Buying new expensive furniture is a financially costly option. Alternatively, for those who love exclusive and unusual interior details, the handmade method is suitable.
Minimal tooling experience, imagination and creative thinking are all that is needed.
You can start by making a coffee table, for which a variety of unusual materials at hand are used.
The finished product will decorate and diversify any room, living room or nursery. Often, unusual furniture is installed in country houses and on summer verandas, where it emphasizes the style and brings the desired atmosphere.
Tools and materials
The basis of the future table is the material from which it is planned to make the tabletop. There are many options for fantasy, we will consider them below.
In addition, the following tools are required to work:
- hammer;
- scissors;
- pliers;
- fasteners (nails, screws, etc.);
- carpentry table with a set of knives (if any) or a hacksaw.
Working on a carpentry table requires additional skills. If available, you can use a chisel, cutter and plane. When working with a tree with their help, it will turn out to perform more delicate work.
With the help of a sharp cutter or a set of special knives, it is possible to skillfully decorate a coffee table.
You need to stock up on additional materials, such as:
- glue;
- sandpaper;
- paint (preferably in the form of a spray);
- primer;
- decor (fabric, multi-colored plastic, lace, glass details, etc.).
Wooden coffee table
The most common material in the manufacture of furniture structures is wood. Even in the case of choosing it as a basis, the creator has several options.
The product can be made from:
- pallets;
- a whole stump;
- logs.
A beautiful and practical coffee table made of pallets is carried out in several stages:
- At the first stage, it is necessary to determine the dimensions of the future table, and make markings on the pallets.
- Cut out the core of the pallet. It is important to consider that the outside should be smooth, and the back should be embossed.
- Treat the legs with a primer and let them dry.
- Paint the countertop from all sides. Tinting can be done in several layers. In this case, each layer must be treated with a fine-grained sandpaper.
- After all the parts have dried, fix the elements with metal fasteners: nails, screws, etc.
Making a table from a solid stump yourself is even easier. The difficulty lies in choosing a piece of wood that is suitable in size and shape. From the point of view of aesthetics, a pine, birch or poplar stump is suitable for such a table. The choice should be stopped on an even and wide specimen with unusual rings.
You can apply the material in different ways depending on the size of the table:
- short with thin metal legs;
- middle, where the base of the stump serves as a support;
- low on casters.
According to the idea of the performer, the stump can be subjected to minimal changes, limiting itself to painting or varnishing. Grinding and installing the wheels will help to give the product a classic look.
Note!
Another option for lovers of natural style, a coffee or coffee table made of logs. Its manufacture does not differ significantly from the previous versions.
The appearance of the finished product almost entirely depends on the appearance of the prepared wooden frame. Variants may differ in the width and expressiveness of the ring pattern.
First, you need to process the logs with a piece of skin. To preserve the most natural look, leave the bark on the sides and bottom. Legs made of metal or from an old table will give a more austere look. Supports can also be made of wood if desired.
Making a coffee table out of wood is not a difficult task. Such a product brings a certain amount of pristine and natural comfort to the atmosphere of the house.
Chipboard coffee table
Exclusive furniture based on chipboard is an economically viable option for those who want to work on the product on their own. This photo of a coffee table shows that such furniture outwardly is in no way inferior to a wooden product.
Note!
You need to start work with the development of a drawing of the future table. The finished patterns of the base and legs are applied to a chipboard sheet and outlined with a pencil, and then scratched along the contour with a nail.
Thus, you need to cut out two tabletops, one of which will be the surface of the table, and the other will be the bottom shelf. You need to attach flanges to them, and fasten the wheels with bolts.
Rubber casters are preferred due to their reliability. A glass shelf between the table top and the base will allow you to diversify the appearance. Coating with varnish will protect the thing from premature destruction.
You can make such a table with your own hands from old unnecessary furniture. Decor elements will help to renew and breathe new life into the old interior element.
There are many interesting options for coffee tables from: glass, a radiator, windows and books, an entrance door, a wardrobe or drawers from a chest of drawers, a suitcase, a coil (cable), etc. Additional options can be thought of by anyone who has imagination and sense of style.
