisture resistance;
• low price.

Probably the most popular option today, which is especially recommended for rooms with a good supply of free square meters. At the same time, it is also the most difficult, since it will be necessary to build a frame. About all the stages of installation of drywall boxes - below.

Features of mounting a drywall box

The bathroom is a room in which there is constantly high humidity. This means that drywall to create a box should be selected moisture resistant. As a rule, it is commercially available in green sheet format.
Drywall itself has many advantages as a reliable and environmentally friendly finishing material:

• easy to cut;
• forms an aesthetically attractive and durable surface;
• allows you to create a reliable and safe false wall or partition;
• goes well with plaster or ceramic tiles.

What will be needed?

• profiles;
• moisture resistant drywall;
• silicone sealant;
• screws;
• dowels;
• perforator.

What is the secret to successfully installing a drywall camouflage box in a bathroom? Strictly following the detailed installation diagram below will help you quickly and efficiently hide the pipes in the bathroom without mounting them into the wall:

1. think in advance how the box will look like, make sketches on paper, give your notes the appearance of a clear and well-thought-out scheme;
2. take the necessary measurements to find out how much material you need;
3. calculations are made that determine the required amount of materials;
4. at the points of contact between the pipes and the wall, use a perforator and dowels with screws to fix the guide profiles - this is how you set the boundaries of the frame of your future structure;
5. fasten the same profiles on the floor and ceiling - for perfect fixation of the upper and lower parts of the box;
6. install the corner outer profile and fix it with stiffeners for stability, they can be made from the same guide profiles by connecting the corner profile with the obtained fragments with what is fixed on the wall;
7. sheathe the frame with drywall, cutting out the necessary fragments with a knife and inserting between the profiles;
8. after sheathing, treat all joints with sealant;
9. it remains only to finish the surface of the box - paint, plaster, overlay with ceramic tiles.

If your bathroom walls are covered with tiles, then you can finish the box in the same way. So the resulting design will look organically in the interior of the bathroom and will not visually take up a lot of space.


By the way, drywall sheets in the bathroom can be successfully replaced plastic panels. True, the strength of the material speaks in favor of the former. Plastic, for all its advantages, is still a much more fragile material.



It seems that this way to hide the pipes in the bathroom is the most difficult, but if you figure it out, then there is nothing complicated about it: consistent execution of all installation points will lead you to a good result .



For better visibility - a few videos from professionals.

Bathroom renovation is not an easy task, it is necessary to provide for a lot of things, and among them - how to hide the pipes. If in new buildings this problem is not so relevant, then in Khrushchevs pipes spoil the interior, and you should think carefully about how to hide them.

The most problematic places in the bathroom are the connection points of the bathtub, washbasin, shower cabin, heating radiator and washing machine. Having determined where they will be placed, places are marked for the exit of pipes, and the sewer drain must be marked with a slope. An experienced plumber will help you lay out the pipes, but you still need to take care how to hide them, because even the most sophisticated interior spoils the look of water and sewer pipes. There are several ways of hidden pipe laying, but it is worth remembering that it is more expedient to hide a system assembled from plastic pipes in the wall - their connections are made by soldering or gluing, they are durable and do not rust. If you prefer to make communications from metal pipes, then it is better to use copper or stainless steel pipes and fittings. It is necessary to mount the system in one piece, avoiding a large number of connections. To prevent fogging of pipes, it is necessary to provide for their thermal insulation. In order to hide the pipes, special recesses (strobes) are made in the walls with the help of a grinder or a chisel in the places where they are laid. Places where pipes are laid are plastered and tiles are laid on top, leaving an opening so that there is free access to the drain siphon, for which a hatch is installed.

Another way to disguise the pipes in the bathroom is to hide them behind partitions or drywall boxes. You can build a box from boards connected at an angle of 90 °, in this design the side part will close the pipes, and the top part is attached to the wall. Such a box can be decorated with tiles and used as a locker. Instead of wood, plastic panels are often used that do not need to be sheathed. Having picked up the panels of the required dimensions, they carry out the design, and the corners are closed with plastic elements.

A common way to mask pipes is to make a drywall box, which is decorated with tiles. To do this, a structure is made of metal corners, which is sewn up with sheets of moisture-resistant drywall, and tiles are laid on top, if necessary, an inspection hatch is installed. At the same time, it is worth remembering that it is better to strengthen the structure with a plastic mesh before laying the tiles so that it holds better.

One of the simple and effective ways to hide pipes is to install roller shutters. With their help, you can close the wall of the room from ceiling to floor, while maintaining the possibility of easy access to communications, and this design looks quite attractive.

In order for the interior of the bathroom to please and at the same time remain functional, it is necessary to take into account every little thing. It is a matter of taste to hide the pipes in a wall, a specially assembled drywall box or plastic panels, but care must be taken to provide access to them in case of an emergency.

In any room of the apartment where water is supplied, there are a number of pipes that, by their presence, spoil the overall picture of the design. Therefore, in each project of an apartment or house, builders and designers use different techniques to hide pipes and communications.

How and why to hide pipes in the bathroom

So why hide pipes? The answer is simple.

From a purely aesthetic point of view, you don’t want to see plastic or metal pipes in a luxurious bathroom lined with, for example, Italian tiles.

But, in addition to beauty, we must not forget about practicality, and therefore everything must be done so that the pipes are not visible, but at the same time, easily accessible in case of problems with plumbing or sewerage.

Competent disguise of economic communications sets itself such a goal - beauty and functionality.

How to hide pipes in the bathroom

There are four objects in the bathroom that require piping:

• bath;
• wash basin;
• toilet;
• washing machine.

And each of these objects require a separate water supply and sewerage. Therefore, the placement of all plumbing objects, which they all are, needs to be thought about in advance.

It is ideal at the stage of reconstruction of the premises to think over everything in order to competently, correctly and conveniently conduct all communications to them. These issues should be discussed with the builders and the designer if you are not doing the project yourself. Only in such a tandem can one understand what, how and where to place it correctly.

After you have figured out where and what you will place, you need to decide how exactly you want to hide the pipes. There are several options.

INSTALL THE PIPES INTO THE WALL

Installing pipes into the wall is the most aesthetically accurate method. From a practical point of view, pipes embedded in the wall become practically inaccessible.

This method will require a lot of effort to implement it, because in order to hide the pipe into the wall, you need to drill special grooves and lay pipes in them. You will also need holes for wider sewer pipes.

Please note that only polypropylene, plastic and copper pipes are suitable for this type of gasket. The method by which pipe joints need to be connected is welding or soldering.

There is one more trick - before laying pipes, provide them with thermal insulation using pipe insulation. It will protect the pipes from condensation when they are already inside the walls, and will also allow the pipes to expand, which inevitably happens with any pipes over time.

When mounting pipes into a wall, ensure that you have access to at least the pipe joints. Otherwise, if you need to get to them, you will have to break the walls. There are a large number of options for doors and hatches that are built into the wall in order to open access to communications.

An interesting solution for the bathroom - it was placed on an elevation, in which all the pipes were hidden, and a hatch for communications was brought out on the side. Beautiful, practical and comfortable

BUILD A SPECIAL PIPE BOX

A special box for pipes - the method has taken root very well in many bathrooms in Russia. And this is not surprising, because the box, on the one hand, looks like a closet, and on the other hand, it does not block access to pipes.

Also, the boxes have several significant advantages over the same mounting in the wall - large, large pipes can be hidden in it, for example, like a sewer riser.

In addition, the box allows you to place a water heater and shelves inside, on which you can store household items and products for washing the bathroom and toilet. Also, this method is just perfect for a bathroom in which all the pipes are behind the toilet along the wall.

The pipe box can be made from drywall, chipboard panels.

As for chipboard and wood, the first should only be moisture resistant, and the second should have an impregnation that will protect the wood from moisture.

It is best to first change the old pipes for new ones so that they do not spoil the box due to condensate. Or at least put an insulating cover on the pipes, which will prevent it from forming.

The box has one significant drawback - in the event of a leak or other problems, you will have to disassemble it all, so you need to take care of the quality of the pipes and their connections in advance so that you do not have to re-do repairs later.

HIDE COMMUNICATIONS IN FURNITURE

It is just as convenient to place pipes in furniture as in a box. Visually, nothing is visible, but always at hand and within easy reach.

But in the case of pipes in furniture, you need to be sure of the quality of the pipes and the joints with which they were connected. Otherwise, the cabinet or cabinet is damaged and cannot be restored. Therefore, you have a choice - either change old pipes for new ones, or leave them open.