Decorating
The decor of the coffee table is the final and very important stage of the work. Any ideas that fit into the interior of the room are suitable here.
Note!
Let's consider the most correct and harmonious options:
A table made of pallets, stumps or logs will be decorated with a carved drawing. The table top can be made not of solid glass, but of many pieces glued together.
The use of fabric in decor should be neat. For this purpose, a material with a thin pile is suitable. Use your old coat as a base and secure with small nails and rivets.
Vintage notes add lace and fringed ribbons attached to the perimeter of the piece. One gets the impression that a tablecloth is laid on the coffee table.
The use of twine and coarse hemp rope has recently become a fashionable trend. Fixing it is pretty simple. It is necessary to grease the surface of the table with glue, and tightly wrap the base and table legs.
The mosaic decor looks bright and unusual. Additional shine will be given by varnishing the surface.
Decorating using decoupage technique. This type of decor allows you to apply any image to the surface of the countertop. This will require special decoupage napkins. The quality of the result depends on the availability of the necessary technical knowledge skills.
In any finish, it is important to consider the practicality of the finished coffee table and its stability. Apply additional fasteners, stain and varnish for this.
It is not difficult to put ideas into practice if you approach the process with intelligence, imagination and great enthusiasm.
Diy photo of a coffee table
An integral attribute of every home is a coffee table. At first glance, it may not seem like the most needed furniture, the purchase of which is postponed for a long time.
But it is these interior items that make it truly cozy and comfortable. On the coffee table, you can place all the things you need that should be at hand: books, remotes, keys and other small items.
DIY wood coffee table
If you still have not been able to find the option that suits you or are having difficulties with the design, we will share with you ideas that will tell you how to make a coffee table with your own hands.
Wood coffee table will perfectly fit into almost any style of interior
Wood coffee table
Wood is especially popular among the many different materials from which furniture is made. If you take care of your wooden furniture properly, it will serve you for a very long time. In addition, by working on your own, you can create a unique piece of furniture.
To make a wooden coffee table yourself, you will need to prepare all the necessary materials and tools. You can put the finished structure directly on the floor or additionally make four legs on which your table will be located.
An example of how you can make a do-it-yourself coffee table from wooden pallets
By using multiple drawers, you can also create great coffee tables for your living room. Four large drawers tied together form a stylish side table. There is usually a gap in the middle of the boxes that can be decorated with various items.
Living room table made of wooden boxes
Photo: do-it-yourself coffee table
A coffee table made of wooden boxes is a great place to store all the necessary things
Diy rectangular coffee table
Modern look
You can also make a side table that looks modern and stylish. But before choosing a specific design for the table, determine the general composition of objects in the room. It is important to maintain a uniform style in every item that is used indoors.
Stylish wooden table with metal legs
Take a look at the retro style, which is also very popular today.
A true work of art - an elegant low coffee table made of wood
Effective design move - furniture duo in the living room
Decorating a coffee table
You can turn your coffee table into a stylish and trendy piece of furniture with decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.
Use textiles to decorate your coffee table to give it a touch of originality
Think about your mood. After a long day at work, you want to return to the atmosphere of tranquility, comfort and coziness. Therefore, for table decor, it is better to select elements that fit perfectly into the overall interior of the apartment and do not violate the harmony.
Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room
Materials and items that can be used more than once
A wooden pallet is a versatile item from which you can make anything with your own hands. Perhaps the easiest way is to build a coffee table, since the pallet is, in fact, a ready-made tabletop. It can be painted in any color, pattern, symbol or ornament. The legs can be castors or wooden blocks.
Turn a wooden pallet into practical designer furniture
Table design options depend only on your skills, preferences and, of course, the interior of the room.
Glass table top is able to set the tone for the entire interior
Suitcases and old radiators
Your old suitcase can become an integral part of your apartment interior. To make a table from it, it is enough to attach four legs. A coffee table made of a battery will also look unusual and original.
DIY coffee table from an old suitcase
Wooden coffee table on wheels in the interior
Feel free to experiment and create a fun atmosphere in your home.