An idea that has become increasingly popular lately is hanging washbasin cabinets. Very fresh and stylish

In this case, it was possible to combine three in one. In one pedestal, they managed to immediately place pipes to the sink, toilet bowl and, along the way, hid communications for the shower cabin

FALSE CABINETS OR CURTAINS TO COVER THE PIPES

False cabinets or curtains to cover pipes are more decorative. After all, it is convenient in that it does not require a lot of costs and time for its implementation.

All you have to do is choose your favorite curtain and hang it in the frame of the washbasin.

This solution looks very cute and is ideal for a shabby chic or country style kitchen. And besides, in the event of a pipe leak, you can immediately notice the problem and fix it.

A door with false drawers, behind which the washing machine is actually hidden along with all communications. Original and comfortable

So, we have examined 4 simple and affordable ways with which you can easily hide water and sewer pipes away from the eyes of residents and guests of your home.

By following simple rules for the installation and quality of pipes, boxes and boxes will serve you for many years without requiring replacement and repair.

When carrying out repairs in the house, many are interested in how to hide the pipes in the bathroom, how to decorate the bathroom so that the highway and other communications are not conspicuous.

It should be added to this that it is important not only to close the pipes, but to do it in such a way that access to the network is free at any time.

In the organization of housing, everything needs to be carefully thought out, and in the bathroom this is especially important. This is due to the specifics of the room, which is inherently not large, so you need to compactly place sewer and water communications, furniture, etc.

The specificity of the bathroom lies in the fact that there is a distribution of pipes for water, for draining from the bathroom, washbasin,.

That such a question, how to close sewer or water pipes, should be thought out in advance.

Find out which pipes can be hidden

Before making a decision, you need to understand in detail some of the features of the connections. Some of them do not require special attention, because they are reliable. They can be hidden without fear.

And some types of connections require constant monitoring during maintenance. Options for how to close the pipes in the bathroom are shown in the photo. They should be studied before making a final decision.

You can completely hide:

• Steel pipes and joints made by welding;
• brazed copper pipe;
• Press fittings made of metal-plastic, crimped with special tongs. And they should only be of high quality;
• Plastic water pipelines that are mounted by soldering.

But, there are such types of pipe products that are not advised to be hidden:

1. Any threaded connection on pipes made of steel or other material;
2. Threaded fitting on metal-plastic, assembled with a key.

Hide the pipes with your hands in the wall

close in the wall. This method is the most popular. It is not difficult to cope with such work; in this situation, you can do without the help of professionals.

Before starting work, you need to prepare the necessary tools. If it is a water pipeline, then it is necessary to block it, if it is a sewer pipeline, then nothing additional needs to be done.

Then it is necessary to develop a layout of the highway and buy material for cladding.

Marking is carried out on the wall, a strobe will pass along it. Its dimensions are calculated so that the water pipe fits freely there.

And for the supply of hot water, the strobe is made a little larger, because when heated, it can expand.

Finished pipes are laid in a prepared recess and fixed with fasteners. These fasteners can be purchased at any building supply store.

This is a very simple method. But, this work is associated with a lot of dust and dirt. After all, before you hide the water pipes in the bathroom, the wall will have to be cut with a grinder. But, if you look from the financial side, then this method is the most profitable.

IMPORTANT! It is necessary to remember the following disadvantage. If a leak occurs, then the wall will have to be dismantled for repair.

Installation of a drywall box

How to close the sewer riser in the bathroom? In most cases, a drywall box is used for this, the installation of which can be done by hand.

How beautiful to seal a water pipe in a drywall box? First of all, you need to prepare materials and tools for installation:

• drywall and metal frame elements;
• pencil;
• knife and scissors for metal;
• screwdriver;
• roulette;
• level;
• drill and screwdriver;
• self-tapping screws;
• square.

Work order:

1. Markup.

When marking the places where the frame is attached to the walls of the room, use a level to ensure the verticality of the structure. Communications must be hidden by deepening at least 1 centimeter into the frame.

1. Installation of the metal frame of the future box.

Use a metal frame for mounting the box, as the wooden one is exposed to moisture and can quickly collapse. Fastening takes place with the help of dowels and self-tapping screws, the installation of fasteners must be carried out in increments of 50 centimeters.

1. Cutting and fastening plasterboard sheets.

Fixing drywall to the frame should be carried out every 30 centimeters.