Cozy reading nook with a round coffee table to hold a large number of your favorite books
Coffee tables are as relevant today as they were many years ago, they can be purchased separately from a soft headset or in a set, however, like all other pieces of furniture, the described one has a high cost, despite its small size. That is why you can make it yourself.
Coffee tables have relatively high prices in furniture showrooms, however, unlike other pieces of furniture, they are quite easy to make yourself.
Preparatory work
In order to make a wooden table yourself, you need to stock up on the following tools and materials:
- solid pine;
- water-based varnish;
- white spirit;
- acrylic paint;
- brush;
- self-tapping screws;
- electric jigsaw;
- screwdriver;
- radial grinder;
- milling cutter;
- drill.
As for the solid pine, it is necessary to purchase a material whose thickness is 25 mm. The dimensions of the workpiece for this table are equal to 1500x500 mm. This model does not require separate legs. To cover the table, you need 300 g of water-based varnish. Acrylic paint must be purchased with shine, which will give the product a tone, this tool will take about 100 g. how it will be impossible to get rid of sparkles.
Tools for making a coffee table.
The coffee table should be assembled using self-tapping screws of two sizes: 4x60 and 4x40 mm. For wood processing, an electric jigsaw will be used, which is accompanied by a set of saws designed for clean cutting of wood. It is preferable to use a self-clamping chuck, it is more convenient for the master when carrying out work. In any case, it should be possible to install a drill with a diameter of 10 mm in the chuck. The radial sander can be replaced with a conventional screwdriver, which has an appropriate attachment.
You can also abandon a hand router in favor of a traditional planer, since the first version of the tool is not available to every craftsman. More impressive bevels will need to be removed.
The drills should have the following dimensions: 10 and 5 mm, the first option should be used instead of a separate countersink. A set of bits with an extension cord will also come in handy.
When cutting the material, you do not need to try to calculate the size of the radius, for this you can use a traditional steel hula-hoop as a template.
Preparing for the build process
When making a coffee table, you have to complete two stages of product processing: preliminary and finishing. The first stage includes cutting, bevelling and grinding.
It is necessary to remove a chamfer of about 5 mm, it looks aesthetically pleasing and will not "eat up" the thickness of the tabletop externally. Even before the elements are covered with a tone, grinding should be done in three approaches in the area of the ends.
Drawing of a coffee table.
It is necessary to carry out such work using the technology below.
After you have managed to grind the sections, you should cover them with a layer of varnish.
You need to be prepared for the wood structure to bulge under the coating. After drying, re-sanding and varnishing should be carried out, this should be done until the smoothness of the cut is achieved. In this case, care must be taken not to damage the plane.
Wooden table mounting technology
When making a coffee table, before proceeding with gluing the elements together, it is necessary to prime the joints with PVA, which can be replaced with wood glue, then the surface must be left to dry. Planks with legs must be paired with self-tapping screws with dimensions 4x40, while when fastening to the tabletop, fasteners with dimensions 4x60 should be used.
The coffee table should not have a resinous surface; in order to get rid of it, white spirit and a large amount of rags should be used. It is advisable to carry out such work in an open space. Otherwise, the smell will remain in the apartment for a long time.
The varnish must be mixed with the glossy paint and cover the surface of the table. You can experiment a little with the remnants of acrylic by depicting patterns under the final layer of varnish, they will not be very noticeable and intrusive, they can only be seen in reflected light.
Wooden coffee table with legs
Coffee table assembly diagram.
The coffee table can be made by analogy with the above, but in the design it can also have legs. To do this, you have to use a blank from an array of the required size. It is necessary to saw off the material from the element on four sides (and not on two). The size of the table top of such a table can be equal to 950x650 mm. In this case, the array should have a thickness of 35-40 mm. A material with dimensions of 1280x980 mm will act as a blank for this table. The legs can be ready-made balusters, which can be purchased in the construction department, their top should be square, the side of which can be limited to 60 mm. The blanks for the legs can be sawed off so that the table is of the required height.