1. Installation on a plasterboard box of manholes at the locations of cranes and other important elements (meters, threaded connections, and so on), so that, if necessary, repair could be done quickly and inexpensively.

1. Joint sealing.

A drywall box can be finished with any material: paint, tiles, wallpaper.

Watch the video

We mask under drywall

This method to date has significantly increased the number of its supporters. Because it is technological and simple.

How to close the water pipes in a drywall bathroom, photos clearly demonstrate. It can be seen that the plasterboard sheathing looks very aesthetically pleasing. In the same way, you can close the sewer pipeline.

As a disadvantage of this method, they highlight the fact that the room loses its size. This way, how to hide sewer pipes in the bathroom with drywall, is great for a newly built house, where the owners themselves determine how to place internal partitions.

It is not physically difficult to hide the pipeline in this way, and professional skills and knowledge are not needed for this. In old Khrushchev and panel houses, this method also finds its application.

Using plastic panels

This method has become popular due to its simple installation. The scheme of work is similar to how we made plasterboard sheathing. In this case, a frame is also constructed from metal profiles, and then it is sheathed with plastic.

IMPORTANT! It is not advised to lay sewer or water pipes inside the rack profile. Here they can be damaged by self-tapping screws.

How to close in a niche

Often niches are provided for the installation of water and sewer risers in many apartments. When there are, it is considered great luck.

Hiding communications in this case is very simple. The main advantage of this situation is that all the work is done without wasting space in the room.

The essence of this method is that tiles are brought over the edges of the niche. It should extend a few centimeters beyond the edge.

After the glue has dried, the seams are rubbed on the tile. On both sides of the edge that protrudes, a direct connection for plastic is glued.

Panels are loaded into it. They are placed horizontally. If something is not planned to be hung on this wall, then additional stiffeners can be omitted.

If you need to hang something on the wall, then in the places where it is planned, profiles should be laid. They are attached directly to the wall.

The described method is used in cases where it is necessary to provide a quick approach to the highway. If the quality of laying the network is impeccable, then the niche is allowed to be sewn up with drywall.

This work is a little more difficult than plastic sheathing. Because guide profiles are mounted to the edges of the niche. Jumpers are fixed on them. And after that, the structure is sheathed with plasterboard.

IMPORTANT! Provided that water meters are located in the niche, it is worth remembering that it is necessary to leave the hatch. The simplest option is considered a cut hole of the required dimensions, into which the hatch is glued.

Hide the pipeline in the floor

Speaking about the methods of placing communication, it is worth remembering another interesting way. You can close it in the floor.

This solution to the problem attracts by the fact that it is not necessary to perform gating. Pipes are laid on the floor slab and fixed. After that, the screed is poured.

As a disadvantage of this method, I highlight the fact that sewer pipelines cannot be hidden in the floor. They will have to be laid in the usual old method - in strobes.

Plumbing shutters

In search of methods on how to close the pipes in the bathroom, which they just didn’t come up with, the photos show various options for getting out of this situation.

And we can not say about another good and simple method. Its essence is simple - it is the use of sanitary roller shutters. In this situation, they perform a number of functions:

1. Close communications;
2. Reduce the noise of plumbing fixtures;
3. Increase the level of interior aesthetics;
4. Provides full access.

The advantage of this method is obvious. Roller shutters do not hide space, in the assembled state they are located in the box, and in the expanded position they close what is located behind them.

It only takes one simple movement of the hand to approach communications.

Hide using furniture

If the above methods cannot be used in the bathroom, then there is another very simple way. Communications are recommended to be placed in the design of furniture.

This can be done after all repair work is completed. It is best to do this when hanging cabinets, mirrors, cabinets are installed.

Furniture in this situation not only masks communications, but is also used for its intended purpose. It is very convenient that, if necessary, there is always full access to the pipes.

IMPORTANT! The high humidity of the bathroom places additional demands on the furniture. Waterproof materials are expensive, and not everyone can buy such a headset. In this case, it is recommended to install mechanical forced ventilation. So you can adjust the microclimate and provide the desired air exchange.

There are many ideas on how to hide pipes in the bathroom. Which way to go, everyone decides for himself. It all depends on the preferences and capabilities of each person.

The main thing is to approach this issue thoughtfully, and choose the option that is suitable for a particular room. Then you will be pleased with the new and improved interior of the bathroom.

How to hide communications with a false wall

If, when finishing a new room or seriously repairing an old one, all communications can be run along one wall, the best way is to install a false plasterboard wall, behind which you can hide all the pipes.