If you radially saw off the tabletop from 4 sides, then instead of the elements that in the first case served as legs, you will be able to get a ready-made base of the table from four parts. To fasten them, they must be pulled together with confirmations with dimensions of 5x90 mm. In this case, the blanks should form a rectangle, which should be screwed to the table top using corners. Do not forget that the elements of the "box" part must be sawed off to length, this will allow, after assembling the table, to obtain a structure of the correct shape.
When installing the legs, self-tapping screws should be used, mounting them from the inside. The reliability of the base box will be achieved by the fact that the timber structure on long elements is horizontal.
Thus, the model will gain legs. If there is a desire, then such a table can be turned into a dining table at the installation stage, for this it will be necessary to cut the legs, leaving a more impressive length. When making cuts with a jigsaw, you can make curly movements.
DIY table from drawers
You can also make a table from several wooden boxes. It should be remembered, however, that the plywood of the product is very thin. At the moment of screwing in the self-tapping screws, it can break along. For this reason, it is first necessary to make a hole in order to install the fasteners. If you make two holes in the board from different sides, then this will ensure that the crack does not appear at all.
For work, a sheet of plywood has to be prepared so as not to make the structure heavier. The boxes will not allow you to get a perfect square, therefore, before cutting the sheet, you need to lay them on the workpiece and draw a contour. The plywood must be stained.
For the table, you should purchase casters, which should be too low. It is necessary to strengthen them in the corners with some deviation from the edges. The drawers should be fixed to the lower countertop.
On this we can assume that the table is ready, it is recommended to varnish its surface in several layers. It is permissible to arrange a semi-antique table by covering its surface with a special varnish, which becomes covered with cracks during drying.
Do you love designer items, but sigh in frustration looking at the price tags that adorn them in stores? Try to become a designer yourself. Do you think this is difficult? Nothing like this! Following the instructions, you can easily create do it yourself original a piece of interior from scrap materials. And we suggest starting with coffee table- such an uncomplicated but very important subject furniture... Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you literally fill your House warmth and put a piece of your soul into it. So it's definitely worth a try.
Do-it-yourself coffee table in a marine style
Idea in the "romantic" style. All year round, sipping your favorite drink at this table, you will remember the warm sea, gentle surf and moonlit path. " Nautical»A table is tenderness, sophistication and originality in the very heart of your home.
How to do it?
1. Take an old window frame and clean it of dust and dirt. If the former glass cracked, insert a new one, and then get rid of the layer of the old paints and sand the surface. Next, remove the metal corners, which additionally fix the parts frames.
Ready! Enjoy your creation and bring joy to your guests!
Suitcase table for travel lovers
A very original solution for an old beloved suitcase, which has seen other lands with you and which you do not want to throw away because of the memories.
How to do it?
First, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a movable table, then you need to take wheels. You will also need plywood, screws and a screwdriver.
Now we make markings at the bottom of the suitcase for future legs and drill holes. Since the legs cannot be attached to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and attach the legs. Using hot glue, glue the felt inside the suitcase.
To give the table an original look reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate at your discretion.
That's all - the unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: by choosing legs to your liking, you can make a table in style retro or classical... You don't have to attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring to the interior a sense of adventures and adventures, the spirit of travel and unknown distant countries.
Log table for nature lovers
We take wooden beams (in this case, birch) of the same height and width, 32 pieces in total. You also need to take a base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wooden surfaces.
First you need to assemble the base for the table, then glue wooden beams around the perimeter, and sew up the middle with cardboard. Then we screw the legs to the bottom. Next, we glue thin wooden dies to the inner surface - thanks to this, it will seem that the table is completely wooden. Now we take the putty and carefully fill up all the voids, and then rub over until an absolutely flat surface is created. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.
If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).
For pasting the frame, we take the branches, from which we first remove the loose bark (we do this with sandpaper). What is the order of pasting: first we glue the branches on the long side of the table, and then we select wooden dies and, how mosaic, lay them out on the ends. The dies should be about 1 cm thick and can be cut with a parquet or circular saw. And finally - install the glass, which will be the table top. If desired, by screwing the wheel supports to the table, it can be made mobile.
Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.
Original pallet table
An idea that came to mind of someone truly brilliant. It would seem that one can come up with pallets that are probably lying around in every summer cottage? And you can make a very convenient and functional element of the interior out of them.
How to do it?
First, collect all the tools necessary for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue for wood, wheels, soap, a primer, a screwdriver. In addition, use paint brushes, a petal drill brush with an abrasive bristle brush, varnish, and a colorless primer.
First of all, you should take a drill with an attachment designed for wood processing, and clean the surface of the boards from dirt. Now carefully disassemble the sanded pallet into pieces. Use a large hammer to lightly knock out the rusty nails and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. Clamps are needed at this stage. They need to gently grip the boards and wait until they dry out.
Now the parts prepared for the countertop need to be nailed and glued on the reverse side, then clamp them with clamps and wait until they dry out.
Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill the holes for the fasteners. To make the screws easily enter the wood, lubricate them with soap. Using the ratchet wrench, you can quickly and conveniently tighten the hex head screws.
Stylish, compact and quite functional table is ready!
Drawer table
Another original idea captivates with its simplicity and unexpectedness - well, who would ever dream of building a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea at its true worth.
How to do it?
Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.
First you need to oshuk the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. With the help of wood glue, you need to fix the dowels at the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!
Such extraordinary things can be created from quite ordinary materials. Having imagination and the desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance of turning into an interesting element of the interior?
Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?
A coffee table is, at first glance, not the most necessary furniture. Therefore, its acquisition is endlessly postponed. But it is these items that make the interior truly cozy and comfortable. Therefore, we are sharing ideas that will tell you how to make a stylish coffee table with your own hands and not go broke.
1. Democratic and affordable
To make such a table, you will need a pair of metal or plastic boxes and two large boards. Do not forget to securely fasten the structure.
2. For the smartest
Books with beautiful covers and a small glass for the table top are all the materials for such a coffee table. The books must be glued together, and the glass on them can be fixed with silicone glue, which becomes transparent after drying.
3. Orderly chaos
A coffee table made of flat elements fastened together in a chaotic manner is an idea that is easy to implement. Wooden cuts, pieces of planks, large books will do.
4. Industrial style
A reel for industrial cables is a thing that cannot be found on every corner. But if you are still lucky enough to become the owner of this item, you can make an excellent coffee table out of it.
5. Table for motorists
A car tire coffee table will last for years. But it is advisable to use the tire without damage. It remains only to paint it, fix the table top and legs.
6. Wooden table almost free
Regular pallets, which can be purchased for a penny, are an excellent material for making furniture. A bit of imagination and a wooden coffee table is ready.
7. Second life of old boxes
Another way to become the owner of a natural wood coffee table is to use old drawers as material for making it. Four large drawers stapled together form a stylish table.
8. Extravagant chic
Particularly original, but at the same time luxurious, looks like a coffee table with asymmetric legs. The table top is made from a thick board or a wooden saw cut.
9.From the cottage - to the living room
Large wooden barrel easily converts into a coffee table. It must be cut into two parts, and then the table top and legs must be attached to one of them.
10. Roomy and functional table out of the box
A plastic or wood utility box can also be used as a coffee table. In order for the table to be mobile, you can fix small wheels on its bottom.
11. Warm table
An old heating radiator is a reliable basis that will help you make a coffee table with your own hands. You just need to paint it in the desired color, attach the wheels and put thick glass on top.
12. From the interior door
An interior door that has served its time becomes a material for making a coffee table with your own hands. It must be cut into several parts and fastened together.
13. If it's a pity to quit, and it's hard to carry
An old suitcase can become an original coffee table top. You just need to attach legs to it.
14. Brutal elegance
An affordable option for making coffee table legs is ordinary plastic or metal pipes connected by fittings. Such furniture will perfectly fit into a loft-style interior.
15. From ordinary wooden beams
Staggered wooden planks will become a countertop for a homemade coffee table. The legs can be made from thick metal wire.
To make the interior look harmonious, it is necessary to take care not only of the details, but also of the decoration of the room. Continuing the topic -