Advantages of the method:

1. Ease of mounting and dismantling.

Installing a drywall false wall to mask communications is much easier than installing a box of the same material, since most of the time you install entire (or large) sheets of material on the wall of the room, you do not have to do a lot of cuts.

1. Light weight.
2. Durability.
3. Ability to withstand heavy loads.

You can hang a large amount of plumbing equipment, shelves and other accessories on a false plasterboard wall without fear for its safety.

1. Versatility.

How to fix protruding pipes for supplying water to taps in the bathroom? In some cases, it is forbidden to ditch the walls, as this may adversely affect the bearing capacity of the building envelope. A drywall wall can be installed anytime, anywhere.

1. Wide range of finishing options.

Any finishing coating can be applied to a false plasterboard wall: paint, wallpaper, tile. If you chose the latter option, for maximum reliability of fixing the tiles on top of the drywall, install a special mesh.

Watch the video

The only significant disadvantage of this method of masking communications is a decrease in the volume of the room. This disadvantage can be eliminated by arranging shelves for storage in a false plasterboard wall.

Podium under the bathroom to close communications

Quite often, the most voluminous parts of the systems pass under the bowl. Of course, you can put it on legs and mount a decorative screen or screen, but the best way to hide communications under the bowl from a design point of view is to install a podium.

First of all, when planning a podium, you need to choose the material from which it will be made. A bathroom is a room with a high level of humidity, so not all types of materials are suitable for podium construction. You can use:

• High-quality drywall, resistant to prolonged exposure to moisture.
• Brick.
• Foam blocks.

The most convenient option is drywall, since the installation of this material is characterized by high speed and minimal complexity. The main thing when choosing a material is to take into account that a filled bath can weigh up to 250 kilograms, which means that you need to choose a design that can withstand such a weight without any problems.

Watch the video

How to hide communications under the sink: ideas

How to close the pipes under the sink in the bathroom? Ideas that are the most popular and interesting:

• Installation of drywall box under the sink.

This option allows you to achieve maximum compliance with the style of the sink room.

• Installation of a pedestal for a sink.

The cheapest and easiest way. At the same time, sewer and water outlets are located in one place, the main thing is to withstand the minimum slope of the sewer.

• Installation of a wall-mounted washbasin with a rear outlet and concealed installation in a box (or false wall) made of drywall.

• Installation of furniture with a built-in sink.

The most popular way, since there is currently a huge variety of furniture for sinks of all types.

Watch the video

Possible mistakes

Before closing the engineering systems in the bathroom or toilet, first of all, you need to make sure that the selected communications should be freely available. For example, hot water meters or a threaded connection where the likelihood of leakage is maximum.

In addition, you need to make sure that there are no violations of the systems when hiding systems. Quite often, many people forget about the necessary slope of the sewerage system when they hide it in a drywall box.

The most common problems that arise from errors in masking sewer and plumbing systems.

• Lack of access to faucets.

If you want to disguise systems even at the location of elements that require direct access, install special inspection hatches. Currently, there is a large selection of such elements, they differ in the way they open and design (for example, there are hatches that can be closed by disguising them as tiles).

• The occurrence of leaks.

The most vulnerable points of the water supply system are threaded connections. Monitor the tightness of the joints and the quality of the sealant used, and leave technological hatches for quick repairs if necessary.

• Difficult installation of additional elements.

Before repairing the room, determine the location of all household appliances. Otherwise, when you hide all the elements, connecting a new appliance (for example, a washing machine) will be quite problematic.

The main thing when installing sewerage and water supply systems is the use of high-quality materials and accuracy during work. Otherwise, even compliance with all the rules can lead to leaks with the subsequent need for costly repairs.

A little about the types of wiring

The main rule is that the pipes are laid in a certain sequence. Even those who do it for the first time can easily do this work with their own hands.

But serial wiring also has a number of disadvantages. The main one is that the pressure in such systems is unevenly distributed. This means that it is not recommended to turn on water in several consumers at once.

About collector wiring

In this case, a separate section of the water supply is used for each device. That promotes uniform distribution, movement of water on system.

No need to worry about people taking a bath if you need to turn on the washing machine or dishwasher.

Collector wiring assumes that the valve is individually installed on each pipe.

If any one section fails, it is not required to dismantle the entire structure.

The main disadvantage is that the arrangement of such systems is not available to beginners. And much more material is required than for serial wiring.

It is better to invite real professionals to solve such problems.

It is necessary to take into account several features, regardless of which method is chosen in a particular case.

1. We need to keep the system as consistent as possible.
2. There should be a minimum number of bends and knots in the highway.

Pipes with cold and hot water are not recommended to be twisted. The highway system should look like a single unit, like a simple fixture.

Washing machine, hot water tank, sink and tub are the main points. Another one should be added if the bathroom is combined.

Now you know almost all the ways to hide the pipes in the bathroom with your own hands. It remains only to determine the one that suits you and get down to business.

Entries

Repair in the toilet and bathroom is not only the installation of plumbing, but also the practical arrangement of space. Therefore, the second important question is how to hide all the pipes in the bathroom under the tiles.

The bathroom and toilet are a complex system of plumbing communications, but at the same time, I want to make the bathroom a zone for relaxation and rest: a cozy place with beautiful walls and a comfortable atmosphere. To do this, you will have to hide what looks foreign and alien to relaxation.

If you hide the pipes in the bathroom, the room will look more comfortable and beautiful.

Installation of a box with a metal frame for masking pipes

Such a box may become impractical, as it is difficult to dismantle. He needs a plumbing practical hatch or even hatches. If the design is collapsible or mobile, it will only benefit. Therefore, it is necessary to create such a box that would be as attractive, convenient and utilitarian as possible.

Material selection

The box in the bathroom requires moisture-resistant materials that are not subject to corrosion, mold and decay. Their small thickness and weight are desirable so that the building structures do not turn out to be bulky and do not hide space.
For the frame, galvanized metal profiles are more beneficial. A wooden frame in conditions of constant humidity is a risky material, but if you opt for decay-resistant wood species and treat them with an antiseptic, this will greatly increase its durability.

Drywall box example

For coating - sheet material - drywall, moisture-resistant and carefully processed plywood, plastic and even polyester-coated metal, for example. Drywall and plywood will require additional coverage, ceramic tiles, for example, while plastic or metal sheet is finished and does not need further finishing.

Installation of a box for water pipes

Important! Before starting the installation of the pipe box, it is necessary to check the operability of the entire water supply route and connections. If the plumbing or sewerage is made recently, then it is imperative to test the reliability and strength of all nodes and blocks for at least a few days.

Step 1. Make the necessary measurements, calculating: the thickness of the material, the joints on the pipes, coarse water filters, meters, thinking over the location and volume of the plumbing convenient hatch: its height, depth and width, the quality of the door and its functionality.

Step 2. Make markings on the floor, ceiling and walls. The marking of the frame is carried out from the floor, then with the help of a plumb line it is transferred to the ceiling and only then to the walls.

Important! The minimum distance from the pipes to the surface of the box is 3 cm

Step 3. Fix the profile to the walls with dowels and euro screws.

Installation of a metal profile for the box

Step 4. Screw the elements of the racks to the profile with metal screws.

Step 5. Mount the rails on the ceiling and floor. Horizontal and vertical guides are fastened with a cutter.

Step 6 Install jumpers on the frame at a distance of 50-70 cm.

Step 7. Sheathe the resulting box with drywall, plywood or plastic, not forgetting the hole for the plumbing hatch.

Important! When sheathing, it is better to use solid sheets, trying not to make many connections.
Important! During installation, use self-tapping screws at a distance of no more than 2.5-3 cm to a depth of no more than 1 mm.
Important! The frame of the future hatch must be installed before starting work with sheet material cladding.

Step 8 a. If the work was done with plastic, use liquid nails or other glue to hide the seams and corners with decorative corners, starting and finishing strips.

Drywall box frame ready for tiling or painting

Step 8 b. Prepare the surface of drywall or plywood for further painting or laying tiles: seal the joints and fasteners with putty, fix the outer and inner corners with a metal profile, prime.

Advice: The future plumbing hatch can be tiled: make it from a metal profile and drywall, like the whole box, or purchase it ready-made.

Sanitary hatch: functions and features:
It is worth repeating, the question of how to hide pipes is not limited to this. Another question is how to make all plumbing communications available for operation, including piping in the bathroom, a coarse water filter, and more.
The hatch should become a mandatory convenient design with a practical door. The easiest way is to buy it ready-made, since the construction market provides such an opportunity.